Search

South Korea is ranked as 4th among 34 nations of the Organization for Economic Cooperation and Development with 102 deaths in road accidents per one million population. This paper aims to investigate the factors associated with road accidents in South Korea. The rainfall data of the Korea Meteorological Administration and road accidents data of Traffic Accident Analysis System of Korea Road Traffic Authority is analyzed for this purpose. In this connection, multivariate regression analysis and ratio analysis with the descriptive analysis are performed to uncover the catastrophic factors involved. In turn, the results reveal that traffic volume is the leading factor in road accidents. The limited road extension of 1.47% compared to the 4.14% per annum growth of the vehicles is resulting in road accidents at such a large scale. The increasing proportion of passenger cars accelerate road accidents as well. 56% of accidents occur by the infringement of safety driving violations. The drivers with higher driving experience tend to have a higher accident ratio. The collected data is analyzed in terms of gender, driver experience, type of violations and accidents as well as the associated time of the accidents when they happen. The results indicate that 36.29% and 53.01% of accidents happen by male drivers in the day and night time, respectively. 29.15% of crashes happen due to safety infringement and violations of 41 to 60 years old drivers. The results demonstrate that population density is associated with the accidents frequency and lower density results in an increased number of accidents. The necessity of the state-of-the-art regulations to govern the urban road traffic is beyond dispute, and it becomes even more crucial for citizens’ relief since in our daily lives road accidents are getting more diverse. [ABSTRACT FROM AUTHOR]

This paper presents an evaluation of the effectiveness of two types of deceleration markings on freeways in China: fishbone-shaped (FS) markings and edge-rate (ER) markings. An actual 4-lane, 6-km long freeway in Province Hebei was created in a driving simulator and used for the experiments. Three scenarios of deceleration markings were adopted: one without markings, one with FS markings, and the third with ER markings. For each scenario, three traffic flow levels were adopted (low, medium, and heavy). The appropriate dimensions of deceleration markings were first established using relevant design guidelines and then used to develop the simulation scenarios using Multigen Creator software. Sixty drivers carried out the simulation experiments with eye tracker equipment. The adequacy of deceleration markings was analyzed with respect to speed, perceived distance, pupil diameter, and geometric parameters. The results showed that both types of deceleration markings made a certain effect on vehicle speed, drivers’visual behavior, and mental characteristics. However, the effect of the FS markings was more pronounced than that of the ER marking. Specifically, the FS markings showed a speed reduction of 12.3 km/h to 15.2 km/h and a perceived distance of 70 m to 90 m, compared with 6.7 km/h to 9.9 km/h and 40 m to 60 m, respectively, for the ER markings. Application comments of the results are provided in the conclusion. [ABSTRACT FROM AUTHOR]

Due to their simplicity and operating mode, magnetic loops are one of the most used traffic sensors in Intelligent Transportation Systems (ITS). However, at this moment, their potential is not being fully exploited, as neither the speed nor the length of the vehicles can be surely ascertained with the use of a single magnetic loop. In this way, nowadays the vast majority of them are only being used to measure traffic flow and count vehicles on urban and interurban roads. This is the reason why we presented in a previous paper the double magnetic loop, capable of improving the features and functionalities of the conventional single loop without increasing the cost or introducing additional complexity. In that paper, it was introduced their design and peculiarities, how to calculate their magnetic field and three different methods to calculate their inductance. Therefore, with the purpose of improving the existing infrastructure and providing it with greater potential and reliability, this paper will focus on justifying and demonstrating the advantages offered by these double loops versus the conventional ones. This will involve analyzing the magnetic profiles generated by the passage of vehicles over double loops and comparing them with those already known. Moreover, it will be shown how the vehicle speed, the traffic direction and many other data can be obtained more easily and with less margin of error by using these new inductance signatures. [ABSTRACT FROM AUTHOR]

This paper focuses on the effects of vehicle gap changes on fuel and emission performance of the simulated traffic flow in the adaptive cruise control (ACC) strategy. Firstly, the close correlation of vehicle gap changes and the host car's behaviors was explored with the measured car-following data. Secondly, the correlation between the host car's velocity and vehicle gap changes with different memory steps was also explored to develop the nth car’s optimal velocity function. Thirdly, a microscopic traffic simulation program was created for analyzing the traffic flow evolution process and approximately estimating the fuel consumptions and exhaust emissions. As a result, it was seen that vehicle gap changes with memory significantly affect fuel economy and emission performance of the simulated traffic flow in the ACC strategy, which can result in low fuel consumptions and exhaust emissions. This study is an incremental step forward for designing the control strategy of the ACC system. [ABSTRACT FROM AUTHOR]

Cities around the world are inundated by cars and suffer traffic congestion that results in excess delays, reduced safety and environmental pollution. The interplay between road infrastructure and travel choices defines the level and the spatio-temporal extent of congestion. Given the existing infrastructure, understanding how the route choice decisions are made and how travellers interact with each other is a crucial first step in mitigating traffic congestion. This is a problem with fundamental importance, as it has implications for other limited supply systems where agents compete for resources and reach an equilibrium. Here, we observe the route choice decisions and the traffic conditions through an extensive data set of GPS trajectories. We compare the actual paths followed by travellers to those implied by equilibrium conditions (i) at a microscopic scale, where we focus on individual path similarities, and (ii) at a macroscopic scale, where we perform network-level comparison of the traffic loads. We present that non-cooperative or selfish equilibrium replicates the actual traffic (to a certain extent) at the macroscopic scale, while the majority of individual decisions cannot be reproduced by neither selfish nor cooperative equilibrium models. [ABSTRACT FROM AUTHOR]

Along with the rapid development of Intelligent Transportation Systems, traffic data collection technologies have progressed fast. The emergence of innovative data collection technologies such as remote traffic microwave sensor, Bluetooth sensor, GPS-based floating car method, and automated license plate recognition, has significantly increased the variety and volume of traffic data. Despite the development of these technologies, the missing data issue is still a problem that poses great challenge for data based applications such as traffic forecasting, real-time incident detection, dynamic route guidance, and massive evacuation optimization. A thorough literature review suggests most current imputation models either focus on the temporal nature of the traffic data and fail to consider the spatial information of neighboring locations or assume the data follow a certain distribution. These two issues reduce the imputation accuracy and limit the use of the corresponding imputation methods respectively. As a result, this paper presents a Kriging based data imputation approach that is able to fully utilize the spatiotemporal correlation in the traffic data and that does not assume the data follow any distribution. A set of scenarios with different missing rates are used to evaluate the performance of the proposed method. The performance of the proposed method was compared with that of two other widely used methods, historical average and K-nearest neighborhood. Comparison results indicate that the proposed method has the highest imputation accuracy and is more flexible compared to other methods. [ABSTRACT FROM AUTHOR]

Worldwide, more than one million people die on the roads each year. A third of these fatal accidents are attributed to speeding, with properties of the individual driver and the environment regarded as key contributing factors. We examine real-world speeding behavior and its interaction with illuminance, an environmental property defined as the luminous flux incident on a surface. Drawing on an analysis of 1.2 million vehicle movements, we show that reduced illuminance levels are associated with increased speeding. This relationship persists when we control for factors known to influence speeding (e.g., fluctuations in traffic volume) and consider proxies of illuminance (e.g., sight distance). Our findings add to a long-standing debate about how the quality of visual conditions affects drivers’ speed perception and driving speed. Policy makers can intervene by educating drivers about the inverse illuminance‒speeding relationship and by testing how improved vehicle headlights and smart road lighting can attenuate speeding. [ABSTRACT FROM AUTHOR]

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios. [ABSTRACT FROM AUTHOR]

Variation in longitudinal control in driving has been discussed in both traffic psychology and transportation engineering. Traffic psychologists have concerned themselves with “driving style”, a habitual form of behavior marked by it’s stability, and its basis in psychological traits. Those working in traffic microsimulation have searched for quantitative ways to represent different driver-car systems in car following models. There has been unfortunately little overlap or theoretical consistency between these literatures. Here, we investigated relationships between directly observable measures (time headway, acceleration and jerk) in a simulated driving task where the driving context, vehicle and environment were controlled. We found individual differences in the way a trade-off was made between close but jerky vs. far and smooth following behavior. We call these “intensive” and “calm” driving, and suggest this trade-off can serve as an indicator of a possible latent factor underlying driving style. We posit that pursuing such latent factors for driving style may have implications for modelling driver heterogeneity across various domains in traffic simulation. [ABSTRACT FROM AUTHOR]

This paper presents the use of the Aimsun microsimulation program to simulate vehicle violating behaviors and observe their impact on road traffic crash risk. Plugins for violations of speeding, slow driving, and abrupt stopping were developed using Aimsun’s API and SDK module. A safety analysis plugin for investigating probability of rear-end collisions was developed, and a method for analyzing collision risk is proposed. A Fuzzy C-mean Clustering algorithm was developed to identify high risk states in different road segments over time. Results of a simulation experiment based on the G15 Expressway in Shanghai showed that abrupt stopping had the greatest impact on increasing collision risk, and the impact of violations increased with traffic volume. The methodology allows for the evaluation and monitoring of risks, alerting of road hazards, and identification of hotspots, and could be applied to the operations of existing facilities or planning of future ones. [ABSTRACT FROM AUTHOR]

In this paper, we aim to examine the relationship between traffic flow and potential conflict risks by using crash surrogate metrics. It has been widely recognized that one traffic flow corresponds to two distinct traffic states with different speeds and densities. In view of this, instead of simply aggregating traffic conditions with the same traffic volume, we represent potential conflict risks at a traffic flow fundamental diagram. Two crash surrogate metrics, namely, Aggregated Crash Index and Time to Collision, are used in this study to represent the potential conflict risks with respect to different traffic conditions. Furthermore, Beijing North Ring III and Next Generation SIMulation Interstate 80 datasets are utilized to carry out case studies. By using the proposed procedure, both datasets generate similar trends, which demonstrate the applicability of the proposed methodology and the transferability of our conclusions. [ABSTRACT FROM AUTHOR]

To deal with the conflicts between left-turn and through traffic streams and increase the discharge capacity, this paper addresses the pre-signal which is implemented at a signalized intersection. Such an intersection with pre-signal is termed as a tandem intersection. For the tandem intersection, phase swap sorting strategy is deemed as the most effective phasing scheme in view of some exclusive merits, such as easier compliance of drivers, and shorter sorting area. However, a major limitation of the phase swap sorting strategy is not considered in previous studies: if one or more vehicle is left at the sorting area after the signal light turns to red, the capacity of the approach would be dramatically dropped. Besides, previous signal control studies deal with a fixed timing plan that is not adaptive with the fluctuation of traffic flows. Therefore, to cope with these two gaps, this paper firstly takes an in-depth analysis of the traffic flow operations at the tandem intersection. Secondly, three groups of loop detectors are placed to obtain the real-time vehicle information for adaptive signalization. The lane selection behavior in the sorting area is considered to set the green time for intersection signals. With the objective of minimizing the vehicle delay, the signal control parameters are then optimized based on a dynamic programming method. Finally, numerical experiments show that average vehicle delay and maximum queue length can be reduced under all scenarios. [ABSTRACT FROM AUTHOR]

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a minimum study duration of four years for Before-After, and a minimum of either four years or four sites for Before-After-Control-Impact designs. [ABSTRACT FROM AUTHOR]

Branch roads, which are densely distributed in cities, allow for the flow of local traffic and provide connections between the city and outlying areas. Branch roads are typically narrow, and two-way traffic flows on branch roads are thus affected when vehicles traveling in opposite directions meet. This study investigates the changes in the velocities of vehicles when they meet on two-way branch roads. Various widths of branch roads were selected, and their influence on traffic flows was investigated via a video survey. The results show that, depending on the average vehicle velocity, branch roads require different widths to prevent a large decrease in velocity when vehicles meet. When the velocity on a branch road is not high (e.g., the average velocity without meeting is approximately 6 m/s), appropriately increasing the road width will notably increase the meeting velocity. However, when the velocity is high (e.g., the average velocity without meeting is greater than 10 m/s), there is a large decrease in velocity when meeting even if the road surface is wide (6.5 m). This study provides a basis for selecting the width of urban branch roads and the simulation of bidirectional traffic on such roads. [ABSTRACT FROM AUTHOR]

Travel time is an important measurement used to evaluate the extent of congestion within road networks. This paper presents a new method to estimate the travel time based on an evolving fuzzy neural inference system. The input variables in the system are traffic flow data (volume, occupancy, and speed) collected from loop detectors located at points both upstream and downstream of a given link, and the output variable is the link travel time. A first order Takagi-Sugeno fuzzy rule set is used to complete the inference. For training the evolving fuzzy neural network (EFNN), two learning processes are proposed: (1) a K-means method is employed to partition input samples into different clusters, and a Gaussian fuzzy membership function is designed for each cluster to measure the membership degree of samples to the cluster centers. As the number of input samples increases, the cluster centers are modified and membership functions are also updated; (2) a weighted recursive least squares estimator is used to optimize the parameters of the linear functions in the Takagi-Sugeno type fuzzy rules. Testing datasets consisting of actual and simulated data are used to test the proposed method. Three common criteria including mean absolute error (MAE), root mean square error (RMSE), and mean absolute relative error (MARE) are utilized to evaluate the estimation performance. Estimation results demonstrate the accuracy and effectiveness of the EFNN method through comparison with existing methods including: multiple linear regression (MLR), instantaneous model (IM), linear model (LM), neural network (NN), and cumulative plots (CP). [ABSTRACT FROM AUTHOR]