Search

Abstract: While software-defined radars can switch their transmitted waveform on the go, they cannot transmit all waveforms at the same time, meaning they must balance the advantages and drawbacks of each configuration. Here, we propose theoretically and demonstrate experimentally the universal radar, which can apply the desired waveform in the post-processing stage after the physical measurement has been performed. This method also allows using a single measurement of a scene to design and test any other radar in complex scenarios without having to take it to the field. The method is based on post-processing the frequency response measured by a synthetically broadband stepped-frequency continuous wave radar, such as a vector network analyzer. An algorithm for overcoming distortions due to moving targets is derived as well. This approach not only provides an ultra-wideband software-only defined radar, but it also enables the acquired data from any measured site to be used for the design and analysis of almost any other future radar system, significantly cutting the time and cost of new developments. The method suggests the creation of radar raw data repositories that can be shared across diversely different radar platforms. [ABSTRACT FROM AUTHOR]

In this paper, to track maneuvering unmanned surface vehicles (USVs) in scenarios with clutter, we propose a novel method based on the probabilistic data association (PDA) algorithm and Rao-Blackwellized particle filter (RBPF) algorithm, and we further improve the tracking performance by Max-Q criterion-based waveform selection. This work develops a maneuvering target model in the context of clutter, integrating linear and nonlinear states as well as observations with false alarms. In order to jointly tackle the mixed-state tracking problem, the PDA algorithm is integrated into the RBPF framework. This allows it to be used with the complex nonlinear and linear hybrid system and helps to minimize the state dimensions of conventional particle filtering (PF). Additionally, by utilizing Q-learning principles, we provide a Max-Q-based criterion to select the waveform parameters, which guarantees low measurement errors and efficiently handles measurement uncertainties. Our simulation results show that the PDA-RBPF algorithm, which has a more appropriate tracking mechanism, produces results that are more accurate than those of the EKF or PF algorithms alone. Furthermore, the RMSE derived by the Max-Q-based criterion is smaller and more robust than that of other selection methods, as well as yielding a fixed waveform. Our proposed mechanism, which combines the concepts of PDA-RBPF and Max-Q waveform selection, performs well in target tracking tasks and exhibits relatively good performance over some existing ones. [ABSTRACT FROM AUTHOR]

Joint transceiver beamforming is a fundamental and crucial research task in the field of signal processing. Despite extensive efforts made in recent years, the joint transceiver beamforming of frequency diverse array (FDA)-based multiple-input and multiple-output (MIMO) radar has received relatively less attention and is confronted with some tricky challenges, such as range–angle decoupling and the interaction between multiple performance metrics. In this paper, we initially derive the generalized ambiguity function of the FDA-MIMO radar to explore the intrinsic correlation between its waveform design and resolution. Following that, the joint beamforming optimization is formulated as a nonconvex bivariate quadratic programming problem (NBQP) with the aim of maximizing the Signal-to-Interference-Noise Ratio (SINR) of the FDA-MIMO radar system. Building upon this, we introduce an innovative alternating manifold optimization with nested iteration (AMO-NI) algorithm to address the NBQP. By incorporating manifold optimization into iterative updates of transmit waveform and receiving filter, the AMO-NI algorithm considers the interdependencies among the optimization variables. The algorithm efficiently and expeditiously finds global optimum solutions within a finite number of iterations. Compared with other methods, our approach yields a superior beampattern and higher SINR. [ABSTRACT FROM AUTHOR]

A high-frequency surface wave radar (HFSWR) is the only sensor that provides inexpensive surveillance for up to 200 nautical miles (NM) of the exclusive economic zone in the 3–5 MHz band. However, because of its long wavelength, its angular resolution is low. Multiple-input multiple-output (MIMO) technology is an attractive method to improve angular resolution. This paper proposes MIMO waveforms and their processing that can be used in HFSWR systems. This dual modulation method applies linear frequency modulation to each pulse and orthogonal polyphase codes for a few consecutive pulses to enable MIMO processing. The proposed method can effectively remove the correlation of mutual interference and exhibits excellent performance in removing multiple-time-around echoes. [ABSTRACT FROM AUTHOR]

The conventional back projection (BP) algorithm is an accurate time-domain algorithm widely used for multiple-input multiple-output (MIMO) radar imaging, owing to its independence of antenna array configuration. The time-delay curve correction back projection (TCC-BP) algorithm greatly reduces the computational complexity of BP but suffers from spatial-variant correction, sidelobe interference and background noise due to the use of coherent superposition of echo time-delay curves. In this article, a residual attention U-Net-based (RAU-Net) MIMO radar imaging method that adapts complex noisy scenarios with spatial variation and sidelobe interference is proposed. On the basis of the U-Net underlying structure, we develop the RAU-Net with two modules: a residual unit with identity mapping and a dual attention module to obtain resolution spatial-variant correction and denoising on real-world MIMO radar images. The network realizes MIMO radar imaging based on the TCC-BP algorithm and substantially reduces the total computational time of the BP algorithm on the basis of improving the imaging resolution and denoising capability. Extensive experiments on the simulated and measured data demonstrate that the proposed method outperforms both the traditional methods and learning-imaging methods in terms of spatial-variant correction, denoising and computational complexity. [ABSTRACT FROM AUTHOR]

The problem of accurate source localization has been an area of focus in high-frequency surface wave radar (HFSWR) applications. However, antenna pattern distortion (APD) decreases the direction-of-arrival (DOA) estimation performance of the multiple signal classification (MUSIC) algorithm. Up to now, limited studies have been conducted on the calibration of antenna pattern distortion for phased arrays in HFSWR. In this paper, we first analyze the effect of APD on the performance of the MUSIC algorithm through estimation of accuracy and angular resolution. We demonstrate that using the actual pattern (or say APD) can improve DOA estimation performance. Based on this proposition, we propose a novel iterative calibration method that employs the first-order sea clutter data and can jointly estimate DOA and APD in an iterative way. To obtain available calibration points, we introduce the extraction methods of the first-order sea clutter spectrum and single-DOA spectrum points. Meanwhile, in each iteration, the Beamspace MUSIC algorithm and artificial hummingbird algorithm (AHA) are utilized to estimate the DOA and APD, respectively. Numerical results reveal a good coincidence between the actual pattern and the estimated APD. We also apply this method to process the experimental data of HFSWR. We obtain the APD vector of the real phased array and improve the direction-finding performance of several real ship targets using this vector. Both numerical and experimental results prove the correctness of our proposed calibration method. [ABSTRACT FROM AUTHOR]

In this paper, we address the problem of covariance matrix estimation for radar adaptive detection under non-Gaussian clutter. Traditional model-based estimators may suffer from performance loss due to the mismatch between real data and assumed models. Therefore, we resort to a data-driven deep-learning method and propose a covariance matrix estimation method based on a complex-valued convolutional neural network (CV-CNN). Moreover, a real-valued (RV) network with the same framework as the proposed CV network is also constructed to serve as a natural competitor. The obtained clutter covariance matrix estimation based on the network is applied to the adaptive normalized matched filter (ANMF) detector for performance assessment. The detection results via both simulated and real sea clutter illustrate that the estimator based on CV-CNN outperforms other traditional model-based estimators as well as its RV competitor in terms of probability of detection (PD). [ABSTRACT FROM AUTHOR]

In this study, we investigated two waveform design problems for a dual-functional radar communication (DFRC) system, taking into consideration different constrained communication quality-of-service (QoS) requirements. Our objective was to minimize the mean-square error (MSE) of radar beampattern matching as the cost function. To this end, the multi-user interference (MUI) energy constraint and constructive interference (CI) constraint were, respectively, formulated to ensure the communication QoS. It is important to note that we designed a strict per-user MUI energy constraint at each sampling moment to achieve more accurate control over communication performance. Additionally, we introduced a constant-modulus constraint to optimize the efficiency of the radio frequency (RF) amplifier. To tackle the nonconvex waveform design problems encountered, we employed the alternative direction methods of multipliers (ADMM) technique. This allowed us to decompose the original problem into two solvable subproblems, which were then solved using the majorization–minimization (MM) method and geometrical structure. Finally, we obtained extensive simulation results which demonstrate the effectiveness and superiority of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Realization and enhancement of detection techniques for multiple-input–multiple-output (MIMO) radar systems require polyphase code sequences with excellent orthogonality characteristics. Therefore, orthogonal waveform design is the key to realizing MIMO radar. Conventional orthogonal waveform design methods fail to ensure acceptable orthogonal characteristics by individually optimizing the autocorrelation sidelobe peak level and the cross-correlation sidelobe peak level. In this basis, the multi-objective Archimedes optimization algorithm (MOIAOA) is proposed for orthogonal waveform optimization while simultaneously minimizing the total autocorrelation sidelobe peak energy and total cross-correlation peak energy. A novel optimal individual selection method is proposed to select those individuals that best match the weight vectors and lead the evolution of these individuals to their respective neighborhoods. Then, new exploration and development phases are introduced to improve the algorithm's ability to increase its convergence speed and accuracy. Subsequently, novel incentive functions are formulated based on distinct evolutionary phases, followed by the introduction of a novel environmental selection method aimed at comprehensively enhancing the algorithm's convergence and distribution. Finally, a weight updating method based on the shape of the frontier surface is proposed to dynamically correct the shape of the overall frontier, further enhancing the overall distribution. The results of experiments on the orthogonal waveform design show that the multi-objective improved Archimedes optimization algorithm (MOIAOA) achieves superior orthogonality, yielding lower total autocorrelation sidelobe peak energy and total cross-correlation peak energy than three established methods. [ABSTRACT FROM AUTHOR]

The water-filling (WF) algorithm is a widely used design strategy in the radar waveform design field to maximize the signal-to-interference-plus-noise ratio (SINR). To address the problem of the poor resolution performance of the waveform caused by the inability to effectively control the bandwidth, a novel waveform-related optimization model is established in this paper. Specifically, a corrected SINR expression is first derived to construct the objective function in our optimization model. Then, equivalent bandwidth and energy constraints are imposed on the waveform to formulate the waveform-related non-convex optimization model. Next, the optimal frequency spectrum is obtained using the Karush–Kuhn–Tucker condition of our non-convex model. Finally, the transmit waveform in the time domain is synthesized under the constant modulus constraint. Different experiments based on simulated and real-measured data are constructed to demonstrate the superior performance of the designed waveform on the SINR and equivalent bandwidth compared to the linear frequency modulated signal and waveform designed by the WF algorithm. In addition, to further evaluate the effectiveness of the proposed algorithm in the application of cognitive radar (CR), a closed-loop radar system design strategy is introduced based on our waveform design method. The experiments under real-measured data confirm the advantages of CR compared to the traditional open-loop radar structure. [ABSTRACT FROM AUTHOR]

The traditional phased array radar is unable to distinguish mainlobe deceptive interference from the true target when they share an identical angle. To address this issue, a method is developed to suppress the interference in the joint transmit–receive–Doppler frequency domain, using secondary compensation and quadratic phase code (QPC) with the frequency diversity array multiple-input multiple-output (FDA-MIMO) radar. The QPC technique is employed by encoding the transmitted pulses in various spatial channels, which extends the degrees-of-freedom (DOFs) of the system. To distinguish and suppress the false targets behind the true target by at least one pulse, Doppler compensation is performed and Doppler filters are employed. To distinguish the fast-generated false targets, which are located in the same pulse with the true target, the spatial frequency compensation is implemented, which equivalently relocates the mainlobe interference to the sidelobes. Via the singular spectrum analysis (SSA) technique and the data-dependent beamforming, the interferences within the ambiguity region are suppressed. Simulation results verify the effectiveness of the method. [ABSTRACT FROM AUTHOR]

The Multiple Input Multiple Output (MIMO) radar, as a new type of radar, emits orthogonal waveforms, which provide it with waveform diversity characteristics, leading to increased degrees of freedom and improved target detection performance. However, it also poses challenges such as difficulty in meeting higher data demand, separating waveforms, and suppressing the multidimensional sidelobes (range sidelobes, Doppler sidelobes, and angle sidelobes) of targets. Phase-coded signals are frequently employed as orthogonal transmission signals in the MIMO radar. However, these signals exhibit poor Doppler sensitivity, and the intra-pulse Doppler frequency shift can have an impact on the effectiveness of the matching filtering process. To address the aforementioned concerns, this paper presents a novel approach called the Space–Time–Range Joint Adaptive Focusing and Detection (STRJAFD) method. The proposed method utilizes the Mean Square Error (MSE) criterion and integrates spatial, temporal, and waveform dimensions to achieve efficient adaptive focusing and detection of targets. The experimental results demonstrate that the proposed method outperforms conventional cascaded adaptive methods in effectively addressing the matching mismatch issue caused by Doppler frequency shift, achieving super-resolution focusing, possessing better suppression effects on three-dimensional sidelobes and clutter, and exhibiting better detection performance in low signal-to-clutter ratio and low signal-to-noise ratio environments. Furthermore, STRJAFD is unaffected by coherent sources and demands less data. [ABSTRACT FROM AUTHOR]

Due to the fast scanning speed of the current phased-array radar and the moving characteristics of the target, the moving target usually spans multiple beams during coherent integration time, which results in severe performance loss for target focusing and parameter estimation because of the unknown entry/departure beam time within the coherent period. To solve this issue, a novel focusing and detection method based on the multi-beam phase compensation function (MBPCF), multi-scale sliding windowed phase difference (MSWPD), and spatial projection are proposed in this paper. The proposed method mainly includes the following three steps. First, the geometric and signal models of multiple beam integration with observed moving targets are accurately established where the range migration (RM), Doppler frequency migration (DFM), and beam migration (BM) are analyzed. Based on that, the BM is eliminated by the MBPCF, the second-order keystone transform (SOKT) is utilized to mitigate the RM, and then, a new MSWPD operation is developed to estimate the target's entry/departure beam time, which realizes well-focusing output within the beam. After that, by dividing the radar detection area, the spatial projection (SP) method is adopted to obtain multiple-beams joint integration, and thus, improved detection performance can be obtained. Numerical experiments are carried out to evaluate the performance of the proposed method. The results show that the proposed method could achieve superior focusing and detection performances. [ABSTRACT FROM AUTHOR]

In the present complex electromagnetic environment, radar target detection is threatened by different kinds of interferences, especially mainlobe deceptive interference, which occupies the same energy distributions of targets spatially, meaning that targets and interferences cannot be discriminated. To make matters worse, the number of suppressible interferences is limited by the number of physical array elements, leading to the degradation of the suppression performance of traditional radar. In this work, we propose a frequency-increment-based interference suppression method for minimum redundancy frequency diverse array multiple-input multiple-output (MR-FDA-MIMO) radar, which effectively solves the aforementioned two problems. The interference suppression method consists of two steps: (i) in the sidelobe barrage interference suppression stage, the interference-plus-noise covariance matrix is reconstructed to overcome the influence of the true targets and mainlobe deceptive interference on the performance of the beamformer; (ii) in the mainlobe deceptive interference suppression stage, a nonadaptive beamforming method is employed to suppress mainlobe deceptive interference and overcome the impact of insufficient virtual samples on interference suppression performance. Additionally, we design a frequency-increment-based MR-FDA-MIMO radar, fully utilizing the advantages of the virtual array to enhance interference suppression performance and increase the number of interferences. Numerical experiments undertaken demonstrate the effectiveness of the algorithm under different scenarios. [ABSTRACT FROM AUTHOR]

In recent years, MIMO high-frequency surface wave radar (MIMO-HFSWR) plays an increasingly important role in sea surveillance because of its wide-area surveillance capabilities. In signal processing, the coherent targets with the same distance and speed can only be distinguished in the angle dimension. However, HF radar's angular resolution is poor because of the restrictions of the aperture, which causes aliasing of targets on the range–angle (RA) spectrum. Traditional super-resolution algorithms, such as MUSIC, are also inapplicable because of the targets' coherence. Therefore, the spatial smoothing algorithm is usually used to realize the decoherence of echo at the cost of array aperture. The loss of array aperture makes the algorithm fail when there are too many targets in the echo. Aiming at this problem, this paper proposes an iterative calculation method (iterative calculation via weight vector orthogonal decomposition, IC-WORD) to estimate the angle of multiple coherent targets. Through the verification of simulation, it is proved that IC-WORD has better performance than the traditional spatial smoothing algorithm. More specifically, IC-WORD can correct spectral peak shift, improve angle measurement accuracy, and still operate stably under the condition of multiple coherent targets. This paper also uses the measured data from one of the most advanced HFSWR stations in China to validate the algorithm, which makes the paper have strong practical significance. [ABSTRACT FROM AUTHOR]

Ground-based radar interferometry is capable of measuring target displacement to sub-mm accuracy. W-band ground-based radar has recently been investigated as a potential application for structural health monitoring. On the other hand, the application of W-band ground-based radar for natural slope monitoring is considered in this study due to its advantages in portability and recent cost-effective solutions. In radar interferometry, atmospheric phase screen (APS) is the most relevant phase disturbance that should be corrected for accurate displacement measurement. However, the APS effects in W-band radar interferometry have rarely been discussed. In this context, we study and evaluate the impacts of APS and its potential correction methods for 79 GHz ground-based radar interferometry using multiple-input and multiple-output (MIMO) radar. This paper presents an experimental investigation of a 79 GHz radar system using two types of field experiments conducted in an open flat field and a quarry site. In addition to the W-band radar system, a Ku-band (17 GHz) ground-based synthetic aperture radar (GB-SAR) system was jointly tested to compare different operating frequency bands. The result confirmed the accurate displacement estimation capability of the 79 GHz radar with an appropriate APS correction. [ABSTRACT FROM AUTHOR]

Simultaneously polarimetric radar (SPR) realizes the rapid measurement of a target's polarimetric scattering matrix by transmitting orthogonal radar waveforms of good ambiguity function (AF) properties and receiving their echoes via two orthogonal polarimetric channels at the same time, e.g., horizontal (H) and vertical (V) channels (antennas) sharing the same phase center. The orthogonality of the transmitted waveforms can be realized using low-correlated phase-coded sequences in the H and V channels. However, the Doppler tolerances of the waveforms composed by such coded sequences are usually quite low, and it is hard to meet the requirement of accurate measurement regarding moving targets. In this paper, a joint design approach for unimodular orthogonal complementary sequences along with the optimal receiving filter is proposed based on the majorization–minimization (MM) method via alternate iteration for obtaining simultaneously polarimetric waveforms (SPWs) of good orthogonality and of the desired AF. During design, the objective function used for minimizing the sum of the complementary integration sidelobe level (CISL) and the complementary integration isolation level (CIIL) is constructed under the mismatch constraint of signal-to-noise ratio (SNR) loss. Different SPW examples are given to show the superior performance of our design in comparison with other designs. Finally, practical experiments implemented with different SPWs are conducted to show our advantages more realistically. [ABSTRACT FROM AUTHOR]

Recently, the problem of target detection in noisy environments for the Dual-Functional Radar Communication (DFRC) integration system has been a hot topic. In this paper, to suppress the noise and further enhance the target detection performance, a novel manifold Riemannian Improved Armijo Search Conjugate Gradient algorithm (RIASCG) framework has been proposed which jointly optimizes the integrated transmitting waveform and receiving filter. Therein, the reference waveform is first designed to achieve excellent pattern matching of radar beamforming. Furthermore, to ensure the quality of system information transmission, the energy of multi-user interference (MUI) of communication signals is incorporated as the constraint. Additionally, the typical similarity constraint is introduced to ensure the transmitting waveform with a good ambiguity function. Finally, simulation results demonstrate that the designed waveform not only enhances the system's target detection performance in noisy environments but also achieves a relatively good multi-user communication ability when compared with other prevalent waveforms. [ABSTRACT FROM AUTHOR]

Ultra-wideband (UWB) multiple-input multiple-output (MIMO) through-wall radar is widely used in through-wall human target detection for its good penetration characteristics and resolution. However, in actual detection scenarios, weak target masking and adjacent target unresolving will occur in through-wall imaging due to factors such as resolution limitations and differences in human reflectance, which will reduce the probability of target detection. An improved U-Net model is proposed in this paper to improve the detection probability of through-wall targets. In the proposed detection method, a ResNet module and a squeeze-and-excitation (SE) module are integrated in the traditional U-Net model. The ResNet module can reduce the difficulty of feature learning and improve the accuracy of detection. The SE module allows the network to perform feature recalibration and learn to use global information to emphasize useful features selectively and suppress less useful features. The effectiveness of the proposed method is verified via simulations and experiments. Compared with the order statistics constant false alarm rate (OS-CFAR), the fully convolutional networks (FCN) and the traditional U-Net, the proposed method can detect through-wall weak targets and adjacent unresolving targets effectively. The detection precision of the through-wall target is improved, and the missed detection rate is minimized. [ABSTRACT FROM AUTHOR]

Low-altitude slow-moving small (LSS) targets are defined as flying at altitudes less than 1000 m with speeds less than 55 m/s and a radar crossing-section (RCS) less than 2 m 2 . The detection performance of ground-based radar using the LSS target detection technique can be significantly deteriorated by the diversity of LSS targets, background clutter, and the occurrence of false alarms caused by multipath interference. To address the LSS target detection problem, we have devised a novel two-dimensional electronic scanning active phased array radar system that is implemented in the software-defined radar architecture and propose a transmit beam control algorithm based on the low peak-to-average ratio (PAPR). Meanwhile, we devised a flexible arbitrary radar waveform generator to adapt to complex environmental situations. Field experiment results effectively demonstrate that our radar can be used to detect LSS targets. Moreover, an ablation experiment was conducted to verify the role played by transmit beam control and adaptive waveform optimization and generation in improving the system performance. [ABSTRACT FROM AUTHOR]

The problem of suppressing mainlobe deceptive jammers, which spoof radar systems by generating multiple false targets, has attracted widespread attention. To tackle this problem, in this paper, the multiple-input multiple-output (MIMO) radar system was utilized by applying a quadratic element phase code (QEPC) to the transmitted pulses of different elements. In the receiver, by utilizing the spatial frequency and Doppler frequency offset generated after decoding, the jammers were equivalently distributed in the sidelobes of the joint Doppler-transmit-receive domain and were distinguishable from the true target. Then, further spatial frequency compensation and Doppler compensation were performed to align the true target to the zero point in the transmit spatial and Doppler domains. Moreover, by designing appropriate coding coefficients, the jammers were suppressed by data-independent Doppler-transmit-receive three-dimensional beamforming. However, the beamforming performance was sensitive to angular estimation mismatches, resulting in performance degradation of jammer suppression. To this end, a center-boundary null-broadening control (CBNBC) approach was used to broaden the nulls in the equivalent beampattern by generating multiple artificial jammers with preset powers around the nulls. Thus, the false targets (FTs) with deviations were sufficiently suppressed in the broadened notches. Numerical simulations and theoretical analysis demonstrated the performance of the developed jammer suppression method. [ABSTRACT FROM AUTHOR]

Space-time adaptive processing (STAP) is an important method of clutter suppression that requires adequate training samples. For an airborne conformal array radar, conventional STAP methods do not have enough training samples to acquire good performance due to the range dependent clutter caused by geometry and the problem of polarization. Sparse-recovery-based STAP (SR-STAP) methods have garnered significant attention in the past few decades because they only require a small number of training samples. Sparse Bayesian Learning (SBL) methods have seen increasing amounts of development due to its robust, self-regularizing nature and because it is not sensitive to user parameters, but it converges slowly. In this paper, a novel fast SBL (NFSBL) method is put forward to increase the rate of convergence. To minimize the SBL penalty function, the proposed method introduces the conjugate function to construct a surrogate function. Additional solution sparsity will be achieved through iteratively minimizing the surrogate function. Then, from the proposed method, we could obtain a more accurate clutter plus noise covariance matrix. Numerical simulation results express that this method could acquire better performance of STAP and improvement in convergence and computational complexity for a conformal array. [ABSTRACT FROM AUTHOR]

This paper investigates the design of waveforms for multiple-input multiple-output (MIMO) radar systems that can exploit multipath returns to enhance target detection performance. By making reasonable use of multipath information in the waveform design, MIMO radar can effectively improve the signal-to-interference and noise ratio (SINR) of the receiver under a constant modulus (CM) constraint. However, optimizing the waveform design under these constraints is a challenging non-linear and non-convex problem that cannot be easily solved using traditional methods. To overcome this challenge, we proposed a novel waveform design method for MIMO radar in multipath scenarios based on deep learning. Specifically, we leveraged the powerful nonlinear fitting ability of neural networks to solve the non-convex optimization problem. First, we constructed a deep residual network and transform the CM constraint into a phase sequence optimization problem. Next, we used the constructed waveform optimization design problem as the loss function of the network. Finally, we used the adaptive moment estimation (Adam) optimizer to train the network. Simulation results demonstrated that our proposed method outperformed existing methods by achieving better SINR values for the receiver. [ABSTRACT FROM AUTHOR]

A joint radar-communication (JRC) system utilizes the integrated transmit waveform and a single platform to perform radar and communication functions simultaneously. Admittedly, the multibeam waveform design approach could transmit the assigned waveforms in different beams with the aid of spatial and temporal degrees of freedom. However, a high sidelobe level (SLL) in the beampattern reduces energy efficiency and expands exposure probability. In this study, we propose a novel spatial–temporal joint waveform design method based on the beamforming algorithm to form a low SLL beampattern. Waveform synthesis constraints are considered to synthesize desired radar and communication waveforms at designated directions. Furthermore, we impose the constant modulus constraint to lessen the impact of the high peak-to-average ratio (PAPR). The optimization process of the whole model can be summarized as two stages. First, the covariance matrix is created by convex optimization with respect to the minimum SLL. Second, the integrated transmit waveform is tuned through an alternating projection algorithm. Based on the simulation findings, we demonstrate that the proposed method outperforms the traditional methods in terms of low SLL and waveform synthesis. Meanwhile, we validate the effectiveness of the proposed method using semi-physical experiment results. [ABSTRACT FROM AUTHOR]

This paper describes a coherent multi-dwell processing (CMDP) method for high velocity estimation and super-resolution in search and track, while search (TWS) radar modes use an un-conventional signal processing algorithm that exploits multi-dwell transmissions. The existence of the multi-dwell waveform is necessary for visibility needs by un-folding the target's velocity and range ambiguity and is proposed to be utilized for high velocity estimation and super-resolution. In this paper, the proposed scheme is shown to result in improved velocity estimation and doppler resolution performance for un-ambiguous targets in comparison to classical radar processing. The processing concept uses the same transmitted waveform (WF) and time duration without the need to increase the time on target (TOT) through sophisticated coherent concatenation of the received dwells with velocity compensation between the dwells. The phase compensation in receive mode is implemented for each target according to its characteristics, which means that target velocities are estimated in each dwell separately. The notable result of the CMDP is the linear doppler resolution improvement obtained with the given search resources and without knowing the target characteristics in advance or the dwell delay time. Other possible benefits of this process are the ability to achieve larger detection ranges and high-angle measurement precisions in search mode due to the higher signal-to-noise ratio (SNR) of the extended dwell and the ability to track more targets due to efficient time and resource management. An outstanding opportunity to exploit the CMDP is by combining missions in phased array (PA) radars, meeting the multi-objective needs of both high spatial scan rates for illuminating the target and high doppler estimation and resolution performance. [ABSTRACT FROM AUTHOR]

The joint radar and communications (JRC) waveform often has a high range sidelobe, which will degrade the target detection performance of an automotive JRC system. To solve this problem, a joint radar and communications complementary waveform group (JRC-CWG) design method is proposed in this paper by exploiting the philosophy of the complementary sequence. In the JRC-CWG, the traditional unimodular communications waveforms, such as the binary phase shift keying (BPSK) waveform, are used to perform the communications function. The sum of the autocorrelation function (SACF) of JRC-CWG is optimized to minimize the sidelobe level. Furthermore, considering that the JRC-CWG has poor Doppler resilience, a Doppler-resilient joint radar and communications complementary waveform (DR-JRC-CWG) design method is proposed to improve the Doppler resilience. Finally, the simulation results show that the proposed JRC-CWG and DR-JRC-CWG have superior radar performances without the degradation in communications performance in terms of the bit error rate (BER). [ABSTRACT FROM AUTHOR]

In this paper, we study the multiple-input multiple-output (MIMO) radar transmit waveform design method for beampattern matching. The purpose is to design the beampattern to approximate the actual one and minimize the cross-correlation sidelobes under the constant modulus constraint (CMC). Due to the CMC, the problem is non-convex, and the existing methods solve it with relaxation, resulting in performance degradation. Different from these methods, we notice that the CMC is the product of complex circles (CC). Based on this physical characteristic, the direct beampattern matching without relaxation (DBMWR) method is proposed. To be specific, we first formulate the original problem as an unconstrained quartic problem over the CC and then solve it by the proposed method without relaxation. Simulation results show that the proposed method can achieve a balance in terms of accuracy and computation complexity compared with other methods. [ABSTRACT FROM AUTHOR]

Multiple-input multiple-output (MIMO) radar uses waveform diversity technology to form a virtual aperture to improve the azimuth resolution of forward-looking imaging. However, the super-resolution imaging capability of MIMO radar is limited, and the resolution can only be doubled compared with the real aperture. In the radar forward-looking image, compared with the whole imaging scene, the target only occupies a small part. This sparsity of the target distribution provides the feasibility of applying the compressed sensing (CS) method to MIMO radar to further improve the forward-looking imaging resolution. At the same time, the forward-looking imaging method for a MIMO radar based on CS has the ability to perform single snapshot imaging, which avoids the problem of a motion supplement. However, the strong noise in the radar echo poses a challenge to the imaging method based on CS. Inspired by the low-rank properties of the received radar echoes and the generated images, and considering the existing information about sparse target distribution, a forward-looking super-resolution imaging model of a MIMO radar that combines sparse and double low-rank constraints is established to overcome strong noise and achieve robust forward-looking super-resolution imaging. In order to solve the multiple optimization problem, a forward-looking image reconstruction method based on the augmented Lagrangian multiplier (ALM) is proposed within the framework of the alternating direction multiplier method (ADMM). Finally, the results of the simulation and the measurement data show that the proposed method is quite effective at improving the azimuth resolution and robustness of forward-looking radar imaging compared with other existing methods. [ABSTRACT FROM AUTHOR]

In recent years, sparse direction-of-arrival (DOA) estimation for multiple-input multiple-output (MIMO) radar has attracted extensive attention and been extensively studied, especially the method based on the classic least absolute shrinkage and selection operator (LASSO) estimator. The alternating-direction method of multipliers (ADMM) is an effective method for solving this problem at the cost of introducing an additional user parameter. To avoid introducing an additional user parameter, this paper adopts an equivalent transformation in the form of the generalized SParse Iterative Covariance-based Estimation (qSPICE) cost function to obtain a mean squared minimized form of the cost function. Then, the problem is transformed into a sparse optimization problem in the form of a weighted LASSO. Next, this unconstrained optimization problem is decomposed into three subproblems, which are solved separately to reduce the dimension of each problem and thus reduce the overall computational complexity based on ADMM. Simulation results and measured data indicate that the proposed method significantly outperforms the traditional super-resolution DOA estimation method and ADMM-LASSO method and slightly outperforms qSPICE in terms of resolution and sidelobe suppression capability. In addition, the proposed method has a much lower computational complexity and substantially fewer iterations than qSPICE. [ABSTRACT FROM AUTHOR]

Frequency modulated continuous wave (FMCW) multiple-input multiple-output (MIMO) radars are widely applied in target localization. However, during the process, the estimation accuracy decreases sharply without considerable signal-to-noise ratio (SNR) and sufficient snapshot number. It is therefore necessary to consider estimation schemes that are valid under low signal-to-noise ratio (SNR) and snapshot. In this paper, a fast target localization framework based on multiple deep neural networks named Multi-DeepNet is proposed. In the scheme, multiple interoperating deep networks are employed to achieve accurate target localization in harsh environments. Firstly, we designed a coarse estimate using deep learning to determine the interval where the angle is located. Then, multiple neural networks are designed to realize accurate estimation. After that, the range estimation is determined. Finally, angles and ranges are matched by comparing the Frobenius norm. Simulations and experiments are conducted to verify the efficiency and accuracy of the proposed framework. [ABSTRACT FROM AUTHOR]

The detection of low, slow and small (LSS) targets, such as small drones, is a developing area of research in radar, wherein the presence of ground clutter can be quite challenging. LSS targets, because of their unusual flying mode, can be easily shadowed by ground clutter, leading to poor radar detection performance. In this study, we investigated the feasibility and performance of a ground clutter mitigation method combining slow-time multiple-input multiple-output (st-MIMO) waveforms and independent component analysis (ICA) in a ground-based MIMO radar focusing on LSS target detection. The modeling of ground clutter under the framework of st-MIMO was first defined. Combining the spatial and temporal steering vector of st-MIMO, a universal signal model including the target, ground clutter, and noise was established. The compliance of the signal model for conducting ICA to separate the target was analyzed. Based on this, a st-MIMO-ICA processing scheme was proposed to mitigate ground clutter. The effectiveness of the proposed method was verified with simulation and experimental data collected from an S-band st-MIMO radar system with a desirable target output signal-to-clutter-plus-noise ratio (SCNR). This work can shed light on the use of ground clutter mitigation techniques for MIMO radar to tackle LSS targets. [ABSTRACT FROM AUTHOR]

In this paper, the problem of mainlobe deceptive jammer suppression is solved with the frequency diversity array-multiple-input multiple-output (FDA-MIMO) radar system. At the modeling stage, based on the FDA-MIMO radar, a quadratic phase code (QPC) is applied along the slow time dimension in the transmit array. In the receiver, after decoding and principal range compensation, the true and false targets that are generated in an identical angle, can be discriminated in the joint transmit-receive-Doppler frequency domain. Particularly, the false targets are equivalently moved from the mainlobe to the sidelobes in the transmit spatial frequency domain. Then, by performing the data-dependent transmit-receive-Doppler three-dimensional beamforming, the false targets are suppressed owing to Doppler and range mismatches. Moreover, by moving the jammers to nulls in the Doppler frequency domain, the capability in terms of the maximum number of suppressible jammers can be strengthened with an appropriate coding coefficient and frequency increment. Numerical results can certify the suppression capability of the QPC-FDA-MIMO radar. [ABSTRACT FROM AUTHOR]

The ground and sea clutter received by space-based early warning radar (SBEWR) has severely range ambiguous characteristics due to its platform location, and the non-stationary factor caused by Earth's rotation makes the received clutter at different range ambiguous positions seriously broaden in the Doppler dimension. The complex clutter suppression performance of SBEWR obtained by traditional method is degraded significantly. To solve this problem and achieve better clutter suppression performance, a novel multi-domain adaptive processing method for clutter suppression is proposed in this paper. The proposed method introduced a range related signal processing domain based on conventional space–time domain by using frequency diverse array phase multiple-input multiple-output (FDA-Phase-MIMO) radar. In addition, a novel multi-domain joint dimensionality reduction structure was designed. The novel multi-domain joint adaptive processing using the proposed dimensionality reduction structure could not only obtain great clutter suppression performance of SBEWR, but also minimize the requirement of the number of selected auxiliary channels. Simulation examples show the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

With the development of intelligent transportation, radar and communication on moving platforms are competing for the spectrum. In this paper, we propose and demonstrate a new algorithmic framework for radar-communication spectral coexistence system on moving platform with mutual interference suppression, in which communication rate and the radar signal-to-interference-plus-noise ratio (SINR) are simultaneously optimized, under the energy constraints for the two systems and the radar constant modulus constraint. The radar spatial-temporal filter at the receiver and transmitting waveform are optimized, while the codebook matrix is optimized for the communication system. To cope with the established non-convex problem with triplet variables, we decouple the original problem into multiple subproblems, for which an alternating algorithm based on iterative procedures is derived with lower computational complexity. Specifically, the subproblems of communication codebook and radar filter design are convex and the closed-form solutions can be easily obtained, while the radar waveform optimization is non-convex. Then we propose a novel scheme by exploiting the alternating direction method of multipliers (ADMM) based on minorization-maximization (MM) framework. Finally, to reveal the effectiveness of the proposed algorithm in different scenarios, numerical results are provided. [ABSTRACT FROM AUTHOR]

Integrated radar and communications (IRC) technology has become very important for civil and military applications in recent years, and IRC waveform design is a major challenge for IRC development. In this paper, we focus on the IRC waveform design based on the multi-symbol orthogonal frequency division multiplexing (OFDM) technique. In view of the defects resulting from high peak-to-mean envelope power ratios (PMEPRs) and high range sidelobes in IRC systems, an intelligent and effective IRC waveform design method jointly optimized with the PMEPR and peak-to-sidelobe ratio (PSLR) is proposed. Firstly, a flexible tone reservation (TR)-based IRC waveform structure is applied in both temporal and frequency domains, i.e., multi-symbol OFDM waveform. Secondly, the optimization problem considering PMEPR and PSLR and extending them to the L p -norm form is reformulated. Then, the conjugate gradient of the objective function is analytically derived and the conjugate gradient algorithm (CGA) is presented to simultaneously improve the PMEPR and PSLR. Finally, the simulation results show that the proposed algorithm can efficiently generate IRC waveforms with an excellent PMEPR, PSLR, radar signal-to-noise ratio (SNR), and bit error rate (BER) performance. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) imaging is starting to play an essential role in the automotive industry. Its day and night sensing capability, fine resolution, and high flexibility are key aspects making SAR a very compelling instrument in this field. This paper describes and compares three algorithms used to combine low-resolution images acquired by a Multiple-Input Multiple-Output (MIMO) automotive radar to form an SAR image of the environment. The first is the well-known Fast Factorized Back-Projection (FFBP), which focuses the image in different stages. The second one will be called 3D2D, and it is a simple 3D interpolation used to extract the SAR image from the Range-Angle-Velocity (RAV) data cube. The third will be called Quick&Dirty (Q&D), and it is a fast alternative to the 3D2D scheme that exploits the same intuition. A rigorous mathematical description of each algorithm is derived, and their limits are addressed. We then provide simulated results assessing different interpolation kernels, proving which one performs better. A rough estimation of the number of operations proves that both algorithms can be deployed using a real-time implementation. Finally, we will present some experimental results based on open road campaign data acquired using an eight-channel MIMO radar at 77 GHz, considering the case of a forward-looking geometry. [ABSTRACT FROM AUTHOR]

Noise radar has become attractive owing to progress in hardware technology. Aside from the low probability of exploitation, the use of noise waveform is likely to grow due to its low interference features, especially in circumstances where multiple radars operate in the same band. In this study, we developed and tested a wideband noise radar for a ground-moving vehicle. It operates in the X-band with an instantaneous bandwidth of 1.5 GHz. The true time delay (TTD) was applied to correct the distortion of the beam pattern by the wide bandwidth, and the correlators were implemented by high-speed parallel processing using a field programmable gate array (FPGA). The outdoor experimental results were presented. [ABSTRACT FROM AUTHOR]

Target localization is a fundamental problem in array signal processing. The problem of locating near-field targets with multiple-input multiple-output (MIMO) radar has been studied extensively; however, most of the conventional matrix-based approaches suffer from limitations in terms of the representation and exploitation of the multidimensional nature of MIMO radar signals. In this paper, we addressed the problem of localizing multiple targets in the near-field region, aiming at pursuing a solution applicable for multidimensional signal that is able to achieve sufficient accuracy. A tensor-based signal model impinging on a monostatic frequency diverse array multiple-input multiple-output (FDA-MIMO) radar was formulated, and a corresponding tensor decomposition-based localization algorithm (TenDLA) that showcases the connection between the tensor-based analysis and the localization problem was developed. Additionally, a correction procedure to mitigate the estimation deviations on the range and angle was presented, yielding significant improvements in estimation accuracy. Numerical examples demonstrated the validity and effectiveness of the proposed approach, and it was shown that this approach is superior to conventional methods due to its high-resolution estimation accuracy as well as its relatively low computational costs. [ABSTRACT FROM AUTHOR]

As an emerging technique for detection, electromagnetic vector sensor multiple-input multiple-output (EVS-MIMO) radar has attracted extensive interest recently. This paper focuses on the coherent targets issue in EVS-MIMO radar, and a spatial smoothing estimator is developed to estimate the multiple parameters. It first recovers the rank of the array data via forward spatial smoothing. Then, it estimates the elevation angles via the rotational invariance technique. Combined with the vector cross-product method, the azimuth angles are obtained. Thereafter, with the previously achieved direction angles, the polarized parameters are acquired by using the least squares technique. Unlike the existing polarization smoothing techniques, the proposed estimator is able to estimate the two-dimensional direction parameter. Furthermore, it can provide a polarized parameter of the target. In addition, the proposed estimator is computationally efficient, since it offers closed-form and automatically paired solutions to all the parameters. Numerical experiments are carried out to show its superiority and effectiveness. [ABSTRACT FROM AUTHOR]

There are many unavoidable array errors in practical scenarios, which would drastically increase the sidelobe level (SLL) and distort the performance of radar systems accordingly. In this paper, an effective beampattern synthesis approach is proposed to realize a low peak sidelobe level (PSLL) and wide-nulling in the presence of array errors, thus improving the consequent performance of the radar. In particular, the covariance matrix of the sidelobe region (CMSR) is incorporated into the optimization. Considering the randomness of array errors, the statistical mean method is adopted to obtain a more accurate calculation of the CMSR in the presence of array errors based on a Monte Carlo trial. To efficiently and effectively solve the optimization problem, an advanced metaheuristic algorithm, i.e., the water cycle algorithm (WCA), is adopted when seeking the corresponding optimal weight vectors. Numerical results are provided and discussed to demonstrate the effectiveness of the proposed approach including the results based on a wideband linearly spaced magneto-electric (ME) dipole array. [ABSTRACT FROM AUTHOR]

In modern electronic warfare, cognitive radar with knowledge-aided waveforms would show significant flexibility in anti-interference. In this paper, a novel method, named particle swarm-assisted projection optimization (PSAP), is introduced to design phase-coded waveforms with multi-level low range sidelobes, which mainly considers the stability for randomized initialization under the unimodular constraint. Firstly, the mathematical problem corresponding to avoid the range sidelobe masking from multiple non-cooperative targets or interference is formulated by giving different threat levels. Then, based on the alternating direction decomposition idea, the original problem is divided into triple-variable ones where these non-linear approximations can be solved via alternating projections along with FFT. Furthermore, the PSAP method with swarm intelligence, learning factor, and particle-assisted projection could ensure the optimization convergence in a parallel way, which could relax the non-convex constraint and enhance the global exploiting performance. Finally, simulations for several typical scenarios and numerical results are all provided to assess the waveforms generated by PSAP and other prevalent ones. [ABSTRACT FROM AUTHOR]

This paper establishes a hybrid distributed phased array multiple-input multiple-output (PA-MIMO) radar system model to improve the target detection performance by combining coherent processing gain and spatial diversity gain. First, the radar system signal model and array space configuration model for the PA-MIMO radar are established. Then, a novel likelihood ratio test (LRT) detector is derived based on the Neyman–Pearson (NP) criterion in a fixed noise background. It can jointly optimize the coherent processing gain and spatial diversity gain of the system by implementing subarray level and array element level optimal configuration at both receiver and transmitter ends in a uniform blocking manner. On this basis, three typical optimization problems are discussed from three aspects, i.e., the detection probability, the effective radar range, and the radar system equipment volume. The approximate closed-form solutions of them are constructed and solved by the proposed quantum particle swarm optimization-based stochastic rounding (SR-QPSO) algorithm. Through the simulations, it is verified that the proposed optimal configuration of the hybrid distributed PA-MIMO radar system offers substantial improvements compared to the other typical radar systems, detection probability of 0.98, and an effective range of 1166.3 km, which significantly improves the detection performance. [ABSTRACT FROM AUTHOR]

In this paper, we discuss the possibility of generating high-resolution mapping of urban (or extra-urban) environments by the application of synthetic aperture radar (SAR) processing concepts to the data collected by mm-wave automotive radars installed on-board commercial vehicles. The study is motivated by the fact that radar sensors are becoming an indispensable component of the equipment of modern vehicles, being characterized by low cost, good performance, and affordable processing; therefore, in the future, nearly every single vehicle could be potentially equipped with radar devices capable of high-resolution imaging, enabled by application of SAR processing methodologies. Throughout this paper, we aim to discuss the role of SAR imaging in the automotive context under a theoretical and experimental perspective. First, we present the resulting benefits in terms of angular resolution and signal-to-noise ratio. Then, we discuss relevant technological aspects, such as suppression of angular ambiguities, fine estimation of platform motion, and SAR processing architectures, and we present a preliminary evaluation of the required computational costs. Finally, we will present a number of experimental results based on open road campaign data acquired using an 8-channel MIMO radar at 77 GHz, considering the cases of side-looking SAR, forward SAR, and SAR imaging of moving targets. [ABSTRACT FROM AUTHOR]

This paper studies the joint range and angle estimation of monostatic frequency diverse array multiple-input multiple-output (FDA-MIMO) radar and proposes a joint estimation algorithm. First, the transmit direction matrix is converted into real values by unitary transformation, and the Vandermonde-like matrix structure is used to construct an augmented output that doubles the aperture of the receive array. Then the augmented output is combined into a third-order tensor. Next, the factor matrices are initially estimated. Finally, the direction matrices are estimated utilizing parallel factor (PARAFAC) decomposition, and the range and angle are calculated by employing least square fitting. As contrasted with the classic PARAFAC method, the proposed method can estimate more targets and provide better estimation performance, and requires less computational complexity. The availability and excellence of the proposed method are reflected by numerical simulations and complexity analysis. [ABSTRACT FROM AUTHOR]

Aiming at maximizing waveform diversity gain when designing a phase-coded multiple-input multiple-output (MIMO) radar waveform set, it is desirable that all waveforms are orthogonal to each other. Hence, the lowest possible peak cross-correlation ratio (PCCR) is expected. Meanwhile, low peak auto-correlation side-lobe ratio (PASR) is needed for good detection performance. However, it is difficult to obtain a closed form solution to the waveform set from the expected values of the PASR and PCCR. In this paper, the waveform set design problem is modeled as a multi-objective, NP-hard constrained optimization problem. Unlike conventional approaches that design the waveform set through optimizing a weighted sum objective function, the proposed optimization model evaluates the performance of multi-objective functions based on Pareto level and obtains a set of Pareto non-dominated solutions. That means that the MIMO radar system can trade off each objective function for different requirements. To solve this problem, this paper presents a multi-objective quantum genetic algorithm (MoQGA) based on the framework of quantum genetic algorithm. A new population update strategy for the MoQGA is designed based on the proposed model. Compared to the state-of-the-art methods, like BiST and Multi-CAN, the PASR and PCCR metrics of the waveform set are 0.95–3.91 dB lower with the parameters of the numerical simulation. The MoQGA is able to minimize PASR and PCCR of the MIMO radar waveform set simultaneously. [ABSTRACT FROM AUTHOR]

Prior studies have highlighted the importance of calibrating receiver antennas in target direction-of-arrival (DOA) estimation and surface current measurement for high-frequency (HF) radar systems. It is worth noting that the calibration contributes to the performance of both shore-based HF radar and platform-mounted HF radar. Compared with shore-based HF radar, the influence of six-degrees-of-freedom (six-DOF) platform motion should be considered in the calibration of platform-mounted HF radar. This paper initially describes a calibration scheme that receives phased-array antennas for an anchored platform-mounted HF radar incorporating a model of free rotation, which is called yaw rotation and dominates the six-DOF platform motion in this study. In the presence of yaw rotation, the amplitude and phase of the source calibration signal from the other shore-based radar sites reveal the directional sensitivity of the receiver phased-array antennas. The calibration of receiver phased-array antennas is composed of channel calibration (linking cables and receiver hardware calibration) and antenna pattern calibration. The antenna pattern at each bearing can be represented by the Fourier series. The estimation of channel calibration and antenna pattern calibration depends on an overdetermined HF radar system consisting of observed values and theoretical constraints, so the least-squares fits of the channel calibration coefficients and antenna pattern calibration coefficients are obtained. The experimental results show that the target DOA estimation and surface current measurement can be improved if the phased-array platform-mounted HF radar system is calibrated. [ABSTRACT FROM AUTHOR]

The least absolute shrinkage and selection operator (LASSO) algorithm is a promising method for sparse source location in time–division multiplexing (TDM) multiple–input, multiple–output (MIMO) radar systems, with notable performance gains in regard to resolution enhancement and side lobe suppression. However, the current batch LASSO algorithm suffers from high–computational complexity when dealing with massive TDM–MIMO observations, due to high–dimensional matrix operations and the large number of iterations. In this paper, an online LASSO method is proposed for efficient direction–of–arrival (DOA) estimation of the TDM–MIMO radar based on the receiving features of the sub–aperture data blocks. This method recursively refines the location parameters for each receive (RX) block observation that becomes available sequentially in time. Compared with the conventional batch LASSO method, the proposed online DOA method makes full use of the TDM–MIMO reception time to improve the real–time performance. Additionally, it allows for much less iterations, avoiding high–dimensional matrix operations, allowing the computational complexity to be reduced from O K 3 to O K 2 . Simulated and real–data results demonstrate the superiority and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Interferometric radar is a hot research topic in manmade target displacement measuring applications, as it features high precision, a large operation range, and a remote multiple point measuring ability. Most one-dimensional interferometric radars use single-input single-output (SISO) radar architecture to achieve a high repetition measuring rate of more than 200 Hz; however, it cannot resolve multiple targets with the same radial range but different azimuth angles. This paper presents a multiple-input multiple-output (MIMO) radar that adopts a limited number of antennas (usually tens) to simultaneously improve azimuth resolution and achieve a high repetition measuring rate. A MUSICAPES algorithm is proposed, which is cascades the multiple signal classification (MUSIC) algorithm and the amplitude and phase estimation (APES) filter. The MUSIC algorithm is used to further improve the angular resolution of the small array. The APES is used to precisely recover the phases of the multiple close targets by suppressing their mutual interferences. Simulations and experiments with a millimeter-wave radar validate the performance of the proposed method. [ABSTRACT FROM AUTHOR]

Range-ambiguous clutter is an inevitable issue for airborne forward-looking array radars, especially with the high pulse repetition frequency (PRF). In this paper, a method to suppress the range-ambiguous clutter is proposed in an FDA-MIMO radar with a forward-looking planar array. Compressed sensing FDA technology is used to suppress the range-ambiguous clutter and the forward-looking non-uniformity short-range clutter of radar. Specifically, first, the range ambiguous clutter in different regions is separated by the characteristics of the planar array radar elevation dimension and FDA radar range coupling. Meanwhile, regarding the issue of the FDA radar main lobe moving between coherent pulses, a main lobe correction (MLC) algorithm proposes a solution for the issue, where the FDA radar cannot coherently accumulate signals in the case of non-full angle illumination. Finally, compressed sensing technology and elevation dimension filtering are utilized to suppress the range ambiguous clutter at the receiver, with the approach alleviating the range dependence of clutter in the observation region. A small number of clutter snapshots can obtain an approximately ideal clutter covariance matrix through compressed sensing sparse recovery. The method not only reduces the number of training samples, but also overcomes the problem of clutter non-uniformity in the forward-looking array. Therefore, the clutter suppression problems faced by the high repetition frequency airborne radar forward-looking array structure are solved. At the analysis stage, a comparison among the conventional MIMO and FDA methods is carried on by analyzing the improvement factor (IF) curves. Numerical results verify the effectiveness of the proposed method in range-ambiguous clutter suppression. [ABSTRACT FROM AUTHOR]

This paper discusses the issue of low-angle estimation in multiple-input, multiple-output (MIMO) radar. Due to the low amount of data transmission, storage, and computation required for beamspace super-resolution algorithms in low-angle estimation, the method has gained considerable interest in recent years. This paper develops a beamspace scene classification (BSC) algorithm to enhance the performance of low-angle estimation in MIMO radar. The proposed BSC algorithm solves an initial angle estimate and the multipath coefficient estimate using the 3D beamspace data, and further constructs the beamspace data required for transmitting and receiving sides to reduce the data dimensions. It is additionally used to provide three estimation schemes with closed-form solutions for three multipath scenes (obtaining two estimations for transmitting and receiving sides). Finally, it fuses the estimates of the two sides by the minimum variance criterion. As a result, the proposed method achieves high estimation accuracy while requiring few processing resources. Moreover, the computational complexity of the proposed algorithm is examined in this study, with the results demonstrating that the proposed method is superior for engineering applications. [ABSTRACT FROM AUTHOR]