Search

Abstract: Silica nanoparticles of diameter, 24–75nm and surface area, 875m2/g were synthesized using aero-gel route. Thereafter, nanoparticles were impregnated with reactive chemicals, and used as reactive adsorbent to study the removal of toxic nerve and blister chemical warfare agents and their simulants from solutions. Trichloroisocyanuric acid impregnated silica nanoparticles showed the best performance and indicated physisorption followed by chemisorption/degradation of toxicants. This indicated their suitability as universal decontaminant for nerve and blister agents. This system showed a decrease in t 1/2 from 1210 to 2.8min for the removal of king of chemical warfare agents, i.e., sulphur mustard. Hydrolysis, dehydrohalogenation and oxidation reactions were found to be the route of degradation of toxicants over impregnated silica nanoparticles. [Copyright &y& Elsevier]

Abstract: An efficient methodology employing copper nanoparticles for the preparation of 2-naphthol condensed 1,3-oxazinone derivatives employing one-pot condensation reaction in the presence of K2CO3 and copper nanoparticles in PEG-400 is described which offers several advantages, viz. high yields, clean reaction, short reaction times, recyclability of the catalyst and simple workup procedure. PEG-400 was found to be the best solvent out of a range of solvents examined for this scheme. Moreover, PEG could stabilize the nanoparticles from oxidation and thus could increase the catalyst efficiency by escalating the TON (Turn over Number) and TOF (Turn over Frequency) of the catalyst, making the protocol greener, eco-friendly and environmentally benign. [Copyright &y& Elsevier]

Abstract: Alumina nanoparticles in the size range of 2–30nm and surface area 375m2/g were synthesized using aerogel route and then characterized using N2–BET, SEM, TEM, XRD, FTIR and TGA techniques. Thereafter, these were impregnated with reactive chemicals and tested for their potential by conducting studies on kinetics of adsorption of 2-chloroethylethylsulphide (2-CEES) under static conditions. Kinetics was studied using linear driving force and Fickian diffusion model. The kinetics parameters such as equilibration constant, equilibration capacity, diffusional exponent and adsorbate–adsorbent interaction constant were also determined. AP-Al2O3 with 10% impregnation of MoVPA (V3) and NaOH showed the maximum (574mg/g) and minimum (88mg/g) uptake of 2-CEES among impregnated systems respectively. All impregnated systems except NaOH impregnation showed the values of diffusional exponent to be <0.5, indicated the diffusion mechanism to be Fickian, whereas AP-Al2O3 with and without NaOH impregnation showed the diffusional mechanism to be anomalous. Hydrolysis and dehydrohalogenation reactions (identified using GC/MS technique) were found to be the route of degradation of 2-CEES. [Copyright &y& Elsevier]

An efficient method for the preparation of 1,3-dithiolanes of aliphatic and both activated and deactivated aromatic carbonyl compounds with 1,2-ethanedithiol in the presence of a catalytic amount of inexpensive, easily recyclable, monodispersed, chemoselective Ni-nanoparticles having high TON and TOF is reported. An efficient method for the chemoselective thioacetalization of ketones in the presence of aldehydes using Ni-nanoparticles is also reported in this article. Our reaction is kinetically controlled and the method is relatively expedient, avoids the use of cost-prohibitive reagents, high temperatures and leads to excellent yield. Selective Protection of Carbonyl Compounds Over Nano-sized Nickel Catalysts Ajeet Kumar,a Santosh Kumar,a Amit Saxena,a Arnab De,b Subho Mozumdara* aDepartment of Chemistry, University of Delhi, Delhi, 110007, India; b Department of Chemistry, Indiana University, Bloomington, USA; subhoscom@yahoo.co.in An efficient method for the preparation of 1,3-dithiolanes of aliphatic and both activated and deactivated aromatic carbonyl compounds with 1,2-ethanedithiol in the presence of a catalytic amount of inexpensive, easily recyclable, monodispersed, chemoselective Ni-nanoparticles having high TON and TOF is reported. We report an efficient method for the chemoselective thioacetalization of ketones in the presence of aldehydes using Ni-nanoparticles. Our reaction is kinetically controlled and the method is relatively expedient, avoids the use of cost-prohibitive reagents, high temperatures and leads to excellent yield. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Abstract: Aldehydes and mercaptoacetic acid are coupled in the presence of a catalytic amount of economical and non-toxic molecular iodine in [bmim][BF4] ionic liquid under mild conditions to afford the corresponding 1,3-oxathiolan-5-one in excellent yields. Molecular iodine acts faster in ionic liquids when compared to conventional solvents such as DMSO, DMF, ethyl acetate, and acetonitrile. The recovered ionic liquids can be recycled in subsequent reactions with consistent activity. [Copyright &y& Elsevier]