Search

ObjectivesRecently, the results of two economic evaluations were published both of which seemingly demonstrate the cost-effectiveness of sofosbuvir-based regimens for the treatment of chronic hepatitis C genotype 1 infection in Germany. Both analyses were sponsored by the manufacturer of sofosbuvir and use a different methodology: Whereas one evaluation is based on a conventional cost-utility analysis, the other rests upon the efficiency-frontier method used by the German Institute for Quality and Efficiency in Health Care (IQWiG). The purpose of this study is to reanalysis the results of both economic evaluations in combination.DesignReanalysis of published decision modelling results.SettingPrimary care in Germany.ParticipantsPatients with chronic hepatitis C genotype 1 infection (treatment-naïve and -experienced, cirrhotic and non-cirrhotic).InterventionsSofosbuvir, other anti-hepatitis C virus drugs, and no treatment.Primary and secondary outcome measuresCost per unit of health benefit and cost per quality-adjusted life year.ResultsReanalysis of the results of both economic evaluations in combination reveals an unclear rationale for choosing the selected cost-effectiveness methods as well as a potential publication bias, favoring the product of the manufacturer. Based on the reanalysis, sofosbuvir is not cost-effective in treatment-experienced non-cirrhotic patients, potentially lacks cost-effectiveness in treatment-experienced cirrhotic patients, and is only partially cost-effective in treatment-naïve non-cirrhotic patients. Taken together, these results indicate a lack of cost-effectiveness in three quarters of the German patient population.ConclusionsTwo economic evaluations on sofosbuvir suggest, in combination, that sofosbuvir cannot be considered a cost-effective treatment in three quarters of the German patient population.

In our planned study, we shall empirically study the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether citation decisions are (mainly) driven by the quality of cited references. The design of our study is oriented towards the study by Teplitskiy, Duede [10]. We shall undertake a survey of corresponding authors with an available email address in the Web of Science database. The authors are asked to assess the quality of papers that they cited in previous papers. Some authors will be assigned to three treatment groups that receive further information alongside the cited paper: citation information, information on the publishing journal (journal impact factor), or a numerical access code to enter the survey. The control group will not receive any further numerical information. In the statistical analyses, we estimate how (strongly) the quality assessments of the cited papers are adjusted by the respondents to the anchor value (citation, journal, or access code). Thus, we are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation or journal), but also by numbers that are not related to quality, i.e. the access code. The results of the study may have important implications for quality assessments of papers by researchers and the role of numbers, citations, and journal metrics in assessment processes.

Early industrialization and the development of cheap production processes for paper have led to an exponential accumulation of paper-based documents during the last two centuries. Archives and libraries harbor vast amounts of ancient and modern documents and have to undertake extensive endeavors to protect them from abiotic and biotic deterioration. While services for mechanical preservation such as ex post de-acidification of historic documents are already commercially available, the possibilities for long-term protection of paper-based documents against fungal attack (apart from temperature and humidity control) are very limited. Novel processes for mechanical enhancement of damaged cellulosic documents use Ionic Liquids (IL) as essential process components. With some of these ILs having azole-functionalities similar to well-known fungicides such as Clotrimazole, the possibility of antifungal activities of these ILs was proposed but has not yet been experimentally confirmed.We evaluated the potency of four ILs with potential application in paper restoration for suppression of fungal growth on five relevant paper-infesting molds. The results revealed a general antifungal activity of all ILs, which increased with the size of the non-polar group. Physiological experiments and ultimate elemental analysis allowed to determine the minimal inhibitory concentration of each IL as well as the residual IL concentration in process-treated paper. These results provide valuable guidelines for IL-applications in paper restoration processes with antifungal activity as an added benefit. With azoles remaining in the paper after the process, simultaneous repair and biotic protection in treated documents could be facilitated.

PurposeThe aim of this experimental study was to investigate whether paper-and-pencil and computerized surveys administered in the school setting yield equivalent data quality indicators and risk behavior prevalence estimates.MethodsData were drawn from the European School Survey Project on Alcohol and Other Drugs (ESPAD®) carried out in Italy to monitor drug, alcohol, tobacco use and other risk-behaviors among Italian high school students aged 15-19 years. A sub-sample of schools was recruited for the study (1673 pupils). For each school, two entire randomly selected courses (from the first to the fifth grade) participated and were assigned randomly to the self-administered paper-and-pencil (N = 811) or computerized survey (N = 862). Differences in data quality were assessed using the following indicators: questionnaire completeness (missing gender and/or 50% of missing answers) and internal consistency (repetitive extreme response patterns). Separate logistic regression models were used to estimate the mode effect on the reporting of each risk behavior, controlling for gender and age. Finally, the prevalence estimates of the experimental study were compared to the results of the national ESPAD® study.ResultsThe computerized administration mode produced a higher proportion of invalid questionnaires, but the prevalence estimates generated from responses to the paper-and-pencil and computerized surveys were generally equivalent. Nevertheless, comparing these results with those of the national ESPAD® study, some differences in the prevalence rates were found.ConclusionsThe findings suggest that in a proctored school setting, the computerized survey mode yields almost the same results as the paper-and-pencil mode. However, because of the reliance on existing informatics facilities until when all schools in the country will be sufficiently equipped for the computerized data collection, they should be given the opportunity to choose between paper-and-pencil and computerized survey modes, in order to avoid a possible selection bias.

Raman spectroscopy has proven to be an indispensable technique for the identification of various types of analytes due to the fingerprint vibration spectrum obtained. Paper microfluidics has also emerged as a low cost, easy to fabricate and portable approach for point of care testing. However, due to inherent background fluorescence, combining Raman spectroscopy with paper microfluidics is to date an unmet challenge in the absence of using surface enhanced mechanisms. We describe the first use of wavelength modulated Raman spectroscopy (WMRS) for analysis on a paper microfluidics platform. This study demonstrates the ability to suppress the background fluorescence of the paper using WMRS and the subsequent implementation of this technique for pharmaceutical analysis. The results of this study demonstrate that it is possible to discriminate between both paracetamol and ibuprofen, whilst, also being able to detect the presence of each analyte quantitatively at nanomolar concentrations. Publisher PDF

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of 'superfolder' green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 mug/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens.

BackgroundThe psychometric properties of an online test are not necessarily identical to its paper and pencil original. The aim of this study is to test whether the factor structure of the Community Assessment of Psychic Experiences (CAPE) is measurement invariant with respect to online vs. paper and pencil assessment.MethodThe factor structure of CAPE items assessed by paper and pencil (N = 796) was compared with the factor structure of CAPE items assessed by the Internet (N = 21,590) using formal tests for Measurement Invariance (MI). The effect size was calculated by estimating the Signed Item Difference in the Sample (SIDS) index and the Signed Test Difference in the Sample (STDS) for a hypothetical subject who scores 2 standard deviations above average on the latent dimensions.ResultsThe more restricted Metric Invariance model showed a significantly worse fit compared to the less restricted Configural Invariance model (χ(2)(23) = 152.75, pConclusionsOur findings did not support measurement invariance with respect to assessment method. Because of the small effect sizes, the measurement differences between the online assessed CAPE and its paper and pencil original can be neglected without major consequences for research purposes. However, a person with a high vulnerability for psychotic symptoms would score 4.80 points lower on the total scale if the CAPE is assessed online compared to paper and pencil assessment. Therefore, for clinical purposes, one should be cautious with online assessment of the CAPE.

The distinction between worker and reproductive castes of social insects is receiving increased attention from a developmental rather than adaptive perspective. In the wasp genus Polistes, colonies are founded by one or more females, and the female offspring that emerge in that colony are either non-reproducing workers or future reproductives of the following generation (gynes). A growing number of studies now indicate that workers emerge with activated reproductive physiology, whereas the future reproductive gynes do not. Low nourishment levels for larvae during the worker-rearing phase of the colony cycle and higher nourishment levels for larvae when gynes are reared are now strongly suspected of playing a major role in this difference. Here, we present the results of a laboratory rearing experiment in which Polistes metricus single foundresses were held in environmental conditions with a higher level of control than in any previously published study, and the amount of protein nourishment made available to feed larvae was the only input variable. Three experimental feeding treatments were tested: restricted, unrestricted, and hand-supplemented. Analysis of multiple response variables shows that wasps reared on restricted protein nourishment, which would be the case for wasps reared in field conditions that subsequently become workers, tend toward trait values that characterize active reproductive physiology. Wasps reared on unrestricted and hand-supplemented protein, which replicates higher feeding levels for larvae in field conditions that subsequently become gynes, tend toward trait values that characterize inactive reproductive physiology. Although the experiment was not designed to test for worker behavior per se, our results further implicate activated reproductive physiology as a developmental response to low larval nourishment as a fundamental aspect of worker behavior in Polistes.

BackgroundMost research manuscripts are not accepted for publication on first submission. A major part of the resubmission process is reformatting to another journal's specific requirements, a process separate from revising the scientific content. There has been little research to understand the magnitude of the burden imposed by the current resubmission process.MethodsWe analyzed original research article submission requirements from twelve randomly selected journals in each of eight scientific and clinical focus areas from the InCites Journal Citation Reports database. From the 96 journals selected, we randomly identified three recently published manuscripts and sent surveys to those first and/or corresponding authors (288 total) to solicit information on time spent reformatting resubmissions and opinions on the process.FindingsThere was significant variation in manuscript submission requirements for journals within the same scientific focus and only 4% of journals offered a fully format-free initial submission. Of 203 authors responding (71.5% response rate), only 11.8% expressed satisfaction with the resubmission process and 91% desired reforming the current system. Time spent on reformatting delays most publications by at least two weeks and by over three months in about 20% of manuscripts. The effort to comply with submission requirements has significant global economic burden, estimated at over $1.1 billion dollars annually when accounting for a research team's time.InterpretationWe demonstrate that there is significant resource utilization associated with resubmitting manuscripts, heretofore not properly quantified. The vast majority of authors are not satisfied with the current process. Addressing these issues by reconciling reformatting requirements among journals or adopting a universal format-free initial submission policy would help resolve a major subject for the scientific research community and provide more efficient dissemination of findings.

India has the highest burden of Tuberculosis (TB) and multidrug-resistant TB (MDR-TB) worldwide. Innovative technology is the need of the hour to identify these cases that remain either undiagnosed or inadequately diagnosed due to the unavailability of appropriate tools at primary healthcare settings. We developed and evaluated 3 kits, namely ‘TB Detect’ (containing BioFM-Filter device), ‘TB Concentration and Transport’ (containing Trans-Filter device) and ‘TB DNA Extraction’ kits. These kits enable bio-safe equipment-free concentration of sputum on filters and improved fluorescence microscopy at primary healthcare centres, ambient temperature transport of dried inactivated sputum filters to central laboratories and molecular detection of drug resistance by PCR and DNA sequencing (Mol-DST). In a 2-site evaluation (n = 1190 sputum specimens) on presumptive TB patients, BioFM-Filter smear exhibited a significant increase in positivity of 7% and 4% over ZN smear and LED-FM smear (p

We propose to use Twitter data as social-spatial sensors. This study deals with the question whether research papers on certain diseases are perceived by people in regions (worldwide) that are especially concerned by these diseases. Since (some) Twitter data contain location information, it is possible to spatially map the activity of Twitter users referring to certain papers (e.g., dealing with tuberculosis). The resulting maps reveal whether heavy activity on Twitter is correlated with large numbers of people having certain diseases. In this study, we focus on tuberculosis, human immunodeficiency virus (HIV), and malaria, since the World Health Organization ranks these diseases as the top three causes of death worldwide by a single infectious agent. The results of the social-spatial Twitter maps (and additionally performed regression models) reveal the usefulness of the proposed sensor approach. One receives an impression of how research papers on the diseases have been perceived by people in regions that are especially concerned by these diseases. Our study demonstrates a promising approach for using Twitter data for research evaluation purposes beyond simple counting of tweets.

There is demand from science funders, industry, and the public that science should become more risk-taking, more out-of-the-box, and more interdisciplinary. Is it possible to tell how interdisciplinary and out-of-the-box scientific papers are, or which papers are mainstream? Here we use the bibliographic coupling network, derived from all physics papers that were published in the Physical Review journals in the past century, to try to identify them as mainstream, out-of-the-box, or interdisciplinary. We show that the network clusters into scientific fields. The position of individual papers with respect to these clusters allows us to estimate their degree of mainstreamness or interdisciplinary. We show that over the past decades the fraction of mainstream papers increases, the fraction of out-of-the-box decreases, and the fraction of interdisciplinary papers remains constant. Studying the rewards of papers, we find that in terms of absolute citations, both, mainstream and interdisciplinary papers are rewarded. In the long run, mainstream papers perform less than interdisciplinary ones in terms of citation rates. We conclude that to avoid a trend towards mainstreamness a new incentive scheme is necessary., 12 pages, 9 figures

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing.

AimsTo evaluate the relative efficiencies of five Internet-based digital and three paper-based scientific surveys and to estimate the costs for different-sized cohorts.MethodsInvitations to participate in a survey were distributed via e-mail to employees of two university hospitals (E1 and E2) and to members of a medical association (E3), as a link placed in a special text on the municipal homepage regularly read by the administrative employees of two cities (H1 and H2), and paper-based to workers at an automobile enterprise (P1) and college (P2) and senior (P3) students. The main parameters analyzed included the numbers of invited and actual participants, and the time and cost to complete the survey. Statistical analysis was descriptive, except for the Kruskal-Wallis-H-test, which was used to compare the three recruitment methods. Cost efficiencies were compared and extrapolated to different-sized cohorts.ResultsThe ratios of completely answered questionnaires to distributed questionnaires were between 81.5% (E1) and 97.4% (P2). Between 6.4% (P1) and 57.0% (P2) of the invited participants completely answered the questionnaires. The costs per completely answered questionnaire were $0.57-$1.41 (E1-3), $1.70 and $0.80 for H1 and H2, respectively, and $3.36-$4.21 (P1-3). Based on our results, electronic surveys with 10, 20, 30, or 42 questions would be estimated to be most cost (and time) efficient if more than 101.6-225.9 (128.2-391.7), 139.8-229.2 (93.8-193.6), 165.8-230.6 (68.7-115.7), or 188.2-231.5 (44.4-72.7) participants were required, respectively.ConclusionsThe study efficiency depended on the technical modalities of the survey methods and engagement of the participants. Depending on our study design, our results suggest that in similar projects that will certainly have more than two to three hundred required participants, the most efficient way of conducting a questionnaire-based survey is likely via the Internet with a digital questionnaire, specifically via a centralized e-mail.

SettingSouth Africa has the third highest tuberculosis (TB) burden in the world. Intensified case finding, recommended by WHO, is one way to control TB.ObjectiveTo evaluate the effectiveness and acceptability of a paper slip method for TB contact tracing.MethodTB patients were offered paper slips to give to their contacts, inviting them for TB screening. The number of contacts screened and the proportion diagnosed with TB was calculated. Contacts that returned to the clinic after receiving the slips were interviewed. A focus group discussion (FGD) with TB patients was held to determine their acceptability.ResultsFrom 718 paper slips issued, a 26% TB contact tracing rate was found, with a 12% case detection rate. The majority (68%) of contacts were screened within 2 weeks of receiving the slip. Age and gender were not significantly associated with time to screening. 16% of the contacts screened did not reside with the TB patients. 98% of the contacts said the method was acceptable. FGD findings show that this method is acceptable and may prevent stigma associated with TB/HIV.ConclusionThis simple, inexpensive method yields high contact tracing and case detection rates and potentially would yield additional benefits outside households.

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs.

E-readers are fast rivaling print as a dominant method for reading. Because they offer accessibility options that are impossible in print, they are potentially beneficial for those with impairments, such as dyslexia. Yet, little is known about how the use of these devices influences reading in those who struggle. Here, we observe reading comprehension and speed in 103 high school students with dyslexia. Reading on paper was compared with reading on a small handheld e-reader device, formatted to display few words per line. We found that use of the device significantly improved speed and comprehension, when compared with traditional presentations on paper for specific subsets of these individuals: Those who struggled most with phoneme decoding or efficient sight word reading read more rapidly using the device, and those with limited VA Spans gained in comprehension. Prior eye tracking studies demonstrated that short lines facilitate reading in dyslexia, suggesting that it is the use of short lines (and not the device per se) that leads to the observed benefits. We propose that these findings may be understood as a consequence of visual attention deficits, in some with dyslexia, that make it difficult to allocate attention to uncrowded text near fixation, as the gaze advances during reading. Short lines ameliorate this by guiding attention to the uncrowded span.

The paper mulberry is one of the multifunctional tree species in agroforestry systems and is also commonly utilized in traditional medicine in China and other Asian countries. However, little is known about its molecular genetics, which hinders research on and exploitation of this valuable resource. To discern the correlation between gene expression and the essential properties of the paper mulberry, we performed a transcriptomics analysis, assembling a total of 37,725 unigenes from 54,638,676 reads generated by RNA-seq. Among these, 22,692 unigenes showed greater than 60% similarity with genes from other species. The lengths of 13,566 annotated unigenes were longer than 1,000 bp. Functional clustering analysis with COG (Cluster of Orthologous Groups) revealed that 17,184 unigenes are primarily involved in transcription, translation, signal transduction, carbohydrate metabolism, secondary metabolism, and energy metabolism. GO (Gene Ontology) annotation suggests enrichment of genes encoding antioxidant activity, transporter activity, biosynthesis, metabolism and stress response, with a total of 30,659 unigenes falling in these categories. KEGG (Kyoto Encyclopedia of Genes and Genomes) metabolic pathway analysis showed that 7,199 unigenes are associated with 119 metabolic pathways. In addition to the basic metabolism, these genes are enriched for plant pathogen interaction, flavonoid metabolism and other secondary metabolic processes. Furthermore, differences in the transcriptomes of leaf, stem and root tissues were analyzed and 7,233 specifically expressed unigenes were identified. This global expression analysis provided novel insights about the molecular mechanisms of the biosynthesis of flavonoid, lignin and cellulose, as well as on the response to biotic and abiotic stresses including the remediation of contaminated soil by the paper mulberry.

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field., SCOPUS: ar.j, info:eu-repo/semantics/published

We describe a method that uses crowdsourced postcode coordinates and Google maps to estimate average distance and travel time for inhabitants of a municipality to a casualty clinic in Norway. The new method was compared with methods based on population centroids, median distance and town hall location, and we used it to examine how distance affects the utilisation of out-of-hours primary care services. At short distances our method showed good correlation with mean travel time and distance. The utilisation of out-of-hours services correlated with postcode based distances similar to previous research. The results show that our method is a reliable and useful tool for estimating average travel distances and travel times. publishedVersion

Ecological studies of orangutans have almost exclusively focused on populations living in primary or selectively logged rainforest. The response of orangutans to severe habitat degradation remains therefore poorly understood. Most experts assume that viable populations cannot survive outside undisturbed or slightly disturbed forests. This is a concern because nearly 75% of all orangutans live outside protected areas, where degradation of natural forests is likely to occur, or where these are replaced by planted forests. To improve our understanding of orangutan survival in highly altered forest habitats, we conducted population density surveys in two pulp and paper plantation concessions in East Kalimantan, Indonesia. These plantations consist of areas planted with fast-growing exotics intermixed with stands of highly degraded forests and scrublands. Our rapid surveys indicate unexpectedly high orangutan densities in plantation landscapes dominated by Acacia spp., although it remains unclear whether such landscapes can maintain long-term viable populations. These findings indicate the need to better understand how plantation-dominated landscapes can potentially be incorporated into orangutan conservation planning. Although we emphasize that plantations have less value for overall biodiversity conservation than natural forests, they could potentially boost the chances of orangutan survival. Our findings are based on a relatively short study and various methodological issues need to be addressed, but they suggest that orangutans may be more ecologically flexible than previously thought.

Environmental DNA (eDNA) analysis has gained traction as a precise and cost-effective method for species and waterways management. To date, publications on eDNA protocol optimization have focused primarily on DNA yield. Therefore, it has not been possible to evaluate the cost and speed of specific components of the eDNA protocol, such as water filtration and DNA extraction method when designing or choosing an eDNA protocol. At the same time, these two parameters are essential for the experimental design of a project. Here we evaluate and rank 27 different eDNA protocols in the context of Chinook salmon (Oncorhynchus tshawytscha) eDNA detection in an estuarine environment. We present a comprehensive evaluation of multiple eDNA protocol parameters, balancing time, cost and DNA yield. We collected samples composed of 500 mL estuarine water from Deverton Slough (38°11'16.7"N 121°58'34.5"W) and 500 mL from tank water containing 1.3 juvenile Chinook Salmon per liter. Then, we compared extraction methods, filter types, use of inhibitor removal kit for DNA yield, processing time, and protocol cost. Lastly, we used an MCMC algorithm together with machine learning to understand the DNA yield of each step of the protocol as well as the interactions between those steps. Glass fiber filtration was to be the most resilient to high turbidites, filtering the samples in 2.32 ± 0.08 min instead of 14.16 ± 1.86 min and 6.72 ± 1.99 min for nitrocellulose and paper filter N1, respectively. The filtration DNA yield percentages for paper filter N1, glass fiber, and nitrocellulose were 0.00045 ± 0.00013, 0.00107 ± 0.00013, 0.00172 ± 0.00013. The DNA extraction yield percentage for QIagen, dipstick, NaOH, magnetic beads, and direct dipstick ranged from 0.047 ± 0.0388 to 0.475 ± 0.0357. For estuarine waters, which are challenging for eDNA studies due to high turbidity, variable salinity, and the presence of PCR inhibitors, we found that a protocol combining glass filters, magnetic beads, and an extra step for PCR inhibitor removal, is the method that best balances time, cost, and yield. In addition, we provide a generalized decision tree for determining the optimal eDNA protocol for other studies in aquatic systems. Our findings should be applicable to most aquatic environments and provide a clear guide for determining which eDNA protocol should be used under different study constraints.

Many microbial phenotypes are differentially or exclusively expressed on agar surfaces, including biofilms, motility, and sociality. However, agar-based assays are limited by their low throughput, which increases costs, lab waste, space requirements, and the time required to conduct experiments. Here, we demonstrate the use of wax-printed microfluidic paper-based analytical devices (μPADs) to measure linear growth rate of microbes on an agar growth media as a means of circumventing the aforementioned limitations. The main production materials of the proposed μPAD design are a wax printer, filter paper, and empty pipet boxes. A single wax-printed μPAD allowing 8 independent, agar-grown colonies costs $0.07, compared to $0.20 and $9.37 for the same number of replicates on traditional microtiter/spectrophotometry and Petri dish assays, respectively. We optimized the μPAD design for channel width (3 mm), agar volume (780 μL/channel), and microbe inoculation method (razor-blade). Comparative analyses of the traditional and proposed μPAD methods for measuring growth rate of nonmotile (Saccharomyces cerevisiae) and motile (flagellated Escherichia coli) microorganisms suggested the μPAD assays conferred a comparable degree of accuracy and reliability to growth rate measurements as their traditional counterparts. We substantiated this claim with strong, positive correlations between the traditional and μPAD assay, a significant nonzero slope in the model relating the two assays, a nonsignificant difference between the relative standard errors of the two techniques, and an analysis of inter-device reliability. Therefore, μPAD designs merit consideration for the development of enhanced-throughput, low-cost microbial growth and motility assays.

The highly contagious nature of SARS-CoV-2 has led to several studies on the transmission of the virus. A little studied potential fomite of great concern in the community is currency, which has been shown to harbor microbial pathogens in several studies. Since the onset of the COVID-19 pandemic, many businesses in the United States have limited the use of banknotes in favor of credit cards. However, SARS-CoV-2 has shown greater stability on plastic in several studies. Herein, the stability of SARS-CoV-2 at room temperature on banknotes, money cards and coins was investigated. In vitro studies with live virus suggested SARS-CoV-2 was highly unstable on banknotes, showing an initial rapid reduction in viable virus and no viral detection by 24 hours. In contrast, SARS-CoV-2 displayed increased stability on money cards with live virus detected after 48 hours. Environmental swabbing of currency and money cards on and near the campus of Brigham Young University supported these results, with no detection of SARS-CoV-2 RNA on banknotes, and a low level on money cards. However, no viable virus was detected on either. These preliminary results suggest that the use of money cards over banknotes in order to slow the spread of this virus may be ill-advised. These findings should be investigated further through larger environmental studies involving more locations.

In accordance with the opinion of the World Health Organization and the World Water Council the development of effective technologies for the treatment of wastewater from heavy metals for their discharge into water bodies or reuse is an urgent task nowadays. Phytoremediation biotechnologies is the most environmentally friendly and cheapest way of the treatment of wastewater, suitable for sustainable development principals. The main disadvantage of the phytoremediation is the slow speed of the process. A method for accelerating the process of phytoremediation by the combined effect of magnetic and weak electric fields is proposed. The purpose of this study is to determine the values of the parameters of the magnetic and weak electric fields that are most suitable for extracting cuprum ions from wastewater using the higher aqua plants (Lemna minor). A corresponding technological process based on the results of the study is proposed. The results have shown that the removal of copper cations from sulfate solutions effectively occurs in the initial period of time (1–5 hours) under the influence of a magnetic field with an intensity of H = 2 kA/m. Under the combined influence of an electrical current with density j = 240 μA/cm2 and a magnetic field (H = 2 kA/m) the highest rate of copper extraction by duckweed leaves is achieved. Under these conditions, the greatest growth and development of plant leaves occurs. The paper presents the results of determining of the parameters of the electrochemical release from the eluate of the spent phytomass of duckweed. It has been determined that the release of metal occurs at E = 0.32 V. An original scheme for wastewater treatment from copper with subsequent separation of copper from the spent phytomass of duckweed is proposed. In general, the presented results are a scientific justification of wastewater treatment technologies and a contribution to resolving the crisis in the field of fresh water supply. An important contribution in the circular economy is a technology recommendation proposed for recovering copper from duckweed after wastewater treatment.

This study, based in San Bernardino County, Southern California, collected and examined tap water samples within the area to explore the feasibility of adopting non-industrial equipment and methods to reduce water hardness and total dissolved solids(TDS). We investigated how water quality could be improved by utilizing water boiling, activated carbon and sodium bicarbonate additives, as well as electrolysis methods. The results show that heating is effective at lower temperatures rather than long boils, as none of the boiling tests were lower than the original value. Activated carbon is unable to lower TDS, because it is unable to bind to any impurities present in the water. This resulted in an overall TDS increase of 3.5%. However, adding small amounts of sodium bicarbonate(NaHCO3) will further eliminate water hardness by reacting with magnesium ions and improve taste, while increasing the pH. When added to room temperature tap water, there is a continuous increase in TDS of 24.8% at the 30 mg/L mark. The new findings presented in this study showed that electrolysis was the most successful method in eliminating TDS, showing an inverse proportion where an increasing electrical current and duration of electrical lowers more amounts of solids. This method created a maximum decrease in TDS by a maximum of 22.7%, with 3 tests resulting in 15.3–16.6% decreases. Furthermore, when water is heated to a temperature around 50°C (122°F), a decrease in TDS of around 16% was also shown. The reduction of these solids will help lower water hardness and improve the taste of tap water. These results will help direct residents to drink more tap water rather than bottled water with similar taste and health benefits for a cheaper price as well as a reduction on plastic usage.

Scholars traditionally receive career credit for a paper based on where in the author list they appear, but position in an author list often carries little information about what the contribution of each researcher was. “Contributorship” refers to a movement to formally document the nature of each researcher’s contribution to a project. We discuss the emerging CRediT standard for documenting contributions and describe a web-based app and R package called tenzing that is designed to facilitate its use. tenzing can make it easier for researchers on a project to plan and record their planned contributions and to document those contributions in a journal article.

Fiber release during domestic textile washing is a cause of marine microplastic pollution, but better understanding of the magnitude of the issue and role of fabric care products, appliances and washing cycles is needed. Soiled consumer wash loads from U.K. households were found to release a mean of 114 ± 66.8 ppm (mg microfiber per kg fabric) (n = 79) fibers during typical washing conditions and these were mainly composed of natural fibers. Microfiber release decreased with increasing wash load size and hence decreasing water to fabric ratio, with mean microfiber release from wash loads in the mass range 1.0-3.5 kg (n = 57) found to be 132.4 ± 68.6 ppm, significantly (p = 3.3 x 10-8) higher than the 66.3 ± 27.0 ppm of those in the 3.5-6.0 kg range (n = 22). In further tests with similar soiled consumer wash loads, moving to colder and quicker washing cycles (i.e. 15°C for 30 mins, as opposed to 40°C for 85 mins) significantly reduced microfiber generation by 30% (p = 0.036) and reduced whiteness loss by 42% (p = 0.000) through reduced dye transfer and soil re-deposition, compared to conventional 40°C cycles. In multicycle technical testing, detergent pods were selected for investigation and found to have no impact on microfiber release compared to washing in water alone. Fabric softeners were also found to have no direct impact on microfiber release in testing under both European and North American washing conditions. Extended testing of polyester fleece garments up to a 48-wash cycle history under European conditions found that microfiber release significantly reduced to a consistent low level of 28.7 ± 10.9 ppm from eight through 64 washes. Emerging North American High-Efficiency top-loading washing machines generated significantly lower microfiber release than traditional top-loading machines, likely due to their lower water fill volumes and hence lower water to fabric ratio, with a 69.7% reduction observed for polyester fleece (n = 32, p = 7.9 x 10-6) and 37.4% reduction for polyester T-shirt (n = 32, p = 0.0032). These results conclude that consumers can directly reduce the levels of microfibers generated per wash during domestic textile washing by using colder and quicker wash cycles, washing complete (but not overfilled) loads, and (in North America) converting to High-Efficiency washing machines. Moving to colder and quicker cycles will also indirectly reduce microfiber release by extending the lifetime of clothing, leading to fewer new garments being purchased and hence lower incidence of the high microfiber release occurring during the first few washes of a new item.

Synthetic fibers are increasingly seen to dominate microplastic pollution profiles in aquatic environments, with evidence pointing to textiles as a potentially important source. However, the loss of microfibers from textiles during laundry is poorly understood. We evaluated microfiber release from a variety of synthetic and natural consumer apparel textile samples (n = 37), with different material types, constructions, and treatments during five consecutive domestic laundry cycles. Microfiber loss ranged from 9.6 mg to 1,240 mg kg-1 of textile per wash, or an estimated 8,809 to > 6,877,000 microfibers. Mechanically-treated polyester samples, dominated by fleeces and jerseys, released six times more microfibers (161 ± 173 mg kg-1 per wash) than did nylon samples with woven construction and filamentous yarns (27 ± 14 mg kg-1 per wash). Fiber shedding was positively correlated with fabric thickness for nylon and polyester. Interestingly, cotton and wool textiles also shed large amounts of microfibers (165 ± 44 mg kg-1 per wash). The similarity between the average width of textile fibers here (12.4 ± 4.5 μm) and those found in ocean samples provides support for the notion that home laundry is an important source of microfiber pollution. Evaluation of two marketed laundry lint traps provided insight into intervention options for the home, with retention of up to 90% for polyester fibers and 46% for nylon fibers. Our observation of a > 850-fold difference in the number of microfibers lost between low and high shedding textiles illustrates the strong potential for intervention, including more sustainable clothing design.

In newborn screening, samples suspected for congenital adrenal hyperplasia (CAH), a potentially lethal inborn error of steroid biosynthesis, need to be confirmed using liquid chromatography–tandem mass spectrometry. Daily quality controls (QCs) for the 2nd-tier CAH assay are not commercially available and are therefore generally prepared within the laboratory. For the first time, we aimed to compare five different QC preparation approaches used in routine diagnostics for CAH on the concentrations of cortisol, 21-deoxycortisol, 11-deoxycortisol, 4-androstenedione and 17-hydroxyprogesterone in dried blood spots. The techniques from Prep1 to Prep5 were tested at two analyte concentrations by spiking aliquots of a steroid-depleted blood, derived from washed erythrocyte suspension and steroid-depleted serum. The preparation processes differed in the sequence of the preparation steps and whether freeze-thaw cycles were used to facilitate blood homogeneity. The five types of dried blood spot QCs were assayed and quantitated in duplicate on five different days using a single calibration row per day. Inter-assay variations less than 15% and concentrations within ±15% of the nominal values were considered acceptable. Results obtained by means of the four dried blood spot QC preparation techniques (Prep1, Prep2, Prep4 and Prep5) were statistically similar and remained within the ±15% ranges in terms of both reproducibility and nominal values. However, concentration results for Prep3 (spiking prior to three freeze-thaw cycles) were significantly lower than the nominal values in this setting, with differences exceeding the ±15% range in many cases despite acceptable inter-assay variations. These findings have implications for the in-house preparation of QC samples in laboratory developed tests for CAH, including 2nd-tier assays in newborn screening.

The massive growth of potentially toxic cyanobacteria in water supply reservoirs, such as Legedadi Reservoir (Ethiopia), poses a huge burden to water purification units and represents a serious threat to public health. In this study, we evaluated the efficiency of the flocculants/coagulants chitosan, Moringa oleifera seed (MOS), and poly-aluminium chloride (PAC) in settling cyanobacterial species present in the Legedadi Reservoir. We also tested whether coagulant-treated reservoir water promotes cyanobacteria growth. Our data showed that suspended solids in the turbid reservoir acted as ballast, thereby enhancing settling and hence the removal of cyanobacterial species coagulated with chitosan, Moringa oleifera seed, or their combination. Compared to other coagulants, MOS of 30 mg/L concentration, with the removal efficiency of 93.6%, was the most effective in removing cyanobacterial species without causing cell lysis. Contrary to our expectation, PAC was the least effective coagulant. Moreover, reservoir water treated with MOS alone or MOS combined with chitosan did not support any growth of cyanobacteria during the first two weeks of the experiment. Our data indicate that the efficacy of a flocculant/coagulant in the removal of cyanobacteria is influenced by the uniqueness of individual lakes/reservoirs, implying that mitigation methods should consider the unique characteristic of the lake/reservoir.

The objective of this study is to verify the feasibility of using biochar made from crop straw as a bitumen additive to improve some properties of bitumen. The differences between crop straw biochar prepared in a laboratory and commercial charcoal were investigated through scanning electron microscopy and laser particle size analyses. Furthermore, biochar-modified asphalt was prepared using the high-speed shear method, and the penetration, softening point, ductility at 15°C, and apparent viscosity of the asphalt binder with 6% biochar were measured at 120, 135, 150, 160, and 175°C. It was found that both the crop straw biochar and the commercial charcoal consist mainly of C, O, Si, and K, but the C content of crop straw biochar is slightly higher than that of commercial charcoal. The particle size of biochar is smaller than that of commercial charcoal, while the specific surface area is larger. It was determined that the addition of crop straw biochar significantly improved the high-temperature performance of asphalt, and that biochar and commercial charcoal have a similar influence on the high temperature performance of asphalt.

Passiflora quadrangularis L. belongs to the family Passifloraceae which bears larger fruit with edible juicy mesocarp and pulp known as a good source of phytochemicals. Cultivation and plant management practices are known to influence the phytochemical compositions of agricultural produce. This study aimed to examine the influence of the cultivation practices on the antioxidant activities and secondary metabolites of the organically and conventionally grown P. quadrangularis. Findings revealed organically treated P. quadrangularis plants showed enhancement in their antioxidant properties and secondary metabolites profiles. Among the plant parts, leaves of P. quadrangularis grown organically possessed higher antioxidant activities compared to the conventional in all assays evaluated. The antioxidant activities in the edible parts of the P. quadrangularis fruit have also been enhanced through organic cultivation with significantly higher total phenolic content and DPPH in mesocarp, and the pulp showed higher total flavonoid content, DPPH and FRAP. This observation is supported by a higher level of vitamins and secondary metabolites in the samples. The secondary metabolites profile showed mesocarps were phenolic rich, the pulps were flavonoids rich while leaves showed good composition of phenolics, flavonoids and terpenoids with outstanding antioxidant activities. The common secondary metabolites for organically produced P. quadrangularis in different plant parts include 2-isopropyl-3-methoxycinnamic acid (mesocarp and pulp), myricetin isomers (pulp and leaves), and malvidin-3-O-arabinoside isomers (pulp and leaves). This study confirmed that organic cultivated P. quadrangularis possessed higher antioxidant activities contributed by its vitamins and secondary metabolites.

Concentrating fruit juices by freezing supports the maintenance of both nutrients and flavors. Development of the freezing concentration process has introduced equipment such as centrifuge or block freezing systems, which are suitable for large-scale commercial processing. However, the necessary characteristics of freeze concentration methods for juices include simplicity and low cost. This study examined the effects of different container shapes on the processes of freezing and melting. The shape of the container was found to be more important than the melting temperature, across a relatively large scale. Furthermore, the nutrient procyanidin B2 and saccharides were concentrated. The methods concentrated juice components under low cost conditions without complex equipment. This research thus not only offers benefits for commercial juice preparation but also provides new insight into effects of shape differences in concentration technologies.

Globally, the economic losses due to hard ticks infestation and the control of the associated diseases have been calculated at USD $13.9–18.7 billion per year. The economic impact is related to its direct damage to the skins, blood loss, anemia, severe immunological reactions and indirect losses that related to the effects of hemoparasites, cost of treatment for clinical cases and expenses incurred in the control of ticks. The current study evaluated the acaricidal activities of fennel Foeniculum vulgare essential oil and its main components; trans-anethole and fenchone; against R. annulatus. GC–MS analysis revealed that this oil contained 16 components representing 99.9% of the total identified compounds with E-anethole being the predominant component(64.29%), followed by fenchone (9.94%). The fennel oil and trans-anethole showed significant acaricidal activities. The LC50 of the fennel oil was attained at concentrations of 12.96% for adult ticks and 1.75% for tick larvae meanwhile the LC50 of trans-anethole was reached at concentrations of 2.36% for adult tick and 0.56% for tick larvae. On the contrary, fenchone showed no any significant adulticidal activities and its LC50 attained at a concentration of 9.11% for tick larvae. Regarding repellence activities, trans-anethole achieved 100% repellency at the concentration of 10% while fennel showed 86% repellency at the same concentration. Fenchone showed no repellency effect. Treatment of larvae with fennel, trans-anethole, and fenchone LC50 concentrations significantly inhibited the acetylcholinesterase activity. Meanwhile, glutathione s-transferase activity was significantly decreased in fennel treated larvae but no significant effect was found in the larvae of trans-anethole and fenchone groups. These results indicate that the acaricide effect of fennel oil may attributed to its high content of trans-anethole. This was supported by potent adulticidal, larvicidal, and repellency effects of trans-anethole against Rhipeciphalus annulatus tick and therefore it could be included in the list of acaricide of plant origin.

A synthetic microbial consortium called Effective Microorganisms (EM) consists mainly of photosynthetic bacteria, lactic acid bacteria and yeast. Various effects of EM∙XGOLD, a health drink produced by EM, on life cycle of Dictyostelium discoideum were described previously. Here, we report our attempt to identify the active principle, termed EMF, that brought about the observed effects. Throughout the purification processes, the presence of the active principle was monitored by promoted fruiting body formation. By liquid-liquid separation the activity was recovered in aqueous phase, which, after concentration, was further subjected to reverse-phase column chromatography. No activity was detected in any eluant, while almost all the activity was recovered in residual insoluble material. The application of conventional organic chemistry procedures to the residual fraction did not lead to any informative results. Acid treatment of the insoluble material produced air bubbles, suggesting it to be composed of some inorganic carbonate. Viewed under scanning electronmicroscope, the residue revealed spherical particles of μm size range. Energy Dispersive X-ray (EDX) Spectroscopy pointed to the existence, on the surface of the particles, of magnesium and, to a certain extent, of potassium. In separate experiments, acid treatment and alkali neutralization of EM∙XGOLD completely wiped out the stimulatory activity of fruiting body formation. These lines of evidence indicate these Mg, K-containing microparticles to be an active principle of EM culture extract. How these particles exert their effect is currently under intensive investigation.

Annually, agricultural activity produces an enormous amount of plant biomass by-product. Many studies have reported the biomethane potential of agro-industrial wastes, but only a few studies have investigated applying the substrates in both batch and continuous mode. Tomato is one of the most popular vegetables globally; its processing releases a substantial amount of by-product, such as stems and leaves. This study examined the BMP of tomato plant (Solanum lycopersicum Mill. L. cv. Alfred) waste. A comparative test revealed that the BMPs of corn stover, tomato waste,and their combination were approximately the same, around 280 mL methane/g Volatile Solid. In contrast, the relative biogas production decreased in the presence of tomato waste in a continuous mesophilic anaerobic digestion system; the daily biogas productions were 860 ± 80, 290 ± 50, and 570 ± 70 mL biogas/gVolatile Solid/day in the case of corn stover, tomato waste, and their mixture, respectively. The methane content of biogas was around 46–48%. The fermentation parameters of the continuous AD experiments were optimal in all cases; thus, TW might have an inhibitory effect on the microbial community. Tomato plant materials contain e.g. flavonoids, glycoalkaloids (such as tomatine and tomatidine), etc. known as antimicrobial and antifungal agents. The negative effect of tomatine on the biogas yield was confirmed in batch fermentation experiments. Metagenomic analysis revealed that the tomato plant waste caused significant rearrangements in the microbial communities in the continuously operated reactors. The results demonstrated that tomato waste could be a good mono-substrate in batch fermentations or a co-substrate with corn stover in a proper ratio in continuous anaerobic fermentations for biogas production. These results also point to the importance of running long-term continuous fermentations to test the suitability of a novel biomass substrate for industrial biogas production.

Despite the development of effective vaccines against SARS-CoV-2, epidemiological control of the virus is still challenging due to slow vaccine rollouts, incomplete vaccine protection to current and emerging variants, and unwillingness to get vaccinated. Therefore, frequent testing of individuals to identify early SARS-CoV-2 infections, contact-tracing and isolation strategies remain crucial to mitigate viral spread. Here, we describe WHotLAMP, a rapid molecular test to detect SARS-CoV-2 in saliva. WHotLAMP is simple to use, highly sensitive (3.6 viral RNA copies per microliter of saliva) and specific, as well as inexpensive, making it ideal for frequent screening. Moreover, WHotLAMP does not require toxic chemicals or specialized equipment and thus can be performed in point-of-care settings, and may also be adapted for resource-limited environments or home use. While applied here to SARS-CoV-2, WHotLAMP can be modified to detect other pathogens, making it adaptable for other diagnostic assays, including for use in future outbreaks.

Phytoseiids are predatory mites that prey on other mites and small arthropods, and several species are used in commercial agriculture for biological control of pests. To optimize phytoseiid mites' use in biocontrol, an efficient method for oral delivery of test compounds is required to assess their sensitivities to pesticides, RNAi for gene functional analysis and artificial diets. Here we developed four methods for oral delivery of a solution of xenobiotics to different life stages of the commercially available generalist predatory mite Neoseiulus californicus: (i) soaking mites in the solution, or allowing them to feed on (ii) spider mites soaked in the solution, (iii) a solution droplet, or (iv) solution-saturated filter paper. As measured by ingestion of a tracer dye, the droplet-based feeding system was most efficient; the dye was observed in the alimentary canal of >90% test mites of all life stages, with no mortality. The droplet-based feeding system was also effective for the commercially available specialist predatory mite Phytoseiulus persimilis, with >80% delivery efficiency. This study paves the way for development of methods for high-throughput RNAi and for toxicological or nutritional assays in phytoseiid mites.