Search

Stretchable displays based on conventional materials exhibit a trade‐off relationship between the pixel density and the stretchability. In this paper, we have demonstrated overcoming the technological limitations of stretchable displays through the optimization of serpentine‐shaped bridge design and the application of stretchable metal electrodes. The application of stretchable electrodes has increased stretchability by over 30% without compromising pixel density. [ABSTRACT FROM AUTHOR]

The paper presents a dynamic model of the TMM-3M heavy mechanized bridge during the span lowering stage. The model is constructed as a multi-body mechanical system, taking into account the elastic deformation of the cable, rear outriggers, front tires, and front suspension system. It is a mechanical model driven by a cable mechanism. Lagrangian equations of the second kind have been applied to establish a system of differential equations describing the oscillations of the mechanical system and serve as the basis for investigating the dynamics of the span-lowering process. The system of differential equations is solved using numerical methods based on MATLAB simulation software. The study has revealed laws of the displacement, velocity, and acceleration of components within the mechanical system, especially those related to the bridge span depending on the choice of the drive speed of the engine during lowering by operator. The research results show that the lowering time increases from 52 seconds to 104 seconds when the engine speed decreases from 1800 rpm to 900 rpm. The tension force on the cable is surveyed to confirm the safety conditions during the span-lowering process. The study also provides recommendations for selecting appropriate engine speeds to minimize span-lowering time while ensuring the safety conditions of the TMM-3M bridge during the span-lowering process. This research is an important part of a comprehensive study on the working process of the heavy mechanized bridge TMM-3M to make practical improvements, aiming to reduce deployment time, decrease the number of deployment crew members, and increase the automation capability of the equipment. [ABSTRACT FROM AUTHOR]

In this article, we report on sixth-grade students' responses to a set of problem activities that required the application of mathematics, science, and engineering knowledge in designing and constructing a paper bridge that could withstand an optimal load. Increasing students' application and awareness of their disciplinary learning and how they are applying this in an integrated STEM activity remains a challenge for educators. In addressing this issue, we included a focus on knowledge reflection and knowledge scaffolding through thought-provoking student workbooks. Among the findings are students' capabilities in planning, designing, reflecting, constructing, and redesigning. Students' planning indicated that they could justify their proposed bridge type/s, which often included a combination of types, by referring to their STEM understandings. At the same time, students remained cognizant of the problem boundaries. Students' design sketches indicated an awareness of the problem constraints, an understanding of basic engineering principles, and an application of mathematics and science knowledge. Students' reflections on their actions helped them to improve their bridge constructions. Suggestions are presented for knowledge scaffolding to facilitate the flexible and innovative application of STEM learning to new problem situations. [ABSTRACT FROM AUTHOR]

The emphasis in bridge design and construction technology in the UK has shifted in recent decades towards improved durability and quick construction, with whole life cost and low maintenance gradually becoming as important as initial capital cost. In conjunction with this, reduced disruption to the travelling public has become more important due to general increased travel and congestion on roads and railways. The combination of these two factors was a primary driver in the development of fibrere-inforced polymer (FRP) composite bridge technology, which can provide improved durability and also reduced time of in-situ construction due to large, lightweight components being manufactured off-site (modular construction) and installed simply and quickly. The growth in the application of FRP bridges in the UK is described and highlighted with a number of representative case studies, generally showing the benefits of this technology in reducing whole life cost and disruption to the public. The future work required to further enable the development of FRP bridge technology is described, with the aim of FRP bridges becoming a mainstream competitor to other bridge materials and technologies. [ABSTRACT FROM AUTHOR]

In places where deicing salts are used to keep roads free of ice, the bridge components most prone to corrosion are concrete deck slabs, which can be made corrosion-free by replacing the steel reinforcement by bars made of fibre reinforced polymer (FRP). Recent experimental investigation has shown that only the transverse bars at the bottom of the deck slab confine the slab for full arching action. The rest of the reinforcement in the two assemblies only controls the widths of environmental and fatigue-induced cracks. An experimental fatigue study on full-scale models of deck slabs showed that slabs with steel bars have the poorest fatigue resistance and slabs with glass fibre reinforced polymer (GFRP) bars the best. ISIS Canada conducted field studies in 2005 to show that the GFRP is not attacked by alkaline reaction in concrete. Because of this finding the Canadian Bridge Highway Bridge Design Code (CSA S06-06) permits GFRP as a primary reinforcement. [ABSTRACT FROM AUTHOR]

In Sweden, steel bridges are the most common solution regarding prefabricated short-span (15-35 m) pedestrian bridges. The most common bridge type for this application is a carbon steel truss bridge with an orthotropic deck consisting of a 10-12 mm deck plate and trapezoidal stiffeners. For these bridges, the deck is the main driver regarding economic and environmental costs, originating from, e.g., high material consumption and maintenance activities. This paper aims to compare the economic aspects between a conventional steel deck and an extruded aluminum deck from an investment cost perspective. The aluminum deck is homogenous, i.e., containing no mechanical connections. To perform this case study, an optimization routine is developed and executed for the aluminum alternative. This optimization study targets the minimum weight and is constrained by the Eurocode design code. A sub-model approach is adopted for the numerical analysis, based on shell and solid elements. The procedure to go from a cross-section defined by a set of parameters to reach the optimized bridge deck is presented. The studies that are reported in this paper show that the developed optimization routine gives satisfactory results. Furthermore, they indicate that homogenous extruded aluminum decks can be a viable deck option for pedestrian bridges. [ABSTRACT FROM AUTHOR]

Earthquakes in coastal areas frequently trigger tsunami waves, posing significant threats to low-lying coastal bridges. Investigating extreme wave force on bridge deck is crucial for understanding bridge damage mechanisms. However, the majority of current research focuses on single bridge deck, with limited analysis of wave impacts on twin bridge decks. In this paper, solitary wave is utilized to simulate tsunami wave, and a two-dimensional (2D) computational fluid dynamics (CFDs) model to analyze wave–bridge interactions and investigate the impact of tsunami wave on adjacent twin box-girder bridge decks. The numerical model was validated by solitary wave theory and wave force data obtained from the published experiment. Based on this model, the effects of the submergence coefficient, wave height, and deck spacing on the horizontal and vertical forces on the twin box-girder bridge decks were analyzed and compared with those in a single box-girder bridge deck. The results indicate that, firstly, due to wave reflection and the trapped water, the vertical wave force on the twin forward bridge deck significantly surpasses that on the single bridge deck. Furthermore, the twin backward bridge deck experiences greater horizontal force than single deck when the deck is completely submerged. Secondly, the maximum wave force on the twin bridge decks does not always consistently decrease with increasing deck spacing. Finally, the negative horizontal force would exceed the positive horizontal force on the twin forward bridge deck under higher wave. This paper delineates the disparities between twin and single box-girder bridge deck responses to wave action and analyzes the influencing factors. Such insights are pivotal for coastal bridge construction and natural disaster risk assessment. [ABSTRACT FROM AUTHOR]

Standards for the design of bridges, buildings and other infrastructure specify design loads for climatic hazards such as temperature, snow, wind, and floods based on return periods presented in maps or tables that account for regional differences. These design loads were developed from statistical analyses of historical hazard data under the assumption that the past is representative of the future. Climate change may affect the frequencies and intensities of environmental hazards which, depending on regional variations, raises questions as to whether structures designed to current specifications will meet minimum safety standards over their future service lives. This paper critically appraises issues related to using historical hazard data for future designs. It reviews basic principles of uniform reliability, that modern design codes use as the basis for ensuring minimum levels of safety, describing the relationship between hazard return periods, structural reliability, risk and the maximum loads expected within a structure's service life. Simple examples involving wind effects on structures demonstrate how to calibrate structural design hazard maps for climate-related extreme events to meet the minimum standards of safety implied in current specifications. The paper also introduces a possible practical approach to account for climate change when designing new structures and assessing the safety of existing facilities. [ABSTRACT FROM AUTHOR]

The construction industry is a challenging field for the application of robots. In particular, bridge construction, which involves many tasks at great heights, makes it difficult to implement robots. To construct a bridge, it is necessary to build numerous piers that can support the bridge deck. Pier construction involves a series of tasks including rebar connection, formwork installation, concrete pouring, formwork dismantling, and formwork reinstallation. These activities require working at heights, presenting a significant risk of falls. If bridge construction could be performed remotely using robots instead of relying on human labor, it would greatly contribute to the safety of bridge construction. This paper proposes a multi-robot system capable of remote operation and automation for rebar structure connection, concrete pouring, and concrete vibrating tasks in pier construction. The proposed multi-robot system for pier construction is composed of three robot systems. Each robot system consists of a robot arm mounted on a mobile robot that can move along rails. And to apply the proposed system to a construction site, it is essential to implement a compliance control algorithm that adapts to external forces. In this paper, we propose an admittance control that takes into account the weight of the tool for the compliance control of the proposed robot, which performs tasks by switching between various construction tools of different weights. Furthermore, we propose a synchronization control method for the multi-robot system to connect reinforcing structures. We validated the proposed algorithm through simulation. Furthermore, we developed a prototype of the proposed system to verify the feasibility of the suggested hardware design and control. [ABSTRACT FROM AUTHOR]

The safety risk analysis of urban elevated bridge construction is an important management method to reduce the loss of safety accidents, and it has significant scientific research value and engineering application value. Therefore, this study proposes a novel analysis method to address these challenges. Firstly, this paper constructs a Work Breakdown Structure (WBS)–Risk Breakdown Structure (RBS) matrix for the safety risk of urban elevated bridge construction in order to achieve a comprehensive and complete identification of the indicator system. Then, a combination of static weights and dynamic weights calculation methods is developed. The static weights are obtained using the analytic hierarchy process, while the dynamic weights are obtained based on the relationship between the dynamic scores of construction safety risk indicators in different construction stages and the preset evaluation levels. Finally, a case study of the Longlingshan elevated bridge project in Wuhan, China, is conducted to validate the feasibility of the proposed model and its potential application in projects. The case analysis for the first time reveals that with the progress of construction, the weights of each indicator continuously change, and the secondary indicators related to environmental factors, such as extreme high-temperature weather, undergo the greatest changes. A comparison of different dynamic weight calculation methods is conducted to highlight the advancement of the proposed model. The research findings of this paper will provide new insights and guidance for improving the construction safety of urban elevated bridge projects. [ABSTRACT FROM AUTHOR]

The city development is closely related to the performance of the transportation network system. Bridges and roads are important parts of the transportation system, and are also inseparable components of the transportation network. However, the effect of the correlation between bridges and roads on the network system has not been studies thoroughly in the literature. Therefore, it is necessary to analyse the vulnerability of the road network when both bridges and roads are involved. In this paper, the urban road network is modeled into the form of network connection and node, based on the analysis of the related research results of road network vulnerability in the literature. Taking the urban roads at all levels as the connection and the transportation hubs (including bridges) as the nodes, the paper puts forward the corresponding measurement indexes and calculation methods, and establishes the importance and correlation analysis model of roads and bridges in the urban road network. At last, the model is applied to the road network which is 5 × 3 km2 besides Yangpu Bridge of Shanghai for verification, the importance and correlation of specific roads and bridges in the analyzed urban road network are calculated, which provides a certain basis for dealing with various emergencies leading to the decline of urban road network vulnerability. In this paper, the importance analysis of urban road network is extended to the bridge correlation analysis, so that the proposed model of the vulnerability assessment of the urban road network system is more suitable for the increasingly demand of road and bridge construction in China, and provides a certain basis for dealing with the decline of road network vulnerability caused by various emergencies. [ABSTRACT FROM AUTHOR]

Presents call for nominations for the 2006 American Society of Civil Engineers Awards. Aim of the ASCE Honors and Awards Programs to advance the engineering profession by emphasizing exceptionally meritorious achievement; Complete descriptions of the awards and limitations that apply; Content of the nominations for papers; Contact information.

The Special Collection on Accelerated Bridge Construction is available in the ASCE library (https://ascelibrary.org/page/jbenf2/accelerated bridge construction). In this technique, a new bridge superstructure is constructed on an offset from the existing bridge, then the existing bridge superstructure is demolished and the new bridge superstructure is slid in place over the existing substructure or a new substructure, which is built underneath the existing bridge prior to sliding the new bridge superstructure. For repairing bridge columns, Farzad et al. ([9]), in their paper entitled "Retrofitting of bridge columns using UHPC", propose an innovative technique to repair damaged bridge columns by the use of thin layers of UHPC, which are applied to column concrete substrates. The bridge towers utilized segmental construction for each pier leg with steel pier caps; in addition, prefabricated deck panels with cast-in-place closure joints were utilized in the bridge superstructure. [Extracted from the article]

The paper describes load and resistance factor design (LRFD) calibration for the resistance factor used in the Stiffness Method internal stability soil failure limit state for geogrid mechanically stabilized earth (MSE) walls. The Stiffness Method was recently adopted in the current American Association of State Highway and Transportation Officials LRFD Bridge Design Specifications in the US, and will appear in the next edition of the Canadian Highway Bridge Design Code. The paper describes the details of the calibration of the soil failure limit state which is unique to the Stiffness Method. Calibration outcomes include consideration of the concept of level of understanding in the selection of nominal load and resistance values which is unique to LRFD foundation engineering practice in Canada. A practical conclusion from these calculations is that if product line-specific creep test data are available to estimate the reinforcement secant creep stiffness used for design, then a resistance factor of 1.0 is reasonable for US practice. If only minimum average roll value tensile strength data are available, then a value of 0.95 is recommended for US practice. For Canadian practice, the corresponding values for typical level of understanding are 0.90 and 0.85, respectively. [ABSTRACT FROM AUTHOR]

To address the rapidly growing demands of traffic congestion, more highway bridges have been constructed, especially curved bridges. With more curved bridges designed and constructed, people have conducted a comprehensive analysis of the structural performance. Due to the nature of the structural complexity of curved bridges, dynamic responses of the curve bridges vary dramatically from the standard linear bridges. Although some work has been conducted to investigate the curved bridge dynamic analysis under seismic inputs, the framework for analyzing the curved bridges' vulnerability under various angles of inputs is still lacking. In this paper, we conducted a series of curved bridge seismic analyses based on different inputs and conducted a parametric study of the bridge performance using finite element models. We conducted time history analyses by applying seismic inputs to investigate the bridge dynamic responses based on different angle inputs and other different structural parameters. We developed an approach identifying the most vulnerable direction of the seismic inputs and the strongest dynamic responses for curved bridges based on time series analysis. This approach was validated with the dynamic analysis of a simplified bridge model. The method developed in this paper will help improve the curved bridge design code and further provide suggestions about mitigating seismic response for device design. [ABSTRACT FROM AUTHOR]

Early tied-arch bridges cannot satisfy the current traffic load demand due to their load grades and maintenance levels. Also, these tied-arch bridges have accumulated structural damage with increasingly prominent safety risks. In order to accurately evaluate the characteristics of tied-arch bridges' structural-influenced lines and identify damage of their arch ribs and suspenders, two analytical solutions are derived and established in this paper for the thrust-influenced lines of parabola and catenary two-hinged arches with a tie beam. A new method and an index for identifying damage of arch ribs and suspenders of tied-arch bridges are proposed. The results of numerical simulation in this paper verified that the proposed analytical solution has good analytical accuracy in practice on those two-hinged nonflat arches. With the use of equivalent thrust-influenced line difference curvature, the effectiveness of damage identification and the verification method were verified on the tie beam, suspender, and arch rib of plane tie arch structure as well as the suspender and arch rib of tied-arch bridges in this research. Furthermore, combining with grey relation analysis, the noise immunity of the proposed index method can be verified. Also, thrust-influenced line recognition based on VMD (variational mode decomposition) is introduced, and a practical process of bridge health assessment based on the quasistatic-influenced line loading of three-axle heavy vehicles is established. Theoretical analysis and numerical verification show that the calculated error of the analytic solution of two-hinged arches with a rise-span ratio greater than 1/8 is less than 9.57%, and the error decreases with the increase of the rise-span ratio. Therefore, it can be applied to the calculation and analysis of tied-arch bridges with a rise-span ratio range between 1/4 and 1/5. With the equivalent thrust-influenced line index proposed in this paper, the damage of suspenders and arch ribs of tied-arch bridges can be accurately located. It has been found that the proposed method is more effective to identify the damage of suspenders than the damage of arch ribs does, showing good noise immunity. In summary, this research has provided theoretical support for arch bridge design and evaluation. Combining with existing bridge-monitoring methods, the new bridge damage identification method proposed in this paper has the prospect of realizing the normal health status assessment of existing tied-arch bridges. [ABSTRACT FROM AUTHOR]

The Gordie Howe International Bridge project is providing a new modern border crossing between Windsor, ON, Canada and Detroit, MI, USA. The centrepiece of the project is a 2.5 km long cable-stayed bridge with 853 m main span over the Detroit River and 220 m tall towers on both sides of the river. In addition to the bridge, the project includes ports of entry on both sides of the border and a new freeway interchange with Interstate-75 in Detroit. The project was procured as a public–private partnership that allowed the proponents to propose either a suspension or cable-stayed bridge, with the ultimate selection creating the longest cable-stayed bridge in North America. The paper outlines the need for the new border crossing and results of the environmental assessment process, as well as describing the project evolution from planning through procurement and into detailed design. The scoping of the bridge design parameters is discussed, including: comprehensive geotechnical investigation; load study to develop project-specific live loading; the approach for durability requirements to achieve a service life of 125 years; special considerations for security; wind engineering; and compliance with both Canadian and US design codes. The paper also discusses the approach to achieving an aesthetically pleasing bridge design. [ABSTRACT FROM AUTHOR]

This paper focuses on the design as well as on the experimental and numerical validations of the mechanical behavior of a precast ultra-high performance fibre reinforced concrete (UHPFRC) retaining walls. The design, made in accordance with the Canadian Highway Bridge Design Code (CSA S6, 2019), led to the fabrication of a full-scale UHPFRC retaining wall with 3% fibre content which had dimensions of 3 m in height, 2 m in length, 2 m in width, with two vertical and horizontal stiffeners, and very thin vertical and horizontal panels of 40 and 65 mm, respectively. The experimental tests showed that the UHPFRC retaining wall exceeded by 42% the ultimate limit state (ULS) design factored bending moment and showed a very ductile behavior under flexural loading. At service limit state (SLS), the retaining wall had maximum crack opening between 0.15 and 0.28 mm, and a maximum lateral displacement of 4 mm. The finite-element model developed for the application captured accurately the flexural behavior of the UHPFRC retaining wall and was used later in parametric studies to optimize the design. The retaining wall optimal design includes UHPFRC with 3% fibre content and stiffeners with variable cross-section which allows volume reductions of 73% for concrete and 86% for rebars in comparison to the conventional reinforced concrete design. [ABSTRACT FROM AUTHOR]

Accelerated bridge construction (ABC) is prevalent all over the world attributable to its technical advantages including the higher construction efficiency, less traffic disruption, and higher construction quality. Grouting sleeves (GS) and grouting corrugated pipes (GCP) are the traditional connection methods of ABC in high seismic regions, with the disadvantages of uncompacted grouting and high requirement of construction accuracy. To this end, this paper developed a new type of prefabricated concrete bridge pier connected with ultra-high performance concrete (PCBP–UHPC) jacketing to solve the problems. To validate the seismic performance of the proposed innovative bridge pier, quasi-static tests on three full-scale specimens PCBP–UHPC, PCBP–GS, and PCBP–GCP were carried out. The results indicated that the failure mode of specimen PCBP–UHPC was similar to that of specimens PCBP–GS and PCBP–GCP with the characteristics of longitudinal steel yielding and concrete crushing at the base of the hollow pier. The obvious plastic hinge outward shifting could be observed during the loading for specimen PCBP–UHPC. The positive ultimate load of specimen PCBP–UHPC was 636.33 kN, which was 14.8% and 13.3% higher than those of specimens PCBP–GS and PCBP–GCP, respectively. In addition, a refined finite element model (FEM) was established by ABAQUS to provide an in-depth understanding on the failure mechanism of the proposed PCBP–UHPC. The parametric analyses were conducted to reveal the influence of the socket depth and axial compression ratio on seismic performance of the proposed PCBP–UHPC. The results indicated that the socket depth had little effect on seismic performance of the prefabricated pier, while the ultimate load bearing capacity of specimen PCBP–UHPC increased to some extent as the increase of the axial compression ratio. The present research work provides an innovative prefabricated bridge pier and a comprehensive experimental–numerical understanding on its seismic performance, which is beneficial for its engineering application. [ABSTRACT FROM AUTHOR]

The presented paper focuses on testing the performance of a SLAM scanner Zeb Horizon by GeoSLAM for the creation of a digital model of a bridge construction. A cloud acquired using a static scanner Leica ScanStation P40 served as a reference. Clouds from both scanners were registered into the same coordinate system using a Trimble S9 HP total station. SLAM scanner acquisition was performed independently in two passes. The data acquired using the SLAM scanner suffered from relatively high noise. Denoising using the MLS (Moving Least Squares) method was performed to reduce noise. An overall comparison of the point clouds was performed on both the original and MLS-smoothed data. In addition, the ICP (Iterative Closest Point) algorithm was also used to evaluate local accuracy. The RMSDs of MLS-denoised data were approximately 0.02 m for both GeoSLAM passes. Subsequently, a more detailed analysis was performed, calculating RMSDs for several profiles of the construction. This analysis revealed that the deviations of SLAM data from the reference data did not exceed 0.03 m in any direction (longitudinal, transverse, elevation) which is, considering the length of the bridge of 133 m, a very good result. These results demonstrate a high applicability of the tested scanner for many applications, such as the creation of digital twins. [ABSTRACT FROM AUTHOR]

Predicting wind speed in advance at bridge sites is essential for ensuring bridge construction safety under high wind conditions. This study proposes a short-term speed prediction model based on outlier correction, Wavelet Denoising, the Osprey Optimization Algorithm (OOA), and the Transformer model. The outliers caused by data entry and measurement errors are processed by the interquartile range (IQR) method. By comparing the performance of four different wavelets, the best-performing wavelet (Bior2.2) was selected to filter out sharp noise from the data processed by the IQR method. The OOA-Transformer model was utilized to forecast short-term wind speeds based on the filtered time series data. With OOA-Transformer, the seven hyperparameters of the Transformer model were optimized by the Osprey Optimization Algorithm to achieve better performance. Given the outstanding performance of LSTM and its variants in wind speed prediction, the OOA-Transformer model was compared with six other models using the actual wind speed data from the Xuefeng Lake Bridge dataset to validate our proposed model. The experimental results show that the mean absolute percentage error (MAPE), root mean square error (RMSE), and coefficient of determination ( R 2 ) of this paper's method on the test set were 4.16%, 0.0152, and 0.9955, respectively, which are superior to the other six models. The prediction accuracy was found to be high enough to meet the short-term wind speed prediction needs of practical projects. [ABSTRACT FROM AUTHOR]

With rapid advances in design methods and structural analysis techniques, computational generative design strategies have been adopted more widely in the field of architecture and engineering. As a performance-based design technique to find out the most efficient structural form, topology optimization provides a powerful tool for designers to explore lightweight and elegant structures. Building on this background, this study proposes an innovative pedestrian bridge design, which covers the process from conceptualization to detailed design implementation. This pedestrian bridge, with a main span of 152 m, needs to meet some unique architectural requirements, while addressing multiple engineering challenges. Aiming to reduce the depth of the girder but still meeting the load-carrying capacity requirements, the superstructure of this bridge adopts a variable-depth spinal-shaped girder in the center of its deck, thus forming an elegant curving facade, from which one pathway cantilevers on either side. At one end of the bridge, given considerable elevation difference between the bridge deck and the ground, a two-level Fibonacci-type spiral-shaped bicycle ramp is provided. The superstructure is supported by a series of organic tree-shaped branching piers resulting from the topology optimization. The ingenious design for the elegant profile of the bicycle ramp generates an enjoyable and dynamic crossing experience, with scenic views in all directions. By virtue of technological innovation, the pedestrian bridge is expected to create an iconic, cost-effective, and low-maintenance solution. A brief overview of the theoretical background of the bi-directional evolutionary structure optimization (BESO) and the multi-material BESO approach is also offered in this paper, while the construction requirements and challenges, conceptual development process, form-finding strategy, detailed design, and construction method of the bridge are presented. [ABSTRACT FROM AUTHOR]

Before the construction of a bridge begins, workers arrange the necessary parts and then cut and process them. The quality of the cutting layout directly affects the material utilization rate and the efficiency of the subsequent processes. During bridge construction, an intelligent part layout can improve work efficiency, save time, and reduce the labor intensity and production costs for the company. In this study, we studied a layout optimization algorithm, focusing on rectangular parts in the material preparation process. A mathematical model for the rectangular layout problem was constructed, and a hybrid genetic whale optimization algorithm is proposed that is a combination of the whale optimization algorithm and the genetic algorithm. Based on the "one size fits all" layout strategy, the materials are divided into strips, which are further divided into stacks, serving as the positioning strategy to determine the positional relationships of the parts. Test cases and actual engineering data were used to compare the layouts generated using different algorithms. The results show that the genetic whale algorithm proposed in this paper results in a high utilization rate and is highly effective. [ABSTRACT FROM AUTHOR]

Modern bridge construction towards a higher degree of low carbonization and assembly has been the general trend, while developing and broadening the low-carbon and assembled-oriented Accelerated Bridge Construction (ABC) technology can better realize the trade-offs between construction quality, efficiency, cost and sustainability. In the current mainstream ABC technologies such as precast-assembled concrete bridge and assembled steel bridge schemes, it is difficult to achieve an excellent balance between the above multicriterion trade-offs. To this end, this paper proposes a novel low-carbon and assembled composite bridge scheme as an innovative case of ABC technology based on a 26.7 km-length urban viaduct project in China with urgent environmental protection and assembly demands. Construction sustainability, the comprehensive economy and low-carbon performance are well balanced by the collaborative application of new steel–concrete composite structures, the rapid assembly interface design and low-carbon material technologies. The proposed scheme has been applied to a completed real-scale bridge, and the whole construction process only experienced 105 days of effective time, accompanied with slight environmental interference and construction noise and a small amount of labor and equipment input. In addition, the safety of the bridge, the rationality of the design concept and the calculation method have been verified by the static and dynamic loading tests of the real-scale bridge. [ABSTRACT FROM AUTHOR]

Owing to undesired hydraulic effects, bridge collapse accidents have become increasingly frequent during the flooding season. Considering hydraulic effects in bridge design is paramount to controlling and mitigating hydrological damage. Despite the efforts in previous studies on bridges under floods, a proper partial factor of hydraulic effects considering foundation scour is still lacking for bridge design against floods. To bridge the gap, this study proposed an inverse reliability analysis framework to generate a proper partial factor of hydraulic effects and a corresponding partial factor of resistance. First, failure modes of typical short- to medium-span bridges were summarized to construct limit state functions. Then, an inverse reliability analysis framework considering hydraulic effects was proposed. The optimum partial factors of hydraulic effects and corresponding partial factors of resistance were calculated for various design specifications. Finally, a classification early warning system of foundation scour was built to forecast hydraulic failure accurately. This paper reveals the necessity of considering the hydraulic effects of floods in bridge design. The proposed framework and warning system can effectively enhance bridge safety against floods. [ABSTRACT FROM AUTHOR]

Composite steel bridges in the United Sates are typically constructed using 22 mm-diameter (7/8 in.-diameter) shear studs. The number of shear studs on a girder can be significantly reduced by using larger-diameter studs. This study employed 11 push-out tests to investigate the static performance of 29 mm-diameter (1-1/8 in.-diameter) shear studs. An extensive welding investigation was conducted to develop the optimum welding parameters for 29 mm-diameter studs. Results from experiments showed the static strength of 29 mm-diameter studs satisfied stud strength equations in the AASHTO LRFD Bridge Design Specifications and Eurocode 4. The ductility of the 29 mm studs was comparable or better than that of 22 mm-diameter shear studs. Concrete cracking under service level loading was similar between specimens with 22 and 29 mm studs. Observations indicate that the minimum allowable stud penetration into the concrete deck may need to increase in order for the 29 mm-diameter studs to have good static performance. Using partial-depth precast concrete panels in the bridge deck reduced the static strength of both 22 and 29 mm-diameter shear studs in push-out specimens. Efficient steel bridge girder design makes use of a composite action between the concrete deck and the steel girders. Composite action is achieved by welding shear studs to the top flange of the steel girder during fabrication or erection. The number of shear studs needed is directly related to the individual stud strength, which is controlled by the stud diameter. The shear stud diameter most commonly used in steel bridge construction throughout most of the United States is 22 mm. This paper presents laboratory experiments evaluating the static strength of 29 mm-diameter shear studs. The test results showed that 29 mm-diameter shear studs have a static strength that satisfies US bridge design standards. Compared with 22 mm-diameter shear studs, the use of 29 mm-diameter shear studs is estimated to reduce the number of studs needed on a steel bridge girder by 40%. This reduction in the number of shear studs can enhance construction safety, reduce the cost of fabrication, and facilitate the use of partial-depth precast concrete deck panels, which in turn can increase the speed of construction. [ABSTRACT FROM AUTHOR]

The numerical model-based design is commonly applied to steel structures using advanced numerical models and analysis. These models often contain stress concentration zones, which can cause problems for designers within the evaluation process. There are two basic questions to answer in the design: (i) are these stress concentrations real physical stresses or numerical singularities and (ii) should these stresses be considered in the design process or can be neglected? The current paper shows a proposal to separate the real physical stresses from the numerical stress concentrations and an improved design method is introduced to consider or neglect them in the daily design. The proposed evaluation method is presented through a design example taken from the daily bridge design practice. The calculation method of the design check is presented first by using (i) linear analysis and (ii) geometrical and material non-linear analysis. Based on the comparison of these two calculation methods the evaluation process of the stress concentration zone is presented as an example. The paper introduces an evaluation method for the stress concentration zone, which can be applied to different structures similarly. [ABSTRACT FROM AUTHOR]

The article announces the award-winning papers from the Institution of Civil Engineers (ICE) for 2014 presented by president David Balmforth on October 9, 2015 including the Bill Curtin Medal and the John Henry Garood King Prize.

The process of bridge construction is accompanied by many uncertainties. These uncertainties can have an impact on the quality of bridge construction and are thus directly related to the safe operation of the bridge. Therefore, it is very important to conduct bridge construction quality control evaluations for safe bridge construction and operation. In this paper, a three-tier bridge construction quality control evaluation system is established. This study uses a combination of subjective and objective assignment methods and TOPSIS theory to carry out an evaluation calculation of bridge construction quality. The CWM-TOPSIS theory was applied to the actual engineering calculation by taking the construction process of a mega bridge across the Yellow River as an example. After a series of calculations, the bridge construction quality evaluation results were obtained as level IV. This showed that a construction quality control method was needed for this bridge as soon as possible, and inspection and protection of the bridge should be started to avoid the emergence of bigger quality problems. Finally, the accuracy and applicability of the method proposed in this paper were proved by comparing and analyzing the evaluation results with the standard element theory. [ABSTRACT FROM AUTHOR]

Accelerated bridge construction (ABC) has attracted much attention in China as a new and efficient construction method. However, the seismic performance of the connections between precast piers and other structures limits the application of ABC in medium and high seismic zones. In this paper, a quasi-static test was conducted to investigate the seismic performance differences between a cap–column socket connection (PSC) specimen, which reinforced an embedded RC column-to-precast cap beam with a socket connection, and a cast-in-place (CIP) cap–column specimen. A fiber-based finite element model that considers bond slippage between the connection reinforcement and wet joint concrete is proposed. The numerical simulation results compared with the experimental results show an error of about 12% in peak bearing capacity and about 2% in initial stiffness. The experimental and numerical results show that the PSC specimen demonstrates comparable seismic performance to the CIP specimen. Experimental results verified that the finite element model in this paper is adequate to predict the seismic responses of a precast column with a reinforcement-embedded socket connection. A reinforcement-embedded RC column-to-precast cap beam with socket connection can be an effective solution for construction in medium and high seismic areas. [ABSTRACT FROM AUTHOR]

The paper is related to a research project focused on tools for an evaluation and preservation of the historical value and function of arch and vaulted road bridges. It deals with the beginning of use of concrete vaulted and arch bridges in the area of the Czech Republic from the first structures built at the end of the 19th century up to the time just before the WWII. The paper includes examples of built structures as well as a general summary and development of the used technical solutions. Important part of the paper is a proposal of criterions for evaluation of their structural and historical value. [ABSTRACT FROM AUTHOR]

The structural development in bridge engineering along with efficiency have got much attention in few decades. Leading to the development, Optimization of structure established on mathematical analysis emerged mostly employed strategies for productive and sustainable design in the bridge engineering. Despite the widespread knowledge, there has yet to be a rigorous examination of recent structural optimization exploration development. Thus, the primary objectives of this paper are to critically review previous structural optimization research, provide a detailed examination of optimization goals and outline recent research field limitations and provide guidelines for future research proposal in the field of bridge engineering structural optimization. This article begins by outlining the relevance of efficiency and sustainability in the bridge construction, aswell as the work done required for this review. Suitable papers are gathered and followed by a statistical analysis of the selected publications. Following that, the selected papers are evaluated in terms of the optimization targets as well as their spatial patterns. Structure's optimization four key steps, includingmodeling, optimization techniques, formulation of optimizationconcernsandcomputational tools, are also researchedandexaminedindepth. Finally, researchgaps in contemporary works are identified, as well as suggested guidance for future works. [ABSTRACT FROM AUTHOR]

The complexity of the wharf components and the harshness of the offshore construction environment increase the safety risk of hazards, which has highlighted the importance and urgency of safety risk management in high-pile wharf constructions. This paper established a visualized digital construction safety risk model for high-pile wharf based on a so-called FAHP method (the combination of fuzzy comprehensive evaluation (FCE) and analytic hierarchy process (AHP) methods). The construction safety risk indicators were constructed as the target layer, the principle layer and the scheme layer, and then the corresponding safety risk assessment algorithm was established. The physical, functional and safety risk assessment parameters of the component in the BIM model were employed to the safety risk assessment algorithm, and the risk assessment level of each sub-process was subsequently classified. The case study indicated that the high-pile wharf construction project included five elements in principle layer and 15 risk indicators in the scheme layer. Moreover, it was demonstrated that the sub-processes with the highest construction risk level were steel pipe pile sinking in wharf construction and steel pipe pile, steel sheath-immersed pile sinking and embedded rock pile construction in approaches to bridge construction with a risk level of III. In this way, the quantitative visualization of the construction safety risk was effectively realized, which facilitates the safety risk management of construction sites and timely warning and response to unexpected safety accidents. [ABSTRACT FROM AUTHOR]

Automatic modal identification via automatically interpreting the stabilization diagram provides key technique in bridge structural health monitoring. This paper reviews the progress in the area of automatic modal identification based on interpreting the stabilization diagram. The whole identification process is divided into four steps from establishing the stabilization diagram to removing the outliers in the identification results. The criteria and algorithms used in each step in the existing studies are carefully summarized and classified. Comparisons between typical methods in cleaning and interpreting the stabilization diagram are also conducted. Real structure benchmarks used in the existing studies to validate the proposed automatic modal identification methods are also summarized. Based on the review and comparison, the specific ratio method for cleaning the stabilization diagram, the hierarchical clustering method for interpreting the stabilization diagram and the adjusted boxplot for removing the outliers in the identification results are the most suitable methods for each step. The key point of automatic modal identification based on interpreting the stabilization diagram has also discussed, and it is recommended to pay more attention to cleaning the stabilization diagram. Future study about automatic modal identification under situation with very few sensors deployed should be more concerned. This review aims to help researchers and practitioners in implementing existing automatic modal identification algorithms effectively and developing more suitable and practical methods for civil engineering structures in the future. [ABSTRACT FROM AUTHOR]

Long precast, prestressed concrete girders are becoming popular in bridge construction. Several states have constructed bridges using slender I-girders that exceeded 200 ft (61 m) in length. When such a girder is seated on flexible supports such as a jeep and dolly, it can roll about an axis located beneath its center of mass. This movement induces lateral bending, which raises concerns about the lateral stability of particularly long girders. While the stability of these girders is largely influenced by the hauling equipment, very few state transportation agencies offer guidelines addressing the rotational stiffness of transport vehicles and other critical parameters. This paper presents comprehensive field measurements of rotational stiffness from various precast concrete plants. It covers two methods--namely, the placement of eccentric loads and the parking of vehicles on a substantial cross slope--to gauge rotational stiffness. The measurements included a variety of transport vehicles with air and leaf suspensions. The examined vehicles displayed a rotational stiffness ranging from 22,000 to 42,000 kip-in. (2486 to 4745 kN-m) per radian. The paper also suggests a guideline for tilt measurements to gather essential data and pinpoint the rotational stiffness. [ABSTRACT FROM AUTHOR]

This research delves into the intricate dynamics of landslides, emphasizing their consequences on transportation infrastructure, specifically highways and roadway bridges in North Carolina. Based on a prior investigation of bridges in Puerto Rico after Hurricane Maria, we found that bridges above water and situated in valleys can be exposed to both landslide and flooding risks. These bridges faced heightened vulnerability to combined landslides and flooding events due to their low depth on the water surface and the potential for raised flood heights due to upstream landslides. Leveraging a dataset spanning more than a century and inclusive of landslide and bridge information, we employed logistic regression (LR) and random forest (RF) models to predict landslide susceptibility in North Carolina. The study considered conditioning factors such as elevation, aspect, slope, rainfall, distance to faults, and distance to rivers, yielding LR and RF models with accuracy rates of 76.3% and 82.7%, respectively. To establish that a bridge's location is at the bottom of a valley, data including landform, slope, and elevation difference near the bridge location were combined to delineate a bridge in a valley. The difference between bridge height and the lowest river elevation is established as an assumed flooding potential (AFP), which is then used to quantify the flooding risk. Compared to traditional flood risk values, the AFP, reported in elevation differences, is more straightforward and helps bridge engineers visualize the flood risk to a bridge. Specifically, a bridge (NCDOT ID: 740002) is found susceptible to both landslide (92%) and flooding (AFT of 6.61 m) risks and has been validated by field investigation, which is currently being retrofitted by North Carolina DOT with slope reinforcements (soil nailing and grouting). This paper is the first report evaluating the multi-hazard issue of bridges in valleys. The resulting high-fidelity risk map for North Carolina can help bridge engineers in proactive maintenance planning. Future endeavors will extend the analysis to incorporate actual flooding risk susceptibility analysis, thus enhancing our understanding of multi-hazard impacts and guiding resilient mitigation strategies for transportation infrastructure. [ABSTRACT FROM AUTHOR]

Vibration measurement is one of the most widely used methods for tension evaluation and condition assessment of stay cables in cable-stayed bridges. In the existing practice, the tension force of a cable is identified from the measured modal frequencies with the use of the taut string theory or empirical formulae, by assuming pre-determined structural parameters (geometric and material parameters) and boundary conditions of the cable. As a result, an inaccurate estimation of the cable tension may be obtained when there is an error in the pre-determined structural parameters and boundary conditions. Moreover, the commonly used empirical formulae are not applicable in the case when the cable is intermediately attached with dampers. In the present study, a method enabling simultaneous identification of cable tension and other structural parameters from the measured modal frequencies is developed. A precise finite element model (FEM) accounting for cable flexural rigidity, sag-extensibility, spatial variability of dynamic tension, boundary conditions, lumped masses and intermediate supports and/or dampers is first formulated as the reference model in parameter identification so that the modeling error is minimized. Then the measured multiple modal frequencies are used together with the FEM to figure out a nonlinear least-square optimization scheme which helps eliminate measurement error and allows for simultaneous identification of the cable tension and other structural parameters. Application of the proposed method to the Dongting Lake Bridge cables from in-situ ambient vibration measurements illustrates high identification accuracy and fidelity of the proposed method. [ABSTRACT FROM AUTHOR]

(1) In recent years, with China's increasing investment in the transportation industry, the construction of highways and bridges has flourished, bringing great convenience to people's lives. At the same time, there are many uncertain factors in the process of bridge construction, being prone to construction risks. In order to meet the requirements of sustainable development, it is necessary to accurately evaluate the safety risk level of bridge construction. Therefore, it is necessary to establish a new scientific safety risk evaluation system for highway bridge construction. (2) Methods. Based on the relevant standards and specifications, this paper establishes a highway bridge construction safety risk evaluation index system, and then uses the cloud entropy weight method to objectively weight each risk index, using cloud model theory to conduct a risk assessment, and through the cloud model images directly determine the overall risk level of bridge construction, and the level of risk indicators. (3) Results. Applying this method to the construction safety risk assessment of a particular bridge, the overall construction risk level of the bridge is obtained as "level 4", and the risk levels of the four first-level indicators are also all "level 4". (4) Conclusions. The cloud entropy weight method proposed in this paper and the traditional AHP-Extenics method are applied to a bridge construction safety risk evaluation, and the evaluation results obtained are consistent. However, this paper uses the cloud model to improve the entropy weight method in order to calculate the weights, which fully reflects the objectivity of the assignment. The cloud model is used for evaluation, and the risk level of indicators can be determined visually with images. [ABSTRACT FROM AUTHOR]

Featured Application: This study is aimed at sensitivity of seismic fragility demand parameters caused by structural uncertainty of high-speed railway extradosed cable-stayed bridge considering the Yuanjiang extra-large bridge on Huaihua–Shangyang–Hengyang Railway in China. Based on the probability distribution and correlation of random parameters, a sampling analysis method is proposed herein. Furthermore, a dynamic 3D finite element model of the employed bridge is established by using OpenSEES nonlinear software with full consideration of the randomness of structural parameters using sampling analysis. Based on these findings, some important conclusions were drawn. We believe that our study makes a significant contribution to the literature because although existing studies have focused on static parameter sensitivity analyses and have provided evidence for the design and construction control of cable-stayed bridges, the dynamic sensitivity studies especially for the structural parameter uncertainty of high-speed railway extradosed cable-stayed bridges have not been extensively studied. Further, we believe that this paper will be of interest to the readership of your journal because our analysis employs innovative research techniques, and our findings have the potential to provide guidance for the seismic fragility analysis of high-speed railway extradosed cable-stayed bridges. This manuscript has not been published or presented elsewhere in part or in entirety and is not under consideration by another journal. We have read and understood your journal's policies, and we believe that neither the manuscript nor the study violates any of these. There are no conflicts of interest to declare. It is known that the extradosed cable-stayed bridge, a hybrid bridge, possesses the virtues of both classic cable-stayed bridges and girder bridges in mechanical behaviors. In this paper, the sensitivity of seismic fragility demand parameters (SFDP) of a high-speed railway extradosed cable-stayed bridge is studied systematically along with the consideration of structural parameter uncertainty. Based on the probability distribution and correlation of random parameters, the Latin hypercube sampling method is adopted herein. The dynamic 3D finite element model of the employed bridge is established by using powerful and attractive OpenSEES nonlinear software. A nonlinear incremental dynamic analysis is performed to consider the randomness of structural parameters using sampling analysis. Some important conclusions are drawn indicating that the structural design parameter uncertainty predominantly has influence on the SFDP for fragility analysis of bridge structures. The design parameters of extradosed cable-stayed bridges are categorized and identified as primary, secondary and insensitive parameters. The high sensitivity parameters of extradosed cable-stayed bridges for fragility analysis include friction coefficient of bearing, concrete bulk density, damping ratio, peak compressive strength of confined concrete, component size and peak strain of confined concrete. Additionally, the strength and strain of unconfined concrete cannot be ignored. Furthermore, the uncertainty of structural design parameters fails to be responsible for the cable force responses due to larger girder stiffness. The structural design parameter uncertainty has a significant influence on the responses of extradosed cable-stayed bridges for seismic fragility analysis. [ABSTRACT FROM AUTHOR]

In the 1950s and 1960s, some Louisiana's bridges were constructed using steel twin-girder or truss systems, in which floorbeams are carried by the main members and continuous (spliced) stringers are supported by the floorbeams. The main members are either two-edge (fascia) girders or trusses. One of the byproducts of this type of design is that stringer bottom flanges are in compression in the negative moment region over the floorbeams, which could result in lateral torsional buckling (LTB) should inadequate lateral bracing be provided. When the continuous stringers are load-rated using AASHTOWare Bridge Rating analysis software (BrR 7.1), their LTB resistance is calculated in accordance with American Association of State Highway Officials (AASHTO) LRFD Bridge Design Specifications, which do not account for potential bracing provided by a noncomposite deck and could underestimate flexural strength. As a result, the rating may be low enough to require restrictive load posting or even bridge closure. This paper summarizes extensive experimental and numerical studies investigating the behavior of this type of floor system by testing two-span, continuous, steel stringers in a grillage that included three stringer lines, an interior transverse support (floorbeam), and transverse diaphragms at the end supports. The tests and finite-element analysis studies encompassed a variety of unbraced lengths and support conditions with steel diaphragms or timber ties acting as bracing members. The findings demonstrated that, for the systems examined, minimal bracing could substantially enhance LTB resistance and supported the use of higher flexural strengths than those currently predicted using AASHTO Specifications. This paper illustrates the use, challenges, and successes in LTB modeling beams with various support and bracing conditions. The most flexible cases were the most difficult to achieve close agreement with experimental results. [ABSTRACT FROM AUTHOR]

The article reports on the launching of white paper by LifeSpan Technologies that identifies a four-step process for fixing the national bridge problem in the U.S. The new white paper describes a process that would allow repairs and replacement bridge projects based on risk priorities and precise engineering data. According to LifeSpan, the advanced condition assessment technologies are the most effective means for bridge owners to gather information.

The article reports that on October 25, 2005, outgoing Institution of Civil Engineers' president Colin Clinton presented awards to papers published in Bridge Engineering in 2004. The Overseas Prize, presented for the best paper on an overseas project, was awarded to K. Ahmadi-Kashani for his paper "Seismic design of Egnatia Motorway bridges, Greece. The John Henry Garrood King Medal, presented for the best paper on bridges, was awarded to D.A. Smith and C. R. Hendy for their paper "Design of the New Medway Bridge, England."

Featured Application: This paper will provide a theoretical basis for the selection of spherical hinge lubrication materials for rotary bridges and promote the research and development of lubricants for rotary bridges under special conditions. The spherical hinge is an important part of rotating bridge construction, but over a long period of time, spherical hinge self-lubricating coating is easily eroded by water vapor. In this paper, the tribological properties and seasonal freezing damage evolution characteristics of a variety of rotating spherical hinge self-lubricating coating materials were studied by means of friction coefficient measurement experiments, friction and wear experiments and shear rheological experiments based on a self-developed indoor spherical hinge rotational friction coefficient tester. The results show that the self-developed indoor spherical hinge rotational friction coefficient tester can effectively and truly represent the working state and tribological properties of self-lubricating coating in practical engineering. A seasonal freezing environment has obvious influence on the tribological properties of spherical hinge self-lubricating coating, which is an irreversible process of deterioration. With the increase in the freezing–thawing cycle, the friction coefficient and viscosity of self-lubricating coating materials increase gradually, and the thixotropy and elastic recovery become worse and worse. When the content of graphene is 0.1%, the performance is the best. At room temperature and in a freeze–thaw environment, the friction coefficient of graphene grease is lower than that of PTFE 0.007 and 0.008, respectively. The diameter of the grinding plate is less than 0.075 mm and 0.001 mm, respectively. The maximum bite load without card is higher than 8.1% and 11.5%. The area of the thixotropic ring is lower than 41% and 42%. Phase transition points were higher than 42% and 64%. The apparent viscosity was higher than 6.6% and 74%. Graphene greases show the greatest bearing capacity, thixotropy and structural strength in conventional and seasonal freezing conditions and exhibit excellent tribological properties. [ABSTRACT FROM AUTHOR]