Search

Bi1-xMgxFeO3 (BMFO, x = 0, 0.02, 0.04, 0.06 and 0.08) multiferroic films were directly synthesized on flexible stainless steel (FSS), save the bottom electrode process, by means of sol&ndash, gel spin-coating technology. The effects of different bending conditions on ferroelectric, dielectric and leakage-current properties of BMFO films were investigated. The leakage-current densities of BiFeO3 (BFO, x = 0) and BMFO (x = 0.06) films were 5.86 &times, 10&minus, 4 and 3.73 &times, 7 A/cm2, which shows that the BMFO (x = 0.06) has more than three orders of magnitude lower than that of BFO film. The residual polarization (2 Pr) can be enhanced from 120 to 140 &mu, C/cm2. The proper doping of Mg in BiFeO3 film could provide an effective method for reducing the leakage-current values as well as boosting the ferroelectric properties. In this study, the leakage-current mechanism of low electric field and high electric field of BMFO film is analyzed and established. In addition, the flexible BMFO film maintains practical ferroelectric and leakage-current properties at retention time of 106 s under different symmetry bending conditions. These results indicate that the BFMO film will be very practical in opto-electronic and storage device applications.

Zn1&minus, xMgxO (x = 0, 0.03, 0.05, and 0.07) nanocrystalline films were grown on silicon substrates using the sol&ndash, gel method. Furthermore, Zn1&minus, xMgxO vertically aligned hexagonal symmetrical nanorods with six reflection symmetries were fabricated on pure ZnO-seeded layer n-type silicon substrates via a low-temperature hydrothermal method to enhance the ultraviolet (UV) light response. The crystal microstructures and surface morphologies of nanocrystalline films and nanorod arrays were determined by X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). Transmission spectra showed that the increasing Mg content will increase the band gap energy from 3.28 to 3.46 eV. However, the current&ndash, voltage curves in the dark and under UV illumination showed that the UV response did not improve by the incorporation of magnesium. We changed the flat surface of films into symmetrical nanorod arrays and demonstrated they can significantly enhance the normalized photo-to-dark-current ratio up to ten times.