Search

Non-invasive diagnosis on biological liquid samples, such as urine, sweat, saliva, and tears, may allow patients to evaluate their health by themselves. To obtain accurate diagnostic results, target liquid must be precisely sampled. Conventionally, urine sampling using filter paper can be given as an example sampling, but differences in the paper structure can cause variations in sampling volume. This paper describes precise liquid sampling using synthetic microfluidic papers, which are composed of obliquely combined micropillars. Sampling volume accuracy was investigated using different designs and collection methods to determine the optimal design and sample collecting method. The optimized protocol was followed to accurately measure potassium concentration using synthetic microfluidic paper and a commercially available densitometer, which verified the usefulness of the synthetic microfluidic papers for precision sampling.

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively.

Amphimeriasis, a fish-borne zoonotic disease caused by the liver fluke Amphimerus spp., has recently been reported as an emerging disease affecting an indigenous Ameridian group, the Chachi, living in Ecuador. The only method for diagnosing amphimeriasis was the microscopic detection of eggs from the parasite in patients' stool samples with very low sensitivity. Our group developed an ELISA technique for detection of anti-Amphimerus IgG in human sera and a molecular method based on LAMP technology (named LAMPhimerus) for specific and sensitive parasite DNA detection. The LAMPhimerus method showed to be much more sensitive than classical parasitological methods for amphimeriasis diagnosis using human stool samples for analysis. The objective of this work is to demonstrate the feasibility of using dried stool samples on filter paper as source of DNA in combination with the effectiveness of our previously designed LAMPhimerus assay for successfully Amphimerus sp. detection in clinical stool samples. A total of 102 untreated and undiluted stool samples collected from Chachi population were spread as thin layer onto common filter paper for easily transportation to our laboratory and stored at room temperature for one year until DNA extraction. When LAMPhimerus method was applied for Amphimerus sp. DNA detection, a higher number of positive results was detected (61/102; 59.80%) in comparison to parasitological methods (38/102; 37.25%), including 28/61 (45.90%) microscopy-confirmed Amphimerus sp. infections. The diagnostic parameters for the sensitivity and specificity werecalculated for our LAMPhimerus assay, which were 79.17% and 65.98%, respectively. We demonstrate, for the first time, that common filter paper is useful for easy collection and long-term storage of human stool samples for later DNA extraction and molecular analysis of human-parasitic trematode eggs. This simple, economic and easily handling method combined with the specific and sensible LAMPhimerus assay has the potential to beused as an effective molecular large-scale screening test for amphimeriasis-endemic areas.

Humans introduced paper mulberry (Broussonetia papyrifera) from Taiwan into the Pacific over 5000 years ago as a fiber source to make barkcloth textiles that were, and still are, important cultural artifacts throughout the Pacific. We have used B. papyrifera, a species closely associated to humans, as a proxy to understand the human settlement of the Pacific Islands. We report the first genetic analysis of paper mulberry textiles from historical and archaeological contexts (200 to 50 years before present) and compare our results with genetic data obtained from contemporary and herbarium paper mulberry samples. Following stringent ancient DNA protocols, we extracted DNA from 13 barkcloth textiles. We confirmed that the fiber source is paper mulberry in nine of the 13 textiles studied using the nuclear ITS-1 marker and by statistical estimates. We detected high genetic diversity in historical Pacific paper mulberry barkcloth with a set of ten microsatellites, showing new alleles and specific genetic patterns. These genetic signatures allow tracing connections to plants from the Asian homeland, Near and Remote Oceania, establishing links not observed previously (using the same genetic tools) in extant plants or herbaria samples. These results show that historic barkcloth textiles are cultural materials amenable to genetic analysis to reveal human history and that these artifacts may harbor evidence of greater genetic diversity in Pacific B. papyrifera in the past.

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. © 2019 Howison et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

The breakthrough potentials of research papers can be explained by their boundary-spanning qualities. Here, for the first time, we apply the structural variation analysis (SVA) model and its affiliated metrics to investigate the extent to which such qualities characterize a group of Nobel Prize winning papers. We find that these papers share remarkable boundary-spanning traits, marked by exceptional abilities to connect disparate and topically-diverse clusters of research papers. Further, their publications exert structural variations on the scale that significantly alters the betweenness centrality distributions of existing intellectual space. Overall, SVA not only provides a set of leading indicators for describing future Nobel Prize winning papers, but also broadens our understanding of the similar prize-winning properties that may have been overlooked among other regular publications., 27 pages, 8 figures, 9 tables. Submitted to Frontiers in Research Metrics and Analytics

Rocky desertification is a bottleneck that reduces ecological and environmental security in karst areas. Paper mulberry, a unique deciduous tree, shows good performance in rocky desertification areas. Its resistance mechanisms are therefore of high interest. In this study, a lysine acetylation proteomics analysis of paper mulberry seedling leaves was conducted in combination with the purification of acetylated protein by high-precision nano LC-MS/MS. We identified a total of 7130 acetylation sites in 3179 proteins. Analysis of the modified sites showed a predominance of nine motifs. Six positively charged residues: lysine (K), arginine (R), and histidine (H), serine (S), threonine (T), and tyrosine (Y) occurred most frequently at the +1 position, phenylalanine (F) was both detected both upstream and downstream of the acetylated lysines; and the sequence logos showed a strong preference for lysine and arginine around acetylated lysines. Functional annotation revealed that the identified enzymes were mainly involved in translation, transcription, ribosomal structure and biological processes, showing that lysine acetylation can regulate various aspects of primary carbon and nitrogen metabolism and secondary metabolism. Acetylated proteins were enriched in the chloroplast, cytoplasm, and nucleus, and many stress response-related proteins were also discovered to be acetylated, including PAL, HSP70, and ERF. HSP70, an important protein involved in plant abiotic and disease stress responses, was identified in paper mulberry, although it is rarely found in woody plants. This may be further examined in research in other plants and could explain the good adaptation of paper mulberry to the karst environment. However, these hypotheses require further verification. Our data can provide a new starting point for the further analysis of the acetylation function in paper mulberry and other plants.

Bisphenol A (BPA) is an endocrine disrupting chemical used in a wide range of consumer products including photoactive dyes used in thermal paper. Recent studies have shown that dermal absorption of BPA can occur when handling these papers. Yet, regulatory agencies have largely dismissed thermal paper as a major source of BPA exposure. Exposure estimates provided by agencies such as the European Food Safety Authority (EFSA) are based on assumptions about how humans interact with this material, stating that ‘typical’ exposures for adults involve only one handling per day for short periods of time (30% of individuals hold thermal paper with more than three fingertips, and >60% allow the paper to touch their palm. Only 11% of the participants we observed were consistent with the EFSA model for time of contact and dermal surface area. Mathematical modeling based on handling times we measured and previously published transfer coefficients, concentrations of BPA in paper, and absorption factors indicate the most conservative estimated intake from handling thermal paper in this population is 51.1 ng/kg/day, similar to EFSA’s estimates of 59 ng/kg/day from dermal exposures. Less conservative estimates, using published data on concentrations in thermal paper and transfer rates to skin, indicate that exposures are likely significantly higher. Based on our observational data, we propose that the current models for estimating dermal BPA exposures are not consistent with normal human behavior and should be reevaluated.

ObjectivesRecently, the results of two economic evaluations were published both of which seemingly demonstrate the cost-effectiveness of sofosbuvir-based regimens for the treatment of chronic hepatitis C genotype 1 infection in Germany. Both analyses were sponsored by the manufacturer of sofosbuvir and use a different methodology: Whereas one evaluation is based on a conventional cost-utility analysis, the other rests upon the efficiency-frontier method used by the German Institute for Quality and Efficiency in Health Care (IQWiG). The purpose of this study is to reanalysis the results of both economic evaluations in combination.DesignReanalysis of published decision modelling results.SettingPrimary care in Germany.ParticipantsPatients with chronic hepatitis C genotype 1 infection (treatment-naïve and -experienced, cirrhotic and non-cirrhotic).InterventionsSofosbuvir, other anti-hepatitis C virus drugs, and no treatment.Primary and secondary outcome measuresCost per unit of health benefit and cost per quality-adjusted life year.ResultsReanalysis of the results of both economic evaluations in combination reveals an unclear rationale for choosing the selected cost-effectiveness methods as well as a potential publication bias, favoring the product of the manufacturer. Based on the reanalysis, sofosbuvir is not cost-effective in treatment-experienced non-cirrhotic patients, potentially lacks cost-effectiveness in treatment-experienced cirrhotic patients, and is only partially cost-effective in treatment-naïve non-cirrhotic patients. Taken together, these results indicate a lack of cost-effectiveness in three quarters of the German patient population.ConclusionsTwo economic evaluations on sofosbuvir suggest, in combination, that sofosbuvir cannot be considered a cost-effective treatment in three quarters of the German patient population.

In our planned study, we shall empirically study the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether citation decisions are (mainly) driven by the quality of cited references. The design of our study is oriented towards the study by Teplitskiy, Duede [10]. We shall undertake a survey of corresponding authors with an available email address in the Web of Science database. The authors are asked to assess the quality of papers that they cited in previous papers. Some authors will be assigned to three treatment groups that receive further information alongside the cited paper: citation information, information on the publishing journal (journal impact factor), or a numerical access code to enter the survey. The control group will not receive any further numerical information. In the statistical analyses, we estimate how (strongly) the quality assessments of the cited papers are adjusted by the respondents to the anchor value (citation, journal, or access code). Thus, we are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation or journal), but also by numbers that are not related to quality, i.e. the access code. The results of the study may have important implications for quality assessments of papers by researchers and the role of numbers, citations, and journal metrics in assessment processes.

The success of a scientist depends on their production of scientific papers and the impact factor of the journal in which they publish. Because most major scientific journals are published in English, success is related to publishing in this language. Currently, 98% of publications in science are written in English, including researchers from English as a Foreign Language (EFL) countries. Colombia is among the countries with the lowest English proficiency in the world. Thus, understanding the disadvantages that Colombians face in publishing is crucial to reducing global inequality in science. This paper quantifies the disadvantages that result from the language hegemony in scientific publishing by examining the additional costs that communicating in English creates in the production of articles. It was identified that more than 90% of the scientific articles published by Colombian researchers are in English, and that publishing in a second language creates additional financial costs to Colombian doctoral students and results in problems with reading comprehension, writing ease and time, and anxiety. Rejection or revision of their articles because of the English grammar was reported by 43.5% of the doctoral students, and 33% elected not to attend international conferences and meetings due to the mandatory use of English in oral presentations. Finally, among the translation/editing services reviewed, the cost per article is between one-quarter and one-half of a doctoral monthly salary in Colombia. Of particular note, we identified a positive correlation between English proficiency and higher socioeconomic origin of the researcher. Overall, this study exhibits the negative consequences of hegemony of English that preserves the global gap in science. Although having a common language is important for science communication, generating multilinguistic alternatives would promote diversity while conserving a communication channel. Such an effort should come from different actors and should not fall solely on EFL researchers.

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming.

Objective To survey the knowledge, attitude, and practices of Vietnamese pharmacists regarding the COVID-19 pandemic. Method This cross-sectional, paper-based study was conducted from June to August 2020. A validated questionnaire (Cronbach’s alpha = 0.84) was used to interview 1,023 pharmacists in nine provinces of Vietnam. Analysis of covariance was employed to identify factors associated with the knowledge of pharmacists. The best model was chosen by using the Bayesian Model Averaging method in R software version 4.0.4. Results The mean knowledge score was 12.02 ± 1.64 (range: 6–15), which indicated that 93.4% of pharmacists had good knowledge of COVID-19. There was no difference in the average score between males and females (p > 0.05). The multivariate linear regression model revealed that the knowledge was significantly associated with pharmacists’ age, education level, and residence (p < 0.001). About attitude and practices, pharmacists daily sought and updated information on the COVID-19 pandemic through mass media and the internet (social network and online newspapers). Nearly 48% of them conceded that they communicated with customers when at least one person did not wear a face mask at the time of the COVID-19 outbreak. At medicine outlets, many measures were applied to protect pharmacists and customers, such as equipping pharmacists with face masks and hand sanitizers (95.0%), using glass shields (83.0%), and maintaining at least one-meter distance between two people (85.2%). Conclusion The pharmacists’ knowledge of COVID-19 transmission, symptoms, and prevention was good. Many useful measures against the spread of this perilous virus were applied in medicine outlets. However, pharmacists should restrict forgetting to wear face masks in communication with medicine purchasers. The government and health agencies should have practical remedies to reduce the significant differences in the COVID-19 knowledge of pharmacists among provinces and education-level groups.

Before organizing mixed-mode data collection for the self-administered questionnaire of the Belgian Health Interview Survey, measurement effects between the paper-and-pencil and the web-based questionnaire were evaluated. A two-period cross-over study was organized with a sample of 149 employees of two Belgian research institutes (age range 22-62 years, 72% female). Measurement agreement was assessed for a diverse range of health indicators related to general health, mental and psychosocial health, health behaviors and prevention with kappa coefficients and intraclass correlation (ICC). The quality of the data collected by both modes was evaluated by quantifying the missing, 'don't know' and inconsistent values and data entry mistakes. Good to very good agreement was found for all categorical indicators with kappa coefficients superior to 0.60, except for two mental and psychosocial health indicators namely the presence of a sleeping disorder and of a depressive disorder (kappa≥0.50). For the continuous indicators high to acceptable agreement was observed with ICC superior to 0.70. Inconsistent answers and data-entry mistakes were only occurring in the paper-and-pencil mode. There were no less missing values in the web-based mode compared to the paper-and-pencil mode. The study supports the idea that web-based modes provide, in general, equal responses to paper-and-pencil modes. However, health indicators based upon factual and objective items tend to have higher measurement agreement than indicators requiring an assessment of personal subjective feelings. A web-based mode greatly facilitates the data-entry process and guides the completing of a questionnaire. However, item non-response was not positively affected. ispartof: PLOS ONE vol:13 issue:5 ispartof: location:United States status: published

PurposeThe aim of this experimental study was to investigate whether paper-and-pencil and computerized surveys administered in the school setting yield equivalent data quality indicators and risk behavior prevalence estimates.MethodsData were drawn from the European School Survey Project on Alcohol and Other Drugs (ESPAD®) carried out in Italy to monitor drug, alcohol, tobacco use and other risk-behaviors among Italian high school students aged 15-19 years. A sub-sample of schools was recruited for the study (1673 pupils). For each school, two entire randomly selected courses (from the first to the fifth grade) participated and were assigned randomly to the self-administered paper-and-pencil (N = 811) or computerized survey (N = 862). Differences in data quality were assessed using the following indicators: questionnaire completeness (missing gender and/or 50% of missing answers) and internal consistency (repetitive extreme response patterns). Separate logistic regression models were used to estimate the mode effect on the reporting of each risk behavior, controlling for gender and age. Finally, the prevalence estimates of the experimental study were compared to the results of the national ESPAD® study.ResultsThe computerized administration mode produced a higher proportion of invalid questionnaires, but the prevalence estimates generated from responses to the paper-and-pencil and computerized surveys were generally equivalent. Nevertheless, comparing these results with those of the national ESPAD® study, some differences in the prevalence rates were found.ConclusionsThe findings suggest that in a proctored school setting, the computerized survey mode yields almost the same results as the paper-and-pencil mode. However, because of the reliance on existing informatics facilities until when all schools in the country will be sufficiently equipped for the computerized data collection, they should be given the opportunity to choose between paper-and-pencil and computerized survey modes, in order to avoid a possible selection bias.

We propose to use Twitter data as social-spatial sensors. This study deals with the question whether research papers on certain diseases are perceived by people in regions (worldwide) that are especially concerned by these diseases. Since (some) Twitter data contain location information, it is possible to spatially map the activity of Twitter users referring to certain papers (e.g., dealing with tuberculosis). The resulting maps reveal whether heavy activity on Twitter is correlated with large numbers of people having certain diseases. In this study, we focus on tuberculosis, human immunodeficiency virus (HIV), and malaria, since the World Health Organization ranks these diseases as the top three causes of death worldwide by a single infectious agent. The results of the social-spatial Twitter maps (and additionally performed regression models) reveal the usefulness of the proposed sensor approach. One receives an impression of how research papers on the diseases have been perceived by people in regions that are especially concerned by these diseases. Our study demonstrates a promising approach for using Twitter data for research evaluation purposes beyond simple counting of tweets.

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of 'superfolder' green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 mug/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens.

Type 1 diabetes (T1D) is increasing in incidence and predictable with measurement of serum islet autoantibodies (iAb) years prior to clinical disease onset. Identifying iAb positive individuals reduces diabetic ketoacidosis and identifies individuals for T1D prevention trials. However, large scale screening for iAb remains challenging as assays have varying sensitivities and specificities, insulin autoantibodies remain difficult to measure and venipuncture is generally required to obtain serum. We developed an approach to reliably measure all four major iAb, including insulin autoantibodies, from dried blood spots (DBS) on filter-paper. By spiking iAb positive serum into iAb negative whole blood in a dose titration, we optimized the conditions for autoantibody elution from filter paper as measured by fluid phase radioimmunoassays. After assessing stability of measuring iAb from DBS over time, we then screened iAb from DBS and the corresponding serum in new-onset T1D (n = 52), and controls (n = 72) which included first-degree relatives of T1D patients. iAb measured from eluted DBS in new-onset T1D strongly correlated with serum measurements (R2 = 0.96 for mIAA, GADA = 0.94, IA-2A = 0.85, ZnT8A = 0.82, p

Background Paper mulberry (Broussonetia papyrifera (L.) L'Hér. ex Vent) is a dioecious tree native to East Asia and mainland Southeast-Asia, introduced prehistorically to Polynesia as a source of bark fiber by Austronesian-speaking voyagers. In Oceania, trees are coppiced and harvested for production of bark-cloth, so flowering is generally unknown. A survey of botanical records of paper mulberry revealed a distributional disjunction: the tree is apparently absent in Borneo and the Philippines. A subsequent study of chloroplast haplotypes linked paper mulberry of Remote Oceania directly to a population in southern Taiwan, distinct from known populations in mainland Southeast-Asia. Methodology We describe the optimization and use of a DNA marker designed to identify sex in paper mulberry. We used this marker to determine the sex distribution in selected localities across Asia, Near and Remote Oceania. We also characterized all samples using the ribosomal internal transcribed spacer sequence (ITS) in order to relate results to a previous survey of ITS diversity. Results In Near and Remote Oceania, contemporary paper mulberry plants are all female with the exception of Hawaii, where plants of both sexes are found. In its natural range in Asia, male and female plants are found, as expected. Male plants in Hawaii display an East Asian ITS genotype, consistent with modern introduction, while females in Remote Oceania share a distinctive variant. Conclusions Most paper mulberry plants now present in the Pacific appear to be descended from female clones introduced prehistorically. In Hawaii, the presence of male and female plants is thought to reflect a dual origin, one a prehistoric female introduction and the other a modern male introduction by Japanese/Chinese immigrants. If only female clones were dispersed from a source-region in Taiwan, this may explain the absence of botanical records and breeding populations in the Philippines and Borneo, and Remote Oceania.

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery.

Made available in DSpace on 2018-11-29T09:28:12Z (GMT). No. of bitstreams: 0 Previous issue date: 2018-03-14 Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Swarm-founding wasps are endemic and common representatives of neotropical fauna and compose an interesting social tribe of vespids, presenting both complex social characteristics and uncommon traits for a eusocial group, such as the absence of castes with distinct morphology. The paper wasp Protonectarina sylveirae (Saussure) presents a broad distribution from Brazil, Argentina and Paraguay, occurring widespread in the Atlantic rainforest and arboreal Caatinga, being absent in the Amazon region. Given the peculiar distribution among swarm-founding wasps, an integrative approach to reconstruct the evolutionary history of P. sylveirae in a spatial-temporal framework was performed to investigate: the presence of genetic structure and its relationship with the geography, the evolution of distinct morphologic lineages and the possible historical event(s) in Neotropical region, which could explain the observed phylogeographic pattern. Individuals of P. sylveirae were obtained from populations of 16 areas throughout its distribution for DNA extraction and amplification of mitochondrial genes 12S, 16S and COI. Analysis of genetic diversity, construction of haplotype net, analysis of population structure and dating analysis of divergence time were performed. A morphometric analysis was also performed using 8 measures of the body of the adult (workers) to test if there are morphological distinction among populations. Thirty-five haplotypes were identified, most of them exclusively of a group and a high population structure was found. The possibility of genetic divergence because of isolation by distance was rejected. Morphological analysis pointed to a great uniformity in phenotypes, with only a small degree of differentiation between populations of south and the remaining. Divergence time analysis showed a Middle/Late Miocene origin, a period where an extensive marine ingression occurred in South America. Divergence of haplogroups began from the Plio/Pleistocene boundary and the last glacial maximum most likely modeled the current distribution of species, even though it was not the cause of genetic breaks. Univ Estadual Paulista, Inst Biociencias Letras & Ciencias Exatas, Dept Zool & Bot, Sao Paulo, Brazil Univ Estadual Paulista, Fac Ciencias Agr & Vet, Dept Biol Aplicada Agr, Sao Paulo, Brazil Univ Estadual Paulista, Inst Biociencias Letras & Ciencias Exatas, Dept Zool & Bot, Sao Paulo, Brazil Univ Estadual Paulista, Fac Ciencias Agr & Vet, Dept Biol Aplicada Agr, Sao Paulo, Brazil CNPq: CNPq - 472403/2013-3 FAPESP: 2012/13886-4

It is important to implement detection and assessment of plant diseases based on remotely sensed data for disease monitoring and control. Hyperspectral data of healthy leaves, leaves in incubation period and leaves in diseased period of wheat stripe rust and wheat leaf rust were collected under in-field conditions using a black-paper-based measuring method developed in this study. After data preprocessing, the models to identify the diseases were built using distinguished partial least squares (DPLS) and support vector machine (SVM), and the disease severity inversion models of stripe rust and the disease severity inversion models of leaf rust were built using quantitative partial least squares (QPLS) and support vector regression (SVR). All the models were validated by using leave-one-out cross validation and external validation. The diseases could be discriminated using both distinguished partial least squares and support vector machine with the accuracies of more than 99%. For each wheat rust, disease severity levels were accurately retrieved using both the optimal QPLS models and the optimal SVR models with the coefficients of determination (R2) of more than 0.90 and the root mean square errors (RMSE) of less than 0.15. The results demonstrated that identification and severity evaluation of stripe rust and leaf rust at the leaf level could be implemented based on the hyperspectral data acquired using the developed method. A scientific basis was provided for implementing disease monitoring by using aerial and space remote sensing technologies.

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability.

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education.

BACKGROUND: Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA) which independently analyzes the raw data and reports the results on its website.OBJECTIVES: This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis.METHODS: Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy) and withdrawal due to adverse events (safety). As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report), followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy.RESULTS: FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34) except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61) pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55) pairwise comparisons and were statistically significant in 5. The "signal" in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical.CONCLUSION: There was no empirical evidence to suggest biased estimates between the two sources. Increased and detailed transparency in publications would improve the understanding and credibility of published results. Further, the FDA report was found to be a useful source when data are missing in the published report (i.e. reporting bias).

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors' collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews.

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field., SCOPUS: ar.j, info:eu-repo/semantics/published

Environmental DNA (eDNA) analysis has gained traction as a precise and cost-effective method for species and waterways management. To date, publications on eDNA protocol optimization have focused primarily on DNA yield. Therefore, it has not been possible to evaluate the cost and speed of specific components of the eDNA protocol, such as water filtration and DNA extraction method when designing or choosing an eDNA protocol. At the same time, these two parameters are essential for the experimental design of a project. Here we evaluate and rank 27 different eDNA protocols in the context of Chinook salmon (Oncorhynchus tshawytscha) eDNA detection in an estuarine environment. We present a comprehensive evaluation of multiple eDNA protocol parameters, balancing time, cost and DNA yield. We collected samples composed of 500 mL estuarine water from Deverton Slough (38°11'16.7"N 121°58'34.5"W) and 500 mL from tank water containing 1.3 juvenile Chinook Salmon per liter. Then, we compared extraction methods, filter types, use of inhibitor removal kit for DNA yield, processing time, and protocol cost. Lastly, we used an MCMC algorithm together with machine learning to understand the DNA yield of each step of the protocol as well as the interactions between those steps. Glass fiber filtration was to be the most resilient to high turbidites, filtering the samples in 2.32 ± 0.08 min instead of 14.16 ± 1.86 min and 6.72 ± 1.99 min for nitrocellulose and paper filter N1, respectively. The filtration DNA yield percentages for paper filter N1, glass fiber, and nitrocellulose were 0.00045 ± 0.00013, 0.00107 ± 0.00013, 0.00172 ± 0.00013. The DNA extraction yield percentage for QIagen, dipstick, NaOH, magnetic beads, and direct dipstick ranged from 0.047 ± 0.0388 to 0.475 ± 0.0357. For estuarine waters, which are challenging for eDNA studies due to high turbidity, variable salinity, and the presence of PCR inhibitors, we found that a protocol combining glass filters, magnetic beads, and an extra step for PCR inhibitor removal, is the method that best balances time, cost, and yield. In addition, we provide a generalized decision tree for determining the optimal eDNA protocol for other studies in aquatic systems. Our findings should be applicable to most aquatic environments and provide a clear guide for determining which eDNA protocol should be used under different study constraints.

Many microbial phenotypes are differentially or exclusively expressed on agar surfaces, including biofilms, motility, and sociality. However, agar-based assays are limited by their low throughput, which increases costs, lab waste, space requirements, and the time required to conduct experiments. Here, we demonstrate the use of wax-printed microfluidic paper-based analytical devices (μPADs) to measure linear growth rate of microbes on an agar growth media as a means of circumventing the aforementioned limitations. The main production materials of the proposed μPAD design are a wax printer, filter paper, and empty pipet boxes. A single wax-printed μPAD allowing 8 independent, agar-grown colonies costs $0.07, compared to $0.20 and $9.37 for the same number of replicates on traditional microtiter/spectrophotometry and Petri dish assays, respectively. We optimized the μPAD design for channel width (3 mm), agar volume (780 μL/channel), and microbe inoculation method (razor-blade). Comparative analyses of the traditional and proposed μPAD methods for measuring growth rate of nonmotile (Saccharomyces cerevisiae) and motile (flagellated Escherichia coli) microorganisms suggested the μPAD assays conferred a comparable degree of accuracy and reliability to growth rate measurements as their traditional counterparts. We substantiated this claim with strong, positive correlations between the traditional and μPAD assay, a significant nonzero slope in the model relating the two assays, a nonsignificant difference between the relative standard errors of the two techniques, and an analysis of inter-device reliability. Therefore, μPAD designs merit consideration for the development of enhanced-throughput, low-cost microbial growth and motility assays.

In accordance with the opinion of the World Health Organization and the World Water Council the development of effective technologies for the treatment of wastewater from heavy metals for their discharge into water bodies or reuse is an urgent task nowadays. Phytoremediation biotechnologies is the most environmentally friendly and cheapest way of the treatment of wastewater, suitable for sustainable development principals. The main disadvantage of the phytoremediation is the slow speed of the process. A method for accelerating the process of phytoremediation by the combined effect of magnetic and weak electric fields is proposed. The purpose of this study is to determine the values of the parameters of the magnetic and weak electric fields that are most suitable for extracting cuprum ions from wastewater using the higher aqua plants (Lemna minor). A corresponding technological process based on the results of the study is proposed. The results have shown that the removal of copper cations from sulfate solutions effectively occurs in the initial period of time (1–5 hours) under the influence of a magnetic field with an intensity of H = 2 kA/m. Under the combined influence of an electrical current with density j = 240 μA/cm2 and a magnetic field (H = 2 kA/m) the highest rate of copper extraction by duckweed leaves is achieved. Under these conditions, the greatest growth and development of plant leaves occurs. The paper presents the results of determining of the parameters of the electrochemical release from the eluate of the spent phytomass of duckweed. It has been determined that the release of metal occurs at E = 0.32 V. An original scheme for wastewater treatment from copper with subsequent separation of copper from the spent phytomass of duckweed is proposed. In general, the presented results are a scientific justification of wastewater treatment technologies and a contribution to resolving the crisis in the field of fresh water supply. An important contribution in the circular economy is a technology recommendation proposed for recovering copper from duckweed after wastewater treatment.

Fiber release during domestic textile washing is a cause of marine microplastic pollution, but better understanding of the magnitude of the issue and role of fabric care products, appliances and washing cycles is needed. Soiled consumer wash loads from U.K. households were found to release a mean of 114 ± 66.8 ppm (mg microfiber per kg fabric) (n = 79) fibers during typical washing conditions and these were mainly composed of natural fibers. Microfiber release decreased with increasing wash load size and hence decreasing water to fabric ratio, with mean microfiber release from wash loads in the mass range 1.0-3.5 kg (n = 57) found to be 132.4 ± 68.6 ppm, significantly (p = 3.3 x 10-8) higher than the 66.3 ± 27.0 ppm of those in the 3.5-6.0 kg range (n = 22). In further tests with similar soiled consumer wash loads, moving to colder and quicker washing cycles (i.e. 15°C for 30 mins, as opposed to 40°C for 85 mins) significantly reduced microfiber generation by 30% (p = 0.036) and reduced whiteness loss by 42% (p = 0.000) through reduced dye transfer and soil re-deposition, compared to conventional 40°C cycles. In multicycle technical testing, detergent pods were selected for investigation and found to have no impact on microfiber release compared to washing in water alone. Fabric softeners were also found to have no direct impact on microfiber release in testing under both European and North American washing conditions. Extended testing of polyester fleece garments up to a 48-wash cycle history under European conditions found that microfiber release significantly reduced to a consistent low level of 28.7 ± 10.9 ppm from eight through 64 washes. Emerging North American High-Efficiency top-loading washing machines generated significantly lower microfiber release than traditional top-loading machines, likely due to their lower water fill volumes and hence lower water to fabric ratio, with a 69.7% reduction observed for polyester fleece (n = 32, p = 7.9 x 10-6) and 37.4% reduction for polyester T-shirt (n = 32, p = 0.0032). These results conclude that consumers can directly reduce the levels of microfibers generated per wash during domestic textile washing by using colder and quicker wash cycles, washing complete (but not overfilled) loads, and (in North America) converting to High-Efficiency washing machines. Moving to colder and quicker cycles will also indirectly reduce microfiber release by extending the lifetime of clothing, leading to fewer new garments being purchased and hence lower incidence of the high microfiber release occurring during the first few washes of a new item.

The objective of this study is to verify the feasibility of using biochar made from crop straw as a bitumen additive to improve some properties of bitumen. The differences between crop straw biochar prepared in a laboratory and commercial charcoal were investigated through scanning electron microscopy and laser particle size analyses. Furthermore, biochar-modified asphalt was prepared using the high-speed shear method, and the penetration, softening point, ductility at 15°C, and apparent viscosity of the asphalt binder with 6% biochar were measured at 120, 135, 150, 160, and 175°C. It was found that both the crop straw biochar and the commercial charcoal consist mainly of C, O, Si, and K, but the C content of crop straw biochar is slightly higher than that of commercial charcoal. The particle size of biochar is smaller than that of commercial charcoal, while the specific surface area is larger. It was determined that the addition of crop straw biochar significantly improved the high-temperature performance of asphalt, and that biochar and commercial charcoal have a similar influence on the high temperature performance of asphalt.

Passiflora quadrangularis L. belongs to the family Passifloraceae which bears larger fruit with edible juicy mesocarp and pulp known as a good source of phytochemicals. Cultivation and plant management practices are known to influence the phytochemical compositions of agricultural produce. This study aimed to examine the influence of the cultivation practices on the antioxidant activities and secondary metabolites of the organically and conventionally grown P. quadrangularis. Findings revealed organically treated P. quadrangularis plants showed enhancement in their antioxidant properties and secondary metabolites profiles. Among the plant parts, leaves of P. quadrangularis grown organically possessed higher antioxidant activities compared to the conventional in all assays evaluated. The antioxidant activities in the edible parts of the P. quadrangularis fruit have also been enhanced through organic cultivation with significantly higher total phenolic content and DPPH in mesocarp, and the pulp showed higher total flavonoid content, DPPH and FRAP. This observation is supported by a higher level of vitamins and secondary metabolites in the samples. The secondary metabolites profile showed mesocarps were phenolic rich, the pulps were flavonoids rich while leaves showed good composition of phenolics, flavonoids and terpenoids with outstanding antioxidant activities. The common secondary metabolites for organically produced P. quadrangularis in different plant parts include 2-isopropyl-3-methoxycinnamic acid (mesocarp and pulp), myricetin isomers (pulp and leaves), and malvidin-3-O-arabinoside isomers (pulp and leaves). This study confirmed that organic cultivated P. quadrangularis possessed higher antioxidant activities contributed by its vitamins and secondary metabolites.

Concentrating fruit juices by freezing supports the maintenance of both nutrients and flavors. Development of the freezing concentration process has introduced equipment such as centrifuge or block freezing systems, which are suitable for large-scale commercial processing. However, the necessary characteristics of freeze concentration methods for juices include simplicity and low cost. This study examined the effects of different container shapes on the processes of freezing and melting. The shape of the container was found to be more important than the melting temperature, across a relatively large scale. Furthermore, the nutrient procyanidin B2 and saccharides were concentrated. The methods concentrated juice components under low cost conditions without complex equipment. This research thus not only offers benefits for commercial juice preparation but also provides new insight into effects of shape differences in concentration technologies.

Globally, the economic losses due to hard ticks infestation and the control of the associated diseases have been calculated at USD $13.9–18.7 billion per year. The economic impact is related to its direct damage to the skins, blood loss, anemia, severe immunological reactions and indirect losses that related to the effects of hemoparasites, cost of treatment for clinical cases and expenses incurred in the control of ticks. The current study evaluated the acaricidal activities of fennel Foeniculum vulgare essential oil and its main components; trans-anethole and fenchone; against R. annulatus. GC–MS analysis revealed that this oil contained 16 components representing 99.9% of the total identified compounds with E-anethole being the predominant component(64.29%), followed by fenchone (9.94%). The fennel oil and trans-anethole showed significant acaricidal activities. The LC50 of the fennel oil was attained at concentrations of 12.96% for adult ticks and 1.75% for tick larvae meanwhile the LC50 of trans-anethole was reached at concentrations of 2.36% for adult tick and 0.56% for tick larvae. On the contrary, fenchone showed no any significant adulticidal activities and its LC50 attained at a concentration of 9.11% for tick larvae. Regarding repellence activities, trans-anethole achieved 100% repellency at the concentration of 10% while fennel showed 86% repellency at the same concentration. Fenchone showed no repellency effect. Treatment of larvae with fennel, trans-anethole, and fenchone LC50 concentrations significantly inhibited the acetylcholinesterase activity. Meanwhile, glutathione s-transferase activity was significantly decreased in fennel treated larvae but no significant effect was found in the larvae of trans-anethole and fenchone groups. These results indicate that the acaricide effect of fennel oil may attributed to its high content of trans-anethole. This was supported by potent adulticidal, larvicidal, and repellency effects of trans-anethole against Rhipeciphalus annulatus tick and therefore it could be included in the list of acaricide of plant origin.

A synthetic microbial consortium called Effective Microorganisms (EM) consists mainly of photosynthetic bacteria, lactic acid bacteria and yeast. Various effects of EM∙XGOLD, a health drink produced by EM, on life cycle of Dictyostelium discoideum were described previously. Here, we report our attempt to identify the active principle, termed EMF, that brought about the observed effects. Throughout the purification processes, the presence of the active principle was monitored by promoted fruiting body formation. By liquid-liquid separation the activity was recovered in aqueous phase, which, after concentration, was further subjected to reverse-phase column chromatography. No activity was detected in any eluant, while almost all the activity was recovered in residual insoluble material. The application of conventional organic chemistry procedures to the residual fraction did not lead to any informative results. Acid treatment of the insoluble material produced air bubbles, suggesting it to be composed of some inorganic carbonate. Viewed under scanning electronmicroscope, the residue revealed spherical particles of μm size range. Energy Dispersive X-ray (EDX) Spectroscopy pointed to the existence, on the surface of the particles, of magnesium and, to a certain extent, of potassium. In separate experiments, acid treatment and alkali neutralization of EM∙XGOLD completely wiped out the stimulatory activity of fruiting body formation. These lines of evidence indicate these Mg, K-containing microparticles to be an active principle of EM culture extract. How these particles exert their effect is currently under intensive investigation.

Annually, agricultural activity produces an enormous amount of plant biomass by-product. Many studies have reported the biomethane potential of agro-industrial wastes, but only a few studies have investigated applying the substrates in both batch and continuous mode. Tomato is one of the most popular vegetables globally; its processing releases a substantial amount of by-product, such as stems and leaves. This study examined the BMP of tomato plant (Solanum lycopersicum Mill. L. cv. Alfred) waste. A comparative test revealed that the BMPs of corn stover, tomato waste,and their combination were approximately the same, around 280 mL methane/g Volatile Solid. In contrast, the relative biogas production decreased in the presence of tomato waste in a continuous mesophilic anaerobic digestion system; the daily biogas productions were 860 ± 80, 290 ± 50, and 570 ± 70 mL biogas/gVolatile Solid/day in the case of corn stover, tomato waste, and their mixture, respectively. The methane content of biogas was around 46–48%. The fermentation parameters of the continuous AD experiments were optimal in all cases; thus, TW might have an inhibitory effect on the microbial community. Tomato plant materials contain e.g. flavonoids, glycoalkaloids (such as tomatine and tomatidine), etc. known as antimicrobial and antifungal agents. The negative effect of tomatine on the biogas yield was confirmed in batch fermentation experiments. Metagenomic analysis revealed that the tomato plant waste caused significant rearrangements in the microbial communities in the continuously operated reactors. The results demonstrated that tomato waste could be a good mono-substrate in batch fermentations or a co-substrate with corn stover in a proper ratio in continuous anaerobic fermentations for biogas production. These results also point to the importance of running long-term continuous fermentations to test the suitability of a novel biomass substrate for industrial biogas production.

Despite the development of effective vaccines against SARS-CoV-2, epidemiological control of the virus is still challenging due to slow vaccine rollouts, incomplete vaccine protection to current and emerging variants, and unwillingness to get vaccinated. Therefore, frequent testing of individuals to identify early SARS-CoV-2 infections, contact-tracing and isolation strategies remain crucial to mitigate viral spread. Here, we describe WHotLAMP, a rapid molecular test to detect SARS-CoV-2 in saliva. WHotLAMP is simple to use, highly sensitive (3.6 viral RNA copies per microliter of saliva) and specific, as well as inexpensive, making it ideal for frequent screening. Moreover, WHotLAMP does not require toxic chemicals or specialized equipment and thus can be performed in point-of-care settings, and may also be adapted for resource-limited environments or home use. While applied here to SARS-CoV-2, WHotLAMP can be modified to detect other pathogens, making it adaptable for other diagnostic assays, including for use in future outbreaks.

Since the innovation of our new half-piece elastometric respirator, this type of filtering facepiece respirator (FFR) has been used widely in Thailand. Decontamination methods including ultraviolet C (UVC) germicidal irradiation and 70% alcohol have been implemented to decontaminate these respirators. We then examined the inactivation potential of different decontamination processes on porcine epidemic diarrhea virus (PEDV) and numerous bacterial strains, most of which were skin-derived. To enable rigorous integrity of the masks after repeated decontamination processes, fit tests by the Bitrex test, tensile strength and elongation at break were also evaluated. Our results showed that UVC irradiation at a dose of 3 J/cm2 can eradicate bacteria after 60 min and viruses after 10 min. No fungi were found on the mask surface before decontamination. The good fit test results, tensile strength and elongation at break were still maintained after multiple cycles of decontamination. No evidence of physical degradation was found by gross visual inspection. Alcohol (70%) is also an easy and effective way to eradicate microorganisms on respirators. As the current pandemic is expected to continue for months to years, the need to supply adequate reserves of personnel protective equipment (PPE) and develop effective PPE reprocessing methods is crucial. Our studies demonstrated that the novel silicone mask can be safely reprocessed and decontaminated for many cycles by UVC irradiation, which will help ameliorate the shortage of important protective devices in the COVID-19 pandemic era.

Determining the distribution of the Yangtze finless porpoise (Neophocaena asiaeorientalis asiaeorientalis, YFP) in the Yangtze River has to date relied on traditional visual and counting methods, but such field surveys are time-consuming and expensive. Analyses using environmental DNA (eDNA) to investigate the presence and range of endangered aquatic species have proven to be more economical and effective detection methods, and are a non-invasive approach to sampling. A challenge of relying on eDNA for YFP monitoring is that the Yangtze River is characterized by high turbidity and a strong current. Here, we used an eDNA-based approach to estimate the presence of YFP at 18 sites in the Yangtze River in August 2017 and at an additional 11 sites in January 2018. At each sampling site, we filtered six 1 L water samples with 5 µm pore size filter paper and quantified the amount of YFP eDNA in each water sample using quantitative real-time polymerase chain reaction (qPCR). In addition, YFP eDNA was successfully detected in locations where we visually observed YFP, as well as in locations where YFP were not observed directly. We found that our eDNA-based method had higher detection rates than traditional field survey methods. Although YFP was visually observed in the Yangtze River in winter, water samples collected during the summer contained significantly higher YFP eDNA than winter water samples. Our results demonstrate the potential effectiveness of eDNA detection methods in determining the distribution of YFP in the Yangtze River.

In response to the recent development of ear corn feeding systems and the shortage of bulking agents for manure composting in the Hokkaido region, the plausibility of using corn stover (a residue of ear corn harvesting) as an alternative bulking agent for dairy manure composting was tested. The temperature profile, quality of the final product, and greenhouse gas emissions were evaluated and compared with the values obtained from manure that used wheat straw, a typical bulking agent. A sufficiently high temperature profile (>70°C) and active organic matter degradation were achieved by mixing in corn stover. After active organic matter degradation for 8 weeks, CO2 production was significantly lower and the stable final products were obtained. The total solids level increased significantly, to 48.8–50.4%, while the C/N ratio dropped significantly, from 19.9–21.8 to 11.2–12.8. Methane emission from the corn-stover-based pile was 0.36% of initial volatile solids, while nitrous oxide emission was 0.58% of initial N, proving that the use of corn stover can mitigate greenhouse gas emission and that its mitigating effect was comparable to those of other bulking agents. Together, the results showed that the use of corn stover can be a suitable alternative bulking agent for dairy manure composting and can serve as part of an ecologically friendly and “circular” method of dairy farming.

The pre-aerobic process of coking wastewater treatment has strong capacity of decarbonization and detoxification, which contribute to the subsequent dinitrogen of non-carbon source/heterotrophic denitrification. The COD removal rate can reach > 90% in the first aerobic bioreactor of the novel O/H/O coking wastewater treatment system during long-term operation. The physico-chemical characteristics of influent and effluent coking wastewater in the first aerobic bioreactor were analyzed to examine how they correlated with bacterial communities. The diversity of the activated sludge microbial community was investigated using a culture-independent molecular approach. The microbial community functional profiling and detailed pathways were predicted from the 16S rRNA gene-sequencing data by the PICRUSt software and the KEGG database. High-throughput MiSeq sequencing results revealed a distinct microbial composition in the activated sludge of the first aerobic bioreactor of the O/H/O system. Proteobacteria, Bacteroidetes, and Chlorobi were the decarbonization and detoxification dominant phyla with the relative abundance of 84.07 ± 5.45, 10.89 ± 6.31, and 2.96 ± 1.12%, respectively. Thiobacillus, Rhodoplanes, Lysobacter, and Leucobacter were the potential major genera involved in the crucial functional pathways related to the degradation of phenols, cyanide, benzoate, and naphthalene. These results indicated that the comprehensive understanding of the structure and function diversity of the microbial community in the bioreactor will be conducive to the optimal coking wastewater treatment.

Samples of bleached kraft pine cellulosic pulp, either treated with an enzyme preparation (a Thermomyces lanuginosus xylanase, an Aspergillus sp. cellulase, and a multienzyme preparation NS-22086 containing both these activities) or untreated, were refined in a laboratory PFI mill. The treatment with cellulases contained in the last two preparations significantly improved the pulp’s susceptibility to refining (the target freeness value of 30°SR was achieved in a significantly shorter time), increased water retention value (WRV) and fines contents while the weighted average fiber length was significantly reduced. These changes of pulp parameters caused deterioration of paper strength properties. The treatment with the xylanase, which partially hydrolyzed xylan, small amounts of which are associated with cellulose fibers, only slightly loosened the structure of fibers. These subtle changes positively affected the susceptibility of the pulp to refining (refining energy was significantly reduced) and improved the static strength properties of paper. Thus, the treatment of kraft pulps with xylanases may lead to substantial savings of refining energy without negative effects on paper characteristics.

In recent years, spread of invasive alien plant species (IAPS) has been a major concern in Nepal. One such IAPS is Ageratum houstonianum, an Asteraceae, that is a prolific seed producer and difficult-to-control in farmland and various ecological regions causing crop yield and biodiversity losses. However, very little information is available on the germination biology and ecology of this species. Therefore, experiments were conducted to assess the effect of water stress, pH level, and light requirement on seed germination, and the effect of seed burial depth on seedling emergence. Water stress was simulated by polyethylene glycol solutions ranging from 0-5.56 MPa and pH solutions ranging from 4 to 9 were prepared using hydrochloric acid and sodium hydroxide. Germination tests were conducted in petri dishes lined with filter paper and placed in a controlled environment chamber set at 20° C. Light requirement comparisons were made by having petri dishes wrapped with aluminum foil or left unwrapped. Seedling emergence was evaluated by placing seeds at depths ranging from 0 to 20 mm in the soil. Results indicated that this species was moderately drought-tolerant because germination ceased beyond 0.51 MPa. Greater germination occurred at neutral to acidic than at alkaline pH levels. The seeds were positively photoblastic because no germination occurred under dark condition. No seedlings emerged from seeds placed more than 2 mm deep in the soil, indicating that this is a primarily surface germinating species. These findings will help predict future invasions and in development of management strategies for this IAPS.

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents.

The response to the COVID-19 epidemic is generating severe shortages of personal protective equipment around the world. In particular, the supply of N95 respirator masks has become severely depleted, with supplies having to be rationed and health care workers having to use masks for prolonged periods in many countries. We sought to test the ability of 7 different decontamination methods: autoclave treatment, ethylene oxide gassing (ETO), low temperature hydrogen peroxide gas plasma (LT-HPGP) treatment, vaporous hydrogen peroxide (VHP) exposure, peracetic acid dry fogging (PAF), ultraviolet C irradiation (UVCI) and moist heat (MH) treatment to decontaminate a variety of different N95 masks following experimental contamination with SARS-CoV-2 or vesicular stomatitis virus as a surrogate. In addition, we sought to determine whether masks would tolerate repeated cycles of decontamination while maintaining structural and functional integrity. All methods except for UVCI were effective in total elimination of viable virus from treated masks. We found that all respirator masks tolerated at least one cycle of all treatment modalities without structural or functional deterioration as assessed by fit testing; filtration efficiency testing results were mostly similar except that a single cycle of LT-HPGP was associated with failures in 3 of 6 masks assessed. VHP, PAF, UVCI, and MH were associated with preserved mask integrity to a minimum of 10 cycles by both fit and filtration testing. A similar result was shown with ethylene oxide gassing to the maximum 3 cycles tested. Pleated, layered non-woven fabric N95 masks retained integrity in fit testing for at least 10 cycles of autoclaving but the molded N95 masks failed after 1 cycle; filtration testing however was intact to 5 cycles for all masks. The successful application of autoclaving for layered, pleated masks may be of particular use to institutions globally due to the virtually universal accessibility of autoclaves in health care settings. Given the ability to modify widely available heating cabinets on hospital wards in well-resourced settings, the application of moist heat may allow local processing of N95 masks.

Honey bees (genusApis)are well known for the impressive suite of nest defenses they have evolved to protect their abundant stockpiles of food and the large colonies they sustain. In Asia, honey bees have evolved under tremendous predatory pressure from social wasps in the genusVespa, the most formidable of which are the giant hornets that attack colonies in groups, kill adult defenders, and prey on brood. We document for the first time an extraordinary collective defense used byApis ceranaagainst the giant hornetVespa soror. In response to attack byV.soror,A.ceranaworkers foraged for and applied spots of animal feces around their nest entrances. Fecal spotting increased after colonies were exposed either to naturally occurring attacks or to chemicals that scout hornets use to target colonies for mass attack. Spotting continued for days after attacks ceased and occurred in response toV.soror, which frequently landed at and chewed on entrances to breach nests, but notVespa velutina, a smaller hornet that rarely landed at entrances. Moderate to heavy fecal spotting suppressed attempts byV.sororto penetrate nests by lowering the incidence of multiple-hornet attacks and substantially reducing the likelihood of them approaching and chewing on entrances. We argue thatA.ceranaforages for animal feces because it has properties that repel this deadly predator from nest entrances, providing the first report of tool use by honey bees and the first evidence that they forage for solids that are not derived from plants. Our study describes a remarkable weapon in the already sophisticated portfolio of defenses that honey bees have evolved in response to the predatory threats they face. It also highlights the strong selective pressure honey bees will encounter if giant hornets, recently detected in western North America, become established.

Vermicomposting has been recommended as an eco-friendly method to transform organic waste into nutrient resources with minimum energy input. However, odor and pest issues associated with this method limit the use of vermicomposting, especially in indoor conditions. This study evaluated the effectiveness of applying hypochlorous acid (HOCl) to deodorize the vermicomposting process and improve the breeding environment for earthworms (Eisenia fetida). The deodorization performance of HOCl was compared by measuring the amount of ammonia (NH3) and amine (R-NH2) released from the decaying process of two types of food waste: HOCl-treated (HTW) waste and non-treated waste (NTW). The total and individual weights of earthworms in the waste treated with HOCl was measured to evaluate the impact on earthworm reproduction after applying HOCl. The results showed that HOCl application could reduce NH3 by 40% and R-NH2 by 80%, and increase the earthworm population size and total weight by up to 29% and 92%, respectively, compared to the control group. These results suggest that HOCl application is potentially an efficient method to control the odor and to boost earthworm reproduction and thus facilitate vermicomposting for improved food waste treatment and environmental quality.

Miscanthus sinensis Andersson is a pioneer plant species that grows naturally at mining sites. Miscanthus sinensis can detoxify aluminium (Al) by producing phytosiderophores, such as chlorogenic acid, citric acid, and malic acid, and localizing Al in cell walls. Root-endophytic Chaetomium cupreum, which produces microbial siderophores, enhances Al tolerance in M. sinensis. However, we could not determine whether the siderophores produced by C. cupreum actually enhance Al tolerance in M. sinensis, because the microbial siderophores have not yet been identified in previous research. The purpose of this study was to clarify how C. cupreum chemically increases Al tolerance in M. sinensis under acidic mining site conditions, especially considering siderophores. Using instrumental analyses, the siderophore produced by C. cupreum was identified as oosporein. Comparison of the stability constant between Al and phytosiderophores and oosporein indicated that oosporein could detoxify Al similarly to chlorogenic acid, which shows higher stability constant than citric acid and malic acid. Inoculation test of C. cupreum onto M. sinensis in acidic mine soil showed that C. cupreum promoted seedling growth, and enhanced Al tolerance via inducing chlorogenic-acid production and producing oosporein. These results suggested that C. cupreum could chemically enhance Al tolerance and might promote growth via reducing excessive Al in cell walls, the main site of Al accumulation. In addition, the chemical enhancement of Al tolerance by C. cupreum might be important for M. sinensis to adapt to acidic mining sites.

There are large amounts of waste activated sludge (WAS) and kitchen waste (KW) produced every year in China. It has been confirmed that anaerobic co-digestion is an effective method to solve this problem. The targets of the present study were optimizing the digestive performances and clearing of the mechanism of bentonite addition by adding bentonite into digestive system. Group M (WAS: KW = 1:2, based on VS) presented higher cumulative methane yield (CMY), where the CMY increased from 19.8 to 36.3 mL/g VS with the bentonite dosage from 0 to 2 g/g VS. After bentonite addition, the lag phase of every digester presented an obvious decrease from 15.1 to 1.4 d. Furthermore, and the moderating effects on microbial community by bentonite. The addition of bentonite improved methane production, and it can also reduce the lag phase of methane production in co-digestion. What's more, bentonite addition increased the speed of pH recovery from 4.2-4.8 to normal level (7.0-8.0) and thus enhanced the system stability. The conclusion of this study can be used to guide practical engineering.