Search

A study examined the ability of 32 grade-5 students in Alberta (Canada) to interpret Radarsat satellite radar images. The students were able to interpret most elements of the images, but working directly with the CD-ROM proved too difficult for them. The Radarsat images have limited value as a geographic resource at the grade-5 level. (TD)

Describes the Canadian Radarsat Satellite and remote sensing in order to demonstrate that teachers can incorporate this technology into the classroom. Maintains that third, fourth, fifth, and sixth grade students can understand and interpret remote sensing images and Landsat images. Provides a list of teaching resources other than the expensive Radarsat CD-ROMs. (CMK)

While many studies have been conducted regarding wind-driven Ka-band scattering on the ocean and sea surfaces, few have identified the impacts of Ka-band scattering on small inland water bodies, and fewer have identified the influence of wind on coherence over water. These previous studies have been limited in spatial scale, covering only large water bodies >25 km2. The recently launched Surface Water and Ocean Topography (SWOT) mission is the first Ka-band InSAR satellite designed for mapping water surface elevations and open water areas for rivers as narrow as 100 m and lakes as small as 0.0625 km2. Because measurements of these types are novel, there remains some uncertainty about expected backscatter amplitudes given wind-driven water surface roughness variability. A previous study using the airborne complement to SWOT, AirSWOT, found that low backscatter and low coherence values were indicative of higher errors in the water surface elevation products, recommending minimum thresholds for backscatter and coherence for filtering the data to increase the accuracy of averaged data for lakes and rivers. We determined that the global average wind speed over lakes is 4 m/s, and after comparing AirSWOT backscatter and coherence data with ERA-5 wind speeds, we found that the minimum required speed to retrieve high backscatter and coherence is 3 m/s. We examined 11,072 lakes across Canada and Alaska, with sizes ranging from 350 m2 to 156 km2, significantly smaller than what could be measured with previous Ka-band instruments in orbit. We found that small lakes (0.0625–0.25 km2) have significantly lower backscatter (3–5 dB) and 0.20–0.25 lower coherence than larger lakes (>1 km2). These results suggest that approximately 75% of SWOT observable lake areas around the globe will have consistently high-accuracy water surface elevations, though seasonal wind variability should remain an important consideration. Despite very small lakes presenting lower average backscatter and coherence, this study asserts that SWOT will be able to accurately resolve the water surface elevations and water surface extents for significantly smaller water bodies than have been previously recorded from satellite altimeters. This study additionally lays the foundation for future high-resolution inland water wind speed studies using SWOT data, when the data become available, as the relationships between wind speed and Ka-band backscatter reflect those of traditional scatterometers designed for oceanic studies. [ABSTRACT FROM AUTHOR]

• Ratios of E-CHAIM model-to-RISR radar measured electron density are close to one at heights near F2 peak. • On average, E-CHAIM underestimates electron density at ionospheric topside and bottomside by ∼ 20 % • E-CHAIM underestimations are strongest in summer and equinoctial nighttime at bottomside and in autumn nighttime at topside. In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ∼ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak. [ABSTRACT FROM AUTHOR]

Lake ice thickness (LIT), a thematic product of lakes as an essential climate variable (ECV), is sensitive to changes in air temperature and on-ice snow mass. Here, a novel and efficient analytic method (retracking approach) is presented for the estimation of LIT from Ku-band (13.6 GHz) radar altimetry data. The new retracker, referred to as ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ , is based on the physical modeling of the conventional radar echoes (also called low-resolution mode or LRM) over ice-covered lakes that show a characteristic step-like feature in their leading edge attributed to the reflection of radar waves at the snow–ice and ice–water interfaces. The method is applied to Jason-2 and Jason-3 data acquired over Great Slave Lake, Canada, over three ice seasons (2013–2016). As expected, the agreement between the Jason-2 and Jason-3 LIT estimates over their overlapping period (2016 ice season) is excellent with a mean bias error of 0.013 m and root mean square error (RMSE) of 0.024 m. LIT estimates from ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ are in good agreement with simulations from a thermodynamic lake ice model and in situ measurements with RMSE values of the order of a few centimeters for the three winter seasons. The retracker also provides a robust way to assess the accuracy of LIT estimates which is in the order of 0.10 m when the ice cover is well established and prior to melt onset. In addition, ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ captures the seasonal transitions during the freeze-up and breakup periods and ice growth over different winter seasons, making it a promising method for monitoring inter-annual variability and trends in LIT from past and current conventional radar altimetry missions. [ABSTRACT FROM AUTHOR]

At high latitudes, the Sporadic‐E layer (Es layer) is a common phenomenon but is still poorly understood due to sparse measurements and the difficulty of conventional mechanisms to operate. In this study, an interesting case of polar cap Es layer is first studied by using the twin incoherent scatter radars (northward‐looking face of Resolute Incoherent‐Scatter Radar and Resolute Incoherent‐Scatter Radar‐Canada), a Canadian Advanced Digital Ionosonde, and a Magnetometer, all at Resolute, Canada. From several electron density profiles of the twin radars, the horizontal scale of the polar cap Es layer is found to be greater than 350 km. Moreover, the polar cap Es layer is determined to be drifting from the bottom F region (>150 km) to the lower E region. Furthermore, a unique appearance of double polar cap Es layers is observed. As a result, these peculiar signatures inspire a newly proposed process that involves the combination of localized electric fields and gravity waves. Plain Language Summary: The Sporadic‐E layer (Es layer) is a globally common phenomenon, which is comprehensively and unceasingly studied in decades by using the observation measurements and numerical simulations. The remarkable agreements on the characteristics and generation mechanisms of Es layer at middle latitudes have then been almost achieved. However, over the polar region, it is still poorly understood due to sparse measurements and the difficulty of conventional mechanisms to operate. In this study, an interesting case of polar cap Es layer are first reported by using the twin radars of northward‐looking face of Resolute Incoherent‐Scatter Radar and Resolute Incoherent‐Scatter Radar‐Canada, Canadian Advanced Digital Ionosonde, and Magnetometer simultaneously. Through comprehensively studies, the understanding of polar cap Es layer is clearly extended, not only on the characteristics but also on the mechanism processes. The polar cap Es layer is horizontally greater than 350 km; a new process on the generation mechanism is provoked including the functions of particle precipitation and gravity wave. As a consequence, we present a peculiar evidence for the first time to greatly enrich our knowledge on the polar cap Es layer, showing us a new insight on it. Key Points: An amazing example of polar cap Es layer is first presented by the twin radars of northward‐looking face of Resolute Incoherent‐Scatter Radar and Resolute Incoherent‐Scatter Radar‐Canada at Resolute, Canada simultaneouslyThe morphology of the polar cap Es layer is comprehensively furthered, interpreting the horizontal scale size (>350 km) and double layersTo reasonably explain this phenomenon, a new process is hypothesized, consisting of localized electric field and gravity wave [ABSTRACT FROM AUTHOR]

The performance of constant false alarm rate (CFAR) detectors is often severely degraded in clutter edge and under multiple target interference. CFAR detection in the above environments often uses generalised likelihood ratio method or mean ratio method to find out the clutter edge demarcation line and suppress the sharp increase of false alarm rate, or remove the interference and modify the threshold factor to suppress the interference and improve the detection performance, but this sacrifices the detection gain from the number of clutter samples. In this paper, the feature information is fused to construct feature vectors, and the edge location is judged by the modulus of the cross product of the feature vector pair (MCPFVP), this edge demarcation line detection method fusing with features can be implemented without the need of clutter statistical distribution information. In addition, this paper reconstructs the sea clutter masked by multiple target interference by fusing the sea clutter amplitude correlation information, and these reconstructed sea clutter samples are used for power estimation together with the unmasked sea clutter without changing the threshold factor. This method can not only suppress the target masking effect of multiple target interference as the censoring type CFAR detector, but also maintain the detection gain from the number of clutter samples, which is not possible with the traditional censoring type CFAR detector. In addition, the relative weighted ratio summation (RWRS) is proposed to detect the multiple target interference, which takes into account the asymmetry of the shape of the statistical distribution. Both simulated and real sea clutter data are used to validate the above methods. The measured data are obtained from radar data collected at Yantai Yangma Island, China, Darmouth, Canada and Grimsby, Canada. (The latter two datasets are collected by the IPIX radar - Ice Multiparameter Imaging X-Band Radar). [ABSTRACT FROM AUTHOR]

Electron density measured at high latitudes by the Swarm satellites is compared with the measurements by the RISR incoherent scatter radars as the satellites fly by the radars' field of views near Resolute Bay, Canada between 2014 and 2019. More than 200 satellite passes crossing multiple radar beams are considered. Overall, the Swarm-based electron densities are smaller than those measured by the radars by ∼30%. The values are closer to one another at electron densities between 3 10 10 and 15 1010 3 m, corresponding to plasma frequencies between 1.5 and 3.5 MHz. Swarm-measured values are getting progressively smaller than those measured by radars at larger electron densities/plasma frequencies. For the entire range of measured electron densities, the slope of the best fit linear line to the data expressed in terms of electron density is ∼0.62 and offset is 2 1010 3 m. Stronger differences between the instruments were found for observations at nighttime and dawn. [ABSTRACT FROM AUTHOR]

Tropospheric and lower‐stratospheric motions at mesoscales and larger are a mixture of waves and two‐dimensional (2‐D) turbulence. Determining their relative importance is necessary, since waves are capable of coordinated systematic momentum transport accompanying the wave propagation, and associated wind forcing, in ways that 2‐D turbulence is not. This can impact weather forecasting. Using a network of ten windprofiler radars in eastern Ontario and western Quebec in Canada, plus an additional one in the Arctic, the relative roles of internal gravity (buoyancy) waves and two‐dimensional turbulence are examined at temporal scales from about 3–4 hrs to several tens of hours (horizontal spatial scales of typically one or two hundred kilometres to a few thousand kilometres), with the purpose of investigating the respective roles of these two distinct characteristic fluid motions as functions of location, season and year. The emphasis is on studies of spectral slope variability, rather than absolute spectral magnitudes, giving a perspective not previously substantially presented. In particular, we have found a frequency band in which gravity‐wave Doppler shifting produces distinctly different spectral slopes than those predicted for 2‐D turbulence, and these differences are employed to distinguish the flow fields. The network used (excluding the Arctic site) covers an area of ∼106 km2 and includes a variety of different terrains. Radial velocities have been recorded on time scales of minutes for data lengths covering durations of up to 12 years. Altitude coverage is from 1 km to typically 14 km, at 500 m resolution. Results suggest a region from ∼2 to ∼5 km altitude (deeper for some radars) where waves are weaker and 2‐D turbulence appears to be generally more significant, but where occasional bursts of gravity‐wave activity can occur, while above typically 6–8 km, gravity waves increase in significance. There are distinct site‐to‐site variations. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Water Resources Journal / Revue Canadienne des Ressources Hydriques is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Canada's Earth-observing RADARSAT Constellation Mission (RCM) is intended to serve operational users. The users' main objectives were to have routinely available high-quality quantitative information about their applications, with large area coverage potential. That two-part requirement was sufficient to establish an innovative synthetic aperture radar (SAR) polarimeter's end-to-end system profile, the hybrid compact polarimetric (HCP) architecture. HCP's essential and defining characteristic is circularly polarized transmission. This is sufficient to evaluate the backscatterer Stokes vector, but only half of the scattering matrix elements are measured. Hence image classification methodologies for linearly polarized full- (or quad-) pol (FP) radars that depend on knowledge of all four of the scattering matrix elements if applied to HCP-derived data lead to erroneous results. HCP-appropriate classifications are based on the Stokes vector. Related methods traditionally used for radar astronomy—for which circularly polarized transmission is the norm—are reviewed. Those known methods are extended, bringing to light fundamental characteristics of a polarimetric electromagnetic field. Analysis tools appropriate for HCP's polarimetric data are introduced. The resulting polarimetric portraits—defined as the Stokes vector of the backscattered field in response to balanced illumination of the scene—from FP and HCP polarimeters are shown to be equivalent. [ABSTRACT FROM AUTHOR]

The Multi-Radar-Multi-Sensor (MRMS) system was transitioned into operations at the National Centers for Environmental Prediction in the fall of 2014. It provides high-quality and high-resolution severe weather and precipitation products for meteorology, hydrology, and aviation applications. Among processing modules, the radar data quality control (QC) plays a critical role in effectively identifying and removing various nonhydrometeor radar echoes for accurate quantitative precipitation estimation (QPE). Since its initial implementation in 2014, the radar QC has undergone continuous refinements and enhancements to ensure its robust performance across seasons and all regions in the continental United States and southern Canada. These updates include 1) improved melting-layer delineation, 2) clearance of wind farm contamination, 3) mitigation of corrupt data impacts due to hardware issues, 4) mitigation of sun spikes, and 5) mitigation of residual ground/lake/sea clutter due to sidelobe effects and anomalous propagation. This paper provides an overview of the MRMS radar data QC enhancements since 2014. [ABSTRACT FROM AUTHOR]

Weather radar provides real-time, spatially distributed precipitation estimates, whereas traditional gauge data are restricted in space. The use of radar quantitative precipitation estimates (QPEs) as an input of hydrological models for hydrometeorological applications has increased with the development of weather radar worldwide. New dual-polarization technology and algorithms are showing improvements to radar QPEs. This study evaluates radar QPEs from C-band radar at King City, Canada (WKR), and NEXRAD S-band radar at Buffalo, New York (KBUF), to verify the reliability and accuracy for operational use in the Humber River (semiurban) and Don River (urban) watersheds in the Greater Toronto Area (GTA), Canada. Twenty rainfall events that occurred from 2011 to 2017 were determined from hourly gauge measurements and compared with nine radar QPEs. Rain rates were estimated with different algorithms using three dualpolarized reflectivity values: horizontal reflectivity Z, differential reflectivity ZDR, and specific differential phase KDP. The correlation coefficient, bias, detection, and root-mean-square error were calculated and averaged over all events for each gauge station to show the spatial distribution and in a similar pattern to represent the variation by the event. The quality of the results in terms of accuracy and reliability indicates that the radar QPEs from KBUF S-band and WKR C-band multiparameter rain rate estimators can be effectively used as precipitation forcing of hydrological models for hydrometeorological applications. The high spatiotemporal resolution, long-term data archive, and good percent detection of radar QPEs can facilitate hydrometeorological applications by providing a continuous time series for hydrological models. [ABSTRACT FROM AUTHOR]

A novel method is proposed for identifying rain-contaminated regions in X-band marine radar images. Due to the difference of texture between rain-contaminated and rain-free echoes, a Gabor filter bank and discrete wavelet transform (DWT) are introduced to filter marine radar images and generate texture features. Feature vectors extracted from each pixel of the training samples are input into a clustering model, which is trained using unsupervised learning techniques such as k-means and a self-organizing map (SOM). After distinguishing between rain-free and raincontaminated clusters, the proposed method is able to cluster pixels into rain-free and rain-contaminated types automatically. Images collected from a shipborne marine radar in a sea trial off the east coast of Canada under rain conditions are utilized to validate the proposed method. Identification results obtained from several clustering models with different combinations of cluster number, texture features, and clustering methods show that rain-contaminated pixels are effectively detected, with an overall identification accuracy of 89.1% for both k-means-based (k = 4) and 2 × 2-neuron SOM-based clustering models. [ABSTRACT FROM AUTHOR]

In this article, an unsupervised clustering-based method for identifying rain-contaminated and low-backscatter regions in X-band marine radar images is presented. Rain blurs the wave signatures of radar images, and low-backscatter images caused by calibration errors or too-low wind speed contain little or no wave signatures. In both cases, ocean surface parameter measurement using X-band marine radar will be negatively affected. Four types of features can be extracted based on the distinct difference in texture and pixel intensity distribution between rain-free, rain-contaminated, and low-backscatter regions. Features extracted from each pixel are combined into a feature vector and mapped onto a $10\times 10$ -neuron self-organizing map (SOM). Then, the hierarchical agglomerative clustering algorithm is introduced, which clustered those neurons into three types (i.e., rain-free, rain-contaminated, and low-backscatter). The method is validated using the shipborne marine radar data collected on the East Coast of Canada. The good agreement between the pixel-based clustering results and manually segmented reference images indicates that both rain-contaminated and low-backscatter regions can be identified effectively using the proposed method. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Foreign Policy Journal (CFPJ) is the property of Routledge and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Spatial variability in snowpack properties negatively impacts our capacity to make direct measurements of snow water equivalent (SWE) using satellites. A comprehensive data set of snow microstructure (94 profiles at 36 sites) and snow layer thickness (9000 vertical profiles across nine trenches) collected over two winters at Trail Valley Creek, NWT, Canada, was applied in synthetic radiative transfer experiments. This allowed for robust assessment of the impact of estimation accuracy of unknown snow microstructural characteristics on the viability of SWE retrievals. Depth hoar layer thickness varied over the shortest horizontal distances, controlled by subnivean vegetation and topography, while variability in total snowpack thickness approximated that of wind slab layers. Mean horizontal correlation lengths of layer thickness were less than a metre for all layers. Depth hoar was consistently ∼30 % of total depth, and with increasing total depth the proportion of wind slab increased at the expense of the decreasing surface snow layer. Distinct differences were evident between distributions of layer properties; a single median value represented density and specific surface area (SSA) of each layer well. Spatial variability in microstructure of depth hoar layers dominated SWE retrieval errors. A depth hoar SSA estimate of around 7 % under the median value was needed to accurately retrieve SWE. In shallow snowpacks <0.6 m, depth hoar SSA estimates of ±5 %–10 % around the optimal retrieval SSA allowed SWE retrievals within a tolerance of ±30 mm. Where snowpacks were deeper than ∼30 cm, accurate values of representative SSA for depth hoar became critical as retrieval errors were exceeded if the median depth hoar SSA was applied. [ABSTRACT FROM AUTHOR]

The Canadian Department of National Defence (DND) is developing an experimental over-the-horizon radar (OTHR) with the potential for surveillance of Canada. Because of dynamically changing ionospheric conditions in the Earth’s high-latitude and polar regions, the operating OTHR transmission frequency and elevation angle need to be adjusted regularly to maintain constant illumination of downrange targets. In this paper, the feasible operating frequency and elevation angle radar parameters are determined for short- and long-range OTHR operation using 3-D ionosphere ray-tracing simulations. Together, the collection of all feasible radar configurations forms a characteristic profile which shifts and deforms as factors such as the time of day, season, and solar activity are varied. The range of operating frequencies and elevation angles obtained from this paper will aid developing the transmitter and receiver antenna layouts for experimental OTHR configurations in the poorly understood high-latitude and polar regions. These methods will also help to form the basis of the frequency monitoring systems (FMS) that will control the configuration of these polar OTHR systems in real time. [ABSTRACT FROM AUTHOR]

Clouds cover substantial parts of the Earth's surface and they are one of the most essential components of the global climate system impacting the Earth's radiation balance as well as the water cycle redistributing water around the globe as precipitation. Therefore, continuous observation of clouds is of primary interest in climate and hydrological studies. This work documents the first efforts in Italy in remote sensing clouds and precipitation using a combination of K- and W-band (24 and 94 GHz, respectively) radar profilers. Such a dual-frequency radar configuration has not been widely used yet, but it could catch on in the near future given its lower initial cost and ease of deployment for commercially available systems at 24 GHz, with respect to more established configurations. A field campaign running at the Casale Calore observatory at the University of L'Aquila, Italy, nestled in the Apennine mountain range is described. The campaign features are preceded by a review of the literature and the underpinning theoretical background that might help newcomers, especially in the Italian community, to approach cloud and precipitation remote sensing. This activity takes place in interesting time for radar sensing clouds and precipitation, stimulated both by the launch of the ESA/JAXA EarthCARE satellite missions scheduled in 2024, which will have on-board, among other instruments, a W-band Doppler cloud radar and the proposal of new missions using cloud radars currently undergoing their feasibility studies (e.g., WIVERN and AOS in Europe and Canada, and U.S., respectively).

The goal of this research was to improve wetland classification by fully exploiting multi-source remotely sensed data. Three distinct classifiers were designed to distinguish individual or compound wetland categories using random forest (RF) classification. They were determined, in part, to best use the available remotely sensed features in order to maximize that information and to maximize classification accuracy. The results from these classifiers were integrated according to Dempster−Shafer theory (D−S theory). The developed method was tested on data collected from a study area in Northern Alberta, Canada. The data utilized were Landsat-8 and Sentinel-2 (multi-spectral), Sentinel-1 (synthetic aperture radar—SAR), and digital elevation model (DEM). Classification of fen, bog, marsh, swamps, and upland resulted in an overall accuracy of 0.93 using the proposed methodology, an improvement of 5% when compared to a traditional classification method based on the aggregated features from these data sources. It was noted that, with the traditional method, some pixels were misclassified with a high level of confidence (>85%). Such misclassification was significantly reduced (by ~10%) by the proposed method. Results also showed that some features important in separating compound wetland classes were not considered important using the traditional method based on the RF feature selection mechanism. When used in the proposed method, these features increased the classification accuracy, which demonstrated that the proposed method provided an effective means to fully employ available data to improve wetland classification.

A heavy rainfall event over a 2-h period on 8 July 2013 caused significant flash flooding in the city of Toronto and produced 126 mm of rain accumulation at a gauge located near the Toronto Pearson International Airport. This paper evaluates the quantitative precipitation estimates from the nearby King City C-band dual-polarized radar (WKR). Horizontal reflectivity Z and differential reflectivity ZDR were corrected for attenuation using a modified ZPHI rain profiling algorithm, and rain rates R were calculated from R( Z) and R( Z, ZDR) algorithms. Specific differential phase KDP was used to compute rain rates from three R( KDP) algorithms, one modified to use positive and negative KDP, and an R( KDP, ZDR) algorithm. Additionally, specific attenuation at horizontal polarization A was used to calculate rates from the R( A) algorithm. High-temporal-resolution rain gauge data at 44 locations measured the surface rainfall every 5 min and produced total rainfall accumulations over the affected area. The nearby NEXRAD S-band dual-polarized radar at Buffalo, New York, provided rain-rate and storm accumulation estimates from R( Z) and S-band dual-polarimetric algorithm. These two datasets were used as references to evaluate the C-band estimates. Significant radome attenuation at WKR overshadowed the attenuation correction techniques and resulted in poor rainfall estimates from the R( Z) and R( Z, ZDR) algorithms. Rainfall estimation from the Brandes et al. R( KDP) and R( A) algorithms were superior to the other methods, and the derived storm total accumulation gave biases of 2.1 and −6.1 mm, respectively, with correlations of 0.94. The C-band estimates from the Brandes et al. R( KDP) and R( A) algorithms were comparable to the NEXRAD S-band estimates. [ABSTRACT FROM AUTHOR]

Copyright of Atmosphere -- Ocean (Taylor & Francis Ltd) is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article discusses the Coastal Marine Informatics (CMI) Initiative as a web-based resource for coastal and nearshore marine operations in Canada.

Copyright of Atmosphere -- Ocean (Taylor & Francis Ltd) is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: Height measurements from small-footprint discrete-return LiDAR and backscatter coefficients from C- and L-band radar were used independently and in combination to estimate above-ground component and total biomass for a coniferous temperate forest, located on Vancouver Island, British Columbia, Canada. Reference biomass data were obtained from plot-level data and used for comparison against the LiDAR and radar-based biomass models. For the LiDAR-only model, height metrics such as mean first return height and percentiles (e.g., 10th and 90th) of first returns correlated best to total above-ground and stem biomass. While percent of first returns above 2m and percentiles (75th and 90th) of first returns height metrics correlated best to crown biomass. A comparison between above-ground components and total biomass indicate that stem biomass displayed the highest relationship with the LiDAR measurements while crown biomass showed the lowest relationship with relative root mean squared error ranging from 16% to 22%, respectively. Alternatively, the radar-only models indicated that for C-band radar, a combination of HH and VV backscatter demonstrated the most significant correlation with forest biomass compared to coherence based models with a relative root mean squared error of 53%. For L-band radar, a combination of HH and HV backscatter showed the most significant correlation compared to coherence based models with a relative root mean squared error of 44%. Exploring a mixture of C- and L-band backscatter and coherence based models revealed that a combination of C-HV and L-HV coherence magnitudes provided the best radar relationship with forest biomass with a relative root mean squared error of 35%. Also for all radar-based models, L- and C-band backscatter and coherence magnitudes were poorly correlated with individual biomass components when compared to total above-ground biomass. The addition of C- and L-band backscatter and coherence variables to the LiDAR-only biomass model was also investigated. The results showed that the integration of C-band HH backscatter to the LiDAR-only model significantly improved the relationship with forest biomass by explaining an additional 8.9% and 6.5% of the variability in total aboveground and stem biomass respectively, while C-band polarimetric entropy explained an additional 17.9% of the variability in crown biomass. Improvements in the relative root mean squared errors were also observed ranging from 7.1% to 11.7%. The study suggests that for a temperate forest dominated by coniferous stands, the addition of C-band radar variables to a best LiDAR-only linear model provides improved estimates of above-ground component and total biomass. [Copyright &y& Elsevier]

Joint observations of the all-sky camera at Resolute Bay (Nunavut, Canada) and the Polar Dual Auroral Radar Network (PolarDARN) HF radars at Rankin Inlet and Inuvik (Canada) are considered to establish radar signatures of poleward moving polar cap arcs "detaching" from the auroral oval. Common features of the events considered are enhanced power or echo occurrence in the wake of the arcs and enhanced spectral width of these echoes. When the arcs were oriented along some of the radar beams, velocity reversals at the arc location were observed with the directions of the arc-associated flows corresponding to a converging electric field. For the event of 9 December 2007, two arcs were poleward progressing almost along the central beams of the Inuvik radar at the speed close to the E×B drift of the bulk of the F-region plasma as inferred from HF Doppler velocities and from independent measurements by the Resolute Bay ionosonde. In global-scale convection maps inferred from all Super Dual Auroral Radar Network (SuperDARN) radar measurements, the polar cap arcs were often seen close to the reversal line of additional mesoscale convection cells located poleward of the normal cells related to the auroral oval. [ABSTRACT FROM AUTHOR]

The potential of a random forest (RF) classifier for radar-only crop classifications was evaluated for an eastern and western Canadian site. Overall classification accuracies were improved by approximately 4%5% over traditional boosted decision trees with gains of up to 7% in the accuracies of specific classes. Accuracies above 85% were obtained for key crops including canola, soybeans, corn, and wheat. Variable importance measures generated by the RF classifier showed that the most important acquisitions occurred in late August to early September at peak biomass and after wheat harvest. The least important images were acquired in May and mid-July. The HV and VV polarizations had the most significant contributions, while the HH polarization contributed little throughout the season, except in late September when the HH response was largely driven by soil conditions. The sensitivity of three RF parameters (number of training pixels, number of trees, and number of variables to select from at each split) was evaluated and shown to have negligible influence on overall accuracy. The RF classifier provided large performance gains in terms of processing time relative to the decision tree classifier. The operational potential and implementation considerations for radar-only Canada-wide crop type mapping are discussed in the context of these results. [ABSTRACT FROM AUTHOR]

Copyright of Atmosphere -- Ocean (Taylor & Francis Ltd) is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Defence Research and Development Canada (DRDC) Atlantic has conducted many dedicated seakeeping and structural load trials on the Canadian Navy research ship CFAV Quest and on several Canadian Navy warships. Typically, wave buoys have been deployed to measure seaway wave characteristics; however, there has been an ongoing interest in evaluating shipboard wave measurement systems. These systems have some advantages over wave buoys for short-term trials and are needed for longer-term sea trials and to provide wave input data for tactical and real-time ship operator guidance systems. This paper presents some of our experiences with wave radar. In the last few years there have been significant advances in wave radar technology (systems that extract wave data from backscatter information contained in the video output of X-band navigational radar displays). Commercial "off-the-shelf" systems are now available. While there is evidence that these systems can provide reliable wave data from shore-based or stationary platform installations, it is DRDC's expenence on a ship moving in waves, that wave radars can give good direction and frequency measurements but less reliable wave heights. DRDC has developed a method to improve shipboard wave height measurement through fusion of wave radar data with measured ship motion response data. This paper discusses the development of the wave data fusion process, validated through previous sea trial data, and presents the results of a recent demonstration of the approach during a sea trial conducted on CFAV Quest in November/December 2008. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents some new concepts in the petroleum systems of the northern Labrador and southern Baffin Island offshore region of eastern Canada. The focus of this work is the region of the Hekja O-71 gas discovery of 1979 by Aquitaine, one of only five wells drilled between 1976 and 1980 within an area covering some 166,000 square kilometers within the Saglek Basin. This study emerged from a broad scale re-examination of the petroleum potential of this area “from the crust up” using regional reflection, refraction and potential field data. An opportunity to use SAR (synthetic aperture radar) data from the RADARSAT-1 Earth observation satellite was taken to incorporate alternative data sources to support this exploratory review and resource assessment. Examination of the final map of interpreted slick-like features on the sea surface, revealed a close correlation of some of these occurrences to several bathymetric features which have underlying seismic signatures similar to previously identified gas hydrate “pipes” or chimney anomalies as seen in data from offshore Nova Scotia and in the Irish Sea. Globally, many active marine hydrocarbon seeps appear on the seafloor as “pockmarks”; in this case no seafloor depressions were seen on conventional multi channel 2-D seismic data associated with active seepage. Instead, very distinct mound-like structures are seen associated with seeps at two locations east of Hudson Strait. The presence of significant cold water coral in close proximity to the active seepage sites may show a link between seafloor petroleum seepage and coral reef development similar to that observed offshore Norway. Close examination of the near surface seismic character led to the interpretation of what was originally seen as seismic noise in vintage data, as likely being fluid escape chimneys or gas pipes, along the eastern edge of the Hekja structural complex, where favourable hydrocarbon trapping conditions are present. No active seeps were seen there; this may be due to other factors, such as the nature of the fluids that are escaping or the possibility of self sealing activity by biological agents such as bacterial matting with associated carbonate hard-ground formation. One seep anomaly was noted relatively close to the major basaltic eruptive complex near the Gjoa G-37 well. This may be due to the presence of volcaniclastic- hosted hydrocarbons similar in style to those recently discovered at the Rosebank field in Paleocene volcanics in the Faroe-Shetland Basin. The occurrence of an active seep in a volcanically-dominated terrain raises the potential for a radical shift in accepted types of petroleum leads and where they may occur. The presence of apparent oil seepage versus the past history of finding only gas-prone accumulations is a strong indicator that a second, oil-prone petroleum system exists in the Saglek Basin. The signs of active petroleum systems as shown by oil seep anomalies with confirming seismic evidence of discrete sea floor structures in close proximity makes a compelling argument for re-examining these areas with an eye towards stratigraphic instead of structural plays. [Copyright &y& Elsevier]

A method for operational monitoring of a weather radar receiving chain, including the antenna gain and the receiver, is presented. The “online” method is entirely based on the analysis of sun signals in the polar volume data produced during operational scanning of weather radars. The method is an extension of that for determining the weather radar antenna pointing at low elevations using sun signals, and it is suited for routine application. The solar flux from the online method agrees very well with that obtained from “offline” sun tracking experiments at two weather radar sites. Furthermore, the retrieved sun flux is compared with data from the Dominion Radio Astrophysical Observatory (DRAO) in Canada. Small biases in the sun flux data from the Dutch and Finnish radars (between -0.93 and +0.47 dB) are found. The low standard deviations of these sun flux data against those from DRAO (0.14–0.20 dB) demonstrate the stability of the weather radar receiving chains and of the sun-based online monitoring. Results from a daily analysis of the sun signals in online radar data can be used for monitoring the alignment of the radar antenna and the stability of the radar receiver system. By comparison with the observations from a sun flux monitoring station, even the calibration of the receiving chain can be checked. The method presented in this paper has great potential for routine monitoring of weather radars in national and international networks. [ABSTRACT FROM AUTHOR]

A hierarchical typology for the channels and bars within aggradational wandering gravel-bed rivers is developed from an examination of a 50 km reach of lower Fraser River, British Columbia, Canada. Unit bars, built by stacking of gravelly bedload sheets, are the key dynamic element of the sediment transfer system, linking sediment transport during individual freshets to the creation, development and remoulding of compound bar platforms that have either a lateral or medial style. Primary and secondary unit bars are identified, respectively, as those that deliver sediment to compound bars from the principal channel and those that redistribute sediment across the compound bar via seasonal anabranches and smaller channels. The record of bar accretion evident in ground-penetrating radar sequences is consistent with the long-term development of bar complexes derived from historical aerial photographs. For two compound bars, inter-annual changes associated with individual sediment transport episodes are measured using detailed topographic surveys and longer-term changes are quantified using sediment budgets derived for individual bars from periodic channel surveys. Annual sediment turnover on the bars is comparable with the bed material transfer rate along the channel, indicating that relatively little bed material bypasses the bars. Bar construction and change are accomplished mainly by lateral accretion as the river has limited capacity to raise bed load onto higher surfaces. Styles of accretion and erosion and, therefore, the major bar form morphologies on Fraser River are familiar and consistent with those in gravelly braided channels but the wandering style does exhibit some distinctive features. For example, 65-year histories reveal the potential for long sequences of uninterrupted accretion in relatively stable wandering rivers that are unlikely in braided rivers. [ABSTRACT FROM AUTHOR]

Ice scouring of lake and sea-floor substrates by the keels of drifting ice masses is a common geological process in modern northern lakes and continental shelves, and was widespread during the Pleistocene. Nonetheless, the importance of scouring as a geological process is not yet matched by many sedimentological studies of scour structures exposed in outcrop. This article presents an integrated study combining outcrop sedimentology and subsurface ground-penetrating radar (GPR) data from a relict late Pleistocene ice-scoured glacial lake floor now preserved below beach sediments in Ontario, Canada. Scours occur along a regressive sequence boundary where deep-water muddy facies are abruptly overlain by shallow-water sands resulting from an abrupt drop in water levels. This has allowed the keels of drifting ice masses to scour into muds. Three-dimensional data gained from the GPR survey show that scours are as much as 2.5 m deep and 7 m wide; they have berms of displaced sediment and are oriented parallel to the former shoreline. Scoured shoreface sediments that fill scours show abundant liquefaction structures, indicating substrate dewatering during repeated scouring events similar to that recently reported in the modern Beaufort Sea in Canada's far north. Marked changes in water depths are typical of glacially influenced lakes and seas, creating opportunities for drifting ice to scour into offshore muddy cohesive facies and be preserved. The data presented here may aid identification in ancient successions elsewhere. [ABSTRACT FROM AUTHOR]

This article discusses the determination of snow water equivalent by acoustic impulse of snowpacks in Saskatchewan and British Columbia, Canada. Depth and density of snow layers was estimated by seismological techniques and frequency-modulated continuous wave radar. This method also estimates the tortuosity of snow. The authors compared the acoustic sounding method with gravimetric sampling to determine snow water equivalent. According to the authors, correlation variations were primarily found with higher water contents and in areas where multiple layers were found.

1. The size of lakes and the size distribution of lakes are important parameters controlling lake function, and how lakes interact with landscapes, the atmosphere and ecosystems. A baseline digital database of lakes could be used to improve understanding of lake function, to extrapolate lake information to regional and global scales, and as a basis for detecting future changes to lakes. 2. This paper examines the capabilities of synthetic aperture radar (SAR) imagery produced by the Japanese Earth Resources Satellite (JERS-1) to map the number and size distribution of lakes in western Arctic Canada, Central Canada and the Pantanal (Brazil). 3. For the Arctic and Pantanal, the total area found within one lake size category increases towards smaller lakes. The opposite was true for the area in Central Canada. The number of lakes in the smallest size category, 0.01 to 0.1 km2, was underestimated for all regions owing to the resolution of the mosaics - 100 × 100m. The number of large lakes in the Pantanal was over-estimated through confusion with intermittent floodways that are scrubby grasslands and bare sand in the dry season and which exhibit low backscattering and therefore appear dark like lakes. 4. The lake distributions were combined with existing data to produce preliminary regional estimates of carbon accumulation. Lakes may accumulate as much as 1.7 and 1.3 t C km-2 yr-1 for the Arctic Canadian and Central Canadian areas, respectively. No estimates were produced for the Pantanal because there are no applicable data on carbon accumulation rates available for that region. [ABSTRACT FROM AUTHOR]

A physically based method is developed to estimate the microphysical structure of the melting layer in stratiform rain using airborne observations by a dual-frequency radar and a 10.7-GHz radiometer. The method employs a nonlinear optimal estimation approach to find two parameters of the gamma drop size distribution (DSD) at each radar range gate from the Ku/Ka-band reflectivities. The DSD profile is used to determine the atmospheric absorption/extinction profile, which enables the surface contribution to the measured brightness temperature to be estimated. The surface wind speed is estimated from the surface emissivity by inverting the forward model, which relates the two. Retrievals in stratiform precipitation require a model to describe the thermodynamic and electromagnetic properties of melting hydrometeors. The melting layer can contribute a majority of the total atmospheric absorption, making it a key component for accurate retrievals in stratiform rain. Several melting layer models were evaluated based on their fit to the dual-frequency reflectivity measurements in the melting layer. A candidate model is selected and tuned to match the radar measurements. The melting layer model is then incorporated into the full forward model for the brightness temperature observed by the radiometer. The surface wind speed assumed in the forward model is forced by the radiometer observations. If the actual surface wind speed is known, this approach provides a powerful constraint on the possible melting layer model. A case study is presented from an airborne campaign over areas of precipitation off the coast of Vancouver Island, British Columbia, Canada. The estimated wind speeds are found to be uncorrelated with the reflectivity and their average value is within 1 m s-1 of that retrieved in a clear area adjacent to the rain. [ABSTRACT FROM AUTHOR]

Turbulence inhomogeneities at 3-m scales can be either isotropic or anisotropic, and the degree of anisotropy can be measured with VHF wind profiler radars. Studies over a period of two years in Montreal, Quebec, Canada, have shown that for this site during nonwinter months, the occurrence of isotropic turbulence at 3-m scales serves as a useful diagnostic for the occurrence of rainfall. Turbulent eddies are expected to be most isotropic when wind shears are weak and the atmosphere is either unstable or close to instability. The measurements show that when the turbulence is most isotropic, rainfall is very common. Furthermore, the development of quasi-isotropic turbulence usually occurs before the onset of precipitation. Lead times are typically of the order of 1 to 6 h. Correlation coefficients between the occurrence of strong isotropy and the development of rain generally exceed 0.6, and can be as high as 0.7. Further studies will be required to determine whether this phenomenon is specific to the Montreal area, or can be applied to other locations as well. [ABSTRACT FROM AUTHOR]

The Mid-Canada Radar Line (MCRL) was built during the 1950s in response to the perceived threat of a Soviet nuclear attack over the Arctic. The MCRL was an entirely Canadian project, consisting of 98 radar stations that stretched across the 55th parallel from Dawson Creek, British Columbia, to Hopedale, Labrador. Seventeen MCRL sites were located in Ontario, and by 1965, all had been closed for strategic and economic reasons. Since these sites were improperly decommissioned, they have become point sources of contaminants in northern Canada. In 2001, MCRL Site 050 was remediated. The Fort Albany First Nation (located near Site 050), the Department of National Defence, and the Ontario Ministry of Natural Resources had formed a "partnership" to undertake this. We determined that from an Aboriginal perspective, a true partnership (as we define it) did exist between these organizations; a partnership based on the essential elements of respect, equity, and empowerment. We show that these cornerstones of a true partnership were present in the initial documents that discussed remediation of this site. This evaluation will provide insight, guidance, and a potential framework to benefit future partnership endeavours, helping to foster stronger collaborative relationships between Aboriginal organizations and governments at all levels, especially with respect to the remediation of abandoned radar line sites. [ABSTRACT FROM AUTHOR]

The objectives of this research study was to evaluate the spatiotriangulation applied to multisensor satellite images, which enabled the simultaneous geometric processing of a large number of images and strips together to reduce the control point requirement. The spatiotriangulation is based on the three-dimensional physical models developed for multisensor images at the Canada Centre for Remote Sensing, Natural Resources Canada and on a least squares block bundle adjustment process with orbital constraints. The spatiotriangulation was applied to 49 images in six blocks (Landsat-7 ETM+, panchromatic SPOT-4 HRV, multiband ASTER, multinode radar RADARSAT-1, and ERS-1) acquired over the Rocky Mountains, Canada, from different viewing/look angles. The first results of least squares block bundle adjustments showed that the same error residuals (around 20 m) were obtained with the different image blocks whether independently or simultaneously processed. In addition to ground control points (GCPs), elevation tie points (ETPs), with a known elevation value, instead of normal tie points were used in the overlaps because the viewing/look-angle differences of overlapping images were generally small (8°). The second and most important results were related to simultaneous bundle adjustments of the largest "master" Landsat-7 block (600 km x 500 km) using 25 GCPs in the two outer strips and the smallest "slave" block(s) using no GCP but only ETPs. The errors, verified by a large number of independent check points (ICPs) in the "slave" blocks, were between 15-35 m (1.5-2 resolutions), depending on the "slave" block. However, the combined image pointing and map errors of ICPs (25-30 m) are included in these 15-35-m error results, and the internal accuracy of the blocks should, thus, be better (around one resolution). The research study demonstrated, thus, the possibility to use the largest block with a reduced number of GCPs to simultaneously adjust single image(s)/strip(s) or smallest block(s) with only ETPs, and with no degradation in the accuracy. [ABSTRACT FROM AUTHOR]

The seasonal transition of the boreal forest between frozen and non-frozen conditions affects a number of ecosystem processes that cycle between winter dormant and summer active states. The relatively short Ku-band wavelength (2.14 cm) of the space-borne NASA scatterometer (NSCAT) is sensitive to changes in dielectric properties, associated with large-scale changes in the relative abundance and phase (frozen or thawed) of canopy and surface water. We used a temporal change detection analysis of NSCAT daily radar backscatter measurements to characterize the 1997 seasonal spring thaw transition period across the 106 km2 BOREAS study region of central Canada. In the spring, air temperature transitions from frozen to non-frozen conditions and surface observations of seasonal snow cover depletion were generally coincident with decreases in radar backscatter of more than 2.9 dB, regardless of regional landcover characteristics. We used a temporal classification of NSCAT daily differences from 5-day smoothed backscatter values to derive three simple indices describing the initiation, primary event and completion of the spring thaw transition period. Several factors had a negative impact on the relative accuracy of NSCAT-based results, including periodic gaps in NSCAT daily time-series information and a large (i.e., >2 cm day−1) spring rainfall event. However, these results were generally successful in capturing the seasonal transition of the region from frozen to non-frozen conditions, based on comparisons with regional weather station network information. These results illustrate the potential for improved assessment of springtime phenology and associated ecosystem dynamics across high latitude regions, where field based and optical remote-sensing methods are substantially degraded by frequent cloud cover, low solar illumination and sparse surface weather station networks. [Copyright &y& Elsevier]

Single-hole radar reflection and cross-hole radar tomography surveys have been used to assist in characterizing a 105-m3 block of granite rock at AECL''s Underground Research Laboratory (URL) in southeast Manitoba, Canada. The surveys were conducted in a series of seven boreholes drilled in moderately fractured granite rock from the URL 240 meter level. The RAMAC borehole radar system with rated dipole antenna frequencies of 22 and 60 MHz was used for these surveys. Results of single-hole radar reflection surveys revealed several linear reflectors and hyperbolic diffractions events. Some of the linear reflectors were interpreted to be reflections from fracture planes; others were from boreholes near or within the survey area. The hyperbolic diffractions are from point reflectors related to discrete vertical fractures or inhomogeneities in the rock. The 60-MHz surveys provided high-resolution reflection records and detected reflectors up to 50 m away from the boreholes. Compared to 60-MHz surveys, the 22-MHz reflection data showed marked decrease in resolution but considerable increase in probing-range (∼100 m). Both the 22- and 60-MHz surveys were able to detect water-saturated discrete fractures and fracture zones a few centimeters thick. Reflections from the HQ size (96-mm diameter) boreholes were also detected in both the 22- and 60-MHz reflection surveys. The radar velocities in the Moderately Fractured Rock (MFR) study block varied from 105 to 125 m/μs, which translates to a total velocity variation of 8–10% in the URL granite (with average velocity 120 m/μs). Results from borehole radar surveys were compared with core log data and hydraulic test results from the boreholes. The single-hole reflection data correlate well with fractures and fracture zones observed in the core logs. Combined interpretation identified low dipping fracture zones (with 10–30° dip) and two sets of subvertical fractures trending northeast and southwest. In addition, the radar velocity images from tomographic surveys show good correlation with the geologic model reconstructed from core log data. Above-average radar velocities correlate with more competent rock and lower velocities with more fractured rock. The tomography interpretations are also consistent with transmissivity values from hydraulic tests in the boreholes. The regions of low radar velocity anomalies correspond to transmissivity values of 1×10−6–1×10−8 m2/s in the boreholes, and high radar velocities to transmissivity values of 10−12–10−13 m2/s. In addition, the lower radar velocities correlate with increase in permeability as observed from groundwater flow measurements (e.g. 22 l/min in borehole MF12) and higher radar velocities corresponding to lower groundwater flow rates (e.g. 0.5–0.8 l/min in borehole MF6). [Copyright &y& Elsevier]

Presents information on a study which examined the use of radar in assessing populations and habitat associations of marbled murrelets in Vancouver Island, British Columbia. Background on marbled murrelets; Methodology; Results of the study.

Copyright of Atmosphere - Ocean (Canadian Meteorological & Oceanographic Society) is the property of Canadian Meteorological & Oceanographic Society and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The increasing frequency of flooding worldwide has driven research to improve near real-time flood mapping from remote-sensing data. Improved automation and processing speed to map both open water and vegetated area flooding have resulted from these research efforts. Despite these achievements, flood mapping in urban areas where a significant number of overall impacts are felt remains a challenge. Near real-time data availability, shadowing caused by manmade infrastructure, spatial resolution, and cloud cover inhibiting optical transmission, are all factors that complicate detailed urban flood mapping needed to inform response efforts. This paper uses numerous data sources collected during two major flood events that impacted the same region of Eastern Canada in 2017 and 2019 to test different urban flood mapping approaches presented as case studies in three separate urban boroughs. Cloud-free high-resolution 3 m PlanetLab optical data acquired near peak-flood in 2019 were used to generate a maximum flood extent product for that year. Approaches using new Lidar Digital Elevation Models (DEM)s and water height estimated from nineteen RADARSAT-2 flood maps, point-based flood perimeter observations from citizen geographic information, and simulated traffic camera or other urban sensor network data were tested and verified using independent data. Coherent change detection (CCD) using multi-temporal Interferometric Wide (IW) Sentinel-1 data was also tested. Results indicate that while clear-sky high-resolution optical imagery represents the current gold standard, its availability is not guaranteed due to timely coverage and cloud cover. Water height estimated from 8 to 12.5 m resolution RADARSAT-2 flood perimeters were not sufficiently accurate to flood adjacent urban areas using a Lidar DEM in near real-time, but all nineteen scenes combined captured boroughs that flooded at least once in both flood years. CCD identified flooded boroughs and roughly captured their flood extents, but lacked timeliness and sufficient detail to inform street-level decision-making in near real-time. Point-based flood perimeter observation, whether from in-situ sensors or high-resolution optical satellites combined with Lidar DEMs, can generate accurate full flood extents under certain conditions. Observed point-based flood perimeters on manmade features with low topographic variation produced the most accurate flood extents due to reliable water height estimation from these points. [ABSTRACT FROM AUTHOR]

The article discusses the cross-polarized marine radar system being developed by the Canadian Coast Guard (CCG), Transport Canada (TC) and other government agencies that can detect small icebergs in January 2011. It says that the system can help differentiate between the less dangerous first-year ice and multi-year ice. According to the author, the project is currently integrating the horizontal polarization (HH) and the vertically-polarized antenna set to receive-only (HV). The dangers posed by multi-year ice and iceberg fragments are also discussed.

Wetlands play a key role in regional and global environments, and are critically linked to major issues such as climate change, wildlife habitat, biodiversity, water quality protection, and global carbon and methane cycles. Remotely-sensed imagery provides a means to detect and monitor wetlands on large scales and with regular frequency. In this project, methodologies were developed to classify wetlands (Open Bog, Treed Bog, Open Fen, Treed Fen, and Swamps) from multi-source remotely sensed data using advanced classification algorithms. The data utilized included multispectral optical and thermal data (Landsat-5) and Radar imagery from RADARSAT-2 and Sentinel-1. The goals were to determine the best way to combine the aforementioned imagery to classify wetlands, and determine the most significant image features. Classification algorithms investigated in this study were Naive Bayes, K-Nearest Neighbor (K-NN), Support Vector Machine (SVM), and Random Forest (RF). Based on the test results in the study area in Northern Ontario, Canada (49°31′.34N, 80°43′37.04W), a RF based classification methodology produced the most accurate classification result (87.51%). SVM, in some cases, produced results of comparable or better accuracy than RF. Our work also showed that the use of surface temperature (an untraditional feature choice) could aid in the classification process if the image is from an abnormally warm spring. This study found that wetlands were best classified using the NDVI (Normalized Difference Vegetative Index) calculated from optical imagery obtained in the spring months, radar backscatter coefficients, surface temperature, and ancillary data such as surface slope, computed through either an RF or SVM classifier. It was also found that preselection of features using Log-normal or RF variable importance analysis was an effective way of identifying low quality features and to a lesser extent features which were of higher quality. [ABSTRACT FROM AUTHOR]