Search

The development of pesticides has significantly advanced global agricultural production, but the ensuing problem of pesticide residues poses a severe threat to human health. So, there is an urgent need to establish a rapid, accurate, sensitive, cost-effective and on-site method for large-scale detection of pesticide residues. Electrochemical paper-based analytical devices (ePADs) represents a highly sensitive and portable microanalysis system, which uses paper as a substrate and relies on a capillary force to drive the fluid for the separation and detection of samples. The diversity of pesticides and agricultural products and the complexity of matrices impose high requirements on the sample preparation procedure. This article summarizes the preparation process of ePADs from the aspects of paper selection, the establishment of hydrophilic and hydrophobic channels, the integration of separation zones, and electrode printing. Subsequently, this paper establishes the relationship between pesticide detection and chip preparation based on the mechanism of electrochemical detection of pesticides. Finally, it discusses the advantages, challenges and future prospects of ePADs with a view to providing theoretical reference for enhanced application of ePADs in the field of pesticide residue detection.

Partial discharge at the oil-paper interface is one of the main reasons for the failure of oil-paper insulation in oil-immersed transformers. In this article, based on the numerical model of multi-branching streamer discharge, a multi-branching streamer discharge model in oil-paper insulation system is constructed by further considering the charge transport characteristics of oil-paper interface. The surface discharge characteristics under the influence of the dielectric constant ratio between natural ester insulating oil and insulating paper, and the spacing between needle electrode and paperboard are studied by finite element method, respectively. The results show that the distance between the needle electrode and the paperboard, and the dielectric constant ratio of insulating oil and insulating paper both significantly affect the streamer branching. The smaller the clearance between the needle electrode and paper-board is, the more serious the inhibition of streamer branches at the oil-paper interface is, which resulting in the streamers near the oil-paper interface are more significant effect on the propagation of the z-axis streamer. When the dielectric constant of the insulating oil is larger than that of the paperboard, the development and branching of the streamer in the oil will be more significant. On the contrary, the streamer is more likely to develop along the surface of the paperboard and accumulate charge at the oil-paper interface.

Oil-immersed power transformer is an important part of power grid, and its reliable operation plays a vital role in pomler system security. Aiming at the problem that the insulation state of transformer cannot be assessed quantitatively after long-term operation, the accelerated aging and damp tests of oil-paper insulation model are carried out in this paper. The influence of aging and damp of oil-paper insulation on its recovery voltage curves is explored. The particle swarm optimization (PSO) is used to improve the parameter prediction method of extreme learning machine (ELM), which realizes the quantitative assessment of aging and moisture of oil-paper insulation based on the characteristic parameters of the recovery voltage curve. By comparing the physical and chemical performance analysis of oil-paper insulation models, it is shown that the prediction accuracy of PSO-ELM method is much higher than that of traditional ELM method. The absolute error range for predicting the moisture content of oil-paper insulation the degree of polymerization (DP) of pressboard is less than ±0.4% or ±30, respectively.

Ultra high frequency (UHF) partial discharge (PD) detection is a common method for transformer oil-paper insulation defect location. However, the accuracy of PD positioning in practical application is easily affected by noise and sensor layout. In order to ensure the effectiveness of PD positioning detection of transformer oil-paper insulation defect, an UHF PD positioning detection platform for oil-paper insulation defects is established. Based on the conventional K-means method, a modified clustering demarcation PD anti-interference positioning method is proposed, which effectively reduces the positioning error. Aiming at the problem of sample clustering demarcation aliasing, when the optimal correction coefficient L is 1.1, the UHF PD positioning error can be reduced to less than 0.1 m, which verifies the effectiveness of the proposed method. Finally, the variation law of positioning error of different sensor layout is analyzed, and the optimal layout scheme of UHF sensor for transformer oil-paper insulation defect detection is proposed, which can provide reference for the layout and positioning of transformer on-line monitoring sensor.

High prevalence and low control rate of hypertension have brought a significant disease burden globally. In order to improve the level of hypertension prevention and treatment, remote healthcare and digital medicine have been rapidly developed and widely used worldwide. Currently, there are no relevant regulations in China for these technologies. In 2023, the Italian Society of Arterial Hypertension issued a position statement to guide the development, validation, and clinical use of remote medicine and digital healthcare. This article will interpret this position paper, focusing on the forms of application of telemedicine and digital healthcare in managing hypertension and its related cardiovascular diseases, key research evidence, existing advantages, as well as current opportunities and challenges. The aim is to guide general practitioners in China on how to utilize these technologies in managing hypertension and related cardiovascular conditions.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A flexible wipe paper for rapid nondestructive detection of ferbam residues on the surface of fruits and vegetables by surface-enhanced Raman scattering (SERS) was prepared using filter paper as the substate by a simple soaking method. The synthesis and storage conditions were optimized to ensure that the SERS method has excellent performance. The results showed that concentration factor of silver nanoparticles (AgNPs), soaking time in AgNP solution and drying method greatly affected the performance of the SERS wipe paper. The performance under the condition of soaking for 8 h in a 5-fold concentrate of AgNP solution was significantly better than that under other conditions. The SERS wipe paper prepared by vacuum drying had better performance that those prepared by other drying methods. After 9 days of storage at −20 ℃, the optimized substrate retained approximately 50% of the original peak value. Besides, it exhibited good sensitivity, uniformity, and repeatability. The limit of detection (LOD) for ferbam on a glass plate was 4.07 × 10-6 mg/mL, and the LOD for ferbam on the surface of spinach and nectarine were 0.043 and 0.062 mg/kg, respectively. This study provides an excellent basis for the development and utilization of SERS wipe paper.

With the population aging in China, the prevalence and mortality rate of Alzheimer's disease (AD) have been rising in China. AD has become one of the major threats to people's health and social sustainable development. In order to support the Healthy China Initiative and promote health in China, "Chinese Alzheimer's Disease Blue Book (Simplified Edition)"(refer to as the Blue Book) was compiled by experts and scholars from the National Center for Neurological Disorders, Xuanwu Hospital, Capital Medical University; the National Center for Chronic and Noncommunicable Disease Control and Prevention, Chinese Center for Disease Control and Prevention; the National Health Commission Capacity Building and Continuing Education Center; and the China Population and Development Research Center. The epidemiological characteristics, diagnosis and treatment status, prevention and treatment management of AD and related cognitive disorders in China were systematically reviewed in the Blue Paper, aiming to provide references for the prevention of AD, provide support for the standardized diagnosis and treatment of the disease, and provide a reference for the government to formulate relevant health policies. Specifically, the Blue Book covers the following topics of AD and related cognitive disorders: (1)epidemiology characteristics; (2)economic burden; (3)influencing factors; (4)China Brain Cognitive Health Index; (5) diagnosis status; (6)treatment status; (7)construction of national center for cognitive disorders;(8)community-based prevention and control; (9) AD patients care; (10)public health resources for prevention and control.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

BackgroundIn recent years, the rising number of e-cigarette users among adolescents and the surging cases of lung injury related to e-cigarette use have attracted the attention of researchers in various fields.ObjectiveTo identify the research hotspots and trends of e-cigarette or vaping product use associated lung injury (EVALI) worldwide from 2013 to 2022 by bibliometric and visual analysis. MethodsWeb of Science Core Collection was selected to obtain literature related to EVALI from 2013 to 2022 across the world, statistics were calculated by country/region, institution, author, journal, cited literature, keyword, etc. CiteSpace 6.2.R1 was used for visual analysis to draw diagrams of publication trend, author cooperation network, co-citation clustering time distribution, and keyword cluster. ResultsA total of 888 EVALI-related papers published between 2013 and 2022 were retrieved. The number of publications was gradually increased, with a significant increase in 2020 and a decrease from 2021, but the number of citations was increased year by year. The most active country was the United States (631 articles). European and American countries cooperated closely and the centrality was prominent. Among the publishing institutions, the University of California system topped the list with 103 articles. Rahman I (27 articles) published the most articles and had a high degree of centrality; Goniewicz M L was the most cited author; and the network analysis diagram showed relatively weak collaboration between authors. The American Journal of Respiratory and Critical Care Medicine was the journal with the highest number of publications (94 articles). The top 5 cited articles were all cited more than 300 times. The leading high-frequency keywords of EVALI-related studies were nicotine (149 times), exposure (118 times), and oxidative stress (80 times). The cluster of key nodes in the co-citation network and the clustering time distribution diagram indicated youth e-cigarette addiction received widespread attention from society. From the top 25 keywords with the strongest bursts, the focus of research on the pathogenesis of EVALI gradually shifted from the oxidative stress damage associated with e-cigarette vapor to the oxidative effect of flavoring chemicals in the process of lung injury. The current research interests in this field were mainly the mechanisms of various chemicals in e-cigarettes and the heating elements that led to damage to the lungs. ConclusionEVALI is receiving continuous attention from researchers in government, medical institutions, and other organizations. A variety of e-cigarette ingredients such as flavoring chemicals may lead to varying degrees of cytotoxicity, inflammation, and lung damage. However, the pathophysiology of EVALI remains unclear. In the future, more Chinese scholars should be encouraged to participate in this field.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Journal of Oral & Maxillofacial Surgery is the property of Shanghai Jiao Tong University, College of Stomatology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The insulation performance of transformer bushings is a crucial aspect that directly affects the safe operation of equipment. To diagnose the insulation status of transformer bushings and mitigate the impact of small-sample imbalanced data on diagnostic results, a particle swarm optimization combined with back propagation neural network (PSO-BPNN) and adaptive synthetic sampling (ADASYN) method are employed to fault diagnosis of transformer bushing. Initially, historical fault data of transformer bushings are gathered, and a sample set of dissolved gases in transformer oil with distinct fault categories is established. The ADASYN algorithm is used to synthesize the minority class samples in the original data, which allowed for obtaining balanced fault data. The balanced dissolved gases in oil served as the model input, and the fault status is used as the label output to diagnose the transformer bushings using the PSO-BPNN model. To diagnose the bushings under the original sample set, the back propagation neural network (BPNN), genetic combined with back propagation neural network (G-BPNN), cuckoo search combined with back propagation neural network (CS-BPNN), and PSO-BPNN models are used. The results reveal that the PSO-BPNN model based on ADASYN balanced data exhibited the highest accuracy among the various models for fault diagnosing the insulation status of transformer bushings. This approach effectively mitigate the impact of small sample imbalanced data on diagnostic results, and provide an effective method for assessing the insulation performance of transformer bushings.

Three kinds of commercial ink-jet printing paper were taken as the research objects, which were represented by sample A, sample B and sample C respectively. Sample A and sample C were domestic products Abbott and Jiayi, and sample B was foreign product Gulou. The structure and composition of the three sample coatings were determined, and the surface properties of the three coatings were analyzed. This helps to understand the performance status of inkjet paper products on the market, and has guiding significance for the study of various factors affecting the performance of inkjet paper coatings. AFM and SEM were used to observe the surface morphology of the three samples. It was found that the coating pigment particles of sample A and sample B had good dispersion uniformity, and the coating pigment particles of sample C aggregated and the dispersion uniformity was poor. The results of cross-section SEM and EDS analysis show that only sample B coating has a double-layer structure, in which the bottom layer is aluminum-based pigment and silicon-based pigment, and the surface layer is only aluminum-based pigment. The coatings of sample A and sample C are single-layer aluminum-based materials. The properties of the coating surface of the three samples were analyzed. The results showed that the basic properties of the three samples met the product quality standards. Among them, the coating of sample B had the highest gloss (74.30%), hardness (3H) and water resistance. In terms of ink absorption, the ink absorption of sample B coating (64.7%) was higher than that of sample C (57.9%), slightly lower than that of sample A (69.2%). Sample B had the best comprehensive performance among the three samples. Finally, a double-layer coating process scheme for improving the performance of inkjet printing paper is proposed, which provides a direction for improving the performance of inkjet printing paper and has practical significance for the research of advanced inkjet printing paper. [ABSTRACT FROM AUTHOR]

An experiment designed to predict the lifetime of the Xuan paper using the viscosity method is introduced in the form of group collaboration. This experiment is targeted at junior students who majored in conservation of cultural relics, with eight groups involved. Using a jacketed viscometer, the intrinsic viscosity of the two types of undegraded and degraded Xuan papers was determined, and the corresponding degree of polymerization (DP) was calculated. Then data were collected from all groups, and degradation rates of the papers were then calculated, which were then used to predict the life expectancy of the Xuan papers. The aim was to enhance students’ teamwork skills, practical experience, problem-solving abilities, data analysis, and scientific research capabilities, while also guiding them to apply their chemical knowledge to practical conservation for paper-based objects. [ABSTRACT FROM AUTHOR]

Utilizing the iron-carbon microelectrolysis technology to carry out in-depth treatment of waste paper and pulp wastewater, the optimal process parameters were determined based on single factor experiments. In addition, the response surface methodology was employed to optimize the process parameters by analyzing the experimental results. Under the optimized conditions, the excita1tion-emission-matrix spectra and GC-MS were used to analyze the water quality of the treated wastewater. The results showed that the optimal treatment conditions of iron-carbon microelectroly1sis process were initial pH=3.0, filler addition amount 255g L-1, reaction time 120 min, aeration amount 0.9 L min-1, and the COD removal efficiency was 32. 14% under these conditions; the maximum predicted value of COD removal rate calculated under the optimal process conditions was 34.57% from the response surface analysis, which was basically consistent with the experimental results. The results of excitation-emission-matrix spectra analysis showed that the iron-carbon micro1electrolysis process was effective in degrading humic acid and fulvic acid in waste paper and paper wastewater, and GC-MS analysis showed that the relative content of eicosanoids in wastewater was reduced from 43.31% to 4.79% of the original water after the iron-carbon microelectrolysis treat1ment, but a small amount of new pollutants were generated at the same time. [ABSTRACT FROM AUTHOR]

In the era of informatization and digitization, the rapid increase in the number of scientific papers has given rise to various challenges, such as lengthy articles, difficulty in information extraction and high time costs associated with reading. Literature reading challenges for researchers are increasingly tedious and time-consuming. By utilizing the language models, the assited reading system of scientific papers has been designed to address these challenges. By adopting machine reading comprehension technology as the core, the system parses scientific texts and offers some common questions to achieve automated response capabilities. By fully utilizing the pre-trained language model PERT, the system enhances its capabilities in semantic understanding and information extraction, effectively resolving various challenges in reading scientific papers and helping readers improve the efficiency of scientific literature review. [ABSTRACT FROM AUTHOR]

The Literary Mind and the Carving of Dragons is a comprehensive work of ancient Chinese literary theory. By visual analysis of relevant research, we can deeply sort out the academic context of "Dragon Studies" and grasp its development trends. Using the bibliometric tools CiteSpace and Vosviewer, and taking 703 core documents from the China National Knowledge Infrastructure (CNKI) as data samples, this paper drew various knowledge maps of the temporal and spatial distribution of documents and the evolution of the research trends, and quantitatively studied the research status of The Literary Mind and the Carving of Dragons. The results show that the research on "Dragon Studies" has gone through three stages: initial stage, growth stage and deepening stage. Based on the university department tradition, the main author groups and research institutions have formed, but the cooperation intensity between them is not high. The construction of the "Dragon Studies" system, comparison of classics, creation theory and English translation are hot topics of common focus. Its English translation and its relationship with Chinese literary theory will continue to be prominent in future research. [ABSTRACT FROM AUTHOR]

An innovative experimental approach based on a microfluidic paper-based chip has been designed for specific detection of Escherichia coli (E. coli). The chip is fabricated for detecting E. coli in water samples. The main contents include the preparation of paper chips, lysis of E. coli on the chip, detection of E. coli, optimization of detection conditions, and detection of E. coli in actual samples. This experiment integrates cutting-edge disciplines, demonstrating robust comprehensive and innovative characteristics. It aligns with the practical education concept marked by the progression from “basic experiment → comprehensive experiment → research-oriented experiment”, effectively strengthening students’ capacities for problem analysis and solution. [ABSTRACT FROM AUTHOR]

Test paper, a type of paper product chemically treated to produce color changes in response to specific substances, serves as a valuable tool for rapid detection and analysis. This experiment, based on the surface modification of glass fiber filter paper, introduces a heavy metal ion detection test paper designed with the fluorescence sensing characteristics of rare earth complexes. The test paper demonstrates its effectiveness and convenience in detecting heavy metal ions in water sources. The innovative test paper proves highly useful in addressing heavy metal ion contamination in water, emphasizing the significant role of chemistry in advancing ecological civilization. The simplified, safe, and environmentally friendly process of creating the test paper yields a practical and user-friendly product. This experiment not only educates on the general production and testing principles of test papers but also sparks students' interest in scientific exploration and application. The experiment, characterized by its simplicity, repeatability, low entry barrier, environmental friendliness, and safety, possesses a unique color aesthetic, leaving a lasting impression. It is suitable for conducting popular science experiments in public places and promoting awareness in experimental teaching across various educational levels. [ABSTRACT FROM AUTHOR]

With the rapid development of flexible electronics industry, the conventional PET, PEN and other plastic substrates are unable to satiate the requirement due to higher cost and low light extraction efficiency. Paper has broad prospects as a flexible substrate due to its wide access, low-cost and thinness. In this paper, we integrated epoxy resin into sulfuric acid paper to fabricate a new type of substrate: plastic-paper. The plastic-paper has excellent optical properties, mechanical properties as well as water and chemical stability, as found through testing. Results show that the surface flatness and wettability of the paper are improved by the application of epoxy resin coating. The plastic-paper has a high optical transmittance up to 88.25%, reaching the same level with PET substrate. And the plastic-paper also has a high transmittance haze of 62.9%, which is far higher than PET substrate. The plastic-paper has a tensile strength up to 108.4 MPa, along with excellent water and chemical stability. Successful fabrication the organic light-emitting device on the plastic-paper surface and emitted uniform light based on the principle of light-emitting electrochemical cell (LEC), under atmospheric condition. The best device performance with a maximum luminance of 396. 2 cd m-2, a maximum current efficiency of 0.64 cd A-1, which is 2.9 times higher than that of PET substrates, providing more excellent optoelectronic properties. The developed plastic-paper with high optical transmittance and high optical haze holds a great potential in flexible optoelectronic devices. [ABSTRACT FROM AUTHOR]

Traditional paper dyes are easy to fade under photothermal conditions, in contrast. waterborne organic pigments have excellent tinctorial strength and high light and weather resistance, which can meet the requirements of highend paper yarn to coloring efficacy and light fastness of the colorants. However, the lack of chemical and hydrogen bonds between organic pigment particles and plant fibers, and the pigments are difficult to fix in the structure of the paper. In this study, cellulose nanofibers (CNF/TOCNF) were used as the primary skeleton network and carboxymethyl cellulose (CMC) macromolecules were used as the secondorder reinforcement network, together construct a multilevel gradient network to enclose and fix organic pigment particles. The dispersion and fixation of the pigment particles are realized by double coating. The results show that the coloring efficacy and colorfastness of the paper yarn base paper can be improved significantly by using the gradient network to fix the pigment particles, and has a positive effect on improving the strength and roughness of the paper. This study has an important role in solving the problem of coloring technology in the production of high-end paper yarn. [ABSTRACT FROM AUTHOR]

To solve the environmental pollution and harm to human health caused by the use of adhesives in traditional paperboard, the development of environmentally friendly mycelium paperboard has become a hot topic. Due to the high dipole moment and hydrogen bonding between macromolecules, hyphae can form clamp shaped connection structures for nutrient reproduction and transfer, and can grow on natural agricultural waste, forming a natural biocomposite material. This study determined the combination of Ganoderma weberianum/corn straw, and designed single factor cultivation conditions such as cultivation time, straw particle size, and fructose addition to explore the effects on the mechanical properties, waterproof properties, and thermal decomposition performance of the hyphal paperboard formed by hot pressing. The optimal cultivation process was obtained through orthogonal experiments. The experimental results indicate that various factors have varying degrees of influence on the edgewise strength, flexural stiffness, and static bending strength and waterproofness of paperboard. Firstly, when the cultivation time was 30 days, the flexural stiffness reached 16.63 mN/m, which was 21.2% higher than the flexural stiffness of kraft paper (13.10 mN/m). Moreover, with the increase of cultivation time, the water absorption (24 hours) had also decreased from 3.92% to 1.27%. Secondly, previous research results have shown that the addition of fructose, glucose, and sucrose increases the biomass growth rate of strains. In this study, fructose was chosen as an exogenous nutrient, and the results showed that when a mass fraction of 5% fructose was added, the mechanical properties were the best, with a flexural stiffness of 18.87 mN/m, which was 30.5% higher than that of kraft paper (13.10 mN/m). Thirdly, the particle size of the sbstrate has a significant impact on the appearance and properties of the material. The results show that, from the appearance perspective, the mycelium paperboard made of 0.165～0.250 mm particle size has the closest appearance and feel to kraft paper. At the same time, during the testing period, it was found that the mycelium paperboard made of 0.165～0.250 mm straw was the least prone to deformation and loosening, and the molding effect was significantly improved compared to other components. In terms of mechanical properties, the edgewise strength increased by 17.4%, the static bending strength increased by 14.9%, and the flexural stiffness increased by 57.3%. The experimental results show that the degree of influence of various factors on the edgewise strength, flexural stiffness, and static bending strength of paperboard is in the order of particle size, cultivation time,fructose addition amount. When the particle size is 0.165～0.250 mm, the cultivation time is 30 days, and the fructose addition of 5.0%, the edgewise strength of the prepared paperboard is 14.36 N/mm, the static bending strength is 10.89 MPa, and the flexural stiffness is 33.09 mN/m. As the particle size decreases, the water absorption rate and water thickness expansion rate of the paperboard after 24 hours of water absorption decrease to 0.86% and 0.59%. The mycelium paperboard prepared by different single factors has the same thermal decomposition process, starting at around 150 ℃ and reaching its maximum at 350 ℃. This study provides a reference basis for the development and application of mycelium composite materials in the future. [ABSTRACT FROM AUTHOR]

In Older to promote the innovation of knitted fabric structure and surface effect, the semi-three-dimensional geometric origami force was taken as the research object, jlid its internal structure was deduced into plane form by analyzing the foliation principle of semi-three-dimensional form and using planarization design thinking. With the help of Ml Plus paein design software of STOLL company and CMS 502 computer flat knitting machine, the one-side and two-side pseupro-semi-three-dimensional geonfetric origami fabric was realized. The machine parameters, yarn selection, structure design and plate making were discussed in detail, and the influence of different structure and yarn material on the smart effect of the fabric was evaluated. The results show that using the double-sided structure design and yarn with high elasticity and hardness can better shape the semi-three-dimensional geometric origami. In addition, the flexible use of needle arrangement, yarn material and parameter changes in the design can form different geometric origami patterns of knitted fabrics, which provides a useful reference for the innovative design of fabric structure. [ABSTRACT FROM AUTHOR]

Objective: To analyze the characteristics of highly-cited papers in Chinese Journal of Epidemiology from 2020 to 2023, and provide a basis for subsequent paper solicitation and identify research hotspots. Methods: On December 9, 2023, the citation frequency of each paper in Chinese Journal of Epidemiology from 2020 to 2023 was obtained from China National Knowledge Infrastructure. The total citation frequency of each paper was sorted using Excel 2016 software, and papers with citation frequency ≥30 were extracted for analysis. The keywords of the papers and Contents in Brief were analyzed. Results: A total of 1 317 papers were included in the analysis, of which 389, 342, 308 and 278 papers were included from 2020 to 2023. The total citation frequency was 11 873, and all papers were cited with an average citation frequency of 9. The keywords with high citation frequency in the papers included 2019-nCoV, hypertension, colorectal tumor, hand-foot-mouth disease, hepatitis B. and the average frequency of citation were 162, 77, 62, 51 and 47, respectively. There were 15 highly cited Contents in Brief in total, 11 of which are vital Contents in Brief or unique Contents in Brief, including Response to COVID-19 Epidemic, China Kadoorie Biobank, Epidemiological Research on Infectious Diseases, Healthy Ageing, Colorectal Cancer Prevention and Control, Prevention and Control of Hepatitis B, Quality Assessment of Cancer Screening Guidelines and Consensus, The 40 th Anniversary of Chinese Journal of Epidemiology , Expert Forum, Review, Standard-Protocol-Guide. The total citation frequency was 3 951, accounting for 72.6% (3 951/5 438) of highly cited papers. Conclusions: In the past four years, the highly cited papers of this journal mainly focused on the research field of emerging infectious diseases and chronic diseases. The response to the 2019-nCoV epidemic highlights the academic leading role. The effect of selecting and planning a topic, commissioning authors to write on given topics and making an arrangement in advance with a subject for contribution to vital Contents in Brief or unique Contents in Brief of this journal is pronounced, and the academic influence of the journal continues to improve.

A total of 479 government procurement contract announcement and 402 original contract texts for paper resources were collected and sorted from the "Government Procurement Contract Announcement System" of the China government procurement network in Double First-Class university libraries. Through statistical and textual analysis, this paper provides a comprehensive analysis of government procurement contracts for paper resources in double-class university libraries. It examines the overall situation and key terms of these contracts, identifies existing problems, and incorporates the latest laws, regulations, and business practices. It presents several optimization suggestions for the standardized management of government procurement contracts for paper resources in university libraries in China. These suggestions include: standardizing the process of signing and announcing contract information, avoiding the indiscriminate application of contract model text, strengthening the compliance review of contract amount/ price terms, refining product quality service standards and breach of contract liability terms, clearly stipulating settlement and payment terms, and refining the performance acceptance terms. These suggestions aim to provide a useful reference for improving the management of government procurement contracts in university libraries. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to fully consider the random variation of sieving process parameters,this paper constructs the reliability-based optimization model for reconstituted tobacco process parameters,which taking the percentage of fibers below 12 mesh as the optimization objective,water flow rate and pulp concentration as the design parameters, and the percentage of fibers over 50 mesh as the probabilistic constraint. Firstly, the current process parameters are used as inheritance points for Latin hypercube sampling and screening experiments. Based on this, an initial Kriging model is constructed to fit the implicit relationship between water flow velocity, smoke slurry solid content, and the proportion of fiber mass below 12 mesh and above 50 mesh. And local adaptive sampling (LAS) was carried out to update the Kriging model to ensure the approximate accuracy of key positions at optimization iteration. Finally,Monte Carlo simulation (MCS)-Sequential quadratic programming (SQP) was used to solve the optimization model of screening process parameters. The results indicated that the optimized water flow rate and pulp concentration were 6.31 L/ min and 0.53%, respectively. Under this process parameter, the proportion of fiber below 12 mesh was 13.72%, which was 7.19% higher than before optimization. The proportion of fibers over 50 mesh was 17.65%, which was a decrease of 4.13% compared to before optimization. This method could meet the optimization requirements of screening process parameters for paper making reconstituted tobacco leaves. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to fully reveal the characteristics of university library service innovation and provide enlightenment for the development of library science theories and based on analysis on CSSCI papers of case studies on university library services from 2020 to 2023, the article analyzes the characteristics of innovative service from the dimensions of types, themes and ideas, sorts out the innovation path, and discusses the essence of innovative service of university library. The results show that innovation is most active in basic services and comprehensive services, while the ten “Double First-Class” university libraries holding a higher number of innovative service cases. Among the popular innovation themes, popularity of topics such as reading promotion and information literacy education continued, while topics such as emergency services had a clear trend of concentration and significant characteristics of the times. The highly cited innovation case papers cover multiple topics but tend to be consistent in nature in terms of collaboration, multi-resource structure, and new media application. The essence of service innovation is to seek the best match between resources and needs, while technology is a tool to match resources and needs. [ABSTRACT FROM AUTHOR]

Banana fusarium wilt has a significant adverse effect on the banana industry. It is worth noting that fusarium oxysporum f.sp. cubense 4(Foc4) is one of the most devastating and widespread pathogens of banana fusarium wilt in the world. It is a catastrophic threat to the global banana industry. At present, there is still no technology that can cure bananas infected with banana fusarium wilt. Therefore, it is extremely important for banana planting industry to detect banana fusarium wilt in time and do a good job in prevention and control. In order to realize the early accurate detection of banana fusarium wilt race 4, this study proposed a detection method of double probe paper-based sensor based on colloidal gold, which increased the use of signal enhancement probes to increase the binding amount of colloidal gold, thereby reducing the detection limit. Two kinds of colloidal gold particles with different particle sizes were combined with the corresponding detection probes and signal enhancement probes to form a double gold label probe system. The large particle size colloidal gold was used with the detection probe, while the small particle size colloidal gold was paired with the signal enhancement probe. The sample being tested was mixed with this double gold-labeled probe system. The Foc4 target sequence in the sample would be paired with the double gold-labeled probe to form a ' gold-labeled probe-target sequence-T-line probe ' complex, which continued to migrate to the water-absorbing pad. The complex was captured on the test area of the sensor. Within 10 minutes, the test paper would generate a visible target product that could be observed by the naked eye at both the test line and the quality control line areas, thus achieving qualitative detection. For quantitative detection of Foc4, the light intensity of the test strip would be further analyzed using software. The light intensity peak area was obtained and substituted into the standard curve to obtain the concentration of Foc4 detected and realize quantitative detection. Experimental results demonstrate that the detection limit of the dual-probe paper-based sensor is 0.001 nmol/L, which is 100 times of that of the traditional paper-based sensor, and the detection sensitivity is improved. The sensitivity test results demonstrated a strong linear relationship between the concentration of Foc4 and the peak area of the test line light intensity within the concentration range of 0.001-1 000.000 nmol/L. This finding suggests that the sensor can be effectively employed for quantitative detection. To assess specificity, a high concentration of non-complementary probe was utilized as the target sequence for detection and compared with the detection results of samples containing Foc4. The experiment revealed the absence of a red band at the test line when the test paper was detected by the noncomplementary sequence. Importantly, this observation indicated that the presence of the non-complementary sequence had minimal impact on the detection effect, thus affirming the sensor's excellent specificity. Finally, the paper-based sensor was used to detect Foc4 in banana leaves. The average recovery rate was 77.6%-102.3%, and the relative standard deviation was 7.4%-7.7%, indicating that it can be used for on-site detection of Foc4. The detection technology possesses the characteristics of being low-cost and easy to operate. In comparison to traditional detection methods, it enables timely, rapid and accurately determination of the presence of Foc4. Compared with the existing molecular detection technology, the detection can be completed without the need of expensive equipment or specialized personnel. This feature makes it highly suitable for widespread use. The dual-probe paper-based sensor realizes the combination of nucleic acid lateral chromatography detection technology and banana fusarium wilt detection. Its potential for widespread adoption in the early disease warning system of the banana industry is substantial. Furthermore, this technology can be combined with traditional polymerase chain reaction (PCR) and other techniques to facilitate on-site detection of Foc4. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Considering the uncertainty of market demand, the uncertainty of the number of returned products and the risk of facility interruption, the carbon quota policy and the construction of new energy facilities are taken as the key factors affecting the decision-making. A dual-objective robust optimization model with minimum total cost and carbon emissions of supply chain network is established, and a Prim-NSGA II algorithm is designed to solve the model. The effectiveness of the algorithm is verified by comparing with the IGD and SM indexes of the traditional NSGA II algorithm. The optimal network planning scheme under different uncertainties and the management countermeasures under different parameters are obtained. The results show that the algorithm achieves the purpose of accelerating the convergence speed and maintaining the diversity of the population. It is verified that the robust optimization model can realize the comprehensive improvement of the robustness, economic and environmental benefits of the closed-loop supply chain network, and provide decision-making basis for decision makers to formulate specific carbon emission reduction schemes. [ABSTRACT FROM AUTHOR]

Traditional federated learning faces challenges such as high communication costs, structural heterogeneity,and insufficient privacy protection. To address these issues, this paper proposes a federated learning evolutionary algorithm that applies sparse evolutionary training algorithm to reduce communication costs and integrates local differential privacy protection for participants’ privacy. Additionally, it utilizes the NSGA-Ⅲ algorithm to optimize the network structure and sparsity of the global federated learning model, adjusting the relationship between data availability and privacy protection. This achieves a balance between the effectiveness, communication costs, and privacy of the global federated learning model. Experimental results under unstable communication environments demonstrate that, on the MNIST and CIFAR-10 datasets, compared to the solution with the lowest error rate using the FNSGA-Ⅲ algorithm, the proposed algorithm improves communication efficiency by 57. 19% and 52. 17%, respectively. The participants also achieved（3. 46, 10-4） and（6. 52, 10-4）-local differential privacy. This algorithm can effectively reduce communication costs and protect participant privacy without significantly compromising the accuracy of the global model. [ABSTRACT FROM AUTHOR]

Copyright of Packaging & Food Machinery is the property of Packaging & Food Machinery Magazine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Combining the laser interferometry system, using the newly developed experimental device at medium strain rates to conduct the dynamic loading experiment of paper honeycomb structure. The purpose is to study the mechanical properties of paper honeycomb structure at medium strain rates. The deformation process and dynamic failure mechanism of paper honeycomb structure were obtained by high-speed photography and digital image correlation method. Numerical methods were used to further explore the dynamic failure mechanism. The results show that the paper honeycomb structure exhibits obvious strain rate effect. The yield strength of 2.10 mm thick paper honeycomb is obviously lower than the other three sizes, showing abnormal size effect. The descending section of stress-strain curve of 2.10 mm thick paper honeycomb is also different. The main reason for it is that the failure mode of paper honeycomb structure changes with the increase of sample size. The failure mechanism of paper honeycomb structure during the loading process at medium strain rates is the change of two failure modes, namely from out-of-plane buckling to in-plane shear. The effect of cell width on mechanical properties of the structure was analyzed by numerical model. This study is a good reference significance for the optimal design of thin-walled structures. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The study aimed to explore the nutritional value of sea buckthorn by-products and the antibacterial effects of their extracts on Escherichia coli. The experiment employed the sodium nitrite-aluminum nitrate method to determine flavonoid content, while alcohol extraction and water extraction methods were used to extract active substances from sea buckthorn by-products. The antibacterial effects of sea buckthorn by-product extracts on Escherichia coli were investigated by the filter paper method, perforation method, and broth dilution method. The results showed that the dry matter (DM) content of sea buckthorn by-products was 97.98%, ash content was 3.41%, crude protein (CP) content was 12.87%, and crude fat (EE) content was 22.48%. With the increase of sea buckthorn by-product addition, gas production showed a decreasing trend. Among alcohol extraction and water extraction methods, the constant broth dilution method exhibited the best antibacterial effect. In the alcohol extraction method, the filter paper method showed good antibacterial effect with an inhibition zone of 14.6 mm. In the water extraction method, the filter paper method did not exhibit a significant inhibition zone, and the perforation method was not significant in both alcohol extraction and water extraction methods. The study suggests that sea buckthorn by-products have rich nutritional value, and alcohol extraction is more effective in inhibiting Escherichia coli compared to water extraction. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)