Search

Describes a study that used a teaching strategy based on two teaching experiments which could facilitate students' conceptual understanding of electrochemistry. Involves two sections (n=29 and n=28) of 10th grade high school students in Venezuela. Concludes that the teaching experiments facilitated student understanding of electrochemistry. (Author/SOE)

A previous study of prospective teachers found that students from different countries and different levels of electrochemistry hold common misconceptions, indicating that concepts were presented to them poorly. Reports on how prospective teachers' scientifically incorrect ideas were used to form assertion-reason-type questions and how these questions were used to identify previously unreported conceptual difficulties related to these ignored concepts. (Author/MM)

Describes a concrete teaching model designed to eliminate students' misconceptions about current flow in electrochemistry. The model uses a semi-permeable membrane rather than a salt bridge to complete the circuit and demonstrate the maintenance of cell neutrality. Concludes that use of the model led to improvement in students' understanding at the high school and university levels. (Contains 27 references.) (WRM)

Investigates the effects of both computer animations of microscopic chemical processes occurring in a galvanic cell and conceptual-change instruction based on chemical demonstrations on students' conceptions of current flow in electrolyte solutions. Finds that conceptual change instruction was effective at dispelling student misconceptions but computer animations did not appear to affect student test responses. (Contains 36 references.) (Author/WRM)

Examines textbooks used in college-level chemistry courses for misleading or erroneous statements leading to student misconceptions about electrochemistry. (CCM)

Examines students' misconceptions and proposed mechanisms related to current flow in electrolyte solutions and the salt bridge. Confirms reported misconceptions and identifies several new ones. Discusses probable sources of misconceptions and some methods for preventing them. Contains 27 references. (JRH)

Describes a demonstration of the principles of a voltaic cell using lemon cells to power a calculator and other items. A lemon fortified with a penny and a galvanized nail produces a potential of one volt. (PVD)

Current models to understand the reactivity of metal/aqueous interfaces in electrochemistry, e.g., volcano plots, are based on the adsorption free energies of reactants and products, which are often small hydrophobic molecules (such as in CO2 and N2 reduction). Calculations played a major role in the quantification and comprehension of these free energies in terms of the interactions that the reactive species form with the surface. However, solvation free energies also come into play in two ways: (i) by modulating the adsorption free energy together with solute–surface interactions, as the solute has to penetrate the water adlayer in contact with the surface and get partially desolvated (which costs free energy); (ii) by regulating transport across the interface, i.e., the free energy profile from the bulk to the interface, which is strongly non-monotonic due to the unique nature of metal/aqueous interfaces. Here, we use constant potential molecular dynamics to study the solvation contributions, and we uncover huge effects of the shape and orientation (on top of the already known size effect) of small hydrophobic and amphiphilic solutes on their adsorption free energy. We propose a minimal theoretical model, the S.O.S. model, that accounts for size, orientation, and shape effects. These novel aspects are rationalized by recasting the concepts at the base of the Lum–Chandler–Weeks theory of hydrophobic solvation (for small solutes in the so-called volume-dominated regime) into a layer-by-layer form, where the properties of each interfacial region close to the metal are explicitly taken into account. [ABSTRACT FROM AUTHOR]

Many applications involving plasma–liquid interactions depend on the reactive processes occurring at the plasma–liquid interface. We report on a falling liquid film plasma reactor allowing for in situ optical absorption measurements of the time-dependence of the ferricyanide/ferrocyanide redox reactivity, complemented with ex situ measurement of the decomposition of formate. We found excellent agreement between the measured decomposition percentages and the diffusion-limited decomposition of formate by interfacial plasma-enabled reactions, except at high pH in thin liquid films, indicating the involvement of previously unexplored plasma-induced liquid phase chemistry enabled by long-lived reactive species. We also determined that high pH facilitates a reduction-favoring environment in ferricyanide/ferrocyanide redox solutions. In situ conversion measurements of a 1:1 ferricyanide/ferrocyanide redox mixture exceed the measured ex situ conversion and show that conversion of a 1:1 ferricyanide/ferrocyanide mixture is strongly dependent on film thickness. We identified three dominant processes: reduction faster than ms time scales for film thicknesses >100 µm, •OH-driven oxidation on time scales of <10 ms, and reduction on 15 ms time scales for film thickness <100 µm. We attribute the slow reduction and larger formate decomposition at high pH to HO 2 − formed from plasma-produced H2O2 enabled by the high pH at the plasma–liquid interface as confirmed experimentally and by computed reaction rates of HO 2 − with ferricyanide. Overall, this work demonstrates the utility of liquid film reactors in enabling the discovery of new plasma-interfacial chemistry and the utility of atmospheric plasmas for electrodeless electrochemistry. [ABSTRACT FROM AUTHOR]

Enantio-discrimination and spin-dependent electrochemistry (SDE), as a manifestation of the chirality-induced spin selectivity (CISS) effect, are important phenomena that can be probed by "chiral" electrochemistry. Here, we prepared chiralized surfaces of gold and nickel, to serve as working electrodes, through effective chemisorption of enantiopure dimethyl-bis(ethylenedithio)-tetrathiafulvalene (DM-BEDT-TTF) 1, tetramethyl-bis(ethylenedithio)-tetrathiafulvalene (TM-BEDT-TTF) 2, and their capped silver nanoparticle (AgNPs) aggregate by simple incubation of the metallic substrates. The effective chemisorption was checked by means of ultrahigh vacuum x-ray photoelectron spectroscopy (XPS) and by electro-desorption experiments, i.e., cyclic voltammetry (CV) scans showing a first electro-desorption peak at about −1.0 V. The Au|1 and Au|2 chiral electrodes were successfully used in CV experiments exploiting chiral redox probes. Finally, the hybrid interfaces Ni|enantiopure 1 or 2|AgNPs served as working electrodes in SDE experiments. In particular, the hybrid chiral interfaces Ni|(R)-2|AgNPs and Ni|(S)-2|AgNPs exhibited a significant spin-filtering ability, as a manifestation of the CISS effect, with average spin polarization values of 15%. [ABSTRACT FROM AUTHOR]

Electron transfer in the electrode–solution interface is responsible for the signal in the electrochemical sensor. However, the Electrical Double-Layer (EDL) characteristic is usually ignored in signal modeling. Here, we constructed a model based on the reaction–diffusion equation to describe the dynamics in the EDL during sensing. With this model, many common experimental phenomena, such as transient/steady-state current variation or detection nonlinearization, can be unraveled by exploring the effects of position, kinetics proportionality coefficient (k), and reaction order (β). We also put forward some suggestions to improve the stability and linear detection range for future sensor design. [ABSTRACT FROM AUTHOR]

Fluorinated organic compounds (FOCs) represent a class of synthetic chemicals distinguished by their resilient carbon–fluorine bonds, which demonstrate an ability to withstand environmental degradation over an extended period. The integration of FOCs into cutting-edge applications, including lithium-ion batteries (LiBs), presents considerable potential for environmental harm that has not yet been sufficiently addressed. This study focuses on the environmental fate of two fluorinated aromatics, tris(pentafluorophenyl)borane (TPFPB) and tris(pentafluorophenyl)phosphine (TPFPP), given their important role in improving the performance of LiBs. To achieve this, laboratory simulation methods including total oxidizable precursor assay, electrochemistry (EC), Fenton reaction, UV-C irradiation, and hydrolysis were employed. Liquid chromatography and gas chromatography coupled with high-resolution mass spectrometry were used for identification of transformation products (TPs) and prediction of their molecular formulae. Despite the structural similarity between TPFPB and TPFPP, distinct differences in electrochemical behavior and degradation pathways were observed. TPFPB readily underwent hydroxylation and hydrolysis, resulting in a wide range of 49 TPs. A total of 28 TPs were newly identified, including oligomers and highly toxic dioxins. In contrast, TPFPP degraded exclusively under harsh conditions, requiring the development of innovative conditioning protocols for EC. In total, the simulation experiments yielded nine structurally different compounds, including seven previously undescribed, partially defluorinated TPs. This study highlights the potential risks associated with the use of FOCs in LiBs and provides insight into the complex environmental behavior of FOCs. [ABSTRACT FROM AUTHOR]

The production of hydrogen via green method is the need of the present time to overcome the world's energy demand. Several electrocatalysts were employed to study critical oxygen evolution process (OER), and, Hydrogen evolution process (HER), which are designed for water splitting to generate clean hydrogen fuel. Here, we used a low-cost approach to fabricate NiS/MoTe 2 , which resulted in increased catalytic activity for water splitting. The nanocomposite's unique structure provides a larger surface area of 94 m2 g−1, evaluated from BET technique, resulting in more active sites with enough charge transfer capacity and material stability over time. The composite material has a synergistic impact with improved active sites, resulting in a much-reduced overpotential of 274, and, 180 mV for OER, and, HER at 10 mA cm−2 current density, respectively. It also has a lower Tafel value of 48, and, 47 mV dec−1, indicating efficient charge transfer during OER process and high electrocatalytic activity on Nickel Foam electrode. Water electrolysis's enhanced efficiency is due to huge surface area, higher mass activity for 4 and 3.84 A g−1 for OER and HER, respectively. NiS/MoTe 2 has lower Rct of 219 mΩ and 36.2 Ω, and it shows conductivity of 0.0084, and, 0.0082 S m−1 for OER, and HER, respectively. The synthesized material has enhanced ionic conductivity of 0.0084 and 0.0082 S m−1 for OER, and HER, accordingly. This advancement has potential to simplify electron transfer and usher in a new age by providing an improved alternative for noble metal-based materials. [Display omitted] • A simple Hydrothermal approach for the synthesis of material was opted. • Electrocatalyst showcased smaller overpotentials of 274 and 180 mV, for OER and HER, respectively. • A smaller Tafel slope values of 48 and 47 mV/dec for OER and HER was observed, respectively. • The catalyst remained stable up to 50 h for both OER and HER. [ABSTRACT FROM AUTHOR]

Electrode materials based on zinc molybdenum oxides were designed by the saccharide-assisted sol-gel procedure for electrochemical hydrogen storage (EHS). By using different characterization methods to observe the formation of nanostructures, it was possible to determine that carbon texture was present on the nanostructured surfaces of zinc molybdenum oxides. The effects of employing various saccharides (mono, di, and poly saccharides) as carbon sources and fuel on the microstructure, electrochemical behaviors, and purity of synthesized samples were compared. The growth of nanocomposites including Zn 2 Mo 3 O 8 , ZnMo 8 O 10 , and Mo 8 O 23 phases was facilitated by the saccharide. A charge-discharge method was used to build three-electrode cells and expose them to galvanostatic cycling. To ascertain the stability of electrode architectures, cycling performance at various rates was carried out. The samples' hydrogen storage capabilities were examined, and the sample generated with glucose showed an optimum capacity about 1017 mAhg−1 after 15th cycle. • Saccharide assisted sol-gel synthesis of carbonous zinc molybdate nanocomposites as electrode materials. • Investigation of crystallinity, microstrain and structural parameters. • The assessment of hydrogen storage activity using comparative chronopotentiometry study. • Understanding of redox and physisorption-based efficient storage mechanisms. [ABSTRACT FROM AUTHOR]

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru1Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru1Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru1Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM−1 cm−2) and wider linear range (0.5–8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru1Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors. [ABSTRACT FROM AUTHOR]

Nanozymes are a class of nanomaterials with biocatalytic function and enzyme-like activity, whose advantages include high stability, low cost, and mass production. They can catalyze the substrates of natural enzymes based on specific nanostructures and serve as substitutes for natural enzymes. Their applied research involves a wide range of fields such as biomedicine, environmental governance, agriculture, and food. Molecular logic gates are a new cross-disciplinary discipline, which can simulate the function of silicon circuits on a molecular scale, perform single or multiple input logic operations, and generate logic outputs. A molecular logic gate is a binary operation that converts an input signal into an output signal according to the rules of Boolean logic, generating two signals, a high level, and a low level. The high and low levels represent the "true" and "false" values of the logic gates, and their outputs correspond to "l" and "0" of the molecular logic gates, respectively. The combination of nanozymes and logic gates is a novel and attractive research direction, and the cross-application of the two brings new opportunities and ideas for various fields, such as the construction of efficient biocomputers, intelligent drug delivery systems, and the precise diagnosis of diseases. This review describes the application of logic gates based on nanozymes, which is expected to provide a certain theoretical foundation for researchers' subsequent studies. [ABSTRACT FROM AUTHOR]

NASICON (Na Super Ionic CONductor) type materials are an important class of solid-state electrolytes due to their high ionic conductivity along with decent chemical and electrochemical stability. In this study, a medium-entropy Li 1.5 Zr 1.0 Sn 0.5 Al 0.5 (PO 4) 3 (LZSAP) ceramic electrolyte was prepared via a solid-state synthesis method. Rietveld refinement confirmed the rhombohedral structure of the conventionally sintered sample (LZSAP-CS) at 1000 °C. The spark plasma sintering (SPS) technique was used for the densification of the pellet and resulted in ∼2.64 times higher room temperature conductivity (∼4.42 × 10−5 S cm−1) than that of the LZSAP-CS. The activation energy, calculated in the 30–100 °C range, decreased from 0.37 ± 0.01 eV for LZSAP-CS to 0.31 ± 0.01 eV for spark plasma sintered LZSAP pellet. The transference number of Li+ was ∼0.98, indicating that Li+ is the predominant charge carrier in this electrolyte. Further investigation of the lithium metal-electrolyte interface was conducted using a symmetric Li|LZSAP-SPS|Li cell configuration, demonstrating stability for over 500 h at 5 μA cm−2. LZSAP extends the list of suitable solid-state electrolytes for all-solid-state lithium batteries. [Display omitted] [ABSTRACT FROM AUTHOR]

Anion exchange membrane fuel cells (AEMFCs) are advantageous for reducing or even eliminating the dependency on platinum resources, as the alkaline environment allows the use of non‐precious metal catalysts for oxygen reduction reaction at the cathode. However, the intrinsic activity of hydrogen oxidation reaction (HOR) catalysts in alkaline environments is 2 to 4 orders of magnitude lower than in acidic environments, which becomes the major challenge for AEMFCs. This review examines the current developments in the intrinsic activity of alkaline HOR catalysts and systematically summarizes the hydrogen activation mechanism with a focus on potential influencing factors and enhancement strategies. Furthermore, it offers insights into the prospects for developing more efficient alkaline HOR catalysts. [ABSTRACT FROM AUTHOR]

Electron transfers in multinuclear metal complexes are the origin of their unique functionalities both in natural and artificial systems. However, electron transfers in multinuclear metal complexes are generally complicated, and predicting and controlling these electron transfers is extremely difficult. Herein, we report the precise manipulation of the electron transfers in multinuclear metal complexes. The development of a rational synthetic strategy afforded a series of pentanuclear metal complexes which composed of metal ions and 3,5‐bis(2‐pyridyl)pyrazole (Hbpp) as a platform to probe the phenomena. Electrochemical and spectroscopic investigations clarified overall picture of the electron transfers in the pentanuclear complexes. In addition, unique electron transfer behaviors, in which the reduction of a metal center occurs during the oxidation of the overall complex, were identified. We also elucidated the two dominant factors that determine the manner of the electron transfers. Our results provide comprehensive guidelines for interpreting the complicated electron transfers in multinuclear metal complexes. [ABSTRACT FROM AUTHOR]

Understanding the nature of intermediates/active species in reactions is a major challenge in chemistry. This is because spectator species typically dominate the experimentally derived data and consequently active phase contributions are masked. Transient methods offer a means to bypass this difficulty. In particular, modulation excitation with phase‐sensitive detection (ME‐PSD) provides a mechanism to distinguish between spectator and reacting species. Herein, modulation excitation (ME) time‐resolved (energy dispersive) X‐ray absorption spectroscopy, assisted by phase sensitive detection (PSD) analysis, has been applied to the study of a liquid phase process; in this case the classic ferrocyanide/ferricyanide redox couple. Periodic switches of the electrical potential (anodic/cathodic) enabled the use of the ME approach. Structural changes at fractions as low as 2 % of the total number of electroactive species were detected within the X‐ray beam probe volume containing ~30 pmol of Fe(II)/Fe(III). [ABSTRACT FROM AUTHOR]

Molecularly imprinted polymers (MIPs) are artificial receptors equipped with selective recognition sites for target molecules. One of the most promising strategies for protein MIPs relies on the exploitation of short surface‐exposed protein fragments, termed epitopes, as templates to imprint binding sites in a polymer scaffold for a desired protein. However, the lack of high‐resolution structural data of flexible surface‐exposed regions challenges the selection of suitable epitopes. Here, we addressed this drawback by developing a polyscopoletin‐based MIP that recognizes recombinant proteins via imprinting of the widely used Strep‐tag II affinity peptide (Strep‐MIP). Electrochemistry, surface‐sensitive IR spectroscopy, and molecular dynamics simulations were employed to ensure an utmost control of the Strep‐MIP electrosynthesis. The functionality of this novel platform was verified with two Strep‐tagged enzymes: an O2‐tolerant [NiFe]‐hydrogenase, and an alkaline phosphatase. The enzymes preserved their biocatalytic activities after multiple utilization confirming the efficiency of Strep‐MIP as a general biocompatible platform to confine recombinant proteins for exploitation in biotechnology. [ABSTRACT FROM AUTHOR]