Search

Y-family DNA polymerase κ (Pol κ) can replicate damaged DNA templates to rescue stalled replication forks. Access of Pol κ to DNA damage sites is facilitated by its interaction with the processivity clamp PCNA and is regulated by PCNA mono-ubiquitylation. Here, we present cryo-EM reconstructions of human Pol κ bound to DNA, an incoming nucleotide, and wild type or mono-ubiquitylated PCNA (Ub-PCNA). In both reconstructions, the internal PIP-box adjacent to the Pol κ Polymerase-Associated Domain (PAD) docks the catalytic core to one PCNA protomer in an angled orientation, bending the DNA exiting the Pol κ active site through PCNA, while Pol κ C-terminal domain containing two Ubiquitin Binding Zinc Fingers (UBZs) is invisible, in agreement with disorder predictions. The ubiquitin moieties are partly flexible and extend radially away from PCNA, with the ubiquitin at the Pol κ-bound protomer appearing more rigid. Activity assays suggest that, when the internal PIP-box interaction is lost, Pol κ is retained on DNA by a secondary interaction between the UBZs and the ubiquitins flexibly conjugated to PCNA. Our data provide a structural basis for the recruitment of a Y-family TLS polymerase to sites of DNA damage., This research was supported by King Abdullah University of Science and Technology through core funding (to S.M.H.) and the Competitive Research Award Grant CRG8 URF/1/4036‐01‐01 (to S.M.H. and A.D.B.), and by the Wellcome Trust (to A.D.B.). R.C. acknowledges funding from the MINECO (CTQ2016-78636-P) and to AGAUR, (2017 SGR 324). The MD project has been carried out using CSUC resources. We acknowledge The Midlands Regional Cryo-EM Facility at the Leicester Institute of Structural and Chemical Biology (LISCB), major funding from MRC (MC_PC_17136). We thank Christos Savva (LISCB, University of Leicester) for his help in cryo-EM data collection and advice on data processing.

This work is based on our patent number “US 2015/0280017 A1”.; International audience; The process of effective solar energy harvesting and conversion requires efficient photon absorption, followed by charge generation and separation, then electron transfer. Nanostructured materials have been considered as potential building blocks for the development of future generations of solar cells. Much attention has been given to wide-bandgap semiconductor nanowires, combined and sensitized with low-bandgap semiconductors effectively attached to the nanowires for low-cost and highly efficient solar cells. Here, the in situ growth of lead sulfide (PbS) nanoparticles on the surface of zinc oxide (ZnO) nanowires grown by the Successive Ionic Layer Adsorption and Reaction (SILAR) technique is presented for different numbers of cycles. The morphology and structure of PbS nanoparticles are confirmed by Scanning Electron Microscopy (SEM), revealing the decoration of the nanowires with the PbS nanoparticles, Transmission Electron Microscopy (TEM) and HR-TEM, showing the tight attachment of PbS nanoparticles on the surface of the ZnO nanowires. The Selected Area Electron Diffraction (SAED) confirms the crystallization of the PbS. Photoluminescence spectra show a broad and more intense deep-level emission band.

In eukaryotes, DNA polymerase δ (Pol δ) bound to the proliferating cell nuclear antigen (PCNA) replicates the lagging strand and cooperates with flap endonuclease 1 (FEN1) to process the Okazaki fragments for their ligation. We present the high-resolution cryo-EM structure of the human processive Pol δ–DNA–PCNA complex in the absence and presence of FEN1. Pol δ is anchored to one of the three PCNA monomers through the C-terminal domain of the catalytic subunit. The catalytic core sits on top of PCNA in an open configuration while the regulatory subunits project laterally. This arrangement allows PCNA to thread and stabilize the DNA exiting the catalytic cleft and recruit FEN1 to one unoccupied monomer in a toolbelt fashion. Alternative holoenzyme conformations reveal important functional interactions that maintain PCNA orientation during synthesis. This work sheds light on the structural basis of Pol δ’s activity in replicating the human genome., Pol δ bound to the proliferating cell nuclear antigen (PCNA) replicates the lagging strand in eukaryotes and cooperates with flap endonuclease 1 (FEN1) to process the Okazaki fragments for their ligation. Here, the authors present a Cryo-EM structure of the human 4-subunit Pol δ bound to DNA and PCNA in a replicating state with an incoming nucleotide in the active site.

Precise genome editing by systems such as clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) requires high-efficiency homology-directed repair (HDR). Different technologies have been developed to improve HDR but with limited success. Here, we generated a fusion between the Cas9 endonuclease and the Agrobacterium VirD2 relaxase (Cas9-VirD2). This chimeric protein combines the functions of Cas9, which produces targeted and specific DNA double-strand breaks (DSBs), and the VirD2 relaxase, which brings the repair template in close proximity to the DSBs, to facilitate HDR. We successfully employed our Cas9-VirD2 system for precise ACETOLACTATE SYNTHASE (OsALS) allele modification to generate herbicide-resistant rice (Oryza sativa) plants, CAROTENOID CLEAVAGE DIOXYGENASE-7 (OsCCD7) to engineer plant architecture, and generate in-frame fusions with the HA epitope at HISTONE DEACETYLASE (OsHDT) locus. The Cas9-VirD2 system expands our ability to improve agriculturally important traits in crops and opens new possibilities for precision genome engineering across diverse eukaryotic species., Ali, Shami, Sedeek et al. generate a fusion between Cas9 and the VirD2 relaxase (Cas9-VirD2), which combines the functions of both proteins in producing targeted and specific double strand breaks and promoting homology-directed repair. They show the utility of their method by producing herbicide resistant rice.

Molecular diagnosis and surveillance of pathogens such as SARS‐CoV‐2 depend on nucleic acid isolation. Pandemics at the scale of COVID‐19 can cause a global shortage of proprietary commercial reagents and BSL‐2 laboratories to safely perform testing. Therefore, alternative solutions are urgently needed to address these challenges. An open‐source method, magnetic‐nanoparticle‐aided viral RNA isolation from contagious samples (MAVRICS), built upon readily available reagents, and easily assembled in any basically equipped laboratory, is thus developed. The performance of MAVRICS is evaluated using validated pathogen detection assays and real‐world and contrived samples. Unlike conventional methods, MAVRICS works directly in samples inactivated in phenol‐chloroform (e.g., TRIzol), thus allowing infectious samples to be handled safely without biocontainment facilities. MAVRICS allows wastewater biomass immobilized on membranes to be directly inactivated and lysed in TRIzol followed by RNA extraction by magnetic nanoparticles, thereby greatly reducing biohazard risk and simplifying processing procedures. Using 39 COVID‐19 patient samples and two wastewater samples, it is shown that MAVRICS rivals commercial kits in detection of SARS‐CoV‐2, influenza viruses, and respiratory syncytial virus. Therefore, MAVRICS is safe, fast, and scalable. It is field‐deployable with minimal equipment requirements and could become an enabling technology for widespread testing and wastewater monitoring of diverse pathogens., One important bottleneck in the diagnosis and surveillance of COVID‐19 is the shortage of kits for RNA extraction. Magnetic‐nanoparticle‐aided viral RNA isolation from contagious samples (MAVRICS) is an open‐source, safe, fast, and scalable method for RNA extraction. MAVRICS rivals commercial kits but requires minimal materials, and thus could become an enabling technology for widespread community testing of diverse pathogens.

Highlights • RT-LAMP coupled with CRISPR-Cas12 provides a sensitive and specific virus detection platform. • iSCAN sensitivity and specificity are comparable with RT-qPCR. • iSCAN is a 1 h detection module that can help in testing in low resource areas. • iSCAN can be developed as a one-pot assay. • iSCAN reagents can be produced locally and deployed for SARS-CoV2 detection., The COVID-19 pandemic caused by SARS-CoV-2 affects all aspects of human life. Detection platforms that are efficient, rapid, accurate, specific, sensitive, and user friendly are urgently needed to manage and control the spread of SARS-CoV-2. RT-qPCR based methods are the gold standard for SARS-CoV-2 detection. However, these methods require trained personnel, sophisticated infrastructure, and a long turnaround time, thereby limiting their usefulness. Reverse transcription-loop-mediated isothermal amplification (RT-LAMP), a one-step nucleic acid amplification method conducted at a single temperature, has been used for colorimetric virus detection. CRISPR-Cas12 and CRISPR-Cas13 systems, which possess collateral activity against ssDNA and RNA, respectively, have also been harnessed for virus detection. Here, we built an efficient, rapid, specific, sensitive, user-friendly SARS-CoV-2 detection module that combines the robust virus amplification of RT-LAMP with the specific detection ability of SARS-CoV-2 by CRISPR-Cas12. Furthermore, we combined the RT-LAMP-CRISPR-Cas12 module with lateral flow cells to enable highly efficient point-of-care SARS-CoV-2 detection. Our iSCAN SARS-CoV-2 detection module, which exhibits the critical features of a robust molecular diagnostic device, should facilitate the effective management and control of COVID-19.

One-step RT-qPCR is the most widely applied method for COVID-19 diagnostics. Designing in-house one-step RT-qPCR kits is restricted by the patent-rights for the production of enzymes and the lack of information about the components of the commercial kits. Here, we provide a simple, economical, and powerful one-step RT-qPCR kit based on patent-free, specifically-tailored versions of Moloney Murine Leukemia Virus Reverse Transcriptase and Thermus aquaticus DNA polymerase termed the R3T (Rapid Research Response Team) One-step RT-qPCR. Our kit was routinely able to reliably detect as low as 10 copies of the synthetic RNAs of the SARS-CoV-2. More importantly, our kit successfully detected COVID-19 in clinical samples of broad viral titers with similar reliability and selectivity as that of the Invitrogen SuperScript™ III Platinum™ One-step RT-qPCR and TaqPath™ 1-Step RT-qPCR kits. Overall, our kit has shown robust performance in both of laboratory settings and the Saudi Ministry of Health-approved testing facility.

Diagnosis and surveillance of emerging pathogens such as SARS-CoV-2 depend on nucleic acid isolation from clinical and environmental samples. Under normal circumstances, samples would be processed using commercial proprietary reagents in Biosafety 2 (BSL-2) or higher facilities. A pandemic at the scale of COVID-19 has caused a global shortage of proprietary reagents and BSL-2 laboratories to safely perform testing. Therefore, alternative solutions are urgently needed to address these challenges. We developed an open-source method calledMagnetic-nanoparticle-AidedViralRNAIsolation ofContagiousSamples (MAVRICS) that is built upon reagents that are either readily available or can be synthesized in any molecular biology laboratory with basic equipment. Unlike conventional methods, MAVRICS works directly in samples inactivated in acid guanidinium thiocyanate-phenol-chloroform (e.g., TRIzol), thus allowing infectious samples to be handled safely without biocontainment facilities. Using 36 COVID-19 patient samples, 2 wastewater samples and 1 human pathogens control sample, we showed that MAVRICS rivals commercial kits in validated diagnostic tests of SARS-CoV-2, influenza viruses, and respiratory syncytial virus. MAVRICS is scalable and thus could become an enabling technology for widespread community testing and wastewater monitoring in the current and future pandemics.

The deep-sea brines of the Red Sea are remote and unexplored environments characterized by high temperatures, anoxic water, and elevated concentrations of salt and heavy metals. This environment provides a rare system to study the interplay between halophilic and thermophilic adaptation in biologic macromolecules. The present article reports the first DNA polymerase with halophilic and thermophilic features. Biochemical and structural analysis by Raman and circular dichroism spectroscopy showed that the charge distribution on the protein's surface mediates the structural balance between stability for thermal adaptation and flexibility for counteracting the salt-induced rigid and nonfunctional hydrophobic packing. Salt bridge interactions via increased negative and positive charges contribute to structural stability. Salt tolerance, conversely, is mediated by a dynamic structure that becomes more fixed and functional with increasing salt concentration. We propose that repulsive forces among excess negative charges, in addition to a high percentage of negatively charged random coils, mediate this structural dynamism. This knowledge enabled us to engineer a halophilic version of Thermococcus kodakarensis DNA polymerase.-Takahashi, M., Takahashi, E., Joudeh, L. I., Marini, M., Das, G., Elshenawy, M. M., Akal, A., Sakashita, K., Alam, I., Tehseen, M., Sobhy, M. A., Stingl, U., Merzaban, J. S., Di Fabrizio, E., Hamdan, S. M. Dynamic structure mediates halophilic adaptation of a DNA polymerase from the deep-sea brines of the Red Sea.

Flap endonucleases catalyze cleavage of single-stranded DNA flaps formed during replication, repair, and recombination and are therefore essential for genome processing and stability. Recent crystal structures of DNA-bound human flap endonuclease (hFEN1) offer new insights into how conformational changes in the DNA and hFEN1 may facilitate the reaction mechanism. For example, previous biochemical studies of DNA conformation performed under non-catalytic conditions with Ca(2+) have suggested that base unpairing at the 5′-flap:template junction is an important step in the reaction, but the new structural data suggest otherwise. To clarify the role of DNA changes in the kinetic mechanism, we measured a series of transient steps, from substrate binding to product release, during the hFEN1-catalyzed reaction in the presence of Mg(2+). We found that whereas hFEN1 binds and bends DNA at a fast, diffusion-limited rate, much slower Mg(2+)-dependent conformational changes in DNA around the active site are subsequently necessary and rate-limiting for 5′-flap cleavage. These changes are reported overall by fluorescence of 2-aminopurine at the 5′-flap:template junction, indicating that local DNA distortion (e.g. disruption of base stacking observed in structures), associated with positioning the 5′-flap scissile phosphodiester bond in the hFEN1 active site, controls catalysis. hFEN1 residues with distinct roles in the catalytic mechanism, including those binding metal ions (Asp-34 and Asp-181), steering the 5′-flap through the active site and binding the scissile phosphate (Lys-93 and Arg-100), and stacking against the base 5′ to the scissile phosphate (Tyr-40), all contribute to these rate-limiting conformational changes, ensuring efficient and specific cleavage of 5′-flaps.

DNA replication and repair enzyme Flap Endonuclease 1 (FEN1) is vital for genome integrity, and FEN1 mutations arise in multiple cancers. FEN1 precisely cleaves single-stranded (ss) 5′-flaps one nucleotide into duplex (ds) DNA. Yet, how FEN1 selects for but does not incise the ss 5′-flap was enigmatic. Here we combine crystallographic, biochemical and genetic analyses to show that two dsDNA binding sites set the 5′polarity and to reveal unexpected control of the DNA phosphodiester backbone by electrostatic interactions. Via ‘phosphate steering’, basic residues energetically steer an inverted ss 5′-flap through a gateway over FEN1’s active site and shift dsDNA for catalysis. Mutations of these residues cause an 18,000-fold reduction in catalytic rate in vitro and large-scale trinucleotide (GAA)n repeat expansions in vivo, implying failed phosphate-steering promotes an unanticipated lagging-strand template-switch mechanism during replication. Thus, phosphate steering is an unappreciated FEN1 function that enforces 5′-flap specificity and catalysis, preventing genomic instability., Flap Endonuclease 1 is a DNA replication and repair enzyme indispensable for maintaining genomic stability. Here the authors provide mechanistic details on how FEN1 selects for 5′-flaps and promotes catalysis to avoid large-scale repeat expansion by a process termed ‘phosphate steering’.

Real-time visualization of single-proteins or -complexes on nucleic acid substrates is an essential tool for characterizing nucleic acid binding proteins. Here, we present a novel surface-condition independent and high-throughput single-molecule optical imaging platform called ‘DNA skybridge’. The DNA skybridge is constructed in a 3D structure with 4 μm-high thin quartz barriers in a quartz slide. Each DNA end is attached to the top of the adjacent barrier, resulting in the extension and immobilization of DNA. In this 3D structure, the bottom surface is out-of-focus when the target molecules on the DNA are imaged. Moreover, the DNA skybridge itself creates a thin Gaussian light sheet beam parallel to the immobilized DNA. This dual property allows for imaging a single probe-tagged molecule moving on DNA while effectively suppressing interference with the surface and background signals from the surface.

Processive DNA synthesis by the alpha epsilon theta core of the Escherichia coli Pol III replicase requires it to be bound to the beta(2) clamp via a site in the a polymerase subunit. How the epsilon proofreading exonuclease subunit influences DNA synthesis by alpha was not previously understood. In this work, bulk assays of DNA replication were used to uncover a non-proofreading activity of epsilon. Combination of mutagenesis with biophysical studies and single-molecule leading-strand replication assays traced this activity to a novel beta-binding site in e that, in conjunction with the site in a, maintains a closed state of the alpha epsilon theta-beta(2) replicase in the polymerization mode of DNA synthesis. The epsilon-beta interaction, selected during evolution to be weak and thus suited for transient disruption to enable access of alternate polymerases and other clamp binding proteins, therefore makes an important contribution to the network of protein-protein interactions that finely tune stability of the replicase on the DNA template in its various conformational states.

In DNA replication, the antiparallel nature of the parental duplex imposes certain constraints on the activity of the DNA polymerases that synthesize new DNA. The leading-strand polymerase advances in a continuous fashion, but the lagging-strand polymerase is forced to restart at short intervals. In several prokaryotic systems studied so far, this problem is solved by the formation of a loop in the lagging strand of the replication fork to reorient the lagging-strand DNA polymerase so that it advances in parallel with the leading-strand polymerase. The replication loop grows and shrinks during each cycle of Okazaki fragment synthesis. The timing of Okazaki fragment synthesis and loop formation is determined by a subtle interplay of enzymatic activities at the fork. Recent developments in single-molecule techniques have enabled the direct observation of these processes and have greatly contributed to a better understanding of the dynamic nature of the replication fork. Here, we will review recent experimental advances, present the current models, and discuss some of the exciting developments in the field.

DNA primases catalyze the synthesis of the oligoribonucleotides required for the initiation of lagging strand DNA synthesis. Biochemical studies have elucidated the mechanism for the sequence-specific synthesis of primers. However, the physical interactions of the primase with the DNA template to explain the basis of specificity have not been demonstrated. Using a combination of surface plasmon resonance and biochemical assays, we show that T7 DNA primase has only a slightly higher affinity for DNA containing the primase recognition sequence (5'-TGGTC-3') than for DNA lacking the recognition site. However, this binding is drastically enhanced by the presence of the cognate Nucleoside triphosphates (NTPs), Adenosine triphosphate (ATP) and Cytosine triphosphate (CTP) that are incorporated into the primer, pppACCA. Formation of the dimer, pppAC, the initial step of sequence-specific primer synthesis, is not sufficient for the stable binding. Preformed primers exhibit significantly less selective binding than that observed with ATP and CTP. Alterations in subdomains of the primase result in loss of selective DNA binding. We present a model in which conformational changes induced during primer synthesis facilitate contact between the zinc-binding domain and the polymerase domain.

The tau subunit of Escherichia coli DNA polymerase III holoenzyme interacts with the alpha subunit through its C-terminal Domain V, tau(C)16. We show that the extreme C-terminal region of tau(C)16 constitutes the site of interaction with alpha. The tau(C)16 domain, but not a derivative of it with a C-terminal deletion of seven residues (tau(C)16Delta7), forms an isolable complex with alpha. Surface plasmon resonance measurements were used to determine the dissociation constant (K(D)) of the alpha-tau(C)16 complex to be approximately 260 pM. Competition with immobilized tau(C)16 by tau(C)16 derivatives for binding to alpha gave values of K(D) of 7 muM for the alpha-tau(C)16Delta7 complex. Low-level expression of the genes encoding tau(C)16 and tau(C)16triangle up7, but not tau(C)16Delta11, is lethal to E. coli. Suppression of this lethal phenotype enabled selection of mutations in the 3' end of the tau(C)16 gene, that led to defects in alpha binding. The data suggest that the unstructured C-terminus of tau becomes folded into a helix-loop-helix in its complex with alpha. An N-terminally extended construct, tau(C)24, was found to bind DNA in a salt-sensitive manner while no binding was observed for tau(C)16, suggesting that the processivity switch of the replisome functionally involves Domain IV of tau.

The DNA polymerases involved in DNA replication achieve high processivity of nucleotide incorporation by forming a complex with processivity factors. A model system for replicative DNA polymerases, the bacteriophage T7 DNA polymerase (gp5), encoded by gene 5, forms a tight, 1∶1 complex with Escherichia coli thioredoxin. By a mechanism that is not fully understood, thioredoxin acts as a processivity factor and converts gp5 from a distributive polymerase into a highly processive one. We use a single-molecule imaging approach to visualize the interaction of fluorescently labeled T7 DNA polymerase with double-stranded DNA. We have observed T7 gp5, both with and without thioredoxin, binding nonspecifically to double-stranded DNA and diffusing along the duplex. The gp5/thioredoxin complex remains tightly bound to the DNA while diffusing, whereas gp5 without thioredoxin undergoes frequent dissociation from and rebinding to the DNA. These observations suggest that thioredoxin increases the processivity of T7 DNA polymerase by suppressing microscopic hopping on and off the DNA and keeping the complex tightly bound to the duplex.

We present single-molecule studies of the replication machinery of Escherichia coli and describe the visualization of individual E. coli DNA polymerase III (Pol III) holoenzymes engaging in primer extension and leading-strand synthesis. When coupled to the replicative helicase DnaB, Pol III mediates leading-strand synthesis with a processivity of 10.5 kb, 8-fold higher than that of primer extension by Pol III alone. Addition of the primase DnaG to the replisome causes a 3-fold reduction in the processivity of leading-strand synthesis, an effect dependent upon the DnaB-DnaG protein-protein interaction rather than primase activity. A single-molecule analysis of the replication kinetics with varying DnaG concentrations indicates that a cooperative binding of 2–3 DnaG monomers to the propagating DnaB destabilizes the replisome. The modulation of DnaB helicase activity through the interaction with DnaG suggests a mechanism that prevents leading-strand synthesis from outpacing lagging-strand synthesis during slow primer synthesis on the lagging strand.

The catalytic core of Escherichia coli DNA polymerase III contains three tightly associated subunits, the α, ε, and θ subunits. The θ subunit is the smallest and least understood subunit. The three-dimensional structure of θ in a complex with the unlabeled N-terminal domain of the ε subunit, ε186, was determined by multidimensional nuclear magnetic resonance spectroscopy. The structure was refined using pseudocontact shifts that resulted from inserting a lanthanide ion (Dy 3+ , Er 3+ , or Ho 3+ ) at the active site of ε186. The structure determination revealed a three-helix bundle fold that is similar to the solution structures of θ in a methanol-water buffer and of the bacteriophage P1 homolog, HOT, in aqueous buffer. Conserved nuclear Overhauser enhancement (NOE) patterns obtained for free and complexed θ show that most of the structure changes little upon complex formation. Discrepancies with respect to a previously published structure of free θ (Keniry et al., Protein Sci. 9: 721-733, 2000) were attributed to errors in the latter structure. The present structure satisfies the pseudocontact shifts better than either the structure of θ in methanol-water buffer or the structure of HOT. satisfies these shifts. The epitope of ε186 on θ was mapped by NOE difference spectroscopy and was found to involve helix 1 and the C-terminal part of helix 3. The pseudocontact shifts indicated that the helices of θ are located about 15 Å or farther from the lanthanide ion in the active site of ε186, in agreement with the extensive biochemical data for the θ-ε system.

Bacteriophage T7 DNA polymerase (gene 5 protein, gp5) interacts with its processivity factor, Escherichia coli thioredoxin, via a unique loop at the tip of the thumb subdomain. We find that this thioredoxin-binding domain is also the site of interaction of the phage-encoded helicase/primase (gp4) and ssDNA binding protein (gp2.5). Thioredoxin itself interacts only weakly with gp4 and gp2.5 but drastically enhances their binding to gp5. The acidic C termini of gp4 and gp2.5 are critical for this interaction in the absence of DNA. However, the C-terminal tail of gp4 is not required for binding to gp5 when the latter is bound to a primer/template. We propose that the thioredoxin-binding domain is a molecular switch that regulates the interaction of T7 DNA polymerase with other proteins of the replisome.

Electrospray ionization mass spectrometry (ESI-MS) has widespread routine use as a tool in proteomics for confirmation of primary structure determination and for characterization of purified proteins (Griffiths et al. 2001). Application of ESI-MS to detection and characterization of non-covalent complexes of biomolecules is not as well established, but there are now many examples of noncovalent interactions that have been studied in the gas phase, including those between protein subunits, proteins and nucleic acids, and enzymes and substrates (Veenstra 1999; Burkitt et al. 2003; Sanglier et al. 2003). The most obvious use of ESI-MS for study of these complexes is in determination of the stoichiometry of binding partners, and this has recently been extended to monitor subunit exchange between small heat shock proteins in real time (Sobott et al. 2002). The establishment of stoichiometry is a prelude to more detailed structural determination of biomolecules in complexes. The stability of the complex (dissociation constants), the types of noncovalent interactions (e.g., polar vs. nonpolar), and conformational changes in the binding partners upon complex formation are important when considering the mechanism of biological action of biomolecular complexes (e.g., protein–protein, protein–DNA). There is a suite of biophysical techniques that can be applied to study these properties. These range from monitoring of changes in fluorescence or surface plasmon resonance (SPR) for determination of dissociation constants and use of circular dichroism and NMR spectroscopy for following conformational changes, ultimately to determination of complete structures of complexes by NMR, X-ray crystallography, or cryo-electron microscopy. ESI-MS offers speed and sensitivity in monitoring components of equilibrium mixtures. Consequently, there are increasing numbers of reports of its use for determination of dissociation constants or relative binding affinities of non-covalent complexes (Jorgensen et al. 1998; Kapur et al. 2002; Bligh et al. 2003). Furthermore, there are ESI-MS studies where the stabilities of noncovalent complexes have been assessed by their resistance to dissociation in the mass spectrometer using CID (collision-induced dissociation) or thermal denaturation experiments (Gupta et al. 2001; de Brouwer et al. 2002; Benesch et al. 2003). Nevertheless, data obtained from ESI-MS studies need to be interpreted with caution. First, the ionization process itself might perturb equilibria (Wang and Agnes 1999). Second, there is a paucity of information about changes in the strength or specificity of noncovalent interactions that occur on transfer from the condensed to the gas phase during the ionization process. The stabilities of complexes between biological macromolecules involve contributions from ionic, hydrogen bonding, hydrophobic, and/or van der Waals interactions. Several ESI-MS studies support the proposal that electrostatic interactions are strengthened in vacuo, while hydrophobic interactions are unaffected or weakened through loss of water during desolvation and/or ionization (Loo 1997). For these reasons, it is important to study the behavior of noncovalent complexes that have been well characterized in solution to enable evaluation of data from ESI-MS experiments. Recently, as part of a study aimed at investigating the behavior of noncovalent complexes on transferal from solution to the gas phase, we used ESI-MS to study the well-characterized Tus-Ter (protein–DNA) complex that terminates DNA replication in Escherichia coli (Kapur et al. 2002). We showed that relative binding affinities of mutant Tus proteins for double-stranded TerB DNA were the same in the gas phase as in solution, and conversely, that the relative affinities of wild-type Tus for various double-stranded DNA sequences were unchanged on transferal to the gas phase. Both the X-ray structure (Kamada et al. 1996) and SPR studies of the ionic strength dependence of dissociation of the Tus-TerB complex (Neylon et al. 2000) show there are substantial polar and electrostatic contacts between the binding partners. Consistent with this, ESI mass spectra showed that dissociation of the complex required high concentrations of ammonium acetate, in the range of 1–2 M (Kapur et al. 2002). For the present work, we used ESI-MS to investigate the predominantly hydrophobic interactions between two protein subunits of E. coli DNA polymerase III: the θ subunit, and the N-terminal domain (residues 2–186) of the ɛ subunit (ɛ186). DNA polymerase III is a multisubunit enzyme that is the major replicative polymerase of E. coli (Kelman and O’Donnell 1995; McHenry 2003). Three of the 10 subunits, α, ɛ, and θ, comprise the catalytic core: the large α-subunit contains the polymerase active site, and ɛ contributes the proofreading 3′→5′ exonuclease activity, while the precise function of θ is not known (Studwell-Vaughan and O’Donnell 1993; Kunkel and Bebenek 2000). The ɛ subunit consists of two domains (Perrino et al. 1999; Taft-Benz and Schaaper 1999; Hamdan et al. 2000). The N-terminal domain (ɛ186) contains the exonuclease active site and forms a stable 1:1 complex with θ (Perrino et al. 1999; Hamdan et al. 2002a). The complex forms readily and essentially quantitatively on mixing of the two subunits, and is sufficiently stable that it can be isolated by ion-exchange chromatography (Hamdan et al. 2002a). It is stable for extended periods at 25°C in aqueous solution under conditions required for NMR studies (Pintacuda et al. 2004). Although there is no high-resolution structure yet available for the ɛ186–θ complex, we have reported the crystal structure of ɛ186 (Hamdan et al. 2002b) and the solution structure of θ (Keniry et al. 2000). NMR chemical shift mapping experiments in the latter study suggested that a series of small hydrophobic residues on the external face of the first helix of θ (residues 21–27, AAAGVAF) are involved in its association with ɛ186, and this has been confirmed in the more recent NMR structure of θ in the ɛ186–θ complex (M. Keniry, pers. comm.). Moreover, recent comparisons of NMR spectra of free ɛ186 and ɛ186–θ have identified hydrophobic residues in ɛ at the θ-binding interface, including Ile31, Val50, Val58, Ile68, Leu74, Ile154, Leu161, Leu165, and Leu166 (DeRose et al. 2003). It appears, therefore, that interaction between the two proteins is mediated largely via aliphatic side chains, and the forces that hold them together are largely hydrophobic in nature. In the present work, we aimed to use ESI-MS to supply “snapshots” of components of mixtures of ɛ186 and θ. The stability of the ɛ186–θ complex was studied under various solution and instrumental conditions. Its stability at high ionic strength is consistent with a dominant contribution of nonpolar interactions, in contrast with that of the Tus-Ter complexes, where interactions are primarily polar and electrostatic in nature and are disrupted at relatively low ionic strength (Kapur et al. 2002). In addition, ESI-MS experiments suggested that the ɛ subunit protects ɛ186 from aggregation in organic solvent/water mixtures. This is consistent with earlier experiments in which θ was shown to stabilize ɛ186 against thermal inactivation (Hamdan et al. 2002a).

We present a simple technique for visualizing replication of individual DNA molecules in real time. By attaching a rolling-circle substrate to a TIRF microscope-mounted flow chamber, we are able to monitor the progression of single-DNA synthesis events and accurately measure rates and processivities of single T7 and Escherichia coli replisomes as they replicate DNA. This method allows for rapid and precise characterization of the kinetics of DNA synthesis and the effects of replication inhibitors.