Search

ATHENA+ is a space mission proposal for the next ESA L2-L3 slot. One of the focal plane instruments is the X-ray integral field unit (X-IFU) working in the energy range 0.3-10 keV. It is a multi-array based on TES detectors aimed at characterizing faint or diffuse sources (e.g. WHIM or galaxy outskirt). The X-IFU will be able to achieve the required sensitivity if a low background is guaranteed. The studies performed by GEANT4 simulations depict a scenario where the use of an active anticoincidence (AC) is mandatory to reduce the background expected in L2 orbit down to the goal level of 0.005 cts cm $$^{-2}$$ s $$^{-1}$$ keV $$^{-1}$$ . This is possible using a cryogenic anticoincidence (CryoAC) detector placed within a proper optimized environment surrounding the X-IFU. We propose a 2 $$\times $$ 2 array of microcalorimeter detectors made by silicon absorber (each of about 1 cm $$^{2}$$ and 300 $$\upmu $$ m thick) and sensed by an Ir TES. In order to better understand the involved physics and optimize the performance, we have produced several samples featured by different absorber areas, TES size, and QPs Al collectors. Here we will discuss, as a review, the obtained results and the related impact to the final detector design. [ABSTRACT FROM AUTHOR]

We are developing the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2 mm × 1 mm Ir/Au TES, featuring an on-chip heater for calibration and diagnostic purposes. We have illuminated the sample with 55Fe (6 keV line) and 241Am (60 keV line) radioactive sources, thus studying the detector response and the heater calibration accuracy at low energy. Furthermore, we have operated the sample in combination with a past-generation CryoAC prototype. Here, by analyzing the coincident detections between the two detectors, we have been able to characterize the background spectrum of the laboratory environment and disentangle the primary (i.e. cosmic muons) and secondaries (mostly secondary photons and electrons) signatures in the spectral shape. [ABSTRACT FROM AUTHOR]

The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which work in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonstration Models, performed in a FDM setup. We show that it is possible to operate properly both detectors, and we provide a preliminary demonstration of the anti-coincidence capability of the system achieved by the simultaneous detection of cosmic muons. [ABSTRACT FROM AUTHOR]

The current projects of future X-rays space telescopes foresee high resolving power transition edge sensor (TES) micro-calorimeters arrays as focal plane instrument. In order to full exploit their sensitivity in the space environment, they need an anticoincidence detector to reject the background due to cosmic charged particles. High-energy protons (> 150 MeV) and other charged particle may release in the X-ray calorimeter, the same energy of the X-rays sources under observation. We report the description of the last prototype based on TES calorimeter where a 1-cm2 silicon chip is used as both substrate and absorber. The readout is made of 96 iridium/gold TESs uniformly distributed on its surface and parallel wired. In this paper, we will describe the design, with the preliminary phonon dynamics simulation, the fabrication, of first demonstration model for the ATHENA space telescope project. [ABSTRACT FROM AUTHOR]

The ATHENA observatory is the second large class ESA mission to be launched on 2031 at L2 orbit. One of the two onboard instruments is X-IFU, a TES-based kilo-pixel array able to perform simultaneous high-grade energy spectroscopy (FWHM 2.5 eV@7 keV) and imaging over the 5′ field of view. The X-IFU sensitivity is degraded by primary particle background of both solar and galactic cosmic ray (GCR) origins, and by secondary electrons produced by primaries, interacting with the materials surrounding the detector: These particles cannot be distinguished by the scientific photons, thus degrading the instrument performance. Results from studies regarding the GCR component performed by Geant4 simulations address the necessity to use background reduction techniques to enable the study of several key science topics. This is feasible by combining an active Cryogenic AntiCoincidence detector (CryoAC) and a passive electron shielding to reach the required residual particle background of 0.005 cts/cm2/s/keV inside the 2–10 keV scientific energy band. The CryoAC is a four-pixel detector made of Si-suspended absorbers sensed by a network of IrAu TESes and placed at a distance < 1 mm below the TES array. Here we will provide an overview of the CryoAC program, starting with some details on the background assessment having impacts on the CryoAC design; then, we continue with its design concept including electronics and the Demonstration Model results, to conclude with programmatic aspects. [ABSTRACT FROM AUTHOR]

The Cryogenic AntiCoincidence detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4-pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC demonstration model, a prototype aimed to probe the critical technologies of the detector, i.e., the suspended absorber with an active area of 1 cm2; the low energy threshold of 20 keV; and the operation connected to a 50 mK thermal bath with a power dissipation less than 40 nW. Here, we report the test performed on the first CryoAC DM sample (namely, the AC-S10 prototype), showing that it is fully compliant with its requirements. [ABSTRACT FROM AUTHOR]

The ATHENA X-ray observatory is the second large-class mission in the ESA Cosmic Vision 2015-2025 science programme. One of the two on-board instruments is the X-IFU, an imaging spectrometer based on a large array of TES microcalorimeters. To reduce the particle-induced background, the spectrometer works in combination with a cryogenic anticoincidence detector (CryoAC), placed less than 1 mm below the TES array. The last CryoAC single-pixel prototypes, namely AC-S7 and AC-S8, are based on large-area (1 cm2) silicon absorbers sensed by 65 parallel-connected iridium TES. This design has been adopted to improve the response generated by the athermal phonons, which will be used as fast anticoincidence flag. The latter sample is featured also with a network of aluminum fingers directly connected to the TES, designed to further improve the athermals collection efficiency. In this paper, we will report the main results obtained with AC-S8, showing that the additional fingers network is able to increase the energy collected from the athermal part of the pulses (from the 6% of AC-S7 up to the 26 % with AC-S8). Furthermore, the finger design is able to prevent the quasiparticle recombination in the aluminum, assuring a fast pulse rising front (L/R limited). In our road map, the AC-S8 prototype is the last step before the development of the CryoAC demonstration model, which will be the detector able to demonstrate the critical technologies expected in the CryoAC development programme. [ABSTRACT FROM AUTHOR]

The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now developing the DM of the X-IFU Cryogenic AntiCoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly development team for the integration with the TES array. Before the delivery, we will characterize and test the CryoAC DM in our CryoLab at INAF/IAPS. In this paper, we report the main results of the activities performed to improve our cryogenic test setup, making it suitable for the DM integration. These activities mainly consist in the development of a mechanical setup and a cryogenic magnetic shielding system, whose effectiveness has been assessed by FEM simulations and a measurement at warm. The preliminary performance test has been performed by means of the last CryoAC single-pixel prototype, the AC-S8 pre-DM sample. [ABSTRACT FROM AUTHOR]

The Athena X-ray Integral Field Unit (X-IFU) will operate at 90 mK a hexagonal matrix of 3840 Transition Edge Sensor pixels providing spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) between 0.2 and 12 keV. During the observation of very bright X-ray sources, the X-IFU detectors will receive high photon rates going up to several tens of counts per second per pixel and hundreds per readout channel, well above the normal operating mode of the instrument. In this paper, we investigate through detailed end-to-end simulations the performance achieved by the X-IFU at the highest count rates. Special care is notably taken to model and characterize pulse processing limitations, readout-chain saturation effects, as well as the non-Gaussian degradation of the energy redistribution from crosstalk at the focal plane level (both thermal and electrical). Overall, we show that the instrument performance should safely exceed the scientific requirements, and in particular that more than 50 % throughput at 1 Crab in the 5-8 keV band can be achieved with better than 10 eV average resolution with the use of a Beryllium filter, enabling breakthrough science in the field of bright sources. [ABSTRACT FROM AUTHOR]

The X-ray Integral Field Unit (X-IFU) of the Advanced Telescope for High-ENergy Astrophysics (Athena) large-scale mission of ESA will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5″ pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV (FWHM) up to 7 keV. The core scientific objectives of Athena drive the main performance parameters of the X-IFU. We present the current reference configuration of the X-IFU, and the key issues driving the design of the instrument. [ABSTRACT FROM AUTHOR]

The ATHENA observatory is the second large-class ESA mission, in the context of the Cosmic Vision 2015-2025, scheduled to be launched on 2028 at L2 orbit. One of the two planned focal plane instruments is the X-ray Integral Field Unit (X-IFU), which will be able to perform simultaneous high-grade energy spectroscopy and imaging over the 5 arcmin FoV by means of a kilo-pixel array of transition-edge sensor (TES) microcalorimeters, coupled to a high-quality X-ray optics. The X-IFU sensitivity is degraded by the particle background, induced by primary protons of both solar and cosmic rays' origin and secondary electrons. A Cryogenic AntiCoincidence (CryoAC) TES-based detector, located $$<$$ 1 mm below the TES array, will allow the mission to reach the background level that enables its scientific goals. The CryoAC is a 4-pixel detector made of Silicon absorbers sensed by Iridium TESs. We currently achieve a TRL $$=$$ 3-4 at the single-pixel level. We have designed and developed two further prototypes in order to reach TRL $$=$$ 4. The design of the CryoAC has been also optimized using the Geant4 simulation tool. Here we will describe some results from the Geant4 simulations performed to optimize the design and preliminary test results from the first of the two detectors, 1 cm $$^{2}$$ area, made of 65 Ir TESs. [ABSTRACT FROM AUTHOR]

ATHENA is the L2 mission selected by ESA to pursue the science theme 'Hot and Energetic Universe.' One of the two focal plane instruments is the X-ray Integral Field Unit, an array of TES microcalorimeters operated at T $$<$$ 100 mK. To allow the X-ray photons focused by the telescope to reach the detector, windows have to be opened on the cryostat thermal shields. X-ray transparent filters need to be mounted on these open windows to attenuate the IR radiation from warm surfaces, to attenuate RF electromagnetic interferences on TES sensors and SQUID electronics, and to protect the detector from contamination. This paper reviews the ongoing activities driving the design of the X-IFU thermal filters. [ABSTRACT FROM AUTHOR]

Cryogenic micro-calorimeters are suitable to detect small amounts of energy deposited by electromagnetic and nuclear interactions, which makes them attractive in a variety of applications on ground and in space. The only X-ray micro-calorimeter that operated in orbit to date is the X-Ray Spectrometer on-board of the Japanese Suzaku satellite. We discuss the analysis of the components of its residual background spectrum with the support of Monte-Carlo simulations. [ABSTRACT FROM AUTHOR]

The TES cryogenic detectors, due to their high spectral resolution and imaging capability in the soft X-ray domain, are the reference devices for the next proposed space missions whose aims are to characterize the spectra of faint or diffuse sources. ATHENA is the re-scoped IXO mission, and one of its focal plane instrument is the X-ray Microcalorimeter Spectrometer (XMS) working in the energy range 0.3-10 keV. XMS will be able to achieve the proposed scientific goals if a background lower than 0.02 cts/cm/s/keV is guaranteed. The studies performed by GEANT4 simulations depict a scenario where it is mandatory to use an active Anti-Coincidence (AC) to reduce the expected background in the L2 orbit down to the required level. This is possible using a cryogenic AC detector able to provide a rejection efficiency of about 99%. We are developing for this purpose a TES-based detector made by Silicon absorbers (total assembled area about 1 cm and 300 μm thick) and sensed by a Ir:Au TES. All the work done for IXO is applicable to ATHENA, with more margins due to the smaller area required for the detector. Here we present the results obtained from different samples, as a step towards the final detector design. [ABSTRACT FROM AUTHOR]

We are investigating possible technical solutions to minimize the instrumental non X-ray background (NXB) of the X-ray Micro-calorimeter Spectrometer (XMS) for the ATHENA space mission. In the proposed design, XMS will be provided with an anti-coincidence system in order to reject most of the X-ray-like events produced by primary solar and cosmic particles that are expected to populate the L-2 space environment. However, the rejection efficiency of events produced by secondary particles cannot be as good as that of events produced directly by primary particles. Among secondary emitted particles, knock-on electrons have in general a major impact in determining the NXB level of X-ray detectors. For this reason, it may be helpful to adopt some techniques of passive shielding together with the use of the active anti-coincidence. We present preliminary results of a study on polyimide sheets, which could be employed to reduce the fluence of knock-on electrons onto XMS and, more in general, to optimize the design and configuration of X-ray detectors in orbit. [ABSTRACT FROM AUTHOR]