Search

In recent years, small scale cogeneration systems (< 500 kWe) distributed in different geographical locations using biomass has received special attention as economically competitive and environmentally friendly ways of producing energy. These systems can be integrated to industrial and agricultural activities where biomass residues are generated and can be converted into electricity and thermal energy by combustion or gasification. The legislations of many European countries such as Italy concerning renewable energy and energy efficiency along the taxation schemes have raised the incentives for small scale cogeneration plants. Consequently, there is a clear economic interest of the companies in this sector and there is also a scientific interest towards demonstration of their energetic efficiency, environmental performance and reliability. Among the suggested technologies for the biomass conversion into energy, downdraft gasification (using air as gasification agent), coupled with internal combustion engines, has the advantage of high electric efficiency (~ 25%) and low tar generation, making easier the gas cleaning process necessary for its use into engines. In the present work, the results of a measurement campaign performed on a commercial scale 350 kWth downdraft woodchips gasification plant, coupled with an SI internal combustion engine (ICE), are presented and discussed. The main goals of this first experimental campaign have been to verify the stability of gasifier and engine operation, operability of the plant and to determine its energy efficiency. The campaign verified a stable operation of the gasifier and the plant produced a syngas with a composition suitable for a gas engine. The energy balance resulted in a potential overall wood fuel to electricity efficiency of about 23 %.

Actually, several applications of small (=1 MWe) CHP (Combined Heat and Power) plants fuelled with solid wood can be found in Europe. Innovative technologies are facing the market, giving new perspectives for wood utilisation in district heating and/or in industrial-commercial activities. However, while the energy saving and the environmental benefits of CHP plants are undoubted, technological and no technological barriers still obstacle their large diffusion. The present study reports a comparative evaluation of the different available technologies in terms of thermal and electric efficiencies and their possible applications. Taking into consideration the electric-thermal performances of each configuration and the actual economic incentives guaranteed by the Italian government, a preliminary estimation of economic convenience of each plant is given.

Accountability for global health issues such as a pandemic and its devastating consequences are usually ascribed to a virus, but a comprehensive view should also take into account the state of the host. Data suggests that excessive nutrition is to blame for a yet unknown but not negligible portion of deaths attributed to severe acute respiratory syndrome coronavirus 2. We analyzed the correlation between mean body mass index (BMI) and 2-year coronavirus disease 2019 (COVID-19) mortality rates reported by 181 countries worldwide. Almost two thirds of the countries included had a mean BMI greater or equal to 25, with death rates ranging from 3 to 6,280 per million. Death rates in countries with a mean BMI below 25 ranged from 3 to 1,533. When the analysis was restricted to countries where the extent of testing was deemed more representative of actual mortality, only 20.1% had a mean BMI <25 but the mortality difference persisted. A second analysis looking at pre-vaccination mortality obtained from a different source led to similar conclusions. Due to the nature of the variables, reverse causation can be excluded while common causation can not. A mean BMI <25 for a country seems to spare its citizens from the highest COVID-19 mortality rates. The impact of excess weight on global COVID-19 mortality is suspected to have been much higher than what currently perceived, here estimated at no less than a fourfold increase in mortality. Countries with normal mean BMI constitute precious test beds for the quantification of the effects of overeating on COVID-19 mortality., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Gabbrielli and Pugno.)

Dense packings of nonoverlapping bodies in three-dimensional Euclidean space R(3) are useful models of the structure of a variety of many-particle systems that arise in the physical and biological sciences. Here we investigate the packing behavior of congruent ring tori in R(3), which are multiply connected nonconvex bodies of genus 1, as well as horn and spindle tori. Specifically, we analytically construct a family of dense periodic packings of unlinked tori guided by the organizing principles originally devised for simply connected solid bodies [Torquato and Jiao, Phys. Rev. E 86, 011102 (2012)]. We find that the horn tori as well as certain spindle and ring tori can achieve a packing density not only higher than that of spheres (i.e., π/sqrt[18] = 0.7404...) but also higher than the densest known ellipsoid packings (i.e., 0.7707...). In addition, we study dense packings of clusters of pair-linked ring tori (i.e., Hopf links), which can possess much higher densities than corresponding packings consisting of unlinked tori.

The problem of tiling or tessellating (i.e., completely filling) three-dimensional Euclidean space R(3) with polyhedra has fascinated people for centuries and continues to intrigue mathematicians and scientists today. Tilings are of fundamental importance to the understanding of the underlying structures for a wide range of systems in the biological, chemical, and physical sciences. In this paper, we enumerate and investigate the most comprehensive set of tilings of R(3) by any two regular polyhedra known to date. We find that among all of the Platonic solids, only the tetrahedron and octahedron can be combined to tile R(3). For tilings composed of only congruent tetrahedra and congruent octahedra, there seem to be only four distinct ratios between the sides of the two polyhedra. These four canonical periodic tilings are, respectively, associated with certain packings of tetrahedra (octahedra) in which the holes are octahedra (tetrahedra). Moreover, we derive two families of an uncountably infinite number of periodic tilings of tetrahedra and octahedra that continuously connect the aforementioned four canonical tilings with one another, containing the previously reported Conway-Jiao-Torquato family of tilings [Conway et al., Proc. Natl. Acad. Sci. USA 108, 11009 (2011)] as a special case. For tilings containing infinite planar surfaces, nonperiodic arrangements can be easily generated by arbitrary relative sliding along these surfaces. We also find that there are three distinct canonical periodic tilings of R(3) by congruent regular tetrahedra and congruent regular truncated tetrahedra associated with certain packings of tetrahedra (truncated tetrahedra) in which the holes are truncated tetrahedra (tetrahedra). Remarkably, we discover that most of the aforementioned periodic tilings can be obtained by "retessellating" the well-known tiling associated with the face-centered-cubic lattice, i.e., by combining the associated fundamental tiles (regular tetrahedra and octahedra) to form larger polyhedra.

This work investigates the element distribution in Silene paradoxa growing on the mine dump of Fenice Capanne (Tuscany, Italy). The accumulation of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in root apoplast and symplast and in shoot was assessed and compared to the levels of the same metals in the respective rizosphere soils, analyzing both the total and the phytoavailable fractions. Levels of As, Cu, Fe, Pb and Zn, were above toxicity thresholds in both soil and shoot samples. Inter- and intra-element correlations were analyzed in plant and soil using different statistical methods. Soil total and phytoavailable metal concentration were shown not to be dominant in determining metal accumulation by the plant, since no significant positive correlation was found between metal concentration in soils and plants. Moreover, results indicated that S. paradoxa was able to cope with the studied multi-metal contaminated soil excluding the elements from its tissues and preferentially accumulating them into the root compartment, thus suggesting this species as possible good candidate for phytostabilization purposes., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This work was planned for providing useful information about the possibility of using serpentine adapted plants for phytoextraction of cadmium, element scarcely represented in such metalliferous environment. To this aim, we investigated variation in cadmium tolerance, accumulation and translocation in three Alyssum plants with different phenotypes: Alyssum bertolonii, that is a serpentine endemic nickel hyperaccumulator, and two populations of Alyssum montanum, one adapted and one not adapted to serpentine soils. Plants were hydroponically cultivated in presence of increasing concentrations of CdSO(4) for two weeks. For the metal concentration used in the experiments, the three different Alyssum populations showed variation in cadmium tolerance, accumulation and content. The serpentine adapted population of A. montanum showed statistically higher cadmium tolerance and accumulation than A. bertolonii and the population of A. montanum not adapted to serpentine soil thus deserving to be investigated for phytoextraction purposes. Furthermore, as for the kinetic parameters of the cadmium uptake system, A. montanum serpentine population presented a low apparent K(m) value, suggesting a high affinity for this metal of its uptake system, whereas the V(max) values were not significantly different among the plants. Present data revealed metallicolous plants are also suitable for the phytoremediation of metals underrepresented in the environment of their initial origin. Nonetheless, field trials on real contaminated soils are essential., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Purpose: This work was planned for providing a useful screening tool for the selection of Populus alba clones suitable for phytoremediation techniques. To this aim, we investigated variation in arsenic, cadmium, copper, and zinc tolerance, accumulation and translocation in three poplar clones through an in vitro screening. Poplars have been widely proposed for phytoremediation, as they are adaptable to grow on contaminated areas and able to accumulate metals. The investigation of possible differences among poplar clones in metal tolerance and accumulation deserves to be deeply studied and exploited for the selection of the more suitable tool for phytoremediation purposes., Methods: In vitro multiplied microshoots of a commercial and two autochthonous P. alba clones were subcultured on hormone-free WPM medium for 1 month and then transferred for 2 weeks onto media containing different concentrations of the metals investigated. At the end of the treatments, plantlets were sampled, weighed, and mineralised by wet ashing. Metal concentrations were determined by ICP-OES., Results: For the metal concentration used in the experiments, our clones of P. alba showed variation in metal tolerance, metal accumulation and content. The fast-growing commercial clone, even if rarely showing the highest plant metal concentration, displayed the highest metal content, suggesting biomass production as the key factor in evaluating the phytoextraction capacity of P. alba clones for the metals studied., Conclusions: Data demonstrated that in vitro screening of cuttings represents a valuable way of assessing the ability of different poplar clones to take up, tolerate and survive metal stress.

Background and Aims: Nickel (Ni) hyperaccumulation is a rare form of physiological specialization shared by a small number of angiosperms growing on ultramafic soils. The evolutionary patterns of this feature among European members of tribe Alysseae (Brassicaceae) are investigated using a phylogenetic approach to assess relationships among Ni hyperaccumulators at the genus, species and below-species level., Methods: Internal transcribed spacer (ITS) sequences were generated for multiple accessions of Alysseae. Phylogenetic trees were obtained for the genera of the tribe and Alyssum sect. Odontarrhena. All accessions and additional herbarium material were tested for Ni hyperaccumulation with the dimethylglyoxime colorimetric method., Key Results: Molecular data strongly support the poorly known hyperaccumulator endemic Leptoplax (Peltaria) emarginata as sister to hyperaccumulator species of Bornmuellera within Alysseae. This is contrary to current assumptions of affinity between L. emarginata and the non-hyperaccumulator Peltaria in Thlaspideae. The lineage Bornmuellera-Leptoplax is, in turn, sister to the two non-hyperaccumulator Mediterranean endemics Ptilotrichum rupestre and P. cyclocarpum. Low ITS sequence variation was found within the monophyletic Alyssum sect. Odontarrhena and especially in A. murale sensu lato. Nickel hyperaccumulation was not monophyletic in any of three main clades retrieved, each consisting of hyperaccumulators and non-hyperaccumulators of different geographical origin., Conclusions: Nickel hyperaccumulation in Alysseae has a double origin, but it did not evolve in Thlaspideae. In Bornmuellera-Leptoplax it represents an early synapomorphy inherited from an ancestor shared with the calcicolous, sister clade of Mediterranean Ptilotrichum. In Alyssum sect. Odontarrhena it has multiple origins even within the three European clades recognized. Lack of geographical cohesion suggests that accumulation ability has been lost or gained over the different serpentine areas of south Europe through independent events of microevolutionary adaptation and selection. Genetic continuity and strong phenotypic plasticity in the A. murale complex call for a reduction of the number of Ni hyperaccumulator taxa formally recognized.

The technologies employed for the preparation of conventional tissue engineering scaffolds restrict the materials choice and the extent to which the architecture can be designed. Here we show the versatility of stereolithography with respect to materials and freedom of design. Porous scaffolds are designed with computer software and built with either a poly(D,L-lactide)-based resin or a poly(D,L-lactide-co-epsilon-caprolactone)-based resin. Characterisation of the scaffolds by micro-computed tomography shows excellent reproduction of the designs. The mechanical properties are evaluated in compression, and show good agreement with finite element predictions. The mechanical properties of scaffolds can be controlled by the combination of material and scaffold pore architecture. The presented technology and materials enable an accurate preparation of tissue engineering scaffolds with a large freedom of design, and properties ranging from rigid and strong to highly flexible and elastic., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

Due to relatively high chelant dosages and potential environmental risks it is necessary to explore different approaches in the remediation of metal-contaminated soils. The present study focussed on the removal of metals (As, Cd, Cu, Pb and Zn) from a multiple metal-contaminated soil by growing Brassica carinata plants in succession to spontaneous metallicolous populations of Pinus pinaster, Plantago lanceolata and Silene paradoxa. The results showed that the growth of the metallicolous populations increased the extractable metal levels in the soil, which resulted in a higher accumulation of metals in the above-ground parts of B. carinata. Root exudates of the three metallicolous species were analysed to elucidate their possible role in the enhanced metal availability. The presence of metals stimulated the exudation of organic and phenolic acids as well as flavonoids. It was suggested that root exudates played an important role in solubilising metals in soil and in favouring their uptake by roots.

Cadmium and zinc tolerance were examined in populations of Silene paradoxa, one from uncontaminated calcareous soil (CVD) and one from a mine tailing (FC) (Cd<1-15 ppm, Zn 400-1300 ppm, pH 2-6). The mine population exhibited extremely high Zn and Cd tolerance levels, although the degrees of Cd and Zn enrichment relatively low at the population site. Cd and Zn hypertolerance in FC were associated with reduced rates of accumulation of these metals, both in roots and shoots (Cd), or exclusively in shoots (Zn). However, exclusion potentially explained only a minor part of the superior tolerance in FC. Cd hypertolerance in FC was associated with decreased, rather than enhanced phytochelatin accumulation. The remarkably high levels of Cd and Zn hypertolerance in FC might relate to the low soil pH, due to oxidation of sulphide minerals, and the absence of soil organic matter at the FC site.

A monotypic simple tiling by a 14-face polyhedron that does not admit an isohedral tiling is described. The tiling is triclinic and contains four distinct, but combinatorially equivalent, kinds of tile.

Arsenate tolerance, As accumulation and As-induced phytochelatin accumulation were compared in populations of Silene paradoxa, one from a mine site enriched in As, Cu and Zn, the other from an uncontaminated site. The mine population was significantly more arsenate-tolerant. Arsenate uptake and root-to-shoot transport were slightly but significantly higher in the non-mine plants. The difference in uptake was quantitatively insufficient to explain the difference in tolerance between the populations. As accumulation in the roots was similar in both populations, but the mine plants accumulated much less phytochelatins than the non-mine plants. The mean phytochelatin chain length, however, was higher in the mine population, possibly due to a constitutively lower cellular glutathione level. It is argued that the mine plants must possess an arsenic detoxification mechanism other than arsenate reduction and subsequent phytochelatin-based sequestration. This alternative mechanism might explain at least some part of the superior tolerance in the mine plants.

We report the isolation and characterization of endophytic bacteria, endemic to serpentine outcrops of Central Italy, from a nickel hyperaccumulator plant, Alyssum bertolonii Desv. (Brassicaceae). Eighty-three endophytic bacteria were isolated from roots, stems, and leaves of A. bertolonii and classified by restriction analysis of 16S rDNA (ARDRA) and partial 16S rDNA sequencing in 23 different taxonomic groups. All isolates were then screened for siderophore production and for resistance to heavy metals. One isolate representative of each ARDRA group was then tested for plant tissue colonization ability in sterile culture. Obtained results pointed out that, despite the high concentration of heavy metals present in its tissues, A. bertolonii harbors an endophytic bacterial flora showing a high genetic diversity as well as a high level of resistance to heavy metals that could potentially help plant growth and Ni hyperaccumulation.

The effects of cadmium (from 7.5 to 75 microM) on chloroplasts of rice were studied at the structural and biochemical level. Loss of pigments, reduction of thylakoids and decrease in oxygen evolution and Fv/Fm ratio occur in leaves following cadmium treatment. However, the amount of photosystem II reaction center proteins and that of its light harvesting complex is not affected, indicating that cadmium does not adversely influence the structural organization of this photosystem. In thylakoids isolated from cadmium-treated plants a loss in the capability to reduce 2,6-dichlorophenolindophenol is observed, which is partially restored if diphenylcarbazide is used as an electron donor, indicating that cadmium affects water splitting activity. In thylakoids isolated from control plants and treated with cadmium, diphenylcarbazide preserves most of the photosystem II activity lost after incubation with cadmium; most of the S(2) multiline electron paramagnetic resonance signal from the manganese cluster is lost, whereas the TyrD(+) and other signals are retained. Light-induced photosystem II damage, in vitro, is promoted by Cd-treatment as deduced from the mobility shift of the D1 protein observed by immunoblot.

•   Molecular phylogeny based on ribosomal internal transcribed spacer (ITS) sequences was studied to investigate the phyletic relationships among some nickel (Ni)-hyperaccumulating and nonhyperaccumulating species of the genus Alyssum in relation to their geographic distribution and Ni-hyperaccumulating phenotype. •   Thirty-seven samples belonging to 32 taxa were analysed by sequencing the polymerase chain reaction-amplified ITS region and performing neighbor joining, maximum parsimony and maximum likelihood phylogenetic analyses. •   The ITS region in the sampled species varied from 221 to 307 bp of ITS1 and from 194 to 251 bp of ITS2. A total of 765 characters was used to infer the phylogeny and the average nucleotide variation detected was 15.15%. •   Nickel-hyperaccumulation could have been lost or acquired independently more than once during the speciation of the genus. The geographical location of species could not be related to phylogenetic affinities.

• Chloroplast microsatellites (cpSSR) were used to analyze the patterns of genetic variation within and among populations of the serpentine endemic, Alyssum bertolonii . • Thirty-five different chloroplast haplotypes were identified in 90 plants sampled from nine populations originating from the four disjunct northern-Italian serpentine regions where the species is found. • High levels of genetic diversity were found within each of the populations sampled. Analysis of Molecular Variance (AMOVA) showed high degrees of differentiation among both different populations of the same serpentine region and different regions (Φ ST = 0.622, Φ CT = 0.252, respectively). • The results indicated that: each population was established by few founders and then subsequently differentiated the existing chloroplast haplotypes; each population is a distinct genetic entity; and populations within the same serpentine region are more related than populations from different regions.

In the present study, heterotrophic nickel-resistant bacteria were isolated and characterized from three different serpentine outcrops in central Italy populated by the nickel-hyperaccumulating plant Alyssum bertolonii. Bacteria were isolated from the rhizosphere of the plant and from soil portions at various distances from the plant. The proportion of nickel-resistant cfu was higher in proximity to the plant than in free soil. A total of 138 isolates was collected and grouped into 47 different operational taxonomic units (OTUs) by means of amplified ribosomal DNA restriction analysis (ARDRA) and into 25 heavy-metal resistant phenotypes. The phylogenetic position of strains belonging to 20 OTUs, representing more than the 70% of the total isolates, was determined by 16S rDNA sequencing. These analyses showed that the most represented genera in all three different outcrops were Pseudomonas and Streptomyces. Pseudomonas strains were found to be predominant in the plant rhizosphere, whereas Streptomyces strains were mainly present in the soil.

Eight populations of Silene paradoxa L. (Caryophyllaceae) growing in copper mine deposits, in serpentine outcrops or in uncontaminated soil in central Italy were studied. Genetic diversity was estimated using five polymorphic chloroplast microsatellite loci (cpSSR), identifying 27 different chloroplast haplotypes. The effective number of alleles, the haplotypic diversity and a stepwise mutational model-based parameter (DSH2) were computed. The effective number of alleles observed within populations from copper mine deposits was 20% that of the serpentine neighbouring populations, suggesting the occurrence of a founder effect. Moreover, 13 of the 27 different haplotypes scored were exclusive to only one population, indicating genetic isolation for all tolerant populations. Even the copper-tolerant populations appeared to have evolved independently. Finally, analysis of molecular variance (AMOVA) of the cpSSR markers gave statistical significance to the grouping of populations according to their geographical location. This study demonstrates that cpSSR markers could be a useful complementary tool to isoenzymes or random amplified polymorphic DNA markers for elucidating the pattern of genetic differentiation in heavy metal-tolerant populations.

Metal-contaminated sites can occur naturally in serpentine outcrops or as consequence of anthropogenic activities, such as mining deposits, aerial fallout from smelters and industrial processes. Serpentine outcrops are characterized by high levels of nickel, cobalt and chromium and present a typical vegetation which includes endemisms and plants which also live in uncontaminated soils. These latter metal-tolerant populations provide the opportunity to investigate the first steps in the differentiation of plant populations under severe selection pressure and to select plants to be used in the phytoremediation of industrially contaminated soils. In this report eight populations of Silene paradoxa L. (Caryophyllaceae) growing in copper mine deposits, in serpentine outcrops or in noncontaminated soil in central Italy, were analysed using random amplified polymorphic DNA (RAPD) markers to investigate the pattern of genetic variation. The genetic diversity observed in populations at copper mine deposits was found to be at least as high as that of the neighbouring serpentine populations. Analysis of molecular variance (AMOVA) of the RAPD markers gave high statistical significance to the groupings of populations according: (i) with their geographical location; and (ii) with the metals present in the soil of origin (copper vs. nickel), indicating that RAPD markers detected a polymorphism related to the soil contamination by copper. Finally, two RAPD bands exclusive to copper-tolerant populations were identified.

Root Surface acid phosphatase activity was assessed in seedlings of two species of Alyssum, one endemic to Tuscan serpentines (Alyssum bertolonii Desv.) and the other of wide occurrence (Alyssum saxatile L.), cultivated in solutions to which various concentrations of Ni 2+ , Ca 2+ and Mg 2+ were added. Treatments were applied in two factorial experiments of type 2 n . A concentration of 0.01 mM Ni 2+ markedly stimulated phosphatase activity in A. bertolonii, but slightly decreased it in A. saxatile. Increased Ca 2+ concentration stimulated enzyme activity in both species, hut in A. bertolonii the highest activity was obtained with low Ca 2+ concentrations, whilst the opposite occured in A. saxatile. A. bertolonii instead required high Mg 2+ concentrations to increase phosphatase activity significantly. The same concentrations were toxic to A. saxatile. In the serpentine species, favourable conditions for the increase of phosphatase activity were induced by a high Mg 2+ /Ca 2+ ratio, which also favoured dry mass production. Therefore it is possible that the increase of phosphatase activity might be an aspect of plant adaptation to serpentines.