Search

The Advanced X-ray Imaging Satellite (AXIS) promises revolutionary science in the X-ray and multi-messenger time domain. AXIS will leverage excellent spatial resolution (<1.5 arcsec), sensitivity ( 80 × that of Swift), and a large collecting area (5–10× that of Chandra) across a 24-arcmin diameter field of view at soft X-ray energies (0.3–10.0 keV) to discover and characterize a wide range of X-ray transients from supernova-shock breakouts to tidal disruption events to highly variable supermassive black holes. The observatory's ability to localize and monitor faint X-ray sources opens up new opportunities to hunt for counterparts to distant binary neutron star mergers, fast radio bursts, and exotic phenomena like fast X-ray transients. AXIS will offer a response time of <2 h to community alerts, enabling studies of gravitational wave sources, high-energy neutrino emitters, X-ray binaries, magnetars, and other targets of opportunity. This white paper highlights some of the discovery science that will be driven by AXIS in this burgeoning field of time domain and multi-messenger astrophysics. This White Paper is part of a series commissioned for the AXIS Probe Concept Mission; additional AXIS White Papers can be found at the AXIS website. [ABSTRACT FROM AUTHOR]

A plane-symmetric optical system with a two-dimensional field light source, such as a soft X-ray and vacuum ultraviolet optical system, is widely used for synchrotron radiation source devices, microscopes and so on. Therefore, this paper studied third-order intrinsic aberration modification with second-order accuracy transfer of pupil coordinates and extrinsic aberration of these kinds of optical systems. First, we discuss the extrinsic aberration calculation method and derive the corresponding aberration expressions; in addition, we apply optical geometric relations and the polynomial fitting method to obtain a second-order accuracy transfer relationship expression of the pupil coordinates between adjacent optical surfaces and derived the modification calculation expressions of the intrinsic aberration caused by the above factor. Finally, the third-order intrinsic aberration modification with second-order accuracy transfer of pupil coordinates and extrinsic aberration expressions derived in this paper are applied to calculate ray spot diagrams of two soft X-ray and vacuum ultraviolet optical systems with meridional and sagittal field angle light sources, and these results are compared with those obtained from the ray-tracing software Shadow; this showed that the calculation accuracy of the aberration expressions is sufficient. [ABSTRACT FROM AUTHOR]

This paper proposes an array structure with multidirectional remanent magnetization based on hard-magnetic soft materials, which can be used as a soft switch array on planar and curved surfaces. We firstly investigate the displacement response of a hard-magnetic soft switch which is excited by a magnetic field, and related to the magnitude and direction of the magnetic field. When the remanent magnetization direction of the soft switch is opposite to the horizontal component of the magnetic field, the displacement response is greater than that of the driving magnetic field in other directions. The maximum displacement of the soft switch can reach 4.5 mm under a 6 V driving voltage applied to the Helmholtz coil. We further design 2 × 2 and 3 × 3 switch arrays and the circuit structures of the switch arrays. The switch arrays are fabricated, and the displacement responses of the switch arrays under different driving magnetic fields on planar and curved surfaces are finally demonstrated. When the Z-axis displacement of the device reaches more than 3 mm, the LED light can be switched on. The hard-magnetic soft switch array structure designed in this paper can enable the application of soft switches in curved environments, verifying the feasibility of the application of hardmagnetic soft switch arrays. It is expected to provide a guidance for the design and manufacturing of multi-functional hard-magnetic soft switches in the future and the application of hard-magnetic soft switch arrays in planar and curved environments. [ABSTRACT FROM AUTHOR]

Large-bandwidth pulses produced by cutting-edge X-ray free-electron lasers (FELs) are of great importance in research fields like material science and biology. In this paper, a new method to generate high-power ultrashort FEL pulses with tunable spectral bandwidth with spectral coherence using a dielectric-lined waveguide without interfering operation of linacs is proposed. By exploiting the passive and dephasingless wakefield at terahertz frequency excited by the beam, stable energy modulation can be achieved in the electron beam and large-bandwidth high-intensity soft X-ray radiation can be generated. Three-dimensional start-to-end simulations have been carried out and the results show that coherent radiation pulses with duration of a few femtoseconds and bandwidths ranging from 1.01% to 2.16% can be achieved by changing the undulator taper profile. [ABSTRACT FROM AUTHOR]

The Earth's magnetosheath and cusps are the sources of soft X‐rays. In the accompanying paper (Part 1) and this paper, we discuss the methods of finding the magnetopause position by analyzing the X‐ray images. We use the software developed for the Soft X‐ray Imager (SXI) on board the forthcoming Solar wind Magnetosphere Ionosphere Link Explorer (SMILE) mission. We show how to find the maximum SXI count rate in noisy count maps. We verify the assumption that the maximum of the X‐ray emissivity integrated along the Line‐of‐Sight (Ix) is tangent to the magnetopause. We consider two cases using two MHD models and apply different methods of magnetospheric masking. Overall, the magnetopause is located close to the maximum Ix gradient or between the maximum Ix gradient and the maximum Ix depending on the method used. But since the angular distance between the maximum Ix gradient and the maximum Ix is relatively small (about 3°), the maximum Ix might be used as an indicator of the outer boundary of a wide magnetopause layer usually obtained in MHD simulations. Plain Language Summary: This is the second of two papers presenting the techniques to estimate the Earth's magnetopause location (the outer boundary of the magnetosphere) under the impact of the highly dynamic solar wind. Our knowledge of the overall shape of the magnetopause will be vastly improved when we start using X‐ray imagers to monitor large areas around this boundary as the solar wind varies. In this second paper of the series, we make use of the X‐ray emissions in the vicinity of the Earth simulated in the first paper for two case studies with vastly different incoming solar wind conditions. Here we examine different methods of how to extract the magnetopause shape and position from X‐ray maps of the type that will be returned by the X‐ray imager due to flying on the SMILE mission. Key Points: Different methods of finding the location and shape of the magnetopause from X‐ray images give consistent resultsMaximum integrated emissivity indicates the outer boundary of the magnetopauseThis work is made in preparation for the forthcoming Solar wind Magnetosphere Ionosphere Link Explorer mission [ABSTRACT FROM AUTHOR]

In this paper, we report on a systematic study of a soft X-ray Gas Electron Multiplier (GEM) detector built with aluminium-clad kapton GEM foils. The primary objective of this research is to comprehend the performance of this type of detector when irradiated with soft energy photons. The results are analysed and discussed with a particular focus on the long-term detector stability, as well as its gas gain and energy resolution uniformity across the detector area. Presented results lead us to the conclusion that the aluminium based GEM detector is a promising device to suppress the X-ray Fluorescence (XRF) background, simultaneously providing very good stability during long-term measurement campaigns. [ABSTRACT FROM AUTHOR]

Since the discovery of the cosmic X-ray background (CXB), astronomers have strived to understand the accreting supermassive black holes (SMBHs) contributing to its peak in the 10-40 keV band. Existing soft X-ray telescopes could study this population up to only 10 keV, and, while NuSTAR (focusing on 3-24 keV) made great progress, it also left significant uncertainties in characterizing the hard X-ray population, crucial for calibrating current population synthesis models. This paper presents an in-depth analysis of simulations of two extragalactic surveys (deep and wide) with the High-Energy X-ray Probe (HEX-P), each observed for 2 Ms. Applying established source detection techniques, we show that HEX-P surveys will reach a flux of ~10-15 erg s-1 cm-2 in the 10-40 keV band, an order of magnitude fainter than current NuSTAR surveys. With the large sample of new hard X-ray detected sources (~2000), we showcase HEX-Ps ability to resolve more than 80% of the CXB up to 40 keV into individual sources. The expected precision of HEX-Ps resolved background measurement will allow us to distinguish between population synthesis models of SMBH growth. HEX-P will leverage accurate broadband (0.5-40 keV) spectral analysis and the combination of soft and hard X-ray colors to provide obscuration constraints even for the fainter sources, with the overall objective of measuring the Compton-thick fraction. With unprecedented sensitivity in the 10-40 keV band, HEX-P will explore the hard X-ray emission from AGN to flux limits never reached before, thus expanding the parameter space for serendipitous discoveries. Consequently, it is plausible that new models will be needed to capture the population HEX-P will unveil. [ABSTRACT FROM AUTHOR]

In the present paper, we apply a blind fitting algorithm to model two-dimensional energy-incidence angle maps of soft x-ray resonant reflectivity measured in nanoscale epitaxial multilayers of multiferroic ε-Fe2O3 grown by pulsed laser deposition. The possibility of fitting the spectral shape of the complex refraction index across the Fe L3 absorption edge without having an initial guess about the optical constants has been demonstrated. The spectral shape fitting of the real (f1) and imaginary (f2) parts of the atomic scattering factor has been carried out by using a specially designed software utilizing OpenCL fast calculations on graphical processing units. The Kramers-Kronig relations between f1 and f2 are automatically taken into account by the fitting algorithm. A reasonable agreement between blindly generated and reference scattering factor spectra derived independently from an x-ray absorption spectroscopy experiment has been demonstrated. The blind fitting has been compared with the alternative refinement routines, in which small free variations of the reference spectral shapes (or no variations at all) have been allowed. The presented approach to the resonant x-ray reflectometry modeling makes it unnecessary to acquire the optical constant spectral shapes in advance and, thus, is especially helpful when such spectra cannot be physically measured, e.g., for a buried layer of a multilayer system. [ABSTRACT FROM AUTHOR]

The paper presents developments and significant improvements of the soft X-ray measurement system installed at the WEST tokamak. In the introduction, a brief discussion is carried out in the scope of energy shortage, fusion energy as a remedy, and the necessity of impurities monitoring in the scope of stable and long plasma discharge. This requires high-speed and accurate measurement systems due to the intense data streams that need to be processed online. For that reason, the SXR GEM FPGA-based system was designed by the Institute of Electronic Systems of the Warsaw University of Technology, the Institute of Plasma Physics and Laser Microfusion from Warsaw, and installed at the WEST tokamak in collaboration with the Institute for Magnetic Fusion Research, Commissariat à l'Énergie Atomique. It is the second-generation system, whereas the first was installed at JET tokamak. The article describes the architecture of the designed electronic part of the system. The paper presents an entirely new approach for the data concentration module implemented in FPGA. The main premise is to select only active data and send them chronologically to the embedded computer with high throughput. It is the essential component for long-term plasma operations, about 1 min, now carried out at WEST tokamak during the C3 campaign. The paper describes the laboratory tests under the exploitation of various radiation sources and the implementation of the solution and measurements during tokamak plasmas. Previous and current data acquisition methods are compared. The results show that implementing a new local trigger has significantly improved the system performance compared to the global trigger-based acquisition. The results are approximately 17 times better in the scope of performance and more than 20 times better in terms of data compression. The described design was successfully applied during the most recent 2023 experimental campaign at the WEST tokamak. [ABSTRACT FROM AUTHOR]

In our earlier study (Paper I) of this series, we examined the hemispheric sign preference (HSP) of magnetic helicity flux dH/dt across photospheric surfaces of 4802 samples of 1105 unique active regions (ARs) observed during solar cycle 24. Here, we investigate any association of the HSP, expressed as a degree of compliance, with flaring activity, analyzing the same set of dH/dt estimates as used in Paper I. The AR samples under investigation are assigned to heliographic regions (HRs) defined in the Carrington longitude–latitude plane with a grid spacing of 45° in longitude and 15° in latitude. For AR samples in each of the defined HRs, we calculate the degree of HSP compliance and the average soft X-ray flare index. The strongest flaring activity is found to be in one distinctive HR with an extremely low-HSP compliance of 41% as compared to the mean and standard deviation of 62% and 7%, respectively, over all HRs. This sole HR shows an anti-HSP (i.e., <50%) and includes the highly flare-productive AR NOAA 12673, however this AR is not uniquely responsible for the HR's low HSP. We also find that all HRs with the highest flaring activity are located in the southern hemisphere, and they tend to have lower degrees of HSP compliance. These findings point to the presence of localized regions of the convection zone with enhanced turbulence, imparting a greater magnetic complexity and a higher flaring rate to some rising magnetic flux tubes. [ABSTRACT FROM AUTHOR]

When first introduced, single-photon counting detectors reshaped crystallography at synchrotrons. Their fast readout speed enabled, for example, shutter-less data collection and fine slicing of the rotation angle and boosted the development of new experimental techniques like ptychography. Under optimal conditions, single-photon counting detectors provide an unlimited dynamic range with image noise only limited by the Poisson statistics of the incoming photons. Counting the pulses from individual photons, essentially what made the detectors so successful, also causes the main drawback, which is the loss of efficiency at high photon fluxes due to pulse pileup in the analog front end. To fully take advantage of diffraction-limited light sources, the next-generation single-photon counters need to improve their count rate capabilities in the same order of magnitude as the increased flux. Moreover, fast frame rates (a few kHz) are required to cope with the shorter dwell time achievable, thanks to the higher flux. Detector architecture with multiple comparators and counters can open new possibilities for energy-resolved imaging, while interpixel communication can overcome the issues arising from charge sharing and reduce the loss of efficiency at the pixel corners. Coupling single-photon counting detectors to high-Z sensors for hard X-ray detection (> 20 keV) and to low-gain avalanche diodes (LGADs) for soft X-rays is also necessary to make use of the increased coherence of the new light sources over the full radiation spectrum. In this paper, we present possible strategies to improve the performance of single-photon counting detectors at the fourth-generation synchrotron sources and compare them to charge integrating detectors. [ABSTRACT FROM AUTHOR]

Multimodal imaging and spectroscopy like concurrent scanning transmission X-ray microscopy (STXM) and X-ray fluorescence (XRF) are highly desirable as they allow retrieving complementary information. This paper reports on the design, development, integration and field testing of a novel in situ atomic force microscopy (AFM) instrument for operation under high vacuum in a synchrotron soft X-ray microscopy STXM–XRF end-station. A combination of μXRF and AFM is demonstrated for the first time in the soft X-ray regime, with an outlook for the full XRF–STXM–AFM combination. [ABSTRACT FROM AUTHOR]

The launch of the IXPE telescope in late 2021 finally made polarization measurements in the 2– 8 keV band a reality, more than 40 years after the pioneering observations of the OSO-8 satellite. In the first two years of operations, IXPE targeted more than 60 sources, including four magnetars, neutron stars with magnetic fields in the petaGauss range. In this paper we summarize the IXPE main findings and discuss their implications for the physics of ultra-magnetized neutron stars. Polarimetric observations confirmed theoretical predictions, according to which X-ray radiation from magnetar sources is highly polarized, up to ≈ 80 % , the highest value detected so far. This provides an independent confirmation that magnetars are indeed endowed with a super-strong magnetic field and that the twisted magnetosphere scenario is the most likely explanation for their soft X-ray emission. Polarization measurements allowed us to probe the physical conditions of the star's outermost layers, showing that the cooler surface regions are in a condensed state, with no atmosphere on top. Although no smoking-gun of vacuum QED effects was found, the phase-dependent behavior of the polarization angle strongly hints that vacuum birefringence is indeed at work in magnetar magnetospheres. [ABSTRACT FROM AUTHOR]

Hybrid pixel detectors have become indispensable at synchrotron and X-ray free-electron laser facilities thanks to their large dynamic range, high frame rate, low noise, and large area. However, at energies below 3 keV, the detector performance is often limited because of the poor quantum efficiency of the sensor and the difficulty in achieving single-photon resolution due to the low signal-to-noise ratio. In this paper, we address the quantum efficiency of silicon sensors by refining the design of the entrance window, mainly by passivating the silicon surface and optimizing the dopant profile of the n+ region. We present the measurement of the quantum efficiency in the soft X-ray energy range for silicon sensors with several process variations in the fabrication of planar sensors with thin entrance windows. The quantum efficiency for 250 eV photons is increased from almost 0.5% for a standard sensor to up to 62% as a consequence of these developments, comparable to the quantum efficiency of backside-illuminated scientific CMOS sensors. Finally, we discuss the influence of the various process parameters on quantum efficiency and present a strategy for further improvement. [ABSTRACT FROM AUTHOR]

The Pohang-Accelerator-Laboratory X-ray free-electron laser (PAL-XFEL) emits intense, ultra-short X-ray pulses, enabling studies on ultra-small and -fast dynamics in various fields. We designed and fabricated silicon p-intrinsic-n photo-diodes (PDs) to detect strong X-ray pulses. Four types of PDs were fabricated with different metal shapes on the P- and N-sides. The fabrication process was split into two parts, based on the thickness of the Al metal and anti- reflective coating (ARC) layers, to evaluate the fabrication process feasibility and the detection performance. A beam test was performed with X-ray pulses at the soft X-ray beamline of the PAL-XFEL using the proposed PDs and a commercial PD. The test was designed to evaluate the effects of the metal and ARC layers and compare the detection efficiency depending on the X-ray entrance side and signal readout side. The waveforms were saved during the test and integrated to obtain the charges. Thereafter, they were analyzed and normalized, and compared. This paper presents the preparation, setup, and procedure of the beam test, and the test results are described. [ABSTRACT FROM AUTHOR]

The Shanghai Soft X-ray Free-Electron Laser (SXFEL) is the first X-ray freeelectron laser facility in China. The SASE beamline, which consists of a pinkbeam branch and a mono-beam branch, is one of the two beamlines in the Phase-I construction. The pink-beam branch opened for users in 2023 after successful first-round beamline commissioning. In this paper, the design of the beamline is presented and the performance of the pink-beam branch is reported. The measured energy-resolving power of the online spectrometer is over 6000 @ 400 eV. The focusing spot size of the pink beam is less than 3 μm in both the horizontal and vertical at the endstation. [ABSTRACT FROM AUTHOR]

With fast advances in enhancing the focusing/imaging resolution of Fresnel zone plate lenses toward sub-10 nm, low diffraction efficiency in connection with their rectangular zone shape still remains a big issue in both soft and hard X-ray microscopy. In hard X-ray optics, encouraging progress has recently been reported in our earlier attempts of high focusing efficiency by 3D kinoform shaped metallic zone plates, formed by greyscale electron beam lithography. This paper addresses our efforts towards high focusing/imaging efficiency by developing a novel dielectric kinoform zone plate lens for soft X-rays. The effects of the zone materials and zone shapes on the focusing/imaging quality were first theoretically investigated by a modified thin-grating-approximation method, revealing superior efficiencies of dielectric kinoform zone plates over rectangular ones in metals. Optical characterizations of replicated dielectric kinoform zone plates by greyscale electron beam lithography demonstrate a focusing efficiency of 15.5% with a resolution of 110 nm in the water window of X-rays. Apart from high efficiency, the novel kinoform zone plate lenses developed in this work exhibit significant advantages over conventional zone plates, i.e. simplified process, low cost and no need for a beamstop. [ABSTRACT FROM AUTHOR]

The paper studies the soft X-ray data of solar flares and found that the distribution functions of flare fluence are successfully modeled by tapered power law or gamma function distributions whose power exponent is slightly smaller than 2, indicating that the total energy of the flare populations is mostly due to a small number of large flares. The largest possible solar flares in 1000 years are predicted to be around X70 (a peak flux of 70 × 10−4 W m−2) in terms of the GOES (Geostationary Operational Environmental Satellites) flare class. The paper also studies superflares (more energetic than solar flares) from solar-type stars and found that their power exponent in the fitting of the gamma function distribution is around 1.05, which is much flatter than solar flares. The distribution function of stellar flare energy extrapolated downward does not connect to the distribution function of solar flare energy. [ABSTRACT FROM AUTHOR]

MAX IV is a fourth‐generation, or diffraction‐limited, synchrotron light source with a number of state‐of‐the‐art beamlines. The performance of a beamline is, to a high degree, set by the energy resolution it can achieve, which in turn is governed to a large extent by the monochromator. During the design phase of a monochromator, the mechanical requirements must be fully understood and met with margin. During commissioning, the performance must be verified and optimized. In this paper, six soft X‐ray monochromators at MAX IV beamlines (Bloch, Veritas, HIPPIE, SPECIES, FinEstBeAMS and SoftiMAX) are examined with a focus on their resolving power, energy range and the time required to change measurement range, as those parameters are dependent on each other. The monochromators have a modern commercial design, planned and developed in close collaboration with the vendors. This paper aims to present the current status of the commissioning at MAX IV with emphasis on elucidating the mechanical limitations on the performance of the monochromators. It contains analysis of the outcome and our approach to achieve fast and high‐resolution monochromators. [ABSTRACT FROM AUTHOR]

Results of Monte Carlo simulations of the electrode-molten salt interface are reported. The system was modeled by soft ions in contact with a soft wall using the Lennard-Jones potential restricted to the repulsion part. The soft wall was formed of C (graphite), Hg, and Pb atoms. Calculations were carried out for the parameter values which would permit making comparison with the real system. The paper presents information on physicochemical properties of the interfacial region, such as the ion singlet distribution functions, the mean electrostatic potential as a function of the distance from the electrode surface, and differential capacitance results as a function of the electrode charges. The differential capacitance curves have a flat and distorted bell shape which vary depending on the kind of the electrode material. The differential capacitance results are discussed and compared with the data obtained from ionic liquid simulations, density functional theory, and mean field calculations. [ABSTRACT FROM AUTHOR]

Solar power changes according to irradiance and temperature in a day. A Maximum Power Point Tracking (MPPT) algorithm is actually necessary to obtain the maximum power from the photovoltaic (PV) arrangement. In this paper, in order to optimize power and improve the efficiency of PV module with regulated output voltage, soft computing MPPT techniques, flying squirrel search optimization and artificial bee colony methods are implemented on cascaded double voltage lift boost converter. The PV module is subjected to both with and without constraints to analyze the performance of the DC/DC converter, and the comparative outcomes are evaluated for resistive and different types of battery loads at various temperature conditions in MATLAB/Simulink platform. The optimized power is achieved by using artificial bee colony technique with less ripple in the output waveforms at constant 25 °C temperature irrespective of the changes in irradiation with the battery load and this can be used for charging of the battery system. [ABSTRACT FROM AUTHOR]

Three generations of the Miniature X-ray Solar Spectrometer (MinXSS) have flown on small satellites with the goal "to explore the energy distribution of soft X-ray (SXR) emissions from the quiescent Sun, active regions, and during solar flares, and to model the impact on Earth's ionosphere and thermosphere." The primary science instrument is the Amptek X123 X-ray spectrometer that has improved with each generation of the MinXSS experiment. This third-generation MinXSS-3 has a higher energy resolution and larger effective area than its predecessors and is also known as the Dual-zone Aperture X-ray Solar Spectrometer (DAXSS). It was launched on the INSPIRESat-1 satellite on 2022 February 14, and INSPIRESat-1 has successfully completed its 6 month prime mission. The INSPIRESat-1 is in a dawn–dusk, Sun-synchronous orbit and therefore has had 24 hr coverage of the Sun during most of its mission so far. The rise of Solar Cycle 25 has been observed by DAXSS. This paper introduces the INSPIRESat-1 DAXSS solar SXR observations, and we focus the science results here on a solar occultation experiment and multiple flares on 2022 April 24. One key flare result is that the reduction of elemental abundances appears greatest during the flare impulsive phase, thus highlighting the important role of chromospheric evaporation during flares to inject warmer plasma into the coronal loops. Furthermore, these results are suggestive that the amount of chromospheric evaporation is related to flare temperature and intensity. [ABSTRACT FROM AUTHOR]

D flip-flop (DFF) is the basic unit of sequential logic in digital circuits. However, because of an internal cross-coupled inverter pair, it can easily appear as a single event upset (SEU) when hit by high-energy particles, resulting in the error in the value stored in the flip-flop. On this basis, a new structure D flip-flop is proposed in this paper. This flip-flop uses an asymmetric scheme in which the master–slave latch adopts different hardening structures. By sacrificing circuit speed in exchange for stronger SEU fortification capability, the SEU threshold of this structure is improved by 10 times compared to traditional D flip-flops. It has also been compared with Dual Interlocked Storage Elements (DICEs), and it saves the area cost of six transistors compared to the DICE structure. Under the same operating conditions, the average power consumption and peak power consumption are, respectively, 9.8% and 18.8% lower than those of the DICE circuit, making it suitable for soft radiation environments where high circuit speed is not a critical requirement. [ABSTRACT FROM AUTHOR]

The magnetopause standoff distance characterizes global magnetospheric compression and deformation in response to changes in the solar wind dynamic pressure and interplanetary magnetic field orientation. We cannot derive this parameter from in situ spacecraft measurements. However, time series of the magnetopause standoff distance can be obtained in the near future using observations by soft X‐ray imagers. In two companion papers, we describe methods of finding the standoff distance from X‐ray images. In Part 1, we present the results of MHD simulations which we use for the calculation of the X‐ray emissivity in the magnetosheath and cusps. Some MHD models predict relatively high density in the magnetosphere, larger than observed in the data. Correcting this, we develop magnetospheric masking methods to separate the magnetosphere from the magnetosheath and cusps. We simulate the X‐ray emissivity in the magnetosheath for different solar wind conditions and dipole tilts. Plain Language Summary: The highly dynamic solar wind continuously bombards the Earth's magnetosphere, which changes shape in response. The magnetopause is the outer boundary of the magnetosphere, which is known to move. We are limited in our knowledge of the overall shape of the magnetopause, as current in situ measurements can only tell us about any change in the magnetopause at one specific location. Spacecraft carrying soft X‐ray imagers, however, will soon revolutionize our understanding by monitoring large areas of the magnetopause as the solar wind varies. In this first of a series of two papers, we simulate X‐ray emissions in the vicinity of the Earth using two magnetohydrodynamic models, and for two case studies with vastly different incoming solar wind conditions. In a subsequent paper, we examine methods how to extract the magnetopause shape from the simulated X‐ray images. Key Points: The SMILE mission will carry soft X‐ray imager onboardMagnetospheric masking methods separate the magnetosphere from the magnetosheath and cuspsWe make magnetospheric masks using threshold conditions and flowlines [ABSTRACT FROM AUTHOR]

A systematic comparison of the models of the circumgalactic medium (CGM) and their observables is crucial to understanding the predictive power of the models and constraining physical processes that affect the thermodynamics of CGM. This paper compares four analytic CGM models: precipitation, isentropic, cooling flow, and baryon pasting models for the hot, volume-filling CGM phase, all assuming hydrostatic or quasi-hydrostatic equilibrium. We show that for fiducial parameters of the CGM of a Milky Way (MW)-like galaxy (⁠|$M_{\rm vir} \sim 10^{12}~{\rm M}_{\odot }$| at |$z\sim 0$|⁠), the thermodynamic profiles – entropy, density, temperature, and pressure – show most significant differences between different models at small (⁠|$r\lesssim 30$|  kpc) and large scales (⁠|$r\gtrsim 100$|  kpc) while converging at intermediate scales. The slope of the entropy profile, which is one of the most important differentiators between models, is |$\approx 0.8$| for the precipitation and cooling flow models, while it is |$\approx 0.6$| and 0 for the baryon pasting and isentropic models, respectively. We make predictions for various observational quantities for an MW mass halo for the different models, including the projected Sunyaev–Zeldovich effect, soft X-ray emission (0.5–2 keV), dispersion measure, and column densities of oxygen ions (O  vi , O  vii , and O  viii) observable in absorption. We provide Python packages to compute the thermodynamic and observable quantities for the different CGM models. [ABSTRACT FROM AUTHOR]

A series of nine new soft salts based on two platinum(II) complexes, namely ([Pt(C^N)(CN)2]−[Pt(C^N)(en)]+) (en = ethane-1,2-diamine), has been developed and synthesized. Their photophysical properties in both solution and the solid state were described. All soft salt complexes exhibit phosphorescence emission with PLQY in the solid state up to 0.36. Most of these materials displayed aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) in water/DMSO solutions as the water ratio increased. Structure–property relationships were analyzed in relation to emission properties. The presence of the free nitrogen atoms in soft salt complexes with a C^N pyrimidine-based ligand allowed for reversible sensitivity to acidic vapors, resulting in the quenching of phosphorescence emission. Additionally, for selected soft salts, we described reversible vapochromism behaviour, making these new materials interesting for multi-detection purposes in anti-counterfeiting applications. [ABSTRACT FROM AUTHOR]

High quantum efficiency (QE) X-ray absorbers are needed for future X-ray astrophysics telescopes. The Advanced Telescope for High ENergy Astrophysics (ATHENA) mission requirements for the X-ray Integral Field Unit (X-IFU) instrument dictate, at their most stringent, that the absorber achieve vertical QE > 90.6% at 7 keV and low total heat capacity, 0.731 pJ/K. The absorber we have designed is 313 µm square composed of 1.05 μm Au and 5.51 μm electroplated Bi films (Barret et al. in Exp Astron 55:373–426, 2023). Overhanging the TES, the absorber is mechanically supported by 6 small legs whose 5 μm diameter is tuned to the target thermal conductance for the device. Further requirements for the absorber for X-IFU include a > 40% reflectance at wavelengths from 1 to 20 μm to reduce shot noise from infrared radiation from higher temperature stages in the cryostat. We meet this requirement by capping our absorbers with an evaporated Ti/Au thin film. Additionally, narrow gaps between absorbers are required for high fill fraction, as well as low levels of fine particulate remaining on the substrate and zero shorts between absorbers that may cause thermal crosstalk. The Light Element Mapper (LEM) is an X-ray probe concept optimized to explore the soft X-ray emission from 0.2 to 2.0 keV. These pixels for LEM require high residual resistance ratio (RRR) thin 0.5 µm Au absorbers to thermalize uniformly and narrow < 2 μm gaps between pixels for high areal fill fraction. This paper reports upon technology developments required to successfully yield arrays of pixels for both mission concepts and presents first testing results of devices with these new absorber recipes. [ABSTRACT FROM AUTHOR]

This article presents a demonstration of the improved performance of an X‐ray free‐electron laser (FEL) using the optical klystron mechanism and helical undulator configuration, in comparison with the common planar undulator configuration without optical klystron. The demonstration was carried out at Athos, the soft X‐ray beamline of SwissFEL. Athos has variable‐polarization undulators, and small magnetic chicanes placed between every two undulators to fully exploit the optical klystron. It was found that, for wavelengths of 1.24 nm and 3.10 nm, the required length to achieve FEL saturation is reduced by about 35% when using both the optical klystron and helical undulators, with each effect accounting for about half of the improvement. Moreover, it is shown that a helical undulator configuration provides a 20% to 50% higher pulse energy than planar undulators. This work represents an important step towards more compact and high‐power FELs, rendering this key technology more efficient, affordable and accessible to the scientific community. [ABSTRACT FROM AUTHOR]

In this paper the design of the free‐electron laser (FEL) in the SXL (Soft X‐ray Laser) project at the MAX IV Laboratory is presented. The target performance parameters originate in a science case put forward by Swedish users and the SXL FEL is foreseen to be driven by the existing MAX IV 3 GeV linac. The SXL project is planned to be realized in different stages and in this paper the focus is on Phase 1, where the basic operation mode for the FEL will be SASE (self‐amplified spontaneous emission), with an emphasis on short pulses. Simulation results for two linac bunches (high and low charge) with different pulse duration are illustrated, as well as the performance for two‐color/two‐pulses mode and power enhancement through tapering. Besides standard SASE and optical klystron configurations, the FEL setup is also tailored to allow for advanced seeding schemes operations. Finally possible upgrades that will be implemented in a second phase of the project are discussed. [ABSTRACT FROM AUTHOR]

We present a thorough soft x-ray photoelectron spectroscopy (XPS) study of a mesoporous titanium dioxide electrode sensitized with the dye 4-(diphenylamino)phenylcyanoacrylic acid, referred to as "L0." Supported by calculations, the suite of XPS, x-ray absorption spectroscopy, and resonant photoelectron spectroscopy allows us to examine bonding interactions between the dye and the surface and the frontier electronic structure at the molecule–oxide interface. While placing these measurements in the context of existing literature, this paper is intended as a useful reference for further studies of more complex triphenylamine based sensitizers. [ABSTRACT FROM AUTHOR]

In this paper, we discuss atomic processes modifying the soft X-ray spectra from optical depth effects like photoelectric absorption and electron scattering suppressing the soft X-ray lines. We also show the enhancement in soft X-ray line intensities in a photoionized environment via continuum pumping. We quantify the suppression/enhancement by introducing a “line modification factor (f mod).” If 0 ≤ f mod ≤ 1, the line is suppressed, which could be the case in both collisionally ionized and photoionized systems. If f mod ≥ 1, the line is enhanced, which occurs in photoionized systems. Hybrid astrophysical sources are also very common, where the environment is partly photoionized and partly collisionally ionized. Such a system is V1223 Sgr, an Intermediate Polar binary. We show the application of our theory by fitting the first-order Chandra Medium Energy Grating (MEG) spectrum of V1223 Sgr with a combination of Cloudy -simulated additive cooling-flow and photoionized models. In particular, we account for the excess flux for O vii, O viii, Ne ix, Ne x, and Mg xi lines in the spectrum found in a recent study, which could not be explained with an absorbed cooling-flow model. [ABSTRACT FROM AUTHOR]

The interaction of two subsequent ultra-short sub-milli-Joule laser pulses with a thin water flow results in an emission of a strong single-cycle THz pulse associated with enhanced soft X-ray emission. In this paper, a chain of processes produced in this interaction is analyzed and compared with other THz generation studies. It is demonstrated that the enhanced THz and X-ray emissions are produced by an energetic electron beam accelerated in the interaction of a main laser pulse with liquid water ejected from the surface by the pre-pulse. This scheme thus provides an efficient laser energy conversion in a THz pulse, avoiding laser self-focusing and filamentation in air. [ABSTRACT FROM AUTHOR]

Soft X‐ray tomography (SXT) is an imaging technique to visualise whole cells without fixation, staining, and sectioning. For SXT imaging, cells are cryopreserved and imaged at cryogenic conditions. Such 'near‐to‐native' state imaging is in high demand and initiated the development of the laboratory table‐top SXT microscope. As many laboratories do not have access to cryogenic equipment, we asked ourselves whether SXT imaging is feasible on dry specimens. This paper shows how the dehydration of cells can be used as an alternative sample preparation to obtain ultrastructure information. We compare different dehydration processes on mouse embryonic fibroblasts in terms of ultrastructural preservation and shrinkage. Based on this analysis, we chose critical point (CPD) dried cells for SXT imaging. In comparison to cryopreserved and air‐dried cells, CPD dehydrated cells show high structural integrity although with about 3–7 times higher X‐ray absorption for cellular organelles. As the difference in X‐ray absorption values between organelles is preserved, 3D anatomy of CPD‐dried cells can be segmented and analysed, demonstrating the applicability of CPD‐dried sample preparation for SXT imaging. LAY DESCRIPTION: Soft X‐ray tomography (SXT) is an imaging technique that allows to see the internal structures of cells without the need for special treatments like fixation or staining. Typically, SXT imaging involves freezing and imaging cells at very low temperatures. However, since many labs lack the necessary equipment, we explored whether SXT imaging could be done on dry samples instead. We compared different dehydration methods and found that critical point drying (CPD) was the most promising for SXT imaging. CPD‐dried cells showed high structural integrity, although they absorbed more X‐rays than hydrated cells, demonstrating that CPD‐dried sample preparation is a viable alternative for SXT imaging. [ABSTRACT FROM AUTHOR]

Antiferromagnet does not show the net magnetization, whereas the finite uncompensated moment can residue at the surface. On the surface of the magnetoelectric antiferromagnet, the finite boundary magnetization can acquire the magnetic response. In this paper, we address the magnetic response of the boundary magnetization in the Pt/magnetoelectric Cr2O3/Pt epitaxial trilayer based on the anomalous Hall effect (AHE) and the soft x-ray magnetic circular dichroism (XMCD). Decreasing the Cr2O3 thickness down to 15 nm, the film acquired the magnetic responsiveness, which manifested as the rectangular hysteresis in the magnetic field dependence of the AHE. The sizable XMCD intensity and the rectangular magnetic field dependence of the XMCD intensity revealed that the magnetic response was attributed to the interfacial Cr moment. The detailed investigation of AHE and XMCD revealed that the domain wall motion dominated the reversal process of the boundary magnetization, which was directly visualized by the scanning XMCD microscope. [ABSTRACT FROM AUTHOR]

FlexPES is a soft X-ray beamline on the 1.5 GeV storage ring at MAX IV Laboratory, Sweden, providing horizontally polarized radiation in the 40-1500 eV photon energy range and specializing in high-resolution photoelectron spectroscopy, fast X-ray absorption spectroscopy and electron-ion/ion-ion coincidence techniques. The beamline is split into two branches currently serving three endstations, with a possibility of adding a fourth station at a free port. The refocusing optics provides two focal points on each branch, and enables either focused or defocused beam on the sample. The endstation EA01 at branch A (Surface and Materials Science) is dedicated to surface- and materials-science experiments on solid samples at ultra-high vacuum. It is well suited not only to all flavours of photoelectron spectroscopy but also to fast (down to sub-minute) high-resolution X-ray absorption measurements with various detectors. Branch B (Low-Density Matter Science) has the possibility to study gas-phase/liquid samples at elevated pressures. The first endstation of this branch, EB01, is a mobile setup for various ion-ion and electron-ion coincidence techniques. It houses a versatile reaction microscope, which can be used for experiments during single-bunch or multi-bunch delivery. The second endstation, EB02, is based on a rotatable chamber with an electron spectrometer for photoelectron spectroscopy studies on primarily volatile targets, and a number of peripheral setups for sample delivery, such as molecular/cluster beams, metal/semiconductor nanoparticle beams and liquid jets. This station can also be used for non-UHV photoemission studies on solid samples. In this paper, the optical layout and the present performance of the beamline and all its endstations are reported. [ABSTRACT FROM AUTHOR]

Recently, stationary plasma with a world-record pulse length of 1056 s was achieved on the Experimental Advanced Superconducting Tokamak (EAST). In this work, the core magnetohydrodynamics (MHD) events as well as mode coupling processes have been investigated in EAST long pulse operation with electron heating dominant and pure radio frequency wave heating low collisionality, by using several diagnostics and the nonlinear numerical code M3D together. A saturated m / n = 1/1 kink mode was observed in the core region, where a stable internal transport barrier was found in the electron temperature channel. The frequencies and 2D structures of these modes were studied by a combination of soft X-ray (SXR) imaging and electron cyclotron emission diagnostics. The frequency of the m / n = 1/1 mode exhibited a feature of chirping down with time, and this chirping rate corresponds to the rate of electron diamagnetic drift frequency change. A twisted pattern ('Taichi structure in shape') was reconstructed by SXR tomography of the m / n = 1/1 mode. The perturbations of electron temperature and density caused by m / n = 1/1 are different in size, the latter one being much smaller. The destabilization of m / n = 1/1 was due to the strong central heating combined with electron cyclotron resonance heating and lower hybrid current drive. In the presence of the m / n = 1/1 mode, a negative current was generated on the magnetic axis, which anomalously broadened the core current profile. A m / n = 3/2 tearing mode triggered by m / n = 1/1 mode was also observed. The m / n = 3/2 mode has a smaller frequency than the m / n = 1/1 mode, and carries an m / n = 3/2 island with detectable size. A novel 3D MHD model that separately evolves the plasma density and temperature is applied to the m / n = 3/2 triggered by m / n = 1/1. It is found that a toroidal current density at the q = 1.5 surface, caused by non-axisymmetric density perturbation during the m / n = 1/1 nonlinear growth phase, was generated and hence the destabilization of the m / n = 3/2 tearing mode. Both the modeled electron temperature and density perturbations agree well with experimental observations. In the last section of this paper, the interaction between the m / n = 1/1 mode and fast electrons as well as the active control of this mode are also presented. [ABSTRACT FROM AUTHOR]

Soft X-ray and vacuum ultraviolet optical system has the imaging performance of plane-symmetric optical system, this paper propose a design method of this kind of optical systems based on the third-order aberration theory of plane-symmetric optical system. First, applying the aberration expressions to calculate all kinds of wave aberrations of every optical element of optical system and building the wave aberration equilibrium equations, and we propose to apply self-adaptive variation probability genetic optimization algorithm to solve them to obtain the initial structure parameters. Second, the evaluation function of imaging performance of optical system is studied and the corresponding expression is given, and then we use the same algorithm discussed in the above for solve the function. Finally, the design method discussed in this paper is applied to design a soft X-ray and vacuum ultraviolet optical system consisting of double elements and its imaging results before and after the optimization are compared and analyzed; and it will verify the effectiveness of the proposed method in this paper. The results show that the design method provides an effective measure for design soft X-ray and vacuum ultraviolet optical system and has a strong practical value. [ABSTRACT FROM AUTHOR]

The Regional Integrated Energy System (RIES) has brought new modes of development, utilization, conversion, storage of energy. The introduction of Soft Open Point (SOP) and the application of Power to Gas (P2G) technology will greatly deepen the coupling of the electricity-gas integrated energy system, improve the flexibility and safety of the operation of the power system, and bring a deal of benefits to the power system. On this background, an optimal dispatch model of RIES combined cold, heat, gas and electricity with SOP is proposed. Firstly, RIES architecture with SOP and P2G is designed and its mathematical model also is built. Secondly, on the basis of considering the optimal scheduling of combined cold, heat, gas and electricity, the optimal scheduling model for RIES was established. After that, the original model is transformed into a mixed-integer second-order cone programming model by using linearization and second-order cone relaxation techniques, and the CPLEX solver is invoked to solve the optimization problem. Finally, the modified IEEE 33-bus system is used to analyze the benefits of SOP, P2G technology and lithium bromide absorption chillers in reducing system network loss and cost, as well as improving the system's ability to absorb wind and solar and operating safety. [ABSTRACT FROM AUTHOR]

Various types of AlfvĂ©n eigenmodes (AEs) have been destabilized by fast ions over a broad frequency range from ∼80 kHz to ∼700 kHz in a series of JET experiments in mixed Dâ€"3He plasmas heated with the three-ion ICRF scenario (2020 Nocente et al Nucl. Fusion 60 124006). In this paper, we identify the radial localization of AEs using an X-mode reflectometer, a multiline interferometer and soft x-ray diagnostics. The analysis is focused on the most representative example of these measurements in JET pulse #95691, where two different types of AlfvĂ©n cascade (AC) eigenmodes were observed. These modes originate from the presence of a local minimum of the safety factor q min. In addition to ACs with frequencies below the frequency of toroidal AlfvĂ©n eigenmodes (TAEs), ACs with frequencies above the TAE frequency were destabilized by energetic ions. Both low- (f ≈ 80â€"180 kHz) and high-frequency (f ≈ 330â€"450 kHz) ACs were localized in the central regions of the plasma. The characteristics of the high-frequency ACs are investigated in detail numerically using HELENA, CSCAS and MISHKA codes. The resonant conditions for the mode excitation are found to be determined by passing ions of rather high energy of several hundred keV and similar to those established in JT-60U with negative-ion-based NBI (2005 Takechi et al Phys. Plasmas 12 082509). The computed radial mode structure is found to be consistent with the experimental measurements. In contrast to low-frequency ACs observed most often, the frequency of the high-frequency ACs decreases with time as the value of q min decreases. This feature is in a qualitative agreement with the analytical model of the high-frequency ACs in Breizman et al (2003 Phys. Plasmas 10 3649). The high-frequency AC could be highly relevant for future ITER and fusion reactor plasmas dominated by ∼MeV energetic ions, including a significant population of passing fast ions. [ABSTRACT FROM AUTHOR]

The Soft X-ray Spectrometer on board Hitomi, with the unprecedented resolving power of R ∼ 1250, allowed the detection of members of the Fe xxv Kα complex emission spectra from the center of the Perseus Cluster. In this paper, we introduce a novel method of measuring the column density using the optically thin (Case A) to optically thick (Case B) transition for one- and two-electron systems. We compare the Fe xxv K α line ratios computed with CLOUDY with that from the Hitomi observations in the outer region of the Perseus core using collision strengths from different atomic data sets, and obtain good agreement. We also show the effect of turbulence on Fe xxv Kα line ratios and interplay between column density and metallicity. Additionally, we discuss the atomic number dependence of transition probabilities for allowed and unallowed transitions, which causes highly charged He-like systems, such as Fe xxv , to behave fundamentally differently from He i. [ABSTRACT FROM AUTHOR]

The term "laser microexplosion" has been introduced to stress the violent character of the optical breakdown by laser radiation under conditions of tight focusing. Generally, the starting phase of the breakdown has been neglected by the assumption of absorption triggered by the presence of damage precursors. The application of the plasticity–elasticity theory in the analysis of the dynamics of this phenomenon has not been extensively examined to date. This paper formulates a phenomenological model attempting to explain the creation of nanovoids in a soft matter under irradiation by a flux of extreme ultraviolet (XUV)/soft x-ray photons. The combined action of plastic deformation and dissociation waves on soft matter is found to be responsible for the material modifications. It is suggested that localized (volume ≃ λ 3) abundance of energy, coming most likely from photon bunching, constitutes the real onset of the photo-ablative decomposition. It is shown that the coincidental presence of some small number of energy carriers (2–3 XUV photons in the considered case) in such a small volume triggers processes denoted from now on as a laser nanoexplosion. The effect is considered to be the first step in the optical breakdown followed by an intense material removal resembling, to some extent, a phase explosion. [ABSTRACT FROM AUTHOR]

The origins of quasi-periodic eruptions (QPEs) are poorly understood, although most theoretical explanations invoke an accretion disc around a supermassive black hole. The gas and stellar environments in the galactic nuclei of these sources are also poorly constrained. In this paper, we present an analysis of archival Hubble Space Telescope (HST) images to study the narrow-line [O  iii ] emission in the QPE source GSN 069. We find strong evidence for a compact nuclear [O  iii ] emission region of size ≲ 35 pc, overlaid on top of extended [O  iii ] emission up to 1 kpc away from the nucleus. The age of the accretion system is estimated to be between 10 and 100 yr. The [O  iii ] luminosity of the compact region was measured to be |$(2.1 \pm 0.3) \times 10^{40}\, \rm erg\, s^{-1}$|⁠. Based on cloudy simulations, we constrain that the [O  iii ] emitting gas has a hydrogen number density in the range |$2 \times 10^{3} \lt n_{\rm H} \lesssim 10^{8}\, \rm cm^{-3}$| and volume filling factor f V < 4 × 10−3. We suggest that the dense gas in the nuclear region of GSN 069 originates from molecular clouds (with total mass |$\gtrsim 3 \times 10^{3}\, {\rm M}_{\odot }$|⁠), which are freshly ionized by the soft X-ray photons from the accretion disc. We predict possible evolution of the compact narrow-line region on emission-line diagnostic diagrams, and hence future HST or integral-field unit observations can be used to further pin down the age of this puzzling system. [ABSTRACT FROM AUTHOR]

This paper presents a correlation between time evolution of ions and electrons with soft and hard x-rays emitted from argon plasma. The plasma setup comprises of two copper electrodes connected with a dc power supply. Faraday cups were used to monitor time evolution of ions, to extract their energy, temperature, and flux. Double Langmuir probe was employed to determine electron temperature, energy, and density. To explore time-resolved emission of soft x-rays, PIN photodiodes filtered with 24 μm aluminum, 90 μm Mylar, 80 μm copper, and 10 μm silver have been used. To evaluate temporal evolution of hard x-rays, a scintillator–photomultiplier system was utilized. The plasma was generated using argon gas at atmospheric pressure 760 Torr and constant flow rate 5 L/min at 7, 9, and 11 kV. The flux, energy, and temperature of Ar ions increase with the increase in the operating potential. Soft x-ray signals last much longer (3000 ns) than those of electrons' and ions' signals (300 ns). The plasma operated at 11 kV permits highest emission of ions, electrons, and x-rays. The ions, electrons, and hard and soft x-ray irradiation on silicon wafer exhibited the presence of damaged trails. Ion irradiation showed the presence of latent damaged trails. Electron irradiation caused more damage to the Si surface compared to ion irradiation due to higher flux and density. Soft x-rays had a lesser effect as compared to Si exposed to hard x-rays due to higher energy of the hard x-rays. In the case of hard x-rays irradiated Si, erupted volcano-like structure is formed. [ABSTRACT FROM AUTHOR]

Synchrotron light sources can provide the required spatial coherence, stability and control to support the development of advanced lithography at the extreme ultraviolet and soft X-ray wavelengths that are relevant to current and future fabricating technologies. Here an evaluation of the optical performance of the soft X-ray (SXR) beamline of the Australian Synchrotron (AS) and its suitability for developing interference lithography using radiation in the 91.8 eV (13.5 nm) to 300 eV (4.13 nm) range are presented. A comprehensive physical optics model of the APPLE-II undulator source and SXR beamline was constructed to simulate the properties of the illumination at the proposed location of a photomask, as a function of photon energy, collimation and monochromator parameters. The model is validated using a combination of experimental measurements of the photon intensity distribution of the undulator harmonics. It is shown that the undulator harmonics intensity ratio can be accurately measured using an imaging detector and controlled using beamline optics. Finally, the photomask geometric constraints and achievable performance for the limiting case of fully spatially coherent illumination are evaluated. [ABSTRACT FROM AUTHOR]

Calculations and measurements of polarization-dependent soft X-ray scattering intensity are presented during a magnetic hysteresis cycle. It is confirmed that the dependence of the intensity on the magnetic moment can be linear, quadratic or a combination of both, depending on the polarization of the incident X-ray beam and the direction of the magnetic moment. With a linearly polarized beam, the scattered intensity will have a purely quadratic dependence on the magnetic moment when the magnetic moment is parallel to the scattering plane. However, with the magnetic moment perpendicular to the scattering plane, there is also a linear component. This means that, when measuring the hysteresis with linear polarization during a hysteresis cycle, the intensity will be an even function of the applied field when the change in the magnetic moment (and field) is confined within the scattering plane but becomes more complicated when the magnetic moment is out of the scattering plane. Furthermore, with circular polarization, the dependence of the scattered intensity on the moment is a combination of linear and quadratic. With the moment parallel to the scattering plane, the linear component changes with the helicity of the incident beam. Surprisingly, in stark contrast to absorption studies, even when the magnetic moment is perpendicular to the scattering plane there is still a dependence on the moment with a linear component. This linear component is completely independent of the helicity of the beam, meaning that the hysteresis loops will not be inverted with helicity. [ABSTRACT FROM AUTHOR]

We analyse the X-ray spectrum of the black hole (BH) X-ray binary MAXI J1820 + 070 using observations from XMM-Newton and NuSTAR during 'hard' states of its 2018–2019 outburst. We take a fully Bayesian approach, and this is one of the first papers to present a fully Bayesian workflow for the analysis of an X-ray binary X-ray spectrum. This allows us to leverage the relatively well-understood distance and binary system properties (like inclination and BH mass), as well as information from the XMM-Newton RGS data to assess the foreground X-ray absorption. We employ a spectral model for a 'vanilla' disc-corona system: the disc is flat and in the plane perpendicular to the axis of the jet and the BH spin, the disc extends inwards to the innermost stable circular orbit around the BH, and the (non-thermal) hard X-ray photons are up-scattered soft X-ray photons originating from the disc thermal emission. Together, these provide tight constraints on the spectral model and, in combination with the strong prior information about the system, mean we can then constrain other parameters that are poorly understood such as the disc colour correction factor. By marginalizing over all the parameters, we calculate a posterior density for the BH spin parameter, a. Our modelling suggests a preference for low or negative spin values, although this could plausibly be reproduced by higher spins and a modest degree of disc truncation. This approach demonstrates the efficacy and some of the complexities of Bayesian methods for X-ray spectral analysis. [ABSTRACT FROM AUTHOR]

The pulse duration in short-pulse schemes for Self-Amplified Spontaneous Emission Free Electron Lasers (SASE FELs) is limited by the FEL coherence time. A recently proposed concept allows to overcome the coherence time barrier and to obtain much shorter pulses. When the lasing part of an electron bunch is much shorter than the coherence time, one can suppress the radiation in the long main undulator while preserving microbunching within that short lasing slice. Then, a short radiation pulse is produced in a relatively short radiator. A possible suppression method, an excessive reverse undulator taper, is discussed and illustrated numerically in this paper. We also performed the first experimental tests of this method at the soft X-ray FEL user facility FLASH. The measured pulse duration approaches 1 fs (FWHM) at the wavelength of 5 nm. [ABSTRACT FROM AUTHOR]

Reliability of Static Random Access Memories (SRAMs) is immensely affected by radiation induced soft errors. Multiple Cell Upsets (MCUs) are caused by these soft errors and this lead to data corruption in several SRAM cells. Error Correcting Codes are normally exploited to alleviate the effect of MCUs. Single Error Correction–Double Error Detection (SEC–DED) codes are not the appropriate preference against MCUs rather these codes are suitable for protecting SRAM cells against Single Cell Upset. Single Error Correction–Double Error Detection–Double Adjacent Error Correction (SEC–DED–DAEC) codes are more suitable due to increasing trends of single and double-adjacent errors in SRAM cells. In this paper, a new SEC–DED–DAEC code has been proposed which is proficient of correcting single and double-adjacent errors in SRAMs. Our newly proposed code has been termed as Single and Double-adjacent Error Correcting Code (SDECC). Proposed codecs have been designed by employing new parity check matrices for different word lengths which are frequently applied in memory. The mis-correction probability of proposed SDECC codes are up to 88.24% and 80.67% lesser for 2-random and 3-random bit errors respectively with respect to related existing designs. Proposed codecs have been replicated and synthesized in ASIC environment. It is observed that area and power consumption of the proposed codecs are reduced up to 8.93% and 21.47% compared to the recently published results respectively. [ABSTRACT FROM AUTHOR]

Memristive devices are under intense development as non‐volatile memory elements for extending the computing capabilities of traditional silicon technology by enabling novel computing primitives. In this respect, interface‐based memristive devices are promising candidates to emulate synaptic functionalities in neuromorphic circuits aiming to replicate the information processing of nervous systems. A device composed of Nb/NbOx/Al2O3/HfO2/Au that shows promising features like analog switching, no electro‐forming, and high current‐voltage non‐linearity is reported. Synchrotron‐based X‐ray photoelectron spectroscopy and depth‐dependent hard X‐ray photoelectron spectroscopy are used to probe in situ different resistance states and thus the origin of memristive switching. Spectroscopic evidence for memristive switching based on the charge state of electron traps within HfO2 is found. Electron energy loss spectroscopy and transmission electron microscopy support the analysis. A device model is proposed that considers a two‐terminal metal–insulator–semiconductor structure in which traps within the insulator (HfO2/Al2O3) modulate the space charge region within the semiconductor (NbOx) and, thereby, the overall resistance. The experimental findings are in line with impedance spectroscopy data reported in the companion paper (Marquardt et al). Both works complement one another to derive a detailed device model, which helps to engineer device performance and integrate devices into silicon technology. [ABSTRACT FROM AUTHOR]

Breast cancer is the most common type of cancer worldwide. Diagnosing breast cancer relies on clinical examination, imaging and biopsy. A core-needle biopsy enables a morphological and biochemical characterization of the cancer and is considered the gold standard for breast cancer diagnosis. A histopathological examination uses high-resolution microscopes with outstanding contrast in the 2D plane, but the spatial resolution in the third, Z-direction, is reduced. In the present paper, we propose two high-resolution table-top systems for phase-contrast X-ray tomography of soft-tissue samples. The first system implements a classical Talbot–Lau interferometer and allows to perform ex-vivo imaging of human breast samples with a voxel size of 5.57 μm. The second system with a comparable voxel size relies on a Sigray MAAST X-ray source with structured anode. For the first time, we demonstrate the applicability of the latter to perform X-ray imaging of human breast specimens with ductal carcinoma in-situ. We assessed image quality of both setups and compared it to histology. We showed that both setups made it possible to target internal features of breast specimens with better resolution and contrast than previously achieved, demonstrating that grating-based phase-contrast X-ray CT could be a complementary tool for clinical histopathology. [ABSTRACT FROM AUTHOR]