Search

With characters of low cost, portability, easy disposal, and high accuracy, as well as bulky reduced laboratory equipment, paper-based sensors are getting increasing attention for reliable indoor/outdoor onsite detection with nonexpert operation. They have become powerful analysis tools in trace detection with ultra-low detection limits and extremely high accuracy, resulting in their great popularity in medical detection, environmental inspection, and other applications. Herein, we summarize and generalize the recently reported paper-based sensors based on their application for mechanics, biomolecules, food safety, and environmental inspection. Based on the biological, physical, and chemical analytes-sensitive electrical or optical signals, extensive detections of a large number of factors such as humidity, pressure, nucleic acid, protein, sugar, biomarkers, metal ions, and organic/inorganic chemical substances have been reported via paper-based sensors. Challenges faced by the current paper-based sensors from the fundamental problems and practical applications are subsequently analyzed; thus, the future directions of paper-based sensors are specified for their rapid handheld testing.

In this study, we describe a monolithic and fully integrated paper-based device for the simultaneous detection of three prognostic biomarkers in saliva. The pattern of the proposed multiplexed device is designed with a central sample deposition zone and three identical arms, each containing a pre-treatment and test zone. Its one-step fabrication is realized by CO2 laser cutting, providing remarkable parallelization and rapidity (ca. 5 s/device). The colorimetric detection is based on the sensitive and selective target-induced reshaping of plasmonic multibranched gold nanoparticles, which exhibit a clear spectral shift (and blue-to-pink color change) in case of non-physiological concentrations of the three salivary biomarkers. A rapid and multiplexed naked-eye or smartphone-based readout of the colorimetric response is achieved within 10 min. A prototype kit for POCT testing is also reported, providing robustness and easy handling of the device.

Each year, a large amount of waste paper (WP) is generated in Japan, and due to the change in lifestyle with the COVID-19 pandemic, the WP collection and recycling system in Japan faces new challenges. Although the government of Japan has installed WP collection systems, the efficiency of these traditional WP collection systems is too low, and this causes inconvenience to the governments, residents, and other stakeholders. On the other hand, some recycling companies in Japan are trying to establish a nontraditional WP collection system by setting their own WP collection stations in cooperative supermarkets. Yet, the efficiency of this new system has not been clarified. This research aims to investigate the current status, operational characteristics, and the role of recycling companies’ WP collection stations in the Japanese WP collection system. By performing trade area analysis and stepwise OLS regression, this research will evaluate WP collection stations’ efficiency. Moreover, this research will also discuss how the new WP collection system improves WP collection efficiency and residents’ convenience. The results show that WP collection stations efficiency is particularly high in large supermarkets with many parking spaces and long business hours, as well as in areas with many families with children. Recycling companies’ WP collection system could create a system, which can satisfy resident, government, and recycling company interests at the same time.

The development of diagnostic tools for measuring a wide spectrum of target analytes, from biomarkers to other biochemical parameters in biological fluids, has experienced a significant growth in the last decades, with a good number of such tools entering the market. Recently, a clear focus has been put on miniaturized wearable devices, which offer powerful capabilities for real-time and continuous analysis of biofluids, mainly sweat, and can be used in athletics, consumer wellness, military, and healthcare applications. Sweat is an attractive biofluid in which different biomarkers could be noninvasively measured to provide rapid information about the physical state of an individual. Wearable devices reported so far often provide discrete (single) measurements of the target analytes, most of them in the form of a yes/no qualitative response. However, quantitative biomarker analysis over certain periods of time is highly demanded for many applications such as the practice of sports or the precise control of the patient status in hospital settings. For this, a feasible combination of fluidic elements and sensor architectures has been sought. In this regard, this paper shows a concise overview of analytical tools based on the use of capillary-driven fluidics taking place on paper or fabric devices integrated with solid-state sensors fabricated by thick film technologies. The main advantages and limitations of the current technologies are pointed out together with the progress towards the development of functional devices. Those approaches reported in the last decade are examined in detail.

The fabrication of low-cost, flexible, and recyclable electronic devices has been the focus of many research groups, particularly for integration in wearable technology and the Internet of Things (IoT). In this work, porous zinc oxide (ZnO) nanostructures are incorporated as a UV sensing material into the composition of a sustainable water-based screen-printable ink composed of car-boxymethyl cellulose (CMC). The formulated ink is used to fabricate flexible and foldable UV sensors on ubiquitous office paper. The screen-printed CMC/ZnO UV sensors operate under low voltage (≤2 V) and reveal a stable response over several on/off cycles of UV light exposure. The devices reach a response current of 1.34 ± 0.15 mA and a rise and fall time of 8.2 ± 1.0 and 22.0 ± 2.3 s, respectively. The responsivity of the sensor is 432 ± 48 mA W−1, which is the highest value reported in the literature for ZnO-based UV sensors on paper substrates. The UV-responsive devices display impressive mechanical endurance under folding, showing a decrease in responsivity of only 21% after being folded 1000 times. Their low-voltage operation and extreme folding stability indicate a bright future for low-cost and sustainable flexible electronics, showing potential for low-power wearable applications and smart packaging. publishersversion published

Paper waste in the mockups design with regular, irregular, and amorphous patterns is a critical problem in digital printing presses. Paper waste reduction directly impacts production costs, generating business and environmental benefits. This problem can be mapped to the two-dimensional irregular bin-packing problem. In this paper, an iterated local search algorithm using a novel neighborhood structure to detect overlaps between amorphous shapes is introduced. This algorithm is used to solve the paper waste problem, modeled as one 2D irregular bin-packing problem. The experimental results show that this approach works efficiently and effectively to detect and correct the overlaps between regular, irregular, and amorphous figures.

Despite the potential in fabrication of microfluidic paper-based analytical devices (μPADs) for point-of-care testing (POCT) kits, the development of simple, accurate, and rapid devices with higher sensitivity remains challenging. Here, we report a novel method for 3D-μPAD fabrication with enclosed channels using vat photopolymerization to avoid fluid evaporation. In detail, height of the enclosed channels was adjusted from 0.3 to 0.17 mm by varying the UV exposure time from 1 to 4 s for the top barrier, whereas the exposure time for the bottom and side barriers was fixed. As a result, sample flow in the enclosed channels of 3D-μPADs showed lesser wicking speed with very scant evaporation compared to that in the hemi channels in the 3D-μPADs. The stoppage of evaporation in the enclosed channels significantly improved the gray intensity and uniformity in the detection zone of the 3D-μPADs, resulting in as low as 0.3 mM glucose detection. Thus 3D-μPADs with enclosed channels showed enhanced sensitivity compared to the 3D-μPADs with hemi channels when dealing with a small volume sample. Our work provides a new insight into 3D-μPAD design with enclosed channels, which redefines the methodology in 3D printing.

The disruptive force of the COVID-19 pandemic is lessening in power and plans are being made for the postcrisis period, among which increasing the sustainability of higher education is of significant importance. The study aims at establishing students’ existing environment-related routines during their home confinement, as a basis for applying green measures to campus living once academic life is resumed with the physical presence of students. The collected data rely on self-reported information provided by 816 students from Politehnica University of Timisoara (Romania), collected via an online, anonymous survey. The novelty of the approach is that household environment-related routines are investigated during a crisis period, with the possibility to build upon the results to implement tailored measures to encourage or diminish environmentally relevant consumption by young, highly skilled individuals. The students display a moderate awareness of environmental issues and indicate consumption routines that may be steered towards an increased sustainability-conscious campus life, through the combined intervention of the university, city administration, and stakeholder involvement. The findings are used to explore the possible directions for action towards increasing or contributing to the territorial sustainability in the socio-ecological context of Timisoara, the largest university city in the western part of Romania via educational, managerial and policy interventions.

This editorial deals with the most cited papers published in the years 2018–2019 in the section “Polymer Theory and Simulation” of the journal Polymers. They are mainly regular research articles, but two reviews are also present in this analysis. The main topics appear related to (nano)composites, entangled polymers, ring polymers, nanotubes, polyelectrolytes, brushes and polymers at interfaces. The most used simulation methods are molecular dynamics, Brownian dynamics, and Monte Carlo, with the only exception being a paper dealing with metamaterials. The evolution of the fraction of publications falling into one of these fields over the past 50 years is visualized in Figure 1. Figure 2 shows the same data differently, so that the focus is on the qualitative rather than quantitative evolution within areas of research. In the following, and inline with the spirit of this short editorial we are going to review the most cited works in the order of their number of citations, rather than by discipline. [...]

I have the honor of writing this editorial note on the top 5 cited papers published in 2018 in the section of Biocatalysis of the Catalyst journal [...]

This is a memorial paper for Prof [...]

Attention to the environment and its problems has undergone unprecedented growth in recent years [...]

Applied Sciences has achieved a major milestone this year: it is the 10th anniversary of the journal [...]

Acoustics (ISSN 2624-599X) is an open access peer-reviewed journal published quarterly online by MDPI [...]

Recent achievements in the photoalignment technique for fabrication of optically rewritable electronic paper with high performance characteristics are surveyed with emphasis on temporal constraints on the exposure process. The possibility of creating electrode-free electronic paper has very important practical aspects. However, many existing studies do not include sufficient analysis on how to achieve acceptable reflective characteristics within short exposure time. In order to achieve this goal, we have applied the rotational diffusion model. We find that the parameters of the diffusion model can be adjusted to get acceptable light-reflecting characteristics within 10 s of exposure. In comparison with the long-time exposure, the reflectance coefficient reduces by 24%. The route to material improvements for optimized e-paper device is discussed.

The use of waste from the regional production of waste wood, waste paper, and cardboard in the form of briquettes may be causing an increase in local emissions, both of major elements and trace elements. When burning paper and cardboard briquettes, more than 70% of Mn, Zn, As, and Pb is released into the air from the total content of trace elements in the fuel. The largest amounts of major and trace elements are released when burning paper briquettes (56 g/kg of fuel), half of these amounts are released from burning briquettes from waste wood and coal (23 g/kg of fuel). The pursuit of alternative uses for those cardboard components that are not suitable for recycling cannot be directed to the production of briquettes for residential combustion in the framework of the application of the principles of the circular economy. In particular, the high concentrations of undesirable elements in the emissions released in the gas phase into the atmosphere are an obstacle existing even when the parameters of the PM10 emissions of a boiler are met. This is related to the high ash content of the cardboard (13.5%). Waste paper or cardboard could be added to waste wood at a maximum of 10% to make the pollution produced comparable to the burning of coal briquettes.

In addition to the traditional so-called Arctic states, non-Artic states and some other international organisations are now showing a growing interest in this area. China, for example, has achieved some progress, since becoming an Arctic Council permanent observer, through participation in resource development in the region and strengthening its bilateral relations with the Arctic states. The present study examines China’s Arctic policy and its implications for the governance of the Arctic Ocean. It also provides an insight into the existing relevant international legal instruments and examines China’s interest in the participation, governance, and resource protection activities in the Arctic Ocean region, to successfully implement Chinese Arctic policy. To this end, the study examines the connection between the “white paper” and “China’s Arctic Policy”, in the context of executing the “Belt and Road Initiative”, in particular the “Arctic Silk Road”. The study concludes that China intends to perform a dynamic role in governing the Arctic Ocean, as a less challenging but cooperative partner in this region.

Over the last decades, microalgal biomass has gained a significant role in the development of different high-end (nutraceuticals, colorants, food supplements, and pharmaceuticals) and low-end products (biodiesel, bioethanol, and biogas) due to its rapid growth and high carbon-fixing efficiency. Therefore, microalgae are considered a useful and sustainable resource to attain energy security while reducing our current reliance on fossil fuels. From the technologies available for obtaining biofuels using microalgae biomass, thermochemical processes (pyrolysis, Hydrothermal Liquefaction (HTL), gasification) have proven to be processed with higher viability, because they use all biomass. However, due to the complex structure of the biomass (lipids, carbohydrates, and proteins), the obtained biofuels from direct thermochemical conversion have large amounts of heteroatoms (oxygen, nitrogen, and sulfur). As a solution, catalyst-based processes have emerged as a sustainable solution for the increase in biocrude production. This paper’s objective is to present a comprehensive review of recent developments on the catalyst-mediated conversion of algal biomass. Special attention will be given to operating conditions, strains evaluated, and challenges for the optimal yield of algal-based biofuels through pyrolysis and HTL.

The usage of lignocellulosic biomass in energy production for biofuels and other value-added products can extensively decrease the carbon footprint of current and future energy sectors. However, the infrastructure in the processing of lignocellulosic biomass is not well-established as compared to the fossil fuel industry. One of the bottlenecks is the production of the lignocellulolytic enzymes. These enzymes are produced by different fungal and bacterial species for degradation of the lignocellulosic biomass into its reactive fibers, which can then be converted to biofuel. The selection of an ideal feedstock for the lignocellulolytic enzyme production is one of the most studied aspects of lignocellulolytic enzyme production. Similarly, the fermentation enhancement strategies for different fermentation variables and modes are also the focuses of researchers. The implementation of fermentation enhancement strategies such as optimization of culture parameters (pH, temperature, agitation, incubation time, etc.) and the media nutrient amendment can increase the lignocellulolytic enzyme production significantly. Therefore, this review paper summarized these strategies and feedstock characteristics required for hydrolytic enzyme production with a special focus on the characteristics of an ideal feedstock to be utilized for the production of such enzymes on industrial scales.

The fertilizer framework in the European Union has recently been reviewed by EU Regulation 1009/2019 that excluded sewage sludge from the list of the possible constituents of organic fertilizers relying on their origin, not on their quality. This paper aimed to carry out a complete characterization of sewage sludge obtained from a pharmaceutical manufacturing process (PDSS) to demonstrate that sewage sludge obtained from a standardized and controlled manufacturing process can be safely recycled as organic fertilizer. The agronomic and environmental characteristics of the PDSS product were analyzed and compared to other organic fertilizers. Its fertilizing potential was also evaluated through plant growth trials. PDSS was characterized by a high concentration of total N (6.6% w/w), which was all present in organic form. PDSS also showed a low concentration of heavy metals, an absence of pathogens and low concentrations of organic contaminants. Plant growth trials showed that the PDSS was able to improve lettuce and carrot growth (+25 and +46% of dry weight compared to the unfertilized control), as well as their physiological status. Considering all the results, the exclusion of sewage sludge relying only on its origin and not on its quality appears to conflict with the principles of the circular bioeconomy.

A digital microfluidic modular interface (chip-to-chip interface) which possesses an electrode with an orifice to vertically transport core–shell droplets is presented. The electrodes were geometrically designed to promote droplet deformation and suspension. The droplets were then applied with an electrical potential for insertion into and passage through the orifice. The concepts were tested with three types of droplets at the volume of 0.75~1.5 μL, which is usually difficult to transfer through an orifice. The integration of electrowetting on dielectric (EWOD) with paper-based microfluidics was demonstrated: the droplet could be transported within 10 s. More importantly, most of the core droplet (~97%) was extracted and passed through with only minimal shell droplets accompanying it.

The integrated production of bioethanol and biogas makes it possible to optimise the production of carriers from renewable raw materials. The installation analysed in this experimental paper was a hybrid system, in which waste from the production of bioethanol was used in a biogas plant with a capacity of 1 MWe. The main objective of this study was to determine the energy potential of biomass used for the production of bioethanol and biogas. Based on the results obtained, the conversion rate of the biomass—maize, in this case—into bioethanol was determined as the efficiency of the process of bioethanol production. A biomass conversion study was conducted for 12 months, during which both maize grains and stillage were sampled once per quarter (QU-I, QU-II, QU-III, QU-IV; QU—quarter) for testing. Between 342 L (QU-II) and 370 L (QU-I) of ethanol was obtained from the organic matter subjected to alcoholic fermentation. The mass that did not undergo conversion to bioethanol ranged from 269.04 kg to 309.50 kg, which represented 32.07% to 36.95% of the organic matter that was subjected to the process of bioethanol production. On that basis, it was concluded that only two-thirds of the organic matter was converted into bioethanol. The remaining part—post-production waste in the form of stillage—became a valuable raw material for the production of biogas, containing one-third of the biodegradable fraction. Under laboratory conditions, between 30.5 m3 (QU-I) and 35.6 m3 (QU-II) of biogas per 1 Mg of FM (FM—fresh matter) was obtained, while under operating conditions, between 29.2 m3 (QU-I) and 33.2 m3 (QU-II) of biogas was acquired from 1 Mg of FM. The Biochemical Methane Potential Correction Coefficient (BMPCC), which was calculated based on the authors’ formula, ranged from 3.2% to 7.4% in the analysed biogas installation.

Our aim was to compere diabetes-related distress (DD) in young patients with type 1 diabetes mellitus (T1DM) and in their parents before and during the national COVID-19-related lockdown when schools operated on-line. Problems Areas in Diabetes-Child (PAID-Ch), Teen (PAID-T) and Parent (P-PAID-Ch, P-PAID-T) questionnaires in paper version were used to evaluate DD before COVID-19 pandemic (November 2019–February 2020) and during the lockdown (April 2020) the same surveys were performed by phone. We enrolled 76 patients (median age (Q1–Q3): 13.6 (11.8–15.2) years, 21 children, 55 adolescents, T1DM duration 3.7 (1.7–6.8) years). Initial PAID score was lower in teenage boys than in girls (34.0 (24.0–42.0) vs. 44.5 (40.0–50.5), p = 0.003). In teens PAID score decreased significantly during the lockdown (−3.0 (−11.0–3.0), p = 0.018), more in girls than boys (p = 0.028). In children (−3.0 (−14.0–7.0), p = 0.131) and parents PAID did not change (teens’ parents: 3.0 (−9.0–10.0), p = 0.376, children’s parents: −5.0 [−9.0–1.0], p = 0.227). In the studied group COVID-19 pandemic-related lockdown was associated with decrease in DD in teens with T1DM, particularly in girls, while no significant change in DD was observed in children or parents. DD decrease in teens during the pandemic should attract attention to the potential “rebound” of DD related to return to regular on-site school routine.

The potential of agroforestry to improve livelihoods and mitigate climate change and environmental degradation has been widely recognized, especially within the context of climate-smart agriculture. However, agroforestry opportunities have not been fully exploited because of several reasons, among which are adverse policies and legislations. However, many countries do not have a full understanding of how their policy and institutional environment may affect agroforestry development. We aim to fill this gap by looking at the particular case of Chad. The method used included examining data from: (i) literature reviews of important national and international polices, strategies, and legislation governing access to land and trees, among which are ‘La Loi 14’, Chad’s 2010 poverty reduction strategy paper, draft zero of the National Environmental Policy, (ii) interviews and focus group discussions with NGOs, government officials, and farmers, and (iii) surveys with 100 households. Results show that Chad has no specific agroforestry policy but opportunities for agroforestry can be found in some of the above-mentioned policy documents and government strategies. Most stakeholders interviewed had positive attitudes towards agroforestry, but uptake of the practice is handicapped by poor understanding of the forestry law by farmers and forestry officials. Gaps in existing laws give room for rent-seekers to collect individual (USD 272–909) and collective (USD 36–1818) access fees to trees on both forest and farmland. We propose that the government of Chad should unmask elements of agroforestry in existing policies and policy instruments to demonstrate its importance in responding to livelihood and environmental challenges in the country.

The aim of the study was to assess leaching of Cl−, SO42−, and PO43− from ashes formed in household furnaces. The ashes were obtained following the combustion of conventional fuels, namely wood and hard coal, and alternative fuels with various fractions of municipal waste in a household boiler. Aqueous leachates of the ashes were used to determine concentrations of chlorides by titration (Mohr’s method) (21.3–3049.6 mg/dm3), sulphates by the gravimetric method (12.2–244.1 mg/dm3), and phosphates by spectrophotometry (0.01–67.2 mg/dm3). It was found that co-combustion of municipal waste with plastic-coated paper cartons, diapers, or a mixed waste fraction leaves the greatest amount of ashes on the furnace grate. The highest amounts of Cl−, SO42−, and PO43− were leached from ashes generated from burning a mix of wood and coals, or wood alone (different species). The addition of municipal waste to the process of burning the conventional and alternative fuels studied did not significantly increase Cl−, SO42−, and PO43− content in aqueous extracts of ashes, the exception being diapers and plywood. In light of the study results, it was concluded that all the ashes could be reused (as an additive to concrete) except for the ash generated from the combustion of a mixed municipal waste fraction and coal (due to the content of Cl−) and diapers (due to the content of PO43−). It was demonstrated that Cl−, SO42−, and PO43− content in the entire set of samples and in individual ash groups is highly heterogeneous and variable.

Cattle biomass (CB or manure from cattle) is proposed as reburn fuel under slightly fuel-rich conditions. The CB includes wastes from cattle feedlots (cattle grown in feedlots to slaughter weights of 450–640 kg) termed as Feedlot Biomass (FB) and cattle wastes from dairy farms termed as Dairy Biomass (DB). NOx emissions from coal-fired power plants can be reduced by using pure CB and Coal:CB mixtures as reburn fuels (10~30% by heat) injected after the primary combustion region. Experiments with Coal:CB mixtures as reburn fuels were performed using the 30 kW burner facility. Part I deals with results from experiments using pure FB and Coal:FB blends as reburn fuels while Part II presents results on extent of NOx reduction using pure DB and Coal:DB blends as reburn fuels (RF). In the current work, results on NOx emission are presented with FB and Coal:FB blends as RF. The parametric studies include: equivalence ratio in reburn zone (ERRBZ), vitiated air, angle of reburn nozzles, presence and absence of heat exchangers (HEXs), and baseline NOx concentration. The optimum operating conditions for FB reburning were found to be conditions with vitiation at ERRBZ = 1.1 with 45° upward counter-current injection in the presence of HEXs. NOx emissions were reduced by as much as 96%.

This work addresses the joint management of residual microalgae and pine wood waste through pyrolysis to obtain a solid product for its use as soil amendment and two other by-products (liquid and gaseous) that can be used for energy purposes. Two management routes have been followed. The first route is through the co-pyrolysis of mixtures of both residual materials in several proportions and the later use of their solid fraction for soil amendment. The second route is the pyrolysis of pine wood waste and its direct combination with dried residual microalgae, also using it as soil amendment. The solid fraction assessment shows that from seven solid products (biochar) three stand out for their positive applicability in agriculture as soil amendment. In addition, they also present the benefit of serving as carbon sink, giving a negative balance of CO2 emissions. However, caution is suggested due to biochar applicability being subject to soil characteristics. To ensure the sustainability of the overall process, the energy available in liquid and gaseous fractions has been assessed for covering the drying needs of the residual microalgae in both cases. These results suggest that the pyrolysis process is a sustainable way to manage specific evaluated residues and their products.

Environmental concern for our planet has changed significantly over time due to climate change, caused by an increasing population and the subsequent demand for electricity, and thus increased power generation. Considering that natural gas is regarded as a promising fuel for such a purpose, the need to integrate carbon capture technologies in such plants is becoming a necessity, if gas power plants are to be aligned with the reduction of CO2 in the atmosphere, through understanding the capturing efficacy of different absorbents under different operating conditions. Therefore, this study provided for the first time the comparison of available absorbents in relation to amine solvents (MEA, DEA, and DEA) CO2 removal efficiency, cost, and recirculation rate to achieve Climate change action through caron capture without causing absorbent disintegration. The study analyzed Flue under different amine-based solvent solutions (monoethanolamine (MEA), diethanolamine (DEA), and methyldiethanolamine (MDEA)), in order to compare their potential for CO2 reduction under different operating conditions and costs. This was simulated using ProMax 5.0 software modeled as a simple absorber tower to absorb CO2 from flue gas. Furthermore, MEA, DEA, and MDEA adsorbents were used with a temperature of 38 &deg, C and their concentration varied from 10 to 15%. Circulation rates of 200&ndash, 300 m3/h were used for each concentration and solvent. The findings deduced that MEA is a promising solvent compared to DEA and MDEA in terms of the highest CO2 captured, however, it is limited at the top outlet for clean flue gas, which contained 3.6295% of CO2 and less than half a percent of DEA and MDEA, but this can be addressed either by increasing the concentration to 15% or increasing the MEA circulation rate to 300 m3/h.

Milk is a necessity for human life. However, it is susceptible to contamination and adulteration. Microfluidic analysis devices have attracted significant attention for the high-throughput quality inspection and contaminant analysis of milk samples in recent years. This review describes the major proposals presented in the literature for the pretreatment, contaminant detection, and quality inspection of milk samples using microfluidic lab-on-a-chip and lab-on-paper platforms in the past five years. The review focuses on the sample separation, sample extraction, and sample preconcentration/amplification steps of the pretreatment process and the determination of aflatoxins, antibiotics, drugs, melamine, and foodborne pathogens in the detection process. Recent proposals for the general quality inspection of milk samples, including the viscosity and presence of adulteration, are also discussed. The review concludes with a brief perspective on the challenges facing the future development of microfluidic devices for the analysis of milk samples in the coming years.

Technologies for the isolation of lignin from pulping process streams are reviewed in this article. Based on published data, the WestVaco process, the LignoBoost process, the LigoForce SystemTM and the SLRP process are reviewed and discussed for the isolation of lignin from Kraft black liquor. The three new processes that have now joined the WestVaco process are compared from the perspective of product quality. Further, isolation processes of lignosulfonates from spent sulfite liquor are reviewed. The limitation for this review is that data are only available from lab scale and pilot scale experiments and not from industrial processes. Key output of this paper is a technology summary of the state of the art processes for technical lignins, showing the pros and cons of each process.

In competitive athletes, the differential diagnosis between nonpathological changes in cardiac morphology associated with training (commonly referred to as “athlete’s heart”) and certain cardiac diseases with the potential for sudden death is an important and not uncommon clinical problem. The use of noninvasive, fast, and cheap analytical techniques can help in making diagnostic differentiation and planning subsequent clinical strategies. Recent studies have demonstrated the role of gut microbiota and their metabolites in the onset and the development of cardiovascular diseases. Trimethylamine (TMA), a gut bacteria metabolite consisting of carnitine and choline, has recently emerged as a potentially toxic molecule to the circulatory system. The present work aims to develop a simple and cost-effective capillary electrophoresis-based method for the determination of TMA in biological samples. Analytical characteristics of the proposed method were evaluated through the study of its linearity (R2 > 0.9950) and the limit of detection and quantification (LOD = 1.2 µg/mL; LOQ = 3.6 µg/mL). The method shows great potential in high-throughput screening applications for TMA analysis in biological samples as a novel potential biomarker of cardiovascular diseases. The proposed electrophoretic method for the determination of TMA in biological samples from patients with cardiac disease is now in progress.

Fossil fuels are a major contributor to climate change, and as the demand for energy production increases, alternative sources (e.g., renewables) are becoming more attractive. Biofuels such as bioethanol reduce reliance on fossil fuels and can be compatible with the existing fleet of internal combustion engines. Incorporation of biofuels can reduce internal combustion engine (ICE) fleet carbon dioxide emissions. Bioethanol is typically produced via microbial fermentation of fermentable sugars, such as glucose, to ethanol. Traditional feedstocks (e.g., first-generation feedstock) include cereal grains, sugar cane, and sugar beets. However, due to concerns regarding food sustainability, lignocellulosic (second-generation) and algal biomass (third-generation) feedstocks have been investigated. Ethanol yield from fermentation is dependent on a multitude of factors. This review compares bioethanol production from a range of feedstocks, and elaborates on available technologies, including fermentation practices. The importance of maintaining nutrient homeostasis of yeast is also examined. The purpose of this review is to provide industrial producers and policy makers insight into available technologies, yields of bioethanol achieved by current manufacturing practices, and goals for future innovation.

Cheese whey is a waste produced in the dairy industry which generates problems if it is dumped directly into the sewer due to its high organic load. An alternative for cheese whey management is anaerobic digestion, a biological process that transforms organic matter into biogas and digestate, two products with significant energy and agricultural potential. This work was aimed at contributing to the building of knowledge about the anaerobic degradation of cheese whey, developing a bibliometric analysis, and tracing trends in related research from 2010 up to the present, using PRISMA® to develop a systematic review based on Scopus® and using Excel® and bibliometric software (VosViewer® and RefViz®) for the identification of information. Our results show that the research around cheese whey is relatively recent and that the highest percentage of publications is from 2018 onwards. Twelve variables of the anaerobic cheese whey degradation process were identified and grouped into five factors: substrate, reactor configuration, digestate analysis, microbiological analysis, and inoculum. Likewise, it was identified that most of the anaerobic processes allow the implementation of the circular economy into the dairy sector. In conclusion, the application of anaerobic digestion in the dairy sector can help to close the productive cycles, produce biofuels, and reduce pollution.

The increased demand for conscious, sustainable and beneficial products by the consumers has pushed researchers from both industries and universities worldwide to search for smart strategies capable of reducing the environmental footprint, especially the ones connected with industrial wastes. Among various by-products, generally considered as waste, those obtained by winemaking industries have attracted the attention of a wide variety of companies, other than the vineries. In particular, grape pomaces are considered of interest due to their high content in bioactive molecules, especially phenolic compounds. The latter can be recovered from grape pomace and used as active ingredients in easily marketable cosmetic products. Indeed, phenolic compounds are well known for their remarkable beneficial properties at the skin level, such as antioxidant, antiaging, anti-hyperpigmentation and photoprotective effects. The exploitation of the bioactives contained in grape pomaces to obtain high value cosmetics may support the growing of innovative start-ups and expand the value chain of grapes. This review aims to describe the strategies for recovery of polyphenols from grape pomace, to highlight the beneficial potential of these extracts, both in vitro and in vivo, and their potential utilization as active ingredients in cosmetic products.

Although replacing biomass, (e.g., wood chips and pellets), with thinning wood and herbaceous biomass is eco-friendly and economically advantageous, their direct utilization in plant boilers is associated with ash-related challenges, including slagging and fouling. The aim of this study is to determine the effects of ash removal treatment (ashless biomass (ALB)) in the context of solid fuel power plant boilers. Ash was removed via neutralization of metal ions and carboxylic acids contained in the biomass ash. The ash removal rate of K, Na, Cl was indicated by assessing the total biomass before and after ash removal treatment, via XRF analysis. Co-combustion with sub-bituminous coal and ALB-treated biomass was analyzed using a drop tube furnace and revealed that NOx and SOx values converged converge toward an approximate 10 ppm error, whereas the Unburned Carbon (UBC) data did not exhibit a specific trend. Factors associated with slagging and fouling, (capture efficiency (CE), and energy based growth rate (GRE)) were calculated. All biomass samples without pretreatment exhibited V-shaped variation. Conversely, for ashless biomass (ALB) samples, CE and GRE gradually decreased. Thus, the ALB technique may minimize slagging and fouling in a boiler, thus, reducing internal corrosion associated with ash deposition and enhancing the economic operation of boilers.

The usage of palm oil empty fruit bunches (EFBs) in the gasification process adds value to the empty bunches as a renewable energy source. In this study, we design and manufacture a new updraft type of gasifier reactor without a blower so that it does not require electric power in its operation, but uses power from engine suction. Our test results compare the use of biomass waste in conjunction with diesel fuel to run a diesel power plant for 20 min at a load of 10,000 W: diesel with coconut shell charcoal (350 mL), diesel with acacia wood charcoal (380 mL), and diesel with EFB charcoal (400 mL). The test shows that the highest efficient and the most optimal biomass in the gasification process is coconut shell charcoal, because coconut shell charcoal has a dense structure and, at the time of the experiment, the coconut shell charcoal was filled 15 cm below the gas outlet pipe hole. From the standpoint of the economic value of the gasifier reactor that is proposed in this study, the result with the lowest cost is that of diesel with EFB charcoal, because, in this experiment, EFBs were the biomass that was not purchased. The additional use of empty fruit bunches of charcoal is able to save 50% diesel usage.

Fluctuating crude oil price and global environmental problems such as global warming and climate change lead to growing demand for the production of renewable chemicals as petrochemical substitutes. Butanol is a nonpolar alcohol that is used in a large variety of consumer products and as an important industrial intermediate. Thus, the production of butanol from renewable resources (e.g., biomass and organic waste) has gained a great deal of attention from researchers. Although typical renewable butanol is produced via a fermentative route (i.e., acetone-butanol-ethanol (ABE) fermentation of biomass-derived sugars), the fermentative butanol production has disadvantages such as a low yield of butanol and the formation of byproducts, such as acetone and ethanol. To avoid the drawbacks, the production of renewable butanol via non-fermentative catalytic routes has been recently proposed. This review is aimed at providing an overview on three different emerging and promising catalytic routes from biomass/organic waste-derived chemicals to butanol. The first route involves the conversion of ethanol into butanol over metal and oxide catalysts. Volatile fatty acid can be a raw chemical for the production of butanol using porous materials and metal catalysts. In addition, biomass-derived syngas can be transformed to butanol on non-noble metal catalysts promoted by alkali metals. The prospect of catalytic renewable butanol production is also discussed.

The cocombustion of coal and pinus sawdust waste is an economically viable and sustainable option for increasing the share of biomass in energy production. This technology also has the potential to reduce the emission of greenhouse gases from existing coal fired power plants. The thermal synergistic effects of cocombusting Hwange bituminous coal (HC) with Pinus sawdust (PS) were thus investigated using thermogravimetric analysis. Fuel blending mass ratios of 100HC, 90HC10PS, 80HC20PS, 70HC30PS, and 100PS under an oxidative atmosphere at three different heating rates of 5, 12.5, and 20 °C/min were used for the experimental setup. Zero to negative synergy was generally observed for the mass loss curves (TG) at different blending ratios. Generally positive synergy was observed with relation to rate of mass loss curves (DTG) for the 80HC20PS and 70HC30PS fuel blends only. The ignition index increased with blending ratio by an average of 42.86%, whilst the burnout index showed a maximum increase of 14.6% at 20 °C/min. However, the combustion index representative of stability showed a decreasing trend generally for all the heating rates. No combustion index produced a linear variation with temperature, though upon evaluation, an optimum mass ratio of 20% pinus sawdust was suggested. The chosen optimum blending ratio demonstrated increased ignition and burnout indexes whilst maintaining the stability of combustion at a reasonable range.

Value creation through waste recycling is important for a sustainable society and future. In particular, biomass, which is based on crops, is a great recyclable resource that can be converted into useful materials. Black tea is one of the most cultivated agricultural products in the world and is mostly discarded after brewing. Herein, we report the application of black tea waste biomass as electrode material for supercapacitors through the activation of biomass hydrochar under various conditions. Raw black tea was converted into hydrochar via a hydrothermal carbonization process and then activated with potassium hydroxide (KOH) to provide a large surface area and porous structure. The activation temperature and ratio of KOH were controlled to synthesize the optimal black tea carbon (BTC) with a large surface area and porosity suitable for use as electrode material. This method suggests a direction in which the enormous amount of biomass, which is simply discarded, can be utilized in the energy storage system. The synthesized optimal BTC has a large surface area of 1062 m2 and specific capacitance up to 200 F∙g−1 at 1 mV∙s−1. Moreover, it has 98.8% retention of charge–discharge capacitance after 2000 cycles at the current density of 5 A∙g−1.

The steelmaking industry requires coke as a reducing agent, as an energy source, and for its ability to hold slag in a blast furnace. Coking coal as raw coke material is very limited. Studying the use of biomass as a mixture of coking coal in the synthesis of biocoke is necessary to reduce greenhouse gas coal emissions. This research focuses on biomass and heating temperature through the coal blending method to produce biocoke with optimal mechanical properties for the blast-furnace standard. The heating temperature of biomass to biochar was evaluated at 400, 500, and 600 °C. The blending of coking coal with biochar was in the compositions of 95:5, 85:15, and 75:25 wt.%. A compacting force of 20 MPa was employed to produce biocoke that was 50 mm in diameter and 27 mm thick using a hot cylinder dye. The green sample was heated at 1100 °C for 4 h, followed by quenching with a water medium, resulting in dense samples. Increasing heating temperature is generally directly proportional to an increase in fixed carbon and calorific value. Biocoke that meets several blast-furnace criteria is a coal mixture with coconut-shell charcoal of 85:15 wt.%. Carbonization at 500 °C, yielding fixed carbon, calorific value, and compressive strength, was achieved at 89.02 ± 0.11%; 29.681 ± 0.46 MJ/kg, and 6.53 ± 0.4 MPa, respectively. This product meets several criteria for blast-furnace applications, with CRI 29.8 and CSR 55.1.

Biomass is one of the most important sources of renewable energy. It is expected that in the coming decades, biomass will play a major role in replacing fossil fuels. The most commonly used biofuels include wood pellet, which is a cost-effective, uniform and easy-to-use material. In view of the growing interest in this type of resource, novel methods are being investigated to improve the quality of pellet. This article presents the results of a laboratory study focusing on wood pellets refined with waste sunflower cooking oil applied by spraying. In this work, authors attempted to modify the energy parameters of wood pellets with the use of waste cooking oil. Addition of waste cooking oil, applied at the rates of 2%, 4%, 6%, 8%, 10% and 12% relative to the weight of pellets, increased the calorific value of the pellets without decreasing their durability. The highest dose of the modifier (12%) on average led to a 12–16% increase in calorific value. In each case, the addition of sunflower oil resulted in decreased contents of ash in the pellets; on average a decrease of 16–38% was observed in the samples treated with the highest dose of the modifier. The treatment led to a higher content of elements affecting the heating value, i.e., carbon and hydrogen, which on average increased by 7.5–12%, and 7.0–10.0%, respectively. The presented method seems to be a promising way of increasing the calorific value of pellets. Further research on refining the method and the possibility of using it in industry is necessary.

Corona electrostatic separation can remove inorganic materials from coal, reduce coal ash content and sulfur content and improve coal quality, reduce air pollution caused by smoke dust, SOX, and COX. The performance of corona electrostatic separation technology in cleaning a middle ash medium-ash, high-sulfur coal was experimentally investigated. The electrode voltage, drum rotational speed, and feeding speed were tested, whereas other parameters were maintained constant during the experiment. The results indicate that the performance of this technology in cleaning medium-ash, high-sulfur coal can be improved by optimizing the process parameters. The results demonstrate that corona electrostatic separation is effective for the beneficiation of this grade coal. In addition, the efficiency of coal cleaning is significantly improved by adding the second stage beneficiation to clean the middlings out from the first stage beneficiation. In this study, the first stage of beneficiation recovered 38.00% (by weight) of clean coal (ash content below 20%), and the second stage recovered 48.58% (by weight) of clean coal, improving the overall separation efficiency from 0.69 to 1.74. Furthermore, the sulfur content was reduced from 4.71% (raw coal) to 3.53% (clean coal). Our result show that corona electrostatic separation can effectively reject inorganic sulfur from raw coal, and the two-stage separate is also very helpful for coal purification.

The use of food additives (such as dyes, which improve the appearance of the products) has become more prominent, due to the rapid population growth and the increase in demand for beverages and processed foods. The dyes are usually found in effluents that are discharged into the environment without previous treatment; this promotes mass contamination and alters the aquatic environment. In recent years, advanced oxidation processes (AOPs) have proven to be effective technologies used for wastewater treatment through the destruction of the total organic content of toxic contaminants, including food dyes. Studies have shown that the introduction of catalysts in AOPs improve treatment efficiency (i.e., complete decomposition without secondary contamination). The present review offers a quick reference for researchers, regarding the treatment of wastewater containing food dyes and the different types of AOPs, with different catalyst and nanocatalyst materials obtained from traditional and green chemical syntheses.

Several organic acids have been indicated among the top value chemicals from biomass. Lignocellulose is among the most attractive feedstocks for biorefining processes owing to its high abundance and low cost. However, its highly complex nature and recalcitrance to biodegradation hinder development of cost-competitive fermentation processes. Here, current progress in development of single-pot fermentation (i.e., consolidated bioprocessing, CBP) of lignocellulosic biomass to high value organic acids will be examined, based on the potential of this approach to dramatically reduce process costs. Different strategies for CBP development will be considered such as: (i) design of microbial consortia consisting of (hemi)cellulolytic and valuable-compound producing strains; (ii) engineering of microorganisms that combine biomass-degrading and high-value compound-producing properties in a single strain. The present review will mainly focus on production of organic acids with application as building block chemicals (e.g., adipic, cis,cis-muconic, fumaric, itaconic, lactic, malic, and succinic acid) since polymer synthesis constitutes the largest sector in the chemical industry. Current research advances will be illustrated together with challenges and perspectives for future investigations. In addition, attention will be dedicated to development of acid tolerant microorganisms, an essential feature for improving titer and productivity of fermentative production of acids.

Health services quality and sustainability rely mainly on a qualified workforce. Adequately trained public health personnel protect and promote health, avert health disparities, and allow rapid response to health emergencies. Evaluations of the healthcare workforce typically focus on physicians and nurses in curative medical venues. Few have evaluated public health workforce capacity building or sought to identify gaps between the academic training of public health employees and the needs of the healthcare organizations in which they are employed. This project report describes the conceptual framework of “Sharing European Educational Experience in Public Health for Israel (SEEEPHI): harmonization, employability, leadership, and outreach”—a multinational Erasmus+ Capacity Building in Higher Education funded project. By sharing European educational experience and knowledge, the project aims to enhance professionalism and strengthen leadership aspects of the public health workforce in Israel to meet the needs of employers and the country. The project’s work packages, each jointly led by an Israeli and European institution, include field qualification analysis, mapping public health academic training programs, workforce adaptation, and building leadership capacity. In the era of global health changes, it is crucial to assess the capacity building of a well-qualified and competent workforce that enables providing good health services, reaching out to minorities, preventing health inequalities, and confronting emerging health challenges. We anticipate that the methods developed and the lessons learned within the Israeli context will be adaptable and adoptable by other countries through local and cultural adjustments.

An effective analytical technique for biomass characterisation is inevitable for biomass utilisation in energy production. To improve biomass processing, various thermal conversion methods such as torrefaction, pyrolysis, combustion, hydrothermal liquefaction, and gasification have been widely used to improve biomass processing. Thermogravimetric analysers (TG) and gas chromatography (GC) are among the most fundamental analytical techniques utilised in biomass thermal analysis. Thus, GC and TG, in combination with MS, FTIR, or two-dimensional analysis, were used to examine the key parameters of biomass feedstock and increase the productivity of energy crops. We can also determine the optimal ratio for combining two separate biomass or coals during co-pyrolysis and co-gasification to achieve the best synergetic relationship. This review discusses thermochemical conversion processes such as torrefaction, combustion, hydrothermal liquefaction, pyrolysis, and gasification. Then, the thermochemical conversion of biomass using TG and GC is discussed in detail. The usual emphasis on the various applications of biomass or bacteria is also discussed in the comparison of the TG and GC. Finally, this study investigates the application of technologies for analysing the composition and developed gas from the thermochemical processing of biomass feedstocks.

Viruses are major contributors to the annual 1.3 million deaths associated with the global burden of diarrheal disease morbidity and mortality. While household-level water treatment technologies reduce diarrheal illness, the majority of filtration technologies are ineffective in removing viruses due to their small size relative to filter pore size. In order to meet the WHO health-based tolerable risk target of 10−6 Disability Adjusted Life Years per person per year, a drinking water filter must achieve a 5 Log10 virus reduction. Ceramic pot water filters manufactured in developing countries typically achieve less than 1 Log10 virus reductions. In order to overcome the shortfall in virus removal efficiency in household water treatment filtration, we (1) evaluated the capacity of chitosan acetate and chitosan lactate, as a cationic coagulant pretreatment combined with ceramic water filtration to remove lab cultured and sewage derived viruses and bacteria in drinking waters, (2) optimized treatment conditions in waters of varying quality and (3) evaluated long-term continuous treatment over a 10-week experiment in surface waters. For each test condition, bacteria and virus concentrations were enumerated by culture methods for influent, controls, and treated effluent after chitosan pretreatment and ceramic water filtration. A &gt, 5 Log10 reduction was achieved in treated effluent for E.coli, C. perfringens, sewage derived E. coli and total coliforms, MS2 coliphage, Qβ coliphage, ΦX174 coliphage, and sewage derived F+ and somatic coliphages.

Plant fibers are sustainable sources of materials for many industries, and can be obtained from a variety of plants. Cellulose is the main constituent of plant-based fibers, and its properties give the characteristics of the fibers obtained. Detailed characterization of cellulosic fibers is often performed after lengthy extraction procedures, while fast screening might bring the benefit of quick qualitative assessment of unprocessed stems. The aim of this research was to define some marker spectral regions that could serve for fast, preliminary qualitative characterization of unprocessed stems from some textile plants through a practical and minimally invasive method without lengthy extraction procedures. This could serve as a screening method for sorting raw materials by providing an accurate overall fingerprint of chemical composition. For this purpose, we conducted comparative Fourier Transform Infrared Spectroscopy (FT-IR) prospecting for quality markers in stems of flax (Linum usitatissimum L.), velvet leaf (Abutilon theophrasti Medik.), hemp (Cannabis sativa L.) and jute (Corchorus olitorius L.). Analysis confirmed the presence of major components in the stems of the studied plants. Fingerprint regions for cellulose signals were attributed to bands at 1420–1428 cm−1 assigned to the crystalline region and 896–898 cm−1 assigned to the amorphous region of cellulose. The optimization of characterization methods for raw materials is important and can find immediate practical applications.

Microplastics reach the aquatic environment through wastewater. Larger debris is removed in sewage treatment plants, but filters are not explicitly designed to retain sewage sludge’s microplastic or terrestrial soils. Therefore, the effective quantification of filtration system to mitigate microplastics is needed. To mitigate microplastics, various devices have been designed, and the removal efficiency of devices was compared. However, this study focused on identifying different fabrics that shed fewer microplastics. Therefore, in this study, fabric-specific analyses of microplastics of three different fabrics during washing and drying processes were studied. Also, the change in the generation of microplastics for each washing process of standard washing was investigated. The amount of microplastics released according to the washing process was analyzed, and the collected microplastics’ weight, length, and diameter were measured and recorded. According to the different types of yarn, the amount of microplastic fibers produced during washing and drying varied. As the washing processes proceed, the amount of microplastics gradually decreased. The minimum length (&gt, 40 µm) of micro-plastics generated were in plain-woven fabric. These results will be helpful to mitigate microplastics in the production of textiles and in selecting built-in filters, and focusing on the strict control of other parameters will be useful for the development of textile-based filters, such as washing bags.

Biodiesel is one of the more recent green fuel products in the world. It can be produced from several raw materials such as straight vegetable oils, animal fats, tallow, and waste cooking oils, and blended with diesel. Properties of biodiesel are different compared to fossil diesel in terms of production methods and emission levels released after combustion in an internal combustion engine. Kuwait consumes a huge amount of energy which is almost 8% to meet the increasing demand for electricity and water. Moreover, the use of electricity in the production of biodiesel increases energy use and cost of production. Kuwait is receiving an amount of solar irradiation ranging from 2050 kWh/m2 to 2100 kWh/m2. The present study is concerned with the evaluation of the potential to use solar energy to produce biodiesel from sheep fat waste as a raw material. An experimental test rig was set up for a single cylinder diesel engine in the laboratory, where a solar power system was used to assist the production process of biodiesel from tallow waste. The biodiesel is then blended with diesel at different volume percentages, such as graded as B20, B50, B75 and B100, respectively. The exhaust gases such as oxygen, carbon monoxide, carbon dioxide, nitric oxide and nitric dioxide where also analyzed. An optimum decrease in values of nitric oxide levels was observed at the load of 51%, 68%, 85% and 93% during the operation at blend of biodiesel B20, B50, B75 and B100, respectively. Nitric dioxide was decreased at the load of 51%, 68% and 85% during the operation using B20, B50 and B75, respectively. Optimum SFC was achieved at B20, B50 and B75 during high loads of 85% and 93%. It can be concluded that sheep tallow biodiesel shows a promising result in terms of fuel consumption and environmental emissions of greenhouse gases.