Search

Language interference is one of the most common problems in foreign language teaching. Language learners inevitably apply knowledge of their native language to a second language, which leads to linguistic interference. The more differences there are between the two languages, the more prominent the interference between them will be. This paper examines the key issues faced by Russian students learning English and English-speaking students learning Russian and suggests key areas of teaching needed in both disciplines.

High-frequency (HF) oil-immersed transformers with small size and light weight have been paid wide attention by researchers. Its oil–paper insulation frequently withstands HF over-voltages at frequencies of several kilohertz and above, resulting in the too early failure of oil–paper insulation. In order to investigate the effect of HF on oil–paper insulation, this article investigates the partial discharge (PD) characteristics of oil–paper insulation under HF stress. The experimental results show that a frequency-induced inflection point is existed near 10 kHz and the PD parameters of HF voltages is much higher than that ac voltages. Besides, the theoretical mechanism is expounded to interpret and understand the formation process of frequency-induced inflection points more easily. It can be found that the change in frequency causes the change in the charge decay time constant and the residual charge on the insulating surface, resulting in the formation of the frequency-induced inflection point at HF. These results might contribute to determine the characteristics of PDs between HF voltages and ac voltages. It can provide references for the research and production of HF transformers. [ABSTRACT FROM AUTHOR]

Paper-based digital microfluidic biochips (P-DMFBs) have recently emerged as a promising low-cost and fast-responsive platform for biochemical assays. In P-DMFBs, electrodes and control lines are printed on a piece of photograph paper using an inkjet printer and carbon nanotubes (CNTs) conductive ink. Compared with traditional digital microfluidic biochips (DMFBs), P-DMFBs enjoy significant advantages, such as faster in-place fabrication with printer and ink, lower costs, and better disposability. Since electrodes and CNT control lines are printed on the same side of this paper, a critical design challenge for P-DMFB is to prevent control interference between moving droplets and the voltages on CNT control lines. Control interference may result in unexpected droplet movements and thus incorrect assay outputs. To address this design challenge, a control-fluidic codesign methodology is proposed in this paper, along with two demonstrative design flows integrating both fluidic design and control design, i.e., the droplet-oriented codesign flow and the electrode-oriented codesign flow. The droplet-oriented flow is suitable for designing biochips with sparse electrodes and relatively larger number of droplets, whereas the electrode-oriented flow is suitable for biochips with dense electrodes and smaller number of droplets. The computational simulation results of real-life bioassays demonstrate the effectiveness of the proposed codesign flows. [ABSTRACT FROM AUTHOR]

A multi responsive Schiff base sensor L with thiophenol moiety was synthesized by the single-step condensation method. The structural analysis of the sensor was proposed by 1H-NMR, UV- Visible absorption, HRMS and FT-IR spectroscopy. Sensor L exhibited an instant appearance of yellow color on the addition of copper ions. Since copper gave an intense color change, therefore detailed studies were performed for copper sensing w.r.t. designed sensor L. Selectivity and sensitivity of sensor concerning copper metal ions were established by performing various UV-Visible spectroscopic and colorimetric studies. The 1:1 binding framework of the L-Cu2+ complex is confirmed by Job’s Plot and further supported by DFT studies. With the help of Benesi-Hildebrand equation, the detection limit and the association constants were found to be $3.15 \times 10^{-6}$ M and $1.16 \times 10^{4}$ M−1, respectively. In addition, sensor L was transferred onto solid substrates including silica and paper strips for establishing its utility in the onsite detection of copper ions. [ABSTRACT FROM AUTHOR]

This paper studies the secure transmission in a multiuser broadcast channel where only the statistical channel state information of the eavesdropper is available. We propose to apply secret dirty-paper coding (S-DPC) in this scenario to support the secure transmission of one user and the normal (unclassified) transmission of the other users. By adopting the S-DPC and encoding the secret message in the first place, all the information-bearing signals of the normal transmission are treated as noise by potential eavesdroppers and thus provide secrecy for the secure transmission. In this way, the proposed approach exploits the intrinsic secrecy of multiuser broadcasting and can serve as an energy-efficient alternative to the traditional artificial noise (AN) scheme. To evaluate the secrecy performance of this approach and compare it with the AN scheme, we propose two S-DPC-based secure transmission schemes for maximizing the secrecy rate under constraints on the secrecy outage probability (SOP) and the normal transmission rates. The first scheme directly optimizes the covariance matrices of the transmit signals, and a novel approximation of the intractable SOP constraint is derived to facilitate the optimization. The second scheme combines zero-forcing dirty-paper coding and AN, and the optimization involves only power allocation. We establish efficient numerical algorithms to solve the optimization problems for both schemes. Theoretical and simulation results confirm that, in addition to supporting the normal transmission, the achievable secrecy rates of the proposed schemes can be close to that of the traditional AN scheme, which supports only the secure transmission of one user. [ABSTRACT FROM PUBLISHER]

In this paper, we present a practical method to construct dirty paper coding (DPC) schemes using sum codes. Unlike the commonly used approach to DPC where the coding scheme involves concatenation of a channel code and a quantization code, the proposed method embodies a unified approach that emulates the binning method used in the proof of the DPC result. Auxiliary bits are used to create the desired number of code vectors in each bin. Sum codes are obtained when information sequences augmented with auxiliary bits are encoded using linear block codes. Sum-code-based DPC schemes can be implemented using any linear block code, and entail a relatively small increase in decoder complexity when compared to standard communication schemes. They can also lead to significant reduction in transmit power in comparison to standard schemes. [ABSTRACT FROM AUTHOR]

Recently, there has been a lot of success in using the deterministic approach to provide approximate characterization of Gaussian network capacity. In this paper, we take a deterministic view and revisit the problem of wiretap channel with side information. A precise characterization of the secrecy capacity is obtained for a linear deterministic model, which naturally suggests a coding scheme which we show to achieve the secrecy capacity of the degraded Gaussian model (dubbed as “secret writing on dirty paper”) to within half a bit. [ABSTRACT FROM PUBLISHER]

Biological compounds like Dopamine (D), Xanthine (X), Ascorbic acid (AA) and Uric acid (UA) play a vital role in food, clinical and human metabolism. Since these compounds are present in biological fluids and have close standard potentials values, it is imperative to choose a method to sense these fluids without any electrochemical interference. Toray paper, with a porous gas diffusion layer imbibed with denser carbon fibers, is an excellent option that can be utilized as a working electrode for such sensing applications. Herein, the electroactivity of these compounds was tested using cyclic voltammetry and square wave voltammetry without any interference. The linear ranges for the compounds (D, X, AA, UA) are 10- $1000~\mu \text{M}$ , 7- $300~\mu \text{M}$ , 100- $1000~\mu \text{M}$ and 30- $1000~\mu \text{M}$ respectively, while the limits of detection are $9.67~\mu \text{M}$ , $6.54~\mu \text{M}$ , $97.12~\mu \text{M}$ and $28.74~\mu \text{M}$ respectively with S/N ratio of 1.5. Finally, the electrode was tested with human serum samples for the identification of D, X, AA and UA manifesting exceptional reproducibility. [ABSTRACT FROM AUTHOR]

Dirty paper coding is an interference pre-cancellation method for known interference at the transmitter and serves as a basic building block in the digital watermarking system. In this letter, we investigate the dirty paper model in the simplest digital communication system, where both the codeword and the interference are binary. For watermark embedment, we derive the relevant coding, the constant coding, and the symmetric relevant coding when the encoder focuses on the binary codeword and interference. The channel capacity is analyzed and the optimal parameter is discussed in the case. [ABSTRACT FROM AUTHOR]

New power allocation schemes taking both sum-rate and fairness into account for MIMO downlink communications employing successive zero-forcing dirty paper coding are presented in this letter. Specifically, using a revised l1-norm fairness measure that allows for a more comprehensive consideration when users have an unequal number of receive antennas, the optimal tradeoff between sum-rate and fairness for MIMO downlink communications with arbitrary channel statistics is completely characterized. A novel stochastic power allocation scheme capable of achieving this optimal tradeoff is also given. To put the optimal tradeoff into practical use, an explicit rule for selecting operating sum-rate from the tradeoff is then proposed. Simulation results show that the new scheme can yield higher sum-rate and better fairness at the same time. [ABSTRACT FROM AUTHOR]

We derive the capacity region of the two-user dirty-paper Gaussian multiaccess channel (MAC) with conferencing encoders. In this MAC, prior to each transmission block, the transmitters can hold a conference in which they can communicate with each other over error-free bit pipes of given capacities. The received signal suffers not only from additive Gaussian noise but also from additive interference, which is known noncausally to the transmitters but not to the receiver. The additive interference is modeled as Gaussian or uniform over a sphere. We show that the interference can be perfectly mitigated, i.e., that the capacity region without interference can also be achieved in its presence. This holds irrespective of whether the transmitters learn the interference before or after the conference. It follows as a corollary that also for the MAC with degraded message sets, the interference can be perfectly mitigated if it is known noncausally to the transmitters. To derive our results, we generalize Costa's single-user writing-on-dirty-paper achievability result to channels with dependent interference and not-necessarily Gaussian noise. [ABSTRACT FROM AUTHOR]

A wideband Rayleigh fading channel is considered with causal channel state information (CSI) at the transmitter and no receiver CSI. A simple orthogonal code with energy detection rule at the receiver (similar to pulse position modulation in IEEE Trans. Inf. Theory, vol. 46, no. 4, Apr. 2000 and IEEE Trans. Inf. Theory, vol. 52 no. 5, May 2006) is shown to achieve the capacity of this channel in the wideband limit. This strategy transmits energy only when the channel gain exceeds a threshold, hence only needs causal transmitter CSI. In the wideband limit, this capacity without any receiver CSI is the same as the capacity with full receiver CSI, which is proportional to the logarithm of the bandwidth. Similar threshold-based pulse position modulation is shown to achieve the capacity per unit cost of the dirty-tape channel (dirty paper channel with causal transmitter CSI and no receiver CSI), which equals its capacity per unit cost with full receiver CSI. Then, a general discrete channel with i.i.d. states is considered. Each input has an associated cost and a zero cost input “0” exists. The channel state is assumed to be known at the transmitter in a causal manner. Capacity per unit cost is found for this channel and a simple orthogonal code is shown to achieve this capacity. Later, a novel orthogonal coding scheme is proposed for the case of causal transmitter CSI and a condition for equivalence of capacity per unit cost for causal and noncausal transmitter CSI is derived. [ABSTRACT FROM PUBLISHER]

Abstract: This article analyses the interferences in the quantification of traces of bisphenol S in paper by applying the direct analytical method “analytical pyrolysis gas chromatography mass spectrometry” (Py-GC/MS) in conjunction with on-line derivatisation with tetramethylammonium hydroxide (TMAH). As the analytes are simultaneously analysed with the matrix, the interferences derive from the matrix. The investigated interferences are found in the analysis of paper samples, which include bisphenol S derivative compounds. As the free bisphenol S is the hydrolysis product of the bisphenol S derivative compounds, the detected amount of bisphenol S in the sample may be overestimated. It is found that the formation of free bisphenol S from the bisphenol S derivative compounds is enhanced in the presence of tetramethylammonium hydroxide (TMAH) under pyrolytic conditions. In order to avoid the formation of bisphenol S trimethylsulphonium hydroxide (TMSH) is introduced. Different parameters are optimised in the development of the quantification method with TMSH. The quantification method based on TMSH thermochemolysis has been validated in terms of reproducibility and accuracy. [Copyright &y& Elsevier]

Concerning the PIXE analysis of Cr(VI) in water using ion-exchange filters, the limit of detection (LOD) and the influence of matrix anions were investigated. In order to look for the experimental condition for obtaining the minimum LOD, we measured the Cr-Kα X-ray counts and background counts under the Kα X-ray peak as a function of the incident proton energy and the thickness of the Mylar absorber foil in front of the detector. To investigate the interference by coexisting anions, each of PO43-, SO42-, NO3-, Cl-, and F- ions and Cr(VI) ions were mixed in aqueous solutions and adsorbed on DE81-DEAE cellulose paper, a weakly basic anion exchanger with diethylaminoethyl functional groups. Then the filter samples were measured by PIXE using 2.5 MeV proton beams. We obtained a LOD of 0.16 µg or 8 ppb for 20 mL samples at a proton energy of 2.5 MeV and a Mylar film thickness of 50 or 100 µm. The experimental results on the mixed solutions indicated that NO3-, Cl-, and F- as coexisting ions didn't interfere significantly with determination of a 50 µg/L Cr(VI) concentration for 40 mL total solution volume, despite the total amount of anions was about 90% of ion exchange capacity of a filter. On the other hand, slight interferences by PO43- ions were observed. However, under the same condition, we found that if the total amount of SO42- ions was higher than 20% of ion exchange capacity, they induced significant interferences in determining Cr(VI). [ABSTRACT FROM AUTHOR]

The aim of this paper is to analyse the translation performance of German students at the University of Prishtina when translating literary texts from German into Albanian. The paper focuses on the question of whether errors occur during the translation process in the areas of grammar, orthography, semantics, and sentence structure, including possible interference errors between the two languages. These errors may arise due to uncertainties, carelessness, or the influence of other languages. The interference of German manifests itself primarily in the lexical level and sentence structure. If the languages have differences in sentence structure, this interference leads to grammatically incorrect sentences. An interference of Albanian is also noticeable, primarily on a pragmatic level, which is mainly determined by the cultural context. Errors are a characteristic feature of foreign language learners. They are a phenomenon that affects not only foreign language learners but also native speakers. This paper analyses and classifies the errors that German students at the University of Prishtina make when translating by applying the theoretical, analytical, and contrastive methods in the translation of literary texts. [ABSTRACT FROM AUTHOR]

Superchannel transmission is a candidate to realize Tb/s-class high-speed optical communications. In order to achieve higher spectrum efficiency, the channel spacing shall be as narrow as possible. However, densely allocated channels can cause non-negligible inter-channel interference (ICI) especially when the channel spacing is close to or below the Nyquist bandwidth. In this paper, we consider joint decoding to cancel the ICI in dense superchannel transmission. To further improve the spectrum efficiency, we propose the use of Han–Kobayashi superposition coding. In addition, for the case when neighboring subchannel transmitters can share data, we introduce dirty-paper coding for pre-cancelation of the ICI. We analytically evaluate the potential gains of these methods when ICI is present for sub-Nyquist channel spacing. [ABSTRACT FROM PUBLISHER]

In this paper, the sequence families of which maximum correlation is determined by the Weil bound of exponential sums are revisited. Using the same approach, two new constructions with large family sizes and low maximum correlation are given. The first construction is an analog of one recent result derived from the interleaved structure of Sidel'nikov sequences. For a prime p and an integer M\vert (p-1), the new M-ary sequence families of period p are obtained from irreducible quadratic polynomials and known power residue-based sequence families. The new sequence families increase family sizes of the known power residue-based sequence families, but keep the maximum correlation unchanged. In the second construction, the sequences derived from the Weil representation are generalized, where each new sequence is the elementwise product of a modulated Sidel'nikov sequence and a modulated trace sequence. For positive integers d

• Review of characterization techniques for few mode fibers and components. • Focus is on interferometric methods. • Simple interferometric setup for measuring mode coupling and DGD. • Improved algorithm for spatial and spectral resolved imaging for the two modes. • Effect of the rotation of asymmetric modes. This paper reviews characterization techniques for few mode fibers and components. The focus is on interferometric techniques including spatial and spectral resolved imaging (S2). Simple interferometric measurements are shown to be able to give quite comprehensive information including measurement of relative group delay. A new improved algorithm for analyzing S2 data for the case of only two modes is presented. The effect of polarization and rotation of asymmetric modes is treated as well. [ABSTRACT FROM AUTHOR]

In this paper, we consider precoder designs for multiuser multiple-input-single-output broadcasting channels. Instead of using a traditional linear zero-forcing (ZF) precoder, we propose a generalized ZF (GZF) precoder in conjunction with successive dirty-paper coding (DPC) for data transmissions, namely, the GZF-DP precoder, where the suffix “DP” stands for “dirty-paper.” The GZF-DP precoder is designed to generate a band-shaped and lower triangular effective channel F , such that only the entries along the main diagonal and the $\nu $ first lower-diagonals can take non-zero values. Utilizing the successive DPC, the known non-causal inter-user interferences from the other (up to) $\nu $ users are canceled through successive encoding. We analyze optimal GZF-DP precoder designs both for sum-rate and minimum user-rate maximizations. Utilizing Lagrange multipliers, the optimal precoders for both cases are solved in closed-forms in relation to optimal power allocations. For the sum-rate maximization, the optimal power allocation can be found through water filling, but with modified water levels depending on the parameter $\nu $ , while for the minimum user-rate maximization that measures the quality of the service, the optimal power allocation is directly solved in closed-form, which also depends on $\nu $ . Moreover, we propose two low-complexity user-ordering algorithms for the GZF-DP precoder designs for both maximizations, respectively. We show, through numerical results, that the proposed GZF-DP precoder with a small $\nu $ value (≤ 3) renders significant rate increments compared with the previous precoder designs, such as the linear ZF and the user-grouping-based DPC precoders. [ABSTRACT FROM PUBLISHER]

Despite significant advancements in detecting Cd(II) using nanomaterials-modified sensitive interfaces, most detection methods rely solely on a single electrochemical stripping current to indicate concentration. This approach often overlooks potential inaccuracies caused by interference from coexisting ions. Therefore, establishing multi-dimensional signals that accurately reflect Cd(II) concentration in solution is crucial. In this study, we developed a system integrating concentration, electrochemical stripping current, and laser-induced breakdown spectroscopy (LIBS) characteristic peak intensity through in-situ laser-induced breakdown spectroscopy and electrochemical integrated devices. By simultaneously acquiring multi-dimensional signals to dynamically track the electrochemical deposition and stripping processes, we observed that replacement reactions occur between Cu(II) and Cd(II) on the surface of Ru-doped MoS 2 modified carbon paper electrodes (Ru-MoS 2 /CP). These reactions facilitate the oxidation of Cd(0) to Cd(II) during the stripping process, significantly increasing the currents of Cd(II). Remarkably, the ingenious design of the Ru-MoS 2 sensitive interface allowed for the undisturbed deposition of Cu(II) and Cd(II) during the electrochemical deposition process. Consequently, our in-situ integrated device achieved accurate detection of Cd(II) in complex environments, boasting a detection sensitivity of 8606.5 counts μM⁻1. By coupling multi-dimensional signals from stripping current and LIBS spectra, we revealed the interference process between Cu(II) and Cd(II), providing valuable insights for accurate electrochemical analysis of heavy metal ions in complex water environments. [Display omitted] • Multi-dimensional signals including concentration, stripping current, and laser-induced breakdown spectroscopy. • Multi-dimensional signals collected simultaneously enable dynamic track of deposition and stripping processes. • Replacement reactions occur between Cu(II) and Cd(II) on the surface of Ru doped MoS 2 modified carbon paper electrodes. • Accurate detection of Cd(II) in complex environments through multi-dimensional signals. [ABSTRACT FROM AUTHOR]

In wireless communications networks, the non-orthogonal multiple access (NOMA) technique is different from the existing orthogonal multiple access (OMA) techniques. In NOMA, the available number of resources are more and it leads to multiple access interference. In this paper, initially we developed an analytical framework of interference for NOMA in terms of signal to interference ratio (SIR). Later, we asses the outage probability of NOMA based downlink communication system by considering the effect of interference. The outage probability of NOMA with fixed number of interferers is calculated for different channel propagation effects as Nakagami-m, Rayleigh faded channels with and without log-normal shadowing. The obtained outage probabilities with fixed number of interferers are used to calculate the outage probabilities with random number of interferers (total system outage probability) in different channel propagation effects. In this paper, we proposed a novel algorithm to calculate the total system outage probability for NOMA in different channel propagation effects by choosing different offered load in terms of Erlangs per cell. We calculate the analytical results of outage probability for two users which are at near and edge positions of the cell. The obtained analytical results are supported with simulated NOMA. [ABSTRACT FROM AUTHOR]

We consider the beamformer design for multiple-input multiple-output (MISO) broadcast channels (MISO BCs) using zero-forcing dirty paper coding (ZF-DPC). Assuming a sum power constraint (SPC), most previously proposed beamformer designs are based on the QR decomposition (QRD), which is a natural choice to satisfy the ZF constraints. However, the optimality of the QRD-based design for ZF-DPC has remained unknown. In this paper, first, we analytically establish that the QRD-based design is indeed optimal for any performance measure under a SPC. Then, we propose an optimal beamformer design method for ZF-DPC with per-antenna power constraints (PAPCs), using a convex optimization framework. The beamformer design is first formulated as a rank-1-constrained optimization problem. Exploiting the special structure of the ZF-DPC scheme, we prove that the rank constraint can be relaxed and still provide the same solution. In addition, we propose a fast converging algorithm to the beamformer design problem, under the duality framework between the BCs and multiple access channels (MACs). More specifically, we show that a BC with ZF-DPC has the dual MAC with ZF-based successive interference cancellation (ZF-SIC). In this way, the beamformer design for ZF-DPC is transformed into a power allocation problem for ZF-SIC, which can be solved more efficiently. [ABSTRACT FROM PUBLISHER]

Dirty paper coding (DPC) offers an information-theoretic result for pre-cancellation of known interference at the transmitter. In this letter, we propose practical DPC schemes that use only one error correction code. Our designs focus on practical use from the viewpoint of complexity. For fair comparison with previous schemes, we compute the complexity of proposed schemes by the number of operations used. Simulation results show that compared to previous DPC schemes, the proposed schemes require lower transmission power to maintain the bit error rate to be within 10^-5 . [ABSTRACT FROM PUBLISHER]

The holographic signal-processing method for a single vector scalar receiver (VSR) in the high-frequency band in shallow water is developed in the paper. The aim of this paper is to present the results of the theoretical analysis, numerical modeling, and experimental verification of holographic signal processing for a noise source by the VSR. The developed method is based on the formation of the 2D interferogram and 2D hologram of a noise source in a shallow-water waveguide. The 2D interferograms and 2D holograms for different channels of the VSR (P sound pressure and V X and V Y vibration velocity components) are considered. It is shown that the 2D interferogram consists of parallel interference fingers in the presence of a moving noise source. As a result, the 2D hologram contains focal points located on a straight line, and the angular distribution of the holograms has the main extreme value. It is shown in the paper that the holographic signal-processing method allows detecting the source, estimating the source bearing, and filtering the useful signal from the noise. The results of the source detection, source bearing estimation, and noise filtering are presented within the framework of experimental data processing and numerical modeling. [ABSTRACT FROM AUTHOR]

Cognitive Radio (CR) is developed to provide effective spectrum usage. CR is much significant in improving the efficiency of the global internet in applications. The evolutionary measurement technology is utilised to improve the evaluation of channel-state information. The outcome attained very few spectrums sensing in CR for complex mobility. A good optimisation method is needed to improve the accurate channel state prediction in successful channel access. Thus, this paper aims to implement a novel power and channel allocation mechanism with the help of a new Modified Levy Flight-based Artificial Ecosystem Optimisation (MLF-AEO) Optimisation Strategy. This paper achieves the optimal power control and channel allocation mechanism intending to solve the multiple objective functions based on the constraints like Interference among users, Outage Probability, and throughput. The superiority of the proposed algorithm is thoroughly verified by various simulation results. [ABSTRACT FROM AUTHOR]

The paper examines the application of adaptive antennas in wireless communication systems with particular attention to how well they can transmit and receive signals by dynamically adjusting radiation patterns. The review covers a range of artificial intelligence (AI) approaches that have been used to enhance adaptive antenna performance in beamforming, channel estimation, interference mitigation, and spectrum utilization. Besides adaptive antennas' potential to improve wireless communication systems, the paper also discusses their limitations, including computational complexity, interference sensitivity, and the significance of precise channel state information (CSI) estimates. [ABSTRACT FROM AUTHOR]

In this paper, we study the diversity-multiplexing-gain tradeoff (DMT) of wireless relay networks under the half-duplex constraint. It is often unclear what penalty if any, is imposed by the half-duplex constraint on the DMT of such networks. We study two classes of networks; the first class, called KPP(I) networks, is the class of networks with the relays organized in K parallel paths between the source and the destination. While we assume that there is no direct source-destination path, the K relaying paths can interfere with each other. The second class, termed as layered networks, is comprised of relays organized in layers, where links exist only between adjacent layers. [ABSTRACT FROM PUBLISHER]

This paper considers the downlink of a cognitive radio (CR) network formed by multiple primary and secondary transmitters, where each multiantenna transmitter serves a preknown set of single-antenna users. This paper assumes that the secondary and primary transmitters can simultaneously transmit their data over the same frequency bands to achieve high system spectrum efficiency. This paper considers the downlink balancing problem of maximizing the minimum signal-to-interference-plus-noise ratio (SINR) of the secondary transmitters subject to both the total power constraint of the secondary transmitters and the maximum interference constraint at each primary user due to secondary transmissions. This paper proposes solving the problem using the alternating direction method of multipliers, which leads to a distributed implementation through limited information exchange across the coupled secondary transmitters. This paper additionally proposes a solution that guarantees feasibility at each iteration. Simulation results demonstrate that the proposed solution converges to the centralized solution in a reasonable number of iterations. [ABSTRACT FROM AUTHOR]

In this paper, we propose a two-ring conjugated vortex beam interferometer. The inner ring and outer ring of the vortex beams has different signs and topological charges. When combined, they produce an intricate pattern of interference fringes that resemble a flower petal, featuring both concentric inner and outer rings which rotates with different directions. We use the scale-invariant feature transformation algorithm to find the feature points. Then we use these points to measure the rotation angle of the outer ring relative to the inner ring and calculate the displacement based on it. We realize the measurement of sub-nanometer displacement. The displacement resolution is 0.38° nm−1. It is improved by about 12.55% compared with only the inner ring. The displacement corresponding to the minimum detectable angle of CCD is reduced from 0.080 nm to 0.060 nm. It will be a promising method in precision machining micro-vibration sensing, surface unevenness sensing, and microbial movement sensing and high-precision measurement of micro-displacement. [ABSTRACT FROM AUTHOR]

A method to record the holographic gratings for achieving variable output intensity in different exposure zones is proposed. The desired periodic fringes are obtained according to the analytical formula based on interference. Numerical results show that the method can fabricate the gratings with variable modulated intensity successfully. [ABSTRACT FROM AUTHOR]

The future connectivity landscape, and notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC, as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, also termed interface diversity. This paper also touches on the importance of the proper statistical methodology for designing and assessing extremely high-reliability levels. [ABSTRACT FROM AUTHOR]

This paper studies the effectiveness of relaying for interference mitigation in an interference-limited communication scenario. We are motivated by the observation that in a cellular network, a relay node placed at the cell edge observes a combination of intended signal and inter-cell interference that is correlated with the received signal at a nearby destination, so a relaying link can effectively allow the antennas at the relay and at the destination to be pooled together for both signal enhancement and interference mitigation. We model this scenario by a multiple-input multiple-output (MIMO) Gaussian relay channel with a digital relay-to-destination link of finite capacity, and with correlated noise across the relay and destination antennas. Assuming a compress-and-forward strategy with Gaussian input distribution and quantization noise, we propose a coordinate ascent algorithm for obtaining a stationary point of the non-convex joint optimization of the transmit and quantization covariance matrices. For fixed input distribution, the globally optimum quantization noise covariance matrix can be found in closed-form using a transformation for the relay’s observation that simultaneously diagonalizes two conditional covariance matrices by congruence. For fixed quantization, the globally optimum transmit covariance matrix can be found via convex optimization. This paper further shows that such an optimized achievable rate is within a constant additive gap of the MIMO relay channel capacity. The optimal structure of the quantization noise covariance enables a characterization of the slope of the achievable rate as a function of the relaying link capacity. Moreover, this paper shows that the improvement in spatial degrees of freedom by MIMO relaying in the presence of noise correlation is related to the aforementioned slope via a connection to the deterministic relay channel. [ABSTRACT FROM AUTHOR]

This paper provides an analytical performance characterization of both the uplink (UL) and downlink (DL) user-centric network multiple-input multiple-output (MIMO) systems, where a cooperating base station (BS) cluster is formed for each user individually and the clusters for different users may overlap. In this model, cooperating BSs (each equipped with multiple antennas) jointly perform zero-forcing beamforming to the set of single-antenna users associated with them. As compared with a baseline network MIMO system with disjoint BS clusters, the effect of user-centric clustering is that it improves signal strength in both the UL and DL, while reducing cluster-edge interference in the DL. This paper quantifies these effects by assuming that BSs and users form Poisson point processes and by further approximating both the signal and interference powers using Gamma distributions of appropriate parameters. We show that BS cooperation provides significant gain as compared to single-cell processing for both the UL and DL, but the advantage of user-centric clustering over the baseline disjoint clustering system is significant for the DL cluster-edge users only. Although the analytic results are derived with the assumption of perfect channel state information and infinite backhaul between the cooperating BSs, they nevertheless provide architectural insight into the design of the future cooperative cellular networks. [ABSTRACT FROM AUTHOR]

This paper delves into the imperative need for coexistence and compatibility in the 470–694 MHz frequency band, as mandated by the World Radiocommunication Conference 2015 (WRC-15) and the WRC-23. It focuses on challenges in the coexistence of Digital Terrestrial Television Broadcasting (DTTB) and International Mobile Telecommunications-2020 (IMT-2020) services in downlink-only mode, particularly in adjacent-channel scenarios. Using Monte Carlo simulations, the study evaluates the probability of interference from IMT base stations with DTTB reception. The analysis thoroughly investigates the impact of the IMT transmitter's Adjacent Channel Leakage Ratio (ACLR) and the DTTB receiver's Adjacent-Channel Selectivity (ACS) on the probability of interference. The results demonstrate a significant degradation in the DTTB reception probability at the edge of coverage based on standard assumptions. To address these challenges, this paper provides recommendations for mitigating interference. These include defining enhanced ACLR regulations for IMT base stations, implementing antenna discriminations, providing specialized filters, and establishing national coordination procedures. The research provides valuable insights for informed decision making in spectrum management within the 470–694 MHz band, aiming to facilitate the coexistence of DTTB and IMT-2020 services, in line with international regulations and best practices. [ABSTRACT FROM AUTHOR]

Using binary phase shift keying is one of the popular methods used for designing optical logic gates. In this paper, we used optical waveguides with different lengths for designing an all-optical XOR gate. The proposed structure works based on constructive and destructive interference of optical beams. The time delay of the proposed structure is 0.5 ps. [ABSTRACT FROM AUTHOR]

The aspects of sum rate and fairness for dirty paper coding (DPC) based MIMO downlink communications are investigated in this paper. We first apply the $\ell _{1}$ -norm fairness measure to formulate the problem of fairness maximization for a given sum rate as an optimization problem. The problem is unfortunately nonconvex and cannot be efficiently solved. To overcome the difficulty, we invoke the uplink-downlink duality to transform the problem back and forth between uplink and downlink communications. An efficient, iterative waterfilling based algorithm is then proposed to yield achievable rates with the best possible fairness values. Simulation results show that the proposed approach offers an enormous gain in the achievable sum rates for a wide range of fairness values, when compared to the popular successive zero-forcing DPC-based and block diagonalization based coding schemes. [ABSTRACT FROM AUTHOR]

The explosive growth of Internet-of-Things (IoT) applications such as smart cities and Industry 4.0 have led to drastic increase in demand for wireless bandwidth, hence motivating the rapid development of new techniques for enhancing spectrum utilization needed by new generation wireless communication technologies. Among others, dynamic spectrum access (DSA) is one of the most widely accepted approaches. In this paper, as an enhancement of existing works, we take into consideration of inter-node collaborations in a dynamic spectrum environment. Typically, in such distributed circumstances, intelligent dynamic spectrum access almost invariably relies on self-learning to achieve dynamic spectrum access improvement. Whereas, this paper proposes a DSA scheme based on deep reinforcement learning to enhance spectrum and access efficiency. Unlike traditional Q-learning-based DSA, we introduce the following to enhance the spectrum efficiency in dynamic IoT spectrum environments. First, deep double Q-learning is adopted to perform local self-spectrum-learning for IoT terminals in order to achieve better dynamic access accuracy. Second, to accelerate learning convergence, federated learning (FL) in edge nodes is used to improve the self-learning. Third, multiple secondary users, who do not interfere with each other and have similar operation condition, are clustered for federated learning to enhance the efficiency of deep reinforcement learning. Comparing with the traditional distributed DSA with deep learning, the proposed scheme has faster access convergence speed due to the characteristic of global optimization for federated learning. Based on this, a framework of federated deep reinforcement learning (FDRL) for DSA is proposed. Furthermore, this scheme preserves privacy of IoT users in that FDRL only requires model parameters to be uploaded to edge servers. Simulations are performed to show the effectiveness of theproposed FDRL-based DSA framework. [ABSTRACT FROM AUTHOR]