Search

• A novel bi-material multistable auxetic honeycomb (BMAH) with reusable and enhanced energy-absorbing phases was designed. • The crushing stress–strain curve shows three stress plateaus, and BMAH maintains a stable Poisson's ratio even at high strain levels, transitioning from near-zero to negative and then to positive. • Under the selected material combination, the second stress plateau is 8 times greater than the first, and the third stress plateau is 17 times greater than the first, significantly improving energy absorption efficiency. • A theoretical model was established to reveal the deformation mechanism of BMAH and predict the plateau stresses and strain range for each deformation stage. • Effects of geometrical parameters and crushing velocity on BMAH stress plateaus and Poisson's ratio were investigated, and a programmable guide for designing stress plateaus and specific energy absorption is presented. The ideal energy absorption structures, in addition to possessing reusability and high energy absorption efficiency, should also possess multiple desired properties to fulfill various functional applications. In this study, a bi-material multistable auxetic honeycomb (BMAH) is fabricated by using bi-material 3D printing technology. Under in-plane crushing, multiple stress plateaus can be achieved and the Poisson's ratio can be stably tuned, allowing for a transition from near-zero to negative and then to positive. The above characteristics are attributed to the specimen's multi-path deformation. The first stress plateau is only associated with recoverable elastic deformation. The second and third stress plateaus, which are 8 times and 17 times higher respectively than the first, are associated with plastic deformation, significantly enhancing energy absorption efficiency. The deformation mechanism is theoretically analyzed, and the effects of geometric parameters on the performance of BMAH are investigated. In addition, the effect of crushing velocity on the crushing behavior of the BMAH is also discussed. As the crushing velocity increases, the total number of stress plateaus transitions from three initially to two and then to one. The developed BMAH exhibits significant potential applications in multi-stage energy absorbers and smart sensors. [ABSTRACT FROM AUTHOR]

• The proposed auxetic honeycomb possesses more excellent auxetic behavior and specific energy absorption than the conventional honeycomb. • The interaction between the structural parameters is analyzed. • The multi-objective optimization of the enhanced auxetic honeycomb (EAH) was investigated. • The theoretical model and Box-Behnken Design model were used to predict the mechanical properties of EAH. In response to the challenge of low stiffness and energy absorption capacity, various designs of negative Poisson's ratio (NPR) structures have emerged. However, these designs often lack a comprehensive analysis of other mechanical properties, leading to subpar mechanical performance. Previous studies have explored the mechanical properties response of enhanced re-entrant honeycombs (ERH) under impact conditions, revealing limitations in optimizing the structure's performance with a single objective. Therefore, this study aims to enhance ERH structural parameters to achieve superior mechanical performance through theoretical derivations and geometric optimizations. The results demonstrate that the proposed theoretical model is consistent with finite element analysis and response surface (RS) predictions. Expressions for Young's modulus, specific energy absorption, and compressive strength are proposed, facilitating the identification of structural parameters that meet specific requirements during reverse design. Furthermore, a multi-objective optimization approach optimizes the geometric parameters based on maximum energy absorption and compressive strength. The mechanical behavior of the optimized ERH is investigated using the finite element method, revealing the energy absorption capacity of 13.78 J/g while maintaining Poisson's ratio at -1.06. Additionally, the deformation mode of the optimized structure showcases enhanced stability compared to traditional honeycomb structures. The theoretical model and RS method were used to guide the design of ERH and promote the application of NPR structures. [ABSTRACT FROM AUTHOR]

Sandwich panels/sacrificial cladding systems composed of an auxetic core sandwiched between two faceplates can be considered an effective protective measure for reinforced concrete structures from blast loads. In this study, the effectiveness of re-entrant honeycomb core sandwich (RHS) protective panel systems, which exhibit a negative Poisson's ratio, to protect one-way simply supported reinforced concrete (RC) slabs subjected to a close-range detonation from high explosive charges was experimentally evaluated. Three large-scale field blast trials were carried out, namely an RC slab without protection as the reference test and two RC slabs with RHS protective systems under similar blast loading conditions. The RC slabs with RHS protective systems experienced catastrophic failure, unlike the unprotected reference slab that experienced only localised concrete damage. LS-DYNA numerical models were validated and agreed well with the experimental results. It was demonstrated that the transferred blast impulse to the main structure can be magnified by a factor of 1.6 by using an RHS protective system compared to an unprotected structure. Furthermore, the effect of the mass of the protective system was numerically studied. The numerical results showed that the blast protection level of the main structure is governed by the inertial resistance of the protective system rather than through energy absorption of the auxetic honeycomb core structure. • Response of RC panels protected by auxetic sandwich panels to close-in explosion is investigated experimentally and numerically. • The damage magnification effect of the auxetic sandwich panels is captured experimentally which has not been reported so far. • The impulse transferred to the main structure could be magnified by a factor of 1.6 compared to the unprotected structure. • The duality of energy absorption and inertial resistance of auxetic protective systems need to be considered at close standoff distances. [ABSTRACT FROM AUTHOR]

Double arrowed honeycomb (DAH) is a typical auxetic material with negative Poisson's ratio (NPR) and excellent mechanical properties, showing a wide application prospect in aerospace, marine, automotive and other fields. In this work, we introduce the double circular arc walls into the regular DAH unit cell to improve the strength and energy absorption capability of the material. According to the position of the arc wall, three circular double arrowed honeycomb (CDAH) unit configurations were proposed, including upper-circular (U-type), lower-circular (L-type), and full-circular (F-type). The prototype specimens of DAH and CDAHs were fabricated by 3D printing and tested under quasi-static crushing. The finite element (FE) models of the specimens were established and validated by the experimental results. The experimental and numerical results showed that the three types of CDAHs have higher crushing stress, crush force efficiency (CFE) and specific energy absorption (SEA) than the DAH with the same geometric parameters, which is due to the formation of more plastic hinges at the joints and the middle of the arc walls. Specifically, the CFE of L-type CDAH is 25.8% higher than that of DAH, and the SEA of F-type CDAH is 85.9% higher than that of DAH. The detailed parameter analyses of CDAH revealed that small short inclined wall angle and lower circular arc radius, and large friction coefficient value, long inclined wall angle and cell wall thickness all lead to large SEA. Among the three types of CDAH, the U-type has the greatest SEA and the most NPR effect under the same relative density. Finally, a wide range of SEA and Poisson's ratio of the CDAH can be obtained by rationally designing the arc wall position and the geometric parameters of the unit cell. [Display omitted] • Quasi-static crushing behaviors of three novel types of circular double arrowed honeycombs (CDAHs) through experimental tests and numerical simulations. • More Energy absorption than regular double arrowed honeycomb (DAH) due to formation of more plastic hinges of arc walls. • Good agreement between experimental and numerical results in terms of deformation mode, crushing stress and specific energy absorption (SEA). • Effects of cell number, geometric parameter and relative density on crushing responses of CDAHs. [ABSTRACT FROM AUTHOR]