Search

This text investigates the bending/buckling behavior of multi-layer asymmetric/symmetric annular and circular graphene plates through the application of the nonlocal strain gradient model. Additionally, the static analysis of multi-sector nanoplates is addressed. By considering the van der Waals interactions among the layers, the higher-order shear deformation theory (HSDT), and the nonlocal strain gradient theory, the equilibrium equations are formulated in terms of generalized displacements and rotations. The mathematical nonlinear equations are solved utilizing either the semi-analytical polynomial method (SAPM) and the differential quadrature method (DQM). Also, the available references are used to validate the results. Investigations are conducted to examine the effect of small-scale factors, the van der Waals interaction value among the layers, boundary conditions, and geometric factors. [ABSTRACT FROM AUTHOR]

This article presents research into the feasibility of applying a nonlinear damper of a new conceptual structure. The key component of the damper is a circular membrane with slits that can move in a cylinder filled with viscous fluid. When an external load is applied to the damper, the membrane deforms, opening the slits. The flow of viscous fluid through the slits generates a damping force. The phenomenological model of the damper is based on the notion that the slit membrane moves according to the fundamental axisymmetric vibration mode of a circular membrane. The slit membrane blocks the entire radius of the pipe in the state of equilibrium when all slits are closed. As the membrane moves, the opening area of the slits varies depending on its deformation. This gives a nonlinear damping characteristic. The damping constant depends on the input displacement and velocity, which is the reason for the nonlinearity of the damping characteristic. From the phenomenological model, the nonlinear characteristic of the drag force is obtained. The performance of the damper is simulated using a mass–spring–damper system. Two cases of harmonic excitation and impulse excitation are analyzed. The results show that, using the slit membrane damper, the suppression of dynamic loads is more effective compared to a conventional linear damper. [ABSTRACT FROM AUTHOR]

Typically, polymer composites and ceramics are used to create biosensors. Materials with properties that are ideal for biosensors and chemical sensors include AgNO3 (silver nitrate), PVDF (polyvinylidene fluoride), and HA (hydroxyapatite). Polyvinylidene fluoride (PVDF) polymer has been widely used in several applications because of its well-known superior ferroelectric characteristics and biocompatibility. The brittleness and low bending strength of hydroxyapatite limit its applicability. Several HA and polymer composite formulations have been developed to compensate for HA's mechanical weakness. The final product contains a significant amount of HA, making HA/polymer composites highly biocompatible. When the right amount of silver is deposited, the maximum piezoelectric activity is generated, and silver nitrate has antimicrobial properties. The non-toxic solvent DMSO (dimethyl sulfoxide) and the solvent casting method were chosen for the preparation of the film. Surface roughness was chosen to measure the Str and Sdr properties of the thin film. For liquid preparation, the multifractal spectra analysis was chosen for each sample. SEM was used to examine the samples morphologically. EDX and mapping analyses were presented for chemistry distribution in the samples. [ABSTRACT FROM AUTHOR]

Today, microfluidics has become a revolutionary interdisciplinary topic with considerable attention in a wide range of biotechnology applications. In this research work, a numerical investigation of a microfluidic micromixer is carried out using a hybrid actuation approach with different micropillar shapes and gaps. For this purpose, COMSOL Multiphysics v.5.2. is used with three different physics, such as thermoviscous acoustic physics to solve acoustic governing equations, laminar physics to solve fluid flow governing equations, and diluted transport species to solve mixing governing equations. The simulations were carried out at different Reynolds numbers such as 2, 4, 6, 8, 10, and 12 with an oscillation frequency of 15 kHz. The results were in the form of acoustic characteristics such as acoustic pressure, acoustic velocity, acoustic stream, mixing index, and fluid flow behaviour at various Reynolds numbers. The results revealed that the inclusion of micropillars improved the mixing performance and strength of the acoustic field, resulting in an improvement of the mixing performance compared to the case without micropillars. In addition, the mixing performance is also investigated at different Reynolds numbers, and a higher mixing index is investigated at lower Reynolds numbers. Moreover, it was also investigated that blade-shaped micropillars with 0.150 mm gaps deliver the best results compared to the other cases, and the maximum and minimum values of the mixing index are 0.97 and 0.72, respectively, at Reynolds number 2. The main reason behind this larger mixing index at low Reynolds numbers is due to the inclusion of micropillars that enhance the diffusion rate and contact area, leading to the homogenisation of the heterogeneous fluids in the microchamber. The obtained results can be extremely helpful for the design and modifications of a hybrid microfluidics micromixer. [ABSTRACT FROM AUTHOR]

Recently, tissue engineering has been revolutionised by the development of 3D-printed scaffolds, which allow one to construct a precise architecture with tailored properties. In this study, three different composite materials were synthesised using a combination of polylactic acid (PLA), polyhydroxyalkanoates (PHA), poly(3-hydroxybutyrate) (PHB) and hydroxyapatite (HA) in varying weight percentages. Morphological properties were evaluated by scanning electron microscopy showing a uniform distribution of HA particles throughout the matrix, indicating good compatibility between the materials. Furthermore, the printed scaffolds were tested under pressure using a load cell to examine mechanical strength. Scanning electron microscopy (SEM) analysis showed favorable dispersion, biological compatibility together with enhanced bioactivity within the PHB/PHA/PLA/HA composite matrixes. Thus, this paper demonstrates the successful design and implementation of these composite structures for tissue-engineering applications and highlights the effective development of biocompatible scaffold designs with improved functionality. [ABSTRACT FROM AUTHOR]

The use of knitted structure pressure sensors in wearable applications and health monitoring systems has attracted a great deal of attention. This study aims to assess the single jersey and double jersey knitted structures as well as the electromechanical characteristics of electrically conductive yarns (ECY). The knitted structures were made with two different types of electrically conductive yarn, including the (i) fully drawn yarn (FDY) and the (ii) drawn textured yarn (DTY). FDY had higher tensile strength than DTY in reference to their drawing and twisting processes. Based on the results in terms of tensile strength, conductive yarns of 280D-FDY and SPFX25070-FX were chosen from seven available conductive yarns for the further production of knitted structures. Additionally, the knittability of the conductive yarn was also considered. Due to the knit-tuck stitch assembly, which increases the thickness of the structure, it was found that the double Lacoste, popcorn, and milano ribs had the necessary compression resistance. The compression properties of the knitted structures were tested using the kawabata evaluation system (KES FB-03). It was found that the recommended knitted structure sensing technology can be easily expanded into a scalable and affordable solution for the production of smart socks and related applications. [ABSTRACT FROM AUTHOR]

Photovoltaic systems, such as dye-sensitized solar cells (DSSCs), are one of the useful tools for generating renewable and green energy. To develop this technology, obstacles such as cost and the use of expensive compounds must be overcome. Here, we employed a new MoS2/graphene hybrid or composite instead of platinum in the DSSCs. Furthermore, the correctness of the preparation of the MoS2/graphene hybrid or composite was evaluated by field emission scanning electron microscope (FESEM), and the results showed that the desired compound was synthesized correctly. Inexpensive organic dyes were used to prepare the DSSCs, and their chemical structure was investigated by density functional theory (DFT) and cyclic voltammetry (CV). Finally, the DSSCs were fabricated using MoS2/graphene composite or hybrid, and to compare the results, the DSSCs were also prepared using platinum. Under the same conditions, the DSSCs with MoS2/graphene composite illustrated better efficiency than MoS2/graphene hybrid or/and graphene. [ABSTRACT FROM AUTHOR]

Corrosion is a harmful processes which by definition is a chemical or electrochemical reaction between a substance (usually a metal) and the environment which leads to a change in the properties of the substance and has destructive effects. In this study, new composites consisting of Al/WS2/ZnTerp-2TH with 5 and 10 wt.% ZnTerp-2TH were prepared and the results were fully compared. Al/WS2 played the role of matrix and ZnTerp-2TH played the role of reinforcement. In other words, as a novelty to prevent the corrosion of Al/WS2, ZnTerp-2TH is designed and synthesized and showed good results when the corrosion ratio was reduced by the existence of ZnTerp-2TH. Furthermore, the NMR and mass analysis of ZnTerp-2TH were carried out, and the thermal properties, X-ray diffraction, Fourier-transform infrared (FTIR) spectroscopy, morphology, energy-dispersive X-ray spectroscopy (EDX) analysis and corrosion behavior of the composites were also discussed in detail. The crystal size values of composites were calculated by the modified Scherrer method 34, 26 and 27 nm for Al/WS2, Al/WS2/5 wt.% ZnTerp-2TH and Al/WS2/10 wt.% ZnTerp-2TH, respectively. The microstructural examination of the specimens showed that the reinforcing phase (ZnTerp-2TH) has a favorable distribution on the surface of Al/WS2 when it covers the cracks and holes. In addition, the corrosion investigation results showed that the addition of ZnTerp-2TH to Al/WS2 can improve the corrosion resistance when the Ecorr and Icorr values of Al/WS2/10 wt.% ZnTerp-2TH were recorded in tandem −724 mV/decade and 5 uA cm−2. [ABSTRACT FROM AUTHOR]

This article presents the nonlinear investigation of the thermal and mechanical buckling of orthotropic annular/circular single-layer/bilayer nanoplate with the Pasternak and Winkler elastic foundations based on the nonlocal strain gradient theory. The stability equations of the graphene plate are derived using higher-order shear deformation theory (HSDT) and first-order shear deformation theory (FSDT) considering nonlinear von Karman strains. Furthermore, this paper analyses the nonlinear thermal and mechanical buckling of the orthotropic bilayer annular/circular nanoplate. HSDT provides an appropriate distribution for shear stress in the thickness direction, removes the limitation of the FSDT, and provides proper precision without using a shear correction coefficient. To solve the stability equations, the differential quadratic method (DQM) is employed. Additionally, for validation, the results are checked with available papers. The effects of strain gradient coefficient, nonlocal parameter, boundary conditions, elastic foundations, and geometric dimensions are studied on the results of the nondimensional buckling loads. Finally, an equation is proposed in which the thermal buckling results can be obtained from mechanical results (or vice versa). [ABSTRACT FROM AUTHOR]

Much attention has been paid to the surface modification of artificial skin barriers for the treatment of skin tissue damage. Chitosan is one of the natural materials that could be characterized by its biocompatibility. A number of methods for the preparation of chitosan membranes have been described in scientific articles, including solvent casting methods. This study investigates an improved technology to produce chitosan membranes. Thus, chitosan membranes were prepared using a vibration-assisted solvent casting method. First, aqueous acetic acid was used to pretreat chitosan. Then, free-standing chitosan membranes were prepared by solvent casting on nanoporous anodized aluminum oxide (AAO) membrane templates, allowing for the solvent to evaporate. Using finite element methods, a study was obtained showing the influence of chitosan solutions of different concentrations on the fluid flow into nanopores using high-frequency excitation. The height of the nanopillars and the surface area of the chitosan membrane were also evaluated. In this study, the surface area of the chitosan membrane was found to increase by 15, 10 and 6 times compared to the original flat surface area. The newly produced nanopillared chitosan membranes will be applicable in the fabrication of skin barriers due to the longer nanopillars on their surface and the larger surface area. [ABSTRACT FROM AUTHOR]

A nonlinear static analysis of a circular/annular nanoplate on the Winkler–Pasternak elastic foundation based on the nonlocal strain gradient theory is presented in the paper. The governing equations of the graphene plate are derived using first-order shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT) with nonlinear von Karman strains. The article analyses a bilayer circular/annular nanoplate on the Winkler–Pasternak elastic foundation. HSDT while providing a suitable distribution of shear stress along the thickness of the FSDT plate, eliminating the defects of the FSDT and providing good accuracy without using a shear correction factor. To solve the governing equations of the present study, the differential quadratic method (DQM) has been used. Moreover, to validate numerical solutions, the results were compared with the results from other papers. Finally, the effect of the nonlocal coefficient, strain gradient parameter, geometric dimensions, boundary conditions, and foundation elasticity on maximum non-dimensional deflection are investigated. In addition, the deflection results obtained by HSDT have been compared with the results of FSDT, and the importance of using higher-order models has been investigated. From the results, it can be observed that both strain gradient and nonlocal parameters have significant effects on reducing or increasing the dimensionless maximum deflection of the nanoplate. In addition, it is observed that by increasing load values, the importance of considering both strain gradient and nonlocal coefficients in the bending analysis of nanoplates is highlighted. Furthermore, replacing a bilayer nanoplate (considering van der Waals forces between layers) with a single-layer nanoplate (which has the same equivalent thickness as the bilayer nanoplate) is not possible when attempting to obtain exact deflection results, especially when reducing the stiffness of elastic foundations (or in higher bending loads). In addition, the single-layer nanoplate underestimates the deflection results compared to the bilayer nanoplate. Because performing the experiment at the nanoscale is difficult and molecular dynamics simulation is also time-consuming, the potential application of the present study can be expected for the analysis, design, and development of nanoscale devices, such as circular gate transistors, etc. [ABSTRACT FROM AUTHOR]

In this study, new composites based on polyvinylidene fluoride (PVDF) were ornamented and prepared with hydroxyapatite (HA) and silver nitride (AgNO3). Taking into account the polarity of the solvent dimethyl sulfoxide, this solvent was used to disperse the particles. The aim of using DMSO was to create amorphous phases and the strong dipoles of the C–F bond to reduce the energy barrier and improve the electrical properties. The PVDF played the role of matrix in HA, and AgNO3 was used as reinforcing elements. X-ray diffraction of the samples directly showed the amorphous phase and mixed amorphous and crystalline phases when all three materials were used simultaneously for preparing the composite. The scanning electron microscopy (SEM) images of the samples confirmed the role of PVDF, HA, and AgNO3. Furthermore, the energy dispersive X-ray (EDX) analysis was performed and proved that the HA structure did not change when the ratio of Ca P was equal to the ratio of natural HA. The electrical properties were investigated, and the amount of energy ranged from 56.50 to 125.20 mV. The final results showed that a designed device consisting of an active layer made of 0.1 g HA:0.5 g PVDF showed the highest energy barrier, the highest polarity, and surface energy, thus proving its relevance as potential material for energy harvesting applications. [ABSTRACT FROM AUTHOR]

In this paper, a novel nanocrystalline composite material of hydroxyapatite (HA)/polyvinyltrimethoxysilane (PVTMS)/iron(II)chloride tetrahydrate (Cl2FeH8-O4) with hexagonal structure is proposed for the fabrication of a gas/temperature sensor. Taking into account the sensitivity of HA to high temperatures, to prevent the collapse and breakdown of bonds and the leakage of volatiles without damaging the composite structure, a freeze-drying machine is designed and fabricated. X-ray diffraction, FTIR, SEM, EDAX, TEM, absorption and photoluminescence analyses of composite are studied. XRD is used to confirm the material structure and the crystallite size of the composite is calculated by the Monshi–Scherrer method, and a value of 81.60 ± 0.06 nm is obtained. The influence of the oxygen environment on the absorption and photoluminescence measurements of the composite and the influence of vaporized ethanol, N2 and CO on the SiO2/composite/Ag sensor device are investigated. The sensor with a 30 nm-thick layer of composite shows the highest response to vaporized ethanol, N2 and ambient CO. Overall, the composite and sensor exhibit a good selectivity to oxygen, vaporized ethanol, N2 and CO environments. [ABSTRACT FROM AUTHOR]

Nanoporous anodic aluminum oxide (AAO) is needed for a variety of purposes due to its unique properties, including high hardness, thermal stability, large surface area, and light weight. Nevertheless, the use of AAO in different applications is limited because of its brittleness. A new design of an electrochemical reactor with a vibrating element for AAO nanoporous membranes fabrication is proposed. The vibrating element in the form of a piezoceramic ring was installed inside the developed reactor, which allows to create a high-frequency excitation. Furthermore, mixing and vibration simulations in the novel reactor were carried out using ANSYS 17 and COMSOL Multiphysics 5.4 software, respectively. By theoretical calculations, the possibility to excite the vibrations of five resonant modes at different frequencies in the AAO membrane was shown. The theoretical results were experimentally confirmed. Five vibration modes at close to the theoretical frequencies were obtained in the novel reactor. Moreover, nanoporous AAO membranes were synthesized. The novel aluminum anodization technology results in AAO membranes with 82.6 ± 10 nm pore diameters and 43% porosity at 3.1 kHz frequency excitation and AAO membranes with 86.1 ± 10 nm pore diameters and 46% porosity at 4.1 kHz frequency excitation. Furthermore, the chemical composition of the membrane remained unchanged, and the hardness decreased. Nanoporous AAO has become less brittle but hard enough to be used for template synthesis. [ABSTRACT FROM AUTHOR]

Modern day industries are highly focused on the development of bio-inspired hybrid natural fiber composites for lightweight biosensor chips, automobile, and microfluidic applications. In the present research, the mechanical properties and morphological characteristics of alkaline (NaOH)-treated hemp, flax, noil hemp, and noil flax fiber-reinforced ecopoxy biocomposites were investigated. The samples were fabricated by employing the hand layup technique followed by the compression molding process. A total of two sets of composites with various weight fractions were fabricated. The samples were tested for mechanical properties such as flexural strength, interlaminar shear strength, moisture absorption, and contact angle measurement. The treated fibers were analyzed by using an optical microscope and Fourier transform infrared spectrometer (FTIR). The morphological characteristics, such as porosity and fracture mechanisms, were investigated by using scanning electron microscopy and SEM−EDX spectroscopy. The results revealed that the flexural properties of hybrid composites vary from 22.62 MPa to 30.04 MPa for hemp and flax fibers and 21.86 MPa to 24.70 MPa for noil fibers, whereas in individual fiber composites, the strength varies from 17.11 MPa to 21.54 MPa for hemp and flax fibers and 15.83 MPa to 18.79 MPa for noil fibers. A similar trend was observed in interlaminar shear properties in both cases. From moisture analysis, the rate of absorption is increased with time up to 144 h and remains constant in both cases. The moisture gain was observed more in individual composites than hybrid composites in both cases. Hence, the impact of hybridization was observed clearly in both cases. Also, hybrid composites showed improved properties compared to individual fiber composites. [ABSTRACT FROM AUTHOR]

Polymeric microstructures and microchannels are widely used in biomedical devices, optics, microfluidics and fiber optics. The quality, the shape, the spacing and the curvature of microstructure gratings are influenced by different mechanisms and fabrication techniques used. This paper demonstrates a cost-effective way for patterning high-aspect-ratio thermoplastic microstructures using thermal imprint technology and finite element modeling. Polymeric materials polypropylene (PP), polyethylene terephthalate glycol (PETG), polyvinyl chloride (PVC) and styrene-acrylonitrile (SAN) were chosen for the experimental investigations. A finite element model was constructed to define the most suitable parameters (time, heating temperature, pressure, etc.) for the formation of microstructures using the thermal imprint procedure. To confirm the relevance of the finite element model, different types of PP, PETG, PVC and SAN microstructures were fabricated using theoretically defined parameters. Experimental investigations of imprinted microstructures' morphological and optical properties were performed using scanning electron microscopy, atomic force microscopy and a diffractometer. Obtained results confirmed the relevance of the created finite element model which was applied in the formation of high-aspect-ratio microstructures. Application of this model in thermal imprint would not only reduce the fabrication time, but also would highly increase the surface quality and optical properties of the formed structures. [ABSTRACT FROM AUTHOR]

Mg-based alloys have several suitable properties for biomaterials, but they have major problems of being less antibacterial and have a low mechanical strength. To solve these problems, a new combination of Ag/Zn/Mg was prepared in this study, where the presence of Zn and Ag can help to increase the bioactivity. The use of 5 wt.% polymers consisting of PolyCaproLactone (PCL), PolyHydroxyButyrate (PHB) and PolyVinylTriMethoxySilane (PVTMS) is also investigated. DSC, XRD, TEM, FTIR, SEM, and EDAX analysis, as well as mechanical and bioactive behavior, were investigated to characterize the prepared composites. In the comparison, the best behavior was found when PHB was used. The results show that the strength values ranged from ~201 to 261 MPa. [ABSTRACT FROM AUTHOR]

The impact of matrix material on the mechanical properties of natural-fiber-reinforced hybrid composites was studied by comparing their experimental, and numerical analysis results. In the present work hemp and flax fibers were used as reinforcement and epoxy resin and ecopoxy resin along with hardener were used as matrix materials. To study the influence of the matrix material, two sets of hybrid composites were fabricated by varying the matrix material. The composite samples were fabricated by using the compression-molding technique followed by a hand layup process. A total of five different composites were fabricated by varying the weight fraction of fiber material in each set based on the rule of the hybridization process. After fabrication, the mechanical properties of the composite samples were tested and morphological studies were analyzed by using SEM-EDX analysis. The flexural-test fractured specimens were analyzed by using a scanning electron microscope (SEM). In addition, theoretical analysis of the elastic properties of hybrid composites was carried out by using the Halpin–Tsai approach. The results showed that the hybrid composites had superior properties to individual fiber composites. Overall, epoxy resin matrix composites exhibited superior properties to ecopoxy matrix composites. [ABSTRACT FROM AUTHOR]

The paper is dedicated to analysis, practical exploitation of sonotrode, whose fundament is multilayer actuator in experiments of mechanical hot imprint. The goal is to compare the quality of microstructures, created by using vibration based on multilayer actuator. Numerical modelling and experimental analysis is performed in order to find resonant frequency of the sonotrode. Having operating frequency, sonotrode applied in mechanical hot imprint process. Microstructures are created on the surface of polycarbonate; the only process variable is vibration. Two types of microstructure quality measurements are performed: measurement of diffraction efficiency, optical microscopy in order to examine quality of replica. [ABSTRACT FROM AUTHOR]

The aim of this paper is to propose a novel structure glucose sensor which makes glucose level measurement system more convenient, increases measurement accuracy and gets the sensor that can be manufactured applying cheap manufacture processes. The main focus is made on the design of viscoelastic cantilever type sensors with the embedded piezo-active functional element to drive micro cantilever in order to detect concentration of glucose in the physiological liquid. Analytical, numerical and experimental methods for design and analysis of viscoelastic sensor are presented. [ABSTRACT FROM AUTHOR]

The main aim of this paper is to create nanoporouse aluminium oxide membrane which could be used as vibroactive nanofilter in biomedical micro hydraulic devices. This research paper covers the experimental setup of nanoporouse aluminium oxide membrane fabrication and the investigations of its chemical and surface properties. A custom-made anodization experimental setup was used to form membrane with hexagonal pores of 70 nm diameter and 110 nm interpore distance. [ABSTRACT FROM AUTHOR]

This paper proposes an approach for designing an efficient vibration energy harvester based on a vibro-impacting piezoelectric microcantilever with a geometric shape that has been rationally modified in accordance with results of dynamic optimization. The design goal is to increase the amplitudes of higher-order vibration modes induced during the vibro-impact response of the piezoelectric transducer, thereby providing a means to improve the energy conversion efficiency and power output. A rational configuration of the energy harvester is proposed and it is demonstrated that the new design retains essential modal characteristics of the optimal microcantilever structures, further providing the added benefit of less costly fabrication. The effects of structural dynamics associated with advantageous exploitation of higher vibration modes are analyzed experimentally by means of laser vibrometry as well as numerically via transient simulations of microcantilever response to random excitation. Electrical characterization results indicate that the proposed harvester outperforms its conventional counterpart (based on the microcantilever of the constant cross-section) in terms of generated electrical output. Reported results may serve for the development of impact-type micropower generators with harvesting performance that is enhanced by virtue of self-excitation of large intensity higher-order mode responses when the piezoelectric transducer is subjected to relatively low-frequency excitation with strongly variable vibration magnitudes. [ABSTRACT FROM AUTHOR]

With increasing technical requirements in the design of microresonators, the development of new techniques for lightweight, simple, and inexpensive components becomes relevant. Lead zirconate titanate (PZT) is a powerful tool in the formation of these components, allowing a self-actuation or self-sensing capability. Different fabrication methods lead to the variation of the properties of the device itself. This research paper covers the fabrication of a novel PZT film and the investigations of its chemical, surface, and dynamic properties when film thickness is varied. A screen-printing technique was used for the formation of smooth films of 60 μm, 68 μm, and 25 μm thickness. A custom-made poling technique was applied to enhance the piezoelectric properties of the designed films. However, poling did not change any compositional or surface characteristics of the films; changes were only seen in the electrical ones. The results showed that a thinner poled PZT film having a chemical composition with the highest amount of copper and zirconium led to better electrical characteristics (generated voltage of 3.5 mV). [ABSTRACT FROM AUTHOR]

A novel cantilever type piezoelectric sensing element was developed. Cost-effective and simple fabrication design allows the use of this element for various applications in the areas of biomedicine, pharmacy, environmental analysis and biosensing. This paper proposes a novel piezoelectric composite material whose basic element is PZT and a sensing platform where this material was integrated. Results showed that a designed novel cantilever-type element is able to generate a voltage of up to 80 μV at 50 Hz frequency. To use this element for sensing purposes, a four micron periodical microstructure was imprinted. Silver nanoparticles were precipitated on the grating to increase the sensitivity of the designed element, i.e., Surface Plasmon Resonance (SPR) effect appears in the element. To tackle some issues (a lack of sensitivity, signal delays) the element must have certain electronic and optical properties. One possible solution, proposed in this paper, is a combination of piezoelectricity and SPR in a single element. [ABSTRACT FROM AUTHOR]

This paper focuses on several aspects extending the dynamical efficiency of a cantilever beam vibrating in the third mode. A few ways of producing this mode stimulation, namely vibro-impact or forced excitation, as well as its application for energy harvesting devices are proposed. The paper presents numerical and experimental analyses of novel structural dynamics effects along with an optimal configuration of the cantilever beam. The peculiarities of a cantilever beam vibrating in the third mode are related to the significant increase of the level of deformations capable of extracting significant additional amounts of energy compared to the conventional harvester vibrating in the first mode. Two types of a piezoelectric vibrating energy harvester (PVEH) prototype are analysed in this paper: the first one without electrode segmentation, while the second is segmented using electrode segmentation at the strain nodes of the third vibration mode to achieve effective operation at the third resonant frequency. The results of this research revealed that the voltage generated by any segment of the segmented PVEH prototype excited at the third resonant frequency demonstrated a 3.4-4.8-fold increase in comparison with the non-segmented prototype. Simultaneously, the efficiency of the energy harvester prototype also increased at lower resonant frequencies from 16% to 90%. The insights presented in the paper may serve for the development and fabrication of advanced piezoelectric energy harvesters which would be able to generate a considerably increased amount of electrical energy independently of the frequency of kinematical excitation. [ABSTRACT FROM AUTHOR]