Search

Water resource carrying capacity (WRCC) is an important index for measuring the relations between water resource systems and socio-economic-environmental development. In view of the difficulty in describing the complex and nonlinear relationships between the WRCC and indicators using traditional methods, this study introduces deep learning theory and proposes a novel deep neural network named WRCC-Net for WRCC assessment. Unlike typical network structures, we constructed a hierarchical structure that can indicate the index system in WRCC evaluation. Furthermore, we utilized a residual learning technique to increase the network depth for fitting the complex relationship between the WRCC state and indicators. The proposed deep learning method was applied to solve the real-world WRCC problem by taking the Yunnan province (Southwest China) as the case area. The WRCC was assessed from the following five dimensions: the water resources, social, economic, ecological environment, and coordination subsystems. Performance evaluation shows the advantages of the proposed WRCC-Net over the typical deep feed-forward network and shallow methods. Therefore, the proposed method provides a new way of evaluating the WRCC state and has potential for WRCC research. Overall, the WRCC evaluation using the WRCC-Net shows that the state of the WRCC in Yunnan constantly decreased from 2008 to 2018. These central-eastern areas in the Yunnan province, such as Kunming, Qujing, and Yuxi, are under an unfavorable capacity state. Measures, such as improving water resources management and increasing water utilization efficiency, should be considered in water resource planning in Yunnan province for the sustainable development of water resources., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

As the cognition of spine develops, deep learning (DL) emerges as a powerful tool with tremendous potential for advancing research in this field. To provide a comprehensive overview of DL-spine research, our study utilized bibliometric and visual methods to retrieve relevant articles from the Web of Science database. VOSviewer and CiteSpace were primarily used for literature measurement and knowledge graph analysis. A total of 273 studies focusing on deep learning in the spine, with a combined total of 2302 citations, were retrieved. Additionally, the overall number of articles published on this topic demonstrated a continuous upward trend. China was the country with the highest number of publications, whereas the USA had the most citations. The two most prominent journals were "European Spine Journal" and "Medical Image Analysis," and the most involved research area was Radiology Nuclear Medicine Medical Imaging. VOSviewer identified three visually distinct clusters: "segmentation," "area," and "neural network." Meanwhile, CiteSpace highlighted "magnetic resonance image" and "lumbar" as the keywords with the longest usage, and "agreement" and "automated detection" as the most commonly used keywords. Although the application of DL in spine is still in its infancy, its future is promising. Intercontinental cooperation, extensive application, and more interpretable algorithms will invigorate DL in the field of spine., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Due to budget and sensor technology constraints, a single sensor cannot simultaneously provide observational images with both a high spatial and temporal resolution. To solve the above problem, the spatiotemporal fusion (STF) method was proposed and proved to be an indispensable tool for monitoring land surface dynamics. There are relatively few systematic reviews of the STF method. Bibliometrics is a valuable method for analyzing the scientific literature, but it has not yet been applied to the comprehensive analysis of the STF method. Therefore, in this paper, we use bibliometrics and scientific mapping to analyze the 2967 citation data from the Web of Science from 1991 to 2023 in a metrological manner, covering the themes of STF, data fusion, multi-temporal analysis, and spatial analysis. The results of the literature analysis reveal that the number of articles displays a slow to rapid increase during the study period, but decreases significantly in 2023. Research institutions in China (1059 papers) and the United States (432 papers) are the top two contributors in the field. The keywords "Sentinel", "deep learning" (DL), and "LSTM" (Long Short-Term Memory) appeared most frequently in the past three years. In the future, remote sensing spatiotemporal fusion research can address more of the limitations of heterogeneous landscapes and climatic conditions to improve fused images' accuracy. [ABSTRACT FROM AUTHOR]

Background: With potential of deep learning in musculoskeletal image interpretation being explored, this paper focuses on the common site of rotator cuff tears, the supraspinatus. It aims to propose and validate a deep learning model to automatically extract the supraspinatus, verifying its superiority through comparison with several classical image segmentation models. Method: Imaging data were retrospectively collected from 60 patients who underwent inpatient treatment for rotator cuff tears at a hospital between March 2021 and May 2023. A dataset of the supraspinatus from MRI was constructed after collecting, filtering, and manually annotating at the pixel level. This paper proposes a novel A-DAsppUnet network that can automatically extract the supraspinatus after training and optimization. The analysis of model performance is based on three evaluation metrics: precision, intersection over union, and Dice coefficient. Results: The experimental results demonstrate that the precision, intersection over union, and Dice coefficients of the proposed model are 99.20%, 83.38%, and 90.94%, respectively. Furthermore, the proposed model exhibited significant advantages over the compared models. Conclusion: The designed model in this paper accurately extracts the supraspinatus from MRI, and the extraction results are complete and continuous with clear boundaries. The feasibility of using deep learning methods for musculoskeletal extraction and assisting in clinical decision-making was verified. This research holds practical significance and application value in the field of utilizing artificial intelligence for assisting medical decision-making. [ABSTRACT FROM AUTHOR]

Handwriting is a biometric behavioral characteristic with evident individual distinctiveness. With the rise of the deep learning trend and demands for forensic identification, handwriting identification has become one of the focal points of research in the field of pattern recognition. Research in handwriting identification for major global languages has matured. However, in China, there is limited attention in the field of writer identification for minority languages such as Mongolian, making it challenging to resolve criminal cases involving handwriting issues. This paper initiates an initial exploration of Mongolian handwriting identification by constructing a structurally simple convolutional neural network. This convolutional neural network, consisting of 12 convolution operations and designed for Mongolian handwriting identification, is referred to as MWInet-12. In this paper, the model evaluation experiments were conducted using a dataset comprising 156,372 samples contributed by 125 writers from the MOLHW dataset. The dataset was divided into training, validation, and test sets in an 8:1:1 ratio. The final results of the experiments reveal impressive accuracy on the test set, achieving a top-1 accuracy of 89.60% and a top-5 accuracy of 97.53%. Furthermore, through comparative experiments involving Resnet50, Fragnet, GRRNN, VGG16, and VGG19 models, this paper establishes that the proposed model yields the most favorable results for Mongolian handwriting identification. The exploratory research on Mongolian handwriting identification in this paper contributes to increasing awareness of information processing for minority languages. It aids in advancing research on classifying writers of Mongolian historical texts and provides technical support for judicial authentication involving handwriting issues. [ABSTRACT FROM AUTHOR]

Simple Summary: In the sorting process of Chinese softshell turtles, it is necessary to classify them based on their weight and accurately identify their plastron and carapace. This process requires heavy manual labor and complex mechanical processing methods. To improve processing efficiency and reduce costs, this article introduces machine vision technology, and a new image processing method is proposed. This method can estimate the weight of Chinese softshell turtles and accurately locate the positions of their plastron and carapace. The automation level of aquaculture can be greatly enhanced, and hardware costs can be reduced through software optimization through this approach. With the rapid development of the turtle breeding industry in China, the demand for automated turtle sorting is increasing. The automatic sorting of Chinese softshell turtles mainly consists of three parts: visual recognition, weight prediction, and individual sorting. This paper focuses on two aspects, i.e., visual recognition and weight prediction, and a novel method for the object detection and weight prediction of Chinese softshell turtles is proposed. In the individual sorting process, computer vision technology is used to estimate the weight of Chinese softshell turtles and classify them by weight. For the visual recognition of the body parts of Chinese softshell turtles, a color space model is proposed in this paper to separate the turtles from the background effectively. By applying multiple linear regression analysis for modeling, the relationship between the weight and morphological parameters of Chinese softshell turtles is obtained, which can be used to estimate the weight of turtles well. An improved deep learning object detection network is used to extract the features of the plastron and carapace of the Chinese softshell turtles, achieving excellent detection results. The mAP of the improved network reached 96.23%, which can meet the requirements for the accurate identification of the body parts of Chinese softshell turtles. [ABSTRACT FROM AUTHOR]

As the fastest-growing crowdfunding model, equity crowdfunding (ECF) brings high returns and uncertainty. In this context, it is crucial to understand these crowdfunding projects' actual performance. Since ECF is currently in the early stage of integration, there are still a lot of risk issues, such as the uncertainty of equity structure, capital supervision, or project management. Therefore, this paper develops a new profitability indicator, "return on registered capital," to test its impact on the ECF project's actual return. This paper studies which factors affect the financial performance of ECF projects through the traditional statistical model and a deep neural network (DNN) model. There is evidence that return on registered capital affects the actual return of the project. At the same time, the company's operating time and the number of employees had an unexpected effect on project performance. In addition, the recognition accuracy of the DNN model in this study exceeds 97%, which affirms the applicability of the DNN model in the analysis of ECF success factors. This paper also uses tenfold cross-validation to prove that deep learning has certain advantages in this topic's accuracy and generalization error. This study explores whether company representatives' gender and knowledge level affect project performance. The results will be described in detail in the paper. [ABSTRACT FROM AUTHOR]

In this paper, 1,538 papers retrieved with the keywords "sports artificial intelligence (AI)" on the Web of Science database since 2007 were taken as the data source, and the Cite Space V software was used to visualize and analyze them. A visual knowledge graph was used to streamline the countries, institutions and authors conducting sports AI research, discipline distribution, research hotspots and development trends in the past 15 years. Subsequently, its development direction and research progress were discussed. Sports AI was widely distributed, with the US, China and the UK leading the way. The most prolific authors and teams in research on sports AI were concentrated in American universities. Their main research direction is to develop and improve smart wearable devices based on machine learning and deep learning technologies for different groups of people. Research on sports AI involved multiple disciplines, which mainly applied and referred to research methodologies and theories on engineering, computer science and sports science. It could be seen from the frequency and centrality of keywords that in the current field of sports AI, machine learning is the main direction, artificial neural networks is the main algorithm, and practical and empirical research based on data mining is the focus. The research hotspots were divided into three major clusters: physical health promotion, sports injury prevention and control, and athletic performance enhancement. How to introduce intelligent technology into sports for a perfect integration still has an arduous and long way to go. Future development requires joint efforts and participation of scientific researchers, professionals and common people. [ABSTRACT FROM AUTHOR]

Blueberries have high nutritional and economic value and are easy to cultivate, so they are common fruit crops in China. There is a high demand for blueberry in domestic and foreign markets, and various technologies have been used to extend the supply cycle of blueberry to about 7 months. However, blueberry grows in clusters, and a cluster of fruits generally contains fruits of different degrees of maturity, which leads to low efficiency in manually picking mature fruits, and at the same time wastes a lot of manpower and material resources. Therefore, in order to improve picking efficiency, it is necessary to adopt an automated harvesting mode. However, an accurate maturity detection model can provide a prerequisite for automated harvesting technology. Therefore, this paper proposes a blueberry ripeness detection model based on enhanced detail feature and content-aware reassembly. First of all, this paper designs an EDFM (Enhanced Detail Feature Module) that improves the ability of detail feature extraction so that the model focuses on important features such as blueberry color and texture, which improves the model's ability to extract blueberry features. Second, by adding the RFB (Receptive Field Block) module to the model, the lack of the model in terms of receptive field can be improved, and the calculation amount of the model can be reduced at the same time. Then, by using the Space-to-depth operation to redesign the MP (MaxPool) module, a new MP-S (MaxPool–Space to depth) module is obtained, which can effectively learn more feature information. Finally, an efficient upsampling method, the CARAFE (Content-Aware Reassembly of Features) module, is used, which can aggregate contextual information within a larger receptive field to improve the detection performance of the model. In order to verify the effectiveness of the method proposed in this paper, experiments were carried out on the self-made dataset "Blueberry—Five Datasets" which consists of data on five different maturity levels of blueberry with a total of 10,000 images. Experimental results show that the mAP (mean average precision) of the proposed network reaches 80.7%, which is 3.2% higher than that of the original network, and has better performance than other existing target detection network models. The proposed model can meet the needs of automatic blueberry picking. [ABSTRACT FROM AUTHOR]

Tree detection and canopy area measurement are important and difficult tasks in forest inventory, which are important for understanding forest stand structure. This study utilized remotely piloted aircraft (RPA) aerial photography technology to collect remote sensing images of forests in Xiong County, China, creating a dataset comprising 1200 images of six tree species. Based on this dataset, the paper proposes an optimized model, Att-Mask R-CNN, for canopy detection and segmentation. Att-Mask R-CNN outperforms the original models (Mask R-CNN and MS R-CNN) by achieving 65.29% mean average precision for detection, 80.44% mean intersection over union for segmentation, and 90.67% overall recognition rate for the six tree species. In addition, a pixel statistics method based on segmentation masks is introduced for estimating the vertical projected area of individual tree crowns, and comparisons between the measured and predicted vertical projected area of the crowns of six tree species (100 trees of each class) show an overall goodness-of-fit R2 of 85% and a relative root-mean-square error rRMSE of 12.81%. By using remote sensing images from RPAs and optimizing existing deep learning models, the detection and segmentation of individual tree canopies can be achieved, resulting in a more accurate understanding of forest structure, which provides scientific support for forest management and resource monitoring. [ABSTRACT FROM AUTHOR]

This paper aims to develop a new model of Project-Based Instructional Taxonomy (PBIT) that provides a tool of course design that facilitates Computational Thinking (CT) development as creative action in solving real-life problems. Theoretically, PBIT is built on an integrative framework bringing together with studies on CT education, creativity, Bloom's Taxonomy, and Project-Based Instruction (PBI). This guides the course design to make alignment between diverse elements including education objectives, categories of CT, levels of learning ability, process of project facilitation, and methods of grading. A case will be discussed that focuses on a course Deep Learning and Technologies in AI bachelor program at Northeastern University (NEU) in China. It also shows how PBIT is applied in teaching practice that benefits students' CT development. As the conclusion indicates, this paper has contributions to future research on creativity, PBI, CT, and AI education. [ABSTRACT FROM AUTHOR]

The rapid expansion of metro networks, e.g., in many cities of China, continuously introduces the operation of new stations every year. Due to the lack of historical data and complicate variations of short-term passenger flow in the early stage of operation, it is difficult to accurately predict inbound and outbound passenger flows of new metro stations in the short term, which would be the database for train scheduling for new stations before operation, dynamic capacity optimization for new stations under operation, short-term prediction of cycle sharing demands near new stations, and so on. Traditional methods usually failed to exactly reflect the complicate rules or were unusable without the new station's historical data. In order to solve the above problems, this paper proposes a short-term inbound and outbound passenger flow prediction model for new metro stations at the early stage of operation by combining the K-means clustering algorithm, an improved spatiotemporal long short-term memory model (Sp-LSTM), and a real-time feedback error model (mean absolute error, MAE), where passenger flows' spatial-temporal characteristics and land-use relevance are considered. The application in Guangzhou Metro, China, where Line 21 is regarded as a new line, shows that the proposed K-Sp-LSTM model has the best prediction accuracy compared with traditional methods. [ABSTRACT FROM AUTHOR]

The mining of open pit mines is widespread in China, and there are many cases of landslide accidents. Therefore, the problem of slope stability is highlighted. The stability of the slope is a factor that directly affects the mining efficiency and the safety of the entire mining process. According to the statistics, there is a 15 percent chance of finding landslide risk in China's large-scale mines. And due to the expansion of the mining scale of the enterprise, the problem of slope stability has become increasingly obvious, which has become a major subject in the study of open-pit mine engineering. In order to better predict the slope stability coefficient, this study takes a mine in China as a case to deeply discuss the accuracy of different algorithms in the stability calculation, and then uses a deep learning algorithm to study the stability under rainfall conditions. The change of the coefficient and the change of the stability coefficient before and after the slope treatment are experimentally studied with the displacement of the monitoring point. The result shows that the safety coefficient calculated by the algorithm in this paper is about 7% lower than that of the traditional algorithm. In the slope stability analysis before treatment, the safety factor calculated by the algorithm in this paper is 1.086, and the algorithm in this paper is closer to reality. In the stability analysis of the slope after treatment, the safety factor calculated by the algorithm in this paper is 1.227, and the stability factor meets the requirements of the specification. It also shows that the deep learning algorithm effectively improves the efficiency of the slope stability factor prediction and improves security during project development. [ABSTRACT FROM AUTHOR]

In China, table tennis has always been one of the most popular sports, with small field restrictions and it is simple and fun to play. But what is unknown is that with China's major table tennis events thriving, the psychological pressure of table tennis players' training is also increasing. However, the existing training methods obviously do not pay enough attention to psychological training, and there is no complete system for psychological training. Although the current dynamic heart rate measurement method can play a certain role in the detection, there is still the disadvantage of low detection accuracy. The heart rate is an important sign of life, and the monitoring of the heart rate of table tennis players should be strengthened, reflecting the functional state of the athletes' heart, and facilitating the more intuitive adjustment of the psychological training method of athletes. The heart rate measurement method based on face recognition contains a plate content that is rich. Through deep learning face recognition, the heart rate measurement method has high calculation efficiency, can effectively eliminate the influence of other external environmental factors, can use video recording, and can use face recognition and physiological parameters' quantification to monitor athletes' heart rate changes in real time; the visible artificial intelligence auxiliary diagnosis potential is huge. To this end, this paper aims to provide effective suggestions for the psychological training of table tennis players with deep learning as the technical support. In response to this, the aim of this paper was to design a deep learning-based face recognition heart rate measurement method that judges the psychological fluctuations of athletes through changes in heart rate. We conducted a questionnaire survey with the table tennis players of the Hunan team as the object of investigation, so as to understand the source of the psychological pressure of athletes and make reasonable suggestions. The experimental results of this paper show that the heart rate error of the video heart rate measurement algorithm is within 3% in the calm state and within 4% in the post-exercise state. This can effectively measure psychological fluctuations, and through investigation and research, it can provide an effective method for the psychological training of table tennis players. [ABSTRACT FROM AUTHOR]

This study reviewed the status quo of research on machine learning (ML), including deep learning, in the rail industry. This study conducted a scientometric analysis and critical review of 640 papers selected from 12,675 web-crawled papers. The extensive and complex networks of topics, researchers, and countries were analyzed using the Louvain method, a co-occurrence keyword analysis, a degree centrality analysis, and other network analysis methods. The results indicate that the majority of studies of ML in the rail industry focused on maintenance activities and traffic management, and mainly targeted rolling stock, rails, and passengers. Overhead contact systems, including catenaries, are a high-demand objective for ML-based maintenance. Although analyses of tunnels and stations remain rare, passenger flow prediction, station air quality estimation, shield tunneling performance improvement, and ground settlement are areas of high importance. Geographically, China, the US, and the United Kingdom lead ML studies in the rail industry, and the level of collaboration is higher among European countries than among countries on other continents. Future challenges include ensuring the security and stability of ML, along with considering novel mindsets, the black-box effect, improvements in ML techniques, and resource overload when introducing ML technologies. [ABSTRACT FROM AUTHOR]

Background: Lung cancer is one of the cancers with the highest mortality rate in China. With the rapid development of high-throughput sequencing technology and the research and application of deep learning methods in recent years, deep neural networks based on gene expression have become a hot research direction in lung cancer diagnosis in recent years, which provide an effective way of early diagnosis for lung cancer. Thus, building a deep neural network model is of great significance for the early diagnosis of lung cancer. However, the main challenges in mining gene expression datasets are the curse of dimensionality and imbalanced data. The existing methods proposed by some researchers can't address the problems of high-dimensionality and imbalanced data, because of the overwhelming number of variables measured (genes) versus the small number of samples, which result in poor performance in early diagnosis for lung cancer. Method: Given the disadvantages of gene expression data sets with small datasets, high-dimensionality and imbalanced data, this paper proposes a gene selection method based on KL divergence, which selects some genes with higher KL divergence as model features. Then build a deep neural network model using Focal Loss as loss function, at the same time, we use k-fold cross validation method to verify and select the best model, we set the value of k is five in this paper. Result: The deep learning model method based on KL divergence gene selection proposed in this paper has an AUC of 0.99 on the validation set. The generalization performance of model is high. Conclusion: The deep neural network model based on KL divergence gene selection proposed in this paper is proved to be an accurate and effective method for lung cancer prediction. [ABSTRACT FROM AUTHOR]

Semantic image segmentation in computer networks is designed to determine the category to which each pixel in an image belongs. It is a basic computer vision task and has a very wide range of applications in practice. In recent years, semantic image segmentation algorithms in computer networks based on deep learning have attracted widespread attention due to their fast speed and high accuracy. However, due to the large number of downsampling layers in a deep learning model, the segmentation results are usually poor at the edge of an object, and there is currently no universal quantitative evaluation index to measure the performance of segmentation at the edge of an object. Solving these two problems is of great significance to semantic image segmentation algorithms in China. Based on traditional evaluation indicators, this paper proposes a region-based evaluation index to quantitatively measure the performance of segmentation at the edge of an object and proposes an improved loss function to improve model performance. The existing semantic image segmentation methods are summarized. This paper proposes regional-based evaluation indicators. Taking advantage of the particularity of semantic image segmentation tasks, this paper presents an efficient and accurate method for extracting the edges of objects. By defining the distance from pixels to the edges of objects, this paper proposes a fast algorithm for calculating the edge area. Based on this, three methods are proposed as well as an area-based evaluation indicator. The experimental results show that the accuracy of the loss function proposed in this paper, compared with that of the current mainstream cross-entropy loss function, is improved by 1% on the DeepLab model. For area-based evaluation indicators, a 4% accuracy improvement can be achieved, and on other segmentation models, there is also a significant improvement. [ABSTRACT FROM AUTHOR]

In recent years, China's economy has been developing rapidly, and people's life and quality of life have been improving; more importantly, people's habits and living habits have also developed from the previous "unhygienic" and "not very careful" to the current "Healthier, more hygienic, greener and more sophisticated" direction. In the process of this development, due to the rapid development of the economy and the industrialization of cities, the incidence of heart disease is also increasing year by year. According to relevant studies, China's urbanization process has been unprecedented, the number of urbanized people in China has exploded in recent years, and the ratio of urban to rural population has increased from about 20 percent to about 75 percent today. The effects of the population and the urbanization of urban architecture are affecting people's physical and mental health, both consciously and unconsciously, causing both positive and negative physical and mental effects on the psychological and physical levels. In this paper, the concept of deep learning is fully utilized to train the CNN neural network model and apply it to the ECG abnormality recognition and prediction examination. In order to fully validate the application and significance of deep learning in ECG abnormality identification and prediction, the whole project was completed through subjective and objective experiments. The experimental results show that, from the subjective aspect, the ECG examination has been accepted by most people for different age groups, and the analysis results of the ECG examination with the deep learning model in this paper are more satisfactory; from the objective aspect, the CNN-ECG abnormality recognition prediction network model trained in this paper has high. The accuracy of the model for ECG abnormality recognition prediction can reach 86% when the learning rate is set to 0.0001 and the batch size is set to 120, and the model can reduce the burden of medical personnel to a certain extent. [ABSTRACT FROM AUTHOR]

With the rapid development of artificial intelligence in recent years, intelligent evaluation of college students' growth by means of the monitoring data from training processes is becoming a promising technique in the field intelligent education. Current studies, however, tend to utilize course grades, which are objective, to predict students' grade-point averages (GPAs), but usually neglect subjective factors like psychological resilience. To solve this problem, this paper takes mechanical engineering as the research object, and proposes a new machine-learning-driven GPA prediction approach to evaluate the academic performance of engineering students by incorporating psychological evaluation data into basic course scores. Specifically, this paper adopts SCL-90 psychological assessment data collected in the freshman year, including key mental health indicators such as somatization, depression, hostility, and interpersonal sensitivity indicators, as well as professional basic course scores, including mechanical principles, mechanical design, advanced mathematics, and engineering drawing. Four representative machine learning algorithms, Support Vector Machine (SVM), CNN-CBAM, Extreme Gradient Boosting (XGBoost) and Classification and Regression Tree (CART) that include deep and shallow models, respectively, are then employed to build a classification model for GPA prediction. This paper designs a validation experiment by tracking 229 students from the 2020 class from the School of Mechanical and Electrical Engineering of Henan University of Science and Technology, China. The students' academic performance in senior grades is divided into five classes to use as the prediction labels. It is verified that psychological data and course data can be effectively integrated into GPA prediction for college students, with an accuracy rate of 83.64%. Meanwhile, this paper also reveals that anxiety indicators in the psychological assessment data have the greatest impact on college students' academic performance, followed by interpersonal sensitivity. The experimental results also show that, for predicting junior year GPAs, psychological factors play more important role than they do in predicting sophomore GPAs. Suggestions are therefore given: the current practice in existing undergraduate teaching, i.e., only conducting psychological assessments in the initial freshman year, should be updated by introducing follow-up psychological assessments in each academic year. [ABSTRACT FROM AUTHOR]

Existing macroeconomic forecasting methods primarily focus on the characteristics of economic data, but they overlook the energy-related features concealed behind these economic characteristics, which may lead to inaccurate GDP predictions. Therefore, this paper meticulously analyzes the relationship between energy big data and economic data indicators, explores the coupling feature mining of energy big data and economic data, and constructs features coupling economic and energy data. Targeting the nonlinear variation coupling features in China's quarterly GDP data and using the long short-term memory (LSTM) neural network model based on deep learning, we employ wavelet analysis technology (WA) to decompose selected macroeconomic variables and construct a prediction model combining LSTM and WA, which is further compared with multiple benchmark models. The research findings show that, in terms of quarterly GDP data prediction, the combined deep learning model and wavelet analysis significantly outperform other methods. When processing structurally complex, nonlinear, and multi-variable data, the LSTM and WA combined prediction model demonstrate better generalization capabilities, with its prediction accuracy generally surpassing other benchmark models. [ABSTRACT FROM AUTHOR]

This paper consists of a bibliometric study that covers the topic of 3D object detection from 2022 until the present day. It employs various analysis approaches that shed light on the leading authors, affiliations, and countries within this research domain alongside the main themes of interest related to it. The findings revealed that China is the leading country in this domain given the fact that it is responsible for most of the scientific literature as well as being a host for the most productive universities and authors in terms of the number of publications. China is also responsible for initiating a significant number of collaborations with various nations around the world. The most basic theme related to this field is deep learning, along with autonomous driving, point cloud, robotics, and LiDAR. The work also includes an in-depth review that underlines some of the latest frameworks that took on various challenges regarding this topic, the improvement of object detection from point clouds, and training end-to-end fusion methods using both camera and LiDAR sensors, to name a few. [ABSTRACT FROM AUTHOR]

Dragon fruit is one of the most popular fruits in China and Southeast Asia. It, however, is mainly picked manually, imposing high labor intensity on farmers. The hard branches and complex postures of dragon fruit make it difficult to achieve automated picking. For picking dragon fruits with diverse postures, this paper proposes a new dragon fruit detection method, not only to identify and locate the dragon fruit, but also to detect the endpoints that are at the head and root of the dragon fruit, which can provide more visual information for the dragon fruit picking robot. First, YOLOv7 is used to locate and classify the dragon fruit. Then, we propose a PSP-Ellipse method to further detect the endpoints of the dragon fruit, including dragon fruit segmentation via PSPNet, endpoints positioning via an ellipse fitting algorithm and endpoints classification via ResNet. To test the proposed method, some experiments are conducted. In dragon fruit detection, the precision, recall and average precision of YOLOv7 are 0.844, 0.924 and 0.932, respectively. YOLOv7 also performs better compared with some other models. In dragon fruit segmentation, the segmentation performance of PSPNet on dragon fruit is better than some other commonly used semantic segmentation models, with the segmentation precision, recall and mean intersection over union being 0.959, 0.943 and 0.906, respectively. In endpoints detection, the distance error and angle error of endpoints positioning based on ellipse fitting are 39.8 pixels and 4.3°, and the classification accuracy of endpoints based on ResNet is 0.92. The proposed PSP-Ellipse method makes a great improvement compared with two kinds of keypoint regression method based on ResNet and UNet. Orchard picking experiments verified that the method proposed in this paper is effective. The detection method proposed in this paper not only promotes the progress of the automatic picking of dragon fruit, but it also provides a reference for other fruit detection. [ABSTRACT FROM AUTHOR]

Wind turbine energy generators operate in a variety of environments and often under harsh operational conditions, which can result in the mechanical failure of wind turbines. In order to ensure the efficient operation of wind turbines, the detection of any abnormality in the mechanics is particularly important. In this paper, a method for detecting abnormalities in the bearings of wind turbine energy generators, based on the cascade deep learning model, is proposed. First, data on the mechanics of wind turbine generators were collected, and the correlation between the data was studied in order to select the parameters related to the bearing temperature. Then, the logical relationship between the observation parameters and the target parameters was established based on a one-dimensional convolutional neural network (CNN) and a long short-term memory (LSTM) network, and the difference between the predicted temperature and the actual temperature was assessed using the root mean square error evaluation model. Finally, a numerical example was used to verify the operational data from a wind farm unit in northwest China. The results show that the CNN-LSTM model proposed in this paper can detect abnormalities earlier in the state of the main bearing than the LSTM model, and the CNN-LSTM model can detect abnormalities in the main bearing that the LSTM network cannot find. [ABSTRACT FROM AUTHOR]

Aedes albopictus (Diptera: Culicidae) plays a crucial role as a vector for mosquito-borne diseases like dengue and zika. Given the limited availability of effective vaccines, the prevention of Aedes-borne diseases mainly relies on extensive efforts in vector surveillance and control. In multiple mosquito control methods, the identification and elimination of potential breeding sites (PBS) for Aedes are recognized as effective methods for population control. Previous studies utilizing unmanned aerial vehicles (UAVs) and deep learning to identify PBS have primarily focused on large, regularly-shaped containers. However, there has been a small amount of empirical research into their practical application in the field. We have thus constructed a PBS dataset specifically tailored for Ae. albopictus, including items such as buckets, bowls, bins, aquatic plants, jars, lids, pots, boxes, and sinks that were common in the Yangtze River Basin in China. Then, a YOLO v7 model for identifying these PBS was developed. Finally, we recognized and labeled the area with the highest PBS density, as well as the subarea with the most urgent need for source reduction in the empirical region, by calculating the kernel density value. Based on the above research, we proposed a UAV-AI-based methodological framework to locate the spatial distribution of PBS, and conducted empirical research on Jinhulu New Village, a typical model community. The results revealed that the YOLO v7 model achieved an excellent result on the F1 score and mAP(both above 0.99), with 97% of PBS correctly located. The predicted distribution of different PBS categories in each subarea was completely consistent with true distribution; the five houses with the most PBS were correctly located. The results of the kernel density map indicate the subarea 4 with the highest density of PBS, where PBS needs to be removed or destroyed with immediate effect. These results demonstrate the reliability of the prediction results and the feasibility of the UAV-AI-based methodological framework. It can minimize repetitive labor, enhance efficiency, and provide guidance for the removal and destruction of PBS. The research can shed light on the investigation of mosquito PBS investigation both methodologically and practically., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Photovoltaic (PV) power generation is booming in rural areas, not only to meet the energy needs of local farmers but also to provide additional power to urban areas. Existing methods for estimating the spatial distribution of PV power generation potential either have low accuracy and rely on manual experience or are too costly to be applied in rural areas. In this paper, we discuss three aspects, namely, geographic potential, physical potential, and technical potential, and propose a large-scale and efficient PV potential estimation system applicable to rural rooftops in China. Combined with high-definition map images, we proposed an improved SegNeXt deep learning network to extract roof images. Using the national standard Design Code for Photovoltaic Power Plants (GB50797-2012) and the Bass model, computational results were derived. The average pixel accuracy of the improved SegNeXt was about 96%, which well solved the original problems of insufficient finely extracted edges, poor adhesion, and poor generalization ability and can cope with different types of buildings. Leizhou City has a geographic potential of 1500 kWh/m2, a physical potential of 25,186,181.7 m2, and a technological potential of 442.4 MW. For this paper, we innovatively used the Bass Demand Diffusion Model to estimate the installed capacity over the next 35 years and combined the Commodity Diffusion Model with the installed capacity, which achieved a good result and conformed to the dual-carbon "3060" plan for the future of China. [ABSTRACT FROM AUTHOR]

Using deep learning in remote sensing interpretation could reduce a lot of human and material costs. Semantic segmentation is the main method for this task. It can automatically outline the objects and it has recently achieved great success in remote sensing images. However, in the appliance of remote sensing interpretation, the accuracy of contour largely determines the evaluation of remote sensing interpretation. Though the current loss functions reflect the segmentation performance, they could not guide the model to optimize itself toward a more precise contour. This paper proposed an exactly defined contour loss (CL) for remote sensing interpretation with Residual Attention U-Net (RA U-Net) as the main framework. The RA U-Net uses the residual attention module as the skip connection layer. It enhances the judgment of U-Net. In CL, image processing methods are used to extract the contours of the foreground. And elements-sum and elements-subtract operations are used to transfer the contour information to a matrix of the same size as label images. Then, these matrices would be the weights for CE. By assigning different weights for different elements in different regions, this function will guide the model to reach a balance between accurate segmentation results and precise contours. The experiment on open datasets shows a good performance. The proposed model was also trained on the Construction Disturbance Dataset collected from Jiang Xi Province, China. The dataset was labeled manually. The evaluation enhanced a lot on the Construction Disturbance Dataset and the IoU on two datasets increased 1 % to 2 % when using CL as the loss function. This paper also compared the proposed method with other state-of-the-art methods and the results showed extensive effectiveness. [ABSTRACT FROM AUTHOR]

The coronavirus first appeared in China in 2019, and the World Health Organization (WHO) named it COVID-19. Then WHO announced this illness as a worldwide pandemic in March 2020. The number of cases, infections, and fatalities varied considerably worldwide. Because the main characteristic of COVID-19 is its rapid spread, doctors and specialists generally use PCR tests to detect the COVID-19 virus. As an alternative to PCR, X-ray images can help diagnose illness using artificial intelligence (AI). In medicine, AI is commonly employed. Convolutional neural networks (CNN) and deep learning models make it simple to extract information from images. Several options exist when creating a deep CNN. The possibilities include network depth, layer count, layer type, and parameters. In this paper, a novel Xception-based neural network is discovered using the genetic algorithm (GA). GA finds better alternative networks and parameters during iterations. The best network discovered with GA is tested on a COVID-19 X-ray image dataset. The results are compared with other networks and the results of papers in the literature. The novel network of this paper gives more successful results. The accuracy results are 0.996, 0.989, and 0.924 for two-class, three-class, and four-class datasets, respectively. [ABSTRACT FROM AUTHOR]

After many years of exploitation in the petroleum field, most of the oil fields are in advanced stages of development, with a strong non-homogeneity of the reservoir, more residual oil, and low recovery efficiency. Therefore, research on various methods has been carried out by scholars to improve the rate of recovery and to understand the distribution pattern of residual oil in reservoirs. Among the whole clastic reservoirs, fluvial reservoirs occupy a large proportion, so fluvial reservoirs will be the priority for future reservoir research in China. The key to the fine characterization of fluvial-phase reservoirs is to able to reproduce the continuous curvature of the channel, and one important parameter is the width of the channel. The width of the channel sand body is one of the key factors in designing well programs, and accurately identifying the channel boundary is the key to identifying a single channel. Traditional research methods cannot accurately characterize the continuous bending and oscillating morphology of underwater diversion channels, and it is not easy to quantitatively characterize the spatial structure. Therefore, in this paper, a deep learning method is applied to quantitatively identify the width of a single channel within an underwater diversion channel at the delta front edge. Based on the sedimentary background of the block and modern depositional studies, we established candidate models for underwater diversion channels with channel widths of 100, 130, 160, 190, 220, and 250 m based on target simulation and human–computer interactions. The results show that when the width of the underwater diversion channel is 160 m, it has the highest matching rate with the conditional data and corresponds to the actual situation. Therefore, it can be determined that it is the common width of underwater diversion channel in the study area. And it is shown that the method can accurately identify the width of underwater diversion channels, and the results provide a basis for reservoir fine characterization studies. [ABSTRACT FROM AUTHOR]

Objectives: The purpose of this research is to summarize the structure of radiomics-based knowledge and to explore potential trends and priorities by using bibliometric analysis. Methods: Select radiomics-related publications from 2012 to October 2022 from the Science Core Collection Web site. Use VOSviewer (version 1.6.18), CiteSpace (version 6.1.3), Tableau (version 2022), Microsoft Excel and Rstudio's free online platforms (http://bibliometric.com) for co-writing, co-citing, and co-occurrence analysis of countries, institutions, authors, references, and keywords in the field. The visual analysis is also carried out on it. Results: The study included 6428 articles. Since 2012, there has been an increase in research papers based on radiomics. Judging by publications, China has made the largest contribution in this area. We identify the most productive institutions and authors as Fudan University and Tianjie. The top three magazines with the most publications are《FRONTIERS IN ONCOLOGY》, 《EUROPEAN RADIOLOGY》, and 《CANCERS》. According to the results of reference and keyword analysis, "deep learning, nomogram, ultrasound, f-18-fdg, machine learning, covid-19, radiogenomics" has been determined as the main research direction in the future. Conclusion: Radiomics is in a phase of vigorous development with broad prospects. Cross-border cooperation between countries and institutions should be strengthened in the future. It can be predicted that the development of deep learning-based models and multimodal fusion models will be the focus of future research. Advances in knowledge: This study explores the current state of research and hot spots in the field of radiomics from multiple perspectives, comprehensively, and objectively reflecting the evolving trends in imaging-related research and providing a reference for future research. [ABSTRACT FROM AUTHOR]

With the advent of the era of big data and information technology, deep learning (DL) has become a hot trend in the research field of artificial intelligence (AI). The use of deep learning methods for parameter inversion, disease identification, detection, surrounding rock classification, disaster prediction, and other tunnel engineering problems has also become a new trend in recent years, both domestically and internationally. This paper briefly introduces the development process of deep learning. By reviewing a number of published papers on the application of deep learning in tunnel engineering over the past 20 years, this paper discusses the intelligent application of deep learning algorithms in tunnel engineering, including collapse risk assessment, water inrush prediction, crack identification, structural stability evaluation, and seepage erosion in mountain tunnels, urban subway tunnels, and subsea tunnels. Finally, it explores the future challenges and development prospects of deep learning in tunnel engineering. [ABSTRACT FROM AUTHOR]

Buiding data-driven models using machine learning methods has gradually become a common approach for studying reservoir parameters. Among these methods, deep learning methods are highly effective. From the perspective of multi-task learning, this paper uses six types of logging data—acoustic logging (AC), gamma ray (GR), compensated neutron porosity (CNL), density (DEN), deep and shallow lateral resistivity (LLD) and shallow lateral resistivity (LLS) —that are inputs and three reservoir parameters that are outputs to build a porosity saturation permeability network (PSP-Net) that can predict porosity, saturation, and permeability values simultaneously. These logging data are obtained from 108 training wells in a medium-low permeability oilfield block in the western district of China. PSP-Net method adopts a serial structure to realize transfer learning of reservoir-parameter characteristics. Compared with other existing methods at the stage of academic exploration to simulating industrial applications, the proposed method overcomes the disadvantages inherent in single-task learning reservoir-parameter prediction models, including easily overfitting and heavy model-training workload. Additionally, the proposed method demonstrates good anti-overfitting and generalization capabilities, integrating professional knowledge and experience. In 37 test wells, compared with the existing method, the proposed method exhibited an average error reduction of 10.44%, 27.79%, and 28.83% from porosity, saturation, permeability calculation. The prediction and actual permeabilities are within one order of magnitude. The training on PSP-Net are simpler and more convenient than other single-task learning methods discussed in this paper. Furthermore, the findings of this paper can help in the re-examination of old oilfield wells and the completion of logging data. [ABSTRACT FROM AUTHOR]

Previous studies have investigated the determinants of urban tourism development from the various attributes of neighborhood quality. However, traditional methods to assess neighborhood quality are often subjective, costly, and only on a small scale. To fill this research gap, this study applies the recent development in big data of street view images, deep learning algorithms, and image processing technology to assess quantitatively four attributes of neighborhood quality, namely street facilities, architectural landscape, green or ecological environment, and scene visibility. The paper collects more than 7.8 million Baidu SVPs of 232 prefecture-level cities in China and applies deep learning techniques to recognize these images. This paper then tries to examine the influence of neighborhood quality on regional tourism development. Empirical results show that both levels of street facilities and greenery environment promote tourism. However, the construction intensity of the landscape has an inhibitory influence on the development of tourism. The threshold test shows that the intensity of the influence varies with the city's overall economic level. These conclusions are of great significance for the development of China's urban construction and tourism economy, and also provide a useful reference for policymakers. The methodological procedure is reduplicative and can be applied to other challenging cases. [ABSTRACT FROM AUTHOR]

Deep learning, a pivotal branch of artificial intelligence, has increasingly influenced the financial domain with its advanced data processing capabilities. This paper introduces Factor-GAN, an innovative framework that utilizes Generative Adversarial Networks (GAN) technology for factor investing. Leveraging a comprehensive factor database comprising 70 firm characteristics, Factor-GAN integrates deep learning techniques with the multi-factor pricing model, thereby elevating the precision and stability of investment strategies. To explain the economic mechanisms underlying deep learning, we conduct a subsample analysis of the Chinese stock market. The findings reveal that the deep learning-based pricing model significantly enhances return prediction accuracy and factor investment performance in comparison to linear models. Particularly noteworthy is the superior performance of the long-short portfolio under Factor-GAN, demonstrating an annualized return of 23.52% with a Sharpe ratio of 1.29. During the transition from state-owned enterprises (SOEs) to non-SOEs, our study discerns shifts in factor importance, with liquidity and volatility gaining significance while fundamental indicators diminish. Additionally, A-share listed companies display a heightened emphasis on momentum and growth indicators relative to their dual-listed counterparts. This research holds profound implications for the expansion of explainable artificial intelligence research and the exploration of financial technology applications., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wang, Chen. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Dust pollution from storage and handling of materials in dry bulk ports seriously affects air quality and public health in coastal cities. Accurate prediction of dust pollution helps identify risks early and take preventive measures. However, there remain challenges in solving non-stationary time series and selecting relevant features. Besides, existing studies rarely consider impacts of port operations on dust pollution. Therefore, a hybrid approach based on data decomposition and deep learning is proposed to predict dust pollution from dry bulk ports. Port operational data is specially integrated into input features. A secondary decomposition and recombination (SDR) strategy is presented to reduce data non-stationarity. A dual-stage attention-based sequence-to-sequence (DA-Seq2Seq) model is employed to adaptively select the most relevant features at each time step, as well as capture long-term temporal dependencies. This approach is compared with baseline models on a dataset from a dry bulk port in northern China. The results reveal the advantages of SDR strategy and integrating operational data and show that this approach has higher accuracy than baseline models. The proposed approach can mitigate adverse effects of dust pollution from dry bulk ports on urban residents and help port authorities control dust pollution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Wheat is a major grain crop in China, accounting for one-fifth of the national grain production. Drought stress severely affects the normal growth and development of wheat, leading to total crop failure, reduced yields, and quality. To address the lag and limitations inherent in traditional drought monitoring methods, this paper proposes a multimodal deep learning-based drought stress monitoring S-DNet model for winter wheat during its critical growth periods. Drought stress images of winter wheat during the Rise-Jointing, Heading-Flowering and Flowering-Maturity stages were acquired to establish a dataset corresponding to soil moisture monitoring data. The DenseNet-121 model was selected as the base network to extract drought features. Combining the drought phenotypic characteristics of wheat in the field with meteorological factors and IoT technology, the study integrated the meteorological drought index SPEI, based on WSN sensors, and deep image learning data to build a multimodal deep learning-based S-DNet model for monitoring drought stress in winter wheat. The results show that, compared to the single-modal DenseNet-121 model, the multimodal S-DNet model has higher robustness and generalization capability, with an average drought recognition accuracy reaching 96.4%. This effectively achieves non-destructive, accurate, and rapid monitoring of drought stress in winter wheat., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Yao et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Seagrasses are marine flowering plants that inhabit shallow coastal and estuarine waters and serve vital ecological functions in marine ecosystems. However, seagrass ecosystems face the looming threat of degradation, necessitating effective monitoring. Remote-sensing technology offers significant advantages in terms of spatial coverage and temporal accessibility. Although some remote sensing approaches, such as water column correction, spectral index-based, and machine learning-based methods, have been proposed for seagrass detection, their performances are not always satisfactory. Deep learning models, known for their powerful learning and vast data processing capabilities, have been widely employed in automatic target detection. In this study, a typical seagrass habitat (Swan Lake) in northern China was used to propose a deep learning-based model for seagrass detection from Landsat satellite data. The performances of UNet and SegNet at different patch scales for seagrass detection were compared. The results showed that the SegNet model at a patch scale of 16 × 16 pixels worked well, with validation accuracy and loss of 96.3 % and 0.15, respectively, during training. Evaluations based on the test dataset also indicated good performance of this model, with an overall accuracy >95 %. Subsequently, the deep learning model was applied for seagrass detection in Swan Lake between 1984 and 2022. We observed a noticeable seasonal variation in germination, growth, maturation, and shrinkage from spring to winter. The seagrass area decreased over the past four decades, punctuated by intermittent fluctuations likely attributed to anthropogenic activities, such as aquaculture and construction development. Additionally, changes in landscape ecology indicators have demonstrated that seagrass experiences severe patchiness. However, these problems have weakened recently. Overall, by combining remote sensing big data with deep learning technology, our study provides a valuable approach for the highly precise monitoring of seagrass. These findings on seagrass area variation in Swan Lake offer significant information for seagrass restoration and management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Previous research methodologies for quantifying Suspended Sediment Concentration (SSC) have encompassed in-situ observations, numerical simulations, and analyses of remote sensing datasets, each with inherent constraints. In this study, we have harnessed Convolutional Neural Networks (CNNs) to create a deep learning model, which has been applied to the remote sensing data procured from the Geostationary Ocean Color Imager (GOCI) spanning April 2011 to March 2021. Our research indicates that on a small time scale, wind and hydrodynamic forces both have a significant impact on the prediction results of CNNs model. Considering both wind and hydrodynamic forces can effectively improve the model's prediction efficiency for SSC. Moreover, we have employed CNNs to interpolate absent values within the remote sensing datasets, yielding enhancements superior to those attained via linear or multivariate regression techniques. Finally, the correlation coefficient between CNN-derived SSC estimates for Jiaozhou Bay (JZB) and its corresponding remote sensing data is 0.72. Correlation coefficient and root mean square error differ in different regions. In the shallow water of JZB, due to water level changes, there is limited data, and the correlation coefficient in this area is about 0.5-0.6. In the central region of JZB with sufficient data, the correlation coefficient is generally higher than 0.75. Therefore, we believe that this CNNs model can be used to predict the hourly variation of SSC. When juxtaposed with alternative methodologies, the CNN approach is found to economize computational resources and enhance processing efficiency., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study delves into Human–Computer Intelligent Interaction (HCII), a burgeoning interdisciplinary field that builds upon traditional Human–Computer Interaction (HCI) by integrating advanced technologies like Natural Language Processing (NLP) and Machine Learning (ML). In this paper, we scrutinize 5,781 HCII papers published between 2000 and 2023, narrowing our focus to 803 most relevant articles to construct co-citation and interdisciplinary networks based on the CiteSpace Software. Our findings reveal that the publications of the United States and China are relatively high with 558 and 616 publications respectively. Furthermore, we found that machine learning and deep learning have emerged as the prevalent methodologies in HCII, which currently emphasizes multimodal emotion recognition, facial expression recognition, and NLP. We predict that HCII will be integrated into advanced applications such as neural-based interactive games and multi-sensory environments. In sum, our analysis underscores HCII's role in advancing artificial intelligence, facilitating more intuitive and efficient human–computer interactions, and its prospective societal impact. We hope that our review and analysis may guide the efforts of researchers aiming to contribute to HCII and develop more powerful and intelligent methods, tools, and applications. [ABSTRACT FROM AUTHOR]

Water conservation has become a global problem as the population increases. In many densely populated cities in China, leaks from century-old pipe works have been widespread. However, entirely eradicating the issues involves replacing all water networks, which is costly and time-consuming. This paper proposed an AI-enabled water-saving control system with three control modes: time division control, flow regulation, and critical point control according to actual flow. Firstly, based on the current leaking situation of water supply networks in China and the capability level of China's water management, a water-saving technology integrating PID control and a series of deep learning algorithms was proposed. Secondly, a multi-jet control valve was designed to control pressure and reduce water distribution network cavitation. This technology has been successfully applied in industrial settings in China and has achieved gratifying water-saving results. [ABSTRACT FROM AUTHOR]

Although atmospheric CO2 concentrations collected by satellites play a crucial role in understanding global greenhouse gases, the sparse geographic distribution greatly affects their widespread application. In this paper, a hybrid CNN and spatiotemporal Kriging (CNN-STK) model is proposed to generate a monthly spatiotemporal continuous XCO2 dataset over China at 0.25° grid-scale from 2015 to 2020, utilizing OCO-2 XCO2 and geographic covariates. The validations against observation samples, CAMS XCO2 and TCCON measurements indicate the CNN-STK model is effective, robust, and reliable with high accuracy (validation set metrics: R2 = 0.936, RMSE = 1.3 ppm, MAE = 0.946 ppm; compared with TCCON: R2 = 0.954, RMSE = 0.898 ppm and MAE = 0.741 ppm). The accuracy of CNN-STK XCO2 exhibits spatial inhomogeneity, with higher accuracy in northern China during spring, autumn, and winter and lower accuracy in northeast China during summer. XCO2 in low-value-clustering areas is notably influenced by biological activities. Moreover, relatively high uncertainties are observed in the Qinghai-Tibet Plateau and Sichuan Basin. This study innovatively integrates deep learning with the geostatistical method, providing a stable and cost-effective approach for other countries and regions to obtain regional scales of atmospheric CO2 concentrations, thereby supporting policy formulation and actions to address climate change. [ABSTRACT FROM AUTHOR]

In recent years, the State Grid of China has placed significant emphasis on the monitoring of noise in substations, driven by growing environmental concerns. This paper presents a substation noise monitoring system designed based on an end-network-cloud architecture, aiming to acquire and analyze substation noise, and report anomalous noise levels that exceed national standards for substation operation and maintenance. To collect real-time noise data at substations, a self-developed noise acquisition device is developed, enabling precise analysis of acoustic characteristics. Moreover, to subtract the interfering environmental background noise (bird/insect chirping, human voice, etc.) and determine if noise exceedances are originating from substation equipment, an intelligent noise separation algorithm is proposed by leveraging the convolutional time-domain audio separation network (Conv-TasNet), dual-path recurrent neural network (DPRNN), and dual-path transformer network (DPTNet), respectively, and evaluated under various scenarios. Experimental results show that (1) deep-learning-based separation algorithms outperform the traditional spectral subtraction method, where the signal-to-distortion ratio improvement (SDRi) and the scale-invariant signal-to-noise ratio improvement (SI-SNRi) of Conv-TasNet, DPRNN, DPTNet and the traditional spectral subtraction are 12.6 and 11.8, 13.6 and 12.4, 14.2 and 12.9, and 4.6 and 4.1, respectively; (2) DPTNet and DPRNN exhibit superior performance in environment noise separation and substation equipment noise separation, respectively; and (3) 91% of post-separation data maintains sound pressure level deviations within 1 dB, showcasing the effectiveness of the proposed algorithm in separating interfering noises while preserving the accuracy of substation noise sound pressure levels. [ABSTRACT FROM AUTHOR]

The implementation of the strategy of rural revitalization is a major ministerial work made by the Nineteenth National Congress of the Communist Party of China and is the general grasp of contemporary agriculture, peasants, and rural work. In recent years, with the rapid development of remote sensing technology and deep learning technology, the demand for the technology for the classification of crops on satellite remote sensing images based on deep learning technology has increased in agricultural insurance and land survey. Therefore, this paper trains one, which is 85.9%–92.8%, the accuracy of corn classification is 77%–93%, and the accuracy of forest classification is 77%–87.6%. Subsequently, the overall accuracy of classifying all directories through the multi-temporal validation data set between May 2017 and October 2017 reached 92.6%. Such a multi-time combination method can be used for monthly, timely, and efficient iteration of agricultural insurance and crop yield estimation, which will be more accurate each time. These methods can also be further applied to the growth and change monitoring of large agricultural planting areas, adding bricks and tiles to China's agricultural remote sensing. If the countryside is to be revitalized, agriculture must develop rapidly at the same time, industries must flourish, ecology must be livable, rural customs must be civilized, and life must be prosperous. Modern agriculture is a comprehensive circulation system with high yield, high quality, low consumption, ecology, environmental protection, and high efficiency. The development of modern agriculture is inseparable from the industrialization of agriculture, the globalization of agriculture, the digitization of agriculture, the integration of agriculture, the adjustment of agricultural structure, and agricultural innovation. Only the continuous development of modern agriculture can make rural revitalization enter a new journey. [ABSTRACT FROM AUTHOR]

China has proposed two major measures to address the "three rural issues": the first is to abolish the agricultural tax, which has been in place for over 2000 years; the second is to propose the construction of a new socialist countryside, which would mark the end of the old era and the beginning of the new. As a result, this paper employs in-depth learning technology to enhance rural tourism development and the creation of a new socialist countryside. This paper investigates deep-learning-based rural tourism and the creation of a new socialist countryside. Because MSE and MAE reflect the prediction error score, the lower the value, the better the recommendation accuracy. The MSE value of the machine learning algorithm is 2.456, the MSE value of the data mining algorithm is 2.324, and the MSE value of the convolution neural network algorithm is 2.102, when the number reaches 80. It can be concluded that the convolution neural network algorithm proposed in this paper has the lowest MSE and MAE values of the three methods, implying that the convolution neural network algorithm is the best of the three. The use of the convolution neural network algorithm to implement the scientific concept of development and the construction of a new socialist countryside is an important part of creating a harmonious society that fully meets the central government's objectives and requirements for the construction of a new socialist countryside. [ABSTRACT FROM AUTHOR]

Toll-gates are crucial points of management and key congestion bottleneck for the freeway. In order to avoid traffic deterioration and alleviate traffic congestion in advance, it is necessary to predict and evaluate the congestion in toll-gates scattering in large-scale region of freeway network. In this paper, traffic volume and operational delay time are selected from various traffic indicators to evaluate congestion considering the particular characteristics of the traffic flow within the toll-gate area. The congestion prediction method is designed including two modules: a deep learning (DL) prediction and a fuzzy evaluation. We propose a modified deep learning method based on graph convolutional network (GCN) structure in the fusion of dilated causal mechanism and optimize the method for spatial feature extraction by constructing a new adjacency matrix. This new AI network could process spatiotemporal information of traffic volume and operational delay time, that extracted from large-scaled toll-gates spontaneously, and predict key indicators in 15/30/60 min future time. The evaluation module is proposed based on these predicted results. Then, fuzzy C-means algorithm (FCM) is further modified by determining coupling weight for these two key indicators to detect congestion state. Original traffic data are obtained from the current 186 toll-gates served on the freeway network in Shaanxi Province, China. Experimental tests are carried out based on historical data of four months after preprogressing. The comparative tests show the proposed CPT-DF (congestion prediction on toll-gates using deep learning and fuzzy evaluation) outperforms the current-used other models by 6-15%. The successful prediction could extend to the real-time prediction and early warning of traffic congestion in the toll system to improve the intelligent level of traffic emergency management and guidance on the key road of disasters to some extent. [ABSTRACT FROM AUTHOR]

Weather forecasting requires a comprehensive analysis of various types of meteorology data, and with the wide application of deep learning in various fields, deep learning has proved to have powerful feature extraction capabilities. In this paper, from the viewpoint of an image semantic segmentation problem, a deep learning framework based on semantic segmentation is proposed to nowcast Cloud-to-Ground and Intra-Cloud lightning simultaneously within an hour. First, a dataset with spatiotemporal features is constructed using radar echo reflectivity data and lightning observation data. More specifically, each sample in the dataset consists of the past half hour of observations. Then, a Light3DUnet is presented based on 3D U-Net. The three-dimensional structured network can extract spatiotemporal features, and the encoder–decoder structure and the skip connection can handle small targets and recover more details. Due to the sparsity of lightning observations, a weighted cross-loss function was used to evaluate network performance. Finally, Light3DUnet was trained using the dataset to predict Cloud-to-Ground and Intra-Cloud lightning in the next hour. We evaluated the prediction performance of the network using a real-world dataset from middle China. The results show that Light3DUnet has a good ability to nowcast IC and CG lightning. Meanwhile, due to the spatial position coupling of IC and CG on a two-dimensional plane, predictions from summing the probabilistic prediction matrices will be augmented to obtain accurate prediction results for total flashes. [ABSTRACT FROM AUTHOR]

Deformation can effectively reflect the structural state of concrete dams and, thus, establishing na accurate concrete dam deformation prediction model is important for dam health monitoring and early warning strategies. To address the problem that the spatial coordinates introduced in the traditional multi-point deformation prediction model of dams not being able to accurately and efficiently reflect the spatial correlation of multiple-measuring points, a 2D-1D-CNN model is proposed which expresses the spatial correlation between each measuring point through spatial feature vectors, replacing the spatial coordinates in the traditional multi-point model. First, the spatial feature vector is extracted from the historical spatio-temporal panel series of deformation values of measuring points via a Two-Dimensional Convolutional Neural Network (2D-CNN); second, the vector is combined with the environmental impact factor of dam deformation to form the final input factor of fused spatial features; and, thirdly, this vector is combined with the environmental impact factors of dam deformation to form the final input factor of fused spatial features, and the non-linear linkage between the factors and the measured displacement values is constructed by the efficient feature processing capability of a One-Dimensional Convolutional Neural Network (1D-CNN) to obtain the prediction results. Finally, the actual monitoring data of a concrete dam in China are used as an example to verify the validity of the model. The results show that the proposed model outperforms the other models in most cases, respectively, which verifies the effectiveness of the proposed model in this paper. [ABSTRACT FROM AUTHOR]

In recent years, with the development of pelagic fishing, the working environment and monitoring of crew (squid jigger) members have become increasingly important. However, traditional methods of pelagic human observers suffer from high costs, low coverage, poor timeliness, and susceptibility to subjective factors. In contrast, the Electronic Monitoring System (EMS) has advantages such as continuous operation under various weather conditions; more objective, transparent, and efficient data; and less interference with fishing operations. This paper shows how the 3DCNN model, LSTM+ResNet model, and TimeSformer model are applied to video-classification tasks, and for the first time, they are applied to an EMS. In addition, this paper tests and compares the application effects of the three models on video classification, and discusses the advantages and challenges of using them for video recognition. Through experiments, we obtained the accuracy and relevant indicators of video recognition using different models. The research results show that when NUM_FRAMES is set to 8, the LSTM+ResNet-50 model has the best performance, with an accuracy of 88.47%, an F 1 score of 0.8881, and an m a p score of 0.8133. Analyzing the EMS for pelagic fishing can improve China's performance level and management efficiency in pelagic fishing, and promote the development of the fishery knowledge service system and smart fishery engineering. [ABSTRACT FROM AUTHOR]

Owing to the rapid expend of the global economy and the increasingly fierce competition among enterprises, scientific and modern management has been gradually adopted in the transaction processing of enterprises. Especially for the show appraisal of enterprises, the traditional appraisal has a lot of subjective influence of managers, so the traditional show appraisal methods cannot meet the need for survival and expend of enterprises. The pressure of talent demand is increasing, which makes many enterprises pay more attention to whether their own mankind resource management system supports the company's strategic spend and can win advantages in the competition of talent structure, organizational structure, and management process. Numerous foreign enterprises use mankind resource audit to achieve this goal, but at present, there is little practice in China that enterprise show evaluation is an important basic work and core content of mankind resource management and expend. Improving the effectiveness of enterprise show evaluation is of great significance to increase the core competitiveness of enterprises and promote the sustainable expend of enterprises. Therefore, this paper designs a model based on collaborative filtering algorithm to analyze the show of mankind resource management of enterprises and has achieved good results. Compared with the original algorithm, the model designed in this paper has a 65.4% improvement in algorithm, which will greatly simplify the calculation process and improve the model processing efficiency. The numerical results show that there is an inevitable linear correlation between mankind resource management and enterprise show. This index can reflect that the accuracy of the model has been enhanced by 74.3%. [ABSTRACT FROM AUTHOR]

Frequent outbreaks of cyanobacterial blooms have become one of the most challenging water ecosystem issues and a critical concern in environmental protection. To overcome the poor stability of traditional detection algorithms, this paper proposes a method for detecting cyanobacterial blooms based on a deep-learning algorithm. An improved vegetation-index method based on a multispectral image taken by an Unmanned Aerial Vehicle (UAV) was adopted to extract inconspicuous spectral features of cyanobacterial blooms. To enhance the recognition accuracy of cyanobacterial blooms in complex scenes with noise such as reflections and shadows, an improved transformer model based on a feature-enhancement module and pixel-correction fusion was employed. The algorithm proposed in this paper was implemented in several rivers in China, achieving a detection accuracy of cyanobacterial blooms of more than 85%. The estimate of the proportion of the algae bloom contamination area and the severity of pollution were basically accurate. This paper can lay a foundation for ecological and environmental departments for the effective prevention and control of cyanobacterial blooms. [ABSTRACT FROM AUTHOR]