Search

Employing different bands of radar to detect precipitation information in identical regions enables the acquisition of a more comprehensive precipitation cloud structure, thereby refining the continuity and completeness of precipitation measurements. This study first compared the coincident data from CloudSat W-band cloud profiling radar (CPR) and Global Precipitation Measurement Mission (GPM) Ka-band precipitation radar (KaPR) from 2014 to 2017, and then a synthesis of the radar reflectivity from CPR and KaPR was attempted to obtain a complete cloud and precipitation structure. The findings of the reflectivity comparisons indicated that the echo-top height identified by CPR is on average 3.6 to 4.2 km higher than that from KaPR, due to the higher sensitivity. Because of strong attenuation of CPR by liquid-phase particles, the reflectivity below the height of the melting layer usually shows an opposite gradient to KaPR with decreasing altitude. The difference in the near-surface rain rates of CPR and KaPR was found to be related to reflectivity gradients in the vertical direction, and the larger the reflectivity gradients, the greater the differences in near-surface rain rates. For better representing the complete vertical structure of precipitation clouds and improving the consistency of the reflectivity and precipitation rate, the radar reflectivity was weighted, synthesized from CPR and KaPR based on the gradient difference of the reflectivity from the two radars. We presented the synthesis results for a stratiform cloud and a deep convective case, and Spearman’s rank correlation coefficient (rs) between the GPM combined radiometer precipitation rate and the radar reflectivity was utilized to analyze the performance of the synthesis. The consistency between synthesized reflectivity and precipitation rate in the non-liquid phase was improved compared with KaPR, and the rs of the ice and mixed phases was increased by about 12% and 10%, respectively.

The measurement error of differential reflectivity (ZDR), especially systematic ZDR bias, is a fundamental issue for the application of polarimetric radar data. Several calibration methods have been proposed and applied to correct ZDR bias. However, recent studies have shown that ZDR bias is time-dependent and can be significantly different on two adjacent days. This means that the frequent monitoring of ZDR bias is necessary, which is difficult to achieve with existing methods. As radar sensitivity has gradually been enhanced, large amounts of online solar echoes have begun to be observed in volume-scan data. Online solar echoes have a high frequency, and a known theoretical value of ZDR (0 dB) could thus allow the continuous monitoring of ZDR bias. However, online solar echoes are also affected by low signal-to-noise ratio and precipitation attenuation for short-wavelength radar. In order to understand the variation of ZDR bias in a C-band polarimetric radar at the Nanjing University of Information Science and Technology (NUIST-CDP), we analyzed the characteristics of online solar echoes from this radar, including the daily frequency of occurrence, the distribution along the radial direction, precipitation attenuation, and fluctuation caused by noise. Then, an automatic method based on online solar echoes was proposed to monitor the daily ZDR bias of the NUIST-CDP. In the proposed method, a one-way differential attenuation correction for solar echoes and a maximum likelihood estimation using a Gaussian model were designed to estimate the optimal daily ZDR bias. The analysis of three months of data from the NUIST-CDP showed the following: (1) Online solar echoes occurred very frequently regardless of precipitation. Under the volume-scan mode, the average number of occurrences was 15 per day and the minimum number was seven. This high frequency could meet the requirements of continuous monitoring of the daily ZDR bias under precipitation and no-rain conditions. (2) The result from the proposed online solar method was significantly linearly correlated with that from the vertical pointing method (observation at an elevation angle of 90°), with a correlation coefficient of 0.61, suggesting that the proposed method is feasible. (3) The day-to-day variation in the ZDR bias was relatively large, and 32% of such variations exceeded 0.2 dB, meaning that a one-time calibration was not representative in time. Accordingly, continuous calibration will be necessary. (4) The ZDR bias was found to be largely influenced by the ambient temperature, with a large negative correlation between the ZDR bias and the temperature.

Reflectivity factor bias caused by radar calibration errors would influence the accuracy of Quantitative Precipitation Estimations (QPE), and further result in spatial discontinuity in Multiple Ground Radars QPE (MGR-QPE) products. Due to sampling differences and random errors, the associated discontinuity cannot be thoroughly solved by the single-radar calibration method. Thus, a multiple-radar synchronous calibration approach was proposed to mitigate the spatial discontinuity of MGR-QPE. Firstly, spatial discontinuity was solved by the intercalibration of adjacent ground radars, and then calibration errors were reduced by referring to the Ku-Band Precipitation Radar (KuPR) carried by the Global Precipitation Measurement (GPM) Core Observatory as a standard reference. Finally, Mosaic Reflectivity and MGR-QPE products with spatial continuity were obtained. Using three S-band operational radars covering the lower reaches of the Yangtze River in China, this method was evaluated under four representative precipitation events. The result showed that: (1) the spatial continuity of reflectivity factor and precipitation estimation fields was significantly improved after bias correction, and the reflectivity differences between adjacent radars were reduced by 78% and 82%, respectively; (2) the MGR-QPE data were closer to gauge observations with the normalized absolute error reducing by 0.05 to 0.12.

This study presents a simulation framework for cloud and precipitation measurements via spaceborne millimeter wave radar composed of nine sub modules. To demonstrate the influence of the assumed physical parameters and optimizing the microphysical modeling of the hydrometeors, we first conducted a sensitivity analysis. The results indicated that the radar reflectivity was highly sensitive to the particle size distribution (PSD) parameter of the median volume diameter and particle density parameter, which can cause reflectivity variations of several to more than 10 dB. The variation in the prefactor of the mass-power relations that related to riming degree may result in an uncertainty of approximately 30-45 %. The particle shape and orientation also had a significant impact on the radar reflectivity. The spherical assumption may result in an average overestimation of the reflectivity by approximately 4-8 %, dependent on the particle shape and orientation modeling. Typical weather cases were simulated using optimal physical modeling accounting for the particle shapes, typical PSD parameters corresponding to the cloud precipitation types, mass-power relations for snow and graupel, and melting modeling. We present and validate the simulation results for a cold front stratiform cloud and a deep convective process with observations from W-band cloud profiling radar (CPR) on the CloudSat satellite. The simulated brightness band features, echo structure, and intensity showed good agreement with the CloudSat observations; the average relative error in the vertical profile was within 20 %. Our results quantify the uncertainty in the millimeter wave radar echo simulation that may be caused by the physical model parameters and provide a scientific basis for optimal forward modeling. They also provide suggestions for prior physical parameter constraints for the retrieval of the microphysical properties of clouds and precipitation. [ABSTRACT FROM AUTHOR]