Search

The 802.11ac is a significant landmark in wireless communications, as it pushes towards new rate limits by utilizing downlink multiuser multiple-input multiple-output (MIMO) beamforming to transmit data to various locations simultaneously. However, successful beamforming relies on intelligent user selection which requires, in turn, extensive overhead of channel calibration between the AP and each of the candidate users. The large overhead involved in the user selection procedure overwhelms the multiuser gain and hinders the utilization of multiuser MIMO. The phenomenon is even more acute when APs handle large groups of mobile users, which frequently associate and disconnect, making the process of acquiring channel state from all users and selecting the appropriate group even harder. Thus, the subtle relation between the achievable rate of a scheduling algorithm and the overhead it requires is significant for the 802.11ac performance analysis. In this paper, we provide a rigorous analysis of distributed algorithms that schedule a group of users for the downlink. In particular, we accommodate common scheduling methods for the 802.11ac protocol and analyze both their achievable rate and their calibration process overhead. Both analysis and extensive simulations depict the superiority of simple threshold-based methods in terms of the throughput. [ABSTRACT FROM AUTHOR]

Terahertz (THz) band communication is envisioned as a key technology to satisfy the increasing demand for ultrabroadband wireless systems, thanks to its ultrabroad bandwidth. Tailored for the unique properties of pulse-based communications in the THz band, two timing acquisition algorithms are proposed and analyzed thoroughly in this paper. First, a low-sampling-rate (LSR) synchronization algorithm is proposed, by extending the theory of sampling signals with finite rate of innovation in the communication context and exploiting the properties of the annihilating filter. The simulation results show that the timing accuracy at an order of ten picoseconds is achievable. In particular, the LSR algorithm has high performance with uniform sampling at $1/20$ of the Nyquist rate when the signal-to-noise ratio (SNR) is high (i.e., greater than 18 dB). Complementary to this, a maximum likelihood (ML) approach for timing acquisition is developed, which searches for the timing offsets by adopting a two-step acquisition procedure based on the ML criterion. The simulation results show that the ML-based algorithm is well suitable in the low SNR case with a half-reduced search space. For further evaluation, the error performance and the resulting bit-error-rate sensitivity to the timing errors in the LSR and the ML algorithms are both analytically and numerically studied. This paper provides very different and promising angles to efficiently and reliably solve the timing acquisition problem for pulse-based THz band wireless systems. [ABSTRACT FROM PUBLISHER]

Due to signal fading and user mobility in wireless networks, quality-of-service provisioning for wireless services has become more challenging. As a promising technique, cooperative communications make use of the broadcasting nature of the wireless medium to facilitate data transmission and, thereby, reduce energy consumption. However, in many studies on wireless cooperative diversity, it is often assumed that the number of relays or the relay distribution intensity is known a priori. In this paper, we relax this assumption and propose an algorithm to estimate the relay intensity for a backoff-based cooperative scheme, where the relays are distributed as a homogeneous Poisson point process. It is proved that the algorithm can converge to an optimal solution with the minimum estimation error. Based on the estimated relay intensity, we further investigate a distributed energy saving strategy, which selectively turns off some relays to reduce energy consumption while maintaining the required transmission success probability. The performance of the proposed cooperative scheme is analytically evaluated with respect to the collision probability. The numerical and simulation results demonstrate the high accuracy and efficiency of the intensity estimation algorithm and validate the theoretical analysis. Moreover, the proposed cooperative scheme exhibits significant energy savings and satisfactory transmission performance, which offers a good match to accommodate green communications in wireless networks. [ABSTRACT FROM PUBLISHER]

This paper considers a method for improving physical layer security of wireless networks with full-duplex radio. In particular, fast algorithms are developed to compute power allocations in subcarriers, subject to power and rate constraints, to maximize the secrecy capacity of a three-node network consisting of a source, a full-duplex destination, and an eavesdropper. A residual level of radio self-interference channel is considered. The optimal power allocation at the destination is found to be significant especially when its power budget is high. Also studied in this paper are a network with multiple full-duplex destinations and another network with multiple sources. Using the algorithms developed in this paper, we are able to show that a multiuser strategy that optimizes the power distributions among the users (in terms of either the sources or the destinations) can yield a substantial gain of secrecy capacity over a single-user strategy. [ABSTRACT FROM PUBLISHER]

In this paper, we study the power allocation problem in a multiuser cooperative network, where users help each other's transmissions to an access point. We use iterative double auction (IDA) game to model the interaction among the users and the access point. In each iteration of this game, the users first submit bids for buying other users' power and asks for selling its own power, and then, the access point determines the power allocation based on users' bids and asks. We propose a distributed algorithm for the implementation of the IDA-based power allocation. We also show that the proposed algorithm achieves a weighted sum signal-to-noise ratio (sum-SNR)-optimal solution. Simulation results are conducted to verify the performance of the proposed algorithm. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a self-directed adaptive phased array control method using the low-frequency part of the signal for a millimeter-wave wireless personal area network, which can reduce the hardware requirement and power consumption compared with those of the conventional digital beamforming method. The signal from each element antenna of the antenna array is phase shifted and down converted to the baseband and then divided into two paths. The first paths are low-pass filtered to extract the low-frequency part of the signals for beamforming control. The second paths from all antennas are combined in-phase in an analog domain and then sampled by two high-speed A/D converters for demodulation. A beamforming algorithm using the sampled low-frequency part of the signal is also proposed. The beamforming calculation time is established as a function of the signal-to-noise ratio, the bandwidth of the low-frequency part, and the required phase control accuracy. The calculated values match the measured results. Using the IEEE 802.15.3c specifications with an eight-element array antenna, the calculation time is less than \5~\mu\s for initial beam establishment and less than \30~\mu\s for beam tracking. Therefore, high-speed beamforming is possible while reducing the power consumption. [ABSTRACT FROM AUTHOR]

We consider the uplink transmission in multiuser wireless systems with multiple single-antenna transmitting users and a multiantenna receiver. We address two problems in this paper. The first problem is user admission, i.e., given a large number of users, how to admit the maximum number of users that can simultaneously satisfy quality of service (QoS) and power constraints. The second problem is how to distribute the data among the users when they are allowed to share data before transmission. The aim is to minimize the total data exchange cost. Such a problem is called user clustering. We formulate those problems into sparsity-maximization problems, which are NP-hard. Inspired by compressive sensing techniques, we propose a common framework to tackle those problems by first applying the \ell1 -norm relaxation and then solving them with convex optimization methods. Simulations show that the proposed algorithms achieve excellent performance. For user admission, the numbers of admitted users by the proposed algorithms are close to the optimum numbers of admitted users obtained by exhaustive search (ES) . For user clustering, the total data exchange cost is reduced by more than 10% after only a few iterations. When the QoS requirement is low, the user data exchange can be avoided using the proposed method, which achieves the optimum result obtained by ES. [ABSTRACT FROM PUBLISHER]

Consider the single-group multicast beamforming problem, where multiple users receive the same data stream simultaneously from a single transmitter. The problem is NP-hard and all existing algorithms for the problem either find suboptimal approximate or local stationary solutions. In this paper, we propose an efficient branch-and-bound algorithm for the problem that is guaranteed to find its global solution. To the best of our knowledge, our proposed algorithm is the first tailored global algorithm for the single-group multicast beamforming problem. Simulation results show that our proposed algorithm is computationally efficient (albeit its theoretical worst-case iteration complexity is exponential with respect to the number of receivers) and it significantly outperforms a state-of-the-art general-purpose global optimization solver called Baron. Our proposed algorithm provides an important benchmark for performance evaluation of existing algorithms for the same problem. By using it as the benchmark, we show that two state-of-the-art algorithms, semidefinite relaxation algorithm and successive linear approximation algorithm, work well when the problem dimension (i.e., the number of antennas at the transmitter and the number of receivers) is small but their performance deteriorates quickly as the problem dimension increases. [ABSTRACT FROM PUBLISHER]

We present in this paper a novel proactive interference avoidance scheme for mobile-to-mobile (M2M) communication as an underlay in Long-Term Evolution (LTE) downlink networks. The proposed scheme introduces an intelligent user-selective resource allocation algorithm that aims to proactively avoid interference between M2M pairs and LTE regular users while achieving a satisfactory link budget for both M2M and LTE regular links. The proposed resource allocation algorithm is based on a novel low-complexity interference estimation approach that requires only channel quality indicator (CQI) information (CSI). Since the CQI reporting mechanism has been already implemented in current LTE systems, the proposed algorithm is indeed practical and standard compatible, compared with the existing works that require perfect knowledge of the channel state information (CSI). In this research, achievable data throughput with LTE-compliant adaptive modulation and coding has been adopted as the optimization measurement, rather than the information-theoretic capacity. Therefore, the performance of the proposed scheme is practically realizable in LTE communication systems. Since the performance of the proposed scheme highly relies on the accuracy of CQI feedback, we also carry out performance analysis to evaluate the impact of CQI estimation error and delay. The simulation results show that the total achievable data throughput for LTE networks is dramatically enhanced by M2M communication with this proposed interference avoidance resource allocation scheme. [ABSTRACT FROM PUBLISHER]

In heterogeneous networks (HetNets), the load between macrocell base stations (MBSs) and small-cell base stations (SBSs) is imbalanced due to their different transmission powers and locations. This load imbalance significantly impacts system performance and affects the experience of mobile users (MUs) with different priorities. In this paper, we aim to distributively optimize the user association in HetNets with various user priorities to solve the load balancing problem. Since the user association is a binary matching problem, which is NP-hard, we propose a distributed belief propagation (BP) algorithm to approach the optimal solution. We first develop a factor graph model, using the network topology, to represent this user association problem. With this factor graph, we propose a novel distributed BP algorithm by adopting the proportional fairness as the objective. Next, we theoretically prove the existence of the fixed point in our BP algorithm. To be more practical, we develop an approximation method to significantly reduce the computational and communication complexity of the BP algorithm. Furthermore, we analyze some properties of the factor graph relevant to the performance of the BP algorithm using the stochastic geometry. Simulation results show that 1) the proposed BP algorithm well approaches the optimal system performance and achieves a much better performance compared with other association schemes and that 2) the analytical results on the average degree distribution and sparsity of the factor graph match with those obtained from the Monte Carlo simulations. [ABSTRACT FROM PUBLISHER]

Estimation of signal-to-noise ratio (SNR) plays an important role in many fields of communications. This paper addresses the SNR estimation of multiple phase-shift keying (MPSK) signals in Nakagami- $m$ fading channels. A family of SNR estimators with closed-form expressions is developed based on the relationship among different orders of moments. Compared with the existing algorithms, the estimator, which exploits the minimum order of moments, exhibits the best performance in general. We also propose a joint estimation algorithm for SNR and the fading factor when it is unknown. Simulation results verify the feasibility and superiority of the proposed algorithms. [ABSTRACT FROM PUBLISHER]

In an interference limited network, joint power and admission control (JPAC) aims at supporting a maximum number of links at their specified signal-to-interference-plus-noise ratio (SINR) targets while using minimum total transmission power. Various convex approximation deflation approaches have been developed for the JPAC problem. In this paper, we propose an effective polynomial time non-convex approximation deflation approach for solving the problem. The approach is based on the non-convex \ell q~(0< q< 1) approximation of an equivalent sparse \ell 0 reformulation of the JPAC problem. We show that, for any instance of the JPAC problem, there exists a \bar q\in (0,1) such that it can be exactly solved by solving its \ell q approximation problem with any q\in (0, \bar q]. We also show that finding the global solution of the \ell q approximation problem is NP-hard. Then, we propose a potential reduction interior-point algorithm, which can return an \epsilon -KKT solution of the NP-hard \ell q approximation problem in polynomial time. The returned solution can be used to check the simultaneous supportability of all links in the network and to guide an iterative link removal procedure, resulting in the polynomial time non-convex approximation deflation approach for the JPAC problem. Numerical simulations show that the proposed approach outperforms the existing convex approximation approaches in terms of the number of supported links and the total transmission power, particularly exhibiting a quite good performance in selecting which subset of links to support. [ABSTRACT FROM PUBLISHER]

Ultradense heterogeneous networks (HetNets) are emerging as an inevitable approach to tackle the capacity crunch in cellular networks. However, imbalanced load among small and macrocells and poor resource utilization as a consequence in HetNets remains a long-standing problem. This paper addresses this problem by presenting a solution for maximization of coverage and capacity while minimizing load imbalance among macro and small cells. Most recent studies on the topic focus on either optimization of coverage, capacity or load, or a combination of two of these three intertwined objectives. We formulate the optimization problem as a function of two hard parameters namely antenna tilt and transmit power, and a soft parameter, cell individual offset, that affect the coverage, capacity, and load directly. The resulting solution is a combination of the otherwise conflicting coverage and capacity optimization (CCO) and load balancing (LB) self-organizing network (SON) functions. In the presented joint CCO-LB solution, a conflict free operation of CCO and LB is ensured by designing a novel load aware user association methodology and resolving the effects of shadowing on coverage probability using stochastic approximation. The problem is proven to be nonconvex and is solved using genetic algorithm, sequential quadratic programming, and pattern search algorithms. The proposed CCO-LB solution is compared against two recently proposed CCO and CCO-LB solutions in the literature. Results show that the proposed solution can yield significant gain in terms of throughput, spectral efficiency, and load distribution. [ABSTRACT FROM AUTHOR]

Spanner construction is one of the most important techniques for topology control in wireless networks. A spanner can help not only to decrease the number of links and to maintain connectivity but also to ensure that the distance between any pair of communication nodes is within some constant factor from the shortest possible distance. Due to the non-locality, constructing a spanner is especially challenging under the physical interference model signal-to-interference-and-noise-ratio (SINR). In this paper, we develop two localized randomized algorithms SINR-directed-YG and SINR-undirected-YG to construct a directed Yao graph (YG) and an undirected YG in O(\log n) ( n is the number of wireless nodes) time slots with a high probability, in which each node is capable of performing successful local broadcasts to gather neighborhood information within a certain region and the SINR constraint is satisfied at all the steps of the algorithms. The resultant graph of SINR-undirected-YG, which is based on SINR-directed-YG, possesses a constant stretch factor \frac 11-2\sin (\pi/c) , where c>6 is a constant. To the best of our knowledge, SINR-undirected-YG is the first spanner construction algorithm under SINR. We also obtain Yao-Yao graph under SINR. Extensive theoretical performance analysis and simulation study are carried out to verify the effectiveness and the efficiency of our proposed algorithms. [ABSTRACT FROM AUTHOR]

The multiple-input multiple-output (MIMO) system makes efficient use of spectrum and increases the transmission throughput in wireless communications. The sphere decoding (SD) is an efficient algorithm that enables the maximum-likelihood (ML) detection for the MIMO system. However, the SD algorithm has variable complexity, and its complexity increases rapidly with decreasing signal-to-noise ratio (SNR). In this paper, we propose a novel ML detection algorithm for the MIMO system based on differential metrics. We define the differential metrics and derive the associated recursive calculation. We then give the indicative functions, which can be used to possibly find some ML-detected bits of the initial sequence. The indicative functions are further applied to implement an efficient tree search for ML detection. The proposed algorithm does not need QR decomposition and matrix inversion. The tree search process needs only the additive operation, while the number of multiplications before the tree search is constant. Our algorithm can achieve the exact ML detection as the SD algorithm. Unlike the SD algorithm, the complexity of our algorithm reduces with decreasing SNR, whereas at high SNR, the complexity is nearly constant. We also give the convergence analysis for the SD and proposed algorithms, and the simulation verifies our analysis. For the proposed algorithm, the number of necessary memory is constant during the tree search, and the implementation by parallel processing is possible. The soft output of ML-detected bits can also be generated in our algorithm. [ABSTRACT FROM PUBLISHER]

A number of inherently unipolar orthogonal frequency division multiplexing (OFDM) modulation schemes have been introduced recently in an attempt to improve the energy efficiency of OFDM-based intensity modulation and direct detection (IM/DD) systems. All such algorithms, including asymmetrically clipped optical OFDM (ACO-OFDM), pulse-amplitude-modulated discrete multitone modulation (PAM-DMT) and unipolar orthogonal frequency division multiplexing (U-OFDM), experience an inherent loss in spectral efficiency caused by the restrictions imposed on the OFDM frame structure required for the generation of a unipolar signal. The current paper presents a modified modulation approach, termed enhanced U-OFDM (eU-OFDM), which compensates the spectral efficiency loss in U-OFDM. At the same time, it still allows for the generation of an inherently unipolar modulation signal that achieves better performance in terms of both electrical power and optical power dissipation compared to the conventional state-of-the-art technique direct current (DC)-biased optical OFDM (DCO-OFDM). To the best of the authors' knowledge, the current work also presents the first experimental proof-of-concept demonstration of both U-OFDM and eU-OFDM, and clearly demonstrates the significant energy advantages that these two schemes can introduce in an optical wireless communications (OWC) system. [ABSTRACT FROM PUBLISHER]

Optimal signaling for secrecy rate maximization in Gaussian MIMO wiretap channels is considered. While this channel has attracted a significant attention recently and a number of results have been obtained, including the proof of the optimality of Gaussian signalling, an optimal transmit covariance matrix is known for some special cases only and the general case remains an open problem. An iterative custom-made algorithm to find a globally-optimal transmit covariance matrix in the general case is developed in this paper, with guaranteed convergence to a global optimum. While the original optimization problem is not convex and hence difficult to solve, its minimax reformulation can be solved via the convex optimization tools, which is exploited here. The proposed algorithm is based on the barrier method extended to deal with a minimax problem at hand. Its convergence to a global optimum is proved for the general case (degraded or not) and a bound for the optimality gap is given for each step of the barrier method. The performance of the algorithm is demonstrated via numerical examples. In particular, 20 to 40 Newton steps are already sufficient to solve the sufficient optimality conditions with very high precision (up to the machine precision level), even for large systems. Even fewer steps are required if the secrecy capacity is the only quantity of interest. The algorithm can be significantly simplified for the degraded channel case and can also be adopted to include the per-antenna power constraints (instead or in addition to the total power constraint). It also solves the dual problem of minimizing the total power subject to the secrecy rate constraint. [ABSTRACT FROM PUBLISHER]

Radar signal design in a spectrally crowded environment is currently a challenge due to the increasing requests for spectrum from both military sensing applications and civilian wireless services. The goal of this paper is to improve a previously devised algorithm for the synthesis of optimized radar waveforms fulfilling spectral compatibility with overlaid licensed radiators. The new technique achieves an enhanced spectral coexistence with the surrounding electromagnetic environment through a suitable modulation of the transmitted waveform energy, which was kept fixed at the maximum level in the previously devised algorithm. At the analysis stage, the waveform performance is studied in terms of trade-off among the achievable Signal to Interference Plus Noise Ratio (SINR), spectral shape, and the resulting Autocorrelation Function (ACF), also in situations where the previous technique cannot be applied. [ABSTRACT FROM AUTHOR]

Cognitive radio (CR) is currently one of the most promising solutions for designing spectrum-efficient wireless communication systems. In this paper, we present a greedy cognitive access policy that handles spectrum sensing with the tools of image processing. By means of the Wigner–Ville transform (WVT), we are able to analyze the time and frequency features of the received interference, and represent them on a time–frequency grid as an image in which brightness reveals the spectrum occupancy. According to sensed interference, each secondary user autonomously tries to access the grid following a multiple-division principle, i.e., by properly shaping the signal in the code, time, and frequency domains. In detail, this is realized by processing the WVT to derive the shaping mask (and the matching algorithm) that allows the filling up of the “time spectrum holes.” Numerical simulations and a test-bed implementation show how the proposed scheme outperforms selected state-of-the-art approaches while still presenting an affordable computational cost. [ABSTRACT FROM AUTHOR]

We propose a marginal-power-efficiency-based adaptation (MPEA) scheme for distributed power control in wireless communication systems. Nodes autonomously adapt their transmit power by keeping a differential measure of power efficiency, which is defined as the additional capacity obtained per unit of transmit power, at a desirable threshold. We combine the MPEA with the Foschini–Miljanic (FM) algorithm into a power control algorithm for a multihop cellular network where nodes can dynamically adapt to both local and global conditions. We derive a fixed point to which the power allocations converge under the scheme and illustrate a significant improvement in the system throughput. [ABSTRACT FROM AUTHOR]

A method for superresolution direction-of-arrival (DoA) estimation of correlated signals using a circular array is presented. This is accomplished in two steps: 1) the directions of arrival and amplitudes of signals with angular spacing larger than the array beamwidth are detected using the array signal segregation using an iterative approach (ASSIA) and 2) signals with angular proximity smaller than the array beamwidth are separated using a novel closely spaced nulls-synthesis method (CNSM). It is demonstrated that the proposed ASSIA-CNSM is superior to the other superresolution DoA estimation techniques such as maximum-likelihood method. The experimental results indicate that ASSIA-CNSM can be effectively used to distinguish the DoAs of the signals with angular spacing as small as 0.15 BW (where BW is the array half-power beamwidth) and with signal-to-noise ratio as low as 5 dB. [ABSTRACT FROM AUTHOR]

Channel estimation is essential in a Multiple Input Multiple Output (MIMO) wireless communication in 5G. In the MIMO system, numerous antennas are utilized on the sender and receiver sides for enhancing spectral efficiency and reliability. The channel estimation can improve the exactness of the received signal. Increasing the number of channel coefficients can make channel estimation fairly complex. Transmitting multiple paths have some delay and signal echoes. Therefore, channel assessment is very necessary for efficiently receiving the transmitted signals. A novel Enhanced Convolution Neural African Buffalo approach was developed for channel estimation purposes to overcome such issues. Moreover, the additive white Gaussian noise channel is created for MIMO communication. The simulation of this research is done using the network simulator platform. Sequentially, the proposed system outcomes are compared with other techniques in terms of throughput, accuracy, signal to noise ratio, mean square error, and bit error rate. The comparison results also proved the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

We consider a heterogeneous cellular network with densely underlaid small cell access points (SAPs). Wireless backhaul provides the data connection from the core network to SAPs. To serve as many SAPs and their corresponding users as possible with guaranteed data rates, admission control of SAPs needs to be performed in wireless backhaul. Such a problem involves joint design of transmit beamformers, power control, and selection of SAPs. In order to tackle such a difficult problem, we apply $\ell_1$-relaxation and propose an iterative algorithm for the $\ell_1$-relaxed problem. The selection of SAPs is made based on the outputs of the iterative algorithm, and we prove such an algorithm converges locally. Furthermore, this algorithm is fast and enjoys low complexity for small-to-medium sized systems. However, its solution depends on the actual channel state information, and resuming the algorithm for each new channel realization may be unrealistic for large systems. Therefore, we make use of the random matrix theory and also propose an iterative algorithm for large systems. Such a large-system iterative algorithm can produce the asymptotically optimum solution for the $\ell_1$-relaxed problem, which only requires large-scale channel coefficients irrespective of the actual channel realization. Near optimum results are achieved by our proposed algorithms in simulations. [ABSTRACT FROM PUBLISHER]

Parameter estimation of multiple sinusoids is one of the fundamental problems of signal processing having numerous application areas, including wireless communications and array signal processing. This article proposes an iterative, fast, and efficient algorithm to estimate the frequencies and amplitudes of multiple sinusoids in noisy environments. The proposed approach interpolates on the q-shifted DFT coefficients of multiple sinusoids. We theoretically demonstrate that the performance of the proposed algorithm depends on DFT-shift, number of iterations and minimum DFT frequency separation parameters. Further, mean square error of the proposed algorithm achieves the Cramér-Rao lower bound when these parameters are selected appropriately. We also propose solid bounds regarding how these parameters can be selected for optimum overall performance. The total computational cost of the proposed algorithm is in the order of O(K N log N), where K is the number of sinusoidal components and N is the signal length. We provide comprehensive numerical simulations that confirm the correctness of our theoretical deductions. [ABSTRACT FROM AUTHOR]

The challenge of the fifth generation of wireless systems is to overcome fundamental limits of existing cellular networks by means of advanced technologies such as network densification. Nevertheless, dense and random deployment of the network infrastructure poses new challenges in the network management. In particular, rethinking cell association policies and introducing new specific load balancing strategies will be mandatory to shift traffic from heavy-loaded cells to light-loaded neighbors. Toward this goal, cell biasing is considered one of the most effective way. This letter proposes a low-complexity distributed cell-specific bias algorithm suitable for an actual implementation on highly dense scenarios. This solution takes into account the users’ data rate requests and aims at minimizing the outage rate defined as the amount of unsatisfied data rate requests. Numerical results show that despite its low complexity, the solution achieves performance only slightly lower than the benchmark near-optimum solution. [ABSTRACT FROM AUTHOR]

Fifth generation new radio aims to facilitate new use cases in wireless communications. Some of these new use cases have highly demanding latency requirements; many of the powerful forward error correction codes deployed in current systems, such as the turbo and low-density parity-check codes, do not perform well when the low-latency requirement does not allow iterative decoding. As such, there is a rejuvenated interest in noniterative/one-shot decoding algorithms. Motivated by this, we propose a signal-to-noise ratio-adaptive convolutionally coded system with optimized constellations designed specifically for a particular set of convolutional code parameters. Numerical results show that significant performance improvements in terms of bit-error-rate and spectral efficiency can be obtained compared to the traditional adaptive modulation and coding systems in low-latency communications. [ABSTRACT FROM AUTHOR]

Future multi-input multi-output (MIMO) wireless communications systems will use beamforming as a first-step towards realizing the capacity requirements necessitated by the exponential increase in data demands. The focus of this work is on beam alignment for time-division duplexing (TDD) systems, for which we propose a number of novel algorithms. These algorithms seek to obtain good estimates of the optimal beamformer/combiner pair (which are the dominant singular vectors of the channel matrix). They are motivated by the power method, an iterative algorithm to determine eigenvalues and eigenvectors through repeated matrix multiplication. In contrast to the basic power method which considers only the most recent iteration and assumes noiseless links, the proposed techniques consider information from all the previous iterations of the algorithm and combine them in different ways. The first technique (Sequential Least-Squares method) sequentially constructs a least-squares estimate of the channel matrix, which is then used to calculate the beamformer/combiner pair estimate. The second technique (Summed Power method) aims to mitigate the effect of noise by using a linear combination of the previously tried beams to calculate the next beam, providing improved performance in the low-SNR regime (typical for mmWave systems) with minimal complexity/feedback overhead. A third technique (Least-Squares Initialized Summed Power method ) combines the good performance of the first technique at the high-SNR regime with the low-complexity advantage of the second technique by priming the summed power method with initial estimates from the sequential method. [ABSTRACT FROM PUBLISHER]

Coordinated precoding based on interference alignment is a promising technique for improving the throughputs in future wireless multicell networks. In small networks, all base stations can typically jointly coordinate their precoding. In large networks, however, base station clustering is necessary due to the otherwise overwhelmingly high channel state information (CSI) acquisition overhead. In this work, we provide a branch and bound algorithm for finding the globally optimal base station clustering. The algorithm is mainly intended for benchmarking existing suboptimal clustering schemes. We propose a general model for the user throughputs, which only depends on the long-term CSI statistics. The model assumes intracluster interference alignment and is able to account for the CSI acquisition overhead. By enumerating a search tree using a best-first search and pruning sub-trees in which the optimal solution provably cannot be, the proposed method converges to the optimal solution. The pruning is done using specifically derived bounds, which exploit some assumed structure in the throughput model. It is empirically shown that the proposed method has an average complexity that is orders of magnitude lower than that of exhaustive search. [ABSTRACT FROM PUBLISHER]