Search

Ternary copolymerization is a cost‐effective and time‐saving approach to improve device performance and batch stability of polymer donors. However, the structure of the ternary polymer donor obtained by the traditional one‐pot polymerization is vague due to the different monomer reaction order, which has a great influence on the absorption, crystallization, molecular stacking, and device performance. Therefore, it is necessary to obtain terpolymers with definite structures, and systematically study the differences in device properties of polymers with different sequence structures. Herein, three terpolymers D1, D2, and D3 are developed. Random copolymer D3 is obtained via the traditional one‐pot method while alternating copolymer donor D1 and block copolymer D2 are synthesized by stepwise polymerization. Because the block copolymer D2 possess periodic sequence distribution and retains the excellent properties of the two polymer matrix very well, the D2‐based device shows enhanced tightened π‐face‐on molecular stacking, distinguished efficient exciton dissociation, and decreased energy loss. As a result, the D2:L8‐BO‐based polymer solar cells achieve one of a record power conversion efficiency of 19.03%. The work demonstrates changing the sequence structure of the polymers to synthesize well‐defined structures polymer donors not only maintains the features of polymer matrix, but also combines the advantages of ternary copolymerization. [ABSTRACT FROM AUTHOR]

After more than five decades, Moore's Law for transistors is approaching the end of the international technology roadmap of semiconductors (ITRS). The fate of complementary metal oxide semiconductor (CMOS) architecture has become increasingly unknown. In this era, 3D transistors in the form of gate-all-around (GAA) transistors are being considered as an excellent solution to scaling down beyond the 5 nm technology node, which solves the difficulties of carrier transport in the channel region which are mainly rooted in short channel effects (SCEs). In parallel to Moore, during the last two decades, transistors with a fully depleted SOI (FDSOI) design have also been processed for low-power electronics. Among all the possible designs, there are also tunneling field-effect transistors (TFETs), which offer very low power consumption and decent electrical characteristics. This review article presents new transistor designs, along with the integration of electronics and photonics, simulation methods, and continuation of CMOS process technology to the 5 nm technology node and beyond. The content highlights the innovative methods, challenges, and difficulties in device processing and design, as well as how to apply suitable metrology techniques as a tool to find out the imperfections and lattice distortions, strain status, and composition in the device structures. [ABSTRACT FROM AUTHOR]

Saponins are the main active components in Panax ginseng C. A. Mey. (PG), Panax quinquefolius L. (PQ), and Panax japonicus C. A. Mey. (PJ), which belong to the genus Panax in the Araliaceae family. Because the chemical components in the three species are similar, they are often mixed and misused in functional foods and pharmaceuticals applications. Therefore, it is urgent to establish a method to quickly distinguish among PG, PQ, and PJ. Ultraperformance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF/MS) was combined with data postprocessing to identify the main characteristic fragments (CFs) and the related neutral losses (NLs) of protopanaxadiol (PPD), protopanaxatriol (PPT), oleanolic acid (OLE), and ocotillol- (OCO-) type saponins. By comparing the mass spectral data, it was possible to rapidly classify and identify saponins in PG, PQ, and PJ. A total of twenty-three chemical components were identified in the PG samples, twenty-three components were identified in the PQ samples, and twenty-seven components were identified in the PJ samples. Among them, OCO-type saponins were characteristic of PQ and PJ. Ginsenoside Rf, which was absent from PQ, allowed for differentiation between PQ and PJ. The CFs and NLs in the mass spectra of the characteristic components of PG, PQ, and PJ allowed for the rapid classification and identification of these species. Additionally, these results provide technical support for the quality evaluation of Chinese herbal medicine and for constructing a scientific regulatory system.

Ternary polymerization are demonstrated as a feasible and successful method of optimizing absorption, energy level, and crystallinity by maintaining the excellent properties of a polymer matrix. However, the third unit inevitably interrupts the periodic sequence distribution of the ordering packing of conjugated backbones, and thus balancing the trade‐off between the advantages of the third component and the disruption caused by the nonperiodic sequence distribution remains a great challenge. Herein, two terpolymer donors L1 and L2 are developed by introducing diethyl‐5,5′"‐dibromo‐4,4′"‐bis(2‐ethylhexyl)‐[2,2′:5′,2′'‐terthiophene]‐3′,4′‐dicarboxylate (DDT) unit as the third component. Owing to the electron‐deficient ability and S···O non‐covalent intramolecular interactions of DDT, terpolymers L1 and L2 displays deeper energy levels, enhanced molecular rigidity, and planarity than PM6. After blending with L8‐BO, the L1‐based polymer solar cells exhibit well miscibility with L8‐BO, leading to a more well‐defined nanofibrous morphology, face‐on orientation, and a slight energy loss in the blend films. As a result, the optimized L1:L8‐BO‐based device achieves a record power conversion efficiency (PCE) as high as 18.75%. This work provides a feasible strategy to develop high‐performance polymer donors via utilizing S···O non‐covalent intramolecular interactions to improve the planarity of polymer donors. [ABSTRACT FROM AUTHOR]

The coronavirus disease 2019 (COVID-19) global pandemic, caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2), has been marked by severe cases demonstrating a "cytokine storm", an upsurge of pro-inflammatory cytokines in the bloodstream. NLRP3 inflammasomes, integral to the innate immune system, are speculated to be activated by SARS-CoV-2 within host cells. This review investigates the potential correlation between NLRP3 inflammasomes and COVID-19, exploring the cellular and molecular mechanisms through which SARS-CoV-2 triggers their activation. Furthermore, promising strategies targeting NLRP3 inflammasomes are proposed to mitigate the excessive inflammatory response provoked by SARS-CoV-2 infection. By synthesizing existing studies, this paper offers insights into NLRP3 as a therapeutic target, elucidating the interplay between COVID-19 and its pathophysiology. It serves as a valuable reference for future clinical approaches in addressing COVID-19 by targeting NLRP3, thus providing potential avenues for therapeutic intervention. [ABSTRACT FROM AUTHOR]

During the leaching process of ion-adsorbed rare earth ores, large amounts of non-rare earth impurities such as aluminum and iron will be generated. This study selected glutamic acid as a complex agent to selectively calculate aluminum ions; then, added non-ionic surfactants and extract and separate aluminum ions from a rare earth solution using the cloud point extraction method. The effects of solution pH, reaction temperature, equilibration time, amount of glutamic acid, reaction time, and amount of Triton X-114 on aluminum extraction were investigated. The results showed that with a Mglu:MAl ratio of 3:1, a solution pH of 4.5, a constant temperature of 40 °C, and the addition of 10 mL Triton X-114 after 10 min of reaction time, the single extraction efficiency of aluminum ions reached 78.01%, and the extraction efficiency of rare earths was only 5.09% after 10 min of equilibration time. The reaction equation of glutamic acid with aluminum ions was determined, and the lowest extraction concentration of aluminum ions in the glutamic acid complexation extraction solution was found to be cAl = 0.045 ± 0.003 g/L, with a separation coefficient of β(Al/RE) = 66.15. This result indicated that the aluminum ions in the mixed solution could be effectively separated from the rare earth ions when using glutamic acid as a complexing agent in combination with the turbidity point extraction method. [ABSTRACT FROM AUTHOR]