Search

Surface longwave radiation (SLR) plays a pivotal role in the Earth's energy balance, influencing a range of environmental processes and climate dynamics. As the demand for high spatial resolution remote sensing products grows, there is an increasing need for accurate SLR retrieval with enhanced spatial detail. This study focuses on the development and validation of models to estimate SLR using measurements from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor. Given the limitations posed by fewer spectral bands and data products in ASTER compared to moderate-resolution sensors, the proposed approach combines an atmospheric radiative transfer model MODerate resolution atmospheric TRANsmission (MODTRAN) with the Light Gradient Boosting Machine algorithm to estimate SLR. The MODTRAN simulations were performed to construct a representative training dataset based on comprehensive global atmospheric profiles and surface emissivity spectra data. Global sensitivity analyses reveal that key inputs influencing the accuracy of SLR retrievals should reflect surface thermal radiative signals and near-surface atmospheric conditions. Validated against ground-based measurements, surface upward longwave radiation (SULR) and surface downward longwave radiation (SDLR) using ASTER thermal infrared bands and surface elevation estimations resulted in root mean square errors of 17.76 W/m2 and 25.36 W/m2, with biases of 3.42 W/m2 and 3.92 W/m2, respectively. Retrievals show systematic biases related to extreme temperature and moisture conditions, e.g., causing overestimation of SULR in hot humid conditions and underestimation of SDLR in arid conditions. While challenges persist, particularly in addressing atmospheric variables and cloud masking, this work lays a foundation for accurate SLR retrieval from high spatial resolution sensors like ASTER. The potential applications extend to upcoming satellite missions, such as the Landsat Next, and contribute to advancing high-resolution remote sensing capabilities for an improved understanding of Earth's energy dynamics. [ABSTRACT FROM AUTHOR]

Surface soil moisture (SSM) plays an important role in agricultural and environmental systems. With the continuous improvement in the availability of remote sensing data, satellite technology has experienced widespread development in the monitoring of large-scale SSM. Synthetic Aperture Radar (SAR) and optical remote sensing data have been extensively utilized due to their complementary advantages in this field. However, the limited information from single-band SARs or single optical remote sensing data has restricted the accuracy of SSM retrieval, posing challenges for precise SSM monitoring. In contrast, multi-source and multi-band remote sensing data contain richer and more comprehensive surface information. Therefore, a method of combining multi-band SAR data and employing machine learning models for SSM inversion was proposed. C-band Sentinel-1 SAR data, X-band TerraSAR data, and Sentinel-2 optical data were used in this study. Six commonly used feature parameters were extracted from these data. Three machine learning methods suitable for small-sample training, including Genetic Algorithms Back Propagation (GA-BP), support vector regression (SVR), and Random Forest (RF), were employed to construct the SSM inversion models. The differences in SSM retrieval accuracy were compared when two different bands of SAR data were combined with optical data separately and when three types of data were used together. The results show that the best inversion performance was achieved when all three types of remote sensing data were used simultaneously. Additionally, compared to the C-band SAR data, the X-band SAR data exhibited superior performance. Ultimately, the RF model achieved the best accuracy, with a determinable coefficient of 0.9186, a root mean square error of 0.0153 cm3/cm3, and a mean absolute error of 0.0122 cm3/cm3. The results indicate that utilizing multi-band remote sensing data for SSM inversion offers significant advantages, providing a new perspective for the precise monitoring of SSM. [ABSTRACT FROM AUTHOR]

To address the issue of estimating soil moisture at a hyper-resolution scale, a methodology referred to as Precision Irrigation Soil Moisture Mapper (PrISMM), that includes three key components, is developed: high-resolution remotely sensed optical and thermal data, surface energy balance modeling, and site-specific soil analysis. An Unmanned Aerial Vehicle/System (UAV or UAS) collects high-resolution multispectral imagery in the Dallas–Fort Worth metropolitan study area. Orthomosaics are converted to thermal inertia estimates in a spatially distributed format using the remotely sensed data combined with a set of surface energy balance modeling equations. Using thermal and physical properties of soil gained from site-specific soil analysis, thermal inertia estimates were further converted from thermal inertia to daily volumetric soil water content (VSWC) with a horizonal resolution of 8.6 cm. A ground truthing dataset of measured VSWC values taken from a Time Domain Reflectometer was compared with model results, producing a reasonable correlation with an average coefficient of determination of (R2) = 0.79, an average root mean square error (RMSE) = 0.0408, and mean absolute error (MAE) = 0.0308. This study highlights a practical approach of estimating VSWC for irrigation purposes while providing superior spatio-temporal coverage over in situ methods. The authors envision that PrISMM can be implemented in water usage management by relating VSWC with weather forecasts and evapotranspiration rates to develop time-based spatially distributed irrigation management plans. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) is a critical variable affecting ecosystem carbon and water cycles and their feedback to climate change. In this study, we proposed a convolutional neural network (CNN) model embedded with a residual block and attention module, named SMNet, to spatially downscale the European Space Agency (ESA) Climate Change Initiative (CCI) SM product. In the SMNet model, a lightweight Convolutional Block Attention Module (CBAM) dual-attention mechanism was integrated to comprehensively extract the spatial and channel information from the high-resolution input remote sensing products, the reanalysis meteorological dataset, and the topographic data. The model was employed to downscale the ESA CCI SM from its original spatial resolution of 25 km to 1 km in California, USA, in the annual growing season (1 May to 30 September) from 2003 to 2021. The original ESA CCI SM data and in situ SM measurements (0–5 cm depth) from the International Soil Moisture Network were used to validate the model's performance. The results show that compared with the original ESA CCI SM data, the downscaled SM data have comparable accuracy with a mean correlation (R) and root mean square error (RMSE) of 0.82 and 0.052 m3/m3, respectively. Moreover, the model generates reasonable spatiotemporal SM patterns with higher accuracy in the western region and relatively lower accuracy in the eastern Nevada mountainous area. In situ site validation results in the SCAN, the SNOTEL network, and the USCRN reveal that the R and RMSE are 0.62, 0.63, and 0.77, and 0.077 m3/m3, 0.093 m3/m3, and 0.078 m3/m3, respectively. The results are slightly lower than the validation results from the original ESA CCI SM data. Overall, the validation results suggest that the SMNet downscaling model proposed in this study has satisfactory performance in handling the task of soil moisture downscaling. The downscaled SM model not only preserves a high level of spatial consistency with the original ESA CCI SM model but also offers more intricate spatial variations in SM depending on the spatial resolution of model input data. [ABSTRACT FROM AUTHOR]

The Soil Moisture Active–Passive (SMAP) mission has greatly contributed to the use of remote sensing technologies for monitoring the Earth's land surface and estimating geophysical parameters that influence the climate system. Since the SMAP mission switched its radar receiver to allow the reception of Global Positioning System (GPS) signals, Global Navigation Satellite System Reflectometry (GNSS-R) configuration has been enabled, providing full polarimetric forward scattering measurements of the Earth's surface, also known as SMAP Reflectometry or SMAP-R. Polarimetric GNSS-R is beneficial for sensing land surface properties, especially for more accurate estimations of soil moisture (SM) in densely vegetated areas. In this study, we explore the opportunity to enhance SMAP mission soil moisture estimates using reflected GNSS signals. We achieve this by interpolating the sparse reflectivity data with terrain information to disaggregate radiometer brightness temperatures. Our main objective is to present a novel algorithm based on Graph Signal Processing (GSP) that uses reflectometry data to enhance SMAP radiometer observations and ultimately improve SM retrievals. By implementing methods from the GSP field, we formulate the reflectivity interpolation problem as a signal reconstruction on a graph, where the weights of the edges between the nodes are chosen as a function of geophysical information. Subsequently, using the retrieved reflectivity maps, we increase the resolution of the brightness temperature data, leading to an improvement in the SM estimates. Initial findings indicate that our GSP method presents a promising alternative for analyzing sparse remote sensing observations, leveraging Earth's surface geophysical information. This approach results in a notable improvement, with a reduced Root Mean Square Error (RMSE) of 11.8% compared to SMAP data and a reduction in unbiased RMSE (uRMSE) by 14.7% over vegetated areas. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) is a crucial environmental variable, and it plays an important role in energy and water cycles. SM data retrieval based on microwave satellite remote sensing has garnered significant attention due to its spatial continuity, wide observational coverage, and relatively low cost. Validating the accuracy of satellite remote sensing SM products is a critical step in enhancing data credibility, which plays a vital role in ensuring the effective application of satellite remote sensing data across various fields. Firstly, this study focused on Henan Province and evaluated the accuracy of the SMAP Enhanced L3 Radiometer Global and Polar Grid Daily 9 km EASE-Grid Soil Moisture (SPL3SMP_E) product along with its application in agriculture. The evaluation was based on in situ SM data from 55 stations in Henan Province. The assessment metrics used in this study include mean difference (MD), root mean square error (RMSE), unbiased root mean square error (ubRMSE), and the Pearson correlation coefficient (R). The time span of this study is from 2017 to 2020. The evaluation results indicated that the SPL3SMP_E soil moisture product performs well, as reflected by an ubRMSE value of 0.045 (m3/m3), which was relatively close to the product's design accuracy of 0.04 (m3/m3). Moreover, the accuracy of the product was unaffected by temporal factors, but the product exhibited strong spatial aggregation, which was closely related to land use types. Then, this study explored the response of the SPL3SMP_E product to irrigation signals. The precipitation and irrigation data from Henan Province were employed to investigate the response of the SPL3SMP_E soil moisture product to irrigation. Our findings revealed that the SPL3SMP_E soil moisture product was capable of capturing over 70% of irrigation events in the study area, indicating its high sensitivity to irrigation signals in this region. In this study, the SPL3SMP_E product was also employed for monitoring agricultural drought in Henan Province. The findings revealed that the collaborative use of the SPL3SMP_E soil moisture product and machine learning algorithms proves highly effective in monitoring significant drought events. Furthermore, the integration of multiple indices demonstrated a notable enhancement in the accuracy of drought monitoring. Such an evaluation holds significant implications for the effective application of satellite remote sensing SM data in agriculture and other domains. [ABSTRACT FROM AUTHOR]

Efficient water management strategies are of utmost importance in drought-prone regions, given the fundamental role irrigation plays in avoiding yield losses and food shortages. Traditional methodologies for estimating irrigation amounts face limitations in terms of overall precision and operational scalability. This study proposes to estimate irrigation amounts from soil moisture (SM) data by adapting the PrISM (Precipitation Inferred from Soil Moisture) methodology. The PrISM assimilates SM into a simple Antecedent Precipitation Index (API) model using a particle filter approach, which allows the creation and estimation of irrigation events. The methodology is applied in a semi-arid region in the Ebro basin, located in the north-east of Spain (Catalonia), from 2016 to 2023. Multi-year drought, which started in 2020, particularly affected the region starting from the spring of 2023, which led to significant reductions in irrigation district water allocations in some of the areas of the region. This study demonstrates that the PrISM approach can correctly identify areas where water restrictions were adopted in 2023, and monitor the water usage with good performances and reliable results. When compared with in situ data for 8 consecutive years, PrISM showed a significant person's correlation between 0.58 and 0.76 and a cumulative weekly root mean squared error (rmse) between 7 and 11 mm. Additionally, PrISM was applied to three irrigation districts with different levels of modernization, due to the different predominant irrigation systems: flood, sprinkler, and drip. This analysis underlined the strengths and limitations of PrISM depending on the irrigation techniques monitored. PrISM has good performances in areas irrigated by sprinkler and flood systems, while difficulties are present over drip irrigated areas, where the very localized and limited irrigation amounts could not be detected from S M observations. [ABSTRACT FROM AUTHOR]

The passive microwave land surface emissivity (MLSE) plays a crucial role in retrieving various land surface and atmospheric parameters and in Numerical Weather Prediction models. The retrieval accuracy of MLSE depends on many factors, including the consistency of the input data acquisition time. The FengYun-3D (FY-3D) polar-orbiting meteorological satellite, equipped with passive microwave and infrared bands, offers time-consistent data crucial for MLSE retrieval. This study proposes a physics-based MLSE retrieval algorithm using all the input data from the FY-3D satellite. Based on the retrieved MLSE, the spatial distribution of the MLSE is closely correlated with the land cover types and topography. Lower emissivities prevailed over barren or sparsely vegetated regions, river basins, and coastal areas. Higher emissivities dominated densely vegetated regions and mountainous areas. Moderate emissivities dominated grasslands and croplands. Lower-frequency channels showed larger emissivity differences with different polarizations than those of higher-frequency channels in barren or sparsely vegetated regions. The MLSE across densely vegetated land areas, mountainous areas, and deserts showed small seasonal variations. However, woody savannas, grasslands, croplands, and seasonal snow-covered areas showed noticeable seasonal variations. For most land cover types, the differences between vertically and horizontally polarized emissivities remained relatively constant across seasons. However, certain grasslands in eastern Inner Mongolia and southern Mongolia showed clear seasonal variations. It is very difficult to verify the MLSE on a large scale. Consequently, the possible error sources in the retrieved MLSE were analyzed, including the brightness temperature errors (correlation coefficient ranging from 0.92 to 0.99) and the retrieved land surface temperature errors (Root Mean Square Error was 3.34 K and relation coefficient was 0.958). [ABSTRACT FROM AUTHOR]

Satellite observations have provided global and regional soil-moisture estimates in the last four decades. However, the accuracy of these observations largely depends on reducing uncertainties in the retrieval algorithms. In this study, we address two challenges affecting the quality of soil-moisture estimates from a widely used soil-moisture-retrieval model, the land parameter retrieval model (LPRM). We studied two improvement schemes that were aimed at reducing uncertainties in open water signals (the LPRMv6_OWF) and vegetation signals (the LPRMv6_Veg), as well as a scheme to reduce their combined impacts (the LPRMv6_OWFVeg) on LPRM-retrieved soil moisture using the FengYun-3B (FY-3B) satellite observations. To assess the impacts of the improvement schemes, we utilized in situ soil moisture from the Jiangsu and Jiangxi provinces in China. We found that the retrievals (Rs) of the LPRMv6_Veg and the LPRMv6_OWFVeg were mainly in the range of 0.2 to 0.5 in Jiangsu and Jiangxi, with increases of 0.1 compared to those of the LPRMv6. The standard deviation (SD) of the LPRMv6_OWFVeg increased in Jiangsu, while the R of the LPRMv6_OWF increased in Jiangsu by 0.05–0.1 compared to that of the LPRMv6, but the SD tended to become worse. In Jiangxi, there was an increase of 0.1 in R. The results show that each of these algorithms improved the accuracy of soil-moisture inversion to some extent, compared to the original algorithm, with the LPRMv6_OWFVeg showing the greatest improvement, followed by the LPRMv6_Veg. The accuracy of both the LPRMv6_OWF and the LPRMv6_OWFVeg decreased to some extent when the open-water fraction (OWF) was greater than 0.2. Full areal extent analyses based on triple collocation showed significant improvements in correlations and minimized errors across different vegetation scenarios over the entire region of China in both the LPRMv6_OWF and the LPRMv6_Veg. However, reduced qualities were found in arid regions in northern China because of the nonlinear relationships between land-surface temperature, vegetation, and soil moisture in the LPRM. These results highlight important lessons for developing comprehensive improvement schemes for soil-moisture retrievals from passive microwave satellite observations. [ABSTRACT FROM AUTHOR]

The soil moisture from the South-to-North Water Diversion Middle Route Project is assessed in this study. Complex and variable geological conditions complicate the prediction of soil moisture in the study area. To achieve this aim, we carried out research on soil moisture inversion methods for channel slopes in the study area using massive monitoring data from multiple GNSS observatories on channel slopes, incorporating GNSS-R techniques and deep learning algorithms. To address the issue of low accuracy in linear inversion when using a single satellite, this study proposes a multi-satellite and multi-frequency data fusion technique. Furthermore, three soil moisture inversion models, namely, the linear model, BP neural network model, and GA-BP neural network model, are established by incorporating deep learning techniques. In comparison with single-satellite data inversion, with the data fusion technique proposed in this study, the correlation is improved by 12.7%, the root mean square error is reduced by 0.217, the mean square error is decreased by 0.884, and the mean absolute error is decreased by 0.243 with the linear model. With the BP neural network model, the correlation is increased by 15.4%, the root mean square error is decreased by 0.395, the mean square error is decreased by 0.465, and the mean absolute error is reduced by 0.353. Moreover, with the GA-BP neural network model, the correlation is improved by 6.3%, the root mean square error is decreased by 1.207, the mean square error is decreased by 0.196, and the mean absolute error is reduced by 0.155. The results indicate that performing data fusion by using multiple satellites and multi-frequency bands is a feasible approach for improving the accuracy of soil moisture inversion. These research findings provide new technical means for the risk analysis of deformation disasters in the expansive soil channel slopes of the South-to-North Water Diversion Middle Route Project. [ABSTRACT FROM AUTHOR]

This study aims to analyze the potential of different drought indices for identifying drought periods and predicting cereal yield in two semi-arid regions, Lleida in Catalonia and Kairouan in Tunisia, which have similar Mediterranean climates but different agricultural practices. Four drought indices, namely the Soil Moisture Anomaly Index (SMAI), the Vegetation Anomaly Index (VAI), the Evapotranspiration Anomaly Index (EAI), and the Inverse Temperature Anomaly Index (ITAI), were calculated from remote sensing data. Drought periods were identified from 2010/2011 to 2021/2022 based on the aforementioned indices. A correlation study between drought indices and wheat and barley yields was performed in order to select the most informative index and month for yield prediction. In the rainfed cereal area of Lleida, the strongest correlation was found between the EAI and VAI with barley yield (0.91 and 0.83, respectively) at the time of cereal maturity in June. For wheat, the strongest correlation was found between the EAI and VAI (0.75 and 0.72, respectively) at the time of cereal maturity in July. However, the VAI, EAI, and SMAI showed the best performance as an earlier indicator in March with a correlation with barley yield of 0.72, 0.67, and 0.64, respectively; the lowest standard deviation was for the SMAI. For wheat yield, the best earlier indicator was the SMAI in March, showing the highest correlation (0.6) and the lowest standard deviation. For the irrigated cereal zone of Kairouan, the strongest correlation (0.9) and the lowest standard deviation are found between the EAI and cereal yield in April. In terms of advanced prediction, the VAI shows a high correlation in March (0.79) while the SMAI shows a slightly lower correlation in February (0.67) and a lower standard deviation. The results highlight the importance of the EAI and SMAI as key indicators for the estimation and early estimation (respectively) of cereal yield. [ABSTRACT FROM AUTHOR]

Spatial interpolation techniques play an important role in hydrology, as many point observations need to be interpolated to create continuous surfaces. Despite the availability of several tools and methods for interpolating data, not all of them work consistently for hydrologic applications. One of the techniques, the Laplace Equation, which is used in hydrology for creating flownets, has rarely been used for data interpolation. The objective of this study is to examine the efficiency of Laplace formulation (LF) in interpolating data used in hydrologic applications (hydrologic data) and compare it with other widely used methods such as inverse distance weighting (IDW), natural neighbor, and ordinary kriging. The performance of LF interpolation with other methods is evaluated using quantitative measures, including root mean squared error (RMSE) and coefficient of determination (R2) for accuracy, visual assessment for surface quality, and computational cost for operational efficiency and speed. Data related to surface elevation, river bathymetry, precipitation, temperature, and soil moisture are used for different areas in the United States. RMSE and R2 results show that LF is comparable to other methods for accuracy. LF is easy to use as it requires fewer input parameters compared to inverse distance weighting (IDW) and Kriging. Computationally, LF is faster than other methods in terms of speed when the datasets are not large. Overall, LF offers a robust alternative to existing methods for interpolating various hydrologic data. Further work is required to improve its computational efficiency. [ABSTRACT FROM AUTHOR]

Accurate global soil moisture (SM) data are crucial for modeling land surface hydrological cycles and monitoring climate change. Spaceborne global navigation satellite system reflectometry (GNSS-R) has attracted extensive attention due to its unique advantages, such as faster revisit time, lower payload costs, and all-weather operation. GNSS signal reflected at L-band also has significant advantages for SM estimation. Usually, SM is estimated based on the sensitivity of GNSS-R reflectivity to SM, but the noise in observations can significantly impact SM estimation results. A new SM retrieval method based on robust regression is proposed to address this issue in this work, and the effects of roughness and vegetation on the effective reflectivity of the Cyclone Global Navigation Satellite System (CyGNSS) are reconsidered. Ancillary data are provided by the SM Active Passive (SMAP) mission. The retrieved results from the training sets and test sets agree well with the referenced SMAP SM data. The correlation coefficient R is 0.93, the root mean square error (RMSE) is 0.058 cm3cm−3, the unbiased RMSE (ubRMSE) is 0.042 cm3cm−3, and the mean absolute error (MAE) is 0.040 cm3cm−3 in the training sets. For the test, the correlation coefficient is 0.91, the RMSE is 0.067 cm3cm−3, the ubRMSE is 0.051 cm3cm−3, and the MAE is 0.044 cm3cm−3. The proposed method has been evaluated using in situ measurements from the SMAP/in situ core validation site; in situ measurements and retrieval results exhibit good consistency with the ubRMSE value below 0.35 cm3cm−3. Moreover, the SM retrieval results using robust regression methods show better performance than CyGNSS official SM products that use linear regression. In addition, the land cover types significantly affect the accuracy of SM retrieval, and the incoherent scattering in densely vegetated areas (tropical forests) usually leads to more errors. [ABSTRACT FROM AUTHOR]

This study develops a triple-collocation (TC) based, multi-source shallow-soil moisture product for Oklahoma. The method uses a least squared weights (LSW) optimization to find the set of parameters that result in the lowest root mean squared error (RMSE) with respect to the "unknown truth". Soil moisture information from multiple sources and resolutions, including the Soil Moisture Active Passive SMAP L3_SM_P_E (9 km, daily), the physically-based, land surface model (LSM) estimates from NLDAS_NOAH0125_H (1/8°, hourly), and the Oklahoma Mesonet ground sensor network (9 km interpolated from point, 30 min) is merged into a 9 km spatial and daily temporal resolution product across the state of Oklahoma from April 2015 to July 2019. This multi-sensor surface soil moisture (MSSM) product is assessed in terms of a state-wide benchmark and previously tested, in situ-based soil moisture product and SMAP L4. Results show that: (1) independent source products have differential values according to the regional conditions they represent, including land cover type, soils, irrigation, or climate regime; (2) beyond serving as validation sets, in situ measurements are of significant value for improving the accuracy of multi-sensor soil moisture datasets through TC; and (3) state-wide RMSE values obtained with MSSM are similar to the typical measurement error found on in situ ground measurements which provides some degree of confidence on the new product. MSSM is an improvement over currently available products in Oklahoma due to its minimized uncertainty, easiness of production, and continuous temporal and geographic coverage. Nevertheless, to exploit its utility, further tests of this methodology are needed in different climates, land cover types, geographic regions, and for other independent products and spatiotemporal resolutions. [ABSTRACT FROM AUTHOR]

Surface soil moisture (SSM) and root-zone soil moisture (RZSM) are key hydrological variables for the agricultural water cycle and vegetation growth. Accurate SSM and RZSM forecasting at sub-seasonal scales would be valuable for agricultural water management and preparations. Currently, weather model-based soil moisture predictions are subject to large uncertainties due to inaccurate initial conditions and empirical parameterization schemes, while the data-driven machine learning methods have limitations in modeling long-term temporal dependences of SSM and RZSM because of the lack of considerations in the soil water process. Thus, here, we innovatively integrate the model-based soil moisture predictions from a sub-seasonal-to-seasonal (S2S) model into a data-driven stacked deep learning model to construct a hybrid SSM and RZSM forecasting framework. The hybrid forecasting model is evaluated over the Yangtze River Basin and parts of Europe from 1- to 46-day lead times and is compared with four baseline methods, including the support vector regression (SVR), random forest (RF), convolutional long short-term memory (ConvLSTM) and the S2S model. The results indicate substantial skill improvements in the hybrid model relative to baseline models over the two study areas spatiotemporally, in terms of the correlation coefficient, unbiased root mean square error (ubRMSE) and RMSE. The hybrid forecasting model benefits from the long-lead predictive skill from S2S and retains the advantages of data-driven soil moisture memory modeling at short-lead scales, which account for the superiority of hybrid forecasting. Overall, the developed hybrid model is promising for improved sub-seasonal SSM and RZSM forecasting over global and local areas. [ABSTRACT FROM AUTHOR]

Large-scale surface soil moisture (SSM) distribution is very necessary for agricultural drought monitoring, water resource management, and climate change research. However, the current large-scale SSM products have relatively coarse spatial resolution, which limits their application. In this study, we estimate the 1 km daily SSM in China based on ensemble learning using a multi-source data set including in situ soil moisture measurements from 2980 meteorological stations, MODIS Surface Reflectance products, SMAP (Soil Moisture Active Passive) soil moisture products, ERA5-Land dataset, SRTM DEM and soil texture. Among them, in situ measurements are used as independent variables, and other data are used as dependent variables. In order to improve the spatio-temporal completeness of SSM, the missing value in SMAP soil moisture products were reconstructed using the Discrete Cosine Transformation-penalized Partial Least Square (DCT-PLS) method to provide spatially complete background field information for soil moisture retrieval. The results show that the reconstructed soil moisture value has high quality, and the DCT-PLS method can fully utilize the three-dimensional spatiotemporal information to fill the data gaps. Subsequently, the performance of four ensemble learning models of random forest (RF), extremely randomized trees (ERT), extreme gradient boosting (XGBoost), and light gradient boosting machine (LightGBM) for soil moisture retrieval was evaluated. The LightGBM outperformed the other three machine learning models, with a correlation coefficient (R2) of 0.88, a bias of 0.0004 m³/m³, and an unbiased root mean square error (ubRMSE) of 0.0366 m³/m³. The high correlation between the in situ soil moisture and the predicted values at each meteorological station further indicate that LightGBM can well capture the temporal variation of soil moisture. Finally, the model was used to map the 1 km daily SSM in China on the first day of each month from May to October 2018. This study can provide some reference and help for future long-term daily 1 km surface soil moisture mapping in China. [ABSTRACT FROM AUTHOR]

Satellites are designed to monitor geospatial data over large areas at a catchment scale. However, most of satellite validation works are conducted at local point scales with a lack of spatial representativeness. Although upscaling them with a spatial average of several point data collected in the field, it is almost impossible to reorganize backscattering responses at pixel scales. Considering the influence of soil storage on watershed streamflow, we thus suggested watershed-scale hydrological validation. In addition, to overcome the limitations of backscattering models that are widely used for C-band Synthetic Aperture Radar (SAR) soil moisture but applied to bare soils only, in this study, RADARSAT-2 soil moisture was stochastically retrieved to correct vegetation effects arising from agricultural lands. Roughness-corrected soil moisture retrievals were assessed at various spatial scales over the Brightwater Creek basin (land cover: crop lands, gross drainage area: 1540 km2) in Saskatchewan, Canada. At the point scale, local station data showed that the Root Mean Square Errors (RMSEs), Unbiased RMSEs (ubRMSEs) and biases of Radarsat-2 were 0.06~0.09 m3/m3, 0.04~0.08 m3/m3 and 0.01~0.05 m3/m3, respectively, while 1 km Soil Moisture Active Passive (SMAP) showed underestimation at RMSEs of 0.1~0.22 m3/m3 and biases of −0.036~−0.2080 m3/m3. Although SMAP soil moisture better distinguished the contributing area at the catchment scale, Radarsat-2 soil moisture showed a better discharge hysteresis. A reliable estimation of the soil storage dynamics is more important for discharge forecasting than a static classification of contributing and noncontributing areas. [ABSTRACT FROM AUTHOR]

SM2RAIN is a well-established methodology for estimating precipitation from satellite or observed soil moisture and it has been applied as a complementary approach to conventional precipitation monitoring methods. However, satellite soil moisture retrievals are usually subject to various biases and limited number of retrievals (and therefore large intervals) in remote areas, such as the Tibetan Plateau (TP), and little is known about their potential impacts on precipitation estimation. This study seeks to quantify the uncertainties in Soil Moisture Active and Passive (SMAP) soil moisture estimated precipitation through the commonly used SM2RAIN by referring to in situ soil moisture observations from the central Tibetan Plateau soil moisture network. The estimated precipitation is evaluated against rain gauge observations. Additional attention is paid to different orbits of the SMAP retrievals. Results show that the original SM2RAIN algorithm tends to underestimate the precipitation amount in the central TP when using SMAP soil moisture retrievals as input. The retrieval accuracy and sampling interval of SMAP soil moisture from ascending (descending) orbits each count for 1.04 mm/5 d (−0.18 mm/5 d) and 1.67 mm/5 d (0.72 mm/5 d) of estimated precipitation uncertainties as represented by root mean square error. Besides, the descending product of SMAP with a relatively less sampling interval and higher retrieval accuracy outperforms the ascending one in estimating precipitation, and the combination of both two orbits does add value to the overall SM2RAIN estimation. This study is expected to provide guidance for future applications of SM2RAIN-derived precipitation. Meanwhile, more reliable SM2RAIN precipitation estimations are desired when using higher quality satellite soil moisture products with better retrieval accuracy and smaller intervals. [ABSTRACT FROM AUTHOR]

The retrieval of soil moisture information with spatially and temporally high resolution from Synthetic Aperture Radar (SAR) observations is still a challenge. By using multi-orbit Sentinel-1 C-band time series, we present a novel approach for estimating volumetric soil moisture content for agricultural areas with a temporal resolution of one to two days, based on a short-term change detection method. By applying an incidence angle normalization and a Fourier Series transformation, the effect of varying incidence angles on the backscattering signal could be reduced. As the C-band co-polarized backscattering signal is prone to vegetational changes, it is used in this study for the vegetational correction of its related backscatter ratios. The retrieving algorithm was implemented in a cloud-processing environment, enabling a potential global and scalable application. Validated against eight in-situ cosmic ray neutron probe stations across the Rur catchment (Germany) as well as six capacitance stations at the Apulian Tavoliere (Italy) site for the years 2018 to 2020, the method achieves a correlation coefficient of R of 0.63 with an unbiased Root Mean Square Error of 0.063 m3/m3. [ABSTRACT FROM AUTHOR]

Global, long-term, gap-free, high quality soil moisture products are extremely important for hydrological monitoring and climate change research. However, soil moisture products produced from satellite observations have data gaps due to the limited capabilities of satellite orbit/swath and retrieval algorithms, which limit the regional and global applications of soil moisture data in hydrology and agriculture studies. To solve this problem, we proposed a gap-filling method to reconstruct a global gap-free surface soil moisture product by applying the machine learning (Random Forest) algorithm on a pixel-by-pixel basis, taking into account the nonlinear relationship between surface soil moisture and the related surface environmental variables. The gap-filling method was applied to the NN-SM surface soil moisture product, which has a fraction of data gaps of around 50% globally on a multi-year average. A global daily gap-free surface soil moisture dataset from 2002 to 2020 was then generated. The reconstructed values of several sub-regions after manually eliminating the original values were cross-verified with the original data, and this clearly demonstrated the reliability of the reconstruction method with the correlation coefficient (R) ranging between 0.770 and 0.918, the Root Mean Square Error (RMSE) between 0.057 and 0.082 m3/m3, the unbiased Root Mean Square Error (ubRMSE) between 0.053 and 0.081 m3/m3, and Bias between −0.012 and 0.008 m3/m3. The accuracy of the reconstructed surface soil moisture dataset was evaluated using in situ observations of surface soil moisture at 12 sites from the International Soil Moisture Network (ISMN) and the Long-Term Agroecosystem Research (LTAR) network, and the results showed good accuracy in terms of R (0.610), RMSE (0.067 m3/m3), ubRMSE (0.045 m3/m3) and Bias (0.031 m3/m3). Overall, the reconstructed surface soil moisture dataset retained the characteristics of the NN-SM product, such as high accuracy and good spatiotemporal pattern. However, with the advantage of continuous spatiotemporal coverage, it is more suitable for further applications in the analysis of global surface soil moisture trends, land surface hydrological processes, and land-atmosphere energy and water exchanges, etc. [ABSTRACT FROM AUTHOR]

Soil moisture is an important land environment characteristic that connects agriculture, ecology, and hydrology. Surface soil moisture (SSM) prediction can be used to plan irrigation, monitor water quality, manage water resources, and estimate agricultural production. Multi-source remote sensing is a crucial tool for assessing SSM in agricultural areas. The field-measured SSM sample data are required in model building and accuracy assessment of SSM inversion using remote sensing data. When the SSM samples are insufficient, the SSM inversion accuracy is severely affected. An SSM inversion method suitable for a small sample size was proposed. The alpha approximation method was employed to expand the measured SSM samples to offer more training data for SSM inversion models. Then, feature parameters were extracted from Sentinel-1 microwave and Sentinel-2 optical remote sensing data, and optimized using three methods, which were Pearson correlation analysis, random forest (RF), and principal component analysis. Then, three common machine learning models suitable for small sample training, which were RF, support vector regression, and genetic algorithm-back propagation neural network, were built to retrieve SSM. Comparison experiments were carried out between various feature optimization methods and machine learning models. The experimental results showed that after sample augmentation, SSM inversion accuracy was enhanced, and the combination of utilizing RF for feature screening and RF for SSM inversion had a higher accuracy, with a coefficient of determination of 0.7256, a root mean square error of 0.0539 cm3/cm3, and a mean absolute error of 0.0422 cm3/cm3, respectively. The proposed method was finally used to invert the regional SSM of the study area. The inversion results indicated that the proposed method had good performance in regional applications with a small sample size. [ABSTRACT FROM AUTHOR]

Near-surface soil moisture content variation is a major factor in the frequent shallow slope failures observed on Mississippi's highway slopes built on expansive clay. Soil moisture content variation is monitored generally through borehole sensors in highway embankments and slopes. This point monitoring method lacks spatial resolution, and the sensors are susceptible to premature failure due to wear and tear. In contrast, Unmanned/Uncrewed Aerial Vehicles (UAVs) have higher spatial and temporal resolutions that enable more efficient monitoring of site conditions, including soil moisture variation. The current study focused on developing two methods to predict soil moisture content (θ) using UAV-captured optical and thermal combined with machine learning and statistical modeling. The first method used Red, Green, and Blue (RGB) color values from UAV-captured optical images to predict θ. Support Vector Machine for Regression (SVR), Extreme Gradient Boosting (XGB), and Multiple Linear Regression (MLR) models were trained and evaluated for predicting θ from RGB values. The XGB model and MLR model outperformed the SVR model in predicting soil moisture content from RGB values. The R2 values for the XGB and MLR models were >0.9 for predicting soil moisture when compared to SVR (R2 = 0.25). The Root Mean Square Error (RMSE) for XGB, SVR, and MLR were 0.009, 0.025, and 0.01, respectively, for the test dataset, affirming that XGB was the best-performing model among the three models evaluated, followed by MLR and SVR. The better-performing XGB and MLR models were further validated by predicting soil moisture using unseen input data, and they provided good prediction results. The second method used Diurnal Land Surface Temperature variation (ΔLST) from UAV-captured Thermal Infrared (TIR) images to predict θ. TIR images of vegetation-covered areas and bare ground areas of the highway embankment side slopes were processed to extract ΔLST amplitudes. The underlying relationship between soil surface thermal inertia and moisture content variation was utilized to develop a predictive model. The resulting single-parameter power curve fit model accurately predicted soil moisture from ΔLST, especially in vegetation-covered areas. The power curve fit model was further validated on previously unseen TIR, and it predicted θ with an accuracy of RMSE = 0.0273, indicating good prediction performance. The study was conducted on a field scale and not in a controlled environment, which aids in the generalizability of the developed predictive models. [ABSTRACT FROM AUTHOR]

Accurate high-resolution soil moisture mapping is critical for surface studies as well as climate change research. Currently, regional soil moisture retrieval primarily focuses on a spatial resolution of 1 km, which is not able to provide effective information for environmental science research and agricultural water resource management. In this study, we developed a quantitative retrieval framework for high-resolution (250 m) regional soil moisture inversion based on machine learning, multisource data fusion, and in situ measurement data. Specifically, we used various data sources, including the normalized vegetation index, surface temperature, surface albedo, soil properties data, precipitation data, topographic data, and soil moisture products from passive microwave data assimilation as input parameters. The soil moisture products simulated based on ground model simulation were used as supplementary data of the in situ measurements, together with the measured data from the Maqu Observation Network as the training target value. The study was conducted in the Zoige region of the Tibetan Plateau during the nonfreezing period (May–October) from 2009 to 2018, using random forests for training. The random forest model had good accuracy, with a correlation coefficient of 0.885, a root mean square error of 0.024 m³/m³, and a bias of −0.004. The ground-measured soil moisture exhibited significant fluctuations, while the random forest prediction was more accurate and closely aligned with the field soil moisture compared to the soil moisture products based on ground model simulation. Our method generated results that were smoother, more stable, and with less noise, providing a more detailed spatial pattern of soil moisture. Based on the permutation importance method, we found that topographic factors such as slope and aspect, and soil properties such as silt and sand have significant impacts on soil moisture in the southeastern Tibetan Plateau. This highlights the importance of fine-scale topographic and soil property information for generating high-precision soil moisture data. From the perspective of inter-annual variation, the soil moisture in this area is generally high, showing a slow upward trend, with small spatial differences, and the annual average value fluctuates between 0.3741 m3/m3 and 0.3943 m3/m3. The intra-annual evolution indicates that the monthly mean average soil moisture has a large geographical variation and a small multi-year linear change rate. These findings can provide valuable insights and references for regional soil moisture research. [ABSTRACT FROM AUTHOR]

Karstic terrains are usually dominated by aquifer systems and/or underground cavities. Overexploitation of groundwater in such areas often induces land subsidence and sometimes causes sinkholes. The Cheria basin in Algeria suffers from severe land subsidence issues, and this phenomenon has been increasing in recent years due to population expansion and uncontrolled groundwater exploitation. This work uses GPS data and persistent scatterer interferometry synthetic aperture radar (PS-InSAR) techniques to monitor the land subsidence rate by employing Sentinel-1 satellite data for the period from 2016 to 2022. Our results demonstrate that the Cheria basin experiences both uplift and subsidence in places, with an overall substantial change in the land surface. The total cumulative subsidence over 6 years reached a maximum of 500 mm. Comparison of land deformation between PSI and GPS showed root mean square error (RMSE) values of about 2.83 mm/year, indicating that our analyzed results are satisfactorily reproducing the actual changes. Nonetheless, these results can be used to extract the susceptible zones for vertical ground displacement and evaluate the surface deformation inventory map of the region for reducing damages (e.g., human losses, economic impact, and environmental degradation) that may occur in the future (e.g., sinkholes) and can be further utilized in perspective for a sinkhole early warning system. [ABSTRACT FROM AUTHOR]

Regional quantification of energy and water balance fluxes depends inevitably on the estimation of surface and rootzone soil moisture. The simulation of soil moisture depends on the soil retention characteristics, which are difficult to estimate at a regional scale. Thus, the present study proposes a new method to estimate high-resolution Soil Hydraulic Parameters (SHPs) which in turn help to provide high-resolution (spatial and temporal) rootzone soil moisture (RZSM) products. The study is divided into three phases—(I) involves the estimation of finer surface soil moisture (1 km) from the coarse resolution satellite soil moisture. The algorithm utilizes MODIS 1 km Land Surface Temperature (LST) and 1 km Normalized difference vegetation Index (NDVI) for downscaling 25 km C-band derived soil moisture from AMSR-2 to 1 km surface soil moisture product. At one of the test sites, soil moisture is continuously monitored at 5, 20, and 50 cm depth, while at 44 test sites data were collected randomly for validation. The temporal and spatial correlation for the downscaled product was 70% and 83%, respectively. (II) In the second phase, downscaled soil moisture product is utilized to inversely estimate the SHPs for the van Genuchten model (1980) at 1 km resolution. The numerical experiments were conducted to understand the impact of homogeneous SHPs as compared to the three-layered parameterization of the soil profile. It was seen that the SHPs estimated using the downscaled soil moisture (I-d experiment) performed with similar efficiency as compared to SHPs estimated from the in-situ soil moisture data (I-b experiment) in simulating the soil moisture. The normalized root mean square error (nRMSE) for the two treatments was 0.37 and 0.34, respectively. It was also noted that nRMSE for the treatment with the utilization of default SHPs (I-a) and AMSR-2 soil moisture (I-c) were found to be 0.50 and 0.43, respectively. (III) Finally, the derived SHPs were used to simulate both surface soil moisture and RZSM. The final product, RZSM which is the daily 1 km product also showed a nearly 80% correlation at the test site. The estimated SHPs are seen to improve the mean NSE from 0.10 (I-a experiment) to 0.50 (I-d experiment) for the surface soil moisture simulation. The mean nRMSE for the same was found to improve from 0.50 to 0.31. [ABSTRACT FROM AUTHOR]

The Hydrus-1D model is widely used for soil water content (SWC) simulations, wherein the exact configuration of soil hydraulic parameters is key to accuracy. To assess the feasibility of using "low-cost" multi-source remote sensing data to optimize the parameters of the Hydrus-1D model, five types of soil hydrodynamic parameter acquisition methods were designed for comparative evaluation, including the use of default parameters for soil texture types (DSHP), predictions from three and five soil mechanical composition parameters (NNP3/NNP5), inverse solutions from measured historical data (ISHD), and innovative introduction of historical remote sensing data (ERA-5 land reanalysis information and MODIS LAI products) instead of ground measured data for the inverse solution (ISRS). Two spring maize crops were planted in Beijing, China, in 2021 and 2022. Meteorological, soil, and crop data were collected as real measurements of the true values during the growth period. The boundary flux characteristics of the model simulation results were analyzed. The accuracy differences in the five approaches were compared from three perspectives: overall root zone, growth stage, and soil depth. The results showed that (1) evapotranspiration was the main pathway for soil water depletion in the root zone of maize; the actual total evapotranspiration accounted for 68.26 and 69.43% of the total precipitation in 2012 and 2022, respectively. (2) The accuracy of the SWC simulations in the root zone was acceptable for different approaches in the following order: NNP5 (root mean squared error (RMSE) = 5.47%) > ISRS (RMSE = 5.48%) > NNP3 (RMSE = 5.66%) > ISHD (RMSE = 5.68%) > DSHP (RMSE = 6.57%). The ISRS approach based on remote sensing data almost achieved the best performance while effectively reducing the workload and cost. (3) The accuracy of the SWC simulation at different growth stages was ranked as follows: seedling stage (mean absolute error (MAE) = 3.29%) > tassel stage (MAE = 4.68%) > anthesis maturity stage (MAE = 5.52%). (4) All approaches' simulation errors exhibited a decreasing trend with increasing soil depth. The ISHD approach, based on the measured data, achieved the best performance at a depth of 60 cm (MAE = 2.8%). The Hydrus-1D model optimized using multi-source remote sensing data can effectively simulate SWC in the maize root zone with low working cost, which is significant for applications in areas where it is difficult to obtain field soil hydrodynamic property parameters to simulate SWC at a global scale. [ABSTRACT FROM AUTHOR]

The variability of surface roughness may lead to relatively large dynamic of backscatter coefficient observed by the synthetic aperture radar (SAR), which complicates the soil moisture (SM) retrieval process based on active remote sensing. The effective roughness parameters are commonly used for parameterizing the soil scattering models, the values of which are often assumed to be constant during different study periods for the same site. This paper investigates the reasonableness of this hypothesis from the perspective of backscatter coefficient simulation and SM retrieval using high resolution SAR data. Three years of Sentinel-1A data from 2016 to 2018 were collected over a sparsely vegetated field within the REMEDHUS SM monitoring network. The advanced integral equation model (AIEM) and Dobson dielectric mixing model were combined for optimizing the effective roughness parameters, as well as simulating the backscatter coefficient and retrieving the SM. The effective roughness parameters were optimized at different temporal periods, such as 2016, 2017, 2018, 2016 + 2017, 2017 + 2018, and 2016 + 2017 + 2018, to analyze their temporal dynamics. It was found that: (1) the effective roughness parameters optimized at different temporal periods are very close to each other; (2) the simulated backscatter from AIEM is consistent with Sentinel-1A observation with root mean square errors (RMSEs) between 1.133 and 1.163 dB and correlation coefficient ® value equals to 0.616; (3) the seasonal dynamics ofin situ SM is well-captured by the retrieved SM with R values floating at 0.685 and RMSEs ranging from 0.049 to 0.052 m3/m3; and (4) inverse of the AIEM with the implementation of effective roughness parameters achieves better performance for SM retrieval than the change detection method. These findings demonstrate that the assumption on the constant effective roughness parameters during the study period of at least three years is reasonable. [ABSTRACT FROM AUTHOR]

The spatial resolution of current soil moisture (SM) products is generally low, consequently limiting their applications. In this study, a deep belief network-based method (DBN) was used to downscale the Soil Moisture Active Passive (SMAP) L4 SM product. First, the factors affecting soil surface moisture were analyzed, and the significantly correlated ones were selected as predictors for the downscaling model. Second, a DBN model was trained and used to downscale the 9 km SMAP L4 SM to 1 km in the study area on 25 September 2019. Validation was performed using original SMAP L4 SM data and in situ measurements from SM and temperature wireless sensor network with 34 sites. Finally, the DBN method was compared with another commonly used machine learning model-random forest (RF). Results showed that (1) the downscaled 1 km SM data are in good agreement with the original SMAP L4 SM data and field measured data, and (2) DBN has a higher correlation coefficient and a lower root mean square error than those of RF. The coefficients of determination for fitting the two models with the measured data at the site were 0.5260 and 0.4816, with relative mean square errors of 0.0303 and 0.0342 m3/m3, respectively. The study also demonstrated the applicability of the DBN method to AMSR SM data downscaling besides SMAP. The proposed method can provide a framework to support future hydrological modeling, regional drought monitoring, and agricultural research. [ABSTRACT FROM AUTHOR]

Soil moisture is an important parameter affecting environmental processes such as hydrology, ecology, and climate. Synthetic aperture radar (SAR) microwave remote sensing is an important means of farmland surface soil moisture (SSM) measurement. The inversion of farmland SSM by microwave remote sensing is greatly affected by vegetation cover. To address this problem, a multisource remote sensing inversion method of farmland SSM based on feature optimization and machine learning is proposed in this paper. Six typical machine learning algorithms suitable for small sample training, including random forest, radial basis function neural network, generalized regression neural network, support vector regression, genetic algorithm–back propagation neural network, and extreme learning machine, were selected in this paper. The features extracted from Sentinel-1/2 and Radarsat-2 remote sensing data were analyzed by Pearson correlation, and those with high correlation coefficients were selected to form the optimal feature subset as the input for the subsequent machine learning models. Then, the SSM collaborative inversion models under different machine learning algorithms were constructed, and comparative experiments were set up to select the optimal prediction model. The models' accuracy under different feature parameters were studied, and the difference in the performance between the dual-polarization SAR data and the quad-polarization SAR data in SSM inversion was explored. The experimental results showed that among the six models, the random forest model had a higher inversion accuracy, with a coefficient of determination of 0.6395 and a root mean square error of 0.0264 cm3/cm3. Meanwhile, the inversion accuracy could be greatly improved after feature optimization, and the inversion accuracy of the quad-polarization SAR data combined with optical remote sensing data, was better than that of the dual-polarization SAR data combined with optical remote sensing data. [ABSTRACT FROM AUTHOR]

Intermittent records of satellite soil moisture data are major obstacles that constrain their hydrometeorological applications. Based on the European Space Agency Climate Change Initiative (ESA CCI) soil moisture combined product, two machine learning models were employed to reconstruct soil moisture in China during 1979–2019 in both temporal and spatial domains, and latent errors for reconstructed series, as well as their performances for tracing climate extremes, were analyzed. The results showed that with the homogeneity of available data over space, the spatial approach performed well in reproducing the spatial heterogeneity of soil moisture (with medians of the correlation coefficient (CC) above 0.8 and root mean square errors (RMSEs) ranging from 0.02 to 0.03 m3∙m−3). The temporal approach (CC values of 0.7 and RMSEs ranging between 0.02 and 0.03 m3∙m−3) was superior in capturing the seasonality features and the timely and accurate mapping of short-term soil moisture dynamics impacted by rainstorms. However, both approaches failed to identify the location and severity of droughts accurately. The findings highlight the benefits of combining the strengths of both temporal and spatial gap-filling approaches for improving the estimation of missing values and hydrometeorological applications. [ABSTRACT FROM AUTHOR]

The tempo-spatial continuous soil moisture (SM) datasets of satellite remote sensing, land surface models, and reanalysis products are very important for correlational research in the Tibetan Plateau (TP) meteorology. Based on the in situ observed SM, AMSR2, SMAP, GLDAS-Noah, and ERA5 SM are assessed at regional and site scales in the TP during the non-frozen period from 2015 to 2016. The results indicate that SMAP and ERA5 SM (AMSR2 and GLDAS-Noah SM) present an overestimation (underestimation) of the TP regional average. Specifically, SMAP (ERA5) SM performs best in Maqu and south-central TP (Naqu, Pali, and southeast TP), with a Spearman's rank correlation (ρ) greater than 0.57 and an unbiased root mean square error (ubRMSE) less than 0.05 m3/m3. In Shiquanhe, GLDAS-Noah SM performs best among the four SM products. At the site scale, SMAP SM has relatively high ρ and low ubRMSE values at the most sites, except the sites at the Karakoram Mountains and Himalayan Mountains. The four SM products show underestimation in different degrees at Shiquanhe. The ρ values between AMSR2 SM and rainfall are the highest in most study subregions, especially in Naqu and Pali. For the other SM products, they have the highest positive correlations with a normalized difference vegetation index (NDVI). Besides, land surface temperature (LST) has significant negative (positive) correlations with SM products in the summer (other seasons). Through the multiple linear stepwise regression analysis, NDVI has negative (positive) impacts on SM products in the spring (other seasons), while LST shows the opposite conditions. NDVI (rainfall) is identified as the main influencing factor on the in situ observed, SMAP, GLDAS-Noah, and ERA5 (AMSR2) SM in this study. Compared to previous studies, these results comprehensively present the applicability of SM products in the TP and further reveal their main influencing factors. [ABSTRACT FROM AUTHOR]

X-band KOMPSAT-5 provides a good perspective for soil moisture retrieval at high-spatial resolution over arid and semi-arid areas. In this paper, an intercomparison of KOMPSAT-5 and C-band Sentinel-1 radar data in soil moisture retrieval was conducted over agricultural fields in Wimmera, Victoria, Australia. Optical images from Sentinel-2 were also used to calculate the scattering contribution of vegetation. This study employed a new semi-empirical vegetation scattering model with a linear association of soil moisture with observed backscatter coefficient and vegetation indices. The Combined Vegetation Index (CVI) was proposed and first used to parameterize vegetation water content. As a result, the vegetation scattering model was developed to monitor soil moisture based on remotely sensed data and ground measurements. Application of the algorithm over dryland wheat field sites demonstrated that the estimated satellite-based soil moisture contents have good linear relationships with the ground measurements. The correlation coefficients (R) are 0.862 and 0.616, and the root mean square errors (RMSEs) have the values of 0.020 cm3/cm3 and 0.032 cm3/cm3 at X- and C-bands, respectively. Furthermore, the validation results also indicated that X-band provided higher consistent accuracy for soil moisture inversion than C-band. These results showed significant promise in retrieving soil moisture using KOMPSAT-5 and Sentinel-1 remotely sensed data at high-spatial resolution over agricultural fields, with subsequent uses for crop growth and yield estimation. [ABSTRACT FROM AUTHOR]

To compare the accuracy of satellite salinity data of level-3 Soil Moisture Active Passive V4.0 (SSMAP) and debiased v5 CATDS level-3 Soil Moisture and Ocean Salinity (SSMOS) before and after tropical cyclones (TCs) in the Bay of Bengal (BoB), this study used the sea surface salinity of Argo (SArgo) to assess SSMAP and SSMOS before and after the passage of 10 TCs from 2015 to 2019. The results indicate that the SSMAP and SSMOS agreed well with SArgo before and after 10 TCs. It can be seen that the correlation between SSMAP and SArgo (before TCs: SSMAP = 0.95SArgo + 1.52, R2 = 0.83; after TCs: SSMAP = 0.87SArgo + 4.34, R2 = 0.79) was obviously higher than that of SSMOS and SArgo (before TCs: SSMOS = 0.68SArgo + 10.38, R2 = 0.62; after TCs: SSMOS = 0.88SArgo + 3.98, R2 = 0.58). The root mean square error (RMSE) was also significantly higher between SSMOS and SArgo (before TCs: 0.84 psu; after TCs: 0.78 psu) than between SSMAP and SArgo (before TCs: 0.58 psu; after TCs: 0.47 psu). In addition, this study compared SSMAP and SSMOS during two TCs that swept in nearshore and offshore waters, and the results show good agreement between SSMAP and SArgo in the nearshore and offshore waters of BoB. In the BoB, both SSMAP and SSMOS can retrieve sea surface salinity well, and SSMAP is overall better than SSMOS, but the SMOS salinity product can fill the gap of SMAP from 2010 to 2015. [ABSTRACT FROM AUTHOR]

The reflection of Global Navigation Satellite Systems (GNSS) signals, namely GNSS-Reflectometry (GNSS-R), has recently proven to be able to monitor land surface properties in the microwave spectrum, at a global scale, and with very low revisiting time. Moreover, this new technique has numerous additional advantages, including low cost, low power consumption, lightweight and small payloads, and near real-time massive data availability, as compared to conventional monostatic microwave remote sensing. However, the GNSS-R surface reflectivity values estimated through the bistatic radar equation, and the Fresnel coefficients have shown a lack of coincidence with real surface reflectivity data, mostly due to calibration issues. Previous studies have attempted to avoid this matter with direct regression methods between uncalibrated GNSS-R reflectivity data and external soil moisture content (SMC) products. However, calibration of GNSS-R reflectivity used in traditional inversion models is still a challenge, such as those to estimate SMC, freeze/thaw, or biomass. In this paper, a successful procedure for GNSS-R reflectivity calibration is established using data from the CYGNSS (Cyclone GNSS) constellation. The scale and bias parameters are estimated from the theoretical dielectric properties of water and dry sand, which are well-known and empirically validated values. We employ four calibration areas that provide maximum range limits of reflectivity, such as deserts and wetlands. The CYGNSS scale factor and the bias parameter resulted in a = 3.77 and b = 0.018, respectively. The derived scale and bias parameters are applied to the CYGNSS dataset, and the retrieved SMC values through the Fresnel reflection coefficients are in excellent agreement with the Soil Moisture Active Passive (SMAP) SMC product. Then, the SMAP SMC is used as a reference true value, and provides a standard linear regression with an R-square coefficient of 0.803, a root mean square error (RMSE) of 0.084, and a Pearson's correlation coefficient of 0.896. [ABSTRACT FROM AUTHOR]

Land surface model is a powerful tool for estimating continuous soil water content (SWC) and surface fluxes. However, simulation error tends to accumulate in the process of model simulation due to the inevitable uncertainties of forcing data and the intrinsic model errors. Data assimilation techniques consider the uncertainty of the model, update model states during the simulation period, and therefore improve the accuracy of SWC and surface fluxes estimation. In this study, an Ensemble Kalman Filter (EnKF) technique was coupled to a Hydrologically Enhanced Land Process (HELP) model to update model states, including SWC and surface temperature (Ts). The remotely sensed latent heat flux (LE) estimated by Surface Energy Balance System (SEBS) was used as the observation value in the data assimilation system to update the model states such as SWC and Ts, etc. The model was validated by the observation data in 2006 at the Weishan flux station, where the open-loop estimation without state updating was treated as the benchmark run. Results showed that the root mean square error (RMSE) of SWC was reduced by 30%~50% compared to the benchmark run. Meanwhile, the surface fluxes also had significant improvement to different extents, among which the RMSE of LE estimation from the wheat season and maize season reduced by 33% and 44%, respectively. The application of the data assimilation technique can substantially improve the estimation of surface fluxes and SWC states. It is suggested that the data assimilation system has great potential to be used in the application of land surface models in agriculture and water management. [ABSTRACT FROM AUTHOR]

This paper presents a soil moisture retrieval scheme from Cyclone Global Navigation Satellite System (CYGNSS) delay-Doppler maps (DDMs) over land. The proposed inversion method consists of a hybrid global and local optimization method and a physics-based bistatic scattering forward model. The forward model was developed for bare-to-densely vegetated terrains, and it predicts the circularly polarized bistatic radar cross section DDM of the land surface. This method was tested on both simulated DDMs and CYGNSS DDMs over the Soil Moisture Active Passive (SMAP) Yanco core validation site in Australia. About 250 CYGNSS DDMs from 2019 and 2020 over the Yanco site were used for validation. The simulated DDMs were for grassland and forest vegetation types. The vegetation type of the Yanco validation site was grassland. The vegetation water content (VWC) was 0.19   kg m − 2 and 4.89   kg m − 2 for the grassland and forest terrains, respectively. For the case when the surface roughness is known to the algorithm, the unbiased root mean square error (ubRMSE) of soil moisture estimates was less than 0.03   m 3 m − 3 while it was approximately 0.06   m 3 m − 3 and 0.09   m 3 m − 3 for the validation results from 2019 and 2020, respectively. The retrieval algorithm generally had enhanced performance for smaller values of soil moisture. For the case when both the soil moisture and surface roughness are unknown to the algorithm and only a single DDM is used for retrieval, the validation results showed an expected reduced performance, with an an ubRMSE of less than 0.12   m 3 m − 3 . [ABSTRACT FROM AUTHOR]

Soil moisture (SM), an important variable in water conversion between the atmosphere and terrestrial ecosystems, plays a crucial role in ecological processes and the evolution of terrestrial ecosystems. Analyzing and exploring SM's processes and influencing factors in different permafrost regions of the Qinghai-Tibet Plateau (QTP) can better serve the regional ecological security, disaster warning, water management, etc. However, the changes and future trends of SM on the QTP in recent decades are uncertain, and the main factors affecting SM are not fully understood. The study used SM observations, the Global Land Evapotranspiration Amsterdam Model (GLEAM) SM products, meteorological and vegetation data, Mann–Kendall test, Theil–Sen estimation, Ensemble Empirical Mode Decomposition (EEMD), and correlation methods to analyze and explore the characteristics and influencing factors of SM change in different permafrost regions of the QTP. The results show that: (1) At the pixel scale, GLEAM SM products can better reflect SM changes in the QTP in the warm season. The seasonal permafrost region is closer to the real SM than the permanent region, with a median correlation coefficient (R) of 0.738, median bias of 0.043 m3 m−3, and median unbiased root mean square errors (ubRMSE) of 0.031 m3 m−3. (2) The average SM in the QTP warm season increased at a rate of 0.573 × 10−3 m3 m−3 yr−1 over the recent 40 years, and the trend accelerated from 2005–2020. In 64.31% of the region, the soil was significantly wetted, mainly distributed in the permafrost region, which showed that the wetting rate in the dry region was faster than in the wet region. However, the wetting trend does not have a long-term continuity and has a pattern of "wetting–drying-wetting" on interannual and decadal levels, especially in the seasonal permafrost region. (3) More than 65% of the SM wetting trend on the QTP is caused by temperature, precipitation, and vegetation. However, there is apparent spatial heterogeneity in the different permafrost regions and vegetation cover conditions, and the three factors have a more substantial explanatory power for SM changes in the seasonal permafrost region. With the global climate change, the synergistic SM–Climate–Vegetation effect on the QTP tends to be more evident in the seasonal permafrost region. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) is a crucial driving variable for the global land surface-atmosphere water and energy cycle. There are now many satellite-based SM products available internationally and it is necessary to consider all available SM products under the same context for comprehensive assessment and inter-comparisons at the global scale. Moreover, product performances varying with dynamic environmental factors, especially those closely related to retrieval algorithms, were less investigated. Therefore, this study evaluated and identified the relative strengths of nine mainstream satellite-based SM products derived from the Advanced Microwave Scanning Radiometer 2 (AMSR2), Chinese Fengyun-3B (FY3B), the Soil Moisture Active Passive (SMAP), the Soil Moisture and Ocean Salinity (SMOS), and the European Space Agency (ESA) Climate Change Initiative (CCI) by using the Pearson correlation coefficient (R), R of SM seasonal anomalies (Ranom), unbiased Root Mean Square Error (ubRMSE), and bias metrics against ground observations from the International Soil Moisture Network (ISMN), as well as the Global Land Data Assimilation System (GLDAS) Noah model simulations, overall and under three dynamic (Land Surface Temperature (LST), SM, and Vegetation Optical Depth (VOD)) conditions. Results showed that the SMOS-INRA-CESBIO (IC) product outperformed the SMOSL3 product in most cases, especially in Australia, but it exhibited greater variability and higher random errors in Asia. ESA CCI products outperformed other products in capturing the spatial dynamics of SM seasonal anomalies and produced significantly high accuracy in croplands. Although the Chinese FY3B presented poor skills in most cases, it had a good ability to capture the temporal dynamics of the original SM and SM seasonal anomalies in most regions of central Africa. Under various land cover types, with the changes in LST, SM, and VOD, different products exhibited distinctly dynamic error characteristics. Generally, all products tended to overestimate the low in-situ SM content but underestimate the high in-situ SM content. It is expected that these findings can provide guidance and references for product improvement and application promotions in water exchange and land surface energy cycle. [ABSTRACT FROM AUTHOR]

Several studies currently strive to improve the spatial resolution of coarse scale high temporal resolution global soil moisture products of SMOS, SMAP, and ASCAT. Soil texture heterogeneity is known to be one of the main sources of soil moisture spatial variability. With the recent development of high resolution maps of basic soil properties such as soil texture and bulk density, relevant information to estimate soil moisture variability within a satellite product grid cell is available. We use this information for the prediction of the sub-grid soil moisture variability for each SMOS, SMAP, and ASCAT grid cell. The approach is based on a method that predicts the soil moisture standard deviation as a function of the mean soil moisture based on soil texture information. It is a closed-form expression using stochastic analysis of 1D unsaturated gravitational flow in an infinitely long vertical profile based on the Mualem-van Genuchten model and first-order Taylor expansions. We provide a look-up table that indicates the soil moisture standard deviation for any given soil moisture mean, available at https://doi.org/10.1594/PANGAEA.878889. The resulting data set helps identify adequate regions to validate coarse scale soil moisture products by providing a measure of representativeness of small-scale measurements for the coarse grid cell. Moreover, it contains important information for downscaling coarse soil moisture observations of the SMOS, SMAP, and ASCAT missions. In this study, we present a simple application of the estimated sub-grid soil moisture heterogeneity scaling down SMAP soil moisture to 1 km resolution. Validation results in the TERENO and REMEDHUS soil moisture monitoring networks in Germany and Spain, respectively, indicate a similar or slightly improved accuracy for downscaled and original SMAP soil moisture in the time domain for the year 2016, but with a much higher spatial resolution. [ABSTRACT FROM AUTHOR]

Soil organic matter (SOM) is an important parameter of soil fertility, and visible and near-infrared (VIS-NIR) spectroscopy combined with multivariate modeling techniques have provided new possibilities to estimate SOM. However, the spectral signal is strongly influenced by soil moisture (SM) in the field. Interest in using spectral classification to predict soils in the moist conditions tominimize the influence of SMis growing. The objective of this study was to investigate the transferability of two approaches, SM-based cluster method with known SM(classifying the VIS-NIR spectra into different SM clusters to develop models separately), the normalized soil moisture index (NSMI)-based cluster method with unknown SM(utilizing NSMI to indicate the SM and establish models separately), to predict SOM directly in moist soil spectra. One hundred and twenty one soil samples were collected from Central China, and eight SM levels were obtained for each sample through rewetting experiments. Their reflectance spectra and SOMconcentrations were measured in the laboratory. Partial least square-support vector machine (PLS-SVM) was employed to construct SOMprediction models. Specifically, prediction models were developed for NSMI-based clusters with unknown SMdata. The models were assessed through three statistics in the processes of calibration and validation: the coefficient of determination (R2), root mean square error (RMSE) and the ratio of the performance to deviation (RPD). Results showed that the variable SMled to reduced VIS-NIR reflectance nonlinearly across the entire spectral range. NSMI was an effective spectral index to indicate the SM. Classifying the VIS-NIR spectra into different SMclusters in known SMstates could improve the performance of PLS-SVMmodels to acceptable prediction accuracies (R2cv = 0.69-0.77, RPD = 1.79-2.08). The estimation of SOM, when using the NSMI-based cluster method with unknown SM(RPD = 1.95-2.04), was similar to the use of the SM-based cluster method with known SM (RPD = 1.79-2.08). The predictive results (RPD = 1.87-2.06) demonstrated that the NSMI-based cluster method has potential for application outside the laboratory for SOMprediction without knowing the SMexplicitly, and this method is also easy to carry out and only requires spectral information. [ABSTRACT FROM AUTHOR]

To apply satellite-retrieved soil moisture to a short-range weather prediction, we review a stochastic approach for reducing foot print scale biases and estimating its uncertainties. First, we discuss a challenge of representativeness errors. Before describing retrieval errors in more detail, we clarify a conceptual difference between error and uncertainty in basic metrological terms of the International Organization for Standardization (ISO), and briefly summarize how current retrieval algorithms deal with a challenge of land surface heterogeneity. As compared to relative approaches such as Triple Collocation, or cumulative distribution function (CDF) matching that aim for climatology stationary errors at time-scale of years, we address a stochastic approach for reducing instantaneous retrieval errors at time-scale of several hours to days. The stochastic approach has a potential as a global scheme to resolve systematic errors introducing from instrumental measurements, geo-physical parameters, and surface heterogeneity across the globe, because it does not rely on the ground measurements or reference data to be compared with. [ABSTRACT FROM AUTHOR]

The spatiotemporal distribution of soil moisture over the Tibetan Plateau is important for understanding the regional water cycle and climate change. In this paper, the surface soil moisture in the northeastern Tibetan Plateau is estimated from time-series VV-polarized Sentinel-1A observations by coupling the water cloud model (WCM) and the advanced integral equation model (AIEM). The vegetation indicator in the WCM is represented by the leaf area index (LAI), which is smoothed and interpolated from Terra Moderate Resolution Imaging Spectroradiometer (MODIS) LAI eight-day products. The AIEM requires accurate roughness parameters, which are parameterized by the effective roughness parameters. The first halves of the Sentinel-1A observations from October 2014 to May 2016 are adopted for the model calibration. The calibration results show that the backscattering coefficient (σº) simulated from the coupled model are consistent with those of the Sentinel-1A with integrated Pearson's correlation coefficients R of 0.80 and 0.92 for the ascending and descending data, respectively. The variability of soil moisture is correctly modeled by the coupled model. Based on the calibrated model, the soil moisture is retrieved using a look-up table method. The results show that the trends of the in situ soil moisture are effectively captured by the retrieved soil moisture with an integrated R of 0.60 and 0.82 for the ascending and descending data, respectively. The integrated bias, mean absolute error, and root mean square error are 0.006, 0.048, and 0.073 m3/m3 for the ascending data, and are 0.012, 0.026, and 0.055 m3/m3 for the descending data, respectively. Discussions of the effective roughness parameters and uncertainties in the LAI demonstrate the importance of accurate parameterizations of the surface roughness parameters and vegetation for the soil moisture retrieval. These results demonstrate the capability and reliability of Sentinel-1A data for estimating the soil moisture over the Tibetan Plateau. It is expected that our results can contribute to developing operational methods for soil moisture retrieval using the Sentinel-1A and Sentinel-1B satellites. [ABSTRACT FROM AUTHOR]

At radar frequencies below 2 GHz, the mismatch between the 5 to 15 cm sensing depth of classical time domain reflectometry (TDR) probe soil moisture measurements and the radar penetration depth can easily lead to unreliable in situ data. Accurate quantitative measurements of soil water contents at various depths by classical methods are cumbersome and usually highly invasive. We propose an improved method for the estimation of vertical soil moisture profiles from multi-offset ground penetrating radar (GPR) data. A semi-automated data acquisition technique allows for very fast and robust measurements in the field. Advanced common mid-point (CMP) processing is applied to obtain quantitative estimates of the permittivity and depth of the reflecting soil layers. The method is validated against TDR measurements using data acquired in different environments. Depth and soil moisture contents of the reflecting layers were estimated with root mean square errors (RMSE) on the order of 5 cm and 1.9 Vol.-%, respectively. Application of the proposed technique for the validation of synthetic aperture radar (SAR) soil moisture estimates is demonstrated based on a case study using airborne L-band data and ground-based P-band data. For the L-band case we found good agreement between the near-surface GPR estimates and extended integral equation model (I2EM) based SAR retrievals, comparable to those obtained by TDR. At the P-band, the GPR based method significantly outperformed the TDR method when using soil moisture estimates at depths below 30 cm. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) retrieval from SMOS (the Soil Moisture and Ocean Salinity mission) and SMAP (the Soil Moisture Active/Passive mission) passive microwave data over forested areas with required accuracy is of great significance and poses some challenges. In this paper, we used Ground Wireless Sensor Network (GWSN) SM measurements from 9 September to 5 November 2015 to validate SMOS and SMAP Level 3 (L3) SM products over forested areas in northeastern China. Our results found that neither SMOS nor SMAP L3 SM products were ideal, with respective RMSE (root mean square error) values of 0.31 cm³/cm³ and 0.17 cm³/cm³. Nevertheless, some improvements in SM retrieval might be achievable through refinements of the soil dielectric model with respect to high percentage of soil organic matter (SOM) in the forested area. To that end, the potential of the semi-empirical soil dielectric model proposed by Jun Liu (Liu's model) in improving SM retrieval results over forested areas was investigated. Introducing Liu's model into the retrieval algorithms of both SMOS and SMAP missions produced promising results. For SMAP, the RMSE of L3 SM products improved from 0.16 cm³/cm³ to 0.07 cm³/cm³ for AM (local solar time around 06:00 am) data, and from 0.17 cm³/cm³ to 0.05 cm³/cm³ for PM (local solar time around 06:00 pm) data. For SMOS ascending orbit products, the accuracy was improved by 56%, while descending orbit products improved by 45%. [ABSTRACT FROM AUTHOR]

Soil moisture products acquired from passive satellite missions have been widely applied in environmental processes. A primary challenge for the use of soil moisture products from passive sensors is their reliability. It is crucial to evaluate the reliability of those products before they can be routinely used at a global scale. In this paper, we evaluated the Soil Moisture Active/Passive (SMAP) and the Advanced Microwave Scanning Radiometer (AMSR2) radiometer soil moisture products against in situ measurements collected from American networks with four statistics, including the mean difference (MD), the root mean squared difference (RMSD), the unbiased root mean square error (ubRMSE) and the correlation coefficient (R). The evaluation results of SMAP and AMSR2 soil moisture products were compared. Moreover, the triple collocation (TC) error model was used to assess the error among AMSR2, SMAP and in situ data. The monthly average and daily AMSR2 and SMAP soil moisture data were analyzed. Different spatial series, temporal series and combined spatial-temporal analysis were carried out. The results reveal that SMAP soil moisture retrievals are generally better than AMSR2 soil moisture data. The remotely sensed retrievals show the best agreement with in situ measurements over the central Great Plains and cultivated crops throughout the year. In particular, SMAP soil moisture data shows a stable pattern for capturing the spatial distribution of surface soil moisture. Further studies are required for better understanding the SMAP soil moisture product. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) is a crucial component for understanding, modeling, and forecasting terrestrial water cycles and energy budgets. However, estimating field-scale SM based on thermal infrared remote-sensing data is still a challenging task. In this study, an improved Flexible Spatiotemporal DAta Fusion (FSDAF) method based on land-surface Diurnal Temperature Cycle (DTC) model (DFSDAF) was proposed to fuse Moderate Resolution Imaging Spectroradiometer (MODIS) and Advance Spaceborne Thermal Emission and Reflection Radiometer (ASTER) land-surface temperature (LST) data to generate ASTER-like LST during the night. The reconstructed diurnal LST data at a high spatial resolution (90 m) was then utilized to drive a two-source normalized soil thermal inertia model (TNSTI) for the vegetated surfaces to estimate field-scale SM. The results of the proposed methods were validated at different observation depths (2, 4, 10, 20, 40, 60, and 100 cm) over the Zhangye oasis in the middle region of the Heihe River basin in the northwest of China and were compared with the SM estimates from the TNSTI model and other SM products, including AMSR2/AMSR-E, GLDAS-Noah, and ERA5-land. The results showed the following: (1) The DFSDAF method increased the accuracy of LST prediction, with the determination coefficient (R2) increasing from 0.71 to 0.77, and root mean square error (RMSE) decreasing from 2.17 to 1.89 K. (2) the estimated SMs had the best correlation with the observations at the 10 cm depth (with R2 of 0.657; RMSE of 0.069 m3/m3), but the worst correlation with observations at the 40 cm depth (with R2 of 0.262; RMSE of 0.092 m3/m3); meanwhile, the modeled SMs were significantly underestimated above 40 cm (2, 4, 10, and 20 cm) and slightly overestimated below 40 cm (60 and 100 cm); in addition, the field-scale SM series at high spatial resolution (90 m) showed significant spatiotemporal variation. (3) The SM estimates based on the TNSTI for the vegetated surfaces are more capable of characterizing the SM status in the root zone (~80 cm) or even deeper, while the SMs from AMSR2/AMSR-E, GLDAS-Noah, or ERA5-land products are closer to the SM in the surface layer (the depth is less than 5 cm). The TNSTI provided favorable data supports for hydrological model simulations and showed potential advantages for agricultural refinement managements and smart agriculture. [ABSTRACT FROM AUTHOR]

The Soil Moisture Active Passive (SMAP) mission with high-precision soil moisture (SM) retrieval products provides global daily composites of SM at 3, 9, and 36 km earth grids measured by L-band active and passive microwave sensors. The capability of passive microwave remote sensing has been recognized for the estimation of SM variations. The purpose of this work was to establish an interaction between the highly variable SM spatial distribution on the ground and the SMAP's coarse resolution radiometer-based SM retrievals. In this work, SMAP Level 3 (L3) and Level 4 (L4) SM products are validated with in situ datasets observed from the different locations of the Soil Moisture Network within the ShanDian River (SMN-SDR) Basin over the period of January 2018 to December 2019. The values of the unbiased root mean square error (ubRMSE) for L3 (SPL3SMP_E) SM retrievals are close to the standard SMAP mission SM accuracy requirement of 0.04 m 3 / m 3 at the 9-km scale, with an averaged ubRMSE value of 0.041 m 3 / m 3 (0.050 m 3 / m 3 ) for descending (ascending) SM with the correlation (R) values of 0.62 (0.42) against the sparse network sites. The L4 (SPL4SMGP) Surface and Root-zone SM (RZSM) estimates show less error (ubRMSE < 0.04) and high correlation (R > 0.60) values, and are consistent with the previous SMAP-based SM estimations. The SMAP L4 SM products (SPL4SMGP) performed well compared to the L3 SM retrieval products (SPL3SMP_E). In vegetated land, the variability and compatibility of the SMAP SM estimates with the evaluation metrics for both products (L3 and L4) showed a good performance in the grassland, then in the farmland, and worst in the woodlands. Finally, SMAP algorithm parameters sensitivity analysis of the satellite products was conducted to produce time-series and highly precise SM datasets in China. [ABSTRACT FROM AUTHOR]

Waterlogging crop disasters are caused by continuous and excessive soil water in the upper layer of soil. In order to enable waterlogging monitoring, it is important to collect continuous and accurate soil moisture data. The distributed hydrology soil vegetation model (DHSVM) is selected as the basic hydrological model for soil moisture estimation and winter-wheat waterlogging monitoring. To handle the error accumulation of the DHSVM and the poor continuity of remote sensing (RS) inversion data, an agro-hydrological model that assimilates RS inversion data into the DHSVM is used for winter-wheat waterlogging monitoring. The soil moisture content maps retrieved from satellite images are assimilated into the DHSVM by the successive correction method. Moreover, in order to reduce the modeling error accumulation, monthly and real-time RS inversion maps that truly reflect local soil moisture distributions are regularly assimilated into the agro-hydrological modeling process each month. The results show that the root mean square errors (RMSEs) of the simulated soil moisture value at two in situ experiment points were 0.02077 and 0.02383, respectively, which were 9.96% and 12.02% of the measured value. From the accurate and continuous soil moisture results based on the agro-hydrological assimilation model, the waterlogging-damaged ratio and grade distribution information for winter-wheat waterlogging were extracted. The results indicate that there were almost no high-damaged-ratio and severe waterlogging damage areas in Lixin County, which was consistent with the local field investigation. [ABSTRACT FROM AUTHOR]

Evapotranspiration (ET), a key component of the hydrological cycle, has a direct impact on runoff and water balance. Various global satellite-based and numerical datasets provide continuous and high spatiotemporal resolution data, which makes it possible to calibrate hydrological parameters against ET. However, the accuracy of ET datasets varies with region and algorithm, introducing uncertainties in hydrological parameter calibration. This study focused on evaluating the potential of different ET datasets in the calibration of distributed hydrological model parameters. Five different ET datasets (PML, SEBAL, EB-ET, GLASS, REA-ET) were evaluated using the water balance method to explore the effect of intrinsic dataset accuracy on applications. The benchmark calibration scheme calibrated parameters by using observed streamflow data from the outlet. Two calibration schemes were proposed to take advantage of the temporal dynamics and spatial patterns of the raw ET datasets. The results show that the model parameters calibrated by all selected ET datasets produced satisfactory results in streamflow simulations. These results were dependent on the calibration schemes and accuracy of ET datasets. Overall, the scheme calibrated by using temporal dynamics of ET at the grid scale provided better streamflow simulations at the basin outlet than the scheme calibrated by using spatial patterns of ET at the basin scale. Three metrics (bias, root mean square error [RMSE], and correlation coefficient [R]) showed that there is a high potential for selected ET datasets to improve soil moisture simulations, as compared to the benchmark scheme. Parameters calibrated by EB-ET and PML datasets provided the best performance in the simulation of streamflow at the outlet and the sub-basin scale. The calibration case with the SEBAL dataset showed the highest potential to improve soil moisture simulation. The annual average ET estimates of these three datasets were closest to the water balance-based ET values. [ABSTRACT FROM AUTHOR]

This study estimates soil moisture content (SMC) using Sentinel-1A/B C-band synthetic aperture radar (SAR) images and an artificial neural network (ANN) over a 40 × 50-km2 area located in the Geum River basin in South Korea. The hydrological components characterized by the antecedent precipitation index (API) and dry days were used as input data as well as SAR (cross-polarization (VH) and copolarization (VV) backscattering coefficients and local incidence angle), topographic (elevation and slope), and soil (percentage of clay and sand)-related data in the ANN simulations. A simple logarithmic transformation was useful in establishing the linear relationship between the observed SMC and the API. In the dry period without rainfall, API did not decrease below 0, thus the Dry days were applied to express the decreasing SMC. The optimal ANN architecture was constructed in terms of the number of hidden layers, hidden neurons, and activation function. The comparison of the estimated SMC with the observed SMC showed that the Pearson's correlation coefficient (R) and the root mean square error (RMSE) were 0.85 and 4.59%, respectively. [ABSTRACT FROM AUTHOR]