Search

ABSTRACT Visual Determination of the Opacity of Emissions from Stationary Sources (Method 9) is a reference method established by U.S. Environmental Protection Agency (EPA) to quantify plume opacity. However, Method [...]

Profound screening and evaluation methods for biocide-releasing polymer films are crucial for predicting applicability and therapeutic outcome of these drug delivery systems. For this purpose, we developed an agar overlay assay embedding biopolymer composite films in a seeded microbial lawn. By combining this approach with model-dependent analysis for agar diffusion, antimicrobial potency of the entrapped drug can be calculated in terms of minimum inhibitory concentrations (MICs). Thus, the topical antiseptic 4-hexylresorcinol (4-HR) was incorporated into poly(lactic-co-glycolic acid) (PLGA) films at different loadings up to 3.7 mg/cm² surface area through a solvent casting technique. The antimicrobial activity of 4-HR released from these composite films was assessed against a panel of Gram-negative and Gram--positive bacteria, yeasts and filamentous fungi by the proposed assay. All the microbial strains tested were susceptible to PLGA-4-HR films with MIC values down to 0.4% (w/w). The presented approach serves as a reliable method in screening and quantifying the antimicrobial activity of polymer composite films. Moreover, 4-HR-loaded PLGA films are a promising biomaterial that may find future application in the biomedical and packaging sector. [ABSTRACT FROM AUTHOR]

A novel mesophilic bacterial strain, designated A-1, was isolated from microbially contaminated biopolymer microcapsules. The bacterium was able to withstand and grow in liquid cultures supplemented with the pyrethroid cypermethrin in concentrations up to 400 mg L−1. Furthermore, strain A-1 could use cypermethrin as sole carbon source and could degrade >50% of it in 12 h. Based on phenotypic and chemotaxonomic characterization, and phylogenetic analysis of 16S rRNA gene sequence, the strain A-1 was identified as Methylobacterium sp., which is the first reported cypermethrin degrader of methylotrophic bacteria. A role for esterase activity in cypermethrin biodegradation was presumed. Therefore, the carboxylesterase gene mse1 was amplified from the Methylobacterium sp. strain A-1 genome and the resulting 1 kb amplicon cloned into E. coli. Sequence analysis of the mse1-DNA insert revealed an open reading frame of 633 bp encoding for a putative carboxylesterase of 210 amino acid residues with a predicted molecular mass of 22 kDa. The amino acid sequence of the deduced enzyme MsE1 with the catalytic triad Ser106, Asp156, and His187 was found to be similar to that of α/β-hydrolase fold proteins. The active site Ser106 residue is located in the consensus pentapeptide motif Gly-X-Ser-X-Gly that is typical of esterases. [ABSTRACT FROM AUTHOR]

Emission factors (EFs) of particulate matter with aerodynamic diameter ≤10 µm (PM10) from the open burning/open detonation (OB/OD) of energetic materials were measured using a hybrid-optical remote sensing (hybrid-ORS) method. This method is based on the measurement of range-resolved PM backscattering values with a micropulse light detection and ranging (LIDAR; MPL) device. Field measurements were completed during March 2010 at Tooele Army Depot, Utah, which is an arid continental site. PM10EFs were quantified for OB of M1 propellant and OD of 2,4,6-trinitrotoluene (TNT). EFs from this study are compared with previous OB/OD measurements reported in the literature that have been determined with point measurements either in enclosed or ambient environments, and with concurrent airborne point measurements. PM10mass EFs, determined with the hybrid-ORS method, were 7.8 × 10−3kg PM10/kg M1 from OB of M1 propellant, and 0.20 kg PM10/kg TNT from OD of TNT. Compared with previous results reported in the literature, the hybrid-ORS method EFs were 13% larger for OB and 174% larger for OD. Compared with the concurrent airborne measurements, EF values from the hybrid-ORS method were 37% larger for OB and 54% larger for OD. For TNT, no statistically significant differences were observed for the EFs measured during the detonation of 22.7 and 45.4 kg of TNT, supporting that the total amount of detonated mass in this mass range does not have an effect on the EFs for OD of TNT. [ABSTRACT FROM AUTHOR]

The article presents a study which proposes a method to identify where military training and testing of particulate matter (PM) emissions can be conducted with minimal impact on residential development. It considers how complaints from projected civilian residential developments concerning military PM emissions hinder the sustainability of military training and testing activities. Thus, the proposed predictive method measures the level of future human annoyance caused by military PM sources.

Presents information on a study which investigated the involvement of the plasma and tissue kallikrein-kinin systems during activation of the contact system by cardiopulmonary bypass. Methodology; Results and discussion.

Discusses the homologous domains comprising the secretory leucoprotease inhibitor (SLPI) and the function of the N-terminal domain. Inhibition of elastase and alpha-chymotrypsin; Effects of heparin on the binding of HLE with SLPI and cSLPI; Inhibition by elafin.

Examines the inhibitory effects of polyanions on human leukocytes elastase (HLE) by secretory leukoprotease inhibitor (SLPI). Effects of glycosaminoglycans other than heparin on HLE inhibition by Met(O)-SLPI; Accelerated association of oxidized SLPI and HLE revealed in the kinetic analysis; Role of SLPI in elastase inhibitory function in the lungs.

A full-length cDNA encoding human salivary-gland preprokallikrein was inserted into the baculovirus Autographa californica nuclear polyhedrosis virus downstream of the polyhedrin promoter. The gene was expressed in transfected Spodoptera frugiperda cells and the recombinant product secreted into the culture medium. By alternating anion-exchange chromatography and gel-filtration steps, twice repeated, prokallikrein was purified to homogeneity, which was confirmed by amino acid analysis and N-terminal sequence determination. The prepropeptide was processed correctly, including the emoval of the signal peptide. The resulting proenzyme was found to be glycosylated, had a molecular mass of 35 kDa and an isoelectric point of 4.6. The yield of purified recombinant protein reached a level of 5 mg/l insect cell culture. After trypsin sigestion of prokallikrein, the biological activity of the released kallikrein was demonstrated by its specific amidase, esterase and kininogenase activity. The expression and purification of prokallikrein, as described here, offers the opportunity to study the proenzyme activation through protein engineering techniques in detail. [ABSTRACT FROM AUTHOR]

Emission factors (EFs) of particulate matter with aerodynamic diameter <10 microm (PM10) from the open burning/open detonation (OB/OD) of energetic materials were measured using a hybrid-optical remote sensing (hybrid-ORS) method. This method is based on the measurement of range-resolved PM backscattering values with a micropulse light detection and ranging (LIDAR; MPL) device. Field measurements were completed during March 2010 at Tooele Army Depot, Utah, which is an arid continental site. PM10 EFs were quantified for OB of M1 propellant and OD of 2,4,6-trinitrotoluene (TNT). EFs from this study are compared with previous OB/OD measurements reported in the literature that have been determined with point measurements either in enclosed or ambient environments, and with concurrent airborne point measurements. PM10 mass EFs, determined with the hybrid-ORS method, were 7.8 x 10(-3) kg PM10/kg M1 from OB of M1 propellant, and 0.20 kg PM10/kg TNT from OD of TNT. Compared with previous results reported in the literature, the hybrid-ORS method EFs were 13% larger for OB and 174% larger for OD. Compared with the concurrent airborne measurements, EF values from the hybrid-ORS method were 37% larger for OB and 54% larger for OD. For TNT, no statistically significant differences were observed for the EFs measured during the detonation of 22.7 and 45.4 kg of TNT, supporting that the total amount of detonated mass in this mass range does not have an effect on the EFs for OD of TNT.

Quantification of emissions of fugitive particulate matter (PM) into the atmosphere from military training operations is of interest by the United States Department of Defense. A new range-resolved optical remote sensing (ORS) method was developed to quantify fugitive PM emissions from puff sources (i.e., artillery back blasts), ground-level mobile sources (i.e., movement of tracked vehicles), and elevated mobile sources (i.e., airborne helicopters) in desert areas that are prone to generating fugitive dust plumes. Real-time, in situ mass concentration profiles for PM mass with particle diameters <10 μm (PM(10)) and <2.5 μm (PM(2.5)) were obtained across the dust plumes that were generated by these activities with this new method. Back blasts caused during artillery firing were characterized as a stationary short-term puff source whose plumes typically dispersed to <10 m above the ground with durations of 10-30 s. Fugitive PM emissions caused by artillery back blasts were related to the zone charge and ranged from 51 to 463 g PM/firing for PM(10) and 9 to 176 g PM/firing for PM(2.5). Movement of tracked vehicles and flying helicopters was characterized as mobile continuous sources whose plumes typically dispersed 30-50 m above the ground with durations of 100-200 s. Fugitive PM emissions caused by moving tracked vehicles ranged from 8.3 to 72.5 kg PM/km for PM(10) and 1.1 to 17.2 kg PM/km for PM(2.5), and there was no obvious correlation between PM emission and vehicle speed. The emission factor for the helicopter flying at 3 m above the ground ranged from 14.5 to 114.1 kg PM/km for PM(10) and 5.0 to 39.5 kg PM/km for PM(2.5), depending on the velocity of the helicopter and type of soil it flies over. Fugitive PM emissions by an airborne helicopter were correlated with helicopter speed for a particular soil type. The results from this range-resolved ORS method were also compared with the data obtained with another path-integrated ORS method and a Flux Tower method.

The emissions of particulate matter (PM) from anthropogenic sources raise public concern. A new method is described here that was developed to complete in situ rapid response measurements of PM mass emissions from fugitive dust sources by use of optical remote sensing (ORS) and an anemometer. The ORS system consists of one ground-based micropulse light detection and ranging (MPL) device that was mounted on a positioner, two open path-Fourier transform infrared (OP-FTIR) spectrometers, and two open path-laser transmissometers (OP-LT). An algorithm was formulated to compute PM light extinction profiles along each of the plume's cross sections that were determined with the MPL. Size-specific PM mass emission factors were then calculated by integrating the light extinction profiles with particle mass extinction efficiencies (determined with the OP-FTIRs/OP-LTs) and the wind's speed and direction. This method also quantifies the spatial and temporal variability of the plume's PM mass concentrations across each of the plume's cross sections. Example results from three field studies are also described to demonstrate how this new method is used to determine mass emission factors as well as characterize the dust plumes' horizontal and vertical dimensions and temporal variability of the PM's mass concentration.

The United States Environmental Protection Agency (USEPA) developed Method 9 to describe how plume opacity can be quantified by humans. However, use of observations by humans introduces subjectivity, and is expensive due to semiannual certification requirements of the observers. The Digital Opacity Method (DOM) was developed to quantify plume opacity at lower cost, with improved objectivity, and to provide a digital record. Photographs of plumes were taken with a calibrated digital camera under specified conditions. Pixel values from those photographs were then interpreted to quantify the plume's opacity using a contrast model and a transmission model. The contrast model determines plume opacity based on pixel values that are related to the change in contrast between two backgrounds that are located behind and next to the plume. The transmission model determines the plume's opacity based on pixel values that are related to radiances from the plume and its background. DOM was field tested with a smoke generator. The individual and average opacity errors of DOM were within the USEPA Method 9 acceptable error limits for both field campaigns. Such results are encouraging and support the use of DOM as an alternative to Method 9.