Search

Abstract The functional silica/polyamide-imide composite films were prepared via simple ultrasonic blending, after the silica nanoparticles were modified by cationic surfactant—cetyltrimethyl ammonium bromide (CTAB). The composite films were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and thermomechanical analysis (TMA). CTAB-modified silica nanoparticles were well dispersed in the polyamide-imide matrix, and the amount of silica nanoparticles to PAI was investigated to be from 2 to 10 wt%. Especially, the coefficients of thermal expansion (CET) continuously decreased with the amount of silica particles increasing. The high thermal stability and low coefficient of thermal expansion showed that the nanocomposite films can be widely used in the enamel wire industry.

Over the past few years, considerable attention has been paid to high‐Ni layered cathode materials for high‐energy Li‐ion batteries (LIBs); however, these materials intrinsically have low thermal stability. Alternatively, the high‐voltage operation of low‐Ni materials may be one of the attractive ways to provide various options for designing advanced LIBs. Here, the structural, electrochemical, and thermal properties of LiNi0.5Co0.2Mn0.3O2 (NCM523) and LiNi0.80Co0.15Al0.05O2 (NCA) are investigated by setting up the same initial discharge capacity. In the high‐voltage region, NCM523 exhibits less anisotropic lattice distortion and maintains wider Li‐ion channels than NCA. After long‐term cycling, reduced Ni ions are observed near the cracks, grain boundaries, or between the primary particles in both materials, however, the chemical states of the Ni ions in NCA are more heterogeneously distributed, and the particle pulverization and microcrack propagation are more prominent; the structural integrity and electrochemical properties of the material are degraded. Moreover, the cyclability and thermal stability of NCM523 are superior to those of NCA, despite the higher charge cut‐off voltage of the former. Therefore, the utilization of low‐Ni layered cathode materials operated at high voltage is a strategic approach to expand the design factors of advanced LIBs. [ABSTRACT FROM AUTHOR]

Regulation of the stability and the quality of mitochondrial RNA is essential for the maintenance of mitochondrial and cellular functions in eukaryotes. We have previously reported that the eukaryotic poly(A)-specific ribonuclease (PARN) and the prokaryotic poly(A) polymerase encoded by AHG2 and AGS1 , respectively, coordinately regulate the poly(A) status and the stability of mitochondrial mRNA in Arabidopsis. Mitochondrial function of PARN has not been reported in any other eukaryotes. To know how much this PARN-based mitochondrial mRNA regulation is conserved among plants, we studied the AHG2 and AGS1 counterparts of the liverwort, Marchantia polymorpha , a member of basal land plant lineage. We found that M. polymorpha has one ortholog each for AHG2 and AGS1 , named Mp AHG2 and Mp AGS1 , respectively. Their Citrine-fused proteins were detected in mitochondria of the liverwort. Molecular genetic analysis showed that Mp AHG2 is essential and functionally interacts with Mp AGS1 as observed in Arabidopsis. A recombinant MpAHG2 protein had a deadenylase activity in vitro. Overexpression of Mp AGS1 and the reduced expression of Mp AHG2 caused an accumulation of polyadenylated Mp cox1 mRNA. Furthermore, Mp AHG2 suppressed Arabidopsis ahg2-1 mutant phenotype. These results suggest that the PARN-based mitochondrial mRNA regulatory system is conserved in land plants. [ABSTRACT FROM AUTHOR]

Continuous fibers produced from carbon nanotube (CNT) rugs through direct spinning find wide applications owing to their excellent mechanical and physical characteristics. However, the practical application of such fibers is difficult since spinnable CNTs synthesized at atmospheric pressure are of low quality. This paper aims to determine the critical conditions for successful CNT rug growth through chemical vapor deposition (CVD) at low pressures such that the resulting CNTs exhibit improved spinnability and uniformity. The parameters examined for this purpose are the heat treatment of the catalyst, growth time, growth pressure, and cooling environment. Such a study has not been reported in literature. Low-pressure (LP) CVD (LP-CVD), which facilitates the control of amorphous carbon to achieve high spinnability, produced directly spinnable CNT rugs up to 600 mm or more. The synthetic method presented in this paper yielded CNTs with spinnability higher than that reported in literature. Thus, the systematic study of the critical conditions required for successful CNT growth through LP-CVD can help obtain CNTs with high spinnability and reproducibility and can improve the commerciality of CNT rugs. [ABSTRACT FROM AUTHOR]

As device technology is scaling down, Vth's of NAND flash cell show a wide distribution due to process variations such as random dopant fluctuation, etc. Since the extension of Vth distribution is directly related to degradation of program performance of NAND flash, it is more challenging to meet the market requirements for applications such as solid-state drivers (SSD). This paper presents a novel program scheme, called Adaptive Multi-pulse Program (AMP), for the scaled multi-bit/cell NAND flash devices. In the proposed program scheme memory cells are classified into several groups based on their own program speeds. F-N tunneling characteristic of NAND cell array is considered in determining the level of program bias for each group. Adaptive program pulses are applied to the predefined groups so that cells reach their target verify level at the same time, regardless of the difference of their program speed. Our experimental results show that AMP achieves 20% improvement on program performance due to the reduction of the number of verify executions by 39% in 3-bit/cell architecture NAND flash memory of 21 nm CMOS technology. [ABSTRACT FROM PUBLISHER]

In this study, titanium metal acts as the titanium source to prepare oriented titanate nanotube thin film. The effects of preparation parameters, such as reaction temperature, duration and post-treatment conditions, on the film morphology and stability have been examined. A general formation mechanism for oriented titanate nanotube thin film is proposed on the basis of detailed observations of the products using two-dimensional surface SEM studies and TEM images. The overall formation of titanate nanotubes can be summarized as a sequence of four steps: (a) titanium dissolution and alkali titanate hydrogel formation; (b) alkali titanate hydrogel dissolution, increased TiO2-3 , TiO2(OH)2-2 or TinO2m-2n+m concentration and layered Na2Ti3O7 formation; (c) layered Na2Ti3O7 growth; (d) nanotube formation via Na2Ti3O7 splitting and the multilayer scrolling process. The Na2Ti3O7 lamellar structures split between the (010) planes into nanosheets. [ABSTRACT FROM AUTHOR]

Mesoporous titania with an average pore diameter of 2.6 nm and rutile crystalline structural wall was prepared by hydrolyzing TiOCl2 aqueous solution at lower temperature by using octyl polyethylene oxide surfactant as template-directing agent. The mesoporous structure of as-synthesized mesoporous rutile titania consisting of self-assembled nano crystals keeps stable after the removal of the surfactant by acetone extraction and following UV irradiation. The mesoporous rutile titania exhibits a good photocatalytic activity for gas-phase photo-oxidation of a mixture of benzene and methanol. A mechanism of self-assembly of nano titania crystals is proposed to explain the formation of mesoporous rutile titania. [Copyright &y& Elsevier]

Paper-based sensors fabricated using the pencil-on-paper method are expected to find wide usage in many fields owing to their low cost and high reproducibility. Here, hydrogen (H2) detection was realized by applying palladium (Pd) nanoparticles (NPs) to electronic circuits printed on paper using a metal mask and a pencil. We confirmed that multilayered graphene was produced by the pencil, and then characterized Pd NPs were added to the pencil marks. To evaluate the gas-sensing ability of the sensor, its sensitivities and reaction rates in the presence and absence of H2 were measured. In addition, sensing tests performed over a wide range of H2 concentrations confirmed that the sensor had a detection limit as low as 1 ppm. Furthermore, the sensor reacted within approximately 50 s at all H2 concentrations tested. The recovery time of the sensor was 32 s at 1 ppm and 78 s at 1000 ppm. Sensing tests were also performed using Pd NPs of different sizes to elucidate the relationship between the sensing rate and catalyst size. The experimental results confirmed the possibility of fabricating paper-based gas sensors with a superior sensing capability and response rate. [ABSTRACT FROM AUTHOR]

The possibility of exposure to botulinum neurotoxin (BoNT), a powerful and potential bioterrorism agent, is considered to be ever increasing. The current gold-standard assay, live-mouse lethality, exhibits high sensitivity but has limitations including long assay times, whereas other assays evince rapidity but lack factors such as real-time monitoring or portability. In this study, we aimed to devise a novel detection system that could detect BoNT at below-nanomolar concentrations in the form of a stretchable biosensor. We used a field-effect transistor with a p-type channel and electrodes, along with a channel comprising aligned carbon nanotube layers to detect the type E light chain of BoNT (BoNT/E-Lc). The detection of BoNT/E-Lc entailed observing the cleavage of a unique peptide and the specific bonding between BoNT/E-Lc and antibody BoNT/E-Lc (Anti-BoNT/E-Lc). The unique peptide was cleaved by 60 pM BoNT/E-Lc; notably, 52 fM BoNT/E-Lc was detected within 1 min in the device with the antibody in the bent state. These results demonstrated that an all-carbon nanotube-based device (all-CNT-based device) could be produced without a complicated fabrication process and could be used as a biosensor with high sensitivity, suggesting its potential development as a wearable BoNT biosensor. [ABSTRACT FROM AUTHOR]

Parkinson’s disease (PD) is characterized by progressive dopamine depletion and a loss of dopaminergic neurons in the substantia nigra pars compacta (SNpc). Treadmill exercise is a promising non-pharmacological approach for reducing the risk of PD and other neuroinflammatory disorders, such as Alzheimer’s disease. The goal of this study was to investigate the effects of treadmill exercise on α-synuclein-induced neuroinflammation and neuronal cell death in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced mouse model of PD. Eight weeks of treadmill exercise improved motor deficits and reduced α-synuclein expression, a major causative factor of PD-like symptoms, in MPTP mice. Treadmill exercise also down-regulated the expression of toll-like receptor 2 and its associated downstream signaling molecules, including myeloid differentiation factor-88, tumor necrosis factor receptor-associated factor 6, and transforming growth factor-β-activated protein kinase 1. These effects were associated with reduced ionized calcium-binding adapter molecule 1 expression, decreased IκBα and nuclear transcription factor-κB phosphorylation, decreased tumor necrosis factor α and interleukin-1β expression, and decreased NADPH oxidase subunit expression in the SNpc and striatum. Additionally, it promoted the expression of tyrosine hydroxylase and the dopamine transporter, as well as plasma dopamine levels, in MPTP mice; these effects were associated with decreased caspase-3 expression and cleavage, as well as increased Bcl-2 expression in the SNpc. Taken together, our data suggest that treadmill exercise improves MPTP-associated motor deficits by exerting neuroprotective effects in the SNpc and striatum, supporting the notion that treadmill exercise is useful as a non-pharmacological tool for the management of PD. [ABSTRACT FROM AUTHOR]

Abstract: A tartaric acid-assisted sol–gel process was used to synthesize Li2MnSiO4 (SG-LMS) nanopowders with orthorhombic structures (Pmn21 space group). The Li-active SG-LMS nanoparticles were fully surrounded by a conducting amorphous carbon layer/matrix that was formed by carbonization of the tartaric acid during post-annealing of the dry gel. The SG-LMS electrode exhibited higher specific capacity and superior cycle retention as compared to the LMS electrode prepared by a conventional solid-state reaction. Such high electrochemical performance originated from the presence of a high-purity phase, a large surface area, and an efficient electron transport path facilitated by the conductive carbon coating of the SG-LMS electrode. [Copyright &y& Elsevier]

Abstract: Transparent TiO2 sols were hydro-thermally prepared with heating Ti precursor solutions, from Ti hydroxides obtained with neutralizing aqueous TiOCl2 solutions having various concentrations of NaCl by aqueous NaOH solution, in the autoclave. The crystalline, microstructural and optical properties of the particles from TiO2 sols by freeze-drying or coating were investigated using XRD, BET, SEM, and UV–vis spectroscopy. With controlling the internal pressure in the autoclave by capturing Na ions in the lattice of Ti hydroxide how to prepare TiO2 sol containing composite of anatase and brookite phases was discussed. [Copyright &y& Elsevier]

Purpose: We investigated whether treadmill exercise (TE)-induced neuroprotection was associated with enhanced autophagy and reduced apoptosis in a mouse model of pharmacologically induced Parkinson's disease (PD)., Methods: PD was induced via the administration of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). C57BL/6 male mice were randomly assigned to the following three groups: control (C57BL, n=10), MPTP with probenecid (MPTP/C, n=10), and MPTP/ C plus exercise (MPTP-TE, n=10). The MPTP-TE mice performed TE training (10 m/min, 60 min/day, 5 days/week) for 8 weeks. The rotarod test was used to assess motor function., Results: TE restored MPTP/P-induced motor dysfunctionand increased tyrosine hydroxylase levels. Furthermore, TE diminished the levels of α-synuclein (α-syn), a neurotoxin; modulated the levels of autophagy-associated proteins, including microtubule-associated protein 1 light chain 3-II, p62, BECLIN1, BNIP3, and lysosomal-associated membrane protein-2, which enhanced autophagy; inhibited the activation of proapoptotic proteins (caspase-3 and BAX);and upregulated BCL-2, an antiapoptosis protein., Conclusion: Taken together, these results suggested that the TE-induced neuroprotection against MPTP-induced cell death was associated with enhanced autophagy and neuronal regeneration based on the findings of inhibited proapoptotic events in the brains of the TE-trained animals., (©2018 The Korean Society for Exercise Nutrition.)

Pexa-Vec (pexastimogene devacirpvec; JX-594) has emerged as an attractive tool in oncolytic virotherapy. Pexa-Vec demonstrates oncolytic and immunotherapeutic mechanisms of action. But the determinants of resistance to Pexa-Vec are mostly unknown. We treated hemoatologic malignant cells with Pexa-Vec and examined the gene-expression pattern of sensitive and resistant cells. Human myeloid malignant cell lines (RPMI-8226, IM-9, K562, THP-1) and lymphoid cancer cell lines (MOLT4, CCRF-CEM, Ramos, U937) were treated with Pexa-Vec. Pexa-Vec was cytotoxic on myeloid cell lines in a dose-dependent manner, and fluorescent imaging and qPCR revealed that Pexa-Vec expression was low in RAMOS than IM-9 after 24 hrs and 48 hrs of infection. Gene expression profiles between two groups were analyzed by microarray. Genes with at least 2-fold increase or decrease in their expression were identified. A total of 660 genes were up-regulated and 776 genes were down-regulated in lymphoid cancer cell lines. The up- and down-regulated genes were categorized into 319 functional gene clusters. We identified the top 10 up-regulated genes in lymphoid cells. Among them three human genes (LEF1, STAMBPL1, and SLFN11) strongly correlated with viral replication. Up-regulation of PVRIG, LPP, CECR1, Arhgef6, IRX3, IGFBP2, CD1d were related to resistant to Pexa-Vec. In conclusion, lymphoid malignant cells are resistant to Pexa-Vec and displayed up-regulated genes associated with resistance to oncolytic viral therapy. These data provide potential targets to overcome resistance, and suggest that molecular assays may be useful in selecting patients for further clinical trials with Pexa-Vec.

Large-scale graphene or carbon nanotube (CNT) films are good candidates for transparent flexible electrodes, and the strong interest in graphene and CNT films has motivated the scalable production of a good-conductivity and an optically transmitting film. Unzipping techniques for converting CNTs to graphene are especially worthy of notice. Here, we performed nanotube unzipping of the spun multi-walled carbon nanotubes (MWCNTs) to produce networked graphene nanoribbon (GNR) sheet films using an 02 plasma etching method, after which we produced the spun MWCNT film by continually pulling MWCNTs down from the vertical well aligned MWCNTs on the substrate. The electrical resistance was slightly decreased and the optical transmittance was significantly increased when the spun MWCNT films were etched for 20 min by O2 plasma of 100 mA. Plasma etching for the optimized time, which does not change the thickness of the spun MWCNT films, improved the electrical resistance and the optical transmittance.

Carbon nanofibers (CNFs) are good candidates for nano-system applications because they have the excellent mechanical and the electrical properties. The mechanical and electrical properties of a single CNF were measured. A tensile test and a measurement of the electrical resistance of CNFs during elongation were performed inside a scanning electron microscope. We confirmed that the CNFs used in this experiment consisted of a polycrystalline structure and an amorphous phase by a result of Raman. Additionally, we observed that the crystal structure in nanofibers exhibits brittle fracture behavior and the amorphous phase make them relatively ductile. The elastic moduli of the CNFs were 9.57 to 13.6 GPa in the elastic section. The electrical resistance of the CNFs exhibited unusual behavior during elongation. The electrical resistance of the CNFs exhibited stable resistance increase like as the tensile results in the initial region. But the electrical resistance exhibited generally irregular increase after initial region because of the polycrystalline structure and amorphous phase. The strain sensitivity of the CNFs exhibited a much lower value.

Physicians for ordinary people in Korea's Joseon Dynasty (1392-1910) did not need to pass the national medical licensing examination. They were able to work after a sufficient apprenticeship period. Only physician officers were licensed as technical civil servants. These physician officers were middle class, located socially between the nobility and the commoner. They had to pass a national licensing examination to be considered for high-ranking physician officer positions, that is, those at the rank equal to or above the 6th level out of a total of 9 ranks, where the first rank was highest. Royal physicians also had to pass this examination before accepting responsibility for the King's healthcare. This article aims to describe the world of physician officers during the Joseon Dynasty. Physician officers enjoyed considerable social status because they dealt with matters of life and death. Owing to the professional nature of their fields and a strong sense of group identity, they came to compose a distinct social class. The physician officers' world was marked by strong group allegiances based on shared professional knowledge; the use of marriage to gain and maintain social status; and the establishment of hereditary technical posts within the medical profession that were handed down from one generation to the next. The medical licensing examination persisted until 1894 when the civil service examination agency, of which it was part, was abolished. Until that time, the testing agency, the number of candidates who were accepted, two-step test procedures, and the method of test item selection were maintained and enforced.

(AD). Although physical exercise and AD have received attention in the scientific literature, the mechanism through which treadmill exercise may impact the brain insulin signaling of AD has not been elucidated. This study aimed to evaluate the neuroprotective effects of treadmill exercise on apoptotic factors (Bcl-2/Bax ratio, caspase-3), HSP70, COX-2, BDNF and PI3-K/Akt signaling pathway in the cortex of NSE/hPS2m transgenic mice model of AD. Treadmill exercise ameliorated cognitive function in water maze test and significantly increased the level of Bcl-2/Bax ratio and HSP-70 in Tg-exe group compared to Tg-con group; on the other hand, it significantly decreased the expression of caspase-3 and COX-2 in Tg-exe group compared to Tg-con group. In addition, treadmill exercise significantly increased the expression of BDNF and PI3K/Akt in Tg-exe group compared to Tg-con group. Consequently, treadmill exercise improves cognitive function possibly via activating neurotrophic factor, BDNF and PI3k/Akt signaling pathway, and Aβ-induced neuronal cell death in the cortex of Tg mice was markedly suppressed following treadmill exercise. These results suggest that treadmill exercise may be beneficial in preventing or treating Alzheimer's disease.

CuInS2 powders have been successfully prepared by simple heating a mixture of copper nitrate, indium nitrate and thiourea in ethylene glycol. The prepared powders were fully characterized by SEM, XRD and UV-Vis spectroscopy. The particle shape of the powders obtained with an optimal condition showed spherical shape with about 50 nm in size. The XRD results showed more enhanced crystallized CuInS2 with chalcopyrite structure with increasing reaction time. The values in band-gap energy of nano-sized CuInS2 powders would be estimated 1.63 eV, blue-shifted from that of micron-sized powders due to size quantization effect.

One-dimensional (1-D) layered titanate nanotubes and nanoribbon thin films were prepared via the hydrothermal reaction of Ti metal flakes with concentrated NaOH solution. TEM, SEM, and XRD studies of the reaction products revealed that 20-nm-wide and about 1-microm-long nanoribbons formed in 5 M NaOH aqueous solution at 140 degrees C for 12 h, while 6 aproximately 8-nm-wide and several hundred-nanometer-long nanotubes formed with 10 M NaOH. The effect of post treatments on the thermal stablity, phase structure and morphology of the as-prepared nanotubes films was investigated. Different morphologies and crystallinity changes of the as-prepared nanotubes films during heat treatment process are attributed to the sodium impurity.

In this study, various sized and shaped titanates were prepared using rutile phase TiO2 nano-powders in strong basic solution of NaOH having various metallic ions as chlorides by hydrothermal process. Obtained powders were fully characterized using SEM, TEM, XRD, and BET. The XRD results show that all obtained powders have layered structure. However, the shapes of particles doped with Zr4+ and Li+ show nano-belt and nano-plate, respectively, compared to those with nano-tubes of undoped, Ni2+ and Fe3+ doped. These results suggest that particle shape of titanates can be controlled only by small amount of doping elements in NaOH aqueous solutions.

The AIP1 fraction, a small water-soluble fraction purified from Artemisia iwayomogi, was shown to increase antibody production and suppress transplanted tumor cell growth in mice. In order to understand its immuno-modulating activity, we have examined the effect of the AIP1 on mouse thymocytes in vitro. Treatment of mouse thymocytes in culture with the fraction resulted in the suppression of the cell death and the extension of the cell survival. A mouse gene array provided a profile of gene expression change showing the pattern of up- and down-regulated genes by the AIP1 treatment, suggesting that the Fas/FasL-dependent apoptosis pathway might be modulated by the fraction.

Nano rutile, anatase, and bicrystalline (anatase + brookite) titania powders with an average crystal size of below 10 nm are prepared from aqueous TiOCl(2) solution at low temperatures by adjusting pH values of the starting solution and adding different additives. Adding a small amount of octyl phenol poly(ethylene oxide) into aqueous TiOCl(2) solution leads to the change of particle morphologies of obtained nano titania from needlelike to nano spherical rutile crystals. Amorphous-anatase transformation of titania could proceed in liquid-solid reaction at low temperatures, even at room temperature. A formation mechanism of rutile, anatase, and brookite titania was proposed. It is found that H(+) or H(3)O(+) plays a catalytic role in the phase transformation from amorphous to anatase titania and that the presence of a small amount of SO(4)(2)(-) ion is unfavorable to the formation of both rutile and brookite. By carefully adjusting preparation conditions, nano pure anatase with higher surface area, good crystallinity, and a lower recombination rate of photoexcited electrons and holes was obtained. This nano pure anatase showed a very good photocatalytic activity for gas-phase photo-oxidation of benzene.