Search

The article discusses jointer and a planer as key to successful woodworking. It is noted that working in tandem, jointers and planers allows one to create properly prepared lumber in much less time than it would take to prepare it the same way with hand tools. They perform completely different jobs that are integral to stock preparation. Jointers flatten wood. Planers surface wood to make it thinner.

The article offers step-by-step instructions for making Segmented Bowl.

A personal narrative is presented which explores the author's experience of using colorful epoxy resin to fill in the voids in cool-looking but otherwise questionable lumber is a hot trend.

The article offers step-by-step instructions of Hemlock.

In this article, the author presents instructions for designing a dining room table for four by using a slab of cherry lumber.

The article reports that Rockler store, a Denver Store Celebrates Grand Opening with major lumber expansion nearly doubles store size and provides one-stop shopping convenience. Topics include Denver's expansion showcases Rockler's intention to offer more lumber in its network of stores nationwide; and Rockler stores sell the majority of in-store lumber by the board foot, and staff can crosscut most boards to specific lengths.

The article presents questions and answers related to woodworking including the use of composite lumber for birdhouse, the use of finishes on a coffee cup, and adjusting handheld jigsaw.

The article understanding the importance of Lumber Lingo. Topics discussed include , green wood is often preferred by woodturners or those who wish to steam bend boards. Cured lumber is preferred for almost everything else; and Logs from which lumber is sawn from are round in section, and the boards are generally rectangular in section.

The article focuses on making a portable walnut game table. It is made of walnut and maple wood. The table is storable and sturdy so as not to wiggle during the game and the drinks are not spilled. For the top of the table, the router bit was selected. To prepare the lumber, the oversized blank was glued.

The article focuses on the modern makeover of a traditional country table. It mentions that wenge hard wood has splinters on the edges. It states that the cleats, legs and feet of the country table, which shapely support the table top uses an open mortise joint. It cites the materials needed for the makeover which includes the wedges, tops, and stretcher. Moreover, dark wenge which is emphasized by cherry lumber looks sophisticated.

The article presents information on uses of the outdoor job toolkit. Information on several tools including battery-powered cordless tools, cordless drills and drivers, cordless hammer drills and impact drivers are presented. A Portable Circular saw is described as a real carpenter's workhouse, as it is the perfect tool for cutting construction lumber and well as for trimming. Reciprocating saws form an essential tool for remodelers and carpenters doing home demolition work. Portable table saws are very efficient for many outdoor building projects because its light and compact.

The article offers step-by-step instructions for surfacing stock.

This article focuses on cutting with the help of table saws. Safe table saw techniques will ensure years of enjoyable woodworking. While cutting solid lumber, one should set the fence to the width of the cut and place one's push sticks so they are within easy reach when they are needed. As one approaches the table saw, one must press one's hip against the edge of the table to anchor oneself and keep one's balance. The table saw is a great way to cut accurate miters. It is important never to capture one's workpiece between the fence and the saw blade. INSETS: BEFORE YOU BEGIN;Blade Height.

This article focuses on the challenge given by Lawrence Szymanski, teacher at the John Adams High School, to the author to design and build a table that met three criteria. First, the table had to be easy to make. Second, no more than 10 board feet of lumber in the finished form was to be used. That's tough because of their third challenge: no straight visible edges. Any knot-free hardwood will work for this project, so the author picked some of that nicer stock. Hardwood is definitely a better choice than softwood for this project.

Focuses on the desk manufactured by the author, who is a professional woodworker. Information that the desk featured a flip-down lid with breadboard ends, divided upper case and graceful, tapered legs; Use of pommelle sapele lumber by the author for manufacturing the desk; Need for blending the wood grain and jointing the panel parts.

In this article the author presents information on benchtop planers used in woodworking. Just the other day the author bought some 4/4 red oak lumber for a project, and the receipt reminded him why he loves his benchtop planer. Many are loaded with features, including dust hoods and cutterhead locks to help reduce that planer bugaboo called snipe. Knife changing is generally a snap, and the blades are double-edged so you can flip them once before they need to be replaced. To perform an "acid test" on these machines, he used hard maple for test lumber. Then he checked to see if the planer bed and cutterhead were parallel to one another by running a pair of test strips through, with the strips following the edges of the planer bed. INSETS: Snipe: Has it become a thing of the past?;Planer/Jointer Combos.

The article describes the design and construction of rolling lumber cart that organizes lumber including sheet stock in an incredibly compact space. It offers more than 70 square feet of shelf space, a separate compartment for storing sheet goods and a roomy bin on top for cutoffs. Heavy-duty shelf standards and brackets keep it all high and dry. The construction of lumber cart includes starting with base to assembling the cutoff bin, wrapping things up by adding hardware and finally making of the rack.

The article informs about Guibourtia tessmannii, a convincing substitute for rosewood, with beautiful lumber is CITES protected. Topics include Bubinga is wood derived from trees in the genus Guibourtia, named after the French pharmacologist Nicholas Jean Baptist Gaston Guibourt; and Cameroon, Equatorial Guinea, Central African Republic, Gabon and Democratic Republic of the Congo.

The article offers step-by-step instruction for dealing with bark inclusions and voids in slab lumber.

The article offers tips for avoiding tear-out in the woodwork. It mentions that flatsawn lumber has the easiest grain and can tear excessively if tried against the grain. It offers information on quartersawn stock which is opposite of flatsawn where the growth rings ran perpendicular to the face. It offers information on the advantages of shallow cutting passage.

The article offers the author's insights on how to make bowls from kiln-dried wood using a chainsaw. He mentions that log shrinks up to 8% along the annural rings and over 4% in radial plane at the right angle of the annural rings. Moreover, he provides chainsaw safety tips which include avoiding the use of chainsaw alone, ensuring the chain is sharp, and cutting at a high throttle profile.

The article offers information on woodworking lumberyards often carry unsurfaced hardwoods to expect when buying these diamonds in the rough. Topics include the hardwood lumberyards stock roughsawn lumber, the grain pattern and color consistency is important to your project, and the upside to roughsawn lumber is that it's generally more economically has priced than if it were pre-surfaced smooth and flat.

The article focuses on Rockler responds to customer demands for lumber by expanding these resources in select stores. Topics include the views of Joe Kester, vice president of retail at Rockler, on the country there has been a significant increase in our customer demand for quality lumber to support home improvement and woodworking, and the goal is to make visiting a Rockler store an even more complete one-stop destination for project needs.

The article offers information of the sources which should keep in mind which can save you money and expand your options while sometimes also uncovering some truly extraordinary material.

The article presents the questions and answers related to board a home center or lumberyard is planed down and smooth to sand it again before applying a finish to it, and warnings got to checked garage every few hours to make sure house wasn't burning down.

The article offers information on determining lumber quantity for a project isn't difficult with the right formula. Topics include the hardwood lumber is sometimes milled to dimensional sizes but is more commonly found in random widths and lengths, and the sold as rough sawn lumber and in variable surfacing options with letter and number codes.

The article offers exiting ideas of upcycles that reduce slipping including Yoga Mat rolls up conveniently for storage, and improve Mover's dollies can come in handy for moving large projects around the shop when working alone.

Some folks don' t like the characteristic black pitch pockets, tiny pin knots and creamy-colored sapwood that are allowed in top quality cherry lumber. I am, in fact, such a fan of this wood that I am flabbergast- ed that some woodworkers shun cherry as Black cherry lumber is one of our most coveted furniture-grade hardwoods. [Extracted from the article]

This article presents information about various suppliers of woodworking supplies such as lumber, adhesives, project plans, hardware and finishing supplies. Ameridoor Industries Corp. is a full-service cabinet door and drawer supplier. Berea HardWoods supplies writing instrument kits. Blum Inc. is a supplier of drawer slide hardware, concealed hinges and organizers. Briwax Woodcare Products Range protects, restores and reconditions fine furniture. Creative Woodcraft Plans Ltd. supplies general project plans for woodworking.

The article offers step-by-step instructions for cutting stave jigs that are secured by taping.

The article offers step-by-step instructions for creating refrigerator magnets made with lumber using pen turning jaws.

The article presents several tips and tricks to save time and money while working with wood. The power and hand tools should be used with safety guards to develop safe woodworking. The lumber boards should be labeled on the edges in order to identify the lumber species later. To avoid slack-jawed clamps, a rubber band can be installed over the jaws of bar clamps.

The article focuses on the threat caused by emerald ash borer on the ash trees in the U.S. It relates the importance of ash lumber in the American furniture industry, due to its availability, flexibility and cost effective compared to other hardwoods. However, it is vulnerable to the imported exotic pest, found in various states around the country, as well as in Canada, but its abundant supply in the market is one of the determining factor for other lumber to reduce its prices.

The article presents a woodworker's views on the different ways to work on maple lumber. This type of lumber is the most widely used species. The woodworker during his youthful days developed a sort of love-hate relationship with maple lumber. The woodworker appreciates the grain patterns and figure of a maple lumber. The woodworker suggests a way to finish flame maple. INSET: Acer saccharum.

The article presents the findings of an online survey on whether the concept of green woodworking makes any difference to woodworkers and, whether they act in an environmentally responsible manner. It was found that sustainably harvested lumber does not rank high on the selection criteria of woodworkers. More than half of those surveyed did not know about forest certification programs. 40% of the woodworkers surveyed, believed that woodworking has very little impact on the environment.

The article presents several tips on the use of equipment tailored for outdoor jobs is presented. A pair of sturdy work gloves protects from embedding wood in the skin, and they keep blisters to a minimum. It is important to wear a dust mask when machining pressure-treated lumber. Knee pads can save from a lot of pain or possibly even a fall. Wearing a back brace prevents strains when spending a day of lifting heavy lumber and schlepping power tools. A hardhat must be worn to protect while working, where tools or lumber might fall from overhead.

Presents questions and answers related to bit prices and lumber dimensions used in the woodworking industries.

The article offers a brief history of black walnuts which is also known as Eastern black walnut and American walnut. It mentions that blacks walnuts are originally found throughout the Eastern U.S. and most often occupies fertile soils where early settlers keyed on the walnut groves as indicators of the best soil for farming. According to the U.S. Department of Agriculture's (USDA) Silvics of North America, walnut is one of the scarcest and most coveted native hardwoods.

The article offers information on genus Fraxinus, one of the most abundant plant species around the world. This plant consists of more than 40 varieties in the world, wherein over 14 of its types can be found in Northern America. Meanwhile, the commercial species in the U.S. include black and white ash, pumpkin ash, green and white ash which are the most common. Moreover, ash is used as veneer and in cabinets, furniture, flooring, millwork and is priced lower compared to red and white oak.

The article features Castanea dentata, a narrative range of American chestnut. U.S. chestnut plantation spans from Massachusetts to Indiana. Chestnut was considered the "Eastern Giant" since it historically stood over a hundred feet tall and was as broad as seven feet in diameter. American chestnut makes up 25 percent of lumber sales for the Appalachian region though it never surpassed one percent of the U.S. total hardwood lumber output. Its wood has also been proven for its durability.

Presents the author's solutions to questions raised by woodworkers in the periodical "Woodworker's Journal." Identification of a device used for holding pencil and glasses; Explanation of the difference between planing rough lumber and surfacing done by a mill; Description of the S2S and S4S softwood and hardwood material.