Search

Collect screen paperboard of mine power transformer and ordinary power transformer in practical lifetime cycle to make insulation test samples, and according to the standard of power, use test means such as viscosity tester, scanning electron microscopy to compare and analyze microstructures of insulation paper such as polymerization degree, surface morphology of mine power transformer and ordinary power transformer, as well as electrical properties such as partial discharge and electrical strength; at the same time, effect of microstructure changes on electrical performances during aging was discussed. The analysis results show that the insulation defects gradually form and expand in the insulation paper during the aging process; compared with the insulation paper of ordinary power transformers, the surface morphology changes of the insulation paper of mine power transformers are more obvious, and the formed defects are more significant.In the aging process, the polymerization degree of insulation paper of ordinary power transformer and mine power transformer presents a gradual decline trend, but the decline speed of polymerization degree of mine power transformer insulation paper is faster.The operating environment of mining area is the main reason that the aging of insulation paper of mine power transformer is more serious than that of ordinary power transformer.In the process of operation, the insulation paper of mine power transformer will produce more discharge quantity, more discharge times and wider discharge phase than ordinary power transformer.In the aging process, the electrical strength of insulation paper of both ordinary power transformer and mine power transformer decreases gradually, but the electrical strength of insulation paper of mine power transformer is lower than that of ordinary power transformer.The microstructural defects of insulation paper of mine power transformers are the direct causes of the more significant changes in their electrical properties.In the process of state monitoring and maintenance of power equipment, it is suggested that the insulation state monitoring of mine power transformers should be carried out strictly according to the power standards,electrical property parameters are more suitable for insulation status monitoring and fault diagnosis of mine power transformer.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Harbin University of Science & Technology is the property of Journal of Harbin University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Food Research & Development is the property of Food Research & Development Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Mine Automation is the property of Industry & Mine Automation Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of South China University of Technology (Natural Science Edition) is the property of South China University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Polymer Materials Science & Engineering is the property of Sichuan University, Polymer Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Coal Science & Technology (0253-2336) is the property of Coal Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to deal with the problem that the marine concrete with large dosage of mineral admixture in the actual project faces the harsh marine environment prematurely and is easy to be eroded by chlorine salt, this paper proposed to use magnetized water instead of tap water to prepare marine concrete, studied the influence law of magnetized water on the mechanical properties and durability of marine concrete at different ages, and analyzed the microstructure of marine concrete using the mercury instrusion porosimetry and scanning electron microscope. The study shows that magnetized water improves the workability of marine concrete. Compared with tap water, magnetized water has obvious improvement on the early mechanical properties of marine concrete, in which the compressive strength and splitting tensile strength of C50 marine concrete with a curing age of 7 d increase by 17.9% and 16.5%, respectively. Regardless of different curing ages, the resistance to carbonation and chloride ion penetration of magnetized water marine concrete are better than tap water marine concrete. The degree of reaction of cementitious materials in magnetized water marine concrete is higher, with fewer cracks, and the microstructure between cementitious materials and aggregates is more compact. The overall porosity is lower, with more harmless pores and fewer harmful pores, leading to a denser microstructure. Thus the mechanical properties and durability of marine concrete are improved. [ABSTRACT FROM AUTHOR]

In this paper, the aluminum sulfate based alkali-free liquid accelerating agent was modified by fluorine silicon slag, and the performance index of alkali-free liquid accelerating agent modified by fluorine silicon slag was tested. XRD, TG-DTG and SEM were used to explore the action mechanism of aluminum sulfate base alkali-free liquid accelerating agent modified by fluorine silicon slag on cement hydration process. The results show that with the increase of fluorine silicon slag content, the rapid setting effect and strength of mortar increase first and then decrease. When the alkali-free liquid accelerating agent is modified by fluorine silicon slag, the appropriate content of fluorine silicon slag is 5.0% (mass fraction). At this time, the initial setting time is 1 min 20 s, the final setting time is 5 min 20 s, 1 d compressive strength is 13.8 MPa, and 28 d compressive strength is 52.4 MPa. Calcium silicate hydrate is formed by the reaction of silica in fluorine silicon slag and cement hydration product calcium hydroxide, which is beneficial to improve the early strength of cement. However, the process of cement hydration and hardening process is hindered by the reaction of fluorine and calcium hydroxide to produce a large amount of calcium fluoride precipitation. [ABSTRACT FROM AUTHOR]

Copyright of Modern Food Science & Technology is the property of Editorial Office of Modern Food Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of the Chinese Society of Rare Earths is the property of Editorial Department of Journal of the Chinese Society of Rare Earths and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Atomic & Molecular Physics (1000-0364) is the property of Journal of Atomic & Molecular Physics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Journal of Geological Hazard & Control is the property of China Institute of Geological Environmental Monitoring (CIGEM) Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Shanghai Jiao Tong University (1006-2467) is the property of Journal of Shanghai Jiao Tong University Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Coal Science & Technology (0253-2336) is the property of Coal Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Iron Steel Vanadium Titanium is the property of Iron Steel Vanadium Titanium Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Iron Steel Vanadium Titanium is the property of Iron Steel Vanadium Titanium Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

As an important load-bearing part of SiCf / SiC composites, the microstructure and performance evolution of SiC fibers under high temperature oxidative environment directly affect their practical application. This paper reviewed the oxidation mechanism and oxidation model, as well as the influencing factors of oxidation behavior of SiC fibers. The approaches to improve the oxidation resistance of SiC fibers were also summarized and introduced. The oxidation behavior of SiC fibers is divided into passive and active oxidation according to the oxygen partial pressure. The high temperature oxidation in the water-oxygen environment accelerates the increase of the SiC fibers oxide layer thickness and the generation of cracks, resulting in the degradation of the mechanical properties. The composition and microstructure also have different effects on the oxidation results. This paper is intended to provide some reference for the application of SiC fibers under high temperature oxidative environments. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Coal Science & Technology (0253-2336) is the property of Coal Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Steel Pipe is the property of Steel Pipe Magazine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Corn is abundant in carbohydrate, protein, carbohydrates and other nutrients. However, because of its large embryo, it is easy to be infected by microorganisms and insects, which leads to the deterioration of corn quality. Therefore, the quality preservation and storage of corn is a challenge. So it is necessary to clarify the rule and change of corn storage quality. Corns with initial water content of 13.04%, 14.03% and 14.99% were taken as reasearch objects in this paper. During storage between 70% relative humidity and 20 °C (quasi-low temperature environment), the changes laws of quality indexes such as bulk density, fatty acid value, germination rate, mold activity and microstructure of corn grain were studied emphatically. Otherwise changes of storage quality of corn at 70% relative humidity and 25 °C (room temperature environment) were compared. Therefore it can provide reference for safe storage of high-quality corn. The results demonstrated that the germination rate, fatty acid value and bulk density of corn under 20 °C were slower than those under 25 °C. And they were in the suitable storage range in accordance with the national standard. The number of fungal spores increased sharply with the prolonged storage time. Meanwhile it showed significant correlation with the initial moisture content of corn. In other words, the number of fungal spores for corn under 14.99%w.b was stored for 120 d, and the safe storage periods of corn under 13.04%w.b, 14.03%w.b and 14.99%w.b were 180 d, 180 d and 100 d, respectively. The microstructure of corn kernel changed gradually during storage. It means the appearance changed from smooth and tidy to concave and convex folds. Furthermore, the arrangement of starch granules changed from tight structure to sparse and disordered structure. The main factors of corn quality and microstructure change were corn initial water content and storage time, during storage at quasi-low temperature environment. So the change laws of corn storage quality with different water content were explored, so as to provide new research perspective for maize post-harvest to reduce loss and guarantee quality. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Materials Engineering / Cailiao Gongcheng is the property of Journal of Materials Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Nickel-based superalloy is an essential material to prepare hot-end components in aero-engines and gas turbines, due to its excellent mechanical properties under high temperature. Additive manufacturing (AM) is one of the most important techniques to fabricate superalloy components with complex geometry. In this paper, the research progress of microstructure and defects of AMed superalloy is reviewed. Based on the existing literature, tensile properties of GH3536, GH3625 and GH4169 are summarized. Typical applications of AMed superalloy components in aero-engines and gas turbines are presented. Finally, for the problems in existing investigations, it is suggested that the future research can focus on materials design, heat treatment/hot isostatic pressure process optimization, single crystal preparation, real-time monitoring technique development and internai surface treatment technique innovation. [ABSTRACT FROM AUTHOR]

GH3536 and GH4169 nickel-based superalloys are widely used in aerospace engines and other hot-end components. In this paper, GH3536 and GH4169 alloy samples were fabricated by optimizing the process parameters using selective laser melting(SLM), the defect characteristics and microstructure of two alloys, as well as the effects of different homogenization temperatures and holding times on microstructure evolution, average grain size, and properties of two alloys were studied. The defect characteristics and microstructure were investigated by OM, SEM, and EDS, et al. The Vickers hardness meter was used to test the alloy's microhardness. The results indicate that the as-built GH3536 alloy exhibits more defects, including pores, cracks, and lack of only pores are present in as-built GH4169 alloy. The melt pool of alloy is eliminated by homogenization treatment, and the grains grow into equiaxed grains. m23C6 are found to distribute within grain boundaries and grain interiors of GH3536 alloy, while NbC are found to distribute within grain boundaries and grain interiors of GH4169 alloy, and the amount of precipitates is significantly reduced with the increase of homogenization temperature. The average grain size of GH3536 alloy is increased by 106.8% from 48.5 m at 1130 t/1 h to 100.9 m at 1250 t/4 h. The grain size of GH4169 alloy is increased by 53.3% from 57 m at 1080 t/1 h to 87.4 m at 1200 t/4 h.The homogenization treatment of GH3536 alloy and GH4169 alloy results in a significant decrease in microhardness of the former, from 262HV to 180-190HV, while the latter shows a significant increase, from 313HV to 430-450HV. [ABSTRACT FROM AUTHOR]

GH3536 and GH4169 nickel-based superalloys are widely used in aerospace engines and other hot-end components. In this paper, GH3536 and GH4169 alloy samples were fabricated by optimizing the process parameters using selective laser melting(SLM), the defect characteristics and microstructure of two alloys, as well as the effects of different homogenization temperatures and holding times on microstructure evolution, average grain size, and properties of two alloys were studied. The defect characteristics and microstructure were investigated by OM, SEM, and EDS, et al. The Vickers hardness meter was used to test the alloy's microhardness. The results indicate that the as-built GH3536 alloy exhibits more defects, including pores, cracks, and lack of fusion, while only pores are present in as-built GH4169 alloy. The melt pool of alloy is eliminated by homogenization treatment, and the grains grow into equiaxed grains. m23C6 are found to distribute within grain boundaries and grain interiors of GH3536 alloy, while NbC are found to distribute within grain boundaries and grain interiors of GH4169 alloy, and the amount of precipitates is significantly reduced with the increase of homogenization temperature. The average grain size of GH3536 alloy is increased by 106.8% from 48.5 -m at 1130 t/1 h to 100.9 m at 1250 t/4 h . The grain size of GH4169 alloy is increased by 53.3% from 57 m at 1080 t/1 h to 87.4 m at 1200 t/4 h.The homogenization treatment of GH3536 alloy and GH4169 alloy results in a significant decrease in microhardness of the former, from 262HV to 180-190HV, while the latter shows a significant increase, from 313HV to 430-450HV. [ABSTRACT FROM AUTHOR]

In this paper, gahnite (ZnAl2 O4) was prepared with solid phase reaction by ZnO and Al2 O3 as raw materials. The micro-structure change of ZnAl2 O4 was researched when ZnO/Al2 O3 molar ratios were 1.0 : 0. 9, 1.0 : 1.0 and 1.0: 1.1, respectively. In addition, the effect of ZnAl2 O4 on properties of high alumina castables were studied. The results show that when the molar ratio of ZnO to Al2 O3 is 1.0: 0.9, due to the excessive ZnO, it volatilizes because of the removal of O2- to produce liquid phase, and the surface of ZnAl2 O4 particles is microporous structure. When the molar ratio of ZnO and Al2 O3 is 1.0: 1.0 (standard molar ratio), the surface of ZnAl2 O4 particles with standard molar ratio is smooth. The lattice strain value (0.085 86) of standard molar ratio ZnAl2 O4 is the smallest, which can capture more manganese ions and iron ions in steel slag. When the molar ratio of ZnO to Al2 O3 is 1.0: 1.1, the surface of ZnAl2 O4 particles is rough. The high alumina castable with standard molar ratio ZnAl2 O4 has denser structure, highest strength and best slag resistance. [ABSTRACT FROM AUTHOR]

Copyright of Modern Food Science & Technology is the property of Editorial Office of Modern Food Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nuclear Safety is the property of Nuclear & Radiation Safety Center and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this paper, TWL12 + TWL20 inorganic salt aluminum coating was sprayed on the surface of Ni-based P/M superalloy. The microstructure changes of inorganic salt aluminum coating and P/M superalloy after high temperature oxidation at 700, 750 C and 800 C were studied by XRD, SEM, EPMA and TEM. The results show that after high temperature oxidation, the surface structure of the coating peels off, and the aluminum in the coating diffuses with the substrate to form a transition layer composed of oxidation zone, diffusion layer and interdiffusion zone. The oxidation zone is the outermost layer, where is mainly enriched with O and Al elements to form Al2O3 layer. The diffusion layer mainly contains Ni and Al elements, forming NiAl phase and α-Cr phase dispersed in it. Finally, the interdiffusion zone rich in Ti, Cr, Co, Ta and other elements exists between the diffusion zone and the matrix, which is mainly composed of Ni2AlTi phase matrix and σ phase dispersed in it. The analysis shows that the thickness of transition layer changes with the increase of oxidation temperature, it is mainly manifested by the increase of the width of the interdiffusion zone, the increase of the size of α-Cr phase in the diffusion layer and σ phase in the interdiffusion zone, and the growth trend of σ phase along the vertical transition zone is intensified. The oxidation weight gain curve shows that the transition layer exhibits good oxidation resistance during high temperature oxidation at 750 and 800 after the surface structure of the coating falls off, it indicates that the TWL12 + TWL20 inorganic salt aluminum coating has the potential to provide high temperature oxidation coating protection for advanced P/M superalloy used in aeroengines. [ABSTRACT FROM AUTHOR]

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Automobile Technology & Material is the property of Automobile Technology & Material Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

:In paper, recycled Al-1.15Mg-1.02Si-0.7Cu alloy was optical prepared by meiting and casting, the microstructural evolution of the alloy were analyzed by using optical nicroscopy(OM), scanning e!ectron microscopy (SEM), e!ectron back scattered diffraciion(EBSD) and transmission e!ectron nicroscope(TEM),the effects of heal treatment on the mechanical and corrosionlresistant properties of the extruded proUes were invesiigated. The results show that the recrystaliization of the alloy was competed by soiid solution at 550C and fine equaaxaal crystass were obtanned. The iime required for the alloys to reach peak hardness under artificia1 aging cond!tions at 155,175 and 195 C was 18,8 and 4 h, respectively, and the peak hardnesses were 132.96 HV,132. 94 HV and 132.22 HV, respectively, wtth the extruded profiles obtanning the highest tensle strength of 410. 42 MPa and higher elongation of 14. 75% under aging cond!tions at 175 C/8 h. The optimizedsoid solution process ss 550 C/1 hand the artifidal aging process ss 175 C/8 h. The tendency of the alloy to intergranular corrosion ss more pronounced,and the alloy corrodes most severely under peakaged cond!tions, followed by over-aged and weakest underaged. [ABSTRACT FROM AUTHOR]