Search

0D organic metal halide hybrids (OMHHs) have recently emerged as a new generation of scintillation materials, due to their high luminescence quantum efficiency, sensitivity, stability, and cost‐effectiveness. While numerous 0D OMHH scintillators have been developed to date, most of them are based on solution grown single crystals that require time‐consuming synthesis and are limited in size. Here, high‐performance X‐ray scintillators based on facile solution processed 0D OMHH amorphous films are reported for the first time. By reacting triphenyl(9‐phenyl‐9H‐carbazol‐3‐yl) phosphonium bromide (TPPcarzBr) with manganese bromide (MnBr2), 0D (TPPcarz)₂MnBr₄ amorphous films can be prepared via solution processing with mild thermal annealing, which exhibits green photoluminescence with an emission maximum ≈517 nm and a photoluminescence quantum efficiency of ≈87%. The X‐ray scintillation of 0D (TPPcarz)₂MnBr₄ amorphous films is characterized to exhibit a light yield of 44600 photon MeV−1 and an outstanding linearity with a low limit of detection of 32.42 nGyairs−1 over a wide range of X‐ray dose rates. The versatile processability of 0D (TPPcarz)₂MnBr₄ is illustrated with remarkable recyclability, high cost‐effectiveness, and scalability for large‐scale production. By taking advantage of the amorphous nature of newly designed OMHHs, the approach opens up new opportunities for developing high‐performance, solution‐processable scintillators. [ABSTRACT FROM AUTHOR]

Copper(I) halide cluster‐based coordination compounds have attracted significant attention in the development of novel scintillators due to their mild synthesis methods, high luminescence efficiency, tunable emission wavelength, high‐Z element incorporation, and large structural diversity. However, a major obstacle for these crystalline materials with covalent/coordination network structures is their insolubility, which poses significant challenges for the low‐cost and large‐scale production of scintillation films. In this study, copper(I) iodide and benzotriazole derivative ligands with diverse cationic substituents are employed to fabricate all‐in‐one (AIO) colloidal copper(I) iodide cluster‐based scintillator suspensions. These suspensions, characterized by distinctive ionic and coordination bonds, are synthesized via confined growth in the presence of polyvinylpyrrolidone (PVP). Furthermore, they demonstrate exceptional compatibility with polymer matrices, facilitating the production of uniform and flexible scintillation films with highly efficient radioluminescence through blade coating. The resulting films achieved an excellent spatial resolution of 17 lp mm−1. This surfactant‐assisted fabrication method for colloidal scintillators, combined with microelectronic printing for film preparation, demonstrates significant potential for developing flexible scintillation films for high‐resolution X‐ray imaging. [ABSTRACT FROM AUTHOR]

Efficient and stable scintillators play a crucial role in X‐ray detection applications. To enhance the luminescence efficiency under X‐ray excitation, the incorporation of multiple emission centers into scintillators is widely explored. Here, it is found that the cesium copper halide Cs5Cu3Cl6I2 exhibits dual emission centers, enabling high‐performance scintillators with an X‐ray light yield of 49000 photon MeV−1 and a low detection limit of 4 nGy s−1. The emissions of Cs5Cu3Cl6I2 are from intrinsic self‐trapped exciton (STE) and Frenkel defect‐assisted STE. High‐energy X‐rays can induce an increased fraction of Frenkel defect‐assisted STEs, which can serve as an effective scintillation channel. Furthermore, large‐area flexible scintillators with a high resolution of 18 lp mm−1 are developed, making them suitable for X‐ray imaging applications. These findings offer promising insights for developing more efficient scintillators. [ABSTRACT FROM AUTHOR]

The aim of this study was to experimentally assess the luminescence efficiency of a cerium fluoride (CeF3) inorganic scintillator in crystal form as a possible alternative to high-luminescence but hygroscopic cerium bromide (CeBr3). The experiments were performed under typical diagnostic radiology X-rays (50–140 kVp). Parameters such as the crystal's absolute luminescence efficiency (AE) and the spectral matching with a series of optical detectors were examined. The replacement of bromine with fluorine appeared to drastically reduce the AE of CeF3 compared to CeBr3 and other commercially available inorganic scintillators such as bismuth germanate (Bi4Ge3O12-BGO). CeF3 reaches a maximum luminescence efficiency value of only 0.8334 efficiency units (EUs) at 140 kVp, whereas the corresponding values for CeBr3 and BGO were 29.49 and 3.41, respectively. Furthermore, the emission maximum (at around 313 nm) moved towards the lower part of the visible spectrum, making CeF3 suitable for spectral coupling with various photocathodes and photomultipliers applied in nuclear medicine detectors, but completely unsuitable for spectral matching with CCDs and CMOS. The obtained luminescence efficiency results denote that CeF3 cannot be applied in medical imaging applications covering the range 50–140 kVp; however, examination of its luminescence output in the nuclear medicine energy range (~70 to 511 keV) could reveal possible applicability in these modalities. [ABSTRACT FROM AUTHOR]

High-energy radiation detection and imaging technology has significant applications in high-energy physics research, medical imaging, and industrial monitoring. Lead-free metal halides exhibit exceptional potential for conducting indirect detection of high-energy radiation due to their characteristics of low toxicity, strong stability, high light yield, and large Stokes shift. This paper reviews the most recent advances in lead-free metal halide scintillator materials for X-ray imaging. Subsequently, it lists the most important parameters of scintillator performance and introduces the production procedures for single crystal, powder, and nanocrystal scintillators. Furthermore, it discusses the manufacturing of scintillator films with improved performance, focusing on large-area flexible scintillator films and the coupling with microstructures. Finally, it discusses current challenges and opportunities for enhancing X-ray imaging using lead-free metal halide scintillator materials. [ABSTRACT FROM AUTHOR]

Dense and transparent ceramic samples of a (Gd,Y)3Al2Ga3O12:Ce scintillator were obtained by using stereolithography-based Digital Light Processing (DLP) 3D printing for compacting, subsequent burnout, and pressureless sintering. The effects of stoichiometric deviations and green body compaction methods (uniaxial pressing versus DLP 3D printing) on the optical, luminescent, and scintillation properties of ceramics were analyzed. An excess of Y and Gd in the composition led to an increase in transmittance and to the acceleration of the scintillation kinetics. Moreover, transparent ceramics made of 3D-printed green bodies were found to be superior in light yield to the samples, which were prepared from the same powders and densified by uniaxial pressing. [ABSTRACT FROM AUTHOR]

Lanthanide nanoparticle (LnNP) scintillators exhibit huge potential in achieving radionuclide‐activated luminescence (radioluminescence, RL). However, their structure–activity relationship remains largely unexplored. Herein, progressive optimization of LnNP scintillators is presented to unveil their structure‐dependent RL property and enhance their RL output efficiency. Benefiting from the favorable host matrix and the luminescence‐protective effect of core–shell engineering, NaGdF4 : 15 %Eu@NaLuF4 nanoparticle scintillators with tailored structures emerged as the top candidates. Living imaging experiments based on optimal LnNP scintillators validated the feasibility of laser‐free continuous RL activated by clinical radiopharmaceuticals for tumor multiplex visualization. This research provides unprecedented insights into the rational design of LnNP scintillators, which would enable efficient energy conversion from Cerenkov luminescence, γ‐radiation, and β‐electrons into visible photon signals, thus establishing a robust nanotechnology‐aided approach for tumor‐directed radio‐phototheranostics. [ABSTRACT FROM AUTHOR]

Bound states in the continuum (BIC) have attracted a great deal of attention in all-dielectric nanophotonics due to their ability to provide spectral features with a very high-quality factor. By definition, BIC cannot be observed in the far field because of the symmetry mismatch with the modes propagating in free space. Despite this, in systems with slightly reduced symmetry, the condition for BIC is lifted, which gives rise to the high-quality resonant features in their optical response. In particular, in photonic crystal slabs, which support the BIC states, the symmetry reduction allows modification of light propagation, reflection, or emission. In this work, using the photonic crystal slabs with embedded Ge nanoislands, we have shown the ability to control their light emission features by symmetry breaking. It was demonstrated that such symmetry breaking due to a change in the basis vectors of the photonic crystal unit cell or a change in the unit cell internal structure could provide independent control knobs to alter the spectral position of photonic crystal modes, their dispersion, and degeneracy. The obtained results reveal additional ways to manage the light emission of active media in photonic crystal slabs. [ABSTRACT FROM AUTHOR]

The high durability under harsh environment including high temperature, high humidity, and high radiation is required for scintillators used for decommissioning of nuclear facilities and radiation monitoring in nuclear fusion reactors. α‐SiAlON ceramics are highly potential for such scintillators because of their thermal and mechanical durability and luminescence corresponding to doped rare‐earth ion. In this study, scintillation properties of transparent Lu‐α‐SiAlON:Ce3+ ceramics were investigated for the first time. Lu‐α‐SiAlON:Ce3+ showed the scintillation responses to α‐rays and X‐rays. The α‐rays‐induced scintillation decay curve consists of two components whose decay time are 48 and 652 ns. The faster decay component most presumably results from 4f‐5d transition of Ce3+, whereas the origin of the slower one is unclear but may be defects in α‐SiAlON. The light yield of the Lu‐α‐SiAlON:Ce3+ ceramics was 1300 photons 5.5 MeV−1. [ABSTRACT FROM AUTHOR]

Lanthanide‐doped scintillators have the ability to convert the absorbed X‐ray irradiation into ultraviolet (UV), visible (Vis), or near‐infrared (NIR) light. Lanthanide‐doped scintillators with excellent persistent luminescence (PersL) are emerging as a new class of PersL materials recently. They have attracted great attention due to their unique "self‐luminescence" characteristic and potential applications. In this review, we comb through and focus on current developments of lanthanide‐doped persistent luminescent scintillators (PersLSs), including their PersL mechanism, synthetic methods, tuning of PersL properties (e. g. emission wavelength, intensity, and duration time), as well as their promising applications (e. g. information storage, encryption, anti‐counterfeiting, bio‐imaging, and photodynamic therapy). We hope this review will provide valuable guidance for the future development of PersLSs. [ABSTRACT FROM AUTHOR]

Chiral hybrid metal halides hold great potential as circularly polarized luminescence light sources. Herein, we have obtained two enantiomeric pairs of one‐dimensional hybrid chiral manganese(II) chloride single crystals, R/S‐(3‐methyl piperidine)MnCl3 (R/S‐1) and R/S‐(3‐hydroxy piperidine)MnCl3 (R/S‐2), crystallizing in the non‐centrosymmetric space group P212121. In comparison to R/S‐1, R/S‐2 single crystals not only show red emission with near‐unity photoluminescence quantum yield (PLQY) and high resistance to thermal quenching but also exhibit circularly polarized luminescence with an asymmetry factor (glum) of 2.5×10−3, which can be attributed to the enhanced crystal rigidity resulting from the hydrogen bonding networks between R/S‐(3‐hydroxy piperidine) cations and [MnCl6]4− chains. The circularly polarized luminescence activities originate from the asymmetric [MnCl6]4− luminophores induced by N−H⋅⋅⋅Cl hydrogen bonding with R/S‐(3‐hydroxy piperidine). Moreover, these samples demonstrate great application potential in circularly polarized light‐emitting diodes and X‐ray scintillators. This work shows a highly efficient photoluminescent Mn‐based halide and offers a strategy for designing multifunctional chiral metal halides. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, spatial resolution, and detection sensitivity are desirable for X‐ray imaging. Howerer, it remains challenging to improve the light yield and radiation detection capability of alkali metal rare‐earth fluoride (ALnF4). Herein, a type of Cu2+ ion heterovalent co‐doped LiLuF4:Tb,Cu microcrystalline scintillation material with high light yield, persistent, and thermostimulated luminescence is obtained by defect engineering. The heterovalent codoping strategy not only increases the radioluminescence (RL) intensity, but also introduces more carrier traps in the material to enhance the long‐afterglow and thermoluminescence intensity of LiLuF4:Tb microcrystals. After doping of 3 mol% Cu2+ ions, the RL efficiency is increased by 88.61%, and the X‐ray detection limit of LiLuF4:Tb,Cu reaches 2.7928 nGy·s‒1. This detectivity is considerably lower than the medical imaging requirements (5.5 µGy·s‒1). Furthermore, a large‐area flexible scintillation film of dimensions 30 × 30 cm2 is prepared to achieve high spatial resolution X‐ray imaging of 22 LP mm−1@MTF(modulation transfer function) = 0.2. Besides, this flexible film enables X‐ray imaging of curved objects and stores optical information for >48 h. This work provides a paradigm for improving the RL intensity and X‐ray detection sensitivity of alkali rare‐earth fluorides by crystal defect engineering, and enriches X‐ray high resolution extended imaging applications. [ABSTRACT FROM AUTHOR]

The synthesis and characterization of cerium-doped lanthanum fluoride (La(1−x)CexF3) nanocrystals have been carried out. The surfaces of La(1−x)CexF3 nanocrystals were modified with oleic acid using the co-precipitation technique, and then doped with cerium with various mole fractions (x) = 0.05, 0.10, 0.15, 0.20, and 0.25. The nanocrystals produced were characterized for their crystal structure using x-ray diffraction (XRD), their morphology by transmission electron microscopy (TEM), their functional group identification using Fourier-transform infrared (FTIR), and Raman spectroscopy, and their photoluminescence behavior using photoluminescence (PL) spectroscopy. Detailed investigations revealed that, based on the XRD data and TEM images, La(1−x)CexF3 exhibits trigonal-structured nanocrystals with the symmetry space group P-3c1. Among the samples, La0.75Ce0.25F3 exhibited the sharpest PL peak. The PL spectra for La0.75Ce0.25F3 nanocrystals excited at 370 nm and showed an intense emission peak at 495 nm with a lifetime τ = 1.523 × 10−10 s. This emission was assigned to the 5d → 4f (2F5/2 and 2F7/2) transitions of Ce3+ energy levels, indicating a luminescence center mechanism. These results indicate that the synthesized La0.75Ce0.25F3 is a promising phosphor material for detector scintillators. [ABSTRACT FROM AUTHOR]

Upconversion nanoparticles (UCNPs), particularly those that are highly doped, possess outstanding properties and have demonstrated tremendous application potential. However, novel fine-tuning strategies are urgently required to enhance the upconversion luminescence (UCL) performance of UCNPs. In this study, a series of core–multishell UCNPs highly doped with Ho3+ and Yb3+ ions were synthesized via the oleate route. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and UCL spectra and decay times, and pump power dependency of the synthesized UCNPs were used to examine their morphology, size, and the UCL properties. Ce3+ ions were introduced to enhance Ho3+-based red UCL, and their doping strategy was also optimized based on summarized UCL trends and detailed UCL mechanism analysis. NaHoF 4 :Gd3+@NaGdF 4 :Yb3+,Ce3+@NaGdF 4 :Yb3+ UCNPs that had 10 mol% Ce3+ dopants in their middle shells exhibited better UCL properties than the larger traditional NaGdF 4 :Yb3+,Ce3+,Ho3+ UCNPs, probably because of the combined influence of the energy interactions between the Ce3+ ions and surface groups, sensitizing energy enhancement by active shells, and the positive cooperation between the Ce3+ ions and highly-doped core–shell structures. In this study, the phenomenon of UCL decrease resulting from Ce3+ ion doping was explored. Using unique core–multishell structures with highly-doped activators and sensitizers placed within and outside the structures, respectively, the UCL decrease due to Ce3+ ion doping was attributed to a competition for photons. Doping the UCNPs with Ce3+ ions near the UCNP surfaces favors Ho3+-based red UCL. Our study findings can deepen the understanding of the Ho3+-based UCL mechanisms and increase the potential uses of NaHoF 4 materials in photo-induced therapy. When Ce3+ ions are doped near the nanoparticle surface, they might have energy interactions with surface groups to relieve phonon energy shortage and thus enhance the efficiency of cross-relaxation between Ho3+ and Ce3+ ions. [Display omitted] [ABSTRACT FROM AUTHOR]

Near‐infrared (NIR) luminescent metal halide (LMH) materials have attracted great attention in various optoelectronic applications due to their low‐temperature solution‐processable synthesis, abundant crystallographic/electronic structures, and unique optoelectronic properties. However, some challenges still remain in their luminescence design, performance improvement, and application assignments. This review systematically summarizes the development of NIR LMHs through classifying NIR luminescent origins into four major categories: band‐edge emission, self‐trapped exciton (STE) emission, ion emission, and defect‐related emission. The luminescence mechanisms of different types of NIR LMHs are discussed in detail by analyzing typical examples. Reasonable strategies for designing and optimizing luminescence/optoelectronic properties of NIR LMHs are summarized, including bandgap engineering, self‐trapping state engineering, chemical composition modification, energy transfer, and other auxiliary strategies such as improvement of synthesis scheme and post‐processing. Furthermore, application prospects based on the optoelectronic devices are revealed, including phosphor‐converted light‐emitting diodes (LEDs), electroluminescent LEDs, photodetectors, solar cells, and x‐ray scintillators, as well as demonstrations of some related practical applications. Finally, the existing challenges and future perspectives on the development of NIR LMH materials are critically proposed. This review aims to provide general understanding and guidance for the design of high‐performance NIR LMHs materials. [ABSTRACT FROM AUTHOR]

Scintillators, owing to their exceptional ability to convert high-energy ionizing radiation into visible light, are the core component of X-ray radiography. However, conventional single-crystal scintillators are inadequate to satisfy the modern social and scientific demands. So, the development of novel scintillator materials is imminent. Herein, a series of Na 5 Lu 9- x Gd x F 32 :Ce3+ glass-ceramics (GCs) scintillators were elaborated by an exercisable and low-cost method. Benefiting from the proper introduction of Al powder and Gd3+, as well as the crystallization of Na 5 Lu 9- x Gd x F 32 nanocrystal (NCs) after heat treatment, luminescence excited by ultraviolet and X-ray of the sample is enhanced significantly. The integrated X-ray excited luminescence intensity of the representative sample can reach up to 128% of that of Bi 4 Ge 3 O 12. More importantly, the sample has excellent irradiation stability that is almost undamaged even exposed to high-energy X-ray radiation. Finally, satisfactory X-ray imaging based on the resultant sample was realized. The spatial resolution is as high as 14 lp mm−1, which exceeds that of many novel perovskite scintillators. Thus, this investigation promotes the development of low-cost, stable and high-performing Ce3+-activated GCs scintillators. • Three effective ways were designed to improve the scintillating property of the sample. • The integrated X-ray excited luminescence reaches 128% of that of Bi 4 Ge 3 O 12. • The sample is undamaged even excited by high-power (12 W) X-ray, infering outstanding irradiation stability. • Satisfactory X-ray imaging based on the sample was achieved. • The spatial resolution reaches 14 lp mm−1, exceeding that of many perovskite scintillators. [ABSTRACT FROM AUTHOR]

Scintillators, which can convert high‐energy particles (X‐rays) into detectable low‐energy ultraviolet–visible–near‐infrared photons, are essential components of X‐ray detectors and show extensive practical applications in nondestructive detection and medical imaging. Traditionally, inorganic scintillators represented by CsI:Tl have achieved definite progress. However, the harsh preparation conditions, high production cost, and poor mechanical properties impede their potential development in the high‐end X‐ray imaging field. Organic–inorganic hybrid metal complexes could be excellent alternatives, by virtue of their structural and spectral tunability, good solution processability, and excellent photophysical properties. This review mainly focuses on eco‐friendly lead‐free metal (Mn2+, Cu+, Sb3+, Sn2+, Ge2+, Ln3+, etc.) complex scintillators. The luminescence mechanisms are introduced and the scintillation performance, such as light yield, limit of detection, imaging resolution, etc., is highlighted. Moreover, the current challenges and perspectives in this emerging field are described. It is hoped to provide some theoretical guidance for the continuous development of the new scintillator systems. [ABSTRACT FROM AUTHOR]

Er3+ doped high density germanate glasses with compositions of 50GeO 2 -10BaO–10Al 2 O 3 -15Lu 2 O 3 -(15-x) La 2 O 3 -xEr 2 O 3 (x = 0, 0.1, 0.5, 1.0, 1.5, and 2.0, in mol%) have been prepared by the melt-quenching method. The optical and physical properties of the samples were characterized by differential scanning calorimetry (DSC), density, transmittance spectra, photoluminescence (PL) spectra, and X-ray excited luminescence (XEL) spectra. The densities were in the range from 5.90 to 6.07 g/cm3. The strong green emissions around 552 nm of Er3+ were observed upon the excitations of 378 nm light and the X-ray, and the lifetimes of 552 nm emission were in the range of 20.88–96.47 μs. The results show that Er3+ doped high density germanate glasses could be used as potential scintillators for X-ray CT. [ABSTRACT FROM AUTHOR]

Radiation detection plays an important role in diverse applications, including medical imaging, security, and display technologies. Scintillators, materials that emit light upon exposure to radiation, have garnered significant attention due to their exceptional sensitivity. Previous research explored polymer dots (P-dots) doped with iridium complexes as nano-sized scintillators for radiation detection, but these were constrained to emitting specific colors like red, green, and blue, limiting their utility. Recently, there has been a breakthrough in the development of white light emitters stimulated by UV–visible light. These emitters exhibit a broad spectral range in the visible wavelength, enhancing contrast and simplifying detection by visible-light sensors. Consequently, the quest for white color scintillators in radiation detection has emerged as a promising avenue for enhancing scintillation efficiency. In this study, we present a novel approach by applying P-dots doped with two iridium complexes to create white light-emitting nano-sized scintillators. These scintillators offer a wider spectral coverage within the visible-light wavelength range. Under UV light (365 nm) excitation, our synthesized P-dots exhibited remarkable white light emission. Moreover, when excited by electron beam irradiation, we observed the clear emission close to white emission which is valuable for improving the detection of radiation. [ABSTRACT FROM AUTHOR]

The photoluminescence (PL) and scintillation properties of Ce-doped BaHfO3 crystals were investigated. The Ce-doped BaHfO3 crystal is transparent and colorless after annealing treatment under a reduction condition. The broad luminescence band at ~370 nm was observed under ~280 nm excitation with the decay time of ~17 ns. The X-ray-induced scintillation spectra also showed the broad luminescence band at ~380 nm with a fast decay. The origin of the broad luminescence band at ~380 nm is attributed to the 5d-4f transition of Ce3+. The pulse height distribution under 137Cs gamma ray irradiation using Ce-doped BaHfO3 exhibited a distinguishable photoabsorption peak. The light yield of Ce-doped BaHfO3 is ~1600 photons/MeV. [ABSTRACT FROM AUTHOR]

The photoluminescence (PL), scintillation, and thermally stimulated luminescence (TSL) properties of Eu-doped (0.01, 0.1, and 1%) Al2O3 single crystals grown by the floating zone method were investigated systematically. The PL of the samples showed several sharp emission peaks across 550-750 nm originating from the 4f-4f transitions of Eu3+ and the 3d-3d transitions of Cr3+ impurity ions. The scintillation spectrum of the samples showed a broad emission peak at 320 nm due to the F+ center and an emission peak at 700 nm due to the 3d-3d transitions of Cr3+ impurity ions. All the samples showed TSL glow peaks at around 200, 320, and 375 °C. The TSL intensity of the 1% Eu-doped sample was the highest among the present three samples, and the TSL response was proportional to the irradiated X-ray dose in the range from 10 to 1000 mGy. The Eu-doped Al2O3 single crystal could be a novel candidate for personal dose monitoring applications. [ABSTRACT FROM AUTHOR]

We synthesized an undoped La2Be2O5 single crystal by the floating zone method and investigated its scintillation properties. The synthesized sample was confirmed to have a singlephase structure of La2Be2O5 as shown by the powder X-ray diffraction pattern. The diffuse transmittance spectrum of the synthesized sample had transmittance at 80% in the range of 250-850 nm. The scintillation spectrum had a broad emission band from 280 to 600 nm, which was derived from unidentified lattice defects. In the scintillation decay profile, the obtained decay time constants were 1.1, 6.2, and 386 ns. From pulse height spectra, the light yield of the La2Be2O5 single crystal was 1000 photons/MeV. In afterglow profiles, the afterglow level was 42.9 ppm. [ABSTRACT FROM AUTHOR]

Due to its short radiation length, moderate light output (8000‐9000 photons/MeV), high density (7.13 g cm−3), and non‐hygroscopicity, etc., Bi4Ge3O12 (BGO) material has been widely utilized as an advanced scintillator for irradiation detection. However, pure BGO cannot meet the requirements for future physics experiments and state‐of‐art industrial facilities coupled with a silicon photomultiplier (SiPM) due to its slow response time, poor radiation resistance, and excessive light output. Herein, a Ce‐doping strategy is reported for efficiently improving the overall performance (e.g., irradiation resistance, decay time, radioluminescence, and light output) of BGO that can be expectedly applied in future high energy physics detection. Ce‐doped BGO (BGO:Ce) displays higher radiation resistance ability under 10 h UV irradiation (97% of original) and a faster fluorescence lifetime (269 ns), superior to pure BGO. Furthermore, BGO:Ce shows ≈30% luminescence intensity of pure BGO, well eliminating the oversaturation of SiPM coupled with scintillation detectors. Theoretical calculations imply that an intense competition between electron or hole traps and Ce ions (Ce3+, Ce4+) can effectively reduce the concentration of color centers, thus enhancing irradiation resistance ability. [ABSTRACT FROM AUTHOR]

With the increasing demands of X‐ray detection and medical diagnosis, organic scintillators with intense and tunable X‐ray excited emission have been becoming important. To guarantee the X‐ray absorption, heavy atoms were widely added in reported organic scintillators, which led to emission quenching. In this work, we propose a new strategy to realize organic scintillators through the host‐guest doping strategy. Then the X‐ray absorption centers (host) and emission centers (guest) are separated. Under X‐ray excitation, these materials displayed intense and readily tunable emissions ranging from green (520 nm) to near infrared (NIR) regions (682 nm). Besides, the relationship between the X‐ray absorption and spatial arrangement of the heavy atoms in the host matrix was also revealed. The potential application of these wide‐range color tunable organic host‐guest scintillators in X‐ray imaging were demonstrated. This work provides a new feasible strategy for constructing high‐performance organic scintillators with tunable luminescence properties. [ABSTRACT FROM AUTHOR]

A single crystal of Zn2Te3O8 (ZTO) was grown using the conventional Czochralski technique. TGA analysis showed that the melting point of ZTO is 681 °C, while it exhibits a structural phase transition at 621 °C. The powder X-ray diffraction analysis of ZTO confirmed that it possesses a single crystalline monoclinic structure with the C2/c space group. An indirect band gap of 3.75 eV was estimated for the ZTO crystal based on its absorption spectrum. The X-ray-induced luminescence of the grown crystal comprised a broad band peaking at 565 nm, which can be tentatively assigned to the self-trapped exciton emission from the (Te3O8)4− molecular complexes. The photoluminescence measured under 280 nm excitation showed a broad band luminescence peaking at about 600 nm, and its intensity was significantly enhanced upon cooling the crystal from 300 K to 10 K. The photoluminescence decay time under 280 nm excitation was shown to have two exponential components in the range from 10 K to 175 K, which became a single exponential upon further heating the crystal. Low scintillation light was observed at room temperature both under α- and β-particle excitations from 241Am and 90Sr sources, respectively. The scintillation light yield measured under β-particle excitation from the 90Sr source was enhanced by about five orders of magnitude at 10 K in comparison to that at 300 K. The scintillation light yield measured at 10 K under the same experimental conditions for ZTO in comparison with the well-known cryogenic scintillator Li2MoO4 (LMO) was shown to have four times higher scintillation light. A single-crystal ingot of ZTO was obtained for the first time; however, it had several cracks due to its phase transition. Notably, scintillation at low temperatures for a Te-based crystal was observed for the first time. These preliminary findings are very promising and show that ZTO will be a good candidate for cryogenic phonon scintillation detectors for the 0νββ decay search of 130Te. [ABSTRACT FROM AUTHOR]

YAG:Ce and LuAG:Ce ceramics are widely used as scintillator materials that convert high‐energy radiation into visible light. For the practical application of such compounds, short decay times are a necessity. One way of shortening the existing decay times even more is to change the local environment of emitting ions by means of doping the matrix with additional elements, for example, boron or magnesium. Furthermore, boron ions also can help absorb gamma rays more efficiently, therefore improving overall applicability. Due to the aforementioned reasons, YAG and LuAG ceramics doped with cerium, boron, and magnesium were synthesized. Initial amorphous powders have been obtained by means of sol–gel synthesis and pressed into pellets under isostatic pressure and finally calcinated to form crystalline ceramics. The effects of boron and magnesium doping on the morphological, structural, and luminescence properties were investigated. The key results showed that doping with boron has indeed shortened the decay times of the garnet pellets. Overall, boron doping of ceramics is a relatively new research area; however, it is rather promising as it helps both to improve the luminescence properties and to increase particle growth rate. [ABSTRACT FROM AUTHOR]

Thermoluminescence (TL) often involves the liberation of a charge carrier (an electron or a hole) from a charge carrier trapping centre into the conduction band (CB) or the valence band (VB) with subsequent recombination with a counter charge carrier at a luminescence centre. TL glow peak analysis can provide the energy ΔEt needed to liberate such charge carrier which then defines the location of the charge transition levels (CTL) of the carrier trapping centres below the CB-bottom or above the VB-top. The temperature at the maximum of the TL glow peak changes 3–4 K per 0.01 eV change in ΔEt thus providing an extremely sensitive probe of energy changes in CTLs. This work collects and reviews data on glow peaks due to electron or hole release from lanthanide dopants in 36 different inorganic compounds. To compare results from different literature sources, data were always re-analysed using the same method that is solely based on the temperature at the maximum of the glow peak. The changes in ΔEt along the lanthanides series provides insight at the sub 0.1 eV level on the changes in CTL energies. We will use a compound-dependent parameter to account for the nephelauxetic effect and a compound dependent parameter to account for lattice relaxation around the lanthanide. Together with information from lanthanide luminescence spectroscopy, the vacuum referred binding energy (VRBE) diagram will be constructed for each compound. The lanthanide electron or hole trap depth read from the VRBE scheme will be compared with that derived from the TL glow peak. Surprisingly good agreement will be demonstrated.

Driven by the pursuit of optimizing the luminescent properties of garnet-based single crystals for X-ray imaging applications, this work reports on the successful synthesis and in-depth characterization of GYAGG crystals doped with Ce³⁺ or Tb³⁺ ions, and doubly-doped with both of them. Micro-pulling down synthesis yielded crystals with a single cubic phase confirmed by X-ray diffraction. Photoluminescence (PL) and radioluminescence (RL) measurements on Ce³⁺,Tb³⁺ co-doped GYAGG revealed bidirectional energy transfer processes. Characteristic broadband 5d 1 →4f emission of Ce³⁺ centers peaking at 530 nm and narrow 4f→4f emission lines of Tb³⁺ ions starting from 5D 4 level within 480–630 nm were observed. At higher doping levels, cross-relaxation in Tb³⁺ pairs resulted depleted 5D 3 state and only the emission from 5D 4 one was observed in the spectra. Analysis of PL decay characteristics corroborated the spectral observations, confirming progressively decreasing Ce³⁺ decay time (down to 40 ns at 15 % Tb3+) due to enhanced Ce³⁺→Tb³⁺ energy transfer. Similarly, the Tb³⁺ decay time accelerated by more than 60 % after the Ce³⁺ co-doping. Notably, co-doping with 0.5 % Ce³⁺ and 10–15 % Tb³⁺ doubled the luminescence intensity of RL spectra compared to 0.5 % Ce³⁺-doping alone, attributed to the increased density of emitting centers. • High-quality and crack-free GYAGG:Ce,Tb single crystals were successfully grown. • The photoluminescence spectra revealed Ce³⁺↔Tb³⁺ bidirectional energy transfer. • At lower Tb³⁺ doping (0.5 %), the bidirectional energy transfer was inefficient. • High Tb³⁺ doping (15 %) significantly enhanced energy transfer. • Co-doping yielded a two-fold radioluminescence intensity compared to sole doping. [ABSTRACT FROM AUTHOR]

In this study, we examine the impact of optical and scintillation properties on needle-shaped bis(butylammonium) lead bromide [(BA) 2 PbBr 4 ] crystals (average length of 12.7 mm and average width of 1.3 mm), considering different growth methods and dimensions. Needle-shaped crystals with a length-to-width aspect ratio greater than 10 are essential for cutting-edge radiation imaging technology. Through X-ray diffraction characterization, we observe lattice expansion in the needle-shaped crystals compared to previous single crystals. This expansion leads to a stronger overlap between absorption and photoluminescence (PL) spectra, resulting in a smaller Stokes shift of 26 meV. Time-resolved PL analysis reveals a fast decay component of 0.8 ns, which is 68 % faster than the previously reported best value of 2.0 ns, with an average decay time of 3.6 ns, 48 % faster than the best reported value of 7.0 ns. Although our measured sample exhibits a comparatively low light yield (LY) of 7.8 ph/keV due to strong self-absorption, the best energy resolution is observed with a value of 11.5 %, similar to the best reported value of 10.9 %. Despite this, the LY is notably superior to that of previously reported benzylammonium lead bromide [(BZA) 2 PbBr 4 ] crystals (3.7 ph/keV). Additionally, scintillation decay shows a fast component of 9.4 ns and an average decay time of 119 ns. These characteristics make two-dimensional-(BA) 2 PbBr 4 needle-shaped crystals promising candidates for cost-effective and scalable applications in radiation imaging technology. • Solution process 2D-(BA) 2 PbBr 4 needle-shaped crystals was successfully synthesized with an aspect ratio of length to width exceeding 10. • Time-resolved photoluminescence analysis reveals ultra-fast decay component of 0.8 ns, which is 68 % faster than the reported value of 2.0 ns. • Solution grown needle-shaped 2D perovskites are an interesting and versatile class of materials for cost-effective and scalable in cutting-edge radiation imaging technology. [ABSTRACT FROM AUTHOR]

Tb3+ doped sodium-gadolinium-aluminum-phosphate glass samples (PGNA) with chemical compositions 30Na 2 CO 3 :8Gd 2 O 3 :5Al 2 O 3: (57- x)P 2 O 5 : x Tb 4 O 7 (where x = 0 , 0.25, 0.5, 1.0, 2.0, 3.0, 4.0, and 5 mol. %) were manufactured by using adopting the conventional melt quenching technique. The PXRD study of the prepared samples was used to confirm the amorphous structure. FE-SEM, EDS, and FTIR studies were carried out to analyze the elemental and structural characteristics of synthesized glasses. The X-ray induced luminescence spectra were obtained at room temperature and the emission peak at 311 nm corresponding to Gd3+ transition was observed decreasing with the increase of Tb 4 O 7 concentrations, while emission peak intensities corresponding to Tb3+ electronic transitions increased with the concentrations of Tb 4 O 7. The results from the photoluminescence (PL) studies in the UV–Vis–NIR region showed the glasses emitting intense green light with the highest peak at 544 nm under excitations at 220, 272, and 311 nm. The PL emission intensities were found reasonably high under characteristic excitations of both Gd3+ and Tb3+, peaking at 380, 414, 437, 489, 544, 584, and 623 nm, which corresponding to 5D 3 → 7F 6, 5D 3 → 7F 5 , 5D 3 → 7F 4 , 5D 4 → 7F 6 , 5D 4 → 7F 5 , 5D 4 → 7F 5 , 5D 4 → 7F 4 , 5D 4 → 7F 3 transitions, respectively. The decay time of Tb3+ ions has been observed to decrease when the concentration of Tb 4 O 7 increases. The energy transfer from Gd3+ to Tb3+ was found increased with increasing of Tb3+ concentrations. The CIE 1931 chromaticity coordinates of Tb doped PGNA glasses were found to be in the green range, indicating a strong potential for green laser application. The results from X-ray imaging showed that Tb-doped glass scintillators promise of efficient and low-cost solution for X-ray imaging applications. • XRL spectra has the emission peak at 311 nm corresponding to 6P 7/2 → 8S 7/2 due to Gd3+ ion in the host. • Glasses emitting intense green light with highest peak at 544 nm under 220, 272, 311 nm excitations. • PL emission intensities found reasonably high for both Gd3+ and Tb3+ characteristic excitation. • CIE 1931 coordinates of glasses found in the green indentify potential for green laser application. • The Tb-doped glass promise of efficient and low-cost solution for X-ray imaging applications. [ABSTRACT FROM AUTHOR]

Gd 2 O 2 S:Pr,Ce nanophosphors have been prepared by liquid-phase method using NH 2 SO 3 H as the sulfur source for the first time. The formula of the novel precursor was determined as Gd 2 (OH) x (NH 2 SO 3) 6-x ∙nH 2 O by EDS, TG-DSC and FT-IR spectroscopy, and the precursor exhibited an amorphous structure and lamellar morphology as deduced from XRD and SEM. The optimum pH was 8 and the optimum calcination temperature was 1000 °C for the preparation of Gd 2 O 2 S:Pr,Ce from the precursor. The PL quantum yield and the fluorescence lifetime of Gd 2 O 2 S:Pr,Ce powder was 53.62 % and 2.48 μs respectively, which will allow the preparation of ceramic scintillators with high optical output and energy resolution. Compared to the traditional sulfur sources such as sublimed sulfur, and H 2 SO 4 , NH 2 SO 3 H is harmless and avoids pollution gases during the preparation of Gd 2 O 2 S:Pr,Ce nanophosphors. It also eliminates the need to add additional reagents, simplifying the preparation steps and reducing production costs. • GOS powder was synthesized by using a new sulfur source NH 2 SO 3 H for the first time. • The novel precursor Gd 2 (OH) x (NH 2 SO 3) 6-x ∙nH 2 O was analyzed in detail. • GOS powder was with high PL quantum yield and short fluorescence lifetime. [ABSTRACT FROM AUTHOR]

Sm-doped CaCl 2 , SrCl 2 , and BaCl 2 bulk crystals were synthesized using the conventional vertical Bridgman method, and the photoluminescence, radioluminescence, and detector properties were evaluated. The Sm-doped CaCl 2 , SrCl 2 , and BaCl 2 samples show a broad emission band at 750, 690, and 650 nm, respectively, which is attributable to the 5d-4f transitions of Sm2+. The pulse height spectra under 137Cs γ-rays (662 keV) show that the Sm-doped CaCl 2 and SrCl 2 exhibit 9300 and 33000 photons/MeV, respectively. These samples can be used for γ-ray measurements in the red to NIR region. • Sm-doped CaCl 2 , SrCl 2 , and BaCl 2 crystals were synthesized using the conventional vertical Bridgman method. • The photoluminescence, radioluminescence, and detector properties were evaluated. • The samples show a broad emission band at 600–800 nm due to Sm2+. • Sm-doped CaCl 2 , SrCl 2 , and BaCl 2 exhibit light yield of 9300, 33000, and 16000 photons/MeV, respectively. [ABSTRACT FROM AUTHOR]

In order to estimate the stability of the light output of the scintillation detector, the Lu 2 SiO 5 :Ce scintillation crystals, additionally doped with Ca2+ ions at concentrations of 0 ÷ 0.4 at%, were studied. The spectra of optical absorption, gamma-luminescence, thermal luminescence, dose and temperature dependences of luminescence were measured. Gamma-luminescence in the dose range 10 - 5·107 Gy was recorded using 60Co gamma-source at the temperature range of 310–460 K. In contrast to the initial sample (non-doped with Ca), in the sample doped with 0.1 at% of Ca, an increase in the luminescence intensity was observed in the range of 390–425 nm, but further with an increase in the concentration of Ca (0.3–0.4 at%), the intensity of this band decreased to the initial level (undoped). At Ca concentrations of 0.3 and 0.4 at%, the intensity of the Ce1 center band remains practically unchanged up to a dose of 5·107 Gy. LSO crystals doped with Ce 0.1 at% and co-doped with Ca 0.1 at% can be recommended as a scintillation detector up to a gamma-dose of 105 Gy at room temperature. • Ca-codoped Lu 2 SiO 5 :Ce crystals are studied as a material for scintillation detector. • At Ca 0.1 at% an increase in the luminescence at 390–425 nm was observed. • At Ca 0.3 at% the Ce1 center emission doesn't change up to a γ-dose of 5·107 Gy. • Defect complexes completely discolor at room temperature in two days. [ABSTRACT FROM AUTHOR]

Single crystals of Gd 3 (Ga,Al) 5 O 12 :Ce,Mg with different concentration of Mg2+ ions varying from 0 to 0.029 at.% are investigated by the X-ray diffraction, steady-state and time-resolved photoluminescence, and thermally stimulated luminescence (TSL) methods in a wide temperature range (77–510 K). The origin and structure of the luminescence centers are considered. The influence of Mg2+ ions on the structure of the Ce3+-related excited state, the processes taking place in this state, and the TSL characteristics is clarified. At low temperatures, the photoluminescence optical quenching in close {Ce3+ - Mg2+} pairs is found to be responsible for the light yield reduction accompanied with the acceleration of the luminescence decay kinetics. At room temperature, the luminescence quenching can be additionally caused by the thermal ionization of the 5d 1 excited state of Ce3+ ion, whose probability increases with the increasing Ga content. The conclusion is made that in order to create the fast scintillator with the maximum light yield, the concentration of intrinsic crystal lattice defects in Gd 3 (Ga,Al) 5 O 12 :Ce,Mg should be minimized, the optimum composition of the host should be chosen, and the balance between the concentrations of the doped Mg2+ and Ce3+ ions should be optimised. • Photo- and thermoluminescence and XRD of Gd 3 (Ga,Al) 5 O 12 :Ce,Mg crystals are studied. • Influence of Mg2+ ions on the Ce3+-related luminescence and excited states is clarified. • Optical quenching in close {Ce3+ - Mg2+} pairs results in the light yield reduction and accompanied with acceleration of the Ce3+ luminescence decay kinetics. • Ga3+ ions and intrinsic defects strongly influence the luminescence thermal quenching. • Optimum host composition and preferable Ce3+/Mg2+ concentration ratio are considered. [ABSTRACT FROM AUTHOR]

Strontium phosphate (SrO–P 2 O 5 –Al 2 O 3 –Gd 2 O 3) glasses with 0.05, 0.1, 0.5, and 1 mol % CeO 2 were prepared by the conventional melt quenching technique. These glasses' luminescence, scintillation, and physical properties were measured and discussed in detail. The density, refractive index, and oxygen packing density of the studied glasses were increased with an increase in CeO 2 concentration. At lower concentrations of CeO 2 , the characteristic 310 nm emission from Gd3+ and broadband emission from Ce3+ ions were obtained under X-ray excitations. The intensity of both Gd3+ and Ce3+ emission bands under 270 nm Gd3+ excitations reduced with further increase in CeO 2 , showing the delayed energy transfer from Gd3+ to Ce3+ ions. The integrated X-ray-induced luminescence intensity of 0.5% CeO 2 glass was found to be 21% that of reference BGO crystal. For the lower concentration of CeO 2 , a slow decay time along with the fast Ce3+ decay was observed and disappears for higher CeO 2 concentrations. The fast luminescence decay in the range of 22 ns–30 ns was observed for all the PSAG:Ce glasses, which was attributed to the lifetime of the 4f-5d transition of the Ce3+ ions. The faster decay time and reasonable scintillation light suggest the application of these glasses for radiation detector applications. • Strontium phosphate glasses with various concentrations of CeO 2 are fabricated. • The density, refractive index, and OPD increased with CeO 2 concentrations. • Efficient energy transfer from Gd3+ to Ce3+ was confirmed from luminescence. • X-ray-induced scintillation light was found to be 21% that of BGO crystal. [ABSTRACT FROM AUTHOR]

LaMgAl 11 O 19 :Er single crystals were examined as candidates for scintillators emitting near-infrared luminescence, and their radioluminescence and scintillation detector characteristics were assessed. Upon exposure to X-ray, distinct emission peaks appear at ∼550 and ∼1540 nm and are attributable to Er3+ ions. The decay curves also exhibited characteristic decay times associated with Er3+ ions. Particularly, the 3% Er-doped sample showed a discernible linearity in the dynamic range of dose rate from 1 to 50,000 mGy/h, indicating the potential utility in applications requiring precise and reliable radiation measurements. • Er-doped LaMgAl 11 O 19 crystals were synthesized by the floating zone method. • The samples show a broad emission band at 380 nm due to host and sharp peaks at 550 and 1540 nm due to Er3+. • The 3% Er-doped sample showed a good linearity in the dynamic range of dose rate from 1 to 50,000 mGy/h. [ABSTRACT FROM AUTHOR]

Rare-earth aluminate garnet-type double oxides have practical applications as scintillators with high luminescence yields; however, several garnet compounds are metastable phases, and those scintillation properties are yet unclear. We prepared Ce3+-doped Gd 3 Al 5 O 12 (Ce3+:GAG) as a thick-film phosphor, using laser-assisted metal–organic chemical vapor deposition, and investigated its luminescence and scintillation properties. With a deposition rate of 48 μm h−1, the Ce3+:GAG thick film was epitaxially grown on a Y 3 Al 5 O 12 single crystal substrate with in-plane orientation relationship. Under UV light and α-ray irradiations, the Ce3+:GAG film exhibited a broad emission centered at 560 nm corresponding to the 5d–4f transition of Ce3+ ions. The scintillation light yield of the Ce3+:GAG film was 14250 photons per 5.5 MeV with a fast decay constant of 82.8 ns for the α-ray irradiation from the 241Am source. • Ce3+:GAG thick film phosphor was epitaxially grown using CVD method. • Ce3+: GAG exhibited photoluminescence at 560 nm due to Ce3+ 5d-4f transition. • Scintillation light yield was 14250 photons per 5.5 MeV, comparable to Ce3+:YAG. [ABSTRACT FROM AUTHOR]

Lead halide perovskites are reportedly a very promising group of materials for scintillation due to their fast sub-nanosecond exciton luminescence, small band-gaps, and high theoretical light yield. Unfortunately, they only show emission at cryogenic temperatures. In this work single crystals of CsPbBr 3 and CsPbCl 3 are studied at cryogenic temperatures. Upon comparing the 10 K emission spectra measured under X-ray and UV–vis excitation, a new near-infrared emission was found for both CsPbBr 3 and CsPbCl 3 only present under X-ray excitation. The integral light yields of CsPbBr 3 and CsPbCl 3 at 10 K are estimated to be 34,000 and 2,200 photons/MeV under 40 keV X-ray excitation, respectively. The main components of the light yield of CsPbBr 3 at 10 K are the near band-gap free exciton emission that suffers from self-absorption and the broad near-infrared emission that falls outside the typical detection range of a photo-multiplier tube. Due to the combination of the two aforementioned effects it was not possible to measure a γ -ray pulse height spectrum for CsPbBr 3 at 10 K. Despite all the suitable properties, like the fast decay, a small band-gap, and the positive prospects of 3D perovskite based scintillators, we conclude that these materials perform poorly as scintillation crystals. [ABSTRACT FROM AUTHOR]

0.5, 1, 2, and 5% Er-doped La 3 Ga 5 SiO 14 (LGS) single crystals were synthesized by the Floating Zone method and the photoluminescence (PL) and scintillation properties were characterized. Emission peaks appeared at visible–near-infrared (NIR) regions. Their spectral features matched with those due to the 4f–4f transitions of Er3+. The PL quantum yields of 0.5, 1, 2, and 5% Er-doped samples were respectively 45.0, 73.3, 82.5, and 69.4%. The decay times due to the 2H 9/2 –4I 15/2 transitions of Er3+ were obtained when visible ranges were monitored under excitation of both visible lights and X-rays. All the prepared samples showed good linearity between the X-ray exposure dose rate and scintillation signals in NIR ranges. The best lower detection limit in prepared samples was 5 mGy/h recorded by the 2% Er-doped LGS. • Er-doped La 3 Ga 5 SiO 14 single crystals were synthesized by the Floating zone method. • Luminescence due to 4f–4f transitions of Er3+ was observed in both visible and near-infrared regions. • Quantum yields of 0.5, 1, 2, and 5% Er-doped samples were respectively 45.0, 73.7, 82.5, and 69.4%. • The best lower detection limit in prepared samples was 5 mGy/h obtained by 2% Er-doped sample. [ABSTRACT FROM AUTHOR]

Ce differently (0, 0.01, 0.1, 1, 2 and 5% with respect to Mg) doped LiMgAlF 6 ceramics were synthesized by the spark plasma sintering (SPS) method. In photoluminescence (PL), emission bands appeared at 300 nm with 30 ns day time, and these emission properties were almost the same in scintillation under X-ray irradiation. Further, thermally stimulated luminescence (TSL) was observed after X-ray irradiation, and the primary glow peak temperature was 160 °C with a lower detection limit of ∼10 mGy. • Ce-doped LiMgAlF 6 ceramics were prepared by the spark plasma sintering method. • Photoluminesence and scintillation properties were investigated. • Thermally stimulated luminescence properties were evaluated. [ABSTRACT FROM AUTHOR]

The photoluminescence and scintillation properties of n-bromophenethylammonium lead chloride ((n-BrPEA) 2 PbCl 4) (n = 4, 3, and 2) and phenethylammonium lead chloride ((PEA) 2 PbCl 4) have been investigated. All the samples showed broad emission peaks at 400–700 nm upon excitation by UV light or X-ray. The decay time constants of 8–28 ns were obtained which originated from the recombination of self-trapped exciton (STE) within inorganic layers. The afterglow levels at 20 ms after 2 ms of X-ray irradiation of (4-BrPEA) 2 PbCl 4 and (3-BrPEA) 2 PbCl 4 (76 and 55 ppm) were better than (PEA) 2 PbCl 4 (379 ppm). The light yield of (4-BrPEA) 2 PbCl 4 (3100 photons/5.5 MeV-α) was higher than (PEA) 2 PbCl 4 (1400 photons/5.5 MeV-α). • (BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystals were grown by the slow cooling method. • All the crystals showed the luminescence due to the recombination of the self-trapped excitons confined in inorganic layers. • The (4-BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystal showed the highest QY in the present crystals. • The light yields of the (4-BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystals surpassed that of the unsubstituted crystal. [ABSTRACT FROM AUTHOR]

Intrinsic luminescence in Ce-doped (Lu,Y) 2 SiO 5 (or LYSO:Ce) single crystals have been studied by means of excitation luminescence spectroscopy in the vacuum ultraviolet energy range under synchrotron radiation. A previously unreported luminescence band with emission at 250 nm has been discovered as well as its thermal behavior was described in the temperature range 10–120 K. The excitation spectra as well as time-resolved properties of this band suggest that this emission corresponds either to the singlet component of self-trapped exciton or to a self-trapped exciton in the lutetium sublattice of LYSO single crystals. • New previously unreported intrinsic emission band at 250 nm has been observed in LYSO single crystals. • Temperature dependencies of intrinsic luminescence have been measured and analyzed. • Two possible origins of new 250 nm emission are proposed and discussed. [ABSTRACT FROM AUTHOR]

Ce,Mg:Lu 2 YGa x Al 5-x O 12 (x = 1.5, 2, 2.5, 3) ceramic scintillators were fabricated by oxygen sintering combined with air annealing using nano-powders synthesized by the co-precipitation method. The Ce3+ 5d 1 → 4f (2F 5/2 , 2F 7/2) luminescence band was blue shifted with increasing Ga content due to the decrease in the crystal field splitting of the 5d levels. At room temperature (RT), the decrease of photoluminescence decay time and scintillation decay time was observed with increasing Ga content. At 662 keV γ-rays, the sample Ga2 exhibited high light yield (LY) of 28,700 photons/MeV, fast scintillation decay times of 17.7 ns (17 %) + 45.7 ns (83 %), and good time resolution of ∼220 ps. At RT, the decrease of LY value for the samples Ga2.5 and Ga3 could be attributed to the larger thermal ionization of the excited Ce3+ centers. • Scintillation properties of Ce,Mg:Lu 2 YGa x Al 5-x O 12 (x = 1.5, 2, 2.5, 3) ceramics are investigated. • All ceramic samples show fast effective scintillation decay time less than 47 ns. • Sample x = 2 shows high LY of ∼28,700 ph/MeV @662 keV γ rays. • Samples x = 2 and 2.5 show good coincidence time resolution of 220 ps. [ABSTRACT FROM AUTHOR]

This study provided the first in-depth investigation of the effects of large dopant incompatibility (Pr3+ and La3+ ions) on the small host lattice element (Lu3+) in Lu 3 Al 5 O 12 (LuAG) single crystal. The growth of such complex crystals from the melt presented many challenges. By engineering the ionic radius ratio of RE- and M-site cations, a single-crystal phase stabilized by configurational entropy was achieved. This investigation elucidated the crystallization behavior of configurationally disordered rare-earth aluminum garnet oxide (Lu 1−x−y Pr x La y) 3 Al 5 O 12 from the melt and characterized its functional properties, including microstructural, optical, photoluminescence, and scintillation properties, between 5 and 300 K. Relaxation of the imposed strain energy led to local perturbations and destabilization of the garnet structure. Multielemental EDS mapping, micro-Raman spectroscopy, and thermoluminescence revealed the mechanism by which atomic size mismatch drove a smooth transition from the garnet to the perovskite phase in high entropy garnets. The optical, photoluminescence, and scintillation measurements provided fundamental insights into property changes driven by incompatibility doping. Standard and modified Judd-Ofelt theory analysis of absorption spectra determined the phenomenological Judd-Ofelt parameters Ω λ and radiative lifetimes. Atomic size mismatch engineering offers a promising approach to overcoming the limitations of conventional eutectic synthesis methods. • Perovskite inclusions, driven by atomic size mismatch, extend from rim to core. • Controlled incompatible La3+,Pr3+ codoping in LuAG modify functional properties. • Scintillation light yield improved up to 30% in La3+ codoped LuAG:Pr crystals. • (La,Pr)AlO 3 perovskite forms due to size mismatch of La3+ and Pr3+ with Lu3+. • Lattice disorder affects the intensity ratio of Pr³⁺ 5d→4 f and 4 f→4 f emissions. [ABSTRACT FROM AUTHOR]

Scintillators are of significance for X-ray excited luminescence (XEL) imaging from scientific research to medical diagnostics application. Rare earth fluoride nanocrystals possess distinctive luminescent properties originated from the abundant energy level of lanthanide activators, showing potential applications as next-generation scintillators. Herein, high Z atomic rare earth element lutetium was chosen to synthesized NaLuF 4 -based nanoscintillators by Tb doping. Core-shell structure was fabricated to further enhance the XEL emission intensity. The NaLuF 4 -based nanoscintillators was demonstrated more efficient XEL emission with 3-folds increase compared to NaYF 4 nanocrystals. NaLuF 4 nanocrystals with a 25 mol% Tb doping and an inert shell coating exhibited excellent scintillation performance with detection limit as low as to 57.05 nGy air s−1. X-ray imaging demonstrated a high spatial resolution of 10.5 lp mm−1 using a scintillator film made from as-prepared NaLuF 4 -based nanoscintillators. Finally, such NaLuF 4 -based scintillators film have been applied in X-ray imaging application for a chip and a biological specimen. This study proposed an effective strategy to enhance XEL for rare earth fluoride, providing the ability for high-quality X-ray imaging. • Enhanced luminescence of X-ray excitation nanocrystals were demonstrated by selecting NaLuF 4 -based and core-shell structure. • The nanoscintillators exhibited excellent X-ray scintillation performance, achieving efficient X-ray luminescence imaging. [ABSTRACT FROM AUTHOR]

X-ray Excited Optical Luminescence (XEOL) from rare earth doped whitlockite phosphates and silicate garnets [Ca 9 La(PO 4) 7 and Ca 9 Lu(PO 4) 7 , doped with 1 mol% Ce3+; Ca 3 Sc 2 Si 3 O 12, doped with 0.5 mol% Pr3+, 1 mol% Eu3+ and 1 mol% Tb3+], was obtained upon X-ray excitation with a tunable synchrotron light source. Excitation at photon energies across the M 5,4 -edge of the dopants reveals additional information not normally obtainable with conventional UV/visible or an X-ray line source (Al K α). It is found that despite the low concentration, photoluminescence yields excited with photon energy at the M 5,4 -edge of the rare-earth dopant can positively and negatively affect the overall energy transfer to the optical center. The implication of these observations is discussed. The application of XEOL in the investigation of X-ray scintillators is illustrated. [Display omitted] • X-ray Excited Optical Luminescence (XEOL) from rare earth doped phosphates and silicates is investigated. • Excitation at the M5,4-edge of the dopants reveals additional information not obtainable with UV/visible light. • Excitation at the M5,4-edge can positively and negatively affect the overall energy transfer to the optical channel. • The application of XEOL in the investigation of X-ray scintillators is illustrated. [ABSTRACT FROM AUTHOR]

• CuI thin films have been synthesized in iodine solution at room temperature. • An apparent NBE peak can be recognized both in PL and XEL spectra. • Iodine-rich condition is beneficial to improve the XEL yield of CuI thin films. CuI is considered as a potential candidate for fast scintillator material due to the fast decay time. However, the ever-reported CuI scintillator usually demonstrates a more intensive deep-level emission with the decay time as long as 2.82 μs, which is unfavorable for the application as a fast scintillator material. In present work, γ-phase CuI were synthesized by iodizing Cu thin films in iodine solution at room temperature. An apparent near band-edge emission (NBE) is observed both in photoluminescence and X-ray excited luminescence spectra. By analyzing the variation of the relative intensity ratio of the sub-peaks composing NBE against different fabrication conditions, it can be deduced that Cu vacancy and surface chemisorbed iodine are responsible for the above luminescence behavior. It is hoped that these findings may boost the exploration of CuI thin films as fast scintillator materials. [ABSTRACT FROM AUTHOR]

(n-ClC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 ((n-ClPEA) 2 PbCl 4) (n = 2, 3, and 4) and (n-C 6 H 5 C 2 H 4 NH 3) 2 PbCl 4 ((PEA) 2 PbCl 4) crystals were synthesized by the slow-cooling method, and the photoluminescence (PL) and scintillation properties were evaluated. All the samples showed self-trapped excitons luminescence at 400–700 nm. The PL quantum yields of the (n-ClPEA) 2 PbCl 4 (n = 2, 3, and 4) and (PEA) 2 PbCl 4 crystals were 2.2, 0.9, 11.2, and 2.2 %, respectively. In the pulse-height spectra of 241Am α-rays (5.5 MeV), full energy absorption peaks were observed, and the light yields of (n-ClPEA) 2 PbCl 4 (n = 2, 3, and 4) and (PEA) 2 PbCl 4 crystals were respectively calculated to be 530, 490, 2,800, and 1,400 photons/5.5 MeV-α with typical errors of ± 10 %. [ABSTRACT FROM AUTHOR]

• (Gd 1-x Ce x) 3 (Ga 0.995 Cr 0.005) 5 O 12 single crystals were grown by micro-pulling down method. • The emission wavelengths of these crystals were approximately 730 nm. • Cr was segregated in the center part of the crystals. • The relationship between Cr segregation and emission intensity was investigated. • The correlation coefficients of thoes relationships were around 0.9. For the decommissioning of Fukushima Daiichi Nuclear Plants, a novel real-time dose-rate monitor consisting of a scintillator, 100-m long optical fiber and CCD spectrometer has been proposed, and this scintillation material is required to have an emission wavelength of longer than approximately 650 nm. In this paper, as a candidate material for the system, we focused on Ce/Cr co-doped Gd 3 Ga 5 O 12 (Ce/Cr:GGG) single crystals grown by the micro-pulling down method. Since the light output of this material was expected to depend on the Cr3+ concentration, we investigated the relationship between Cr segregation and luminescence properties in Ce/Cr:GGG crystal. Generally, a single photon counting method is not available to evaluate its light output accurately due to the long decay time, we used a novel technique "emission-intensity two-dimensional- mapping method" (2D-image method) to verify the light intensity at each point of the sample. This method realized estimation of the light intensity within the sample, though segregation of Cr3+ is observed. The results showed that Cr was concentrated in the center part along the radial direction in the grown crystals, while all parts had an emission wavelength of approximately 730 nm excited by X-ray. Using the 2D-image method, emission intensity was found to correspond to the Cr concentration, and its correlation coefficients between emission intensity and Cr concentration were over 0.8. We found that our material is available for the monitoring system when the Cr dense part of the crystal is cut and used. [ABSTRACT FROM AUTHOR]