Search

DNA- and RNA-based diagnostics play a pivotal role in accurately detecting and characterizing health-relevant bacteria, offering insights into bacterial presence, viability and treatment efficacy. Herein, we present the development of a novel extraction protocol for both DNA and RNA, designed to enable simple and rapid molecular diagnostics. The extraction method is based on the hydrophilic ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate and silica-coated magnetic beads. First, we developed an IL-based cell lysis protocol for bacteria that operates at room temperature. Subsequently, we established a magnetic bead purification procedure to efficiently and reproducibly extract DNA and RNA from the IL-lysates. The IL not only lyses the cells, but also facilitates the adsorption of nucleic acids (NAs) onto the surface of the magnetic beads, eliminating the need for a chaotropic binding buffer and allowing for purification of NAs without significant effort and materials required. Lastly, we combined the cell lysis step and the purification step and evaluated the novel IL-based extraction method on periopathogenic bacterial cultures, comparing it to commercial DNA and RNA extraction kits via (RT)-qPCR. In comparison to the reference methods, the IL-based extraction protocol yielded similar or superior results. Furthermore, costs are lower, required materials and equipment are minimal and the process is fast (30 min), simple and automatable. These characteristics favour the developed method for use in routine and high-throughput testing as well as in point-of-care, on-site and low-resource settings, thereby advancing the field of molecular diagnostics. [ABSTRACT FROM AUTHOR]

High-quality RNA is crucial in clinical diagnostics and precision medicine. Formalin-fixed and paraffin-embedded (FFPE) tissues pose a challenge due to nucleic acid fragmentation and crosslinking. In this pilot study, various commercially available techniques for extracting RNA from small FFPE samples were compared. We evaluated the KingFisher Duo automated system or the manual MagMAX FFPE DNA/RNA Ultra Kit as an RNA extraction method combined with either a xylene, d-limonene, or AutoLys M tubes deparaffinization method. Additionally, the automated Maxwell RSC RNA FFPE kit and the High Pure FFPET RNA Isolation Kit were examined using FFPE samples from inflammatory bowel disease (IBD) patients, as well as samples from ovarian, kidney, and breast cancer and the skin. The KingFisher Duo system gave a higher yield and more consistent RNA quantities, especially from small volumes of IBD samples, compared to manual extraction. The deparaffinization method also impacted results, with AutoLys M tubes proving effective in combination with the KingFisher Duo system. Conversely, the High Pure kit exhibited higher yields for larger FFPE samples. While RNA integrity is a critical factor, particularly for messenger RNA (mRNA) expression studies, its role is less prominent in microRNA (miRNA) analyses. Recognizing this, our study focused on RNA yield and purity (A260/A230) to evaluate RNA extraction methods for various sample types. These findings emphasize the importance of selecting appropriate RNA extraction methods based on sample characteristics and research goals, highlighting the performance of automated methods and the impact of deparaffinization choices. The findings contribute to refining RNA extraction for molecular biology analyses, suggesting avenues for further exploration, including cost-effectiveness under specific experimental conditions. [ABSTRACT FROM AUTHOR]

Premise: The extraction of high‐quality RNA is the critical first step for the analysis of gene expression and gene space. This remains particularly challenging in plants, and especially in ferns, where the disruption of the cell wall and separation of organic compounds from nucleic acids is not trivial. Methods: We developed a cetyltrimethylammonium bromide (CTAB)‐based RNA extraction protocol that consistently performs well across a large phylogenetic breadth of ferns—a lineage of plants high in secondary compounds—and in an array of tissue types. Two alternative options (precipitation vs. clean‐up without intermediate precipitation) are presented, both of which yield high‐quality RNA extracts with optical density (OD) ratios of OD 260/280 = 1.9–2.1 and OD 260/230 > 1.6, and RNA integrity numbers >7. Conclusions: This study presents an efficient protocol for the extraction of high‐quality RNA from multiple tissues and across the fern phylogeny, a clade of plants that still lags behind other major lineages in the development of genomic resources. We hope that this method can be used to help facilitate the closing of this gap. [ABSTRACT FROM AUTHOR]

Gene expression studies are widely used in medical, biological, and pharmaceutical research. Obtaining high-quality RNA from tissues is a prerequisite for high-quality data that should accurately represent gene expression levels in-vivo. The main source of technical bias, which could affect the results from transcriptomic studies, is variation in RNA quality. In this regard, tissue preparation is critical: different disruption techniques can affect RNA quality, influencing further applications. Mechanical disaggregation is a common, inexpensive, and simple method to obtain a high cell yield, demonstrated to efficiently disrupt the extracellular matrix and release single cells. However, its efficacy is operator-dependent, leading to poorly reproducible results. A fast, reproducible, and standardized technique could undoubtedly overcome this problem, avoiding wasting time and resources. In this study, our goal was to evaluate the impact of two mechanical tissue disruption techniques on the purity and quality of RNA extracted from fresh lung biopsies. The samples were processed in parallel using manual mechanical disaggregation or an automated mechanical device. The results showed that samples processed with the automated device had a higher integrity compared to those processed manually with a median Fragmentation Index of 0.86 and 0.71 respectively. This difference is statistically significant (p = 0.0084). Overall, our results indicated that the use of automatic mechanical disaggregation could undoubtedly help to overcome the technical biases related to fresh tissues processing. [ABSTRACT FROM AUTHOR]

Introduction: High‐quality nucleic acids are the basis for molecular biology experiments. Traditional RNA extraction methods are not suitable for Eleutherococcus senticosus Maxim. Objective: To find a suitable method to improve the quality of RNA extracted, we modified the RNA extraction methods of Trizol. Methodology: Based on the conventional Trizol method, the modified Trizol method 1 and modified Trizol method 2 were used as the control for extraction of RNA from E. senticosus Maxim leaves. The modified Trizol method 1 added β‐mercaptoethanol on the conventional Trizol method. After RNA was dissolved, a mixed solution of phenol, chloroform, and isoamyl alcohol was added to denature protein and inhibit the degradation of RNA. The modified Trizol method 2 adds PVPP to grind on the basis of modified Trizol method 1, so as to better remove phenols from leaves, and eliminates the step of incubation at −20°C to reduce extraction time and RNA degradation. Chloroform, CTAB, and CH3COONa were used instead of a phenol, chloroform, and isoamyl alcohol mixed solution to ensure complete separation of nucleic acid from plant tissues and to obtain high‐purity RNA. Results: The research results showed that the quality of RNA extracted by conventional Trizol method, modified Trizol method 1, was incomplete, accompanied with different degrees of contamination of polysaccharides, polyphenols, and DNA. The modified Trizol method 2 could better extract RNA from E. senticosus Maxim leaves. The ratio of A260/A280 was in the range of 1.8–2.0, and the yield of RNA was the highest, which was 1.68 and 1.15 times compared with that by conventional Trizol method and modified Trizol method 1 extraction, respectively. The reverse transcription cDNA was further tested through PCR with the specific primers. The amplified fragments are displayed in clear and bright bands in accordance with the expected size. Conclusion: The modified Trizol method 2 could better extract RNA from E. senticosus Maxim leaves. High‐quality RNA has more advantages in molecular biology study of E. senticosus Maxim. The conventional Trizol method was modified by adding PVPP for grinding, as well as using Chloroform, CTAB, and CH3COONa instead of a phenol, chloroform, and isoamyl alcohol mixed solution. The present investigation assesses and enhances the methods employed for extracting RNA from E. senticosus. The modified Trizol method 2, which has facilitated the successful isolation of premium RNA from E. senticosus leaves, stands as a convenient and cost‐effective extraction protocol and can promote research in plant molecular biology. [ABSTRACT FROM AUTHOR]

Since early 2024, a multistate outbreak of highly pathogenic avian influenza H5N1 has been affecting dairy cattle in the USA. The influenza viral RNA concentrations in milk make it an ideal matrix for surveillance purposes. However, viral RNA detection in multi-component fluids such as milk can be complex, and optimization of influenza detection methods is thus required. Raw bulk tank milk and mastitis milk samples were artificially contaminated with an avian influenza strain and subjected to five extraction methods. HCoV-229E and synthetic RNA were included as exogenous internal process controls. Given the high viral load usually observed in individual raw milk samples, four out of five tested methods would enable influenza detection in milk with normal texture, over a time window of at least 2 weeks post-onset of clinical signs. Nevertheless, sample dilution 1:3 in molecular transport medium prior to RNA extraction provided the best results for dilution of inhibitory substances and a good recovery rate of influenza RNA, that reached 12.5 ± 1.2% and 10.4 ± 3.8% in two independent experiments in bulk milk and 11.2 ± 3.6% and 10.0 ± 2.9% on two cohorts of mastitis milk samples. We have also shown compatibility of an influenza RT-qPCR system with synthetic RNA detection for simultaneous validation of the RNA extraction and RT-qPCR processes. [ABSTRACT FROM AUTHOR]

Balamuthia mandrillaris is a free-living amoeba (FLA) that causes granulomatous amebic encephalitis (GAE) and skin lesions. Transcriptomic analysis is a powerful tool used to study B. mandrillaris pathogenic infections. However, preliminary tests of RNA extraction showed poor results, so it has become essential to standardize a protocol for high-quality RNA. The present study evaluated 11 RNA extraction protocols based on three commercial kits by making modifications to the temperature and centrifugation times, and by combining kits. Four protocols, namely Q3 (based on QIAGEN RNeasy Mini Kit, with modifications in temperature and centrifugation times), T1 (Invitrogen TRIzol Reagent), T2 (combination of TRIzol and QIAGEN modified protocols) and T3 (combination of TRIzol and PROMEGA SV Total RNA Isolation protocols), presented RNA with good integrity and purity, except for the T1 protocol, which obtained an A260/230 value below the acceptable threshold. High RNA integrity (RIN) values were obtained with the Q3 (9.8), T2 (9.2), and T3 (8.9) protocols, while the T1 protocol obtained a lower RIN value (7.1). The Q3, T2, and T3 protocols obtained high-quality RNA from B. mandrillaris based on the criteria of integrity, purity, and concentration, where the implemented modifications and combinations raised the quality; thus, their use is recommended to obtain accurate results when performing transcriptomic analysis.

Background: Senecavirus A (SV-A) is an RNA virus that belongs to the genus Senecavirus within the family Picornaviridae. This study aimed to analyze factors that can influence the molecular diagnosis of Senecavirus A, such as oligonucleotides, RNA extraction methods, and RT-qPCR kits. Methods: Samples from suspected cases of vesicular disease in Brazilian pigs were analyzed for foot-and-mouth disease, swine vesicular disease, and vesicular stomatitis. All tested negative for these diseases but positive for SV-A. RT-qPCR tests were used, comparing different reagent kits and RNA extraction methods. Sensitivity and repeatability were evaluated, demonstrating efficacy in detecting SV-A in clinical samples. Results: In RNA extraction, significant reduction in Cq values was observed with initial dilutions, particularly with larger supernatant volumes. Trizol and Maxwell showed greater sensitivity in automated equipment protocols, though results varied in tissue tests. RT-qPCR kit comparison revealed differences in amplification using viral RNA but minimal differences with plasmid DNA. Sensitivity among methods was comparable, with slight variations in non-amplified samples. Repeatability tests showed consistent results among RT-qPCRs, demonstrating similarity between methods despite minor discrepancies in Cq values. Conclusions: Trizol, silica columns, and semi-automated extraction were compared, as well as different RT-qPCR kits. The study found significant variations that could impact the final diagnosis. [ABSTRACT FROM AUTHOR]

Chikungunya virus (Togaviridae, Alphavirus; CHIKV) is a mosquito-borne global health threat. The main urban vector of CHIKV is the Aedes aegypti mosquito, which is found throughout Brazil. Therefore, it is important to carry out laboratory tests to assist in the virus's diagnosis and surveillance. Most molecular biology methodologies use nucleic acid extraction as the first step and require quality RNA for their execution. In this context, four RNA extraction protocols were evaluated in Ae. aegypti experimentally infected with CHIKV. Six pools were tested in triplicates (n = 18), each containing 1, 5, 10, 20, 30, or 40 mosquitoes per pool (72 tests). Four commercial kits were compared: QIAamp®, Maxwell®, PureLink®, and PureLink® with TRIzol®. The QIAamp® and PureLink® with TRIzol® kits had greater sensitivity. Two negative correlations were observed: as the number of mosquitoes per pool increases, the Ct value decreases, with a higher viral load. Significant differences were found when comparing the purity and concentration of RNA. The QIAamp® protocol performed better when it came to lower Ct values and higher RNA purity and concentration. These results may provide help in CHIKV entomovirological surveillance planning. [ABSTRACT FROM AUTHOR]

Balamuthia mandrillaris is a free-living amoeba (FLA) that causes granulomatous amebic encephalitis (GAE) and skin lesions. Transcriptomic analysis is a powerful tool used to study B. mandrillaris pathogenic infections. However, preliminary tests of RNA extraction showed poor results, so it has become essential to standardize a protocol for high-quality RNA. The present study evaluated 11 RNA extraction protocols based on three commercial kits by making modifications to the temperature and centrifugation times, and by combining kits. Four protocols, namely Q3 (based on QIAGEN RNeasy Mini Kit, with modifications in temperature and centrifugation times), T1 (Invitrogen TRIzol Reagent), T2 (combination of TRIzol and QIAGEN modified protocols) and T3 (combination of TRIzol and PROMEGA SV Total RNA Isolation protocols), presented RNA with good integrity and purity, except for the T1 protocol, which obtained an A260/230 value below the acceptable threshold. High RNA integrity (RIN) values were obtained with the Q3 (9.8), T2 (9.2), and T3 (8.9) protocols, while the T1 protocol obtained a lower RIN value (7.1). The Q3, T2, and T3 protocols obtained high-quality RNA from B. mandrillaris based on the criteria of integrity, purity, and concentration, where the implemented modifications and combinations raised the quality; thus, their use is recommended to obtain accurate results when performing transcriptomic analysis. [ABSTRACT FROM AUTHOR]

turboLysis is a novel mechanical cell lysis device that utilizes small beads to efficiently lyse tough cells like Mycobacterium, Saccharomyces, and Arabidopsis. We compared turboLysis to bead beating using the BeadBug 6 for several concentrations of Mycobacterium tuberculosis roughly correlated to the bacterial load commonly seen in patient samples. turboLysis performed similarly to the BeadBug at low bacterial concentrations and outperformed it at high concentrations above 2x105 CFU/ml (p

Abstract Background High-quality RNA extraction from woody plants is difficult because of the presence of polysaccharides and polyphenolics that bind or co-precipitate with the RNA. The CTAB (cetyl trimethylammonium bromide) based method is widely used for the isolation of nucleic acids from polysaccharide-rich plants. Despite the widespread use of the CTAB method, it is necessary to adapt it to particular plant species, tissues and organs. Here we described a simple and generalized method for RNA isolation from mature leaf tissues of several economically important woody (17) and herbaceous plants (2) rich in secondary metabolites. High yields were achieved from small amount (up to 50 mg) of plant material. Two main modifications were applied to the basic protocol: an increase in β-mercaptoethanol concentration (to 10%v/v) and the use of an effective DNase treatment. As opposed to similar studies, we tried to describe a more detailed protocol for isolating RNA, including the exact quantity and concentration of the reagents were used. Results Our modified CTAB method is proved to be efficient in extracting the total RNA from a broad range of woody and herbaceous species. The RNA yield was ranged from 2.37 to 91.33 µg/µl. The A260:A280 and A260:A230 absorbance ratios were measured from 1.77 to 2.13 and from 1.81 to 2.22. The RIN value (RNA Integrity Number) of the samples fell between 7.1 and 8.1, which indicated that a small degree of RNA degradation occurred during extraction. The presence of a single peak in the melt curve analyses and low standard errors of the Ct values of replicated measurements indicated the specificity of the primers to bind to the cDNA. Conclusions Our RNA isolation method, with fine-tuned and detailed instructions, can produce high quality RNA from a small amount of starting plant material that is suitable for use in downstream transcriptional analyses. The use of an increased concentration of the reducing agent β-mercaptoethanol in the extraction buffer, as well as the application of DNaseI-treatment resulted in a method suitable for a wide range of plants without the need of further optimalization, especially in Rhus typhina (Staghorn sumac), for which molecular-genetic studies have not yet been sufficiently explored.

Abstract Background Blood transcriptomic analysis is widely used to provide a detailed picture of a physiological state with potential outcomes for applications in diagnostics and monitoring of the immune response to vaccines. However, multi-species transcriptomic analysis is still a challenge from a technological point of view and a standardized workflow is urgently needed to allow interspecies comparisons. Results Here, we propose a single and complete total RNA-Seq workflow to generate reliable transcriptomic data from blood samples from humans and from animals typically used in preclinical models. Blood samples from a maximum of six individuals and four different species (rabbit, non-human primate, mouse and human) were extracted and sequenced in triplicates. The workflow was evaluated using different wet-lab and dry-lab criteria, including RNA quality and quantity, the library molarity, the number of raw sequencing reads, the Phred-score quality, the GC content, the performance of ribosomal-RNA and globin depletion, the presence of residual DNA, the strandness, the percentage of coding genes, the number of genes expressed, and the presence of saturation plateau in rarefaction curves. We identified key criteria and their associated thresholds to be achieved for validating the transcriptomic workflow. In this study, we also generated an automated analysis of the transcriptomic data that streamlines the validation of the dataset generated. Conclusions Our study has developed an end-to-end workflow that should improve the standardization and the inter-species comparison in blood transcriptomics studies. In the context of vaccines and drug development, RNA sequencing data from preclinical models can be directly compared with clinical data and used to identify potential biomarkers of value to monitor safety and efficacy.

High-quality RNA is crucial in clinical diagnostics and precision medicine. Formalin-fixed and paraffin-embedded (FFPE) tissues pose a challenge due to nucleic acid fragmentation and crosslinking. In this pilot study, various commercially available techniques for extracting RNA from small FFPE samples were compared. We evaluated the KingFisher Duo automated system or the manual MagMAX FFPE DNA/RNA Ultra Kit as an RNA extraction method combined with either a xylene, d-limonene, or AutoLys M tubes deparaffinization method. Additionally, the automated Maxwell RSC RNA FFPE kit and the High Pure FFPET RNA Isolation Kit were examined using FFPE samples from inflammatory bowel disease (IBD) patients, as well as samples from ovarian, kidney, and breast cancer and the skin. The KingFisher Duo system gave a higher yield and more consistent RNA quantities, especially from small volumes of IBD samples, compared to manual extraction. The deparaffinization method also impacted results, with AutoLys M tubes proving effective in combination with the KingFisher Duo system. Conversely, the High Pure kit exhibited higher yields for larger FFPE samples. While RNA integrity is a critical factor, particularly for messenger RNA (mRNA) expression studies, its role is less prominent in microRNA (miRNA) analyses. Recognizing this, our study focused on RNA yield and purity (A260/A230) to evaluate RNA extraction methods for various sample types. These findings emphasize the importance of selecting appropriate RNA extraction methods based on sample characteristics and research goals, highlighting the performance of automated methods and the impact of deparaffinization choices. The findings contribute to refining RNA extraction for molecular biology analyses, suggesting avenues for further exploration, including cost-effectiveness under specific experimental conditions.

Peripheral blood is the most practical tissue for human immune system gene expression profiling because it is easily accessible, whereas the site of primary infection in certain diseases may not be easily accessible. Due to the ex vivo instability of RNA transcripts, a key challenge in the gene expression analysis of blood samples is the rapid sample handling and stabilization of the mRNA by adding an RNA preservative (PAXgeneTM Blood RNA Tubes, TempusTM Blood RNA tubes, RNAlater Stabilization Reagent, RNAgard® Blood Tubes). BioMole (Turin, Italy) has developed a novel blood stabilizer, called RNApro, in which RNA is stabilized during phlebotomy and sample storage. In this study, RNApro performance intended as RNA yield, integrity, and stability was evaluated. Our results show that blood samples stored at −80 °C and re-extracted after 7 years show no differences in terms of quantity, quality, and amplificability. The samples in the RNAlater stabilization solution can be stored at room temperature for up to one week or at 4 °C for up to one month. Similar results can also be observed for PAXgene tubes, Tempus tubes, and RNAgard tubes. In agreement with these data, the RNApro stabilization solution preserves the RNA from degradation for up to 1 month at 4 °C and 1 week at room temperature. RNApro can be stored indifferently at −80, −20, 4 °C, or room temperature for up to 2 months after, and then could be stored at −80 °C for up to seven years. In summary, our study is the first to analyze the performance of an RNA stabilizer called RNApro. We can conclude that several studies have shown significant differences in gene expression analysis when the sample was preserved in different RNA stabilizers. Therefore, it is desirable to standardize the method of nucleic acid conservation when comparing data from transcriptomic analyses. [ABSTRACT FROM AUTHOR]

Human noroviruses (HuNoVs) are among the main causes of acute gastroenteritis worldwide. HuNoVs can survive for several days up to weeks at room temperature in the environment, on food, and on food handling and processing surfaces. As a result, this could lead to viral spread through the ingestion of food in contact with contaminated surfaces. The development of stable surface materials with antiviral activity might be useful to reduce viral outbreaks. Metal-based compounds, including photoactivated titanium nanoparticles (TiO2 NPs), are known for their antiviral activity. In this study, we tested the impact of 2000 µg/mL TiO2 NPs, with or without UV activation, on HuNoV GII and murine norovirus. Their recovery rates were reduced by 99.6%. We also evaluated a new TiO2 NP-coating process on a polystyrene surface. This process provided a homogenous coated surface with TiO2 NPs ranging between 5 nm and 15 nm. Without photoactivation, this TiO2 NP-coated polystyrene surface reduced the recovery rates of intact HuNoV GII by more than 94%. When a capsid integrity treatment with PtCl4 or a longer reverse transcription polymerase chain detection approach was used to evaluate virus integrity following contact with the TiO2 NP-coated polystyrene, the HuNoV GII recovery yield reduction varied between 97 and 100%. These results support the hypothesis that TiO2 NP-coated surfaces have the potential to prevent viral transmission associated with contaminated food surfaces. [ABSTRACT FROM AUTHOR]

Background: High-quality RNA extraction from woody plants is difficult because of the presence of polysaccharides and polyphenolics that bind or co-precipitate with the RNA. The CTAB (cetyl trimethylammonium bromide) based method is widely used for the isolation of nucleic acids from polysaccharide-rich plants. Despite the widespread use of the CTAB method, it is necessary to adapt it to particular plant species, tissues and organs. Here we described a simple and generalized method for RNA isolation from mature leaf tissues of several economically important woody (17) and herbaceous plants (2) rich in secondary metabolites. High yields were achieved from small amount (up to 50 mg) of plant material. Two main modifications were applied to the basic protocol: an increase in β-mercaptoethanol concentration (to 10%v/v) and the use of an effective DNase treatment. As opposed to similar studies, we tried to describe a more detailed protocol for isolating RNA, including the exact quantity and concentration of the reagents were used. Results: Our modified CTAB method is proved to be efficient in extracting the total RNA from a broad range of woody and herbaceous species. The RNA yield was ranged from 2.37 to 91.33 µg/µl. The A260:A280 and A260:A230 absorbance ratios were measured from 1.77 to 2.13 and from 1.81 to 2.22. The RIN value (RNA Integrity Number) of the samples fell between 7.1 and 8.1, which indicated that a small degree of RNA degradation occurred during extraction. The presence of a single peak in the melt curve analyses and low standard errors of the Ct values of replicated measurements indicated the specificity of the primers to bind to the cDNA. Conclusions: Our RNA isolation method, with fine-tuned and detailed instructions, can produce high quality RNA from a small amount of starting plant material that is suitable for use in downstream transcriptional analyses. The use of an increased concentration of the reducing agent β-mercaptoethanol in the extraction buffer, as well as the application of DNaseI-treatment resulted in a method suitable for a wide range of plants without the need of further optimalization, especially in Rhus typhina (Staghorn sumac), for which molecular-genetic studies have not yet been sufficiently explored. [ABSTRACT FROM AUTHOR]

RNA extraction from formalin‐fixed paraffin‐embedded tissues (FFPE) presents a notable challenge. Extracting RNA from FFPE tissues has been challenging due to RNA degradation and chemical bonding between RNA and proteins during the fixation process. This results in reduced concentration and quality of the extracted RNA from FFPE tissues, impacting subsequent downstream analyses. In this study, we present an optimized approach involves replacing the tissue temperature‐digestion step with tissue crushing and homogenization. RNA extraction was performed on 100 FFPE tissue blocks obtained from the archive of Pathology Department of Shiraz University of Medical Sciences. After deparafinization of the tissues, RNA was extracted using this modified method, and the results compared to those of a standard extraction procedure and commercial kits used for FFPE tissue. Then gel electrophoresis and Real time PCR were done to check the quality and integrity of the extracted RNA. The results show that the concentration of RNA obtained from this method was significantly (P value <0.0001) higher than the other methods. In conclusion, we have successfully introduced a modified method that enables the extraction of high‐quality and intact RNA from FFPE tissue. This method stands as a reliable option for molecular biology studies necessitating precise RNA extraction. [ABSTRACT FROM AUTHOR]

In 2020, there were numerous cases in Kazakhstan with clinical symptoms of COVID-19 but negative PCR results in nasopharyngeal and oropharyngeal swabs. The diagnosis was confirmed clinically and by CT scans (computed tomography). The problem with such negative PCR results for SARS-CoV-2 infection confirmation still exists and indicates the need to confirm the diagnosis in the bronchoalveolar lavage in such cases. There is also a lack of information about confirmation of SARS-CoV-2 infection in deceased patients. In this study, various tissue materials, including lungs, bronchi, and trachea, were examined from eight patients who died, presumably from SARS-CoV-2 infection, between 2020 and 2022. Naso/oropharyngeal swabs taken from these patients in hospitals tested PCR negative for SARS-CoV-2. This study presents a modified RNA isolation method based on a comparison of the most used methods for RNA isolation in laboratories: QIAamp Viral RNA Mini Kit and TRIzol-based method. This modified nucleic acid extraction protocol can be used to confirm SARS-CoV-2 infection by RT-qPCR in the tissues of deceased patients in disputed cases. RT-qPCR with RNA of SARS-CoV-2 re-extracted with such method from post-mortem tissues that were stored at -80 °C for more than 32 months still demonstrated high-yielding positive results. [ABSTRACT FROM AUTHOR]

Background: Blood transcriptomic analysis is widely used to provide a detailed picture of a physiological state with potential outcomes for applications in diagnostics and monitoring of the immune response to vaccines. However, multi-species transcriptomic analysis is still a challenge from a technological point of view and a standardized workflow is urgently needed to allow interspecies comparisons. Results: Here, we propose a single and complete total RNA-Seq workflow to generate reliable transcriptomic data from blood samples from humans and from animals typically used in preclinical models. Blood samples from a maximum of six individuals and four different species (rabbit, non-human primate, mouse and human) were extracted and sequenced in triplicates. The workflow was evaluated using different wet-lab and dry-lab criteria, including RNA quality and quantity, the library molarity, the number of raw sequencing reads, the Phred-score quality, the GC content, the performance of ribosomal-RNA and globin depletion, the presence of residual DNA, the strandness, the percentage of coding genes, the number of genes expressed, and the presence of saturation plateau in rarefaction curves. We identified key criteria and their associated thresholds to be achieved for validating the transcriptomic workflow. In this study, we also generated an automated analysis of the transcriptomic data that streamlines the validation of the dataset generated. Conclusions: Our study has developed an end-to-end workflow that should improve the standardization and the inter-species comparison in blood transcriptomics studies. In the context of vaccines and drug development, RNA sequencing data from preclinical models can be directly compared with clinical data and used to identify potential biomarkers of value to monitor safety and efficacy. [ABSTRACT FROM AUTHOR]

A comprehensive gene expression investigation requires high-quality RNA extraction, in sufficient amounts for real-time quantitative polymerase chain reaction and next-generation sequencing. In this work, we compared different RNA extraction methods and evaluated different reference genes for gene expression studies in the fetal human inner ear. We compared the RNA extracted from formalin-fixed paraffin-embedded tissue with fresh tissue stored at −80 °C in RNAlater solution and validated the expression stability of 12 reference genes (from gestational week 11 to 19). The RNA from fresh tissue in RNAlater resulted in higher amounts and a better quality of RNA than that from the paraffin-embedded tissue. The reference gene evaluation exhibited four stably expressed reference genes (B2M, HPRT1, GAPDH and GUSB). The selected reference genes were then used to examine the effect on the expression outcome of target genes (OTOF and TECTA), which are known to be regulated during inner ear development. The selected reference genes displayed no differences in the expression profile of OTOF and TECTA, which was confirmed by immunostaining. The results underline the importance of the choice of the RNA extraction method and reference genes used in gene expression studies. [ABSTRACT FROM AUTHOR]

Background and Aims Transcriptome sequencing is a cost-effective approach that allows researchers to study a broad range of questions. However, to preserve RNA for transcriptome sequencing, tissue is often kept in special conditions, such as immediate ultracold freezing. Here, we demonstrate that RNA can be obtained from 6-month-old, field-collected samples stored in silica gel at room temperature. Using these transcriptomes, we explore the evolutionary relationships of the genus Pitcairnia (Bromeliaceae) in the Dominican Republic and infer barriers to gene flow. Methods We extracted RNA from silica-dried leaf tissue from 19 Pitcairnia individuals collected across the Dominican Republic. We used a series of macro- and micro-evolutionary approaches to examine the relationships and patterns of gene flow among individuals. Key Results We produced high-quality transcriptomes from silica-dried material and demonstrated that evolutionary relationships on the island match geography more closely than species delimitation methods. A population genetic examination indicates that a combination of ecological and geographical features presents barriers to gene flow in Pitcairnia. Conclusions Transcriptomes can be obtained from silica-preserved tissue. The genetic diversity among Pitcairnia populations does not warrant classification as separate species, but the Dominican Republic contains several barriers to gene flow, notably the Cordillera Central mountain range. [ABSTRACT FROM AUTHOR]

Introduction: Human saliva was used to develop non-invasive liquid biopsy biomarkers to establish saliva as an alternate to blood and plasma in translational research. The present study focused on understanding the impact of sample storage conditions on the extraction of RNA from saliva and the RNA yield, to be applied in clinical diagnosis. In this study, genes related to asthma were used to test the method developed.Methods: Salivary RNA was extracted from three subjects using the Qiazol® based method and quantified by both spectrophotometric (NanoDrop) and fluorometric (Qubit®) methods. RNA integrity was measured using a bioanalyzer. Quantitative PCR was used to monitor the impact of storage conditions on the expression of housekeeping genes: GAPDH and β-actin, and the asthma related genes: POSTN and FBN2. In addition, an independent cohort of 38 asthmatics and 10 healthy controls were used to validate the expression of POSTN and FBN2 as mRNA salivary biomarkers.Results: Approximately 2 µg of total RNA was obtained from the saliva stored at 40°C without any preservative for 2 weeks showing consistent gene expression with RNA stored at room temperature (RT) for 48 h with RNAlater. Although saliva stored with RNAlater showed a substantial increase in the yield (110 to 234 ng/μL), a similar Cq (15.6 ± 1.4) for the 18s rRNA gene from saliva without preservative showed that the RNA was stable enough. Gene expression analysis from the degraded RNA can be performed by designing the assay using a smaller fragment size spanning a single exon as described below in the case of the POSTN and FBN2 genes in the asthma cohort.Conclusion: This study showed that samples stored at room temperature up to a temperature of 40°C without any preservative for 2 weeks yielded relatively stable RNA. The methodology developed can be employed to transport samples from the point of collection to the laboratory, under non-stringent storage conditions enabling the execution of gene expression studies in a cost effective and efficient manner.

Since the end of 2019, COVID-19 pandemic caused by the novel SARS-CoV-2 has become a serious problem for the world. Accurate and rapid techniques in testing and tracing are needed to control the virus spreading. Molecular diagnostics through gene amplification techniques, especially PCR, still become the gold standard for SARS-CoV-2 detection, which requires the first step of RNA extraction and purification. The limitations of commercial RNA extraction-purification kits during the pandemic caused a big problem in testing and tracing, especially for developing countries. A simple RNA extraction-purification kit based on magnetic-silica (MAGSi) beads and non-guanidine in-house buffers for RNA virus extraction-purification has been developed. Two types of MAGSi beads with different magnetic nanoparticles (MNPs) content were synthesized through a modified Stöber’s method using the sonication technique. The PCR result shows that both the MAGSi beads and the buffer can be used as a kit for RNA extraction-purification, tested for SARS-CoV-2 and Canine Distemper Virus. Further study shows that MAGSi-1 has better RNA extraction ability, and a higher concentration of RNA has been extracted. This is likely because of the smaller particle size distribution (50–1,500 nm distribution) and higher magnetization (20.2 emu/g) of MAGSi-1 compared to MAGSi-2 with 100–1,700 nm size distribution and 14.2 emu/g magnetization.

Characterizing metabolically active microorganisms using RNA-based methods is a crucial tool for monitoring and mitigating operational issues, such as oil biodegradation and biocorrosion of pipelines in the oil and gas industry. Our review, a pioneering study, addresses the main methods used to preserve, isolate, and sequence RNA from oilfield samples and describes the most abundant metabolically active genera studied. Using the MEDLINE/PubMed, PubMed Central, Scopus, and Web of Science databases, 2.561 potentially eligible records were identified. After screening, 20 studies were included in our review, underscoring the scarcity of studies related to the subject. Data were extracted and reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). These studies evaluated different samples, including produced water (PW), injection water (IW), solid deposits (SD), oil (OIL), and oily sludge (OS) collected from oilfields located in Australia, China, India, Mexico, and the United Arab Emirates. Environmental samples accounted for 55% of the studies, while enriched cultures and microbial consortia represented 35% and 15% of studies, respectively. PW was the most frequently studied sample, comprising 72% of all samples. Filtration and centrifugation were the only processes employed to concentrate the biomass present in samples. For RNA preservation, the most used method was a solution composed of 95:5 v/v ethanol/TRIzol, while for RNA isolation, the TRIzol reagent was the most cited. The Sanger sequencing method was used in all studies evaluating functional genes (alkB, dsrA, aprA, assA, and mcrA), and the Next-Generation Sequencing (NGS) method was employed in studies for sequencing transcripts of the 16S rRNA gene and metatranscriptomes. Pseudomonas (16S rRNA = PW: 2%; IW: 8%; metatranscriptome = PW: 20%) and Acinetobacter (16S rRNA = PW: 1%; IW: 4%; metatranscriptome = PW: 17%) were the most abundant genera. This study outlined the primary methods employed in researching metabolically active microorganisms. These data provide a foundation for future research. However, it is essential to note that we cannot yet determine the most effective method. We hope that this study will inspire further research related to the standardization of RNA preservation, extraction, and sequencing methods and significantly contribute to our understanding of active microbial communities in oilfields. [ABSTRACT FROM AUTHOR]

Abstract Background High-purity RNA serves as the basic requirement for downstream molecular analysis of plant species, especially the differential expression of genes to various biotic and abiotic stimuli. But, the extraction of high-quality RNA is usually difficult from plants rich in polysaccharides and polyphenols, and their presence usually interferes with the downstream applications. The aim of the study is to optimize the extraction of high-quality RNA from diverse plant species/tissues useful for downstream molecular applications. Results Extraction of RNA using commercially available RNA extraction kits and routine hexadecyltrimethylammonium bromide (CTAB) methods did not yield good quality DNA-free RNA from Prosopis cineraria, Conocarpus erectus, and Phoenix dactylifera. A reliable protocol for the extraction of high-quality RNA from mature leaves of these difficult-to-extract trees was optimized after screening nine different methods. The DNase I-, and proteinase K treatment-free modified method, consisting of extraction with CTAB method followed by TRIzol, yielded high-quality DNA-free RNA with an A260/A280 and A260/A230 ratios > 2.0. Extraction of RNA from Conocarpus, the most difficult one, was successful by avoiding the heat incubation of ground tissue in a buffer at 65 oC. Pre-warming of the buffer for 5–10 min was sufficient to extract good-quality RNA. RNA integrity number of the extracted RNA samples ranged between 7 and 9.1, and the gel electrophoresis displayed intact bands of 28S and 18S RNA. A cDNA library constructed from the RNA of P. cineraria was used for the downstream applications. Real-time qPCR analysis using the cDNA from P. cineraria RNA confirmed the quality. The extraction of good quality RNA from samples of the desert-growing P. cineraria (> 20-years-old) collected in alternate months of the year 2021 (January to December covering winter, spring, autumn, and the very dry and hot summer) proved the efficacy of the protocol. The protocol’s broad applicability was further validated by extracting good-quality RNA from 36 difficult-to-extract plant species, including tissues such as roots, flowers, floral organs, fruits, and seeds. Conclusions The modified DNase I and Proteinase K treatment-free protocol enables to extract DNA-free, high-quality, intact RNA from a total of 39 difficult-to-extract plant species belonging to 32 angiosperm families is useful to extract good-quality RNA from dicots and monocots irrespective of tissue types and growing seasons.

Abstract RNA extraction from Mycobacterium tuberculosis has been a historically challenging task for researchers due to the thick lipids associated with the cell wall of this “notorious” pathogen that is responsible for Tuberculosis (TB) outbreaks. Several studies have successfully extracted RNA from M. tuberculosis using a Trizol reagent combined with organic solvents. Recently, our laboratory has successfully extracted high quality total RNA using a commercial kit from clinical strains belonging to F15/LAM4/KZN, Beijing and F11 strain families and H37Rv laboratory strain by exploiting high speed homogenizer for cell lysis and spin columns for RNA purification. The quality and integrity of the extracted RNA was analyzed and confirmed through the Nanodrop, Bioanalyzer and RNA 3-(N-morpholino) propanesulfonic acid (MOPS) gel electrophoresis. Furthermore, to confirm the integrity of small RNA (sRNA) molecules due to their vulnerability to degradation, the RNA samples were converted to cDNA and sRNAs were amplified and confirmed through PCR. This detailed RNA extraction protocol proposes to carve a new path into TB transcriptome research without the use of organic solvent for downstream purification steps while yielding high quality RNA that can be used to understand M. tuberculosis transcriptome regulation.

The golden-headed lion tamarin (Leontopithecus chrysomelas) is an endangered primate endemic to the Atlantic Forest. Conservation efforts for the species involve applying reproductive biotechniques to preserve genetic resources and ensure the management of populations in both ex situ and in situ conditions. This study aims to initiate investigations into seminal and molecular factors influencing the reproductive potential of sexually mature males. Semen was collected using the penile vibrostimulation technique, and seminal parameters were assessed in two groups: the 'Old' group (average age 11.6 years; n=6) and the 'Young' group (average age 4.8 years; n=6). ANOVA results indicated age-related influences on plasma membrane integrity (p=0.049), acrosomal integrity (p=0.009), and DAB IV (p=0.026) for both groups. Linear regression revealed significant correlations between seminal parameters and age (plasma membrane integrity (p=0.021), acrosomal integrity (p=0.05), and DAB III (p=0.024)), alongside animal weight (plasma membrane integrity (p=0.010), acrosomal integrity (p=0.009), DAB III (p=0.33), and DAB IV (p=0.066)). In an effort to advance reproductive techniques and sperm selection, a protocol utilizing a discontinuous Percoll gradient was employed. Despite its effectiveness in isolating gametes, there were no significant gains in the reevaluated parameters post-selection, necessitating adjustments in the methodology. While semen cryopreservation is common in wild species, challenges arise due to seminal coagulum in many neotropical primate ejaculates, hindering gamete use in reproductive procedures. Given the precious nature of and the considerable effort involved in collecting semen from these animals, it would be desirable to maximize the sample's utility. The liquid fraction could be applied in reproductive biotechniques, while the spermatozoa contained in the clot could be utilized as a non-invasive approach for molecular evaluation of these gametes. This study established a protocol for RNA extraction from sperm retained in the seminal coagulum, highlighting its genetic richness often discarded post-processing. In summary, our study emphasizes the importance of early cryopreservation of semen to safeguard the reproductive potential of L. chrysomelas. Additionally, we propose further exploration of RNA quantity in gametes as a non-invasive tool for inferring male fertility, given the pivotal role of sperm RNA transcripts in regulating the activation of the female gamete and gene expression during early embryo development.

Polymer-based lab-on-a-disc (LoaD) devices for isolating ribonucleic acid (RNA) from whole blood samples have gained considerable attention for accurate biomedical analysis and point-of-care diagnostics. However, the mass production of these devices remains challenging in manufacturing cost and sustainability, primarily due to the utilization of a laser cutter or router computer numerical control (CNC) machine for engraving and cutting plastics in the conventional prototyping process. Herein, we reported the first energy-efficient room-temperature printing-imprinting integrated roll-to-roll manufacturing platform for mass production of a polydimethylsiloxane (PDMS)-based LoaD to on-site isolate ribonucleic acid (RNA) from undiluted blood samples. We significantly reduced energy consumption and eliminated thermal expansion variations between the mold, substrate, and resists by accelerating the PDMS curing time to less than 10 min at room temperature without using heat or ultraviolet radiation. The additive manufacturing technology was applied to fabricate a multi-depth flexible polymer mold that integrated macro (2 mm) and micro-sized (500 μm) features, which overcomes the economic and environmental challenges of conventional molding techniques. Our integrated R2R platform was enabled to print adhesion-promoting films at the first printing unit and continuously in-line imprint with a high replication accuracy (99%) for high-volume manufacturing of a new centrifugal microfluidic chip with an enhancement of mixing performance by integrating an efficient mixing chamber and serpentine micromixer. This research paved the way for scalable green manufacturing of large-volume polymer-based microfluidic devices, often required in real-world sample-driven analytical systems for clinical bioanalysis.

Introduction: While genetic analysis of archived formalin-fixed paraffin embedded (FFPE) tissue specimens would be a significant research resource, extraction of high-quality DNA and RNA from these specimens is a significant challenge. Storage duration, tissue handling and tissue preservation processes as well as their interactions with the nucleic acids could influence the quality and integrity of the DNA or RNA required for genetic analysis. Objectives: The goal of this study was to establish a protocol to extract high quality DNA and RNA from the FFPE tissues for further use in quantitative PCR analysis. Methods: For the purposes of this study, human FFPE biopsy tissues from lung, liver, colon and kidney were obtained from a single center biorepository. GeneJET Genomic DNA Purification Kit (Catalog # K0722) obtained from Thermo Fisher Scientific and RecoverAll Total Nucleic Acid Isolation Kit obtained from Life Technologies were modified and used for extraction of DNA and RNA, respectively. Briefly, modifications involved extending reagent incubation times, increasing sample volumes and wash steps, and increased final nucleic acids recovery and concentration steps. Eight sections around 8-10 ?m thick were microtomed for each tissue sample and used for extraction. The purity of the nucleic acids obtained was verified using Nanodrop Spectrophotometer. Results: The average DNA yield from eight sections for each of the tissues was 270±184 ng/?l and for RNA was 296±188 ng/?l. Nucleic acid quality was assessed by measuring the 260nm/280nm absorbance ratio for protein contamination as well as the 260nm/230nm absorbance ratio for salt contamination. Both were found to be within acceptable ranges. RNA was reverse transcribed to cDNA and qPCR was successfully performed on both DNA and cDNA samples. Conclusions: These results indicate that protocols using the silica-based membrane technology can yield high quality DNA and RNA that can be successfully used for downstream genetic analysis.

RT-qPCR remains a key diagnostic methodology for COVID-19/SARS-CoV-2. Typically, nasal or saliva swabs from patients are placed in virus transport media (VTM), RNA is extracted at the pathology laboratory, and viral RNA is measured using RT-qPCR. In this study, we describe the use of TNA-Cifer Reagent E in a pre-clinical evaluation study to inactivate SARS-CoV-2 as well as prepare samples for RT-qPCR. Adding 1 part TNA-Cifer Reagent E to 5 parts medium containing SARS-CoV-2 for 10min at room temperature inactivated the virus and permitted RT-qPCR detection. TNA-Cifer Reagent E was compared with established column-based RNA extraction and purification methodology using a panel of human clinical nasal swab samples (n = 61), with TNA-Cifer Reagent E showing high specificity (100%) and sensitivity (97.37%). Mixtures of SARS-CoV-2 virus and TNA-Cifer Reagent E could be stored for 3 days at room temperature or for 2 weeks at 4 ℃ without the loss of RT-qPCR detection sensitivity. The detection sensitivity was preserved when TNA-Cifer Reagent E was used in conjunction with a range of VTMfor saliva samples but only PBS (Gibco) and Amies Orange for nasal samples. Thus, TNA-Cifer Reagent E improves safety by rapidly inactivating the virus during sample processing, potentially providing a safemeans for molecular SARS-CoV-2 testing outside traditional laboratory settings. The reagent also eliminates the need for column-based and/or automated viral RNA extraction/purification processes, thereby providing cost savings for equipment and reagents, as well as reducing processing and handling times. [ABSTRACT FROM AUTHOR]

Background: High-purity RNA serves as the basic requirement for downstream molecular analysis of plant species, especially the differential expression of genes to various biotic and abiotic stimuli. But, the extraction of high-quality RNA is usually difficult from plants rich in polysaccharides and polyphenols, and their presence usually interferes with the downstream applications. The aim of the study is to optimize the extraction of high-quality RNA from diverse plant species/tissues useful for downstream molecular applications. Results: Extraction of RNA using commercially available RNA extraction kits and routine hexadecyltrimethylammonium bromide (CTAB) methods did not yield good quality DNA-free RNA from Prosopis cineraria, Conocarpus erectus, and Phoenix dactylifera. A reliable protocol for the extraction of high-quality RNA from mature leaves of these difficult-to-extract trees was optimized after screening nine different methods. The DNase I-, and proteinase K treatment-free modified method, consisting of extraction with CTAB method followed by TRIzol, yielded high-quality DNA-free RNA with an A260/A280 and A260/A230 ratios > 2.0. Extraction of RNA from Conocarpus, the most difficult one, was successful by avoiding the heat incubation of ground tissue in a buffer at 65 oC. Pre-warming of the buffer for 5–10 min was sufficient to extract good-quality RNA. RNA integrity number of the extracted RNA samples ranged between 7 and 9.1, and the gel electrophoresis displayed intact bands of 28S and 18S RNA. A cDNA library constructed from the RNA of P. cineraria was used for the downstream applications. Real-time qPCR analysis using the cDNA from P. cineraria RNA confirmed the quality. The extraction of good quality RNA from samples of the desert-growing P. cineraria (> 20-years-old) collected in alternate months of the year 2021 (January to December covering winter, spring, autumn, and the very dry and hot summer) proved the efficacy of the protocol. The protocol’s broad applicability was further validated by extracting good-quality RNA from 36 difficult-to-extract plant species, including tissues such as roots, flowers, floral organs, fruits, and seeds. Conclusions: The modified DNase I and Proteinase K treatment-free protocol enables to extract DNA-free, high-quality, intact RNA from a total of 39 difficult-to-extract plant species belonging to 32 angiosperm families is useful to extract good-quality RNA from dicots and monocots irrespective of tissue types and growing seasons. [ABSTRACT FROM AUTHOR]

Sargassum (Sargassaceae) is widely distributed globally and plays an important role in regulating climate change, but the landscape of genomes and transcripts is less known. High‐quality nucleic acids are the basis for molecular biology experiments such as high‐throughput sequencing. Although extensive studies have documented methods of RNA extraction, these methods are not very applicable to Sargassum, which contains high levels of polysaccharides and polyphenols. To find a suitable method to improve the quality of RNA extracted, we compared and modified several popular RNA extraction methods and screened one practical method with three specific Sargassum spp. The results showed that three CTAB methods (denoted as Methods 1, 2, and 3) and the RNAprep Pure Plant Kit (denoted as Method 4) could, with slight modifications, effectively isolate RNA from Sargassum species, except for Method 4 used with S. fusiforme. By performing further screening, we determined Method 4 was the best choice for S. hemiphyllum and S. henslowianum, as revealed by RNA yields, RNA Integrity Number (RIN), extraction time, and unigene mapped ratio. For S. fusiforme, Methods 1, 2, and 3 showed no obvious differences among the yields, quality, or time to perform. In addition, one other method was tested, but we found the quality of the RNA extracted by TRIzol reagent methods (denoted as Method 5) performed the worst when compared with the above four methods. Therefore, our study provides four suitable methods for RNA extraction in Sargassum and is essential for future genetic exploration of Sargassum. [ABSTRACT FROM AUTHOR]

Procuring high-grade RNA from mature coconut tissues is a tricky and labor-intensive process due to the intricate scaffold of polysaccharides, polyphenols, lipids, and proteins that form firm complexes with nucleic acids. However, we have effectively developed a novel method for the first time, letting the retrieval of high-grade RNA from the roots, endosperm, and mesocarp of mature coconut trees take place. In this method, we exploited dichloromethane as a replacement to phenol/chloroform for RNA recovery from mature coconut tissues. The amount of high-grade RNA acquired from the roots of mature coconut trees was 120.7 µg/g, with an A260/280 ratio of 1.95. Similarly, the mature coconut mesocarp yielded 134.6 µg/g FW of quality RNA with A260/280 ratio of 1.98, whereas the mature coconut endosperm produced 120.4 µg/g FW of quality RNA with A260/280 ratio of 2.01. Furthermore, the RNA isolation using the dichloromethane method exhibited excellent performance in downstream experiments, particularly in RT-PCR for cDNA production and amplification. On the contrary, the RNA plant kit, TRIZOL, and Cetyl Trimethyl Ammonium Bromide (CTAB) methods were unsuccessful in isolating substantial quantities of RNA with exceptional purities from the mentioned coconut tissues. In view of these findings, we conclude that the newly developed method will be pivotal in effectively extracting RNA with high purity from mature coconut tissues. [ABSTRACT FROM AUTHOR]

Background Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has created high demand for molecular kits and consumables for mass screening of suspected individuals. Direct real-time polymerase chain reaction (RT-PCR) assay without nucleic acid extraction has several advantages in saving testing time and cost and helps in the rapid reporting of SARS-CoV-2. The present study evaluated the analytical performance of four SARS-CoV-2 RT-PCR for direct RT-PCR testing using preheated specimens. Methods A total of 100 clinical specimens were selected and divided into three different groups: (1) group I: 20 SARS-CoV-2 positive specimens with high viral load, viz., low Ct values (< 30 Ct), (2) group II: 50 SARS-CoV-2 positive specimens with low viral load, viz., high Ct values (> 30 Ct), and (3) group III: 30 SARS-CoV-2 negative specimens. Specimens were heat-inactivated at 70°C for 10 minutes and cooled down at 4°C and were evaluated for standard and direct RT-PCR method by using ViralDtect-II Multiplex Real-Time PCR kit, TaqPath COVID-19 Combo kit, COVIDsure Pro Multiplex RT-PCR kit, and Hi-PCR Coronavirus (COVID-19) Multiplex Probe PCR kit. Results Results showed that except ViralDtect-II kit, the other three TaqPath COVID-19 Combo kit, COVIDsure Pro kit, and Hi-PCR Coronavirus (COVID-19) RT-PCR kit were able to amplify all the SARS-CoV-2 genes in the direct RT-PCR method using preheated specimens. In group I specimens, 100% sensitivity was observed in all three RT-PCR kits. In group II specimens, COVIDsure Pro kit was found to be superior among other kits. Conclusion Direct RT-PCR method during pandemic situation is valuable and cost effective for the detection of SARS-CoV-2. All three TaqPath COVID-19 Combo kit, COVIDsure Pro kit, and Hi-PCR Coronavirus (COVID-19) RT-PCR kit can be used for direct RT-PCR method and COVIDsure Pro kit performance was found to be superior among all. [ABSTRACT FROM AUTHOR]

Real-time reverse transcription (rRT)-PCR, which is the reference standard for the diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, generally involves a time-consuming and costly RNA extraction step prior to amplification. We evaluated the performance of the AdvanSure One-Stop COVID-19 Plus Kit (LG Chem, Seoul, Korea), a novel rRT-PCR assay that can detect SARS-CoV-2 within 90 minutes using a streamlined RNA extraction method. In total, 509 nasopharyngeal swab (NPS) specimens (SARS-CoV-2 positive: N=205; SARS-CoV-2 negative: N=304) previously tested using the PowerChek SARS-CoV-2 Real-time PCR Kit (Kogene Biotech, Seoul, Korea) were tested using the AdvanSure assay. The limit of detection (LOD) of the AdvanSure assay was determined using serially diluted inactivated SARS-CoV-2. The positive and negative percent agreements between the AdvanSure and PowerChek assays were 99.5% (204/205) and 99.3% (302/304), respectively. The LODs of the AdvanSure assay for SARS-CoV-2 nucleocapsid and spike/RNA-dependent RNA polymerase genes were 672 and 846 copies/mL, respectively. The results show that the performance of the AdvanSure assay is comparable to that of the PowerChek assay used for routine SARS-CoV-2 testing, suggesting that the AdvanSure assay is a useful diagnostic tool for rapid and accurate detection of SARS-CoV-2 infection. [ABSTRACT FROM AUTHOR]

Despite advancements in RNA extraction methods, RNA extraction from sources rich in polyphenols and polysaccharides such as algae and seagrasses remains a challenge. Here we present a RNA extraction strategy using a hexadecyltrimethylammonium bromide (CTAB) extraction buffer and demonstrate its effectiveness on a broad range of red, green, and brown algae, as well as on the cyanobacterium Arthrospira platensis and the seagrass Zostera marina. For the vast majority of tested samples we achieved high yields of RNA comparable to those obtained from higher plants by commercially available kits (ranging from 3.9 to 125.9 µg RNA g−1 fresh weight). Analysis by UV/Vis spectrometry and capillary electrophoresis revealed high purity and integrity of obtained RNA extracts. For highly challenging species of brown algae like Fucus vesiculosus, Fucus serratus and Dictyosiphon foeniculaceus, we established an alternative procedure using a sodium dodecyl sulfate (SDS) extraction buffer in combination with a commercial kit. With this protocol, even higher RNA yields up to 317.0 µg g−1 fresh weight were extracted from polysaccharide-rich brown algae tissues. This study can serve as a guideline and starting point for the development of RNA extraction protocols for so far unstudied algal species from very diverse taxa. [ABSTRACT FROM AUTHOR]

RNA extraction from Mycobacterium tuberculosis has been a historically challenging task for researchers due to the thick lipids associated with the cell wall of this "notorious" pathogen that is responsible for Tuberculosis (TB) outbreaks. Several studies have successfully extracted RNA from M. tuberculosis using a Trizol reagent combined with organic solvents. Recently, our laboratory has successfully extracted high quality total RNA using a commercial kit from clinical strains belonging to F15/LAM4/KZN, Beijing and F11 strain families and H37Rv laboratory strain by exploiting high speed homogenizer for cell lysis and spin columns for RNA purification. The quality and integrity of the extracted RNA was analyzed and confirmed through the Nanodrop, Bioanalyzer and RNA 3-(N-morpholino) propanesulfonic acid (MOPS) gel electrophoresis. Furthermore, to confirm the integrity of small RNA (sRNA) molecules due to their vulnerability to degradation, the RNA samples were converted to cDNA and sRNAs were amplified and confirmed through PCR. This detailed RNA extraction protocol proposes to carve a new path into TB transcriptome research without the use of organic solvent for downstream purification steps while yielding high quality RNA that can be used to understand M. tuberculosis transcriptome regulation. [ABSTRACT FROM AUTHOR]

The extraction of a sufficient quantity of intact RNA from RNase-rich rat pancreas for estimation of gene transcript levels has been a long-standing challenge. This study provided simple modifications in the steps involved in the standard TRIzol RNA extraction method to set up a reproducible, applicable, and efficient protocol to be routinely used in the laboratory. A Nanodrop spectrophotometer was used to evaluate the RNA concentration, and purity (A 260 /A 280, and A 260 /A 230 absorbent ratios). Gel electrophoresis was used to assess RNA integrity. Further analysis included sequential RT-qPCR of a housekeeping gene to evaluate the optimized protocol. The current study demonstrated that the modified protocol rendered significantly more RNA concentration (mean: 635.8 ± 210.5 ng/μL) compared to the standard protocol (mean: 77.2 ± 25.9 ng/μL). Moreover, the modified protocol produced an improvement in the RNA purity (mean :A 260 /A 280 ratio = 1.89 ± 0.13; A 260 /A 230 ratio = 1.7 ± 0.16) compared to the standard protocol (mean: A 260 /A 280 ratio = 1.7 ± 0.26; A 260 /A 230 ratio = 2.5 ± 1.9). Additionally, RT-qPCR analysis revealed that the RNA extracted using the modified protocol resulted in significantly decreased (P < 0.001) Ct values (decreased by 6 Ct units) compared to the standard protocol, reflecting the good quality of the RNA. Conclusion: This study succeeded in providing golden tips to extract a high yield of good-quality RNA from RNase-rich rat pancreas for the sequential gene expression assays. [Display omitted] • Rat pancreas has a high level of RNase, which is one of the RNA extraction threats. • The standard TRIzol protocol provided degraded RNA of low concentration. • This study provided golden tips to obtain simple and reproducible protocol. • Improvement of RNA extraction help understand active pathways of pancreas. [ABSTRACT FROM AUTHOR]

Human noroviruses (HuNoVs) are among the main causes of acute gastroenteritis worldwide. HuNoVs can survive for several days up to weeks at room temperature in the environment, on food, and on food handling and processing surfaces. As a result, this could lead to viral spread through the ingestion of food in contact with contaminated surfaces. The development of stable surface materials with antiviral activity might be useful to reduce viral outbreaks. Metal-based compounds, including photoactivated titanium nanoparticles (TiO2 NPs), are known for their antiviral activity. In this study, we tested the impact of 2000 µg/mL TiO2 NPs, with or without UV activation, on HuNoV GII and murine norovirus. Their recovery rates were reduced by 99.6%. We also evaluated a new TiO2 NP-coating process on a polystyrene surface. This process provided a homogenous coated surface with TiO2 NPs ranging between 5 nm and 15 nm. Without photoactivation, this TiO2 NP-coated polystyrene surface reduced the recovery rates of intact HuNoV GII by more than 94%. When a capsid integrity treatment with PtCl4 or a longer reverse transcription polymerase chain detection approach was used to evaluate virus integrity following contact with the TiO2 NP-coated polystyrene, the HuNoV GII recovery yield reduction varied between 97 and 100%. These results support the hypothesis that TiO2 NP-coated surfaces have the potential to prevent viral transmission associated with contaminated food surfaces.

Abstract Background There is a growing interest in transcriptomics studies parallel to the advancement of transcriptome databases and bioinformatics, which provided the opportunity to study responses to growths, stimuli and stresses. There is an increase in demand for excellent RNA extraction techniques. General RNA extraction protocols can be used in RNA extraction, but the quality and quantity vary in different types of tissues from different organisms. Hence, a specific RNA extraction method for each organism’s tissue type is required to obtain the desired RNA quality and quantity. Results The improved CTAB RNA extraction method is superior to the PCI method and MRIP method for thick waxy leaves that were applied for mature sago palm (Metroxylon sagu Rottb.) leaf tissue and produce total RNA extract with good purity (OD 260/280 ≥ 1.8, OD 260/230 ≥ 2.0) and integrity (RIN ~ 7). RNA sequencing was conducted with the extracted samples and showed good assembly results (Q20 ≥ 97, Q30 ≥ 91%, assembly mean length ≥ 700 bp). Conclusion The improved CTAB RNA extraction method enables rapid, cost-effective, and relatively simple RNA extraction from waxy, fibrous and high-in-polyphenol sago palm (M. sagu Rottb.) leaf tissue with next-generation RNA sequencing recommended quality. Graphical Abstract

Rapid, easy-to-use, and low-cost systems for biological sample testing are important for point-of-care diagnostics and various other health applications. The recent pandemic of Coronavirus Disease 2019 (COVID-19) caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) showed an urgent need to rapidly and accurately identify the genetic material of SARS-CoV-2, an enveloped ribonucleic acid (RNA) virus, in upper respiratory specimens from people. In general, sensitive testing methods require genetic material extraction from the specimen. Unfortunately, current commercially available extraction kits are expensive and involve time-consuming and laborious extraction procedures. To overcome the difficulties associated with common extraction methods, we propose a simple enzymatic assay for the nucleic acid extraction step using heat mediation to improve the polymerase chain reaction (PCR) reaction sensitivity. Our protocol was tested on Human Coronavirus 229E (HCoV-229E) as an example, which comes from the large coronaviridae family of viruses that affect birds, amphibians, and mammals, of which SARS-CoV-2 is a member. The proposed assay was performed using a low-cost, custom-made, real-time PCR system that incorporates thermal cycling and fluorescence detection. It had fully customizable reaction settings to allow versatile biological sample testing for various applications, including point-of-care medical diagnosis, food and water quality testing, and emergency health situations. Our results show that heat-mediated RNA extraction is a viable extraction method when compared to commercial extraction kits. Further, our study showed that extraction has a direct impact on purified laboratory samples of HCoV-229E, but no direct impact on infected human cells. This is clinically relevant, as it allows us to circumvent the extraction step on clinical samples when using PCR. [ABSTRACT FROM AUTHOR]

Premise: The isolation of RNA from trees is challenging due to the interference of polyphenols and polysaccharides with downstream processes. Furthermore, many RNA extraction protocols are time consuming and involve hazardous chemicals. To address these issues, we aimed to develop a safe protocol for high‐quality RNA extraction from diverse Metrosideros taxa representing a broad range of leaf toughness, pubescence, and secondary metabolites. Methods and Results: We tested popular RNA isolation kits and protocols that were effective on other recalcitrant trees, including a broad range of optimization and purification steps. We optimized a protocol involving two silica‐membrane column‐based kits that yielded high‐quantity RNA with an RNA integrity number >7 and without DNA contamination. All RNA samples were used successfully in a follow‐on RNA‐Seq experiment. Conclusions: We present an optimized high‐throughput RNA extraction protocol that yielded high‐quality and high‐quantity RNA from three contrasting leaf phenotypes within a hyperdiverse woody species complex. [ABSTRACT FROM AUTHOR]

The transcriptome comprises all RNA molecules in a sample, tissue, or organism. A limitation of comparative transcriptomic studies which compare gene expression between individuals often under some differing exposure or treatment, of wild avian populations continues to be sample preservation of high-quality RNA (i.e., ribonucleic acids that transfer, translate, and regulate the genetic code from DNA into proteins). Field sampling of wild bird blood provides challenges as RNA degradation progresses quickly, due in large part to the high nuclease content of avian blood and because cryopreservation is often not feasible at remote locations. The introduction of commercial buffers for preservation of RNA enables field-collected studies as these buffers deactivate nucleases which degrade target nucleic acids. We seek to compare the effectiveness of widely available RNA stabilizing buffers, RNAlater (Ambion) and DNA/RNA Shield (Zymo) at varying concentrations along with a dry ice-based flash freezing method to determine optimal preservation methods for field-collected avian blood samples. To determine optimal preservation methods, we assessed RNA quantity and quality metrics: RNA integrity numbers (RINe), rRNA ratios, and total RNA concentration. Nucleated red blood cells, a characteristic common across non-mammalian vertebrates, provide sufficient transcriptionally active material enabling the identification of potentially active gene regions from small and non-lethal samples (∼ 20 μl). A protocol was also optimized for total RNA extraction from avian blood samples with small starting volumes enabling sampling of birds with a minimum threshold of 5 g body mass. We found that RNA preservation buffers, RNAlater and DNA/RNA Shield at all concentrations provide sample protection from RNA degradation. We recommend that caution be exercised when using dry ice-based flash-freezing alone for sample preservation as these samples resulted in lower quality measures then samples in preservation buffer. Total RNA concentration was generally not affected by preservation treatment and may vary due to differences in initial sample volumes. [ABSTRACT FROM AUTHOR]

Staphylococcus aureus evades antibiotic therapy and antimicrobial defenses by entering human host cells. Bacterial transcriptomic analysis represents an invaluable tool to unravel the complex interplay between host and pathogen. Therefore, the extraction of high-quality RNA from intracellular S. aureus lays the foundation to acquire meaningful gene expression data. In this study, we present a novel and straightforward strategy to isolate RNA from internalized S. aureus after 90 min, 24 h, and 48 h postinfection. Real-time PCR data were obtained for the target genes agrA and fnba, which play major roles during infection. The commonly used reference genes gyrB, aroE, tmRNA, gmk, and hu were analyzed under different conditions: bacteria from culture (condition I), intracellular bacteria (condition II), and across both conditions I and II. The most stable reference genes were used for the normalization of agrA and fnbA. Delta Cq (quantification cycle) values had a relatively low variability and thus demonstrated the high quality of the extracted RNA from intracellular S. aureus during the early phase of infection. The established protocol allows the extraction and purification of intracellular staphylococcal RNA while minimizing the amount of host RNA in the sample. This approach can leverage reproducible gene expression data to study host–pathogen interactions. [ABSTRACT FROM AUTHOR]

Research background. While it is clear that SARS CoV-2 coronavirus is the primary respiratory virus, there are no entirely clarified ways of transmission. Foodborne transmission has remained an unexplained path. Therefore, the goals of this paper are to examine and present an assessment of the most appropriate of the four selected kits for RNA extraction for the testing and detection of SARS-CoV-2 on food packaging surfaces, food surfaces, and in food. This will enable to indicate the possibility of infection through contact or direct food consumption. Experimental approach. Finding the best technique is vital as RNA extraction is one of the essential elements in detecting SARS-CoV-2. This was achieved through an experiment with four commercial kits following the original manufacturers' protocols, and with a modification of the original protocols that included the use of ethanol and isopropanol. The selected kit was used for RNA extraction from the swabs of packaging surfaces, food surface, and ready-to-eat food samples. The coronavirus was then identified using real-time reverse transcription-polymerase chain reaction (RT-PCR) assays to determine whether the SARS-CoV-2 virus or viral particles are present in the food chain with the overall purpose of demonstrating the possibility that food can contribute as a vehicle for the transmission of the virus. Results and conclusions. The findings of this investigation made the most effective extraction kit and protocol stand out. The results of the applicability of the kit indicated a significant share of positive samples of viral SARS-CoV-2 virus particles on surfaces from the environment where infected persons with 'silent' COVID-19 infection, with mild symptoms or no symptoms, were present. However, according to the findings of the second part of the study, the virus was not detected on the examined samples of food packaging surfaces, food surfaces, and food. Novelty and scientific contribution. The presented results distinguished one of the most suitable protocols for isolating RNA from environmental surface samples. The main contribution of the study is in the presentation of the results, that is, the examination of samples that are primarily related to the food chain, food packaging, food surfaces, and ready--to-eat food. The results of this study could also be helpful for further determination of the potential of food as a vector for the transmission of coronaviruses. [ABSTRACT FROM AUTHOR]

The emergence of the coronavirus 2019 (COVID-19) arose the need for rapid, accurate and massive virus detection methods to control the spread of infectious diseases. In this work, a device, deployable in non-medical environments, has been developed for the detection of non-amplified SARS-CoV-2 RNA. A SARS-CoV-2 specific probe was designed and covalently immobilized at the surface of glass slides to fabricate a DNA biosensor. The resulting system was integrated in a microfluidic platform, in which viral RNA was extracted from non-treated human saliva, before hybridizing at the surface of the sensor. The formed DNA/RNA duplex was detected in presence of SYBR Green I using an opto-electronic system, based on a high-power LED and a photo multiplier tube, which convert the emitted fluorescence into an electrical signal that can be processed in less than 10 min. The limit of detection of the resulting microfluidic platform reached six copies of viral RNA per microliter of sample (equal to 10 aM) and satisfied the safety margin. The absence of non-specific adsorption and the selectivity for SARS-CoV-2 RNA were established. In addition, the designed device could be applicable for the detection of a variety of viruses by simple modification of the immobilized probe.

High-quality mRNA extraction is essential for gene expression assays. In this study, we developed a rapid method (20 min) named FACTS for the extraction of intact RNA from Pseudomonas aeruginosa and compared its performance to established rapid techniques like RNAsnap and CiAR. The RNA integrity, yield, purity and presence of residual genomic DNA were adopted as assessment criteria. Multiple assays for RNA integrity were applied, including the Agilent 2200 TapeStation, QIAxcel capillary electrophoresis, and the newly available Qubit RNA Integrity and Quality (IQ) Assay Kit. The RNA purity and DNA/RNA yield were assessed by spectrophotometry and fluorimetry, respectively. Following Dnase treatment, two-step RT-qPCR for the expression of the rpoD reference gene was performed to evaluate the performance of each method. In terms of RNA integrity, FACTS showed the highest RNA integrity, while in terms of purity, CiAR scored best. RNAsnap resulted in a substantial amount of residual DNA. Pilot experiments for RNA extraction with FACTS from other Gram-negative and Gram-positive bacteria revealed promising results. FACTS is a novel RNA extraction method for rapid highly effective extraction of high-quality RNA from P. aeruginosa and can be used as a cost-efficient alternative to other methods in gene expression studies.