Search

A dual-peak long period fiber grating (DP-LPFG)-based sensor was designed and fabricated for the sensitive detection of riboflavin concentration. LPFGs with a period of 163 μm and a cladding mode of LP 0, 12 were inscribed on a standard single-mode silica fiber using a femtosecond laser direct writing technique. Coatings of silica-based materials doped with β-cyclodextrin (β-CD), prepared via the sol-gel method, were applied to the surface of the LPFGs for the detection of riboflavin. To investigate the impact of coating thickness on the sensing sensitivity, sol-gel coatings of different thicknesses were applied to the surface of the LPFG sensor. Experimental findings revealed that the sensor with a thickness of approximately 540 nm sol-gel coatings exhibited superior sensing performance. The detection limit of the prepared DP-LPFG sensor was tested to be 0.08 nM, and it exhibits a response time of less than 3 minutes, along with high sensitivity, excellent repeatability, and selectivity. Thus, this sensor holds significant promise for applications in disease treatment and diagnosis, as well as in ensuring food quality.

Aiming at the problem that the error of multi-optical axis alignment is difficult to control in the simulation calibration test, a multi-optical axis dynamic compensation alignment method for the space environment simulation system is proposed. The effect of optical axis disturbance on the signal detection link was analyzed to obtain the alignment accuracy requirements, the optical axis alignment error compensation mechanism was established, the target simulation system with long pupil distance was designed, the alignment error transfer model based on topology structure was constructed, and the test prototype was built. The test results show that the static attitude alignment resolution is better than 3" and the position alignment resolution is better than 11µm. After online compensation, the position error is better than 11.04µm, and the energy error is better than 3.2%, which realizes the online monitoring and compensation of the optical axis alignment error of the ground space environment simulation system.

A multifunctional structured silicon with enhanced optical and photoelectric properties has been processed by femtosecond (fs) laser in ambient air. The structured surface decorated with Au nanoparticles (NPs) exhibits excellent infrared absorption properties related to localized surface plasmon resonance (LSPR) coupled to microstructures. Over 75% absorption is achieved at 1550 nm, which is three orders of magnitude higher than that of unprocessed Si. The absorption enhancement results in increased photocurrent response in n  +  -n junction diodes, exhibiting a responsivity of 125 mA/W and an external quantum efficiency (EQE) of 10% at 1550 nm, for a bias voltage of 10 V. Moreover, the structured Si is also tested as a surface-enhanced Raman spectroscopy (SERS) substrate showing a strong signal under 638 nm excitation with Raman enhancement factors (EFs) as high as 10 8 . In particular, the capability of detecting Raman analyte down to 10 -11 M for RhB and 10 -10 M for 4-MBA is demonstrated, simultaneously assessing the enhanced near-field due to the LSPR originating from the processed surface roughness leading to the valuable performances achieved by the n  +  -n junction diodes. These results offer a new path toward the elaboration of high-efficiency applications of Si structured surfaces in the fields of photoelectric sensing and detection.

The rapid acquisition of projective images with low radiation dose is essential in computed tomography with diffraction enhanced imaging to extract absorption, refraction, and scattering images from weakly absorbing specimens. This plays a critical role in applying diffraction enhanced imaging to biological and medical imaging. In this study, an improved diffraction enhanced imaging method is proposed to rapidly implement X-ray trimodal computed tomography. This method positions the sample in a specific region near the analyzer crystal, allowing the simultaneous acquisition of transmitted and diffracted images in a single exposure. When combined with computed tomography, three different sample properties, known as absorption, phase and scattering, can be reconstructed simultaneously by collecting the projective images as the sample rotates from 0° to 360°. The experimental results demonstrate that this straightforward method enables the quantitative extraction of sample information and simplifies the data acquisition procedure in computed tomography with diffraction enhanced imaging. Therefore, this novel method offers the advantages of straightforward imaging device, rapid CT data acquisition, low radiation dose and more comprehensive sample information extraction.

Balancing speed and accuracy has always been a challenge in 3D reconstruction. One-shot structured light illuminations are of perfect performance on real-time scanning, while the related 3D point clouds are typically of relatively poor quality, especially in regions with rapid height changes. To solve this problem, we propose a one-shot reconstruction scheme based on shearlet transform, which combines spatial and frequency domain information to enhance reconstruction accuracy. First, we apply the shearlet transform to the deformed fringe pattern to obtain the transform coefficients. Second, pixel-wise select the indices associated with the N largest coefficients in magnitude to obtain a new filter. Finally, we refocus globally to extract phase using these filters and generate a reliable quality map based on coefficient magnitudes to guide phase unwrapping. Simultaneously, we utilize the maximum coefficient value to generate a quality map for guiding the phase unwrapping process. Experimental results show that the proposed method is robust in discontinuous regions, resulting in more accurate 3D point clouds.

We proposed and successfully validated improved the sensitivity of magnetic field sensing using the Vernier effect in a dual-loop optoelectronic oscillator (OEO) incorporating cascaded L-shaped Terfenol-D-FBGs. Thanks to the time delay introduced by the dispersion compensating fiber (DCF) in the OEO cavity, precise conversion between the sensing FBG wavelength changes and the OEO oscillation frequency can be achieved. The central wavelengths of the sensing Terfenol-D-FBG change along with the magnetic field. Therefore, the magnetic field can be monitored by measuring the oscillating frequency of the OEO. In the proposed scheme, two reflection signals from the cascaded FBGs pass through two fiber paths with slightly different lengths, inducing the Vernier effect in the OEO, which significantly enhances the sensitivity of the sensor. Additionally, a bias magnetic field is applied to the sensing Terfenol-D alloy to further improve the sensitivity. Experimental results demonstrate that by applying a bias magnetic field on both sides of the sensing Terfenol-D, the sensitivity of the single-loop OEO is increased from 421 Hz/mT to 560 Hz/mT. Utilizing the Vernier effect, the magnetic field sensitivity of the dual-loop OEO reaches up to -16.54 kHz/mT, with a 29-times improvement over the single-loop OEO's 560 Hz/mT. By finely adjusting the path length difference, we further enhance the performance of the sensor, achieving sensitivities of -24.58 kHz/mT, -28.49 kHz/mT and -35.94 kHz/mT, respectively, which are 44 times, 51 times and 64 times higher than the single-loop OEO structure. Besides, to overcome the influence of temperature, a temperature compensation sensor is designed using a pair of L-shaped Terfenol-D alloys to host the cascaded sensing FBG and reference FBG. The experimental results show that the proposed L-shaped Terfenol-D with cascaded FBG can reduce the magnetic field error caused by temperature crosstalk to 0.03 mT.

Photon-counting single-pixel imaging (SPI) can image under low-light conditions with high-sensitivity detection. However, the imaging quality of these systems will degrade due to the undersampling and intrinsic photon-noise in practical applications. Here, we propose a deep unfolding network based on the Bayesian maximum a posterior (MAP) estimation and alternating direction method of multipliers (ADMM) algorithm. The reconstruction framework adopts a learnable denoiser by convolutional neural network (CNN) instead of explicit function with hand-crafted prior. Our method enhances the imaging quality compared to traditional methods and data-driven CNN under different photon-noise levels at a low sampling rate of 8%. Using our method, the sensitivity of photon-counting SPI prototype system for fluorescence imaging can reach 7.4 pmol/ml. In-vivo imaging of a mouse bearing tumor demonstrates an 8-times imaging efficiency improvement.

Electron correlation (EC) plays a crucial role in all multi-electron systems and dynamic processes. In this work, we focus on strong laser-induced bound-bound transitions (BBT), which are fundamental to optical absorption measurements. We use the helium atom, the simplest two-electron system, as our test case, utilizing the ab initio code package HeTDSE. We examined the bound state energy levels, transition dipole moments (TDMs), and the dynamics of strong laser-induced BBT, both with and without considering EC. Our results indicate that EC significantly impacts the energy levels of the bound states and the TDMs. These effects collectively influence the transition dynamics of the excited states. Although EC does not alter the quantum transition pathways between resonance states, it generally increases the probability of resonance transitions in most cases. Our findings provide a quantitative description of EC in laser-induced BBT.

This study introduces a novel distributed temperature sensing (DTS) technique on silicon-on-insulator (SOI) chips by the optical frequency domain reflectometry (OFDR) technology. In contrast to traditional on-chip silicon photonics temperature sensors which rely on transmission spectrum detection, this method is based on Rayleigh backscatter induced by the sidewall roughness of as-fabricated waveguides, eliminating the need for a specially designed structure. On-chip DTS results with a remarkable sensing spatial resolution of 200 μ m and a high temperature sensitivity of 88 pm/K are demonstrated within the temperature range from 22.8  ∘ C to 200 ∘ C. Furthermore, the technology is employed to measure non-uniform temperature distributions along an SOI waveguide generated by integrated heaters. Importantly, this approach offers a straightforward sensing structure, opening new possibilities for investigating temperature profiles and thermal crosstalk across the chip.

Metasurface holography has become a surging and revolutionized field due to its flexible manipulation of amplitude and/or phase, which enhances the quality and capacity of holographic images. However, the current meta-holograms primarily focus on half-space manipulation, posing a challenge in developing simplified meta-hologram structures for spatial multiplexing. To address this situation, what we believe to be a novel 4-bit "Janus" metasurface combined with the weighted Gerchberg-Saxton (WGS) algorithm is proposed to record and reconstruct two distinct images in millimeter wave band. By meticulously designing the single-layer units, the 4-bit Janus metasurface achieves independent amplitude and phase responses in two orthogonal information channels. Moreover, the imaging ability of the proposed metasurface is investigated under different amplitude and phase dispersion. Comparative analysis also highlights several notable advantages of our work, including a low-profile design, polarization-frequency multiplexing, and enhanced imaging efficiency. The proposed method is verified through theoretical calculations, simulations, and experiments, and promises a versatile platform for applications in data storage, encryption, and auxiliary sensing.

The growth of fused silica surface damage poses a high risk in operating high-power laser devices, with complex physical mechanisms related not only to the wavelength, pulse width, fluence of incident pulse lasers, but also to initial damage size and material properties. With low-temporal coherence light (LTCL) increasingly applied in high-power laser-driven inertial confinement fusion (ICF), LTCL-induced damage growth has become a bottleneck limiting output power improvements. This paper analyzes LTCL damage growth characteristics and mechanisms on fused silica surfaces, obtaining its damage growth coefficient and threshold. By analyzing chemical composition variation, electric field of initial damage, and comparing the damage growth threshold of artificial initial damage, the mechanism of surface damage growth is investigated. This research provides reliable information for estimating fused silica lifetime in high-power LTCL devices and contributes to understanding LTCL properties.

Aiming at the problem of background stray light affecting the display of dim target scenes in existing projectors, a stray light suppression optical engine based on a polarizer is proposed. First, the effect of the background stray light of traditional LCOS target projectors on the display of dim targets is analyzed with simulation, and the sources of stray light in the target projector were analyzed as well. Secondly, we theoretically analyze the causes of different stray light paths and stray light polarization states, propose the method of stray light suppression based on the polarizer, and calculate the rotation angle of the polarizer. Then, we simulate and analyze the stray light suppression effect of the polarizer-based target projector model. Finally, a dim target projector test experiment system is built to verify the actual level of stray light suppression. The simulation results show that the highest stray light energy of the target projector with the polarizer-based stray light suppression optical engine has decreased by 2.37 times compared to the conventional LCOS target projector, the stray light coefficient has decreased from the previous 2.12% to 0.60%, and the simulated contrast ratio has been improved by 2.98 times. The experimental results show that the polarizer-based stray light suppression optical engine is able to reduce the peak gray level of the background stray light energy of the projected display image of the target projector by nearly 2 times, and improve the contrast of the gray level by 2.79 times. The suppression of dim target projector background stray light and the improvement of the contrast of the projected display image are realized.

To distinguish the contributions of electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS) in their applications in precision laser spectroscopy, we propose a real-imaginary spectrum decomposition method to investigate the transparency spectra in a four-level microwave (MW) dressed Rydberg system. We show that the opening transparency windows in the absorption spectra of probe field is a prominent character by EIT, EIT-ATS crossover, and ATS when the MW field is turned off and the intensity of the control field is adjusted. When the MW field is turned on and gradually increased, the EIT is destroyed and disappears. In addition, the most prominent characters that open a transparency window are the EIT-ATS crossover and the ATS. Then, if we further increase the intensity of the MW field, we find that the transparency windows open mainly due to the ATS. Compared to the previous considerations of this issue, which were limited to three-level systems, our four-level scheme reported here is useful for understanding the features of quantum interference in multilevel atomic systems, and has potential applications to study enhanced sensitivity, measurement spectroscopic, quantum processing, quantum communication, and transmission.

Precisely sensing the light field direction information plays the essential role in the fields of three-dimensional (3D) imaging, light field sensing, target positioning and tracking, remote sensing, etc. It is thrilling to find that the optical fiber can be used as a sensing component due to its high sensitivity, compact size, and strong resistance to electromagnetic interference. According to the core principle that the few-mode fiber output speckle pattern is sensitive to the change of incident light field direction, the variation characteristics is further investigated in this research study. Based on the simulation and analysis of the fiber transmission characteristics, the output speckle corresponding to the incident light field with the direction in the range of ±6° horizontally and vertically are calculated. Furthermore, a deep convolutional neural network (CNN): fiber speckle demodulation network (FSDNET) is proposed and constructed to establish what we believe to be a novel way to reveal and identify the mapping relationship between the light field direction and the output speckle. The theoretical simulation shows that the mean absolute error (MAE) between the perceived light field directions and the true directions is 0.01°. Then, a light field direction sensing system based on the few-mode fiber is developed. Regarding to the performance of the sensing system, the MAE of the FSDNET for the light field directions that have appeared in the training set is 0.0389°, and for testing set of the unknown directions that have not appeared in the training set, the MAE is 0.0570°. Therefore, the simulation and experimental results prove that high performance sensing of light field direction can be achieved by the proposed few-mode fiber sensing system and the FSDNET.

As a stochastic perturbation, the inter-core crosstalk (IC-XT) severely distorts the signal in multi-core fibers (MCF), especially for long-haul transmission. How to quickly measure and monitor the IC-XT online for an MCF-based space division multiplexing (SDM) system is of special importance. In this paper, we introduce the technology of auxiliary management and control channel (AMCC) to online monitor the IC-XT of MCF, in which the unique advantage of low-frequency auxiliary management and control signal is fully utilized with the limited influence on high-speed data transmission. Specifically, two orthogonal sequences are chosen as monitoring signals for the signal-channel core and the crosstalk-channel core, respectively, followed by digital signal processing (DSP) for the received signal to evaluate the real-time crosstalk accurately. The experimental verifications of XT online monitoring confirm the effectiveness of our proposed method with very small monitoring error (mostly < 0.5 dB) for both heterodyne XT and homodyne XT in the C and L bands, showing its great potential for future SDM systems.

Here we propose a method to fabricate black Si without the need for any chalcogenide doping, accomplished by femtosecond (fs) laser irradiation in a liquid environment, aiming to fabricate the infrared detector and investigating their optoelectronic performance. Multi-scale laser-induced periodical surface structures (LIPSSs), containing micron sized grooves decorated with low spatial frequency ripples on the surface, can be clearly observed by SEM and 3D confocal microscope. The generated black Si demonstrates superior absorption capabilities across a broad wavelength range of 200-2500 nm, achieving an average absorptance of up to 71%. This represents a notable enhancement in comparison to untreated Si, which exhibits an average absorption rate of no more than 20% across the entire detectable spectrum. A metal-semiconductor-metal (MSM) type photodetector was fabricated based on this black Si, demonstrating remarkable optoelectronic properties, specifically, it attains a responsivity of 50.2 mA/W@10 V and an external quantum efficiency (EQE) of 4.02% at a wavelength of 1550 nm, significantly outperforming the unprocessed Si by more than five orders of magnitude. The great enhancement in infrared absorption as well as the optoelectronic performance can be ascribed to the synergistic effect of the multi-scale LIPSSs and the generated intermediate energy levels. On one hand, the multi-scale structures contribute to an anti-reflection and light trapping property; on the other hand, the defects levels generated through fs laser ablation process under water may narrow the band gap of the Si. The results therefore underscore the remarkable potential of black Si processed by fs laser under water for the application of photodetection, especially in the near-infrared band.

The anisotropic optical properties of aluminum scandium nitride (Al 1-x ScxN) thin films for both ordinary and extraordinary light are investigated. A quantitative analysis of the band structures of the wurtzite Al 1-x ScxN is carried out. In addition, Al 1-x ScxN photonic waveguides and bends are fabricated on 8-inch Si substrates. With x = 0.087 and 0.181, the light propagation losses are 5.98 ± 0.11 dB/cm and 8.23 ± 0.39 dB/cm, and the 90° bending losses are 0.05 dB/turn and 0.08 dB/turn at 1550 nm wavelength, respectively.

Tb-doped magneto-optical (MO) glass is widely used in fiber optics, optical isolators, and modulators. However, only the paramagnetic Tb 3+ ions exhibit significant MO effects, whereas the diamagnetism Tb 4+ ions suppress the MO effects. Therefore, the valence state control of Tb ions is very critical to optimize MO performance. Here, a reduction strategy was introduced to adjust the Tb valence in glass to achieve the high MO effect. The TiO, which has low valence Ti 2+ ions and good reducibility, was used to suppress the oxidation of Tb 3+ to Tb 4+ ions. In the TiO-B 2 O 3 -Al 2 O 3 -Na 2 O glass, 10 mol% TiO can increase the Verdet constant at 650 nm by 19%. With the further increase in Tb 2 O 3 concentration, the Verdet constant reaches a high value of 117 rad/(T·m) at 650 nm, which is close to the Verdet constant of TGG crystal (121 rad/(T·m)). This work provides a new approach to increase the Verdet constant of MO glass.

A single-frequency distributed Bragg Reflector (DBR) fiber laser operating at 1091 nm was demonstrated by using a Yb:YAG crystal-derived silica fiber (YDSF). The YDSF was prepared via the molten core (MC) method, with a Yb 2 O 3 doping concentration of 5.60 wt.% in the core, resulting in a gain coefficient of 1.45 dB/cm at 1091 nm. Employing 0.8 cm of the YDSF, we attained a single-frequency laser with a maximum output power of 145 mW and a slope efficiency of 31.8%. The laser exhibited an optical signal-to-noise ratio (OSNR) exceeding 71 dB, a linewidth of ∼34 kHz, and a stabilized relative intensity noise (RIN) at -132 dB/Hz for frequencies over 4.5 MHz. The fiber laser could serve as an outstanding seed source for high-power, narrow-linewidth fiber amplifiers operating at 1091 nm.

Lidar is an effective remote sensing method to obtain the vertical distribution of aerosols, and how to select the aerosol extinction-backscattering ratio (AE-BR) during the inversion process is a key step to guarantee the accuracy of the lidar inversion of aerosol optical thickness (AOD) and aerosol extinction coefficient profile (AECP). In this paper, an inversion algorithm for AOD and AECP based on a genetic BP (GA-BP) neural network is proposed. Simultaneous measurements are carried out using CE318 sun photometer and lidar, and the mapping relationship between the lidar echo signal and AOD is established based on the genetic BP (GA-BP) neural network method, which achieves the accurate inversion of AOD with an absolute error mean value of 0.0156. Based on the AOD output from the GA-BP neural network, the real-time best AE- BR to improve the inversion accuracy of AECP. Finally, practical tests show that the method achieves accurate inversion of AOD, determines the range of AE-BR from 20-50sr, realizes real-time dynamic correction of AECP, and has strong generalization ability and applicability in practical situations.

Particle manipulation through the transfer of light or sound momentum has emerged as a powerful technique with immense potential in various fields, including cell biology, microparticle assembly, and lab-on-chip technology. Here, we present a novel method called Programmable Photoacoustic Manipulation (PPAM) of microparticles in liquid, which enables rapid and precise arrangement and controllable transport of numerous silica particles in water. Our approach leverages the modulation of pulsed laser using digital micromirror devices (DMD) to generate localized Lamb waves in a stainless steel membrane and acoustic waves in water. The particles undergo a mechanical force of about several µN due to membrane vibrations and an acoustic radiation force of about tens of nN from the surrounding water. Consequently, this approach surpasses the efficiency of optical tweezers by effectively countering the viscous drag imposed by water and can be used to move thousands of particles on the membrane. The high power of the pulsed laser and the programmability of the DMD enhance the flexibility in particle manipulation. By integrating the benefits of optical and acoustic manipulation, this technique holds great promise for advancing large-scale manipulation, cell assembly, and drug delivery.

A voltage sensor with high resolution and large measurement range based on an optoelectronic oscillator (OEO) is proposed and experimentally demonstrated. The key component in the cavity to select the oscillating signal is a finite impulse response (FIR)-microwave photonic filter (MPF) which consists of a sinusoidal broadband optical signal, an unbalanced Mach-Zehnder interferometer (MZI), a section of dispersion compensating fiber, and a photodetector. The center frequency of the FIR-MPF is mainly determined by the free spectral range (FSR) of the FIR-MPF. In the lower arm of the MZI, a cylindrical piezoelectric ceramic (PZT) wrapped with a section of optical fiber acts as voltage sensing head. Due to the inverse piezoelectric effect of PZT, the variation of the voltage will cause radial deformation of the cylindrical PZT and then lead to the change of the FSR of the MZI, determining the shift of center frequency of FIR-MPF as well as the frequency of the oscillating signal of the OEO. Thus, by monitoring the shift of the oscillation frequency of the OEO using an electric spectrum analyzer or a digital signal processor, a high-speed interrogation and high-resolution voltage measurement can be realized. Additionally, in the proposed scheme, an infinite impulse response (IIR)-MPF consisting of a fiber ring resonator is cascaded with the FIR-MPF to ensure the single-mode oscillation of the OEO. The experimental results show that a total range of 1700 V voltage sensing from - 200 V to 1500 V is accomplished with the voltage sensitivity of 0.25 GHz/100 V and the resolution of 0.3 V. By adjusting the proportion of the length of single mode fiber between two branches of MZI, the impact of temperature can be greatly reduced. The proposed sensor offers advantages such as a large measurement range, high resolution, high-speed interrogation, and stability to temperature disturbances, making it highly suitable for sensing applications in smart grids.

Putrescine and cadaverine are significant volatile indicators used to assess the degree of food spoilage. Herein, we propose a micro-nano multi cavity structure for surface-enhanced Raman spectroscopy (SERS) to analyze the volatile gas putrescine and cadaverine in decomposing food. The MoS 2 nano-flowers are inserted into a PVDF micro-cavity through in-situ growth, followed by vacuum evaporation technology of Ag nanoparticles to form an Ag/MoS 2 nano-flower cavity/PVDF micron-bowl cavity (FIB) substrate. The micro-nano multi cavity structure can improve the capture capacity of both light and gas, thereby exhibiting high sensitivity (EF = 7.71 × 10 7 ) and excellent capability for gas detection of 2-naphthalenethiol. The SERS detections of the putrescine and cadaverine are achieved in the spoiled pork samples with the FIB substrate. Therefore, this substrate can provide an efficient, accurate, and feasible method for the specific and quantitative detection in the food safety field.

By effectively controlling the dipole-dipole interaction, we investigate the characteristics of the ground state of bright solitons in a spin-orbit coupled dipolar Bose-Einstein condensate. The dipolar atoms are trapped within a double-lattice which consists of a linear and a nonlinear lattice. We derive the motion equations of the different spin components, taking the controlling mechanisms of the dipole-dipole interaction into account. An analytical expression of dipole-dipole interaction is derived. By adjusting the dipole polarization angle, the dipole interaction can be adjusted from attraction to repulsion. On this basis, we study the generation and manipulation of the bright solitons using both the analytical variational method and numerical imaginary time evolution. The stability of the bright solitons is also analyzed and we map out the stability phase diagram. By adjusting the long-range dipole-dipole interaction, one can achieve manipulation of bright solitons in all aspects, including the existence, width, nodes, and stability. Considering the complexity of our system, our results will have enormous potential applications in quantum simulation of complex systems.

The accuracy of measuring the effective focal spot of the X-ray source directly affects the spatial resolution of computed tomography (CT) reconstructed images. This study proposes what we believe to be a novel approach to measure the effective focal spot based on the dynamic translation of light barrier using an accessible measuring device. This method discretizes the effective focal spot of the X-ray source into multiple subfocal spots with varying intensities and establishes a nonlinear model between the effective focal spot and measurement data. Measurement data are obtained by moving the light barrier to different positions using the electric displacement stage. The shape, size, and intensity distribution of the effective focal spot are determined by calculating the normalized weighting coefficients for each subfocal spot from measurement data. The measurement device is simple and easy to operate. Additionally, the obtained effective focal spot exhibits high accuracy, and a higher spatial resolution can be realized by reconstructing the CT images using the measured focal spot information. Numerical and real experiments validate the proposed method.

In this paper, we propose a feed-forward equalizer (FFE)-assisted simplified soft-output MLSE (sMLSE) by collaborating the maximum likelihood sequence estimation (MLSE) with soft-decision low-density-parity-check (LDPC) decoding. The simplified sMLSE results in undetermined log-likelihood ratio (LLR) magnitudes when the reserved level is less than or equal to the half of modulation order. This severely degrades the performance of soft-decision forward error correction (SD-FEC) decoding. In the FFE-assisted simplified sMLSE, we use the LLRs calculated from pre-set FFE to replace these undetermined LLRs of simplified sMLSE. Thus, the proposed method eliminates the SD-FEC decoding performance degradation resulted from simplification. We conduct experiments to transmit 184-Gb/s PAM-4 or 255-Gb/s PAM-8 signal in IM-DD system at C-band to evaluate the performance of the proposed sMLSE. The results show that the proposed sMLSE can effectively compensate for the degradation of LLR quality. For 255-Gb/s PAM-8 signal transmissions, the FFE-assisted simplified sMLSE achieves almost the same SD-FEC decoding performance as the conventional sMLSE but with 85% complexity reduction.

Clarifying the aberrations arising from freeform surfaces is of great significance for maximizing the potential of freeform surfaces in the design of optical systems. However, the current precision in calculating aberration contribution of freeform surface terms for non-zero field of view is insufficient, impeding the development of freeform imaging systems with larger field of view. This paper proposes a high-precision analysis of aberration contribution of freeform surface terms based on nodal aberration theory, particularly for non-zero field points. Accurate calculation formulas of aberrations generated by Zernike terms on freeform surface are presented. Design examples illustrate that the calculation error of the provided formulas is 78% less than that of conventional theoretical values. Building upon high-precision analysis, we propose an optimization method for off-axis freeform surface systems and illustrate its effectiveness through the optimization of an off-axis three-mirror system. This research extends the applicability of nodal aberration theory in aberration analysis, offering valuable insights for the optimal design and alignment of optical freeform systems.

We report on the continuous-wave (CW) and, for what we believe to be the first time, passively mode-locked (ML) laser operation of an Yb 3+ -doped YSr 3 (PO 4 ) 3 crystal. Utilizing a 976-nm spatially single-mode, fiber-coupled laser diode as pump source, the Yb:YSr 3 (PO 4 ) 3 laser delivers a maximum CW output power of 333 mW at 1045.8 nm with an optical efficiency of 55.7% and a slope efficiency of 60.9%. Employing a quartz-based Lyot filter, an impressive wavelength tuning range of 97 nm at the zero level was achieved in the CW regime, spanning from 1007 nm to 1104 nm. In the ML regime, incorporating a commercially available semiconductor saturable absorber mirror (SESAM) to initiate and maintain soliton-like pulse shaping, the Yb:YSr 3 (PO 4 ) 3 laser generated pulses as short as 61 fs at 1062.7 nm, with an average output power of 38 mW at a repetition rate of ∼66.7 MHz.

Optical diffraction tomography (ODT) is a promising label-free imaging method capable of quantitatively measuring the three-dimensional (3D) refractive index distribution of transparent samples. In recent years, partially coherent ODT (PC-ODT) has attracted increasing attention due to its system simplicity and absence of laser speckle noise. Quantitative phase imaging (QPI) technologies represented by Fourier ptychographic microscopy (FPM), differential phase contrast (DPC) imaging and intensity diffraction tomography (IDT) need to collect several or hundreds of intensity images, which usually introduce motion artifacts when shooting fast-moving targets, leading to a decrease in image quality. Hence, a quantitative real-time phase microscopy (qRPM) for extended depth of field (DOF) imaging based on 3D single-shot differential phase contrast (ssDPC) imaging method is proposed in this research study. qRPM incorporates a microlens array (MLA) to simultaneously collect spatial information and angular information. In subsequent optical information processing, a deconvolution method is used to obtain intensity stacks under different illumination angles in a raw light field image. Importing the obtained intensity stack into the 3D DPC imaging model is able to finally obtain the 3D refractive index distribution. The captured four-dimensional light field information enables the reconstruction of 3D information in a single snapshot and extending the DOF of qRPM. The imaging capability of the proposed qRPM system is experimental verified on different samples, achieve single-exposure 3D label-free imaging with an extended DOF for 160 µm which is nearly 30 times higher than the traditional microscope system.

The van der Waals (vdWs) heterostructures, with vertical layer stacking structure of various two-dimensional (2D) materials, maintain the reliable photonic characteristics while compensating the shortcomings of the participating individual components. In this work, we combine the less-studied multilayer tin selenide (SnSe 2 ) thin film with one of the traditional 2D materials, graphene, to fabricate the graphene-based vdWs optical switching element (Gr-SnSe 2 ) with superior broadband nonlinear optical response. The transient absorption spectroscopy (TAS) measurement results verify that graphene acts as the recombination channel for the photogenerated carrier in the Gr-SnSe 2 sample, and the fast recovery time can be reduced to hundreds of femtoseconds which is beneficial for the optical modulation process. The optical switching properties are characterized by the I-scan measurements, exhibiting a saturable energy intensity of 2.82 mJ·cm -2 (0.425 µJ·cm -2 ) and a modulation depth of 15.6% (22.5%) at the wavelength of 1030 nm (1980nm). Through integrating Gr-SnSe 2 with a cladding waveguide, high-performance picosecond Q-switched operation in the near-infrared (NIR) and mid-infrared (MIR) spectral regions are both achieved. This work experimentally demonstrates the great potential of graphene-based vdWs heterostructures for applications in broadband ultrafast photonics.

Single-photon light detection and ranging (LiDAR) is widely used to reconstruct 3D scenes. Nevertheless, depth and reflectivity maps obtained by single-photon detection usually suffer from noise problems. Threshold LiDAR techniques using photon-number-resolving detectors were proposed to suppress noise by filtering low photon numbers, but these techniques renounce multiple levels of information and could not be compatible when it comes to high-noise low-signal regime. In this manuscript, we propose a detection scheme which combines the noise suppression of threshold detection with the signal amplification of photon-number-resolving detectors to further enhance LiDAR performance. The enhancement attained is compared to single-photon and threshold detection schemes under a wide range of signal and noise conditions, in terms of signal-to-noise-ratio (SNR), detection rate and false alarm rate, which are key metrics for LiDAR. Extensive simulations and real-world experiments show that the proposed scheme can reconstruct better depth and reflectivity maps. These results enable the development of high-efficient and low-noise LiDAR systems.

Rydberg-state excitation of stretched model molecules subjected to near-infrared intense laser fields has been investigated based on a fully quantum model (QM) proposed recently and the numerical solutions of time-dependent Schrödinger equation (TDSE). Given the good agreement between QM and TDSE, it is found that, as the molecules are stretched, the electron tends to be trapped into low-lying Rydberg-states after its ionization from the core, which can be attributed to the shift of the ionization moments corresponding to maximum excitation populations. Moreover, the n-distribution is broadened for molecules with increasing internuclear distance, which results from the change of momentum distribution of emitted electrons. Analysis indicates that both of the above phenomena are closely related to the interference effect of electronic wave packets emitted from different nuclei. Our study provides a more comprehensive understanding of the molecular excitation in intense laser fields, as well as a means of possible applications to related experimental observations.

We propose and experimentally demonstrate what we believe to be a novel single-mode optoelectronic oscillator (OEO) with low frequency drift based on phase conjugation. The long-term frequency stabilization of the OEO is achieved by using photonic microwave phase-conjugate passive compensation. Besides, since there happens to be a nonlinear coupled double loop structure in the OEO, single-mode oscillation can be achieved. The experimental results show that the side mode suppression ratio (SMSR) of the radio frequency (RF) signal from the OEO at 9.93 GHz is enhanced from 5 dB to 68 dB after side mode suppression, and the maximum frequency drift within 600 s reduced from 1.51 ppm to 0.04 ppm, optimized by a factor of about 40. The OEO has a simple structure, no external injection, and the phase noise is not limited by the injected signal.

The sensors with a wide gas pressure detection range are urgently demanded in many industrial applications. Here, we propose a gas pressure sensor based on an all-solid open Fabry-Pérot interferometer, which is prepared by using optical contact bonding to ensure high structural strength and high-quality factor of 8.8 × 10 5 . The applied pressure induces a change in the refractive index of the air, leading to the shift of the resonant spectrum. The pressure is detected by calibrating this shift. The sensor exhibits a pressure sensitivity of 4.20 ± 0.01 nm/MPa in a pressure range of 0 to 10 MPa and has a minimum pressure resolution of 0.005 MPa. Additionally, it shows a lower temperature cross-sensitivity of -0.25 kPa/°C. These findings affirm that the sensor achieves high-sensitivity pressure sensing across a wide detection range. Moreover, owing to its exceptional mechanical strength, it holds great promise for applications in harsh environments, such as high temperature and high pressure.

Tri-comb and multi-comb techniques could enable many advanced measurement applications beyond the reach of traditional dual-comb schemes. However, the sophisticated and bulky control systems of the conventional schemes based on three comb lasers render them impractical for many potential applications. Like their dual-comb counterparts, tri-comb and multi-comb lasers are being investigated as attractive alternatives. In contrast to previous dual-comb lasers using only one multiplexing dimension of optical pulses, this work simultaneously leverages multiplexing methods in three physical dimensions, i.e. wavelength, polarization, and direction, to generate triple to quadruple asynchronous pulse trains in a bidirectional mode-locked fiber laser. Because of the unique cavity structure studied here, both wavelength-multiplexed and polarization-multiplexed dual-comb generation from a completely shared-cavity and wavelength/polarization-multiplexed multi-comb generation from a bidirectional partially shared-cavity are achieved. Good relative stability among the generated combs of the fiber laser is demonstrated, as well as proof-of-concept dual-comb spectroscopy measurements, which validates the mutual coherence between the combs. The analysis of the experimental results further reveals interesting performance comparisons between combs from different multiplexing schemes, thanks to the special laser design used here that allows a side-by-side dual-comb demonstrations from different combinations of outputs from the same laser. Our investigation could facilitate multi-comb generation based on one light source for field-deployable multi-comb applications.

This article proposes and numerically demonstrates a widely tunable on-chip Raman soliton source based on a cascaded As 2 Se 3 waveguide. The cascaded sub-waveguides (input and output) with varying widths act as nonlinear devices, while a tapered waveguide is arranged between them to achieve low-loss transmission. The input waveguide provides anomalous dispersion in the near-infrared band, thereby enabling the 1.96 µm source for Raman soliton self-frequency shift (SSFS) pumping. The output waveguide exhibits large anomalous dispersion and good mode confinement in the mid-infrared band thus supporting further SSFS process. A 2.29∼4.57 µm tunable Raman source is theoretically realized in this on-chip platform. This work presents a simple and easy-to-implement strategy to extend the tuning range of on-chip sources. Notably, to the best of our knowledge, this is the first demonstration of the cascading strategy for SSFS process in an on-chip platform. The proposed tunable source has great potential in integrated spectroscopy, gas sensing, and LiDAR applications.

The Brewster effect has been previously reported as an essential mechanism for terahertz (THz) wave sensing application. However, generally in a sensing application, a complex rotation apparatus is required for detecting the slight change in Brewster angle. Here, we propose a graphene-based Brewster angle device operating at a specific terahertz frequency capable of sensing the refractive index at a fixed incident angle. In other words, our sensing device could avoid the impact of Brewster angle shift and eliminate the need for high-precision rotating equipment, which is usually required in traditional sensing applications. The conversion from the refractive index to a Volt-level detectable voltage roots from the tunability of graphene's Fermi level in the external electrical field. A linear correlation between the output voltage and the background refractive index is observed and theocratically analyzed. Furthermore, we present the improvement of our device in terms of sensing range and sensitivity by adjusting the permittivity of the dielectric substrate. As a demonstration of our proposed device, a detection range of 1.1-2.4 and a sensitivity of 20.06 V/RIU for refractive index is achieved on a high-resistance silicon substrate operating at 0.3 THz.

Multi-core fiber based on space division multiplexing technology provides a practical solution to achieve multi-channel and high-capacity signal transmission. However, long-distance and error-free transmission remains challenging due to the presence of inter-core crosstalk within the multi-core fiber. Here, we propose and prepare a novel trapezoid-index thirteen-core single-mode fiber to solve the problems that MCF has large inter-core crosstalk and the transmission capacity of single-mode fiber approaches the upper limit. The optical properties of thirteen-core single-mode fiber are measured and characterized by experimental setups. The inter-core crosstalk of the thirteen-core single-mode fiber is less than -62.50 dB/km at 1550 nm. At the same time, each core can transmit signals at a data rate of 10 Gb/s and achieve error-free signal transmission. The prepared optical fiber with a trapezoid-index core provides a new and feasible solution for reducing inter-core crosstalk, which can be loaded into current communication systems and applied in large data centers.

Maximum likelihood sequence estimation (MLSE) is the optimal signal sequence detection that can remove the inter-symbol interference (ISI). However, we find that the MLSE causes burst consecutive errors alternating between +2 and -2 in M-ary pulse amplitude modulation (PAM-M) IM/DD systems with large ISI. In this paper, we propose to use precoding to suppress the burst consecutive errors resulted from MLSE. A 2 M modulo operation is employed to guarantee that the probability distribution as well as the peak-to-average power ratio (PAPR) of encoded signal remain unchanged. After the receiver-side MLSE, the decoding process that involves adding the current MLSE output to the previous one and applying a 2 M modulo is implemented to break the burst consecutive errors. We conduct experiments to transmit 112/150-Gb/s PAM-4 or beyond 200-Gb/s PAM-8 signals at C-band to investigate the performance of the proposed MLSE integrated with precoding. The results show that the precoding can break burst errors effectively. For 201-Gb/s PAM-8 signal transmission, the precoding MLSE can achieve 1.4-dB receiver sensitivity gain and reduce the maximum length of burst consecutive errors from 16 to 3.

The inter-core crosstalk (IC-XT) of multi-core fiber (MCF) limits the capacity of space division multiplexing system (SDM) fundamentally. We develop a closed-form expression of the magnitude of IC-XT for various types of signals, which can well explain the mechanism of different fluctuation behaviors of the real-time short-term average crosstalk (STAXT) and bit error ratio (BER) for the optical signals with and without strong optical carrier. The experimental verifications with the real-time measurement of the BER and outage probability in a 7 × 10-Gb/s SDM system agree well with the proposed theory and confirm that the unmodulated optical carrier plays a substantial role in fluctuation of BER. The range of fluctuation can be reduced by 3 orders of magnitude for the optical signal without optical carrier. We also investigate the effect of IC-XT in a long-haul transmission system based on a recirculating 7-core fiber loop and develop a frequency-domain IC-XT measurement technique. Longer transmission distance is shown to have a narrower BER fluctuation range, since IC-XT is no longer the only dominant factor on transmission performance.

The resolution of traditional fiber bundle imaging is usually limited by the density and the diameter of the fiber cores. To improve the resolution, compression sensing was introduced to resolve multiple pixels from a single fiber core, but current methods have the drawbacks of excessive sampling and long reconstruction time. In this paper, we present, what we believe to be, a novel block-based compressed sensing scheme for fast realization of high-resolution optic fiber bundle imaging. In this method, the target image is segmented into multiple small blocks, each of which covers the projection area of one fiber core. All block images are independently and simultaneously sampled and the intensities are recorded by a two-dimensional detector after they are collected and transmitted through corresponding fiber cores. Because the size of sampling patterns and the sampling numbers are greatly reduced, the reconstruction complexity and reconstruction time are also decreased. According to the simulation analysis, our method is 23 times faster than the current compressed sensing optical fiber imaging for reconstructing a fiber image of 128 × 128 pixels, while the sampling number is only 0.39%. Experiment results demonstrate that the method is also effective for reconstructing large target images and the number of sampling does not increase with the size of the image. Our finding may provide a new idea for high-resolution real-time imaging of fiber bundle endoscope.

An all-fiber orthogonal-polarized white-noise-modulated laser (AOWL) for short-coherence dynamic interferometry is proposed. Short-coherence laser is achieved by current modulating of a laser diode with the band-limited white noise. A pair of orthogonal-polarized lights with adjustable delay for short-coherence dynamic interferometry are output by the all-fiber structure. In the non-common-path interferometry, the AOWL can significantly suppress the interference signal clutter with 73% side lobe suppression ratio, that improves the positioning accuracy of zero optical path difference. The wavefront aberrations of a parallel plate are measured with the AOWL in the common-path dynamic interferometers, avoiding the fringe crosstalk.

A grating lobe-free silicon optical phased array with large field of view is demonstrated. Antennas with periodically bending modulation are spaced at half wavelength or less. The experimental results show that the crosstalk between adjacent waveguides is negligible at 1550 nm wavelength. Additionally, to reduce the optical reflection caused by the sudden change of refractive index at the output antenna of the phased array, tapered antennas are added to the output end face so that more light will be coupled into the free space. The fabricated optical phased array shows a field of view of 120° without any grating lobes.

We propose a physical scheme to study the formation of optical soliton molecules (SMs), consisting of two solitons bound together with a π-phase difference, and the scattering of SMs by a localized parity-time ( P T )-symmetric potential. In order to stabilize SMs, we apply an additional space-dependent magnetic field to introduce a harmonic trapping potential for the two solitons and balance the repulse interaction induced by the π-phase difference between them. On the other hand, a localized complex optical potential obeying P T symmetry can be created through an incoherent pumping and spatial modulation of the control laser field. We investigate the scattering of optical SMs by the localized P T -symmetric potential, which exhibits evident asymmetric behavior and can be actively controlled by changing the incident velocity of SMs. Moreover, the P T symmetry of the localized potential, together with the interaction between two solitons of the SM, can also have a significant effect on the SM scattering behavior. The results presented here may be useful for understanding the unique properties of SMs and have potential applications in optical information processing and transmission.

With the advances in the field of ultrafast photonics occurring so fast, the demand for optical modulation devices with high performance and soliton lasers which can realize the evolution of multiple soliton pulses is gradually increasing. Nevertheless, saturable absorbers (SAs) with appropriate parameters and pulsed fiber lasers which can output abundant mode-locking states still need to be further explored. Due to the special band gap energy values of few-layer indium selenide (InSe) nanosheets, we have prepared a SA based on InSe on a microfiber by optical deposition. In addition, we demonstrate that our prepared SA possesses a modulation depth and saturable absorption intensity about 6.87% and 15.83 MW/cm 2 , respectively. Then, multiple soliton states are obtained by dispersion management techniques, including regular solitons, and second-order harmonic mode-locking solitons. Meanwhile, we have obtained multi-pulse bound state solitons. We also provide theoretical basis for the existence of these solitons. The results of the experiment show that the InSe has the potential to be an excellent optical modulator because of its excellent saturable absorption properties. This work also is important for improving the understanding and knowledge of InSe and the output performance of fiber lasers.

For a partially coherent Bessel-Gaussian (PCBG) vortex beam, information regarding the topological charge (TC) is hidden in the phase of the cross-spectral density (CSD) function. We theoretically and experimentally confirmed that during free-space propagation, the number of coherence singularities is equal to the magnitude of the TC. In contrast to the Laguerre-Gaussian vortex beam, this quantitative relationship only holds for the case with an off-axis reference point for the PCBG vortex beam. The phase winding direction is determined by the sign of the TC. We developed a scheme for CSD phase measurement of PCBG vortex beams and verified the aforementioned quantitative relationship at different propagation distances and coherence widths. The findings of this study may be useful for optical communications.