Search

Nanomaterials (NMs) can be produced in plenty of variants posing several challenges for NM hazard and risk assessment. Metabolomic profiling of NM-treated cells and tissues allows for insights into underlying Mode-of-Action (MoA) and offers several advantages in this context. It supports the description of Adverse Outcome Pathways (AOPs) and, therefore, tailored AOP-based hazard testing strategies. Moreover, it bears great potential for biomarker discovery supporting toxicity prediction. Here, we applied metabolomics profiling to cells treated with four well-selected SiO2 variants, differing in structure, size and surface charge. TiO2 NM-105 served as a benchmark. Responses were studied in vitro in rat lung epithelial cells (RLE-6TN) and alveolar macrophages (NR8383) and compared to in vivo responses in rat lung tissues obtained from in vivo instillation and short-term inhalation studies (STIS). Time- and concentration-dependent changes were observed in both in vitro models but with cell-type specific responses. Overall, the levels of lipids and biogenic amines (BAs) tended to increase in epithelial cells but decreased in macrophages. Many identified metabolites like Met-SO, hydroxy-Pro and spermidine were related to oxidative stress, indicating that oxidative stress contributes to the MoA for the selected NMs. Several biomarker candidates such as Asp, Asn, Ser, Pro, spermidine, putrescine and LysoPCaC16:1 were identified in vitro and verified in vivo. In this study, we successfully applied a metabolomics workflow for in vitro and in vivo samples, which proved to be well suited to identify potential biomarkers, to gain insights into NM structure–activity relationship and into the underlying MoA.

Improved strategies are required for testing nanomaterials (NMs) to make hazard and risk assessment more efficient and sustainable. Including reduced reliance on animal models, without decreasing the level of human health protection. Acellular detection of reactive oxygen species (ROS) may be useful as a screening assay to prioritize NMs of high concern. To improve reliability and reproducibility, and minimize uncertainty, a standard operating procedure (SOP) has been developed for the detection of ROS using the 2',7'-dichlorodihydrofluorescein diacetate (DCFH2-DA) assay. The SOP has undergone an inter- and intra-laboratory comparison, to evaluate robustness, reliability, and reproducibility, using representative materials (ZnO, CuO, Mn2O3, and BaSO4 NMs), and a number of calibration tools to normalize data. The SOP includes an NM positive control (nanoparticle carbon black (NPCB)), a chemical positive control (SIN-1), and a standard curve of fluorescein fluorescence. The interlaboratory comparison demonstrated that arbitrary fluorescence units show high levels of partner variability; however, data normalization improved variability. With statistical analysis, it was shown that the SIN-1 positive control provided an extremely high level of reliability and reproducibility as a positive control and as a normalization tool. The NPCB positive control can be used with a relatively high level of reproducibility, and in terms of the representative materials, the reproducibility CuO induced-effects was better than for Mn2O3. Using this DCFH2-DA acellular assay SOP resulted in a robust intra-laboratory reproduction of ROS measurements from all NMs tested, while effective reproduction across different laboratories was also demonstrated; the effectiveness of attaining reproducibility within the interlaboratory assessment was particle-type-specific.

13 Pág. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, Nanotechnology is a key enabling technology with billions of euros in global investment from public funding, which include large collaborative projects that have investigated environmental and health safety aspects of nanomaterials, but the reuse of accumulated data is clearly lagging behind. Here we summarize challenges and provide recommendations for the efficient reuse of nanosafety data, in line with the recently established FAIR (findable, accessible, interoperable and reusable) guiding principles. We describe the FAIR-aligned Nanosafety Data Interface, with an aggregated findability, accessibility and interoperability across physicochemical, bio-nano interaction, human toxicity, omics, ecotoxicological and exposure data. Overall, we illustrate a much-needed path towards standards for the optimized use of existing data, which avoids duplication of efforts, and provides a multitude of options to promote safe and sustainable nanotechnology., The work leading to this article has received funding from the European Union’s Horizon 2020 Research and Innovation programme, Grant Agreements no. 646221 (NanoReg2, 2015–2019), no. 814401 (Gov4Nano, 2019–2022) and no. 814425 (RiskGONE 2019–2023). In addition, the European Union’s 7th Framework Programme projects NANoREG (2013–2017, Grant Agreement no. 310584), NanoTEST (2008–2012, no. 201335) and ENPRA (2009–2012, no. 228789), the European Union’s Health Programme Joint Action project NANOGENOTOX (2010–2013, no. 2009 21 01) and the US NIH NCI caNanoLab portal are acknowledged for providing data

The physico-chemical properties of manufactured nanomaterials (NMs) can be fine-tuned to obtain different functionalities addressing the needs of specific industrial applications. The physico-chemical properties of NMs also drive their biological interactions. Accordingly, each NM requires an adequate physico-chemical characterization and potentially an extensive and time-consuming (eco)toxicological assessment, depending on regulatory requirements. Grouping and read-across approaches, which have already been established for chemicals in general, are based on similarity between substances and can be used to fill data gaps without performing additional testing. Available data on “source” chemicals are thus used to predict the fate, toxicokinetics and/or (eco)toxicity of structurally similar “target” chemical(s). For NMs similar approaches are only beginning to emerge and several challenges remain, including the identification of the most relevant physico-chemical properties for supporting the claim of similarity. In general, NMs require additional parameters for a proper physico-chemical description. Furthermore, some parameters change during a NM's life cycle, suggesting that also the toxicological profile may change. This paper compares existing concepts for NM grouping, considering their underlying basic principles and criteria as well as their applicability for regulatory and other purposes. Perspectives and recommendations based on experiences obtained during the EU Horizon 2020 project NanoReg2 are presented. These include, for instance, the importance of harmonized data storage systems, the application of harmonized scoring systems for comparing biological responses, and the use of high-throughput and other screening approaches. We also include references to other ongoing EU projects addressing some of these challenges.

The giant Raman enhancement observed by means of the SERS (surface-enhanced Raman scattering) technique upon adsorption of molecules on nanostructured Ag, Au or Cu surfaces allows widespread applications in materials science. The Raman intensities of the adsorbed molecules can be enhanced up to 107-fold upon going to the SERS spectra. Recently, the SERS spectroscopy has been applied to single-molecule detection, showing enhancement factors up to 1014–1015. In this work, by depositing silver colloidal suspensions on different metal surfaces, dry layers of Ag nanoparticles were obtained, as detected by atomic force microscopy (AFM) measurements. Hence, substrates, unable to give rise to the Raman enhancement of the adsorbate, become SERS-active, avoiding the roughening treatment of the metal surfaces.

We observed Forster resonance energy transfer (FRET) with a covalently linked donor-acceptor pair D-A consisting of two naphthalene groups acting as the donors and a benzofurazan group acting as the acceptor and adsorbed onto Ag or Au nanoisland films. The use of metal nanoisland films, which caused a strong enhancement of the Raman signal, permitted description of the adsorption mechanism onto the two metals. The intense fluorescence response of molecular adsorbates and the different behavior of the antenna on Ag and Au nanoislands are partly explained in terms of the radiating plasmon model.

Gold nanoparticles (AuNPs) coated with the diacetylene henicosa-10,12-diyn-1-yl (DS9) disulfide were successfully prepared by direct synthesis in toluene solutions. The average size of the nanohybrid metal core was finely adjusted by manipulation of the preparative conditions in the diameter range from 1.6 to 7.5 nm, as determined by TEM characterization. The topochemical polymerization of DS9 chemisorbed onto the gold nanoclusters of different size was carried out in colloidal suspensions by exposure to UV radiation and the process was monitored by UV-Vis and Raman spectroscopies. The results showed that in these assemblies the monomer undergoes an intra-particle polymerization and that the dominant polydiacetylene phase present is ruled by the core size. The deposition of the photoirradiated colloids onto different substrates was found to leave the polydiacetylene conjugation unaltered.

This paper reports on the fabrication of self-assembled monolayers containing disulfide-functionalized diacetylenes. To this purpose, two diacetylene derivatives were synthesized: the novel 14-(9H-9-carbazolyl)tetradeca-10,12-diyn-1-yl disulfide (CDS9) and the henicosa-10,12-diyn-1-yl disulfide (DS9). Both monomers were employed to prepare two-dimensional self-assembled monolayers (2D-SAMs) by chemisorption on gold-sputtered platforms and three-dimensional self-assembled monolayers (3D-SAMs) on gold nanoclusters by direct synthesis in organic solvent. The chemisorbed diacetylenes were then converted to the polymeric form by exposure to UV radiation, and their morphological and spectroscopic properties investigated by several techniques. From SERS data it was inferred that both monomers show the same behavior, in that the highly conjugated blue phase was observed in the 3D-SAMs, while only the less extended red conformation was found in the corresponding 2D-SAMs.

We grew self-assembled monolayers (SAMs) of a novel carbazolyldiacetylene, CDS9, on Ag-coated glass substrates and demonstrated the topochemical UV polymerization of CDS9 monolayers by recording the Raman spectra of the organic film before and after UV exposure. We observed coexistence of the blue and red polymeric phases, usually present in polydiacetylenes. The features of the organic/metal interfaces of our samples were properly varied, in order to achieve surface enhancement of the Raman (SERS) response of the ultra-thin molecular layers.

An innovative setup to combine electrochemical and in situ surface X-ray diffraction (SXRD) measurements is described. This electrochemical cell has a different design from the other ones commonly used for X-ray diffraction studies. It allows the sample surface to stay always completely immersed into the solution under controlled potential conditions even during the SXRD measurements. The X-ray beam crosses the liquid (about 1 cm) and the cell walls. Because of the high X-ray energy, the beam attenuation is negligible and by an appropriate positioning of the detector arm slits it is possible to minimize the diffuse scattering induced by the liquid and cell walls in order to still detect the minima of the crystal truncation rods (CTRs). The liquid solution in the cell is managed by a special device, which allows the controlled exchange of the electrolyte solutions necessary in the electrochemical atomic layer epitaxy (ECALE) growth. The whole setup can be remotely controlled from outside the experimental hutch by a dedicated computer. As an example we report measurements on S layers deposited at underpotential on the Ag(1 1 1) surface, and on CdS films of increasing thickness.

UV polymerization of self-assembled monolayers of a novel carbazolyl-diacetylene (CDS9) chemisorbed on silver films was demonstrated by surface plasmon resonance (SPR) and surface enhanced Raman scattering (SERS) experiments. SPR tests performed during UV exposure permitted one to observe the growth of the absorption coefficient, associated with the formation of the polymeric backbone. The Raman spectra of polymerized monolayers exhibited the bands associated with the C=C stretching modes of the conjugated backbone, typical of the blue and red polymeric phases usually present in polydiacetylenes, with a clear predominance of the red form. Moreover, the strong surface enhancement of the Raman band corresponding to the aromatic C=C stretching modes suggested that carbazolyl groups arrange nearly perpendicularly to the metal surface. In contrast, the absence of a SERS signal in the region of conjugated C[triple bond]C bond stretchings confirmed a polymerization scheme with conjugated triple bonds nearly parallel to the plane of the metal.

Surface Enhanced Raman Scattering experiments were performed on self-assembled carbazolyl-diacetylene monolayers chemisorbed on smooth gold substrates and UV irradiated. The Raman enhancement was ensured by depositing silver colloidal nanoparticles, which strongly increase the surface roughness. The co-existence of two polymer phases, characterized by different degree of order in the polymeric backbone, was detected by SERS results, which suggest a polymerization scheme with conjugated triple bonds nearly parallel to the plane of the metal surface.