Search

Lithium-sulfur (Li-S) batteries constitute promising next-generation energy storage devices due to the ultrahigh theoretical energy density of 2600 Wh kg-1. However, the multiphase sulfur redox reactions with sophisticated homogeneous and heterogeneous electrochemical processes are sluggish in kinetics, thus requiring targeted and high-efficient electrocatalysts. Herein, a semi-immobilized molecular electrocatalyst is designed to tailor the characters of the sulfur redox reactions in working Li-S batteries. Specifically, porphyrin active sites are covalently grafted onto conductive and flexible polypyrrole linkers on graphene current collectors. The electrocatalyst with the semi-immobilized active sites exhibits homogeneous and heterogeneous functions simultaneously, performing enhanced redox kinetics and a regulated phase transition mode. The efficiency of the semi-immobilizing strategy is further verified in practical Li-S batteries that realize superior rate performances and long lifespan as well as a 343 Wh kg-1 high-energy-density Li-S pouch cell. This contribution not only proposes an efficient semi-immobilizing electrocatalyst design strategy to promote the Li-S battery performances but also inspires electrocatalyst development facing analogous multiphase electrochemical energy processes.

Lithium-sulfur (Li-S) batteries have great potential as high-energy-density energy storage devices. Electrocatalysts are widely adopted to accelerate the cathodic sulfur redox kinetics. The interactions among the electrocatalysts, solvents, and lithium salts significantly determine the actual performance of working Li-S batteries. Herein, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), a commonly used lithium salt, is identified to aggravate surface gelation on the MoS

Adenosine 5'-triphosphate (ATP) is a central extracellular signaling agent involved in various physiological and pathological processes. However, precise measurements of the temporal and spatial components of ATP dynamics are lacking due primarily to the limitations of available methods for ATP detection. Here, we report on the first effort to design a self-phosphorylating DNAzyme (SPDz) sensor for fluorescence imaging of ATP. In response to ATP, SPDz sensors exhibit subsecond response kinetics, extremely high specificity, and micromolar affinities. In particular, we demonstrate cell-surface-anchored SPDz sensors for fluorescence imaging of both stress-induced endogenous ATP release in astrocytes and mechanical stimulation-evoked ATP release at the single-cell level. We also validated their utility for visualizing the rapid dynamic properties of ATP signaling upon electrical stimulation in astrocytes. Thus, SPDz sensors are robust tools for monitoring ATP signaling underlying diverse cellular processes.

Geometrically frustrated systems play an important role in studying new physical phenomena and unconventional thermodynamics. Charge ordered defect pyrochlores AM2+M3+F6 offer a convenient platform for probing the interplay between electron distribution over M2+ and M3+ sites and structural distortions; however, they are limited to compounds with M2+/3+ = V, Fe, Ni, and Cu due to difficulties in the simultaneous stabilization of other 3d elements in the +2 and +3 oxidation states. Herein, we employ Cl- anions under hydrothermal conditions for the mild reduction of Mn2O3 in concentrated HF to obtain the CsMn2+Mn3+F6 composition as a phase pure sample and study its properties. The magnetism of CsMn2F6 was characterized by measuring the magnetic susceptibility and isothermal magnetization data, and a magnetic transition to a canted antiferromagnet state was found at 24.1 K. We determined the magnetic structure of CsMn2F6 using powder neutron diffraction, which revealed successive long-range ordering of the Mn2+ and Mn3+ sites that is accompanied by a second transition. The role and strength of magnetic exchange interactions were characterized using DFT calculations.

Lithium (Li) metal anodes are attractive for high-energy-density batteries. Dead Li is inevitably generated during the delithiation of deposited Li based on a conversion reaction, which severely depletes active Li and electrolyte and induces a short lifespan. In this contribution, a successive conversion-deintercalation (CTD) delithiation mechanism is proposed by manipulating the overpotential of the anode to restrain the generation of dead Li. The delithiation at initial cycles is solely carried out by a conversion reaction of Li metal. When the overpotential of the anode increases over the delithiation potential of lithiated graphite after cycling, a deintercalation reaction is consequently triggered to complete a whole CTD delithiation process, largely reducing the formation of dead Li due to a highly reversible deintercalation reaction. Under practical conditions, the working batteries based on a CTD delithiation mechanism maintain 210 cycles with a capacity retention of 80% in comparison to 110 cycles of a bare Li anode. Moreover, a 1 Ah pouch cell with a CTD delithiation mechanism operates for 150 cycles. The work ingeniously restrains the generation of dead Li by manipulating the delithiation mechanisms of the anode and contributes to a fresh concept for the design of practical composite Li anodes.

The stability of a battery is strongly dependent on the feature of solid electrolyte interphase (SEI). The electrical double layer forms prior to the formation of SEI at the interface between the Li metal anode and the electrolyte. The fundamental understanding on the regulation of the SEI structure and stability on Li surface through the structure of the electrical double layer is highly necessary for safe batteries. Herein, the interfacial chemistry of the SEI is correlated with the initial Li surface adsorption electrical double layer at the nanoscale through theoretical and experimental analysis. Under the premise of the constant solvation sheath structure of Li+ in bulk electrolyte, a trace amount of lithium nitrate (LiNO3) and copper fluoride (CuF2) were employed in electrolytes to build robust electric double layer structures on a Li metal surface. The distinct results were achieved with the initial competitive adsorption of bis(fluorosulfonyl)imide ion (FSI-), fluoride ion (F-), and nitrate ion (NO3-) in the inner Helmholtz plane. As a result, Cu-NO3- complexes are preferentially adsorbed and reduced to form the SEI. The modified Li metal electrode can achieve an average Coulombic efficiency of 99.5% over 500 cycles, enabling a long lifespan and high capacity retention of practical rechargeable batteries. The as-proposed mechanism bridges the gap between Li+ solvation and the adsorption about the electrode interface formation in a working battery.

Geometrically frustrated systems play an important role in studying new physical phenomena and unconventional thermodynamics. Charge ordered defect pyrochlores

A family of proteases called caspases mediate apoptosis signaling in animals. We report a GFP-based fluorogenic protease reporter, dubbed “FlipGFP”, by flipping a beta strand of the GFP. Upon protease activation and cleavage, the beta strand is restored, leading to reconstitution of the GFP and fluorescence. FlipGFP-based TEV protease reporter achieves 100-fold fluorescence change. A FlipGFP-based executioner caspase reporter visualized apoptosis in live zebrafish embryos with spatiotemporal resolution. FlipGFP also visualized apoptotic cells in the midgut of Drosophila. Thus, the FlipGFP-based caspase reporter will be useful for monitoring apoptosis during animal development and for designing reporters of proteases beyond caspases. The design strategy can be further applied to a red fluorescent protein for engineering a red fluorogenic protease reporter.

Sulfur and selenium occupy a distinguished position in biology owing to their redox activities, high nucleophilicity, and acyl transfer capabilities. Thiolated/selenolated amino acids, including cysteine, selenocysteine, and their derivatives, play critical roles in regulating the conformation and function of proteins and serve as an important motif for peptide design and bioconjugation. Unfortunately, a general and concise method to attain enantiopure β-thiolated/selenolated amino acids remains an unsolved problem. Herein, we present a photoredox-catalyzed asymmetric method for the preparation of enantiopure β-thiolated/selenolated amino acids using a simple chiral auxiliary, which controls the diastereoselectivity of the key alkylation step and acts as an orthogonal protecting group in the subsequent peptide synthesis. Our protocol can be used to prepare a wide range of β-thiolated/selenolated amino acids on a gram scale, which would otherwise be difficult to obtain using conventional methods. The effect of our chemistry was further highlighted and validated through the preparation of a series of peptidyl thiol/selenol analogues, including cytochrome c oxidase subunit protein 7C and oxytocin.

Creating high-density durable bifunctional active sites in an air electrode is essential but still challenging for a long-life rechargeable zinc-air battery with appealing power density. Herein, we discover a general strategy mediated by metastable rock salt oxides for achieving high-density well-defined transition-metal nanocrystals encapsulated in N-doped carbon shells (M@NC) which are anchored on a substrate by a porous carbon network as highly active and durable bifunctional catalytic sites. Small-size (15 ± 5 nm) well-dispersed Co2Fe1@NC in a high density (metal loading up to 54.0 wt %) offers the zinc-air battery a record power density of 423.7 mW cm-2. The dual protection from the complete graphitic carbon shells and the anchoring of the outer carbon network make Co2Fe1@NC chemically and mechanically durable, giving the battery a long cycling life. Systematic in-situ temperature-dependent characterizations as well as DFT modeling rationalize the rock salt oxide-mediated process and its indispensable role in achieving high-density nanosized M@NC. These findings open up opportunities for designing efficient electrocatalysts for high-performance Zn-air batteries and diverse energy devices.

In floating catalyst chemical vapor deposition (FC-CVD), tuning chirality distribution and obtaining narrow chirality distribution of single-walled carbon nanotubes (SWCNTs) is challenging. Herein, by introducing various amount of CO2 in FC-CVD using CO as a carbon source, we have succeeded in directly synthesizing SWCNT films with tunable chirality distribution as well as tunable colors. In particular, with 0.25 and 0.37 volume percent of CO2, the SWCNT films display green and brown colors, respectively. We ascribed various colors to suitable diameter and narrow chirality distribution of SWCNTs. Additionally, by optimizing reactor temperature, we achieved much narrower (n,m) distribution clustered around (11,9) with extremely narrow diameter range (>98% between 1.2 and 1.5 nm). We propose that CO2 may affect CO disproportionation and nucleation modes of SWCNTs, resulting in SWCNTs' various diameter ranges. Our work could provide a new route for high-yield and direct synthesis of SWCNTs with narrow chirality distribution and offer potential applications in electronics, such as touch sensors or transistors.

The endoplasmic reticulum (ER) is responsible for the synthesis and folding of a large number of proteins, as well as intracellular calcium regulation, lipid synthesis, and lipid transfer to other organelles, and is emerging as a target for cancer therapy. However, strategies for selectively targeting the ER of cancer cells are limited. Here we show that enzymatically generated crescent-shaped supramolecular assemblies of short peptides disrupt cell membranes and target ER for selective cancer cell death. As revealed by sedimentation assay, the assemblies interact with synthetic lipid membranes. Live cell imaging confirms that the assemblies impair membrane integrity, which is further supported by lactate dehydrogenase (LDH) assays. According to transmission electron microscopy (TEM), static light scattering (SLS), and critical micelle concentration (CMC), attaching an l-amino acid at the C-terminal of a d-tripeptide results in the crescent-shaped supramolecular assemblies. Structure-activity relationship suggests that the crescent-shaped morphology is critical for interacting with membranes and for controlling cell fate. Moreover, fluorescent imaging indicates that the assemblies accumulate on the ER. Time-dependent Western blot and ELISA indicate that the accumulation causes ER stress and subsequently activates the caspase signaling cascade for cell death. As an approach for in situ generating membrane binding scaffolds (i.e., the crescent-shaped supramolecular assemblies), this work promises a new way to disrupt the membrane and to target the ER for developing anticancer therapeutics.

Self-healing capability helps biological systems to maintain their survivability and extend their lifespan. Similarly, self-healing is also beneficial to next-generation secondary batteries because high-capacity electrode materials, especially the cathodes such as oxygen or sulfur, suffer from shortened cycle lives resulting from irreversible and unstable phase transfer. Herein, by mimicking a biological self-healing process, fibrinolysis, we introduced an extrinsic healing agent, polysulfide, to enable the stable operation of sulfur microparticle (SMiP) cathodes. An optimized capacity (∼3.7 mAh cm–2) with almost no decay after 2000 cycles at a high sulfur loading of 5.6 mg(S) cm–2 was attained. The inert SMiP is activated by the solubilization effect of polysulfides whereas the unstable phase transfer is mediated by mitigated spatial heterogeneity of polysulfides, which induces uniform nucleation and growth of solid compounds. The comprehensive understanding of the healing process, as well as of the spat...

We report on a new family of argyrodite lithium superionic conductors, as solid solutions Li6+xMxSb1–xS5I (M = Si, Ge, Sn), that exhibit superionic conductivity. These represent the first antimony ...

The new ion-exchange oxy-sulfide material has a three-dimensional open framework comprising the pseudo-T4 supertetrahedral [In4Sn16O10S34](12-) cluster. This material has large pores and is a fast ion exchanger. It exhibits high selectivity in sequestering heavy metal ions from aqueous solutions including solutions containing heavy concentrations of sodium, calcium, ammonium, magnesium, zinc, carbonate, phosphate, and acetate ions. Moreover, the ion-exchange efficiency in competitive ion-exchange experiments involving mixtures of metal ions is significantly higher than for solutions of single metal ions.

Quests for advanced functionalities in metal-organic frameworks (MOFs) inevitably encounter increasing complexity in their tailored framework architectures, accompanied by heightened challenges with their geometric design. In this paper, we demonstrate the feasibility of rationally exploiting topological prediction as a blueprint for predesigned MOFs. A new triangular frusta secondary building unit (SBU), {Zn4(tz)3}, was bridged by three TDC(2-) fragments to initially form a trigonal prismatic node, {Zn8(tz)6(TDC)3} (Htz = 1H-1,2,3-triazole and H2TDC = 2,5-thiophenedicarboxylic acid). Furthermore, the trigonal prism unit can be considered as a double SBU derived from triply bound triangular frusta. By considering theoretical derived nets for linking this trigonal-prismatic node with ditopic, tritopic, and tetratopic linkers, we have synthesized and characterized a new family of MOFs that adopt the decorated lon, jea, and xai nets, respectively. Pore sizes have also been successively increased within TPMOF-n family, which facilitates heterogeneous biomimetic catalysis with Fe-porphyrin-based TPMOF-7 as a catalyst.

The conductive framework is generating considerable interest for lithium metal anodes to accommodate Li+ deposition, due to its ability to reduce electrode current density by increasing the deposition area. However, in most cases, the electroactive surface area is not fully utilized for the nucleation of Li in 3D current collectors, especially under high current densities. Herein, uniform nucleation of Li in the conductive skeleton is achieved by a two-step synergetic process arising from CuBr- and Br-doped graphene-like film. The modified electrode regulates Li nucleating in uniform pancake-like seeds and growing into a granular Li metal ascribed to the excellent lithiophilicity of CuBr- and Br-doping sites and the low Li diffusion barrier on the surface of generated LiBr, as confirmed by the experimental and computational results. Therefore, the modified anode endows small nucleation overpotential, a high-reversibility Li plating/stripping process, and excellent performance in full batteries with indust...

A quenching-triggered reversible single-crystal-to-single-crystal (SC-SC) phase transition was discovered in a metal-organic framework (MOF) PCN-526. During the phase transition, the one-dimensional channel of PCN-526 distorts from square to rectangular in shape while maintaining single crystallinity. Although SC-SC transformations have been frequently observed in MOFs, most reports have focused on describing the resulting structural alterations without shedding light on the mechanism for the transformation. Interestingly, modifying the occupancy or species of metal ions in the extra-framework sites, which provides mechanistic insight into the causes for the transformation, can forbid this phase transition. Moreover, as a host scaffold, PCN-526 presents a platform for modulation of the photoluminescence properties by encapsulation of luminescent guest molecules. Through judicious choice of these guest molecules, responsive luminescence caused by SC-SC transformations can be detected, introducing a new strategy for the design of novel luminescent MOF materials.

A series of cyclodextrin-based glycoconjugates, including glycoclusters and star glycopolymers, were synthesized via combination of CuAAC Huisgen coupling and copper-mediated living radical polymerization. These glycoconjugates showed high affinity binding to the human transmembrane lectin DC-SIGN and act as inhibitors to prevent the binding of HIV envelope protein gp120 to DC-SIGN at nanomolar concentrations. The star block glycopolymers showed high loading capacity of hydrophobic anticancer and anti-HIV drugs, indicating promising applications in HIV-therapeutic and smart drug delivery.

A facile and efficient self-sorting assemble (CSA) strategy has been paved for bottom-up construction of the 3-fold symmetrical and highly substituted hexa-cata-hexabenzocoronenes (c-HBCs), the trithieno analogues, and larger disc-shaped PAHs from simple chemicals using benzylic carbons as tenon joints and a novel FeCl3-mediated AAA process as a key step. The structures of the as-prepared c-HBCs and related NGs were clearly identified by spectral analyses and X-ray crystallographic studies. Moreover, these can be envisaged to serve as new launching platforms for the construction of larger and more complex π-conjugated molecules and supramolecular architectures because of the modifiable and symmetrical decorations.

Photoinduced living radical polymerization of acrylates, in the absence of conventional photoinitiators or dye sensitizers, has been realized in “daylight’”and is enhanced upon irradiation with UV radiation (λmax ≈ 360 nm). In the presence of low concentrations of copper(II) bromide and an aliphatic tertiary amine ligand (Me6-Tren; Tren = tris(2-aminoethyl)amine), near-quantitative monomer conversion (>95%) is obtained within 80 min, yielding poly(acrylates) with dispersities as low as 1.05 and excellent end group fidelity (>99%). The versatility of the technique is demonstrated by polymerization of methyl acrylate to a range of chain lengths (DPn = 25–800) and a number of (meth)acrylate monomers, including macromonomer poly(ethylene glycol) methyl ether acrylate (PEGA480), tert-butyl acrylate, and methyl methacrylate, as well as styrene. Moreover, hydroxyl- and vic-diol-functional initiators are compatible with the polymerization conditions, forming α,ω-heterofunctional poly(acrylates) with unparalleled efficiency and control. The control retained during polymerization is confirmed by MALDI-ToF-MS and exemplified by in situ chain extension upon sequential monomer addition, furnishing higher molecular weight polymers with an observed reduction in dispersity (Đ = 1.03). Similarly, efficient one-pot diblock copolymerization by sequential addition of ethylene glycol methyl ether acrylate and PEGA480 to a poly(methyl acrylate) macroinitiator without prior workup or purification is also reported. Minimal polymerization in the absence of light confers temporal control and alludes to potential application at one of the frontiers of materials chemistry whereby precise spatiotemporal “on/off” control and resolution is desirable., Journal of the American Chemical Society, 136 (3), ISSN:0002-7863, ISSN:1520-5126

From the perspective of practical application, the development of fluorescent nanocrystals with low toxicity and desirable optical properties is highly needed. Here we report a new liquid-liquid interfacial synthesis of single-crystalline ZnTe nanorods with high fluorescence. With the use of long-alkyl-chain fatty acid as the capping ligand, the reaction of zinc acrylate with NaHTe under a moderate temperature (~90 °C) at the toluene/water interface yielded high-quality ZnTe nanorods. The preparation parameters and the growth mechanism were thoroughly investigated. The as-prepared ZnTe nanorods exhibited stable blue fluorescence with quantum yield up to 60%. This bright and stable emission gives promise for the use of these relatively benign nanorods in various applications such as blue light-emitting diodes.

Polymeric nanoparticles that can stably load anticancer drugs and release them in response to a specific trigger such as glutathione are of great interest in cancer therapy. In the present study, dendrimer-encapsulated gold nanoparticles (DEGNPs) were synthesized and used as carriers of thiolated anticancer drugs. Thiol-containing drugs such as captopril and 6-mercaptopurine loaded within DEGNPs showed an "Off-On" release behavior in the presence of thiol-reducing agents such as glutathione and dithiothreitol. Thiolated doxorubicin and cisplatin, loaded within the nanoparticle, showed much reduced cytotoxicity as compared to the free anticancer compounds. The toxicity of drug-loaded DEGNPs can be enhanced by improving the intracellular glutathione. Glutathione-triggered release of thiolated doxorubicin within cancer cells is further confirmed by flow cytometry and confocal laser scan microscopy studies. In addition, DEGNPs showed excellent biocompatibility on several cell lines. This study provides a new insight into biomedical applications of dendrimers and dendrimer-encapsulated nanoparticles.

Precise placement of multiple functional groups in a highly ordered metal-organic framework (MOF) platform allows the tailoring of the pore environment, which is required for advanced applications. To realize this, we present a comprehensive study on the linker installation method, in which a stable MOF with coordinatively unsaturated Zr6 clusters was employed and linkers bearing different functional groups were postsynthetically installed. A Zr-MOF with inherent missing linker sites, namely, PCN-700, was initially constructed under kinetic control. Twelve linkers with different substituents were then designed to study their effect on MOF formation kinetics and therefore resulting MOF structures. Guided by the geometrical analysis, linkers with different lengths were installed into a parent PCN-700, giving rise to 11 new MOFs and each bearing up to three different functional groups in predefined positions. Systematic variation of the pore volume and decoration of pore environment were realized by linker installation, which resulted in synergistic effects including an enhancement of H2 adsorption capacities of up to 57%. In addition, a size-selective catalytic system for aerobic alcohol oxidation reaction is built in PCN-700 through linker installation, which shows high activity and tunable size selectivity. Altogether, these results exemplify the capability of the linker installation method in the pore environment engineering of stable MOFs with multiple functional groups, giving an unparalleled level of control.

Guided by thermodynamics, we have synthesized two mixed-linker zirconium-based metal-organic frameworks (Zr-MOFs), namely, PCN-133 and PCN-134. Both of them possess a layer-pillar structure, in which the connection between Zr6 clusters and primary BTB linkers form a (3,6)-connected kdg layer that is further extended into 3D frameworks by auxiliary DCDPS/TCPP linkers (BTB = benzene tribenzoate, DCDPS = 4,4'-dicarboxydiphenyl sulfone, TCPP = tetrakis(4-carboxyphenyl)porphyrin). PCN-134 demonstrates high porosity (N2 uptake of 717 cm(3)·g(-1) and BET surface area of 1946 cm(2)·g(-1)) and excellent chemical stability in aqueous solutions with pH values ranging from 0 to 13. More importantly, PCN-134 tolerates the partial absence of auxiliary linkers leading to structural defects during the assembly process while preserving its framework integrity. Furthermore, the defect density can be systematically controlled by tuning the occupancy of the auxiliary linker, which in turn affects the MOF properties. For instance, the dichromate uptake of PCN-134 is tuned by adjusting the BTB/TCPP ratios, which gives rise to an efficient dichromate absorbent when the TCPP molar ratio in linkers is set as 22%. In addition, the photocatalytic reduction of Cr(VI) in aqueous solution was also performed by PCN-134-22%TCPP which exhibits excellent catalytic activity. This work not only opens up a new synthetic route toward mixed-linker MOFs, but also provides tunable control of MOF defects and, in turn, the properties.

The new electron-rich, anionic, planar cluster complex [IrRu(6)(CO)(23)](-), 5, isolated as a PPN salt, PPN = [Ph(3)PNPPh(3) ](+), has been synthesized and characterized crystallographically. The complex exhibits unusual absorption and emission properties. Computational analyses have been performed to explain its metal-metal bonding and electronic properties. Anion 5 reacts with [Ph(3)PAu][NO(3)] to yield the uncharged planar complex Ru(5)Ir(CO)(20)AuPPh(3), 6, by metal atom substitution.

The six-membered heavy atom heterocycles [Re(2)(CO)(8)(μ-SbPh(2))(μ-H)](2), 5, and Pd[Re(2)(CO)(8)(μ-SbPh(2))(μ-H)](2), 7, have been prepared by the palladium-catalyzed ring-opening cyclo-dimerization of the three-membered heterocycle Re(2)(CO)(8)(μ-SbPh(2))(μ-H), 3. The palladium atom that lies in the center of the heterocycle 7 was removed to yield 5. The palladium removal was found to be partially reversible leading to an unusual example of host-guest behavior. A related dipalladium complex Pd(2)Re(4)(CO)(16)(μ(4)-SbPh)(μ(3)-SbPh(2))(μ-Ph)(μ-H)(2), 6, was also formed in these reactions of palladium with 3.

Substances containing a phenolic moiety are often metabolized to quinones whose high reactivity makes them difficult to study. Some of these precursors have clear health benefits, and some quinones themselves are used in cancer therapy, whereas others are deleterious. For example, dietary intake of phytoestrogen, genistein (Gen), seems to play a preventive role in breast cancer (BC) whereas prolonged exposure to chemically similar mammalian estrogens is clearly associated with elevated incidence of BC. Although both can be metabolized to reactive quinones, the catechol estrogen quinones (CEQs) modify DNA by redox cycling and/or depurination via a Michael addition. Here, we report an investigation of the chemical reactivity of Gen and estrone quinones to determine the chemical differences of these two biologically important molecules. The catechol genistein quinone (CGenQ), has a half-life of 4 +/- 1 s under physiological condition, as determined by glutathione trapping. It disappears by reacting with H2O to give a dihydrate, CGenQ x (H2O)2, whose structure was proved by NMR. Under reductive conditions, CGenQ x (H2O)2 is readily reduced to reform the catechol genistein (CGen). This reversible oxidation of CGen to CGenQ and the prompt moderation of its reactivity by hydration to CGenQ x (H2O)2 effectively hinders any redox cycling or depurination reaction of CGenQ with DNA. Catechol estrogen quinones, on the other hand, are sufficiently long-lived that they can damage DNA via a Michael addition or by redox cycling. Although the reactivity of CEQ in a nonaqueous solvent is similar to that of CGenQ, its reactivity in aqueous media with the free Ade base is more than 600 times that of CGenQ. These results suggest that rapid hydration of a quinone can moderate its reactivity toward biomolecules, allowing them to express, for example, estrogen-like properties without exhibiting the deleterious properties of redox cycling or directly damaging DNA via depurination reactions.

Up-converting rare-earth nanophosphors (UCNPs) have great potential to revolutionize biological luminescent labels, but their use has been limited by difficulties in obtaining UCNPs that are biocompatible. To address this problem, we have developed a simple and versatile strategy for converting hydrophobic UCNPs into water-soluble and carboxylic acid-functionalized analogues by directly oxidizing oleic acid ligands with the Lemieux-von Rudloff reagent. This oxidation process has no obvious adverse effects on the morphologies, phases, compositions and luminescent capabilities of UCNPs. Furthermore, as revealed by Fourier transform infrared (FTIR) and NMR results, oleic acid ligands on the surface of UCNPs can be oxidized into azelaic acids (HOOC(CH2)7COOH), which results in the generation of free carboxylic acid groups on the surface. The presence of free carboxylic acid groups not only confers high solubility in water, but also allows further conjugation with biomolecules such as streptavidin. A highly sensitive DNA sensor based on such streptavidin-coupled UCNPs have been prepared, and the demonstrated results suggest that these biocompatible UCNPs have great superiority as luminescent labeling materials for biological applications.

We have successfully constructed a metal–organic framework, denoted as PCN-128W, starting from chromophoric linker and zirconium salt. PCN-128W exhibits interesting piezofluorochromic behavior, the color reversibly changes from white to yellow and so does the emission maximum from 470 to 538 nm. The stepwise fluorescence change was monitored by fluorospectroscopy which demonstrated gradual shift of the emission maximum when sequential compression was exerted. In order to gain deep insights into the piezofluorochromic mechanism, both the white and yellow phases are structurally characterized.

The synthesis of well-defined protein/peptide-polymer conjugates with interesting self-assembly behavior via single electron transfer living radical polymerization in water is described. A range of protein/peptides with different physical and chemical properties have been modified to macroinitiators and optimized polymerization conditions ensure successful polymerization from soluble, insoluble, and dispersed protein/peptide molecules or protein aggregates. This powerful strategy tolerates a range of functional monomers and mediates efficient homo or block copolymerization to generate hydrophilic polymers with controlled molecular weight (MW) and narrow MW distribution. The polymerizations from bovine insulin macroinitiators follow surface-initiated "grafting from" polymerization mechanism and may involve a series of self-assembly and disassembly processes. Synthesized insulin-polymer conjugates form spheres in water, and the self-assembly behavior could be controlled via thermal control, carbohydrate-protein interaction, and protein denaturation.

A unique strategy, sequential linker installation (SLI), has been developed to construct multivariate MOFs with functional groups precisely positioned. PCN-700, a Zr-MOF with eight-connected Zr6O4(OH)8(H2O)4 clusters, has been judiciously designed; the Zr6 clusters in this MOF are arranged in such a fashion that, by replacement of terminal OH(-)/H2O ligands, subsequent insertion of linear dicarboxylate linkers is achieved. We demonstrate that linkers with distinct lengths and functionalities can be sequentially installed into PCN-700. Single-crystal to single-crystal transformation is realized so that the positions of the subsequently installed linkers are pinpointed via single-crystal X-ray diffraction analyses. This methodology provides a powerful tool to construct multivariate MOFs with precisely positioned functionalities in the desired proximity, which would otherwise be difficult to achieve.

We have for the first time developed a simple plasma-etching technology to effectively generate metal-free particle catalysts for efficient metal-free growth of undoped and/or nitrogen-doped single-walled carbon nanotubes (CNTs). Compared with undoped CNTs, the newly produced metal-free nitrogen-containing CNTs were demonstrated to show relatively good electrocatalytic activity and long-term stability toward oxygen reduction reaction (ORR) in an acidic medium. Owing to the highly generic nature of the plasma etching technique, the methodology developed in this study can be applied to many other substrates for efficient growth of metal-free CNTs for various applications, ranging from energy related to electronic and to biomedical systems.