Search

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented. [ABSTRACT FROM AUTHOR]

The objective of this work was to investigate the influence of hydrogen bonds between fibres on static and dynamic strength properties of paper. A commercial bleached pinewood kraft pulp was soaked in water, refined in a PFI, and used to form paper webs in different solvents, such as water, methanol, ethanol, n-propanol and n-butanol, to determine the effect of their dipole moment on static and dynamic strength properties of resulting paper sheets. Paper which was formed in water, being the solvent of the highest dipole moment among the tested ones, showed the highest breaking length and tear resistance. When paper webs were formed in n-butanol, which was the least polar among the solvents, these parameters were reduced by around 75%. These results provide evidence of the importance of water in paper web formation and strong impact of hydrogen bonds between fibres on strength properties of paper. [ABSTRACT FROM AUTHOR]

Background: The partograph has been endorsed by World Health Organization (WHO) since 1994 which presents an algorithm for assessing maternal and foetal conditions and labor progression. Monitoring labour with a partograph can reduce adverse pregnancy outcomes such as prolonged labor, emergency C-sections, birth asphyxia and stillbirths. However, partograph use is still very low, particularly in low and middle income countries (LMICs). In Bangladesh the reported partograph user rate varies from 1.4% to 33.0%. Recently, an electronic version of the partograph, with the provision of online data entry and user aid for emergency clinical support, has been tested successfully in different settings. With this proven evidence, we conducted and operations research to test the feasibility and effectiveness of implementing an e-partograph, for the first time, in 2 public hospitals in Bangladesh Methods: We followed a prospective crossover design. Two secondary level referral hospitals, Jessore and Kushtia District Hospital (DH) were the study sites. All pregnant women who delivered in the study hospitals were the study participants. All nurse-midwives working in the labor ward of study hospitals were trained on appropriate use of both types of partograph along with standard labour management guidelines. Collected quantitative data was analyzed using SPSS 23 statistical software. Discrete variables were expressed as percentages and presented as frequency distribution and cross tabulations. Chi square tests were employed to test the association between exposure and outcome variables. Potential confounding factors were adjusted using multivariate binary logistic regression methods. Ethical approval was obtained from the institutional review board of the International Centre for Diarrheal Disease Research, Bangladesh (icddr,b). Findings: In total 2918 deliveries were conducted at Jessore DH and 2312 at Kushtia DH during one-year study period. Of them, 1012 (506 in each facility) deliveries were monitored using partograph (paper or electronic). The trends of facility based C-section rates was downwards in both the hospitals; 43% to 37% in Jessore and from 36% to 25% in Kushtia Hospital. There was a significant reduction of prolonged labour with e-partograph use. In Kushtia DH, the prolonged labour rate was 42% during phase 1 with the paper version which came down to 29% during phase-2 with the e-partograph use. The similar result was observed in Jessore DH where the prolonged labour rate reduced to 7% with paper partograph from the reported 30% prolonged labour with e-partograph. The e-partograph user rate was higher than the paper partograph during both phases (phase 1: 3.31, CI: 2.04–5.38, p < .001 and in phase 2: 15.20 CI: 6.36–36.33, p < .001) after adjusting for maternal age, parity, gestational age, religion, mother’s education, husband’s education, and fetal sex Conclusion: The partograph user rate has significantly improved with the e- partograph and was associated with an overall reduction in cesarean births. Use of the e-partograph was also associated with reduced rates of prolonged labour. This study has added to the growing body of evidence on the positive impact of e-partograph use. We recommend implementing e-partograph intervention at scale in both public and private hospitals in Bangladesh. Trial registration: ClinicalTrials.gov . [ABSTRACT FROM AUTHOR]

This paper describes self-reinforced antibacterial and oil-resistant properties that were successfully prepared by surface selective dissolution of filter paper in a NaOH/Urea/ZnO (weight ratio of 8:12:0.25) aqueous solution. The effect of the processing time on the mechanical properties of this paper was evaluated at -12°C. The paper morphologies were characterized using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The oil-resistance and antibacterial properties of the produced paper were also investigated. Excellent mechanical properties were observed for an optimized handling time. The tensile and burst strengths of the modified paper were in excess of 100% of the original. Meanwhile, the treated paper was completely oil-resistant within 24 h and demonstrated good antibacterial properties when exposed to Staphylococcus aureus. The traces of residual zinc oxide were found to be safe for food. [ABSTRACT FROM AUTHOR]

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone. [ABSTRACT FROM AUTHOR]

Background: Peer evaluation is the cornerstone of science evaluation. In this paper, we analyze whether or not a form of peer evaluation, the pre-publication selection of the best papers in Computer Science (CS) conferences, is better than random, when considering future citations received by the papers. Methods: Considering 12 conferences (for several years), we collected the citation counts from Scopus for both the best papers and the non-best papers. For a different set of 17 conferences, we collected the data from Google Scholar. For each data set, we computed the proportion of cases whereby the best paper has more citations. We also compare this proportion for years before 2010 and after to evaluate if there is a propaganda effect. Finally, we count the proportion of best papers that are in the top 10% and 20% most cited for each conference instance. Results: The probability that a best paper will receive more citations than a non best paper is 0.72 (95% CI = 0.66, 0.77) for the Scopus data, and 0.78 (95% CI = 0.74, 0.81) for the Scholar data. There are no significant changes in the probabilities for different years. Also, 51% of the best papers are among the top 10% most cited papers in each conference/year, and 64% of them are among the top 20% most cited. Discussion: There is strong evidence that the selection of best papers in Computer Science conferences is better than a random selection, and that a significant number of the best papers are among the top cited papers in the conference. [ABSTRACT FROM AUTHOR]

Reading primary research literature is an essential skill for all scientists and students on science degree programmes, however little is known about how researchers at different career stages interact with and interpret scientific papers. To explore this, we conducted a survey of 260 undergraduate students and researchers in Biological Sciences at a research intensive UK university. Responses to Likert scale questions demonstrated increases in confidence and skill with reading the literature between individuals at each career stage, including between postdoctoral researchers and faculty academics. The survey indicated that individuals at different career stages valued different sections of scientific papers, and skill in reading the results section develops slowly over the course of an academic career. Inexperienced readers found the methods and results sections of research papers the most difficult to read, and undervalued the importance of the results section and critical interpretation of data. These data highlight a need for structured support with reading scientific literature at multiple career stages, and for senior academics to be aware that junior colleagues may prioritise their reading differently. We propose a model for the development of literature processing skills, and consider the need for training strategies to help inexperienced readers engage with primary literature, and therefore develop important skills that underpin scientific careers. We also encourage researchers to be mindful of language used when writing papers, and to be more inclusive of diverse audiences when disseminating their work. [ABSTRACT FROM AUTHOR]

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector. [ABSTRACT FROM AUTHOR]

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Background: Paper mulberry (Broussonetia papyrifera (L.) L'Hér. ex Vent) is a dioecious tree native to East Asia and mainland Southeast-Asia, introduced prehistorically to Polynesia as a source of bark fiber by Austronesian-speaking voyagers. In Oceania, trees are coppiced and harvested for production of bark-cloth, so flowering is generally unknown. A survey of botanical records of paper mulberry revealed a distributional disjunction: the tree is apparently absent in Borneo and the Philippines. A subsequent study of chloroplast haplotypes linked paper mulberry of Remote Oceania directly to a population in southern Taiwan, distinct from known populations in mainland Southeast-Asia. Methodology: We describe the optimization and use of a DNA marker designed to identify sex in paper mulberry. We used this marker to determine the sex distribution in selected localities across Asia, Near and Remote Oceania. We also characterized all samples using the ribosomal internal transcribed spacer sequence (ITS) in order to relate results to a previous survey of ITS diversity. Results: In Near and Remote Oceania, contemporary paper mulberry plants are all female with the exception of Hawaii, where plants of both sexes are found. In its natural range in Asia, male and female plants are found, as expected. Male plants in Hawaii display an East Asian ITS genotype, consistent with modern introduction, while females in Remote Oceania share a distinctive variant. Conclusions: Most paper mulberry plants now present in the Pacific appear to be descended from female clones introduced prehistorically. In Hawaii, the presence of male and female plants is thought to reflect a dual origin, one a prehistoric female introduction and the other a modern male introduction by Japanese/Chinese immigrants. If only female clones were dispersed from a source-region in Taiwan, this may explain the absence of botanical records and breeding populations in the Philippines and Borneo, and Remote Oceania. [ABSTRACT FROM AUTHOR]

Early industrialization and the development of cheap production processes for paper have led to an exponential accumulation of paper-based documents during the last two centuries. Archives and libraries harbor vast amounts of ancient and modern documents and have to undertake extensive endeavors to protect them from abiotic and biotic deterioration. While services for mechanical preservation such as ex post de-acidification of historic documents are already commercially available, the possibilities for long-term protection of paper-based documents against fungal attack (apart from temperature and humidity control) are very limited. Novel processes for mechanical enhancement of damaged cellulosic documents use Ionic Liquids (IL) as essential process components. With some of these ILs having azole-functionalities similar to well-known fungicides such as Clotrimazole, the possibility of antifungal activities of these ILs was proposed but has not yet been experimentally confirmed. We evaluated the potency of four ILs with potential application in paper restoration for suppression of fungal growth on five relevant paper-infesting molds. The results revealed a general antifungal activity of all ILs, which increased with the size of the non-polar group. Physiological experiments and ultimate elemental analysis allowed to determine the minimal inhibitory concentration of each IL as well as the residual IL concentration in process-treated paper. These results provide valuable guidelines for IL-applications in paper restoration processes with antifungal activity as an added benefit. With azoles remaining in the paper after the process, simultaneous repair and biotic protection in treated documents could be facilitated. [ABSTRACT FROM AUTHOR]

The paper mulberry is one of the multifunctional tree species in agroforestry systems and is also commonly utilized in traditional medicine in China and other Asian countries. However, little is known about its molecular genetics, which hinders research on and exploitation of this valuable resource. To discern the correlation between gene expression and the essential properties of the paper mulberry, we performed a transcriptomics analysis, assembling a total of 37,725 unigenes from 54,638,676 reads generated by RNA-seq. Among these, 22,692 unigenes showed greater than 60% similarity with genes from other species. The lengths of 13,566 annotated unigenes were longer than 1,000 bp. Functional clustering analysis with COG (Cluster of Orthologous Groups) revealed that 17,184 unigenes are primarily involved in transcription, translation, signal transduction, carbohydrate metabolism, secondary metabolism, and energy metabolism. GO (Gene Ontology) annotation suggests enrichment of genes encoding antioxidant activity, transporter activity, biosynthesis, metabolism and stress response, with a total of 30,659 unigenes falling in these categories. KEGG (Kyoto Encyclopedia of Genes and Genomes) metabolic pathway analysis showed that 7,199 unigenes are associated with 119 metabolic pathways. In addition to the basic metabolism, these genes are enriched for plant pathogen interaction, flavonoid metabolism and other secondary metabolic processes. Furthermore, differences in the transcriptomes of leaf, stem and root tissues were analyzed and 7,233 specifically expressed unigenes were identified. This global expression analysis provided novel insights about the molecular mechanisms of the biosynthesis of flavonoid, lignin and cellulose, as well as on the response to biotic and abiotic stresses including the remediation of contaminated soil by the paper mulberry. [ABSTRACT FROM AUTHOR]

Citation patterns were examined for Worm et al. 2006 (Science 314∶787–790), a high-impact paper that focused on relationships between marine biodiversity and ecosystem services. This paper sparked much controversy through its projection, highlighted in the press release, that all marine fisheries would be collapsed by 2048. Analysis of 664 citing papers revealed that only a small percentage (11%) referred to the 2048 projection, while 39% referred to fisheries collapse in general, and 40% to biodiversity and ecosystem services. The 2048 projection was mentioned more often in papers published soon after the original paper, in low-impact journals, and in journals outside of fields that would be expected to focus on biodiversity. Citing papers also mentioned the 2048 projection more often if they had few authors (28% of single-author papers vs. 2% of papers with 10 or more authors). These factors suggest that the more knowledgeable the authors of citing papers were about the controversy over the 2048 projection, the less likely they were to refer to it. A noteworthy finding was that if the original authors were also involved in the citing papers, they rarely (1 of 55 papers, 2%) mentioned the 2048 projection. Thus the original authors have emphasized the broader concerns about biodiversity loss, rather than the 2048 projection, as the key result of their study. [ABSTRACT FROM AUTHOR]

Recent studies have reported incipient morphological caste dimorphism in the Van der Vecht organ size of some temperate Polistes paper wasps. Whether species other than the temperate ones show a similar pattern remains elusive. Here, we have studied some Neotropical Polistes species. By comparing females collected through the year, we showed caste related differences in the size of the Van der Vecht organ in P. ferreri (body size corrected Van der Vech organ size of queens = 0.45 ± 0.06, workers = 0.38 ± 0.07 mm2, p = 0.0021), P. versicolor (body size corrected Van der Vech organ size of queens = 0.54 ± 0.11, workers = 0.46 ± 0.09 mm2, p = 0.010), but not P. simillimus (body size corrected Van der Vech organ size of queens = 0.52 ± 0.05, workers = 0.49 ± 0.06 mm2, p = 0.238). Therefore, it seems that queens and workers of some Neotropical Polistes have diverged in their ontogenic trajectory of the Van der Vecht organ size, providing clear evidence for incipient morphological caste dimorphism. As Polistes are distributed mostly in the tropics, we propose that physical caste differences may be widespread in the genus. Also, we highlight that morphological divergence in the queen–worker phenotypes may have started through differential selection of body structures, like the Van der Vecht organ. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Background: The lack of information regarding the burden of acute bacterial meningitis in Latin America leads to a reduction in the estimated incidence rates of the disease, and impairs public health decisions on the use and follow-up of preventive interventions, particularly, the evaluation of existing vaccination policies. The use of the real-time PCR in diagnostic routine procedures has resulted in a substantial increase in confirmed bacterial meningitis cases. However, in resource-poor countries, these assays are only available in reference laboratories. Sample transportation to these laboratories is a critical constraint, as it requires specialized, high cost courier services. To overcome this barrier we evaluated the use of FTATM Elute filter paper cards for the conservation and processing of samples under normal environmental conditions, as they would be when transported from remote and under-equipped healthcare facilities to the reference centers. A total of 401 samples received in 2015 as part of Sao Paulo’s national surveillance for routine diagnosis were selected for this study. Methods: The sensitivity and specificity of real-time PCR were evaluated using fresh serum and cerebrospinal fluid (CSF) samples processed using our laboratory’s standard DNA extraction, and processing the same samples after being dried and stored on FTATM card, and DNA extracted following the manufacturer’s instructions. Results: The sensitivities for detection of Neisseria meningitidis, Streptococcus pneumoniae, and Haemophilus influenzae from CSF dried and stored on FTATM cards were 98%, 92%, and 100%, respectively, and with serum samples were 73%, 88%, and 100%, respectively. When compared to our laboratory’s standard methodology, results showed high concordance, with Kappa index ranges of 0.9877–1.00 for CSF, and 0.8004–1.00 for serum samples. Conclusion: The use of FTATM cards for CSF and serum conservation and transport represents a rapid, reliable, and cost-effective alternative that will allow obtaining valuable epidemiological information that would otherwise be lost. [ABSTRACT FROM AUTHOR]

Background: The European & Developing Countries Clinical Trials Partnership (EDCTP), like many other research funders, requires its grantees to make papers available via open access (OA). This article investigates the effect of publishing in OA journals and international collaboration within and between European and sub-Saharan African countries on citation impact and likelihood of falling into the top 1% and top 10% most cited papers in poverty-related disease (PRD) research. Methods: Disease-specific research publications were identified in the Web of Science™ and MEDLINE using Medical Subject Heading (MeSH) terms. Data on the open accessibility of scientific literature were derived from 1science oaFindr. Publication data, including relative citation counts, were extracted for 2003–2015. Regression models were applied to quantify the relationship between relative citations and presence in the 1% and top 10% most cited papers versus OA and international collaboration. Results: The results show that since 2003 papers on PRDs have become increasingly available in OA. Among all PRD areas, malaria research is most frequently published in OA and in international collaboration. The adjusted regression analyses show that holding other factors constant, publishing research in OA and in international collaboration has a significant and meaningful citation advantage over non-OA or non-international collaborative research. Publishing papers as part of a European-wide or European- sub-Saharan African collaboration increases research impact. In contrast, such collaboration advantage is not observed for research output involving sub-Saharan Africa only which seems to decrease research impact. Conclusions: Our results indicate that there is a real, measurable citation advantage for publishing PRD research in OA and international collaboration. However, the international collaboration advantage seems to be region-specific with increased research impact for European-wide and European-sub-Saharan African collaborations but a decrease in research impact of collaborations confined to sub-Saharan African research institutions. Further research is required to further verify this finding and to understand the underlying factors related to this observed decrease in research impact. To target future research capacity building activities in sub-Saharan Africa it is important to assess whether the observed decreased impact reflects the scientific competencies and geographic distribution of individual researchers or institutional-, national- or funder-specific research requirements. [ABSTRACT FROM AUTHOR]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

In order to reduce the ecotoxicity of paper mill, four different enzymatic pretreatment strategies were investigated in comparison to conventional chemical based processes. In strategy I, xylanase-aided pretreatment of pulp was carried out, and in strategy II, xylanase and laccase-mediator systems were used sequentially. Moreover, to compare the efficiency of Bacillus stearothermophilus xylanase and Ceriporiopsis subvermispora laccase in the reduction of ecotoxicity and pollution, parallel strategies (III and IV) were implemented using commercial enzymes. Conventional CDEOPD1D2 (CD, Cl2 with ClO2; EOP, H2O2 extraction; D1 and D2, ClO2) and X/XLCDEOPD1D2 (X, xylanase; L, laccase) sequences were employed with non-enzymatic and enzymatic strategies, respectively. Acute toxicity was determined by the extent of inhibition of bioluminescence of Vibrio fischeri with different dilutions of the effluent. Two-fold increase was observed in EC50 values for strategy I compared to the control process. On the other hand, sequential application of commercial enzymes resulted in higher acute toxicity compared to lab enzymes. In comparison to the control process, strategy II was the most efficient and successfully reduced 60.1 and 25.8% of biological oxygen demand (BOD) and color of effluents, respectively. We report for the first time the comparative analysis of the ecotoxicity of industrial effluents. [ABSTRACT FROM AUTHOR]

Do highly productive researchers have significantly higher probability to produce top cited papers? Or do high productive researchers mainly produce a sea of irrelevant papers—in other words do we find a diminishing marginal result from productivity? The answer on these questions is important, as it may help to answer the question of whether the increased competition and increased use of indicators for research evaluation and accountability focus has perverse effects or not. We use a Swedish author disambiguated dataset consisting of 48.000 researchers and their WoS-publications during the period of 2008–2011 with citations until 2014 to investigate the relation between productivity and production of highly cited papers. As the analysis shows, quantity does make a difference. [ABSTRACT FROM AUTHOR]

The paper mulberry is one of the multifunctional tree species in agroforestry systems and is also commonly utilized in traditional medicine in China and other Asian countries. However, little is known about its molecular genetics, which hinders research on and exploitation of this valuable resource. To discern the correlation between gene expression and the essential properties of the paper mulberry, we performed a transcriptomics analysis, assembling a total of 37,725 unigenes from 54,638,676 reads generated by RNA-seq. Among these, 22,692 unigenes showed greater than 60% similarity with genes from other species. The lengths of 13,566 annotated unigenes were longer than 1,000 bp. Functional clustering analysis with COG (Cluster of Orthologous Groups) revealed that 17,184 unigenes are primarily involved in transcription, translation, signal transduction, carbohydrate metabolism, secondary metabolism, and energy metabolism. GO (Gene Ontology) annotation suggests enrichment of genes encoding antioxidant activity, transporter activity, biosynthesis, metabolism and stress response, with a total of 30,659 unigenes falling in these categories. KEGG (Kyoto Encyclopedia of Genes and Genomes) metabolic pathway analysis showed that 7,199 unigenes are associated with 119 metabolic pathways. In addition to the basic metabolism, these genes are enriched for plant pathogen interaction, flavonoid metabolism and other secondary metabolic processes. Furthermore, differences in the transcriptomes of leaf, stem and root tissues were analyzed and 7,233 specifically expressed unigenes were identified. This global expression analysis provided novel insights about the molecular mechanisms of the biosynthesis of flavonoid, lignin and cellulose, as well as on the response to biotic and abiotic stresses including the remediation of contaminated soil by the paper mulberry. [ABSTRACT FROM AUTHOR]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

Bisphenol A (BPA) is an endocrine disrupting chemical used in a wide range of consumer products including photoactive dyes used in thermal paper. Recent studies have shown that dermal absorption of BPA can occur when handling these papers. Yet, regulatory agencies have largely dismissed thermal paper as a major source of BPA exposure. Exposure estimates provided by agencies such as the European Food Safety Authority (EFSA) are based on assumptions about how humans interact with this material, stating that ‘typical’ exposures for adults involve only one handling per day for short periods of time (<1 minute), with limited exposure surfaces (three fingertips). The objective of this study was to determine how individuals handle thermal paper in one common setting: a cafeteria providing short-order meals. We observed thermal paper handling in a college-aged population (n = 698 subjects) at the University of Massachusetts’ dining facility. We find that in this setting, individuals handle receipts for an average of 11.5 min, that >30% of individuals hold thermal paper with more than three fingertips, and >60% allow the paper to touch their palm. Only 11% of the participants we observed were consistent with the EFSA model for time of contact and dermal surface area. Mathematical modeling based on handling times we measured and previously published transfer coefficients, concentrations of BPA in paper, and absorption factors indicate the most conservative estimated intake from handling thermal paper in this population is 51.1 ng/kg/day, similar to EFSA’s estimates of 59 ng/kg/day from dermal exposures. Less conservative estimates, using published data on concentrations in thermal paper and transfer rates to skin, indicate that exposures are likely significantly higher. Based on our observational data, we propose that the current models for estimating dermal BPA exposures are not consistent with normal human behavior and should be reevaluated. [ABSTRACT FROM AUTHOR]

Raman spectroscopy has proven to be an indispensable technique for the identification of various types of analytes due to the fingerprint vibration spectrum obtained. Paper microfluidics has also emerged as a low cost, easy to fabricate and portable approach for point of care testing. However, due to inherent background fluorescence, combining Raman spectroscopy with paper microfluidics is to date an unmet challenge in the absence of using surface enhanced mechanisms. We describe the first use of wavelength modulated Raman spectroscopy (WMRS) for analysis on a paper microfluidics platform. This study demonstrates the ability to suppress the background fluorescence of the paper using WMRS and the subsequent implementation of this technique for pharmaceutical analysis. The results of this study demonstrate that it is possible to discriminate between both paracetamol and ibuprofen, whilst, also being able to detect the presence of each analyte quantitatively at nanomolar concentrations. [ABSTRACT FROM AUTHOR]

The action required to stem the environmental and social implications of climate change depends crucially on how humankind shapes technology, economy, lifestyle and policy. With transport CO2 emissions accounting for about a quarter of the total, we examine the contribution of CO2 output by scientific travel. Thankfully for the reputation of the scientific community, CO2 emissions associated with the trips required to present a paper at a scientific conference account for just 0.003% of the yearly total. However, with CO2 emissions for a single conference trip amounting to 7% of an average individual’s total CO2 emissions, scientists should lead by example by demonstrating leadership in addressing the issue. [ABSTRACT FROM AUTHOR]

The distinction between worker and reproductive castes of social insects is receiving increased attention from a developmental rather than adaptive perspective. In the wasp genus Polistes, colonies are founded by one or more females, and the female offspring that emerge in that colony are either non-reproducing workers or future reproductives of the following generation (gynes). A growing number of studies now indicate that workers emerge with activated reproductive physiology, whereas the future reproductive gynes do not. Low nourishment levels for larvae during the worker-rearing phase of the colony cycle and higher nourishment levels for larvae when gynes are reared are now strongly suspected of playing a major role in this difference. Here, we present the results of a laboratory rearing experiment in which Polistes metricus single foundresses were held in environmental conditions with a higher level of control than in any previously published study, and the amount of protein nourishment made available to feed larvae was the only input variable. Three experimental feeding treatments were tested: restricted, unrestricted, and hand-supplemented. Analysis of multiple response variables shows that wasps reared on restricted protein nourishment, which would be the case for wasps reared in field conditions that subsequently become workers, tend toward trait values that characterize active reproductive physiology. Wasps reared on unrestricted and hand-supplemented protein, which replicates higher feeding levels for larvae in field conditions that subsequently become gynes, tend toward trait values that characterize inactive reproductive physiology. Although the experiment was not designed to test for worker behavior per se, our results further implicate activated reproductive physiology as a developmental response to low larval nourishment as a fundamental aspect of worker behavior in Polistes. [ABSTRACT FROM AUTHOR]

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery. [ABSTRACT FROM AUTHOR]

The UK is one of the largest funders of health research in the world, but little is known about how health funding is spent. Our study explores whether major UK public and charitable health research funders support the research of UK-based scientists producing the most highly-cited research. To address this question, we searched for UK-based authors of peer-reviewed papers that were published between January 2006 and February 2018 and received over 1000 citations in Scopus. We explored whether these authors have held a grant from the National Institute for Health Research (NIHR), the Medical Research Council (MRC) and the Wellcome Trust and compared the results with UK-based researchers who serve currently on the boards of these bodies. From the 1,370 papers relevant to medical, biomedical, life and health sciences with more than 1000 citations in the period examined, we identified 223 individuals from a UK institution at the time of publication who were either first/last or single authors. Of those, 164 are still in UK academic institutions, while 59 are not currently in UK academia (have left the country, are retired, or work in other sectors). Of the 164 individuals, only 59 (36%; 95% CI: 29–43%) currently hold an active grant from one of the three funders. Only 79 (48%; 95% CI: 41–56%) have held an active grant from any of the three funders between 2006–2017. Conversely, 457 of the 664 board members of MRC, Wellcome Trust, and NIHR (69%; 95% CI: 65–72%) have held an active grant in the same period by any of these funders. Only 7 out of 655 board members (1.1%) were first, last or single authors of an extremely highly-cited paper. There are many reasons why the majority of the most influential UK authors do not hold a grant from the country’s major public and charitable funding bodies. Nevertheless, the results are worrisome and subscribe to similar patterns shown in the US. We discuss possible implications and suggest ways forward. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

Written communication plays a crucial role in the history of modern civilizations as manuscripts do not only exist contemporarily, but are passed on to subsequent generations. Besides a document’s content, information is stored in the materials used for its production. Analyses of the composition allow, for example, identifying the biological origins of materials, dating, and help to understand degradation patterns. A combination of microscopic and DNA approaches was applied in order to analyze various plant derived writing sheets. Given their diversity and abundance in museum collections, plant based writing supports are yet an underexplored target for DNA studies. DNA retrieval of paper is low compared to raw paper plant material, which is likely due to the loss of organic components during paper production. Optimizing DNA extraction for each respective material drastically increased DNA recovery. Finally, we present a non-invasive DNA sampling method that utilizes nylon membranes, commonly used for bacterial DNA sampling and that is applicable to delicate material. Although bacterial infestation was visible on one sample, as indicated by scanning electron microscopy, endogenous DNA was retrieved. The results presented here are promising as they extend the scope of sources for DNA analyses by demonstrating that DNA molecules can be retrieved from a variety of plant derived writing supports. In future, such analyses can help to explore the biological diversity not only of plants and of additives utilized for producing writing supports, but also of the plenty products made from paper. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Paper mulberry, Broussonetia papyrifera (L.) L’Hér. ex Vent. (Moraceae), a dioecious species, was transported by humans from Taiwan to the islands of Remote Oceania. Its introduction and cultivation in Remote Oceania was intentional due to its cultural importance as a fiber source for barkcloth textiles. The aim of this study was to explore the genetic diversity and structure of paper mulberry populations within Remote Oceania in order to infer dispersal patterns that may reflect past human interaction among island groups. We present the integrated analysis of 380 samples (313 contemporary and 67 herbarium specimens) collected in Near and Remote Oceania. Genetic characterization was based on a set of ten microsatellites developed for B. papyrifera and complemented with the analysis of the ribosomal internal transcribed spacer ITS-1 sequence, a sex marker and the chloroplast ndhF–rpl32 intergenic spacer. Microsatellite data identify a total of 64 genotypes, despite this being a clonally propagated crop, and show three major dispersal hubs within Remote Oceania, centered on the islands of Fiji, Tonga, and Pitcairn. Of 64 genotypes identified, 55 correspond to genotypes associated to female-sexed plants that probably descend from plants introduced by the prehistoric Austronesian-speaking voyagers. The ratio of accessions to genotypes between herbarium and contemporary samples, suggests recent loss of genetic diversity. In addition to the chloroplast haplotypes described previously, we detected two new haplotypes within Remote Oceania both originating in Taiwan. This is the first study of a commensal species to show genetic structuring within Remote Oceania. In spite of the genetic bottleneck, the presence of only one sex, a timespan of less than 5000 years, and asexual propagation of this crop in Remote Oceania, we detect genetic diversity and regional structuring. These observations suggest specific migration routes between island groups within Remote Oceania. [ABSTRACT FROM AUTHOR]