Search

Light microscopic examination of the structure of seed testa of snap and semihard bean seeds with 6% and 12% moisture contents in paraffin sections was unsuccessful because of poor paraffin infiltration and subsequent separation of subjacent and palisade cell layers. We devised an alternative method using polyethylene glycol (PEG) as the embedding material. Specimens were killed and fixed in the usual manner. They were then run up through a graded series (25, 50, 75, 100%) of PEG 1000 to PEG 1450, and finally embedded in a mixture of PEG 1450 and 4000 (19:1 by weight). Transverse and longitudinal sections retained excellent morphological detail and were suitable for histological study. Sections temporarily stained with 0.025% thionin allowed good quality photomicrographs.

Column and paper chromatography of four thiazin dyes revealed both inorganic and organic impurities. In thionin, azure A, azure B and methylene blue, sodium and other metal cations were found as inorganic impurities. The analysis for organic impurities revealed that the dyes were mixtures; specifically each dye contained one or more of the other dyes as impurities. Inorganic impurities were detected by ashing the dyes in the presence of H2SO4 and chromatographing the sulfate salts on paper. They were removed by filtration through ion exchange resins. Organic impurities were detected by paper chromatography and removed by column chromatography on Woelm's neutral alumina.

Supravital staining by thiazins of segments of small intestine and mesentery of young dogs was studied with reference to specificity for nervous tissue. Attempts to secure a purer form of methylene blue by alumina adsorption and alcohol elution of the commercial, medicinal dye yielded a product which appeared to be structurally different from the original dye. The treated dye had absorption maxima from 620 to 655 mμ in contrast with 665 for the untreated. Small nerve bundles were stained by the treated dye after 2 to 4 hours of immersion, but staining was always incomplete. Staining by untreated methylene blue was compared with that by the leucobase, thionol, methylene green, toluidine blue, new methylene blue and the azures. It was concluded that the specificity for nerve fibers resides mainly in the =N(CH3)2Cl radical, although some specificity appears to be effected by the methyl groups on the trivalent nitrogen, since azure A (dimethyl) and azure C (mono-methyl) stained weakly, but thionin did not. Me...

The mechanism of the oxidation of methylene blue varies with the conditions. The formation of trimethyl thionin (azure B) and of asymmetrical dimethyl thionolin (azure A) is followed under alkaline conditions by that of dimethyl thionin (methylene violet) and under acid conditions by that of monomethyl thionin (named by authors azure C).Simple and practical methods are given for the preparation of azure A and azure C. The latter product, which has not been obtained from methylene blue hitherto, has valuable staining properties as a nuclear and bacterial stain in tissue and may also be employed satisfactorily as a substitute for azure A in the MacNeal tetrachrome formula as a blood stain or substitute for the Giemsa stain.Azure B has no particular merit in staining.Azure C proves to be a very valuable stain. A procedure is given for its use with eosin Y and orange II as counterstains, by which it is possible to demonstrate bacteria in tissue and at the same time the cytological elements of the tissue.

A mixture containing thionin, 0.5 gm; paraldehyde, 7.5 ml; concentrated HCl, 1 ml; and 70% ethanol, 91.5 ml, when allowed to ripen for several days, produces a stain which, when applied to sections of tissue fixed in a Zenker-based fixative, resembles in its effects the aldehyde-fuchsin stain of Gomori, but presents certain advantages.

Thin sections of leaves and anthers of Beta vulgaris L., fixed in glutaraldehyde-OsO4 and embedded in epoxy resin, were stained with different stains at pH ranges from 5 to 9 at 50 C to select those that provided polychromatic staining of suitable intensity. The thionin derivatives, Azure B, Toluidine Blue O, and polychrome Methylene Blue provided adequate staining, as did the commercially prepared stain Paragon PS 1301. Azure B stain was superior for sugar beet 0.5μ monitor sections: cytoplasm appeared grey; nuclei, blue-gray; nucleoli, blue; chloroplasts, blue-green; primary walls, blue; and secondary walls, light blue. Choice of one of the stains mentioned probably would depend upon the plant material under study.

Experiments were performed in an attempt to obtain a rapid method for staining the chromophilic substance of formalin-fixed nerve cells differentially without resorting to over-staining and subsequent acid-decolorizing. A satisfactory procedure using thionin in dilute buffered solutions was developed: Prepare a stock solution of the dye using 1 g. in 100 ml. of distilled water. Prepare veronal-acetate buffers (Michaelis, 1931) in the range of pH 5 to pH 3.S. To each 10 ml. of the buffer add 0.5 ml. of the stock dye solution. After rinsing in CO2-free distilled water place mounted or unmounted sections in this solution. (Freshly fixed material, 10μ to 20μ thick, is completely stained in 10 to 20 minutes but over-staining does not occur when longer times are allowed.) Return sections to distilled water (2 changes) and wash until diffusion of excess dye is no longer visible. Wash in 70% ethyl alcohol (2 changes) until diffusion of excess dye is no longer visible. Dehydrate in 95% ethyl alcohol and normal but...

An investigation has been made of the staining properties of eight dyes of the thionin group. The dyes studied are as follows: tetra-ethyl thionin, asymmetrical di-ethyl thionin, tetra-methyl thionin (methylene blue), tri-methyl thionin (azure B), asymmetrical di-methyl thionin (azure A), symmetrical di-methyl thionin, mono-methyl thionin (azure C), and unsubstituted thionin. The staining properties were tested on sections of paraffin embedded material following five different methods of fixation. No counterstain was employed. It was shown that there was a general correlation between the extent of ethylation or methylation of the dyes and their staining properties. As one passes from tetra-ethyl thionin down the series to thionin itself, there is a progressive decrease in the amount of green showing in the preparations, and an increase in the amount of red present, also an increase in the metachromatic effects, and in the intensity of nuclear staining. There seems, also, to be a similar relation between s...

The effect of buffer solutions of varying reaction upon staining fixed sections with thionin, azures A, B, and C, and methylene blue has been studied. The buffer solutions were employed in one of three different ways: for pre-treatment of the sections, for post-treatment, or as solvents for the dyes. Regardless of the method of employing the buffer solutions it was found that the intensity of staining increased with increasing pH-values (a fact which is generally known to be true in the case of basic dyes). It is not certain whether this effect is due to varying the H-ion concentration or to altering the salt content of the solution, or to both. It was also noticed that there was one point where the staining intensify increased most rapidly. This point was either between pH 5 and pH 6 or between pH 6 and pH 7, its position varying with the method of fixation and of applying the buffer solutions. It was further observed that between pH 5 and pH 7 there were always more pronounced metachromatic effects than...

Paper chromatography with new solvents applied to some commercial samples of thiazine stains, especially azures, resulted in improved resolution which gave more spots than had been obtained with previously reported solvents. To a Whatman No. 1 filter paper strip, 50 cm in length, 0.08 ml of a 0.1% solution in water was spotted 18 cm from the edge of the strip. The solvent used in most cases was a mixture of t-butylalcohol, methylcellosolve and a 1% NH4Cl solution in distilled water (60:20:20, v/v) with the ascending technique. Several batches of thionin were found to have a high degree of purity (concerning their content of coloured components). One sample of thionin (Chroma) contained only one component (violet). The thionin-SO2 reagent showed a chromatogram with more spots than the thionin sample from which the reagent was prepared. Qualitatively a sample of azure A appeared to have practically the same composition as a sample of azure C. At least six spots were visible in the chromatogram of these azur...

Two new methods applicable to the staining of fixed and fresh frozen tissue sections are presented herein. In addition certain improvements are suggested for the technic reported by Geschickter, Walker, Hjort and Moulton (1931). In brief the procedures are as follows:The thionin eosinate method of Geschickter et al (1931). This procedure has been modified as follows:A mixture of diethylene glycol, 40 parts, ethylene glycol, 40 parts, and grain alcohol, 20 parts is superior to ethylene glycol, 80 parts, and ethyl alcohol, 20 parts, as a solvent for the compound stain in that the staining is intensified.Ethylene glycol monobutyl ether supplants diethylene glycol monobutyl ether because of its lower viscosity.Ethyl phthalate replaces butyl phthalate on account of a more satisfactory viscosity.The methyl green eosinate procedure is the same as the modified thionin eosinate method except for the following variations:The staining time is increased to one minute.Decolorization and washing are reduced to about 15...

The addition of buffer mixtures to toluidine blue O, thionin and new methylene blue N improves their use in the staining of mucus after formaldehyde fixation. Overstaining is minimi The buffer mixtures used consisted of variable proportions of M/10 citric acid and M/5 anhydrous Na2HPO4 in 25% methanol. Connective tissue mucus stained satisfactorily with these dyes at a buffer pH range of 3.4 and 3.95 and epithelial mucus at a range of 2.2 to 3.95. The corresponding ratios of M/10 citric acid: M/5 Na2HPO4 are 16:4 to 14:6 and 20 A to 14:6 respectively.

The light sensitivity of the leucobase of basic fuchsin was compared with that of a series of thiazines ranging from thionin to methylene blue. In the case of the thiazine series, a well-marked photooxidative effect, requiring the presence of dissolved oxygen, was observed. This effect was increased by methylation of the thiazine ring. Fluorescence also was seen under the Woods' lamp in members of this series. With basic fuchsin, neither of these effects was observed, and the pink color developed in the leucobase solution by strong sunlight was shown to be caused by heat, rather than by light.

High-performance liquid chromatography has been used to quantitate batch variations in commericial samples of thiazine dyes, thiazine eosinates, and Romanowsky-type blood stains. It has been observed that all the dyes and eosinates examined, only methylene blue chloride and thionin were reasonably free of their methylated, demethylated, or oxidized homologs. Large variations in composition were observed between most of the samples of each type examined. In several instances the labeled compound was a minority species. In one instance a dye was apparently mislabeled. Large compositional variation was found between various batches of Wright and Giemsa stains, whereas significant differences between the thiazine composition of these two stain types were minor. Very little compositional variation was observed between the lots of LARC stain examined. The thiazine composition of Ames stain was similar for the three lots examined. Ames stain, however, was found to contain several components of unknown composition which have been linked to degradation products formed when stains are aged in methanolic solution.

Two stains long used in exfoliative cytology, the hematoxylin-eosin Y and Papanicolaou stains, have not been standardized even today. Some dozens of hematoxylin and eosin and Papanicolaou staining recipes have been recommended in the literature. Consequently, the staining pattern of hematoxylin and eosin, and Papanicolaou stained cytological material varies from laboratory to laboratory. To a certain degree this is due to batch-to-batch variations of commercial samples of the natural dye hematoxylin (C.I. 75290). The present paper describes a simple, standardized and reproducible procedure using thionin bromide to replace hematoxylin in the hematoxylin and eosin stain.

The periodic acid/thionin-Schiff/potassium hydroxide/periodic acid/fuchsin-Schiff sequence developed by Culling et al. frequently causes damage to sections and gives inconsistent results because of insufficient primary oxidation and difficulties in making the thionin-Schiff reagent. These disadvantages have been largely eliminated by more thorough primary oxidation and by replacing the original thionin-Schiff with a new cold thionin-Schiff. The effect of alkaline hydrolysis on thionin-aldehyde complexes was also studied and the reduction of color caused by this treatment was restored by a second thionin-Schiff reaction. The new sequence gives consistent results and imparts greater color to the thionin-Schiff reaction.

Frequently used methods for the demonstration of cross-striations of muscle fibers are Mallory's phosphotungstic acid hematoxylin (PTAH) (Mallory 1939 and Heidenhain's iron hematoxylin (McManus and Mowry 1960). Both require long staining periods; in addition, Mallory's method specifies fixation or mordanting in Zenker's fluid. A modified Mallory's PTAH procedure has been developed to accelerate the staining of formalin fixed tissue (Bohacek 1966). Preparation of solutions and actual staining time are still lengthy. The method of Menzies (1961) using bromphenol blue, though no mordanting is required, specifies 4-24 hours staining. None of these techniques are practical when time is a major factor. This report describes a staining procedure which makes the differentiation of muscle cross-striations quick and reliable.

The need for rapid histological feedback on neural tissue is ever present. Although there are several stains which can be readily used for staining either cell bodies or fiber tracts, adequate contrasting stains which are both rapid and easy to apply are not generally available. In 1936 Chang presented a technique for whole brains utilizing the metachromatic properties of thionin. Unfortunately this procedure was very time consuming. For the last several years we have worked with several variations of this stain and have found that thionin can be reliably used as a polychrome stain for sections of neural tissue obtained from a freezing microtome.

A new staining method has been developed for the study of nerve cells and Nissl granules which combines three basic dyes, cresylecht violet, toluidine blue and thionin. The use of this tri-basic-dye stain results in finished preparations that are critically stained and permanent. Paraffin sections (4 μ sections preferably) are mounted on slides by the starch medium, deparaffinized and stained by the tribasic staining solution. After differentiation in acidified distilled water, sections are dehydrated, returned to stain solution and again dehydrated, then cleared and mounted in Clarite. Various vertebrate material including normal and pathological human tissues have been stained with this triple dye solution. Especially for pathological material, re-immersion of slides in the staining and 80% alcohol solutions before mounting, differentially intensifies the staining reaction. Fixatives used were 10% formalin, 95% alcohol, Bouin and formalin-Bouin (10% formalin followed by Bouin).

A modified thionin staining procedure was used to identify the pathologic cytoplasmic bodies of Tay-Sachs disease in situ and in cell-free preparations. This technic was used to follow these particles through an isolation procedure. Unfixed smears of tissue suspensions, or sections of plastic-embedded tissue or tissue fractions, were stained directly. The slide was flooded with Laskey's thionin solution and placed on a hot plate. The dye was allowed to steam for about 15 sec, the excess drained off, and the slide immersed in distilled water. After about a minute's washing, the slide was dried (on the hot plate) and the tissue covered with glycerol and a cover slip. In phase contrast, the cytoplasmic bodies were seen as discrete blue-green particles. Only nucleoli gave the same staining reaction. More general applicability of this technic was indicated.

Rat suprarenal glands fixed in Palade's 1% OsO4, buffered at pH 7.7 with veronal-acetate, to which 0.1% MgCl2 was added, were embedded in Vestopal-W and sectioned at 0.2-1 µ. The sections were attached to slides by floating on water, without adhesive, and drying at 60-80° C, placed in acetone for 1 min and then treated with the following staining procedure: Place the preparation in a filtered solution of oil red O, 1 gm; 70% alcohol, 50 ml; and acetone, C.P., 50 ml; for 0.5-1 hr. Rinse in absolute ethyl alcohol; drain; counterstain with 0.5% aqueous thionin for 5 min; rinse in distilled water; drain; stain in 0.2% azure B in phosphate buffer at pH 9, for 5 min. Dry and apply a drop of immersion oil directly on the section. The preparations are temporary. Ciaccio-positive lipids, rendered insoluble by OsO, fixation, stained red to ochre.

To a 1.0% filtered aqueous solution of toluidin blue add drop by drop 4–5 ml of either a saturated aqueous solution of HgCl2 or of KI. Collect the resulting dark precipitate on a filter paper and wash it with numerous small quantities of distilled water applied to both inside and outside of the filter paper. Wash until the drippings are distinctly blue (equivalent to about a 0.05% dye solution). Remove the paper and its contents from the funnel and dry either at room temperature or at 37°C. When dry, the treated dye can be brushed off the paper and stored. To prepare a staining solution add a weighed amount (0.12 gm if derived from the HgCl2 treatment, or 0.3 gm if from KI) to 100 ml of distilled water. This insures a saturated solution in either case and gives a satisfactory stain with most sections in 10-30 min. Thionin and other members of the thiazine dyes also showed improvement in staining qualities after this treatment.

For the demonstration of the sex chromatin body in human tissues, fixation in 95% alcohol or modified Davidson's solution (95% alcohol, 30; formalin, 20; glacial acetic acid, 10; distilled water, 30) was best. The staining procedure chosen for most materials is the following: Mounted preparations are coated with celloidin, hydrated, hydrolyzed 20 min in 52V HCl at 20-25°C, rinsed thoroughly in several changes of distilled water and transferred to a buffered thionin solution. This consists of 3 parts: (1) A saturated solution of thionin in 50% alcohol (filtered); (2) Michaelis buffer: sodium acetate (3 H2O), 9.714 gm; sodium barbiturate, 14.714 gm; CO2-free distilled water, 500 ml; and (3) 0.1N HCl. To make the staining solution, mix 28.0 ml of the buffer solution with 32.0 ml of 0.1N HCl and bring the total volume to 100.0 ml with the thionin solution. Its pH should be 5.7 × 0.2, and care should be exercised that no acid is carried over from the hydrolyzing solution, since this would progressively lower t...

Dyes used in the 3 methods recommended are: I, thionin and acridine orange (T-AO); II, Janus green and Darrow red (JG-DR); III, methyl green and methyl violet (MG-MV). The first 2 methods were two-solution stains, applied in sequence; the third, required only one solution since methyl violet is present in commercial methyl green. Staining solution and timing was as follows: Method I. 0.1% thionin in a 45% ethanolic solution of 0.01 N NaOH, 5 min at 70 C; rinsing in water and followed by 1 min in a 1% aqueous solution of acridine orange made up in 0.02 N NaOH, also at 70 C, then washed, and dried on slides. Method II. 0.5% Janus green in aqueous 0.05 N NaOH, 5 min at 70 C; rinsing in water then into 0.5% Darrow red in 0.05 N NaOH (aq.), 2 min at 70 C., washing, and drying on slides. Method III. 1% methyl green (commercial, unpurified) in 1% aqueous borax for 15-20 min at 20-25 C, washing and attaching to slides. All staining was performed by floating the sections on the staining solutions, all drying at 70...

Several samples of J.S.B. stain (Jaswant Singh and Bhattacharjee, 1944) solution 1 (polychrome methylene blue) were prepared with 3-8 hr for dichromate-acid oxidation and addition of varying quantities of Na2HPO4 buffer for pH adjustment. Storage under severe tropical conditions and periodical checks by staining Plasmodium cynomolgi smears revealed that staining solutions oxidized 6-7 hr with a final pH of 7.8 gave optimum results. Some precipitation of azures, due to heat after 5 mo, adversely affected the quality of staining solutions, while cooler storage conditions were most favorable. Spectrophotometric and chromatographic studies indicated that the J.S.B. solution 1 was composed of blue and purple components, corresponding to higher methylene azures with methylene blue and thionin with allied products respectively.

A new staining and dehydrating procedure for microorganisms is presented. It is based on the observation of Atwood and Orinstein (1949) that azure A or thionin, in the presence of SO2, stains chromosomes intensely and apparently selectively. The staining process is as follows: Cover-slip smears are hydrolyzed in 1 N HCl at 60°C. for the previously ascertained optimal hydrolysis time. They are then briefly rinsed in distilled water and transferred to either of the two following stains, (1) 0.25% thionin (10 ml.) to which thionyl chloride (1 drop), as a source of SO2, is added; (2) 0.25% azure A (10 ml.) to which thionyl chloride (2 drops), as a source of SO2, is added. Neither of these stains decolorizes, i.e., forms a leuco base, in the presence of SO2. Staining is allowed to proceed for a minimum of two hours.Following staining, the preparations are rinsed in distilled water, drained on filter paper, and immediately immersed in absolute alcohol which has been previously chilled to about -50°C. by packing...

Recently two articles on the use of thionin as a cell stain for neurological materials have appeared. One utilizes a solution buffered in the acid range3; the other uses a “steaming” staining solution4. For some time we have been using thionin as a routine stain after either formalin or alcohol fixation and our method is so simple and has given such satisfactory results with a variety of brands of thionin that it seemed to be worthy of more general use. Briefly the method consists of placing the celloidin sections in a 0.05% solution of Li2CO3 (the percentage of Li2CO3 is non-critical) for about 5 minutes and then grossly overstaining in a 0.25% solution of thionin in a 0.05% solution of Li2CO3 in distilled water. The overstaining is necessary if all the stain is to be removed from the background. The sections are then passed through distilled water, 70 or 80% alcohol, two changes of butyl alcohol, two changes of xylene and mounted with Clarite. For most material, split mica cover-slips are quite satisfac...

The efficient use of thionin as a counterstain for large sections stained by the Fink-Heimer procedure (1967) requires mounting on slides before applying the thionin. The following modifications of the standard methods are recommended.

Using a buffered acid thionin stain with carbolxylene as a clearing agent, a reliable stain for Nissl bodies may be performed on frozen sections of fresh or old formalin-fixed material in a relatively short period of time. The technic is simple: the buffering of thionin makes regressive differentiation unnecessary.