Search

Optical properties of electrochromic materials can be controlled by the application of an electric field allowing recent development of new applications such as smart windows technology for indoor climate control and energy conservation. We report the fabrication of a single-walled nanotube (SWNT) thin film based electro-optical modulator controlled by ionic liquid polarization in which the active electrochromic layer is made of a film of semiconducting (SC-) SWNTs and the counter-electrode is composed of a film of metallic (MT-) SWNTs. Optimization of this electro-optical cell allows the operations with an optical modulation depth of 3.7 dB and a response time in the millisecond range, which is thousands of times faster than typical electrolyte-controlled devices. In addition, a dual electro-optical device was built utilizing electro-optically active SC-SWNT films for each electrode that allowed increasing modulation depth of 6.7 dB while preserving the speed of the response.

Chemical functionalization is a promising route to band gap engineering of graphene. We chemically grafted nitrophenyl groups onto exfoliated single-layer graphene sheets in the form of substrate-supported or free-standing films. Our transport measurements demonstrate that nonsuspended functionalized graphene behaves as a granular metal, with variable range hopping transport and a mobility gap ∼0.1 eV at low temperature. For suspended graphene that allows functionalization on both surfaces, we demonstrate tuning of its electronic properties from a granular metal to a semiconductor in which transport occurs via thermal activation over a transport gap ∼80 meV from 4 to 300 K. This noninvasive and scalable functionalization technique paves the way for CMOS-compatible band gap engineering of graphene electronic devices.

We used conductive nanotube films as substrates with which we could systematically vary the conductance to see how this property affects neuronal growth. Here we show that nanotube substrates in a narrow range of conductivity promote the outgrowth of neurites with a decrease in the number of growth cones as well as an increase in cell body area, while at higher conductance these effects disappear.

We report the use of chemically-functionalized water soluble single-walled carbon nanotube (SWNT) graft copolymers to inhibit endocytosis. The graft copolymers were prepared by the functionalization of SWNTs with poly-ethylene glycol. When added to the culturing medium, these functionalized water soluble SWNTs were able to increase the length of various neuronal processes, neurites, as previously reported. Here we have determined that SWNTs are able to block stimulated membrane endocytosis in neurons, which could then explain the previously noted extended neurite length.

We use the suspended single-walled carbon nanotube (SWNT) thin film technology to assemble the first prototype of an integrated optoelectronic SWNT device, a SWNT optocoupler in which a SWNT emitter and a SWNT detector couple two electrical circuits by the transmission of a signal through the optical channel. Our experiments show that the integrated SWNT emitter/SWNT detector is an ideal couple in which the broadband wavelength character of the emission matches the broadband detection capabilities.

We demonstrate ionic liquid (IL) gating of suspended few-layer MoS2 transistors, where ions can accumulate on both exposed surfaces. Upon application of IL, all free-standing samples consistently display more significant improvement in conductance than substrate-supported devices. The measured IL gate coupling efficiency is up to 4.6 × 10(13) cm(-2) V(-1). Electrical transport data reveal contact-dominated electrical transport properties and the Schottky emission as the underlying mechanism. By modulating IL gate voltage, the suspended MoS2 devices display metal-insulator transition. Our results demonstrate that more efficient charge induction can be achieved in suspended two-dimensional (2D) materials, which with further optimization, may enable extremely high charge density and novel phase transition.

UV illumination of semiconducting single wall carbon nanotubes (SWNTs) results in a substantial increase of the intensity of the first interband transition (S11) followed by dark or IR light induced restoration of the initial intensity. The intensity of the S11 transition could also be modulated by light-induced reversible conversion of spiropyran molecules attached to SWNTs from the spiro conformation to its merocyanine form. Both surface-located monomeric and end-located aggregated merocyanines were found in UV illuminated spiropyran-SWNT supramolecular conjugates.

Single-walled carbon nanotube (SWNT) reinforced polymer composite membranes have been fabricated using the electrospinning technique. Nanofibers with a diameter in the range 50−100 nm were obtained by electrospinning SWNT-filled polystyrene composites. TEM observations revealed incorporation of small SWNT bundles oriented parallel to the nanofiber axis. As-prepared (AP) and ester (EST) functionalized SWNTs have been electrospun with polyurethane (PU) to demonstrate the effect of the chemical functionalization of SWNTs on the mechanical properties of SWNT-reinforced composites. The tensile strength of EST-SWNT-PU membranes is enhanced by 104% as compared to electrospun pure polyurethane membranes, while an increase of only 46% was achieved incorporating AP−SWNT in the polyurethane matrix. The tangent moduli of AP- and EST-SWNT-PU membranes were found to be respectively 215% and 250% higher than the control polyurethane membranes.

The use of multiwalled carbon nanotubes as a platinum support for proton exchange membrane fuel cells has been investigated as a way to reduce the cost of fuel cells through an increased utilization of platinum. Carbon nanotubes were selectively grown directly on the carbon paper by chemical vapor deposition with electrodeposited cobalt catalyzing the growth of the carbon nanotubes. The as-prepared carbon nanotubes were employed as the support for the subsequent platinum catalyst, which is electrodeposited on the carbon nanotubes. Physicochemical and electrochemical characterizations were conducted to identify the morphologies of the cobalt, the carbon nanotubes, and the electrodeposited platinum on the carbon nanotubes. The feasibility of a fuel cell using the carbon nanotube-based electrodes was demonstrated.

We report a rapid, quantitative procedure for the evaluation of the carbonaceous purity of bulk quantities of as-prepared single-walled carbon nanotube (SWNT) soot by the utilization of solution-phase near-IR spectroscopy. The procedure starts with two steps of homogenization followed by solution/dispersion spectroscopy of a representative part of the bulk sample. The purity is evaluated against a reference sample by utilizing the region of the second interband transition (S22) for semiconducting SWNTs. The procedure is found to be capable of reliably analyzing the carbonaceous purity of a 10-g batch of SWNTs produced by the electric arc discharge method to within 3%.

The formation of covalent bonds to single-walled carbon nanotube (SWNT) or graphene surfaces usually leads to a decrease in the electrical conductivity and mobility as a result of the structural rehybridization of the functionalized carbon atoms from sp(2) to sp(3). In the present study, we explore the effect of metal deposition on semiconducting (SC-) and metallic (MT-) SWNT thin films in the vicinity of the percolation threshold and we are able to clearly delineate the effects of weak physisorption, ionic chemisorption with charge transfer, and covalent hexahapto (η(6)) chemisorption on these percolating networks. The results support the idea that for those metals capable of forming bis-hexahapto-bonds, the generation of covalent (η(6)-SWNT)M(η(6)-SWNT) interconnects provides a conducting pathway in the SWNT films and establishes the transition metal bis-hexahapto organometallic bond as an electronically conjugating linkage between graphene surfaces.

Alterations in glial fibrillary acidic protein (GFAP) levels accompany the changes in the morphology and proliferation of astrocytes induced by colloidal solutes and films of carbon nanotubes (CNTs). To determine if GFAP is required for the effects of CNTs on astrocytes, we used astrocytes isolated from GFAP null mice. We find that selected astrocytic changes induced by CNTs are mediated by GFAP, i.e., perimeter, shape, and cell death for solutes, and proliferation for films.

The electronic structure of single-walled carbon nanotubes (SWNTs) is investigated by transmission spectroscopy of thin films. Hole-doping of SWNTs, as a result of purification, leads to free carrier absorption in the far-IR spectral range. Thermal cycling de-dopes SWNTs, transferring spectral weight from the far-IR to the interband transitions in the near-IR spectral range. After the nanotubes are de-doped, a diameter dependent peak in the far-IR is apparent at ∼100 cm-1, which we ascribe to a curvature induced energy gap in the DOS of nonarmchair metallic SWNTs.

We used single-walled carbon nanotube (CNT) films to modulate the morpho-functional and proliferative characteristics of astrocytes. When plated on the CNT films of various thicknesses, astrocytes grow bigger and rounder in shape with a decrease in the immunoreactivity of glial fibrillary acidic protein along with an increase in their proliferation, changes associated with the dedifferentiation of astrocytes in culture. Thus, CNT films, as a coating material for electrodes used in brain machine interface, could reduce astrogliosis around the site of implantation.

We report the use of chemically functionalized water-soluble single-walled carbon nanotubes (ws-SWCNTs) for the modulation of morpho-functional characteristics of astrocytes. When added to the culturing medium, ws-SWCNTs were able to make astrocytes larger and stellate/mature, changes associated with the increase in glial fibrillary acidic protein immunoreactivity. Thus, ws-SWCNTs could have more beneficial effects at the injury site than previously thought; by affecting astrocytes, they could provide for a more comprehensive re-establishment of the brain computational power.

In order to engineer a band gap into graphene, covalent bond-forming reactions can be used to change the hybridization of the graphitic atoms from sp(2) to sp(3), thereby modifying the conjugation length of the delocalized carbon lattice; similar side-wall chemistry has been shown to introduce a band gap into metallic single-walled carbon nanotubes. Here we demonstrate that the application of such covalent bond-forming chemistry modifies the periodicity of the graphene network thereby introducing a band gap (∼0.4 eV), which is observable in the angle-resolved photoelectron spectroscopy of aryl-functionalized graphene. We further show that the chemically-induced changes can be detected by Raman spectroscopy; the in-plane vibrations of the conjugated π-bonds exhibit characteristic Raman spectra and we find that the changes in D, G, and 2D-bands as a result of chemical functionalization of the graphene basal plane are quite distinct from that due to localized, physical defects in sp(2)-conjugated carbon.

We report a comprehensive study of the gate-induced electromodulated transmittance of infrared light by single-walled carbon nanotube (SWNT) thin films. The observed electromodulation is significantly enhanced by utilizing large diameter SWNTs, increasing the ratio of semiconducting to metal SWNTs, and by decreasing the SWNT film thickness. The amplitude of the effect reported herein ( approximately 7%) is more than an order of magnitude larger than in previous SWNT thin film solid state devices.

We introduce a new technique for measurement of the thermal conductivity of ultrathin films of single-walled carbon nanotubes (SWNTs) utilizing IR radiation as heat source and the SWNT film as thermometer. The technique is applied to study the temperature dependence of the thermal conductivity of an as-prepared SWNT film obtained in the electric arc discharge process and a film of purified SWNTs prepared by vacuum filtration. The interplay between thermal and electrical transport in SWNT networks is analyzed in relation to the type of intertube junctions and the possibility of optimizing the thermal and electrical properties of SWNT networks for specific applications is discussed.

We explored the use of carbon nanotubes (CNTs) as suitable scaffold materials for osteoblast proliferation and bone formation. With the aim of controlling cell growth, osteosarcoma ROS 17/2.8 cells were cultured on chemically modified single-walled (SW) and multiwalled (MW) CNTs. CNTs carrying neutral electric charge sustained the highest cell growth and production of plate-shaped crystals. There was a dramatic change in cell morphology in osteoblasts cultured on MWNTs, which correlated with changes in plasma membrane functions.