铁炭微电解深度处理废纸造纸废水的参数 优化及其效果研究.

Utilizing the iron-carbon microelectrolysis technology to carry out in-depth treatment of waste paper and pulp wastewater, the optimal process parameters were determined based on single factor experiments. In addition, the response surface methodology was employed to optimize the process parameters by analyzing the experimental results. Under the optimized conditions, the excita1tion-emission-matrix spectra and GC-MS were used to analyze the water quality of the treated wastewater. The results showed that the optimal treatment conditions of iron-carbon microelectroly1sis process were initial pH=3.0, filler addition amount 255g L-1, reaction time 120 min, aeration amount 0.9 L min-1, and the COD removal efficiency was 32. 14% under these conditions; the maximum predicted value of COD removal rate calculated under the optimal process conditions was 34.57% from the response surface analysis, which was basically consistent with the experimental results. The results of excitation-emission-matrix spectra analysis showed that the iron-carbon micro1electrolysis process was effective in degrading humic acid and fulvic acid in waste paper and paper wastewater, and GC-MS analysis showed that the relative content of eicosanoids in wastewater was reduced from 43.31% to 4.79% of the original water after the iron-carbon microelectrolysis treat1ment, but a small amount of new pollutants were generated at the same time. [ABSTRACT FROM AUTHOR]