Search

Polycrystalline samples and single crystals of four members of the new complex boride series Ti3−xRu5−yIryB2+x (0 ≤ x ≤ 1 and 1 < y < 3) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere. The new silvery phases were structurally characterized by powder and single-crystal X-ray diffraction as well as energy- and wavelength-dispersive X-ray spectroscopy analyses. They crystallize with the tetragonal Ti3Co5B2 structure type in space group P4/mbm (No. 127). Tetragonal prisms of Ru/Ir atoms are filled with titanium in the boron-poorest phase (Ti3Ru2.9Ir2.1B2). Gradual substitution of titanium by boron then results in the successive filling of this site by a Ti/B mixture en route to the complete boron occupation, leading to the boron-richest phase (Ti2Ru2.8Ir2.2B3). Furthermore, both ruthenium and iridium share two sites in these structures, but a clear Ru/Ir site preference is found. First-principles density functional theory calculations (Vienna ab initio simulation package) on appropriate structural models (using a supercell approach) have provided more evidence on the stability of the boron-richest and -poorest phases, and the calculated lattice parameters corroborate very well with the experimentally found ones. Linear muffin-tin orbital atomic sphere approximation calculations further supported these findings through crystal orbital Hamilton population bonding analyses, which also show that the Ru/Ir−B and Ru/Ir−Ti heteroatomic interactions are mainly responsible for the structural stability of these compounds. Furthermore, some stable and unstable phases of this complex series could be predicted using the rigid-band model. According to the density of states analyses, all phases should be metallic conductors, as was expected from these metal-rich borides. [ABSTRACT FROM AUTHOR]

Polycrystalline samples and single crystals of the complex boride Ti9Fe2Ru18B8 were synthesized by arc-melting the elements and characterized by single-crystal X-ray diffraction and energy-dispersive X-ray analysis. Ti9Fe2Ru18B8 is a new substitutional variant of the Zn11Rh18B8 structure type, space group P4/mbm (No. 127), whose remarkable feature is that it contains one-dimensional chains of dumbbells of magnetically active Fe atoms, which form "ladders" along the c axis. The Fe-Fe distance within a dumbbell is 2.489(2) Å, and the Fe2-Fe2 distance between two dumbbells is 2.968(1) Å; in contrast, the chains are well-separated from each other by distances of at least 11.217(2) Å. According to the results of tight-binding electronic structure calculations, Ru-B and Ti-Ru contacts are responsible for the structural robustness, while Fe-Fe interactions influence the magnetic behavior, According to magnetization measurements, Ti9Fe2Ru18B8 orders ferromagnetically between 10 and 200 K. A model for ferromagnetism in this ladder-based structure identifies ferromagnetic coupling among neighboring spin-triplet Fe2 dimers along the c axis as the origin of the magnetic behavior. [ABSTRACT FROM AUTHOR]

Conspectus: Boron's unique chemical properties and its reactions with metals have yielded the large class of metal borides with compositions ranging from the most boron-rich YB66 (used as monochromator for synchrotron radiation) up to the most metal-rich Nd2Fe14B (the best permanent magnet to date). The excellent magnetic properties of the latter compound originate from its unique crystal structure to which the presence of boron is essential. In general, knowing the crystal structure of any given extended solid is the prerequisite to understanding its physical properties and eventually predicting new synthetic targets with desirable properties. The ability of boron to form strong chemical bonds with itself and with metallic elements has enabled us to construct new structures with exciting properties. In recent years, we have discovered new boride structures containing some unprecedented boron fragments (trigonal planar B4 units, planar B6 rings) and low-dimensional substructures of magnetically active elements (ladders, scaffolds, chains of triangles). The new boride structures have led to new superconducting materials (e.g., NbRuB) and to new itinerant magnetic materials (e.g., Nb6Fe1-xIr6+xB8). The study of boride compounds containing chains (Fe-chains in antiferromagnetic Sc2FeRu5B2), ladders (Fe-ladders in ferromagnetic Ti9Fe2Rh18B8), and chains of triangles (Cr3 chains in ferrimagnetic and frustrated TiCrIr2B2) of magnetically active elements allowed us to gain a deep understanding of the factors (using density functional theory calculations) that can affect magnetic ordering of such low-dimensional magnetic units. We discovered that the magnetic properties of phases containing these magnetic subunits can be drastically tuned by chemical substitution within the metallic nonmagnetic network. For example, the small hysteresis (measure of magnetic energy storage) of Ti2FeRh5B2 can be successively increased up to 24-times by gradually substituting Ru for Rh, a result that was even surpassed (up to 54-times the initial value) for Ru/Ir substitutions. Also, the type of long-range magnetic interactions could be drastically tuned by appropriate substitutions in the metallic nonmagnetic network as demonstrated using both experimental and theoretical methods. It turned out that Ru-rich and valence electron poor metal borides adopting the Ti3Co5B2 or the Th7Fe3 structure types have dominating antiferromagnetic interactions, while in Rh-rich (or Ir-rich) and valence electron rich phases ferromagnetic interactions prevail, as found, for example, in the Sc2FeRu5-xRhxB2 and FeRh6-xRuxB3 series. Fascinatingly, boron clusters (e.g., B6 rings) even directly interact in some cases with the magnetic subunits, an interaction which was found to favor the Fe-Fe magnetic exchange interactions in the ferromagnetic Nb6Fe1-xIr6+xB8. Using less expensive transition metals, we have recently predicted new itinerant magnets, the experimental proof of which is still pending. Furthermore, new structures have been discovered, all of which are being studied experimentally and computationally with the aim of finding new superconductors, magnets, and mechanically hard materials. A new direction is being pursued in our group, as binary and ternary transition metal borides show great promise as efficient water splitting electrocatalysts at the micro- and nanoscale. [ABSTRACT FROM AUTHOR]

The prolific Ti3Co5B2 structure type has produced exciting materials with tunable magnetic properties, ranging from soft magnetic Ti2FeRh5B2, to semihard magnetic Ti2FeRu4RhB2 and hard magnetic Sc2FeRu3Ir2B2. Density functional theory (DFT) was employed to investigate their spin-orbit coupling effect, spin exchange, and magnetic dipole-dipole interactions in order to understand their magnetic anisotropy and relate it to their various coercivities, with the objective of being able to predict new materials with large magnetic anisotropy. Our calculations show that the contribution of magnetic dipole-dipole interactions to the magnetocrystalline anisotropy energy (MAE) in Ti3Co5B2-type compounds is much weaker than the spin-orbit coupling effect, and Sc2FeRu3Ir2B2 has, by far, the largest MAE and strong intrachain and interchain Fe-Fe spin exchange coupling, thus confirming its hard magnetic properties. We then targeted materials containing the more earth-abundant and less expensive Co, instead of Rh, Ru or Ir, so that our study started with Ti3Co5B2, which we found to be nonmagnetic. In the next step, substitutions on the Ti sites in Ti3Co5B2 led to new potential quaternary phases with the general formula T2T'Co5B2 (T = Ti, Hf; T' = Mn, Fe). For Hf2MnCo5B2, we found a large MAE (+0.96 meV/f.u.) but relatively weak interchain Mn-Mn spin exchange interactions, whereas for Hf2FeCo5B2, there is a relatively smaller MAE (+0.17 meV/f.u.) but strong Fe-Fe interchain and intrachain spin exchange interactions. Therefore, these two Co-rich phases are predicted to be new rare-earth-free, semihard to hard magnetic materials. [ABSTRACT FROM AUTHOR]

Single-phase polycrystalline samples of the compounds MRh6B3 (M = Fe, Co) as well as single crystals of CoRh6B3 have been synthesized by arc-melting the elements under a purified argon atmosphere in a water-cooled copper crucible. The characterization of the new phases was achieved by using single-crystal and powder X-ray diffraction as well as EDX measurements. The two phases are isotypic and crystallize in the hexagonal Th7Fe3 structure type (space group P63mc, no. 186, Z = 2). In this structure, the magnetically active atoms (Fe, Co) are preferentially found on only one of the three available rhodium sites, and together with rhodium they build a three-dimensional network of interconnected (Rh/M)3 triangles. Magnetic properties investigations show that both phases order ferromagnetically below Curie temperatures of 240 K (for FeRh6B3) and 150 K (for CoRh6B3). First-principles DFT calculations correctly reproduce not only the lattice parameters but also the ground state magnetic ordering in the two phases. These calculations also show that the long-range magnetic ordering in both phases occurs via indirect ferromagnetic coupling between the iron atoms mediated by rhodium. This magnetic structural model also predicts the saturation magnetizations to be 4.02 μB for FeRh6B3 (3.60 μB found experimentally) and 2.75 μB for CoRh6B3. Furthermore, both phases are predicted to be metallic conductors as expected for these intermetallic borides. [ABSTRACT FROM AUTHOR]

The electronic structures of "Ti9-nFe2+nRu18B8" (n= 0, 0.5, 1, 2, 3); in connection to the recently synthesized Ti9-nFe2+n-RU18B8(n = 1, 2), have been investigated and analyzed using LSDA tight-binding calculations to elucidate the distribution of Fe and Ti, to determine the maximum Fe content, and to explore possible magnetic structures to interpret experimental magnetization results. Tbrough a combination of calculations on specific models and using tbe rigid band approximation, which is validated by the DOS curves for "T9-nFe2+nRu18B8" (n = 0, 0.5, 1, 2,3), mixing of Fe and Ti is anticipated at both tbe 2b- and 4h-chain sites. The model "Ti8.5Fe2.5Ru18B8" (n = 0.5) revealed that both Brewer-type Ti-Ru interactions as well as ligand field splitting ofthe Fe 3d orbitals regulated the observed valence electron counts between 220 and 228 electrons/formula unit. Finally, models of magnetic structures were created using "Ti6Fe5Ru18B8" (n = 3). A rigid band analysis of tbe LSDA DOS curves concluded preferred ferromagnetic ordering at low Fe content (n ⩽ 0.75) and ferrimagnetic ordering at higher Fe content (n > 0.75). Ferrimagnetism arises from antiferromagnetic exchange coupling in the scaffold of Fel-ladder and 4h-chain sites. [ABSTRACT FROM AUTHOR]

Synthesis, structure determination, and magnetic properties are reported for the metastable and crystal-chemically isotypic phases cobalt carbodiimide, CoNCN, and nickel carbodiimide, NiNCN, adopting the hexagonal system and space group P63/mmc (NiAs type) with interatomic distances of Co-N = 2.17 Å and Ni-N = 2.12 Å and an octahedral coordination of the transition-metal ions; the NCN2- units reveal the carbodiimide shape with two CN double bonds. The low-susceptibility data go back to strong antiferromagnetic spin-spin coupling, similar to the behavior of the electronically related oxides CoO and NiO. [ABSTRACT FROM AUTHOR]

Ba3Pt4Al4 was prepared from the elements in niobium ampules and crystallizes in an orthorhombic structure, space group Cmcm (oP44, a = 1073.07(3), b = 812.30(3), c = 1182.69(3) pm) isopointal to the Zintl phase A2Zn5As4 (A = K, Rb). The structure features strands of distorted [Pt4Al4] heterocubane-like units connected by condensation over Pt/Al edges. These are arranged in a hexagonal rod packing by further condensation over Pt and Al atoms with the barium atoms located inside cavities of the [Pt4Al4]δ− framework. Structural relaxation confirmed the electronic stability of the new phase, while band structure calculations indicate metallic behavior. Crystal orbital Hamilton bonding analysis coupled with Bader effective charge analysis suggest a polar intermetallic phase in which strong Al-Pt covalent bonds are present, while a significant electron transfer from Ba to the [Pt4Al4]δ− network is found. By X-ray photoelectron spectroscopy measurements the Pt 4f5/2 and 4f7/2 energies for Ba3Pt4Al4 were found in the range of those of elemental Pt due to the electron transfer of Ba, while PtAl and PtAl2 show a pronounced shift toward a more cationic platinum state. 27Al magic-angle spinning NMR investigations verified the two independent crystallographic Al sites with differently distorted tetrahedrally coordinated [AlPt4] units. Peak assignments could be made based on both geometrical considerations and in relation to electric field gradient calculations. [ABSTRACT FROM AUTHOR]

Analysis of the electronic density of states of the hypothetical ternary double-perovskite-like phases "Sc2T6B (T = Ir, Pd, Ni)" reveals the presence of deep and large pseudogaps between 61 and 68 valence electrons (VE) as well as a strong peak at 69 VEs. Subsequently, crystal orbital Hamilton population (COHP) bonding analysis shows that the heteroatomic T--B and Sc--T interactions are optimized in Sc2Ir6B (63 VE) but not in "Sc2Pd6B (69 VE)" and "Sc2Ni6B (69 VE)", thus indicating less stability for these VE-richer phases. These findings point out the possibility of discovering new double-perovskite-like borides through chemical substitution and lead to the study of the Sc2Ir6-xPdxB and Sc2Ir6-xNixB (x = 0-6; VE = 63-69) series, for which powder samples and single crystals were synthesized by arc melting the elements. Superstructure reflections were observed in the powder diffractograms of Sc2Ir6-xPdxB and Sc2Ir6-xNixB for x = 0-5 and VE = 63-68, thereby showing that these phases crystallize in the double-perovskite-like Ti2Rh6B-type structure (space group Fm3m, Z = 4). Single-crystal and Rietveld refinement results confirm and extend these findings because Pd (or Ni) is found to mix exclusively with Ir in all quaternary compositions. For x = 6, no superstructure reflections were observed, in accordance with the theoretical expectation for the 69 VE phases. [ABSTRACT FROM AUTHOR]

Thequinary members of the complex boride series Sc2FeRu5–xIrxB2were synthesized by arc melting the elementsand characterized by powder and single-crystal X-ray diffraction aswell as metallographic and energy-dispersive X-ray analyses. The useof a 4d/5d mixture allows distinguishing these elements with X-raydiffraction methods, thus enabling the study of site preference andits influence on the magnetic properties. [ABSTRACT FROM AUTHOR]

Members of the solid solution series of CeRu1-xNixAl can be obtained directly by arc melting of the elements. The presented compounds with 0.1 ≤ x ≤ 0.85 crystallize in the orthorhombic space group Pnma (No. 62) in the LaNiAl structure type, while for 0.9 ≤ x ≤ 1, the hexagonal ZrNiAl-type structure is found. The orthorhombic members exhibit an anomaly in the trend of the lattice parameters as well as an interesting behavior of the magnetic susceptibility, suggesting that the cerium cations exhibit no local moment. Besides the mixed-valent nature of the cerium cations, valence fluctuations along with a change in the cerium oxidation state depending on the nickel content have been found. The oxidation state has been determined from the magnetic data and additionally by XANES. Density functional theory calculations have identified the shortest Ce-Ru interaction as decisive for the stability of the orthorhombic solid solution. [ABSTRACT FROM AUTHOR]

Transition-metal borides show not only promising physical properties but also a rich variety of crystal structures. In this context, quantum-chemical tools can shed light on important facets of the chemistry within such intermetallic borides. Using density-functional theory (DFT), we analyze in detail two phases of significant structural-chemical importance: the recently synthesized Ti1+xOs2-xRuB2 and the isotypical Ti1+xOs3-xB2. Starting from the observation of different Ti/Os occupations in X-ray crystal structure analysis, we assess suitable computational models and rationalize how the interplay of Ti-Ti, Ti-Os, and Os-Os bonds drives the site preferences. Then, we move on to a systematic investigation of the metal-boron bonds which embed the characteristic, trigonal-planar B4 units within their metallic surroundings. Remarkably, the different Ti-B bonds in Ti1+xOs2-xRuB2 (and also in its ternary derivative) are of vastly different strength, and the strength of these bonds does not correlate with their length. The tools presented in this work are based on simple and insightful chemical arguments together with DFT, and may subsequently be transferred to other intermetallic phases-transition-metal borides and beyond. [ABSTRACT FROM AUTHOR]

Single-phase polycrystalline samples and single crystals of the complex boride phases Ti8Fe3Ru18B8 and Ti7Fe4Ru18B8 have been synthesized by arc melting the elements. The phases were characterized by powder and single-crystal X-ray diffraction as well as energy-dispersive X-ray analysis. They are new substitutional variants of the Zn11Rh18B8 structure type, space group P4/mbm (no. 127). The particularity of their crystal structure lies in the simultaneous presence of dumbbells which form ladders of magnetically active iron atoms along the [001] direction and two additional mixed iron/titanium chains occupying Wyckoff sites 4h and 2b. The ladder substructure is ca. 3.0 Å from the two chains at the 4h, which creates the sequence chain-ladder-chain, establishing a new structural and magnetic motif, the scaffold. The other chain (at 2b) is separated by at least 6.5 Å from this scaffold. According to magnetization measurements, Ti8Fe3Ru18B8 and Ti7Fe4Ru18B8 order ferrimagnetically below 210 and 220 K, respectively, with the latter having much higher magnetic moments than the former. However, the magnetic moment observed for Ti8Fe3Ru18B8 is unexpectedly smaller than the recently reported Ti9Fe2Ru18B8 ferromagnet. The variation of the magnetic moments observed in these new phases can be adequately understood by assuming a ferrimagnetic ordering involving the three different iron sites. Furthermore, the recorded hysteresis loops indicate a semihard magnetic behavior for the two phases. The highest Hc value (28.6 kA/m), measured for Ti7Fe4Ru18B8, lies just at the border of those of hard magnetic materials. [ABSTRACT FROM AUTHOR]