Search

All-fiber digital heterodyne interferometry is a laser metrology technique employing pseudo-random codes phase modulated onto an optical carrier signal. In this heterodyne interferometer system, the optical signal includes signal reflected and transmitted from the sample, respectively. Compared with the conventional heterodyne interferometry, this enhanced optical system has much higher measurement sensitivity, and can distinguish the signal which reflected from the front and the rear surface of the sample. Analysis and simulation for the digital heterodyne interferometry are presented. It takes approximately 4 s to scan the whole surface with the diameter of 300 mm. The thickness profile of the sample is obtained in the experiment. The discussion about the experiment is given finally.

This paper describes a novel fiber-coupled heterodyne interferometer using a micro-electro-mechanical system (MEMS) mirror and an f-theta lens. In this interferometer system, the cross-polarized laser beams operating at 2 μm with the frequency difference of 100 kHz are introduced by means of the two acousto-optic modulators (AOM). The sample with diameter of 300 mm is uniformly scanned by the 1 mm laser beam with the help of the combined optical scanning configuration, a MEMS mirror and an f-theta lens. The output intermediate signal from the two channels, reference channel and the measurement channel, are processed in the 12 bit analog-to-digital (A/D) process system. Details of our interferometer scheme are discussed.