Search

Real-time chemical sensing is crucial for applications in environmental and health monitoring 1 . Biosensors can detect a variety of molecules through genetic circuits that use these chemicals to trigger the synthesis of a coloured protein, thereby producing an optical signal 2-4 . However, the process of protein expression limits the speed of this sensing to approximately half an hour, and optical signals are often difficult to detect in situ 5-8 . Here we combine synthetic biology and materials engineering to develop biosensors that produce electrical readouts and have detection times of minutes. We programmed Escherichia coli to produce an electrical current in response to specific chemicals using a modular, eight-component, synthetic electron transport chain. As designed, this strain produced current following exposure to thiosulfate, an anion that causes microbial blooms, within 2 min. This amperometric sensor was then modified to detect an endocrine disruptor. The incorporation of a protein switch into the synthetic pathway and encapsulation of the bacteria with conductive nanomaterials enabled the detection of the endocrine disruptor in urban waterway samples within 3 min. Our results provide design rules to sense various chemicals with mass-transport-limited detection times and a new platform for miniature, low-power bioelectronic sensors that safeguard ecological and human health., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

Quinolinic acid (QA) is a key intermediate of nicotinic acid (Niacin) which is an essential human nutrient and widely used in food and pharmaceutical industries. In this study, a quinolinic acid producer was constructed by employing comprehensive engineering strategies. Firstly, the quinolinic acid production was improved by deactivation of NadC (to block the consumption pathway), NadR (to eliminate the repression of L-aspartate oxidase and quinolinate synthase), and PtsG (to slow the glucose utilization rate and achieve a more balanced metabolism, and also to increase the availability of the precursor phosphoenolpyruvate). Further modifications to enhance quinolinic acid production were investigated by increasing the oxaloacetate pool through overproduction of phosphoenolpyruvate carboxylase and deactivation of acetate-producing pathway enzymes. Moreover, quinolinic acid production was accelerated by assembling NadB and NadA as an enzyme complex with the help of peptide-peptide interaction peptides RIAD and RIDD, which resulted in up to 3.7 g/L quinolinic acid being produced from 40 g/L glucose in shake-flask cultures. A quinolinic acid producer was constructed in this study, and these results lay a foundation for further engineering of microbial cell factories to efficiently produce quinolinic acid and subsequently convert this product to nicotinic acid for industrial applications., (Copyright © 2021 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.)

Recombination can be used in the laboratory to overcome component limitations in synthetic biology by creating enzymes that exhibit distinct activities and stabilities from native proteins. To investigate how recombination affects the properties of an oxidoreductase that transfers electrons in cells, we created ferredoxin (Fd) chimeras by recombining distantly related cyanobacterial and cyanomyophage Fds (53% identity) that present similar midpoint potentials but distinct thermostabilities. Fd chimeras having a wide range of amino acid substitutions retained the ability to coordinate an iron-sulfur cluster, although their thermostabilities varied with the fraction of residues inherited from each parent. The midpoint potentials of chimeric Fds also varied. However, all of the synthetic Fds exhibited midpoint potentials outside of the parental protein range. Each of the chimeric Fds could also support electron transfer between Fd-NADP reductase and sulfite reductase in Escherichia coli , although the chimeric Fds varied in the expression required for similar levels of cellular electron transfer. These results show how Fds can be diversified through recombination and reveal differences in the inheritance of thermostability and electrochemical properties. Furthermore, they illustrate how electron transfer efficiencies of chimeric Fds can be rapidly evaluated using a synthetic metabolic pathway.

Bioelectronics brings together the fields of biology and microelectronics to create multifunctional devices with the potential to address longstanding technological challenges and change our way of life. Microbial electrochemical devices are a growing subset of bioelectronic devices that incorporate naturally occurring or synthetically engineered microbes into electronic devices and have broad applications including energy harvesting, chemical production, water remediation, and environmental and health monitoring. The goal of this Viewpoint is to highlight recent advances and ongoing challenges in the rapidly developing field of microbial bioelectronic devices, with an emphasis on materials challenges. We provide an overview of microbial bioelectronic devices, discuss the biotic-abiotic interface in these devices, and then present recent advances and ongoing challenges in materials related to electron transfer across the abiotic-biotic interface, microbial adhesion, redox signaling, electronic amplification, and device miniaturization. We conclude with a summary and perspective of the field of microbial bioelectronics.

Mandibular reconstruction requires functional and aesthetic repair and is further complicated by contamination from oral and skin flora. Antibiotic-releasing porous space maintainers have been developed for the local release of vancomycin and to promote soft tissue attachment. In this study, mandibular defects in six sheep were inoculated with 10 6 colony forming units of Staphylococcus aureus; three sheep were implanted with unloaded porous space maintainers and three sheep were implanted with vancomycin-loaded space maintainers within the defect site. During the same surgery, 3D-printed in vivo bioreactors containing autograft or xenograft were implanted adjacent to rib periosteum. After 9 weeks, animals were euthanized, and tissues were analyzed. Antibiotic-loaded space maintainers were able to prevent dehiscence of soft tissue overlying the space maintainer, reduce local inflammatory cells, eliminate the persistence of pathogens, and prevent the increase in mandibular size compared to unloaded space maintainers in this sheep model. Animals with an untreated mandibular infection formed bony tissues with greater density and maturity within the distal bioreactors. Additionally, tissues grown in autograft-filled bioreactors had higher compressive moduli and higher maximum screw pull-out forces than xenograft-filled bioreactors. In summary, we demonstrated that antibiotic-releasing space maintainers are an innovative approach to preserve a robust soft tissue pocket while clearing infection, and that local infections can increase local and remote bone growth., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This study addressed the functionality of genetic circuits carrying natural regulatory elements of Clostridium acetobutylicum ATCC 824 in the presence of the respective inducer molecules. Specifically, promoters and their regulators involved in diverse carbon source utilization were characterized using mCherryOpt or beta-galactosidase as a reporter. Consequently, most of the genetic circuits tested in this study were functional in Clostridium acetobutylicum ATCC 824 in the presence of an inducer, leading to the expression of reporter proteins. These genetic sensor-regulators were found to be transferable to another Clostridium species, such as Clostridium beijerinckii NCIMB 8052. The gradual expression of reporter protein was observed as a function of the carbohydrates of interest. A xylose-inducible promoter allows a titratable and robust expression of a reporter protein with stringency and efficacy. This xylose-inducible circuit was seen to enable induction of the expression of reporter proteins in the presence of actual sugar mixtures incorporated in woody hydrolysate wherein glucose and xylose are present as predominant carbon sources.

Marine cyanobacteria are infected by phages whose genomes encode ferredoxin (Fd) electron carriers. These Fds are thought to redirect the energy harvested from light to phage-encoded oxidoreductases that enhance viral fitness, but it is unclear how the biophysical properties and partner specificities of phage Fds relate to those of photosynthetic organisms. Here, results of a bioinformatics analysis using a sequence similarity network revealed that phage Fds are most closely related to cyanobacterial Fds that transfer electrons from photosystems to oxidoreductases involved in nutrient assimilation. Structural analysis of myovirus P-SSM2 Fd (pssm2-Fd), which infects the cyanobacterium Prochlorococcus marinus , revealed high levels of similarity to cyanobacterial Fds (root mean square deviations of ≤0.5 Å). Additionally, pssm2-Fd exhibited a low midpoint reduction potential (-336 mV versus a standard hydrogen electrode), similar to other photosynthetic Fds, although it had lower thermostability ( T m = 28 °C) than did many other Fds. When expressed in an Escherichia coli strain deficient in sulfite assimilation, pssm2-Fd complemented bacterial growth when coexpressed with a P. marinus sulfite reductase, revealing that pssm2-Fd can transfer electrons to a host protein involved in nutrient assimilation. The high levels of structural similarity with cyanobacterial Fds and reactivity with a host sulfite reductase suggest that phage Fds evolved to transfer electrons to cyanobacterially encoded oxidoreductases., Competing Interests: Conflict of interest—The authors declare that they have no conflicts of interest with the contents of this article., (© 2020 Campbell et al.)

It is of great economic interest to produce succinate from low-grade carbon sources, which can make it more economically competitive against petrochemical-based succinate. Galactose sugars constitute a significant fraction of the soluble carbohydrate in a meal from agricultural sources which is considered a low value or waste byproduct of oilseed processing. To improve the galactose utilization, the effect of galR and glk on sugars uptake was investigated by deactivation of each gene in three previously engineered host strains. As expected, glk plays an important role in glucose uptake, while, the effect of deactivation of galR is highly dependent on the strength of the downstream module (succinate production module). A new succinate producer FZ661T was constructed by enhancement of the succinate producing module and manipulation of the gal operon. The succinate productivity reached 4.57 g/L/hr when a mixed sugar feedstock was used as a carbon source in shake-flask fermentation, up to 812 mM succinate was accumulated in 80 hr in fed-batch fermentation. When SoyMolaGal hydrolysate was used as a carbon source, 628 mM (74 g/L) succinate was produced within 72 hr. In this study, we demonstrate that FZ661T can produce succinate quickly with relatively high yield, giving it the potential for industrial application., (© 2019 Wiley Periodicals, Inc.)

It is of great economic interest to produce succinate from low-grade carbon sources, e.g., lignocellulosic biomass hydrolysate, which mainly contains glucose and xylose. Inactivation of the glucose uptake system PtsG was evaluated for succinate production from xylose-rich feedstocks. Strains with integration of succinate production modules into the chromosome of Escherichia coli were then constructed. These strains have better succinate production performance from xylose-rich feedstocks than strain FZ560 harboring pHL413KF1. Glucose utilization was enhanced in FZ661T by manipulation of the gal operon to allow efficient use of the high-concentration glucose in woody biomass hydrolysate. Up to 906.7 mM (107.0 g/L) succinate was produced from mixed sugars in fed-batch fermentation and more than 461.7 mM (54.5 g/L) succinate was produced from woody hydrolysate in a batch fermentation. In this study, FZ661T was able to produce succinate from woody hydrolysate in minimal medium efficiently, making it attractive for industrial applications in succinate production.

Background: The rapid growth of available knowledge on metabolic processes across thousands of species continues to expand the possibilities of producing chemicals by combining pathways found in different species. Several computational search algorithms have been developed for automating the identification of possible heterologous pathways; however, these searches may return thousands of pathway results. Although the large number of results are in part due to the large number of possible compounds and reactions, a subset of core reaction modules is repeatedly observed in pathway results across multiple searches, suggesting that some subpaths between common compounds were more consistently explored than others.To reduce the resources spent on searching the same metabolic space, a new meta-algorithm for metabolic pathfinding, Hub Pathway search with Atom Tracking (HPAT), was developed to take advantage of a precomputed network of subpath modules. To investigate the efficacy of this method, we created a table describing a network of common hub metabolites and how they are biochemically connected and only offloaded searches to and from this hub network onto an interactive webserver capable of visualizing the resulting pathways., Results: A test set of nineteen known pathways taken from literature and metabolic databases were used to evaluate if HPAT was capable of identifying known pathways. HPAT found the exact pathway for eleven of the nineteen test cases using a diverse set of precomputed subpaths, whereas a comparable pathfinding search algorithm that does not use precomputed subpaths found only seven of the nineteen test cases. The capability of HPAT to find novel pathways was demonstrated by its ability to identify novel 3-hydroxypropanoate (3-HP) synthesis pathways. As for pathway visualization, the new interactive pathway filters enable a reduction of the number of displayed pathways from hundreds down to less than ten pathways in several test cases, illustrating their utility in reducing the amount of presented information while retaining pathways of interest., Conclusions: This work presents the first step in incorporating a precomputed subpath network into metabolic pathfinding and demonstrates how this leads to a concise, interactive visualization of pathway results. The modular nature of metabolic pathways is exploited to facilitate efficient discovery of alternate pathways.

This study demonstrates an effective technique for separating and purifying viable bacteria from samples that interfere with viability staining. The viability of Bifidobacterium longum ATCC 15707 was assessed using Percoll Buoyant Density Gradient Centrifugation (PBDC) to separate bacteria from complex non-dairy food matrices and Quantitative Fluorescence Microscopy (QFM) to determine individual cells using LIVE/DEAD BacLight bacterial viability staining. Water agar (3%) was used to retain cells of B. longum and offered a lower fluorescence background with BacLight viability staining, compared with fixation on polycarbonate (PC) black membrane. The effect of drying temperatures and non-dairy foods on viability of B. longum was assessed. B. longum coated on oat, peanut or raisin was separated by filtration, low- and high-speed centrifugation, flotation and sedimentation buoyant density centrifugation. Purified cells were subsequently deposited on water agar for rehydration followed by LIVE/DEAD BacLight viability staining and enumeration. Conventional plate counting was also conducted to compare viability results. Finally, this method was applied to assess cell membrane damages of B. longum incorporated onto non-dairy foods during 24 h drying. Furthermore, viability assessment of B. longum coated onto oat, peanut, or raisin was much lower by plate counting compared to viability staining. Drying appeared to have a greater impact when viability was assessed by plate counting compared to viability staining. IMPORTANCE: Enumeration of viable beneficial bacteria from function foods presents a significant bottleneck for product development and quality control. Interference with microscopic and/or fluorescent techniques by ingredients, time required to incubate plated microbes, and the transient nature of the colony forming unit make rapid assessment of viable bacteria difficult. Viability assessment of Bifidobacterium longum ATCC 15707 by Percoll Buoyant Density Gradient Centrifugation with LIVE/DEAD BacLight viability staining on water agar (3%) was in agreement with serial dilution enumeration. Without the need for incubation viability assessment by staining provided a more rapid means to assess the impact of drying on the viability of B. longum coated onto oat, peanut or raisin., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Hydroxy fatty acids (HFAs) are valuable compounds that are widely used in medical, cosmetic and food fields. Production of ω-HFAs via bioconversion by engineered Escherichia coli has received a lot of attention because this process is environmentally friendly. In this study, a whole-cell bio-catalysis strategy was established to synthesize medium-chain ω-HFAs based on the AlkBGT hydroxylation system from Pseudomonas putida GPo1. The effects of blocking the β-oxidation of fatty acids (FAs) and enhancing the transportation of FAs on ω-HFAs bio-production were also investigated. When fadE and fadD were deleted, the consumption of decanoic acid decreased, and the yield of ω-hydroxydecanoic acid was enhanced remarkably. Additionally, the co-expression of the FA transporter protein, FadL, played an important role in increasing the conversion rate of ω-hydroxydecanoic acid. As a result, the concentration and yield of ω-hydroxydecanoic acid in NH03(pBGT- fadL ) increased to 309 mg/L and 0.86 mol/mol, respectively. This whole-cell bio-catalysis system was further applied to the biosynthesis of ω-hydroxyoctanoic acid and ω-hydroxydodecanoic acid using octanoic acid and dodecanoic acid as substrates, respectively. The concentrations of ω-hydroxyoctanoic acid and ω-hydroxydodecanoic acid reached 275.48 and 249.03 mg/L, with yields of 0.63 and 0.56 mol/mol, respectively. This study demonstrated that the overexpression of AlkBGT coupled with native FadL is an efficient strategy to synthesize medium-chain ω-HFAs from medium-chain FAs in fadE and fadD mutant E. coli strains., (Copyright © 2019 He, Bennett, San and Wu.)

A symmetric origin for bacterial ferredoxins was first proposed over 50 y ago, yet, to date, no functional symmetric molecule has been constructed. It is hypothesized that extant proteins have drifted from their symmetric roots via gene duplication followed by mutations. Phylogenetic analyses of extant ferredoxins support the independent evolution of N- and C-terminal sequences, thereby allowing consensus-based design of symmetric 4Fe-4S molecules. All designs bind two [4Fe-4S] clusters and exhibit strongly reducing midpoint potentials ranging from -405 to -515 mV. One of these constructs efficiently shuttles electrons through a designed metabolic pathway in Escherichia coli These finding establish that ferredoxins consisting of a symmetric core can be used as a platform to design novel electron transfer carriers for in vivo applications. Outer-shell asymmetry increases sequence space without compromising electron transfer functionality., Competing Interests: The authors declare no conflict of interest.

Atom mapping of a chemical reaction is a mapping between the atoms in the reactant molecules and the atoms in the product molecules. It encodes the underlying reaction mechanism and, as such, constitutes essential information in computational studies in drug design. Various techniques have been investigated for the automatic computation of the atom mapping of a chemical reaction, approaching the problem as a graph matching problem. The graph abstraction of the chemical problem, though, eliminates crucial chemical information. There have been efforts for enhancing the graph representation by introducing the bond stabilities as edge weights, as they are estimated based on experimental evidence. Here, we present a fully automated optimization-based approach, named AMLGAM (Automated Machine Learning Guided Atom Mapping), that uses machine learning techniques for the estimation of the bond stabilities based on the chemical environment of each bond. The optimization method finds the reaction mechanism which favors the breakage/formation of the less stable bonds. We evaluated our method on a manually curated data set of 382 chemical reactions and ran our method on a much larger and diverse data set of 7400 chemical reactions. We show that the proposed method improves the accuracy over existing techniques based on results published by earlier studies on a common data set and is capable of handling unbalanced reactions.

Biological electron transfer is challenging to directly regulate using environmental conditions. To enable dynamic, protein-level control over energy flow in metabolic systems for synthetic biology and bioelectronics, we created ferredoxin logic gates that utilize transcriptional and post-translational inputs to control energy flow through a synthetic electron transfer pathway that is required for bacterial growth. These logic gates were created by subjecting a thermostable, plant-type ferredoxin to backbone fission and fusing the resulting fragments to a pair of proteins that self-associate, a pair of proteins whose association is stabilized by a small molecule, and to the termini of a ligand-binding domain. We show that the latter domain insertion design strategy yields an allosteric ferredoxin switch that acquires an oxygen-tolerant [2Fe-2S] cluster and can use different chemicals, including a therapeutic drug and an environmental pollutant, to control the production of a reduced metabolite in Escherichia coli and cell lysates.

Proteins from the ferredoxin (Fd) and flavodoxin (Fld) families function as low potential electrical transfer hubs in cells, at times mediating electron transfer between overlapping sets of oxidoreductases. To better understand protein electron carrier (PEC) use across the domains of life, we evaluated the distribution of genes encoding [4Fe-4S] Fd, [2Fe-2S] Fd, and Fld electron carriers in over 7,000 organisms. Our analysis targeted genes encoding small PEC genes encoding proteins having ≤200 residues. We find that the average number of small PEC genes per Archaea (~13), Bacteria (~8), and Eukarya (~3) genome varies, with some organisms containing as many as 54 total PEC genes. Organisms fall into three groups, including those lacking genes encoding low potential PECs (3%), specialists with a single PEC gene type (20%), and generalists that utilize multiple PEC types (77%). Mapping PEC gene usage onto an evolutionary tree highlights the prevalence of [4Fe-4S] Fds in ancient organisms that are deeply rooted, the expansion of [2Fe-2S] Fds with the advent of photosynthesis and a concomitant decrease in [4Fe-4S] Fds, and the expansion of Flds in organisms that inhabit low-iron host environments. Surprisingly, [4Fe-4S] Fds present a similar abundance in aerobes as [2Fe-2S] Fds. This bioinformatic study highlights understudied PECs whose structure, stability, and partner specificity should be further characterized., Competing Interests: Conflict of Interest Statement: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Clostridium acetobutylicum is a natural producer of butanol, butyrate, acetone and ethanol. The pattern of metabolites reflects the partitioning of redox equivalents between hydrogen and carbon metabolites. Here the exogenous genes of ferredoxin-NAD(P) + oxidoreductase (FdNR) and trans-enoyl-coenzyme reductase (TER) are introduced to three different Clostridium acetobutylicum strains to investigate the distribution of redox equivalents and butanol productivity. The FdNR improves NAD(P)H availability by capturing reducing power from ferredoxin. A butanol production of 9.01 g/L (36.9% higher than the control), and the highest ratios of butanol/acetate (7.02) and C 4 /C 2 (3.17) derived metabolites were obtained in the C acetobutylicum buk - strain expressing FdNR. While the TER functions as an NAD(P)H oxidase, butanol production was decreased in the C. acetobutylicum strains containing TER. The results illustrate that metabolic flux can be significantly changed and directed into butanol or butyrate due to enhancement of NAD(P)H availability by controlling electron flow through the ferredoxin node.

Methane, the primary component of natural gas, is the second most abundant greenhouse gas (GHG) and contributes significantly to climate change. The conversion of methane to industrial platform chemicals provides an attractive opportunity to decrease GHG emissions and utilize this inexpensive and abundantly available gas as a carbon feedstock. While technologies exist for chemical conversion of methane to liquid fuels, the technical complexity of these processes mandate high capital expenditure, large-scale commercial facilities to leverage economies of scale that cannot be efficiently scaled down. Alternatively, bioconversion technologies capable of efficient small-scale operation with high carbon and energy efficiency can enable deployment at remote methane resources inaccessible to current chemical technologies. Aerobic obligate methanotrophs, specifically Methylomicrobium buryatense 5GB1, have recently garnered increased research interest for development of such bio-technologies. In this study, we demonstrate production of C-4 carboxylic acids non-native to the host, specifically crotonic and butyric acids, from methane in an engineered M. buryatense 5GB1C by diversion of carbon flux through the acetyl-CoA node of central 'sugar' linked metabolic pathways using reverse β-oxidation pathway genes. The synthesis of short chain carboxylic acids through the acetyl-CoA node demonstrates the potential for engineering M. buryatense 5GB1 as a platform for bioconversion of methane to a number of value added industrial chemicals, and presents new opportunities for further diversifying the products obtainable from methane as the feedstock., (Copyright © 2018 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.)

It is of great economic interest to produce succinate from low-grade carbon sources, which can enhance the competitiveness of the biological route. In this study, succinate producer Escherichia coli CT550/pHL413KF1 was further engineered to efficiently use the mixed sugars from non-food based soybean hydrolysate to produce succinate under anaerobic conditions. Since many common E. coli strains fail to use galactose anaerobically even if they can use it aerobically, the glucose, and galactose related sugar transporters were deactivated individually and evaluated. The PTS system was found to be important for utilization of mixed sugars, and galactose uptake was activated by deactivating ptsG. In the ptsG - strain, glucose, and galactose were used simultaneously. Glucose was assimilated mainly through the mannose PTS system while galactose was transferred mainly through GalP in a ptsG - strain. A new succinate producing strain, FZ591C which can efficiently produce succinate from the mixed sugars present in soybean hydrolysate was constructed by integration of the high succinate yield producing module and the galactose utilization module into the chromosome of the CT550 ptsG - strain. The succinate yield reached 1.64 mol/mol hexose consumed (95% of maximum theoretical yield) when a mixed sugars feedstock was used as a carbon source. Based on the three monitored sugars, a nominal succinate yield of 1.95 mol/mol was observed as the strain can apparently also use some other minor sugars in the hydrolysate. In this study, we demonstrate that FZ591C can use soybean hydrolysate as an inexpensive carbon source for high yield succinate production under anaerobic conditions, giving it the potential for industrial application., (© 2018 Wiley Periodicals, Inc.)

While antibiotic-eluting polymethylmethacrylate space maintainers have shown efficacy in the treatment of bacterial periprosthetic joint infection and osteomyelitis, antifungal-eluting space maintainers are associated with greater limitations for treatment of fungal musculoskeletal infections including limited elution concentration and duration. In this study, we have designed a porous econazole-eluting space maintainer capable of greater inhibition of fungal growth than traditional solid space maintainers. The eluted econazole demonstrated bioactivity in a concentration-dependent manner against the most common species responsible for fungal periprosthetic joint infection as well as staphylococci. Lastly, these porous space maintainers retain compressive mechanical properties appropriate to maintain space before definitive repair of the joint or bony defect.

Fluorescent proteins are ubiquitous tools that are used to monitor the dynamic functions of natural and synthetic genetic circuits. However, these visual reporters can only be used in transparent settings, a limitation that complicates nondisruptive measurements of gene expression within many matrices, such as soils and sediments. We describe a new ratiometric gas reporting method for nondisruptively monitoring gene expression within hard-to-image environmental matrices. With this approach, C 2 H 4 is continuously synthesized by ethylene forming enzyme to provide information on viable cell number, and CH 3 Br is conditionally synthesized by placing a methyl halide transferase gene under the control of a conditional promoter. We show that ratiometric gas reporting enables the creation of Escherichia coli biosensors that report on acylhomoserine lactone (AHL) autoinducers used for quorum sensing by Gram-negative bacteria. Using these biosensors, we find that an agricultural soil decreases the bioavailable concentration of a long-chain AHL up to 100-fold. We also demonstrate that these biosensors can be used in soil to nondisruptively monitor AHLs synthesized by Rhizobium leguminosarum and degraded by Bacillus thuringiensis. Finally, we show that this new reporting approach can be used in Shewanella oneidensis, a bacterium that lives in sediments.

Several metabolic engineered Escherichia coli strains were constructed and evaluated for four-carbon dicarboxylic acid production. Fumarase A, fumarase B and fumarase C single, double and triple mutants were constructed in a ldhA adhE mutant background overexpressing the pyruvate carboxylase from Lactococcus lactis. All the mutants produced succinate as the main four-carbon (C4) dicarboxylic acid product when glucose was used as carbon source with the exception of the fumAC and the triple fumB fumAC deletion strains, where malate was the main C4-product with a yield of 0.61-0.67 mol (mole glucose) -1 . Additionally, a mdh mutant strain and a previously engineered high-succinate-producing strain (SBS550MG-Cms pHL413-Km) were investigated for aerobic malate production from succinate. These strains produced 40.38 mM (5.41 g/L) and 50.34 mM (6.75 g/L) malate with a molar yield of 0.53 and 0.55 mol (mole succinate) -1 , respectively. Finally, by exploiting the high-succinate production capability, the strain SBS550MG-Cms243 pHL413-Km showed significant malate production in a two-stage process from glucose. This strain produced 133 mM (17.83 g/L) malate in 47 h, with a high yield of 1.3 mol (mole glucose) -1 and productivity of 0.38 g L -1  h -1 .

Recent developments in metabolic engineering have led to the successful biosynthesis of valuable products, such as the precursor of the antimalarial compound, artemisinin, and opioid precursor, thebaine. Synthesizing these traditionally plant-derived compounds in genetically modified yeast cells introduces the possibility of significantly reducing the total time and resources required for their production, and in turn, allows these valuable compounds to become cheaper and more readily available. Most biosynthesis pathways used in metabolic engineering applications have been discovered manually, requiring a tedious search of existing literature and metabolic databases. However, the recent rapid development of available metabolic information has enabled the development of automated approaches for identifying novel pathways. Computer-assisted pathfinding has the potential to save biochemists time in the initial discovery steps of metabolic engineering. In this paper, we review the parameters and heuristics used to guide the search in recent pathfinding algorithms. These parameters and heuristics capture information on the metabolic network structure, compound structures, reaction features, and organism-specificity of pathways. No one metabolic pathfinding algorithm or search parameter stands out as the best to use broadly for solving the pathfinding problem, as each method and parameter has its own strengths and shortcomings. As assisted pathfinding approaches continue to become more sophisticated, the development of better methods for visualizing pathway results and integrating these results into existing metabolic engineering practices is also important for encouraging wider use of these pathfinding methods.

The viability of probiotics in non-dairy food products during storage is required to meet content criteria for probiotic products. This study investigated whether non-dairy foods could be matrices for probiotics. Selected probiotic bacteria were coated on non-dairy foods under two storage conditions, and viabilities were assessed. The non-dairy foods were coated with 5-7 log cfu g -1 of Lactobacillus acidophilus ATCC4356 T , Lactobacillus plantarum RC30, and Bifidobacterium longum ATCC15707 T . The coated non-dairy foods were stored at 20 °C and 20% relative humidity (RH) or 30 °C and 50% RH. Viability of probiotic bacteria was determined after 0, 2, and 4 weeks of storage. B. longum showed the highest survival at week 4 of 6.5-6.7 log cfu g -1 on wheat bran and oat, compared with 3.7-3.9 log cfu g -1 of L. acidophilus and 4.2-4.8 log cfu g -1 of L. plantarum at 20 °C 20% RH. Under the storage conditions of 30 °C 50% RH, survival of 4.5 log cfu g -1 of B. longum was also found on oat and peanut. This was two and four times higher than the population of L. acidophilus and L. plantarum , respectively. The results suggest that probiotics can survive on non-dairy foods under ambient storage conditions. However, the storage conditions, food matrices, and probiotic strains should be carefully chosen to maximize probiotic bacteria survival., Competing Interests: The authors declare no conflict of interest.

Microaerobic growth is of importance in ecological niches, pathogenic infections and industrial production of chemicals. The use of low levels of oxygen enables the cell to gain energy and grow more robustly in the presence of a carbon source that can be oxidized and provide electrons to the respiratory chain in the membrane. A considerable amount of information is available on the genes and proteins involved in respiratory growth and the regulation of genes involved in aerobic and anaerobic metabolism. The dependence of regulation on sensing systems that respond to reduced quinones (e.g. ArcB) or oxygen levels that affect labile redox components of transcription regulators (Fnr) are key in understanding the regulation. Manipulation of the amount of respiration can be difficult to control in dense cultures or inadequately mixed reactors leading to inhomogeneous cultures that may have lower than optimal performance. Efforts to control respiration through genetic means have been reported and address mutations affecting components of the electron transport chain. In a recent report completion for intermediates of the ubiquinone biosynthetic pathway was used to dial the level of respiration vs lactate formation in an aerobically grown E. coli culture.

Previously the development of a hyper acetone-butanol-ethanol (ABE) producing Clostridium acetobutylicum BKM19 strain capable of producing 30.5% more total solvent by random mutagenesis of its parental strain PJC4BK, which is a buk mutant C. acetobutylicum ATCC 824 strain is reported. Here, BKM19 and PJC4BK strains are re-sequenced by a high-throughput sequencing technique to understand the mutations responsible for enhanced solvent production. In comparison with the C. acetobutylicum PJC4BK, 13 single nucleotide variants (SNVs), one deletion and one back mutation SNV are identified in the C. acetobutylicum BKM19 genome. Except for one SNV found in the megaplasmid, all mutations are found in the chromosome of BKM19. Among them, a mutation in the thlA gene encoding thiolase is further studied with respect to enzyme activity and butanol production. The mutant thiolase (thlA V5A ) is showed a 32% higher activity than that of the wild-type thiolase (thlA WT ). In batch fermentation, butanol production is increased by 26% and 23% when the thlA V5A gene is overexpressed in the wild-type C. acetobutylicum ATCC 824 and in its derivative, the thlA-knockdown TKW-A strain, respectively. Based on structural analysis, the mutation in thiolase does not have a direct effect on the regulatory determinant region (RDR). However, the mutation at the 5 th residue seems to influence the stability of the RDR, and thus, increases the enzymatic activity and enhances solvent production in the BKM19 strain., (Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Reconstruction of large bone defects can be complicated by the presence of both infection and local antibiotic administration. This can be addressed through a two-stage reconstructive approach, called the Masquelet technique, that involves the generation of an induced osteogenic membrane over a temporary poly(methyl methacrylate) (PMMA) space maintainer, followed by definitive reconstruction after the induced membrane is formed. Given that infection and antibiotic delivery each have independent effects on local tissue response, the objective of this study is to evaluate the interaction between local clindamycin release and bacterial contamination with regards to infection prevention and the restoration of pro-osteogenic gene expression in the induced membrane. Porous PMMA space maintainers with or without clindamycin were implanted in an 8 mm rat femoral defect model with or without Staphylococcus aureus inoculation for 28 days in a full-factorial study design (four groups, n = 8/group). Culture results demonstrated that 8/8 animals in the inoculated/no antibiotic group were infected at 4 weeks, which was significantly reduced to 1/8 animals in the inoculated/antibiotic group. Quantitative polymerase chain reaction analysis demonstrated that clindamycin treatment restores inflammatory cytokine and growth factor expression to the same levels as the no inoculation/no antibiotic group, demonstrating that clindamycin can ameliorate the negative effects of bacterial inoculation and does not itself negatively impact the expression of important cytokines. Main effect analysis shows that bacterial inoculation and clindamycin treatment have independent and interacting effects on the gene expression profile of the induced membrane, further highlighting that antibiotics play an important role in the regeneration of infected defects apart from their antimicrobial properties.

The ferredoxin (Fd) protein family is a structurally diverse group of iron-sulfur proteins that function as electron carriers, linking biochemical pathways important for energy transduction, nutrient assimilation, and primary metabolism. While considerable biochemical information about individual Fd protein electron carriers and their reactions has been acquired, we cannot yet anticipate the proportion of electrons shuttled between different Fd-partner proteins within cells using biochemical parameters that govern electron flow, such as holo-Fd concentration, midpoint potential (driving force), molecular interactions (affinity and kinetics), conformational changes (allostery), and off-pathway electron leakage (chemical oxidation). Herein, we describe functional and structural gaps in our Fd knowledge within the context of a sequence similarity network and phylogenetic tree, and we propose a strategy for improving our understanding of Fd sequence-function relationships. We suggest comparing the functions of divergent Fds within cells whose growth, or other measurable output, requires electron transfer between defined electron donor and acceptor proteins. By comparing Fd-mediated electron transfer with biochemical parameters that govern electron flow, we posit that models that anticipate energy flow across Fd interactomes can be built. This approach is expected to transform our ability to anticipate Fd control over electron flow in cellular settings, an obstacle to the construction of synthetic electron transfer pathways and rational optimization of existing energy-conserving pathways.

Traditional visual reporters of gene expression have only very limited use in soils because their outputs are challenging to detect through the soil matrix. This severely restricts our ability to study time-dependent microbial gene expression in one of the Earth's largest, most complex habitats. Here we describe an approach to report on dynamic gene expression within a microbial population in a soil under natural water levels (at and below water holding capacity) via production of methyl halides using a methyl halide transferase. As a proof-of-concept application, we couple the expression of this gas reporter to the conjugative transfer of a bacterial plasmid in a soil matrix and show that gas released from the matrix displays a strong correlation with the number of transconjugant bacteria that formed. Gas reporting of gene expression will make possible dynamic studies of natural and engineered microbes within many hard-to-image environmental matrices (soils, sediments, sludge, and biomass) at sample scales exceeding those used for traditional visual reporting.

Antibiotic-releasing porous poly(methyl methacrylate) (PMMA) space maintainers, comprising PMMA with an aqueous porogen and a poly(DL-lactic- co -glycolic acid) (PLGA) antibiotic carrier, have been developed to facilitate local delivery of antibiotics and tissue integration. In this study, clindamycin-loaded space maintainers were used to investigate the effects of antibiotic release kinetics and dose upon bacterial clearance and bone and soft tissue healing in a pathogen-contaminated rabbit mandibular defect. Three formulations were fabricated for either high dose burst release (7 days) or with PLGA microparticles for extended release (28 days) at high and low dose. Although inoculated bacteria were not recovered from any specimens, the burst release formulation showed less inflammation and fibrous capsule formation and more bone formation close to the implant than the low dose extended release formulation by histologic analysis. These results suggest that local antibiotic release kinetics and dose affect soft and hard tissue healing independent from its ability to clear bacteria.

Severe injuries in the craniofacial complex, resulting from trauma or pathology, present several challenges to functional and aesthetic reconstruction. The anatomy and position of the craniofacial region make it vulnerable to injury and subsequent local infection due to external bacteria as well as those from neighbouring structures like the sinuses, nasal passages, and mouth. Porous polymethylmethacrylate (PMMA) "space maintainers" have proven useful in staged craniofacial reconstruction by promoting healing of overlying soft tissue prior to reconstruction of craniofacial bones. We describe herein a method by which the porosity of a prefabricated porous PMMA space maintainer, generated by porogen leaching, can be loaded with a thermogelling copolymer-based drug delivery system. Porogen leaching, space maintainer prewetting, and thermogel loading all significantly affected the loading of a model antibiotic, colistin. Weeks-long release of antibiotic at clinically relevant levels was achieved with several formulations. In vitro assays confirmed that the released colistin maintained its antibiotic activity against several bacterial targets. Our results suggest that this method is a valuable tool in the development of novel therapeutic approaches for the treatment of severe complex, infected craniofacial injuries.

Various methods have been developed for gene disruption in bacteria; however, extra in vitro manipulation steps or the residual presence of a scar in the host chromosome limits the use of such methods. By utilizing the unique properties of ISHp608, we have developed a simple and precise method for genome manipulation in Escherichia coli that alters the gene sequence without leaving foreign DNA in the chromosome. This strategy involves PCR amplification of a DNA cassette containing ISHp608-LE (left end)-antibiotic resistance gene-counterselection marker-ISHp608-RE (right end) by using primers containing extensions homologous to the adjacent regions of the target gene on the chromosome. The λ Red mediated recombination of the PCR product and antibiotic resistance screening results in transformants with a modified gene target. The ISHp608-LE-antibiotic resistance gene-counterselection marker-ISHp608-RE cassette can then be excised using a temperature sensitive plasmid expressing the TnpA transposase, which precisely cleaves ISHp608-LE and ISHp608-RE without leaving a scar sequence. We demonstrated lacZ gene point mutation repair, two precise disruptions of the lacZ gene and constructed a library of lacZ variants having variable β-galactosidase activity by changing its ribosome binding site sequences using the ISHp608 system. This technique can be used in E. coli genome modification and could be extended for use in other bacteria., (Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Conversion of biomass feedstock to chemicals and fuels has attracted increasing attention recently. Soybean meal, containing significant quantities of carbohydrates, is an inexpensive renewable feedstock. Glucose, galactose, and fructose can be obtained by enzymatic hydrolysis of soluble carbohydrates of soybean meal. Free fatty acids (FFAs) are valuable molecules that can be used as precursors for the production of fuels and other value-added chemicals. In this study, free fatty acids were produced by mutant Escherichia coli strains with plasmid pXZ18Z (carrying acyl-ACP thioesterase (TE) and (3R)-hydroxyacyl-ACP dehydratase) using individual sugars, sugar mixtures, and enzymatic hydrolyzed soybean meal extract. For individual sugar fermentations, strain ML211 (MG1655 fadD(-) fabR(-) )/pXZ18Z showed the best performance, which produced 4.22, 3.79, 3.49 g/L free fatty acids on glucose, fructose, and galactose, respectively. While the strain ML211/pXZ18Z performed the best with individual sugars, however, for sugar mixture fermentation, the triple mutant strain XZK211 (MG1655 fadD(-) fabR(-) ptsG(-) )/pXZ18Z with an additional deletion of ptsG encoding the glucose-specific transporter, functioned the best due to relieved catabolite repression. This strain produced approximately 3.18 g/L of fatty acids with a yield of 0.22 g fatty acids/g total sugar. Maximum free fatty acids production of 2.78 g/L with a high yield of 0.21 g/g was achieved using soybean meal extract hydrolysate. The results suggested that soybean meal carbohydrates after enzymatic treatment could serve as an inexpensive feedstock for the efficient production of free fatty acids., (© 2015 Wiley Periodicals, Inc.)

A novel strategy to finely control the electron transfer chain (ETC) activity of Escherichia coli was established. In this study, the fine-tuning of the ubiquinone biosynthesis pathway was applied to further controlling ETC function in coenzyme Q8 biosynthesis-deficient E. coli strains, HW108 and HW109, which contain mutations in ubiE and ubiG, respectively. A competing pathway on the intermediate substrates of the Q8 synthesis pathway, catalyzed by diphosphate:4-hydroxybenzoate geranyltransferase (PGT-1) of Lithospermum erythrorhizon, was introduced into these mutant strains. A nearly theoretical yield of lactate production can be achieved under fully aerobic conditions via an in vivo, genetically fine-tunable means to further control the activity of the ETC of the Q8 biosynthesis-deficient E. coli strains., (© 2015 Wiley Periodicals, Inc.)

To be competitive with current petrochemicals, microbial synthesis of free fatty acids can be made to rely on a variety of renewable resources rather than on food carbon sources, which increase its attraction for governments and companies. Industrial waste soybean meal is an inexpensive feedstock, which contains soluble sugars such as stachyose, raffinose, sucrose, glucose, galactose, and fructose. Free fatty acids were produced in this report by introducing an acyl-ACP carrier protein thioesterase and (3R)-hydroxyacyl-ACP dehydratase into E. coli. Plasmid pRU600 bearing genes involved in raffinose and sucrose metabolism was also transformed into engineered E. coli strains, which allowed more efficient utilization of these two kinds of specific oligosaccharide present in the soybean meal extract. Strain ML103 (pRU600, pXZ18Z) produced ~1.60 and 2.66 g/L of free fatty acids on sucrose and raffinose, respectively. A higher level of 2.92 g/L fatty acids was obtained on sugar mixture. The fatty acid production using hydrolysate obtained from acid or enzyme based hydrolysis was evaluated. Engineered strains just produced ~0.21 g/L of free fatty acids with soybean meal acid hydrolysate. However, a fatty acid production of 2.61 g/L with a high yield of 0.19 g/g total sugar was observed on an enzymatic hydrolysate. The results suggest that complex mixtures of oligosaccharides derived from soybean meal can serve as viable feedstock to produce free fatty acids. Enzymatic hydrolysis acts as a much more efficient treatment than acid hydrolysis to facilitate the transformation of industrial waste from soybean processing to high value added chemicals., (© 2015 American Institute of Chemical Engineers.)

A novel strategy to finely control a large metabolic flux by using a "metabolic transistor" approach was established. In this approach a small change in the level or availability of an essential component for the process is controlled by adding a competitive reaction that affects a precursor or an intermediate in its biosynthetic pathway. The change of the basal level of the essential component, considered as a base current in a transistor, has a large effect on the flux through the major pathway. In this way, the fine-tuning of a large flux can be accomplished. The "metabolic transistor" strategy was applied to control electron transfer chain function by manipulation of the quinone synthesis pathway in Escherichia coli. The achievement of a theoretical yield of lactate production under aerobic conditions via this strategy upon manipulation of the biosynthetic pathway of the key participant, ubiquinone-8 (Q8), in an E. coli strain provides an in vivo, genetically tunable means to control the activity of the electron transfer chain and manipulate the production of reduced products while limiting consumption of oxygen to a defined amount., (Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.)

The review describes efforts toward metabolic engineering of production of organic acids. One aspect of the strategy involves the generation of an appropriate amount and type of reduced cofactor needed for the designed pathway. The ability to capture reducing power in the proper form, NADH or NADPH for the biosynthetic reactions leading to the organic acid, requires specific attention in designing the host and also depends on the feedstock used and cell energetic requirements for efficient metabolism during production. Recent work on the formation and commercial uses of a number of small mono- and diacids is discussed with redox differences, major biosynthetic precursors and engineering strategies outlined. Specific attention is given to those acids that are used in balancing cell redox or providing reduction equivalents for the cell, such as formate, which can be used in conjunction with metabolic engineering of other products to improve yields. Since a number of widely studied acids derived from oxaloacetate as an important precursor, several of these acids are covered with the general strategies and particular components summarized, including succinate, fumarate and malate. Since malate and fumarate are less reduced than succinate, the availability of reduction equivalents and level of aerobiosis are important parameters in optimizing production of these compounds in various hosts. Several other more oxidized acids are also discussed as in some cases, they may be desired products or their formation is minimized to afford higher yields of more reduced products. The placement and connections among acids in the typical central metabolic network are presented along with the use of a number of specific non-native enzymes to enhance routes to high production, where available alternative pathways and strategies are discussed. While many organic acids are derived from a few precursors within central metabolism, each organic acid has its own special requirements for high production and best compatibility with host physiology.

Purpose: This study investigated the effects of the physicochemical properties of antibiotics on the morphology, loading efficiency, size, release kinetics, and antibiotic efficacy of loaded poly(DL-lactic-co-glycolic acid) (PLGA) microparticles (MPs) at different loading percentages., Methods: Cefazolin, ciprofloxacin, clindamycin, colistin, doxycycline, and vancomycin were loaded at 10 and 20 wt% into PLGA MPs using a water-in-oil-in water double emulsion fabrication protocol. Microparticle morphology, size, loading efficiency, release kinetics, and antibiotic efficacy were assessed., Results: The results from this study demonstrate that the chemical nature of loaded antibiotics, especially charge and molecular weight, influence the incorporation into and release of antibiotics from PLGA MPs. Drugs with molecular weights less than 600 Da displayed biphasic release while those with molecular weights greater than 1,000 Da displayed triphasic release kinetics. Large molecular weight drugs also had a longer delay before release than smaller molecular weight drugs. The negatively charged antibiotic cefazolin had lower loading efficiency than positively charged antibiotics. Microparticle size appeared to be mainly controlled by fabrication parameters, and partition and solubility coefficients did not appear to have an obvious effect on loading efficiency or release. Released antibiotics maintained their efficacy against susceptible strains over the duration of release. Duration of release varied between 17 and 49 days based on the type of antibiotic loaded., Conclusions: The data from this study indicate that the chemical nature of antibiotics affects properties of antibiotic-loaded PLGA MPs and allows for general prediction of loading and release kinetics.

Enzymatic synthesis of some industrially important compounds depends heavily on cofactor NADPH as the reducing agent. This is especially true in the synthesis of chiral compounds that are often used as pharmaceutical intermediates to generate the correct stereochemistry in bioactive products. The high cost and technical difficulty of cofactor regeneration often pose a challenge for such biocatalytic reactions. In this study, to increase NADPH bioavailability, the native NAD(+)-dependent glyceraldehyde-3-phosphate dehydrogenase (GAPDH) gapA gene in Escherichia coli was replaced with a NADP(+)-dependent gapB from Bacillus subtilis. To overcome the limitation of NADP(+) availability, E. coli NAD kinase, nadK was also coexpressed with gapB. The recombinant strains were then tested in three reporting systems: biosynthesis of lycopene, oxidation of cyclohexanone with cyclohexanone monooxygenase (CHMO), and an anaerobic system utilizing 2-haloacrylate reductase (CAA43). In all the reporting systems, replacing NAD(+)-dependent GapA activity with NADP(+)-dependent GapB activity increased the synthesis of NADPH-dependent compounds. The increase was more pronounced when NAD kinase was also overexpressed in the case of the one-step reaction catalyzed by CAA43 which approximately doubled the product yield. These results validate this novel approach to improve NADPH bioavailability in E. coli and suggest that the strategy can be applied in E. coli or other bacterium-based production of NADPH-dependent compounds.

Cofactors provide redox carriers for biosynthetic reactions, catabolic reactions and act as important agents in transfer of energy for the cell. Recent advances in manipulating cofactors include culture conditions or additive alterations, genetic modification of host pathways for increased availability of desired cofactor, changes in enzyme cofactor specificity, and introduction of novel redox partners to form effective circuits for biochemical processes and biocatalysts. Genetic strategies to employ ferredoxin, NADH and NADPH most effectively in natural or novel pathways have improved yield and efficiency of large-scale processes for fuels and chemicals and have been demonstrated with a variety of microbial organisms., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Succinic acid is a specialty chemical having numerous applications in industrial, pharmaceutical and food uses. One of the major challenges in the succinate fermentation process is eliminating the formation of byproducts. In this study, we describe eliminating byproduct formate and improving succinate productivity by reengineering a high succinate producing E. coli strain SBS550MG-Cms243(pHL413Km). The NAD(+)-dependent formate dehydrogenase gene (fdh1) of Candida boidinii was coexpressed with Lactococcus lactis pyruvate carboxylase (pycA) under the control of Ptrc and PpycA promoters in plasmid pHL413KF1. The newly introduced fdh1 converts 1 mol of formate into 1 mol of NADH and CO2. The reengineered strain SBS550MG-Cms243(pHL413KF1) retains the reducing power of formate through an increase in NADH availability. In anaerobic shake flask fermentations, the parent strain SBS550MG-Cms243(pHL413Km) consumed 99.86 mM glucose and produced 172.38 mM succinate, 16.16 mM formate and 4.42 mM acetate. The FDH bearing strain, SBS550MG-Cms243(pHL413KF1) consumed 98.43 mM glucose and produced 171.80 mM succinate, 1mM formate and 5.78 mM acetate. Furthermore, external formate supplementation to SBS550MG(pHL413KF1) fermentations resulted in about 6% increase in succinate yields as compared to SBS550MG(pHL413Km). In an anaerobic fed-batch bioreactor process, the average glucose consumption rate, succinate productivity, and byproduct formate concentration of SBS550MG(pHL413Km) was 1.40 g/L/h, 1g/L/h, and 17 mM, respectively. Whereas, the average glucose consumption rate, succinate productivity and byproduct formate concentration of SBS550MG(pHL413KF1) was 2 g/L/h, 2 g/L/h, 0-3 mM respectively. A high cell density culture of SBS550MG(pHL413KF1) showed further improvement in succinate productivity with a higher glucose consumption rate. Reduced levels of byproduct formate in succinate fermentation broth would provide an opportunity for reducing the cost associated with downstream processing, purification, and waste disposal., (Copyright © 2013 Elsevier Inc. All rights reserved.)

This study evaluated the in vitro and in vivo performance of antibiotic-releasing porous polymethylmethacrylate (PMMA)-based space maintainers comprising a gelatin hydrogel porogen and a poly(dl-lactic-co-glycolic acid) (PLGA) particulate carrier for antibiotic delivery. Colistin was released in vitro from either gelatin or PLGA microparticle loaded PMMA constructs, with gelatin-loaded constructs releasing colistin over approximately 7 days and PLGA microparticle-loaded constructs releasing colistin for up to 8 weeks. Three formulations with either burst release or extended release at different doses were tested in a rabbit mandibular defect inoculated with Acinetobacter baumannii (2×10(7) colony forming units ml(-1)). In addition, one material control that released antibiotic but was not inoculated with A. baumannii was tested. A. baumannii was not detectable in any animal after 12 weeks on culture of the defect, saliva, or blood. Defects with high dose extended release implants had greater soft tissue healing compared with defects with burst release implants, with 8 of 10 animals showing healed mucosae compared with 2 of 10 respectively. Extended release of locally delivered colistin via a PLGA microparticle carrier improved soft tissue healing compared with implants with burst release of colistin from a gelatin carrier., (Copyright © 2013 Acta Materialia Inc. All rights reserved.)

The synthesis of several industrially useful compounds are cofactor-dependent, requiring reducing equivalents like NADPH in enzymatic reactions leading up to the synthesis of high-value compounds like polymers, chiral alcohols, and antibiotics. However, NADPH is costly and has limited intracellular availability. This study focuses on the study of the effect of the two transhydrogenase enzymes of Escherichia coli, PntAB and UdhA (SthA) on reducing equivalents-dependent biosynthesis. The production of (S)-2-chloropropionate from 2-chloroacrylate is used as a model system for monitoring NADPH availability because 2-haloacrylate reductase, the enzyme catalyzing the one-step conversion to (S)-2-chloropropionate in the synthesis pathway, requires NADPH as a cofactor. Results suggest that the presence of UdhA increases product yield and NADPH availability while the presence of PntAB has the opposite effect. A maximum product yield of 1.4 mol product/mol glucose was achieved aerobically in a pnt-deletion strain with udhA overexpression, a 150% improvement over the wild-type control strain., (© 2013 American Institute of Chemical Engineers.)

NADPH-dependent reactions play important roles in production of industrially valuable compounds. In this study, we used phosphofructokinase (PFK)-deficient strains to direct fructose-6-phosphate to be oxidized through the pentose phosphate pathway (PPP) to increase NADPH generation. pfkA or pfkB single deletion and double-deletion strains were tested for their ability to produce lycopene. Since lycopene biosynthesis requires many NADPH, levels of lycopene were compared in a set of isogenic strains, with the pfkA single deletion strain showing the highest lycopene yield. Using another NADPH-requiring process, a one-step reduction reaction of 2-chloroacrylate to 2-chloropropionic acid by 2-haloacrylate reductase, the pfkA pfkB double-deletion strain showed the highest yield of 2-chloropropionic acid product. The combined effect of glucose-6-phosphate dehydrogenase overexpression or lactate dehydrogenase deletion with PFK deficiency on NADPH bioavailability was also studied. The results indicated that the flux distribution of fructose-6-phosphate between glycolysis and the pentose phosphate pathway determines the amount of NAPDH available for reductive biosynthesis.

The transformation of trinitrotoluene (TNT) by several mutant strains of Clostridium acetobutylicum has been examined to analyze the maximal rate of initial transformation, determine the effects of metabolic mutations of the host on transformation rate, and to assess the cell metabolic changes brought about during TNT transformation. Little difference in the maximal rate of TNT degradation in early acid phase cultures was found between the parental ATCC 824 strain and strains altered in the acid forming pathways (phosphotransacetylase, or butyrate kinase) or in a high-solvent-producing strain (mutant B). This result is in agreement with the previous findings of a similar degradation rate in a degenerate strain (M5) that had lost the ability to produce solvent. A series of antisense constructs were made that reduced the expression of hydA, encoding the Fe-hydrogenase, or hydE and hydF, genes encoding hydrogenase maturating proteins. While the antisense hydA strain had only ∼30 % of the activity of wild type, the antisense hydE strain exhibited a TNT degradation rate around 70 % that of the parent. Overexpression of hydA modestly increased the TNT degradation rate in acid phase cells, suggesting the amount of reductant flowing into hydrogenase rather than the hydrogenase level itself was a limiting factor in many situations. The redox potential, hydrogen evolution, and organic acid metabolites produced during rapid TNT transformation in early log phase cultures were measured. The redox potential of the acid-producing culture decreased from -370 to -200 mV immediately after addition of TNT and the hydrogen evolution rate decreased, lowering the hydrogen to carbon dioxide ratio from 1.4 to around 1.1 for 15 min. During the time of TNT transformation, the treated acidogenic cells produced less acetate and more butyrate. The results show that during TNT transformation, the cells shift metabolism away from hydrogen formation to reduction of TNT and the resulting effects on cell redox cofactors generate a higher proportion of butyrate.

Escherichia coli strains HL2765 and HL27659k harboring pRU600 and pKK313 were examined for succinate production under aerobic conditions using galactose, sucrose, raffinose, stachyose, and mixtures of these sugars extracted from soybean meal and soy solubles. HL2765(pKK313)(pRU600) and HL27659k(pKK313)(pRU600) consumed 87mM and 98mM hexose of soybean meal extract and produced 83mM and 95mM succinate, respectively. While using soy solubles extract, HL2765(pKK313)(pRU600) and HL27659k(pKK313)(pRU600) consumed 160mM and 187mM hexose and produced 158mM and 183mM succinate, respectively. Succinate yield of HL2765(pKK313)(pRU600) was low as compared to that of HL27659k(pKK313)(pRU600) while using acid hydrolysate of soybean meal or soy solubles extracts. Maximum succinate production of 312mM with a molar yield of 0.82mol/mol hexose was obtained using soy solubles hydrolysate by HL27659k(pKK313)(pRU600). This study demonstrated the use of soluble carbohydrates of the renewable feedstock, soybean as an inexpensive carbon source to produce succinate by fermentation., (Copyright © 2012 Elsevier Ltd. All rights reserved.)