Search

The paper obtained during the study was mainly obtained from wheat straw cellulose and Jerusalem artichoke cellulose, which contained chitosan of various concentrations. An increase in the mechanical properties of the obtained papers was observed in samples using the substance chitosan. A 1.0% chitosan was added to the paper, mainly based on various plant celluloses. It should be noted that the obtained paper products were used without bleaching due to the fact that it was recommended to use them for wrapping paper. The youngest results were observed in samples prepared from a composition of wheat straw and artichoke pulp. From the fiber morphology, it was observed that the sized paper fibers became stronger, denser and smoother. Keywords: chytazone, Natural polymers, fibers, cellulose. Biocomposites of chitosan (CS)/cellulose nanocrystals (CN) were prepared by using solution casting method. Influences of solution preparation method and CN content on the properties of composites were investigated. Mechanical stirring/ultrasonication or micro fluidization were used to disperse nanocrystals in the chitosan matrix. The prepared nanocomposites were characterized by FTIR, XRD, SEM, DSC, TGA, TMA and contact angle measurements.

The filter paper bio-templating method has become a promising pathway in the fabrication of MgO with tunned physicochemical features. The filter paper-templated MgO (MgO-FPT) has been subjected to several characterisation analyses, and it has revealed that filter paper templating has demonstrated a positive outcome toward an improvement of physicochemical features, i.e., improved surface reactivity and surface area compared to MgO prepared via direct thermal degradation method of magnesium salt (MgO-CT). As the evidence of the FTIR spectra, the MgO-FPT has demonstrated a surface rich CO2-associated functional group, which indicate the enhanced surface reactivity of the MgO, which increase of the adsorbent affinity toward CO2 (even from atmospheric surrounding). Together with the improved structural features compared to MgO-CT (two-fold high surface area), it has significantly refined the CO2 adsorption uptake capacity to almost 15 times higher than MgO-CT with only 0.247 mmol/g. This shows the potential filter paper bio-templating method for the metal oxide-based adsorbent fabrication for CO2 adsorption application.

A chitosan based coating was prepared where eggshell powder was added. Eggshell is a product that appears in large numbers in everyday life, so it has great potential as waste, which can be used to turn it into a valuable material. Cellulose sheets were made from secondary fiber, and after coated with the chitosan based solution to investigate the properties of the sheets. The results of the treated handsheets were compared with the results of the control sheet. The control sheets were compared with 4 different type of paper: coatings of chitosan with 5wt% and 10wt% eggshell powder, only chitosan coating, and paper where eggshell powder was added to the paper pulp. The use of the eggshell powder as an additive in the coating would be a promising material, because it can improve in a large extent the water resistance and the air barrier properties of the paper.

The Paper industry is an energy-intensive and one of the most energy-consuming industries in Indonesia. In this study, Paper Mill energy sources come from coal and renewable energy such as black liquor as a substitute for coal and on-grid 9MW PV system are reassessed by using optimization software, HOMER. This study aims to present a feasibility study of increasing the use of renewable energy sources in Paper Mill to reduce coal consumption for more sustainability. The software HOMER is used as a tool to determine the most feasible combination of component considered in the study. It is feasible to reduce 10,84% coal consumption kg per year with the optimal renewable energy mix consisting of additional 24MW rooftop PV system and 5,94kW hydrokinetic energy from Kampar River located 6 km from the plant. Renewable fraction increased to 16%. This study result is good for sustainable growth of Paper Mill business that investments in climate and nature to support the Indonesian government in achieving net zero emissions.

In this study, cellulose was extracted from Heliánthus tuberósus (Jerusalem artichoke) stems, and its quality indicators were thoroughly investigated. The isolation process involved the removal of impurities and non-cellulosic components, resulting in a purified cellulose sample suitable for further analysis and application.To explore the potential of Heliánthus tuberósus cellulose, composite paper was produced by incorporating basalt fiber into the cellulose matrix. The resulting paper was subjected to comprehensive testing to evaluate its mechanical properties, with a particular focus on tensile strength and tensile length.The tensile strength of the composite paper was determined using standardized testing methods, providing quantitative data on the material's ability to withstand applied forces without breaking or deforming. Tensile length, on the other hand, refers to the maximum elongation the paper can undergo before rupture occurs. These properties were assessed to gauge the overall performance and suitability of the composite paper for various applications.The obtained results were presented in a clear and concise manner, utilizing tables and graphs to facilitate data interpretation and comparison. Tables allowed for the tabulation of the measured tensile strength and tensile length values, providing a comprehensive overview of the material's mechanical characteristics. Graphs were employed to visualize trends, patterns, and potential correlations between different variables, aiding in a deeper understanding of the composite paper's behavior under various loading conditions.

Abstract. In this study, a composite material was successfully produced by incorporating waste paper and basalt fibers. The utilization of waste paper as a raw material contributes to sustainable practices and waste reduction. The physical and mechanical properties of the obtained composite material were comprehensively investigated to evaluate its potential for various applications.The physical parameters of the composite material, such as density and porosity, were measured to assess its structural characteristics. Density provides insights into the compactness and mass per unit volume of the composite, while porosity indicates the presence of voids or open spaces within the material. These parameters play a crucial role in determining the overall performance and suitability of the composite for specific applications.Furthermore, the mechanical properties of the composite material were examined to evaluate its strength, stiffness, and durability. Tensile strength, flexural strength, and impact resistance were among the key mechanical parameters studied. Tensile strength determines the material's ability to withstand pulling forces, while flexural strength measures its resistance to bending or deformation. Impact resistance evaluates the material's ability to absorb energy when subjected to sudden or dynamic loads.

This review paper presents a comprehensive analysis of the mitochondrial DNA (mtDNA) of Apis mellifera, commonly referred to as the Western honey bee. The present study aims to examine the genetic diversity, population structure, and evolutionary history of a species of insect that holds economic significance. This study elucidates the genetic determinants that impact the adaptive capacity, behavioral patterns, and overall well-being of honey bees through the examination of mitochondrial DNA (mtDNA) sequences derived from diverse honey bee populations across the globe. Furthermore, this study examines the potential implications of mitochondrial DNA (mtDNA) research on various aspects of beekeeping practices, conservation initiatives, and the comprehension of honey bee biology. This paper serves as a significant asset for researchers, beekeepers, and conservationists with a keen interest in exploring the genetic characteristics of Apis mellifera

A worldwide evaluation of the present status of renewable-energy generation, with a focus on photo-voltaic (PV) solar energy for the production of electricity. The most pertinent elements of the development and experiences of nations working to build and use these technologies are covered in this article. It also cites studies that highlight the efforts made by nations to reduce their emissions of green-house gas or to enhance the quality and accessibility of electric energy generation in light of their unique geographic and environmental circumstances. These studies focus in particular on remote communities that have limited access to the national power grid due to technological or financial constraints. This paper focusses on renewable-energy might serve as a starting point for assessing how clean energy affects the world's energy supply and demand, they are becoming an increasingly popular option in terms of cost and efficiency, which can attract new investors. By analysing recent data, case studies, and literature, this review aims to provide stakeholders with insights into the achievements and hurdles of solar energy, fostering informed decisions towards a sustainable and resilient energy future.

Inulin is a source of fiber that can be used as a functional food. Foods that contain inulin can help overcome health problems such as obesity, colon cancer risk, lower blood sugar levels and reduce insulin resistance. The purpose of this paper is to summarize some research results on inulin content in tubers and their extraction methods. The inulin content in dahlia, gembili, uwi, potato, sweet potato, jicama, onion and garlic tubers are 74%; 15%; 12%; 7%; 13%; 41% and 33%, respectively. Extraction methods used include ethanol:water precipitation, microwave-assisted extraction, hot water extraction and ultrasound. In the future, inulin is expected to contribute to the treatment of digestive-related diseases.

The integration of solarcellsinto construction materials, such roof tiles, isgaining traction. Nevertheless, solarcells' conversion efficiencyistemperature-dependent, and a high temperaturewouldlowerit. This study examines the functionality of mortar roof tilesthat have builtinsolarcells and safety glass. To control the temperature of the solar cells, phase modifying materials (P CM) are added to the first roof tiles at a concentration of 3% by weight.For solar roof tiles, the impact ofPhase change materials on the generation of solar-to-electrical power isassessed, and life cycle costanalysisiscarried out to determine the viabilityfrom an economicstandpoint.During six summerdays, the electricalenergy production of the solartileswith PCM appliedwas 4.1% higherthanthat of the tileswithout the component modification material. In contrast, during six winterdays, the improvementisbetween 2.2 and 4.3%. With the cost of the inverterincluded, the solar roof tileswith Phase change materials have an economicalpaybackperiod of 5.7 years. The application of Phase change materialsraises the initial cost of roof tiles by 1.2% ;nevertheless, the paybackperiodispredicted to bethreemonths shorter thanthat of the equivalentwithout PCM, given an overallimprovement in energy production of 4.1%.Whilemany countries are takingsteps to reducetheiremissions, the IEA’slatest report on global and carbonemissionsshowed an increase of 1.7 percent in emissionsyear-onyear2018 to 33.1 billion tons (IEA, 2019). Australia's 2018 increase in carbondioxideequivalentemissions of 0.7% raisesseriousconcerns about the countrysability to meetitsemissionreductioncommitmentunder the Paris Agreement (Cox, 2019).

Today, the industrial world is experiencing intense competition with challenges related to environmental issues, and the domestic paper industry is no exception. This study is a follow-up of the research conducted by Palupi et al. (2015) at Company X which, through an LCA study, found an acute water ecotoxicity value of 7.16 kPt, a chronic water ecotoxicity value of 6.5 kPt, and a soil human toxicity value of 2.69 kPt. However, that study did not come with a SWOT matrix. Therefore, using a desk study,the present study aimed to map a SWOT matrix. A desk study based on SWOT analysis from 12 international journals and two national journals sourced from Elsevier, IWA Publishing, MDPI Publisher, Taylor & Francis, and Garuda was used to determine the SWOT matrix. Desk studies have the objective of comprehensively evaluating published journal articles, books, and other sources on given problem domains.Based on the results of the study, some recommendations for actions on the internal and external factors of the company are offered, consiting of steps for the company to mitigate identified weaknesses and threats.This study found that most of the pulp and paper industry engaged in internal strengths and external opportunities and faced numerous internal weaknesses and external threats. Currently, Company X occupied the first quadrant (Growth), indicating that the company was in a highly profitable condition. The company was enjoying many strengths and opportunities. Therefore, it is critical for the company to use its strengths to capture opportunities to minimize its emissions to the environment and to implement LCA in the company.

Paper-based microfluidics offers a simple, cost-effective, and versatile platform for fluid manipulation and analysis. Despite significant advancements in paper fluidics, the flow control in paper channel remains a challenging task. In this regard, we have developed a flow delay channel in paper using rectangular tape patterns on the paper surface. We have investigated the effect of hydrophobic tape barriers with varying widths. The designing and cutting of the hydrophobic tape and paper channel was performed by CO2 laser machine using CorelDraw software. Once cut, the tape barriers were attached to the paper surface and then passed through the roller press machine for proper adhesion of tape pattern onto the paper’s surface. From experiments, we observed that by increasing the width of tape, the delay also increased. The hydrophobic tape on the paper surface caused resistance to the flowing fluid. Due to this surface resistance, flow velocity reduced, and the time delay increased. We believe that our novel approach will provide an alternative method of flow control for paper-based microfluidic devices and can be utilized in various food quality sensors and lateral flow devices.

This paper aims to report the investigation of the effect of online news items on students’ writing outcome of English as foreign language context. This research used quantitative methods with quasiexperimental research designs with non-equivalent groups’ pretest-posttest design. Two groups which 46 students were the experimental and control groups and both groups were given with some different treatments. Those treatments were given in a balanced and intensive manner without intervention from factors beyond the researcher’s control. The tests were then employed as the instrument to gain data with ANCOVA as design of analysis technique and SPSS as media to compute. The findings showed that online news items have strengthened students’ writing abilities and motivated students to write related problems. The results obtained from this study proven that the P-value (0.016)

Capital structure is the combination or proportion of various sources. An organization can procure funds by issuing equity shares, preference shares and debentures to the public. Apart from this, they may also borrow from the banks or financial institutions. These are the various sources available for a concern for procuring or mobilizing the capital. Whether capital is needed initially or additional fund needed for the smooth function there are various sources available for mobilizing the capital or fund. While designing the financial or capital structure manager has to consider the overall cost which will incur after constructing the capital structure. Paper industry is selected for the research. Five companies listed in the Bombay Stock Exchange were selected for the study. An attempt has been made to study the components of capital structure of paper industry.

In this article the possibility of using licorice root waste as a fibrous raw material in the pulp and paper industry is investigated. It is shown it is possible to add up to 25% of bleached cellulose from licorice root waste to the paper composition for the production of writing paper.

Land degradation has a big influence for Central Asia. The territory of Central Asia is rarely discovered and it can be seen by the number of published papers in English. There is a high potential of applying remote sensing (RS) and geographical information systems (GIS) for the mapping and monitoring of degraded lands. In the present research we tried to collect all Scopus-based publications in English for 20 years using land degradation as a keyword. We analyzed the most popular journals, top authors, top-cited papers, top countries, and the role of remote sensing (RS) and geographic information systems (GIS) in the land degradation issues of Central Asia. RS and GIS technologies are good tools, but in Central Asia researchers have to spread them widely. Data-sharing systems and lack of international cooperation could bring more joint projects and publications on land degradation issues.

The improper use of pesticides and excessive doses in the long term contribute to climate change and even threaten human health, organisms, and the balance of the ecosystem. A pesticide detection device is needed to monitor its levels to minimize risks to human health and the environment. A paper biosensor was developed in this study to detect organophosphates by utilizing the enzyme acetylcholine esterase (AChE) and silver nanoparticles (AgNP). The Whatman filter paper was used as a visual OP detection zone. AgNP, as an indicator, is adsorbed and gives a brownish-yellow color to the paper, while AChE is immobilized into the film and layered on the paper. The addition of acetylthiocholine chloride as a substrate to the film released thiocholine products which could replace the capping AgNPs causing the AgNPs to aggregate and the paper color to pale. The presence of OP in the sample will inhibit AChE activity so that paper fading is reduced. The biosensor response is quantized as an RGB value, which is determined using an application on a smartphone. The resulting biosensor has excellent performance with a linear range of 0.05-2.00 mg/L, a detection limit of 0.04 mg/L, and a CV of 0.48%. Biosensor measurements on vegetable samples showed conformity with the GCMS results as the standard method. Therefore, this biosensor is suitable for the on-site detection of pesticides offering easy, fast, and inexpensive analysis.

Agricultural products, including root fruits, make up a large part of a person’s vital needs. Therefore, cultivating root fruits and harvesting crops without harm is one of the main tasks of agricultural events. Considering the above, it is of great importance to have information about the scientific research and scientific results achieved by our scientists in this field. To this aim, a bibliometric analysis of articles on root harvesters published in the Scopus database between 1982 and 2022 was used to understand the current state of studying cultivating agricultural products, including root fruits, and harvesting their crops and to provide references for future studies. To carry out this research different tools such as Office Excel 2021, VOS Viewer and Mapchart.net were used. The literature retrieved totaled 201 articles, of which 70% were research papers. During the last four decades, the quantity of published papers has increased significantly. For example, there were 22 papers published in 2019, 22 times increase over the number of papers published in 2002 (1 paper). It was found that the top five countries that published the most literature were China, the United States, India, the United Kingdom, and Canada, which published 44, 43, 12, 12, and 10 articles, respectively. During the chosen period 159 authors from 58 countries contributed to the given field.

This paper discusses the potential of paper-based microfluidic devices for affordable diagnostics, and the importance of flow control. We have explored the variation of the width of paper, effect of 2D flow, and altering the surface wettability of paper to increase the resistance to fluid flow by physicochemical barriers. We used Whatman filter paper No. 40 and No. 1, mustard oil, and oleic acid, to examine the fluid flow due to capillary forces. Moreover, the effect of increase in thickness of the storage reservoir to decrease flow rate in the paper was also investigated. The experiments provide valuable insights into the behavior of fluid flow in porous media, and the findings have important applications in biomedical diagnostics and environmental monitoring.

This article observes the problems in the study of perspective species of the family Coccinellidae worldwide: a review of papers from the Scopus database published in English for the period of 2007-2021. Trends of publications in the family of Coccinellidae, various journals on Coccinellidae family, authors and their affiliated country, top countries in the study of the Coccinellidae family were analyzed throughout the article. Relying on the results of this analysis, it was found out that paper publishing beat records from 2007 to 2021 with 120 and 62 respectively. Also, number of journals that are frequently used by scholars worldwide were studied. There, top 15 journals were chosen by scholars to publish 721 (44,23 %) of their papers. Countries that held the largest number of researches on the Coccinellidae family was also considered in our article. We identified funding institutions, among which National Natural Science Foundation of China has possessed the largest number with 40. Last but not least, the most influential and productive countries, including China, Brazil, and others, were recorded in our research.

The article considers the problem of recycling waste paper and the main reasons for the deterioration of paper-forming and physical and mechanical indicators of finished products during recycling of recycled fiber. A study was carried out on the effect of increasing the number of recycling cycles of waste paper of the MS-8V brand on such indicators as fractional composition, breaking length and resistance of paper to punching when using a jet-barrier type knifeless grinding unit.

Contamination of recycled paper and board food packaging by mineral oil hydrocarbons caused several crises in the past years. Although the migration from paper and board to foodstuffs has been proved many times, the contamination mechanisms and causalities remain undetermined and face unresolved issues. This study takes part in the collaborative project FoodSafeBioPack, which aims at evaluating the migration of potentially carcinogenic polyaromatic molecules from recycled paper and board packaging to food. New chemical imaging methods are used to follow this contamination at the microscopic scale (fibers and fibrous network). The first images acquired of polyaromatic molecules distribution on fibers were used to develop a methodology that will help to follow their migration. The influence of using different solvents and molecules on the initial chemical potential is discussed. The description of the paper structure and initial conditions of transfer will support the development of a microscopic mass transfer model.

Cellulose and paper products are produced from cotton wool in our republic. Since 1995, the production of these products has increased several times. Nevertheless, 10% of the demand for pulp and paper products in our Republic is met. uring 1988-1993, this growth was 6%, which was 3 times higher than wood pulp production. Extraction of cellulose from annual plants is well developed in China and India. 77% of the world's cellulose obtained from annual plants is produced in these countries. The People's Republic of China gets 50% of its paper output from annual plants. Cellulose was obtained from plants containing cellulose, and their properties were studied. Paper products were obtained from the resulting pulps and its quality indicators were studied based on the standards applied to papers used in industry.

Chitosan occurs in different molecular weights and degrees of deacetylation. Molecular weight and degree of deacetylation are the main factors affecting particle size, particle formation and aggregation. The use of chitosan improved the dry strength of the paper, especially by adding 1% low molecular weight chitosan. But the increase in concentration reduced its dry strength. This can be explained as follows. The connection must correspond to the distance between the segments between the fibers, because they form an inter-fiber connection area. Even if the water molecule is separated from the organic bond with the fibers or not, a large amount of water destroys the bond state of the paper. These factors are important in the paper industry. Paper-like materials were obtained on the basis of cellulose obtained from the stem of the flax plant. The effect of fibers and adhesives in the composition on the quality indicators of the obtained paper was considered. The effects of chitosan and starch glue were compared. It can be explained that the hydrogen bond on the fiber surface is mainly monopolized by the water molecule, because the fiber forms a macroscopic liquid bridge. The weakness of this bridge indicates the wet tensile strength of the paper.

The effects of chitosan, starch, and polyvinyl alcohol (PVA) were studied to improve the surface properties of cellulose-based paper obtained from local raw materials. Polymers are incorporated into the paper canvas by spraying. The results showed that the addition of chitosan to paper webs made from cellulose fibers has improved surface properties compared to the effects of other additives. The effect level of starch was similar to that of chitosan, but it resulted in a lower water absorption potential of paper than chitosan at the same concentration. In many other properties, particularly for printing papers, the most important property being surface smoothness, chitosan treated papers are superior to starch or PVA treated papers.

The prospects for obtaining bioethanol based on secondary bioresources of the pulp and paper industry are discussed in order to close economic cycles. The transformation of sugars of acidic hydrolyzate of deciduous wood into bioethanol by batch culture of a selected strain of the yeast Saccharomyces cerevisiae with a combination of various xylose-assimilating yeasts was studied. The ethanol yield from hexose`s part was 46% from fermented sugars, its concentration reached to 9,0±0,6 g l-1. The use of pentose sugars under microaerobic conditions (concentration of dissolved oxygen 0.5-3.0%) gave the efficiency of ethanol production up to 26.7 - 35.5% from fermented sugars. The ethanol concentration in terms of the pentose`s fraction was 3.9-4.5 g l-1 (the yeast Pachysolen tannophilus); 5.2 g l-1 (the yeast Candida tropicalis); 5.6 g l-1 (the yeast Candida shehatae). The total amount of ethanol obtained from both hexose and pentose parts after distillation was 4.2-4.6 g (5.2-5.7 ml) with alcohol by volume 96%.

The way to determine the total microbial contaminants in fresh milk is by the Total Plate Count (TPC) method. The TPC method requires 48 hours, high analytical skills, and high analytical costs. The aim of this research was to design a rapid detection tool for microbial contaminants in fresh milk called Paper Stick Test Kit (PSTK), which is fast, cheap, and easy. The stages of research designing PSTK are: (a) making PSTK, (b) testing the optimal time for using PSTK, and (c) making standard color maps. The results of this research are: (a) the best PSTK is made from cardboard with color indicators made from a mixture of bromothymol blue 0.3 g/250 ml solvent and NaOH 0.01 N; drying PSTK is best done in an oven with a temperature of 100oC, for 20 minutes; (b) the optimal time of application of PSTK in fresh milk is 20 seconds; and c) standard color maps are based on the correlation between microbial contaminant levels in fresh milk and color levels in PSTK dipped in microbial contaminated fresh milk.

Since the federal, state, and local levels of government in Malaysia have all initiated the e-participation project as an integration of the national e-government initiative and combined communication-based applications consisting of government-to-citizen (G2C) orientation, assessment studies have discovered that the delivery of this project carries multiple issues. These include minimal digital knowledge, a lack of awareness, the requirement for more government support for the project, and other factors. This has resulted in certain entities not making the most of e-participation tools. Thus, this review paper intends to examine some relevant acceptance factors of the Malaysian government's e-participation programme, which has received significant investment. This study methodology used the Unified Theory of Acceptance and Use of Technology (UTAUT) and the Technology Readiness Index (TRI) to build the research model for this study by exploring the relevant books, journals, online materials, and study reports linked to the e-participation acceptance in Malaysian public sector. The UTAUT and TRI factors may influence the likelihood of its adoption by all Malaysian governments and citizens, which will encourage them to support the use of e-participation in the public sector in Malaysia. The proposed model will evaluate the individual acceptance of e-participation in the Malaysian public sector. This study is anticipated to provide several guidance to relevant parties, particularly the Malaysian Administrative Modernisation and Management Planning Unit (MAMPU), which is one of the most prominent government agencies in Malaysia responsible for modernising and reforming the public sector through the digitalisation process, and other related government agencies in Malaysia. For future studies, additional empirical qualitative and quantitative methodologies are required to validate the findings of this study.

Today the world is facing a major problem of getting rid of wastewater safely so that it does not disrupt the environment. This study analyzed global research trends through wastewater treatment technologies from 2000 to 2020 using Scopus databases. The objective of this article is to carry out a bibliometric analysis regarding the production and impact of scientific research related to wastewater treatment indexed in the Scopus databases. The purpose is to know key aspects such as the progression of production over the two decades, maturity in research, coverage of the subject, identifying the most discussed topics and as a result of identifying the gaps, the most relevant authors and the core of journals through which knowledge in this area is disseminated, as well as its impact through the analysis of citations. Scopus revealed a total of 44 journal articles, 19 conference proceedings, and 1 review paper during this period, with the keywords’ wastewater, treatment. As per the analysis, Kazakhstan and Uzbekistan painted the greatest publications connected with wastewater.

At present, there is not any MTI graduation test system in China, although the enrollment of MTI students witnesses an increase. This paper presents MTI graduation written test construct and design of syllabus. It then elaborates on the test construct, modules, which is intended to clarify the purpose, significance and contents of MTI graduation test and shed new light on future large-scale test development and improvement of cultivation quality of MTI graduates.

Buildings carry people's emotional thoughts. Paper Bamboo House establishes an emotional connection between space and people through characteristic ecological materials, pays attention to people's true perception of buildings, and emphasizes the rhythm of architectural form and rhythm. The architectural design needs to explore the possibility of space existence from the regional culture, rebuild the relationship between the building and the surrounding environment, strive to create a harmonious building that coexists with nature, and practice the regional practice of low-carbon architecture. Advocate to use the comprehensive thinking of reason and art to explore the meaning of space and form.

Medical imaging is currently using artificial intelligence-based technologies to aid evaluate diagnostic information images, particularly in enforcing kidney stones. Artificial intelligence technology continues to develop, many studies show that deep learning is more widely used compared to traditional machine learning, so an Artificial intelligence system is needed to assist the accuracy of health diagnoses, thus helping in the field of radiology health. The aim of the research is to use artificial intelligence with deep learning models to help detect abnormalities in the kidneys. This research method is a literature review of Scopus data related to deep learning in medical imaging in detecting kidney stones. The results of using Artificial Intelligence in medical imaging can be used in diagnosing diseases including detecting Covid-19, musculoskeletal, calcium scores on Cardiac CT, liver tumors, urinary tract lesions, examination of the abdomen and kidney stones. Utilization of Artificial Intelligence in detecting kidney stones can be done with various classification models including XResNet-50, ExDark19, CystoNet, CNN, ANN. Using the right model and having a high accuracy value can help radiologists to accurately detect kidney stones.

Today, climate change, an increase in anthropogenic factors, and changes in the natural environment have an adverse effect on insect diversity due to the changing climes around the world. There has been an increase in the number of pests of agricultural crops over the past few years because of the expansion of the cultivated areas in arid regions, including the number of insects of the Order Orthoptera. The formation of fauna in different regions of the globe needs to be identified in order to improve the methods of combating them, and therefore, it is necessary to identify their formation. A great deal of research on the class of insects has been conducted over the last 35 years, and most of those articles are published in English. However, the research work on Insecta: Orthoptera was carried out in different topics and ways during those 35 years. The scope of this article is to cover all articles that have been published about orthoptera between 1986 and 2021 in the Scopus database. Various categories were analyzed in order to determine the quality of this research, including the year of research, who was responsible for the research, and which of the major research institutes did the research. In the light of the analysis, it is possible to have a certain understanding of the current research problems that are being experienced in this area as a result of the analysis.

In past few years, as indirect convection cooling equipment, heat pipes have grown in favour for a variety of uses, including heat recovery and electronics. A sensible heat is categorized as not having a filter arrangement as a “pulsating heat pipe”. It transfers heat from its evaporator to condenser portions by moving the circulating flow back and forth a reaction of its ongoing phase shift that occurs inside of it. It is difficult to truly understand how it operates since the two-phase flow is the result of combining physical and thermodynamic factors. Despite this, the PHPs have caught the interest of researchers all over the world because of its simple design and large several scenarios necessitating an elevated heat transfer rate. Presented here begins and a preface outlining several researchers’ trying to model experimental explain how PHPs work. A short tabular review of the most recent experimental investigations on PHPs is offered. Novel ideas have been explored, including the use of Nano-fluids to improve PHP performance.

The experimental investigation of the performance of hydrophobic-treated recycled paper mill sludge (RPMS) incorporated into asphalt mixtures is presented in this paper. This research implements RPMS as a solid waste additive to partially replace the mineral filler in the asphalt mixture while practicing green asphalt technology. The raw RPMS required mechanical pre-treatments and its hydrophilic property was modified chemically. The hydrophobicity was assessed by Hydrophilic Coefficient, Water Contact Angle (WCA) and Scanning Electron Microscopy (SEM). The ethanol method, which involved the esterification of ethyl esters that utilized 7ml of waste cooking oil (WCO) and 50ml of ethanol, was adopted. In the Marshall mix design, RPMS was incorporated at 0.5% and 1.0% of the weight of aggregates. Conventional 60/70 PEN bitumen and granite aggregates were used. The optimum binder content (OBC) was evaluated and justified by its adsorption strength. The mechanical properties of asphalt mixtures were determined and compared with the Public Work Department (PWD) specifications. All the volumetric properties satisfied the standard specification by PWD for 0.5% modified RPMS asphalt mixture, and thus it is preferable as it also involved lower binder cost due to the lower OBC achieved.

Sustainability aims at a sound synergy of the economic, ecological and social dimension. To promote sustainable development and guarantee a high living-standard for future generations, all three elements must be balanced. The economy impacts the other two dimensions along the value chain. Particularly critical is the impact of the supply chain as human working conditions and environmental standards must be secured for procurement of materials along complex transportation routes. To tackle this issue, France has passed a Supply Chain Law (Loi de vigilance) in 2017, Britain has passed the Modern Slavery Act which prohibits child labor in 2015 and Germany has passed a Supply Chain Act (Lieferkettengesetz) in June 2021. Furthermore, a EU-wide supply chain law on due diligence and environmental standards for supply chains is expected for 2022. A transparent digitalized version of a company´s supply chain, including its human resources and environmental impact, would facilitate the identification of several sustainability intervention points. Such transparency could lead to not only better and supply chain law-compliant regulations for fairer working conditions and improved social sustainability, but also to optimized circular economy processes. However, there is also the risk that a high level oftransparency in complex supply chains entails very high bureaucratic efforts. With this conceptual outline, we would like to contribute to the discussion of the new German legislation and present a variety of IT solutions to improve and monitor the sustainability of supply chains as well as to reduce the bureaucratic effort which comes with supply chain supervision.

Context: Virtual reality is used in many courses and in multiple ways in medical pedagogy, but not in critical appraisal learning. Aim: To evaluate the usability and interest of virtual reality in this reflective teaching context. Methods: Sixteen third year of physiotherapy students' at the University of Limoges were taught critical appraisal of an article with virtual reality. Questionnaires asked them about their feelings, side effects (VRSQ), usability of the system (SUS) and user experience (AttrackDiff 2). A critical appraisal worksheet was completed by the students after reading a scientific article, and then completed after the virtual reality session, giving two formative scores. The students' learning path in the virtual experience was analyzed. Results: Learners scored significantly higher after viewing the virtual reality module (13.1 ± 3.0 and 14.3 ± 3.1 respectively, p < 0.05). Students described the tool as motivating, allowing them to focus and facilitating better understanding of a scientific study. Usability and attractiveness of the virtual reality module was satisfactory, despite the presence of some adverse effects. Conclusion: Virtual reality seems to be an interesting tool to use in the context of critical appraisal learning, and it can be deployed at distance in e-learning. [ABSTRACT FROM AUTHOR]

Integrated processing of plant raw materials refers to the primary areas of use of natural resources and their rotection. During the primary processing of bast plants, a large amount of waste remains – a shives. Part of the shives is burned, the rest goes into the dump. Due to its chemical composition, high content of cellulose shives can be used in the production of eco-friendly packaging. Packaging can be obtained with the complete or partial replacement of waste paper in its composition. Thanks to this, the issue of the shortage of waste paper at the enterprises of recycling of secondary raw materials will also be resolved. The purpose of the work is the production of eco-friendly biodegradable packaging from flax shives in industrial conditions. The paper presents the results of samples of lumpy egg packaging obtained by vacuum casting with the use of flax production waste. In industrial conditions, it was possible to replace part of the waste paper on the fire. For more efficient use, the shives was pre-ground to the consistency of wood flour M-560. The following indicators were determined: humidity, strength, moisture absorption capacity, antibacterial properties. The obtained results showed the optimal ratio of the mixture components, processing modes. According to all indicators, the packaging with a bone is not inferior, and in the case of tensile strength and antibacterial properties exceeds the normalized values.

Copyright of Revue Française de Géotechnique is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revue Française de Géotechnique is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Cahiers Agriculture is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revue Française de Géotechnique is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natures Sciences Sociétés is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Cahiers Agriculture is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natures Sciences Sociétés is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natures Sciences Sociétés is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natures Sciences Sociétés is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natures Sciences Sociétés is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)