Search

It is an interesting research topic to study the interfacial interactions between hemicellulose and cellulose, specifically how hemicellulose's structure affects its binding to cellulose nanofibers. Our research proposes that dispersion interaction play an important role in this interfacial interaction, more so than electrostatic forces when considering the adherence of cellulose to xylan. To quantify these interactions, the Atomic Force Microscope (AFM) colloidal probe technique is applied to measure the intermolecular forces between cellulose nanofibers, which are attached to the probe and xylan. These measured forces are then analyzed in relation to the length, diameter and functional groups of the nanocellulose, as well as the molecular weight and side chains of the xylan. Moreover, the predominance of dispersion forces by contrasting the adhesive forces before and after the grafting of a large nonpolar group onto xylan. This modification significantly reduces contact between the cellulose and xylan backbone, thereby markedly diminishing the dispersion interactions. Parallel to the AFM experiments, molecular dynamics (MD) simulations corroborate the experimental results and support our hypotheses. Collectively, these findings contribute to a deeper understanding of polysaccharide interactions within lignocellulose., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The Bletilla striata polysaccharides (BSP) extracted through alkali-assisted method exhibit significant antioxidant activity, but its bioaccessibility was inadequate due to its tightly filamentous reticulation structure and high molecular weight. The anti-photoaging and anti-melanogenesis effects of degraded BSP (DBSPs) against UVB-induced oxidative stress on the skin were investigated. The molecular weights of the DBSPs were reduced to 153.94 kDa, 66.96 kDa, and 15.54 kDa from an initial value of 298.82 kDa. The degradation treatment altered the branched chain structure of the DBSPs, while the backbone structure, triple-helix structure, and crystallinity remained. DBSPs with a lower molecular weight exhibit better in vitro antioxidant activity. DBSPs did not show cytotoxicity to HSF cells but inhibited B16F10 cell proliferation. The addition of DBSPs protected HSF and B16F10 cells from oxidative stress and reduced ROS levels, B16F10 melanin content, and B16F10 tyrosinase activity after UVB damage, but DBSP-10 particles were slightly less effective due to aggregation. In contrast, DBSP-5 demonstrated effectiveness in reducing MDA levels in cells stressed by oxidative stress, increased total antioxidant capacity, and inhibited melanogenesis in B16F10, suggesting that DBSP-5 has potential as a topical therapeutic agent for the treatment of skin diseases associated with oxidative stress., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Local drug delivery has generated considerable interest due to its controlled and sustained drug release at the target site on demand. Nanoaggregate-incorporated composite hydrogels are desirable as local drug delivery systems; however, it is difficult to achieve sustained and controlled hydrophobic drug release and superior mechanical properties in one system. Herein, a "smart" composite hydrogel was synthesized by incorporating hemicellulose-based nanoaggregates into a double network consisting of alginate/Ca 2+ and polyacrylic acid-co-dimethylaminoethyl methacrylate [P(AA-co-DMAEMA)]. Hemicellulose-based nanoaggregates were assembled from xylan-rich hemicellulose laurate methacrylate (XH-LA-MA) polymers and entrapped into the hydrogel framework via chemical fixation. Another composite hydrogel with physically embedded hemicellulose laurate (XH-LA) nanoaggregates was prepared as a comparison. Accordingly, covalently cross-linked XH-LA-MA nanoaggregates in hydrogels resulted in a denser pore structure and reinforced mechanical properties. Nanoaggregate diffusion analysis revealed that covalent bonding between the nanoaggregates and the hydrogel framework contributed to prolonged diffusion behavior. Curcumin (Cur)-loaded XH-LA-MA composite hydrogels enabled sustained Cur release in simulated body fluid and showed stimulus responsiveness toward ethylenediaminetetraacetic acid (EDTA) and/or glutathione (GSH). All the composite hydrogels were biocompatible, as verified by Cell Counting Kit-8 (CCK-8) assay against NIH/3T3 cells. These composite hydrogels hold great potential as a promising dosage form for biomedical applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Selective fractionation of hemicelluloses is of great significance for realizing high-value application of hemicelluloses and comprehensive utilization of lignocellulosic biomass. Tetramethylammonium hydroxide (TMAH) solvent has been confirmed as a promising solvent to selectively fractionate hemicelluloses from holocellulose. Herein, TMAH solvent was adopted to pretreat poplar thermomechanical pulp (PTMP) for the selective fractionation of hemicelluloses and enhancement of enzymatic hydrolysis performance of residues. The maximal hemicelluloses yield (65.0 %) and excellent cellulose retention rate (93.3 %) were achieved after pretreatment by the 25 wt% TMAH solvent, while the delignification was only 33.9 %. The hemicelluloses fractions could be selectively fractionated with high molecular weights (109,800-118,500 g/mol), the contents of Klason lignin in them were low (3.2-5.9 %), and the dominating structure of them was 4-O-methylglucurono-β-D-xylan. Compared to the H 2 SO 4 and NaOH methods, the hemicelluloses fractionated by TMAH method exhibited higher yields, more complete structures and higher molecular weights. Furthermore, the crystalline structure of cellulose practically remained stable, and the highest yield of enzymatic hydrolysis glucose was 57.5 %, which was 3.3 times of that of PTMP. The fractionation effectiveness of TMAH solvent was not significantly reduced after repeatedly recycling. This work demonstrated TMAH solvent could selectively fractionate hemicelluloses from PTMP and efficiently promote sustainable poplar-based biorefinery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

It is believed that hemicellulose plays a crucial role in binding cellulose and lignin in plant cells. It may provide significant implications through figuring out the interaction between hemicellulose and microfibers and gaining insights how the structure of hemicellulose affects its association with cellulose nanofibers. Herein, the hemicellulose and nanocellulose fractions from pulps obtained by controlling the H-factors of kraft pulping process were quantitatively evaluated for their adsorption behavior using QCM-D. The results showed that harsher cooking (corresponding to high H-factor) significantly affected the chemical composition of hemicellulose, leading to a decrease of its molecular weight and gradually turning it into a linear structure. Hemicellulose possesses a strong natural affinity for CNC-coated sensors. The hemicellulose from the pulp cooked by high H-factor process decreases its ability to adsorb onto nanocellulose, the adsorption rate also slows down, and the conformation of the adsorbed layer changes which makes the binding weak and reversible. In conclusion, the pulping process in high H-factor significantly changed the structure of hemicellulose, leading to a variation in the strength of its interaction with nanocellulose., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, we investigate a multicomponent synthetic method for combining saccharides with cellulose to produce saccharide branched cellulose (b-Cel). First, cellulose is modified conventionally using carboxymethyl to create carboxyl functional groups for multicomponent reactions. The Passerini three-component reaction (Passerini-3CR) is then used to synthesize the saccharide b-Cel, with particular attention paid to the scope of the substrate and reaction process optimization. The structure of saccharide b-Cel is regulated by modifying the carboxyl group of cellulose molecules, the kind of saccharide molecules (including glucose, galactose, lactose, cellobiose, and cellulose), and the degree of branching. The branched structure of saccharide b-Cel greatly influenced its rheological characteristics and solubility. This work presents a practical method for the synthesis of artificial branching polysaccharides and is crucial for the development of innovative materials based on biomass., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

To comprehend the biosynthesis processes of conifers, it is essential to investigate the disparity between the cell wall shape and the interior chemical structures of polymers throughout the development of Chinese pine. In this study, branches of mature Chinese pine were separated according to their growth time (2, 4, 6, 8 and 10 years). The variation of cell wall morphology and lignin distribution was comprehensively monitored by scanning electron microscopy (SEM) and confocal Raman microscopy (CRM), respectively. Moreover, the chemical structures of lignin and alkali-extracted hemicelluloses were extensively characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The thickness of latewood cell walls increased steadily from 1.29 μm to 3.38 μm, and the structure of the cell wall components became more complicated as the growth time increased. Based on the structural analysis, it was found that the content of β-O-4 (39.88-45.44/100 Ar), β-β (3.20-10.02/100 Ar) and β-5 (8.09-15.35/100 Ar) linkages as well as the degree of polymerization of lignin increased with the growth time. The complication propensity increased significantly over 6 years before slowing to a trickle over 8 and 10 years. Furthermore, alkali-extracted hemicelluloses of Chinese pine mainly consist of galactoglucomannans and arabinoglucuronxylan, in which the relative content of galactoglucomannans increased with the growth of the pine, especially from 6 to 10 years., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In recent years, the biological activity of polysaccharides and their derivatives has been widely studied. However, in addition to the natural polysaccharides directly extracted from plants and animals, there are rich polysaccharides in the pulping waste liquor that have not been fully utilized. The extracted polysaccharide from eucalyptus Alkaline Peroxide Mechanical Pulping (APMP) waste liquor was used as a raw material. For the production of carboxymethyl polysaccharide, the effects of temperature (T), the amount of alkali (NaOH) and the amount of etherifying agent (ClCH 2 COOH) on the degree of substitution (DS) were investigated, the optimal preparation conditions are: reaction time 2 h, temperature 75 °C, and the molar ratio of polysaccharide, NaOH and ClCH2COOH is 1:1:2, the highest DS is 1.47; FT-IR, NMR and GPC were used to characterize the structure and Molecular weight, the results show that the polysaccharide of APMP waste liquor is rich in xylan, and it was proved that the carboxymethyl substitution was successful and the positions of the substituent group were determined. The characterization and biological activity research of xylan polysaccharide (XP) and carboxymethyl xylan polysaccharide (CMXP), such as antioxidation, moisture absorption/retention, bacteriostatic action and cytotoxicity were discussed. CMXP shows better effects compared with XP., (Copyright © 2021. Published by Elsevier B.V.)

The conductive hemicellulose hydrogels (CHHs) were achieved by incorporating carboxyl terminated aniline pentamer (CTAP) into the hydrophilic xylan-rich hemicellulose networks with epichlorohydrin. CHHs were obtained by facile one-pot reaction in water at ambient temperature. The successful synthesis of CTAP was confirmed by FT-IR, 1 H NMR, and UV-vis spectra. All the hydrogels reached their equilibrium-swollen state within 12 h. The morphology and the thermal stability of CHHs were adjusted by the addition of CTAP. The conductivities of CHHs could also be tuned from 8.92 × 10 -5 to 2.11 × 10 -3 S/m by adding the blending amounts of the CTAP from 0 to 50% mass ratio while simultaneously altering the equilibrium swelling ratio from 28.1 to 15.8. CHHs showed homogeneous porous structure, tunable swelling behavior, controllable conductivity, and good thermal stability. These results highlight that CHHs are attractive candidates to be used in biomedical applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Eucalyptus wood was pretreated with an integrated process based on hydrothermal and alkaline pretreatments. The structural changes of hemicelluloses during the pretreatments and the components of the hydrolysates were comprehensively characterized. Sugar and spectral analyses indicated that the hemicelluloses remained in the residues obtained at hydrothermal pretreatment under low temperatures were mainly composed of a (1 → 4)-β-D-Xylp backbone with 4-O-methyl-α-D-glucuronic acids attached at O-2 of the xylose together with various monosaccharides of rhamnose, arabinose, galactose, glucose, and mannose. The pretreatments resulted in serious degradation of hemicelluloses at high pretreatment temperatures. The distribution changes of the hemicelluloses in the cell walls during the integrated pretreatments were detected by Confocal Raman Microscopy, which revealed that the dissolution of hemicelluloses in different morphological regions was inhomogeneous, and the a large portion of hemicelluloses were removed from the secondary cell wall regions during the pretreatments., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Huge amount of waste hemicellulose liquor annually produced in China was burned or discharged into surrounding environment without further sufficient utilization, causing severely environmental issues. In order to solve this problem, this study aimed to find a way to effectively use aqueous waste hemicellulose solution from viscose fiber mills for bio-based materials development. Hereby, polyacrylamide-hemicellulose hybrid films were synthesized through the copolymerization of acrylamide (AM) monomers and hemicellulose initiated by potassium persulfate/N,N,N',N'-tetramethylethylenediamine (KPS/TMEDA) redox initiator system with cross-linker N,N-Methylene-bis(acrylamide) (MBA). The as-prepared films had been further characterized by Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), gel permeation chromatography (GPC), mechanical test, light transmittance determination and oxygen transmission rate measurement. The results showed that the hybrid films possessed many advantages, such as ambient-temperature water solubility, good recyclability, high stretchable properties and low oxygen permeability. These properties implied their application potentials in several areas, such as packaging electronics products, food and pesticide. Moreover, the utilization of aqueous waste hemicellulose solution from viscose fiber mills will have huge market potential and economic benefits., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Galactoglucomannan (GGM) is the main hemicellulose class in wood of coniferous trees and could be potentially utilized as a possible health-promoting substance for food and pharmaceutical industry. Our aim was to evaluate effects of orally administered GGM-rich extract from Norway spruce in a rat model of chronic prostatitis associated with lower urinary tract symptoms (LUTS). Prostatic inflammation and LUTS was induced in male rats using testosterone and 17β-estradiol exposure for 18 weeks. Rats were treated with 2% GGM dissolved in drinking water during weeks 13-18. Pelvic pain response, LUT function and histopathological evaluation of the prostate were assessed. The results show that hormonal exposure induced LUTS seen as decreased urine flow rate, increased bladder pressure, voiding times, bladder capacity and residual urine volumes. GGM had positive effects on urodynamical parameters by decreasing the basal bladder pressure, increasing the urine flow rate and volume, reducing the residual volume and increasing micturition intervals. GGM reduced the extent of the hormone exposure-induced prostatic inflammation. Increase of pelvic pain induced by hormone exposure was only slightly affected by GGM treatment. The results suggest that orally administered GGM may have potential usage for improving lower urinary tract function associated with chronic prostatic inflammation., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this study, an environmental-friendly hydrothermal pretreatment of Eucalyptus fiber followed with alkali post-treatment was developed to produce bioethanol efficiently. This biorefinery process allowed all major components of biomass being converted into high value-added products. The chemical and structural features of the residual hemicelluloses isolated with alkali from the hydrothermal pretreated Eucalyptus fiber, were comparatively investigated. Sugar and spectral analyses indicated that the hemicelluloses were mainly composed of glucuronoxylans, and especially hemicelluloses prepared at higher temperature (180°C) contained higher contents of glucomannans and α-glucan. Hydrothermal pretreatment resulted in a significant hydrolysis of the glycosidic linkages in xylan backbone, and thus the molecular weight of the hemicelluloses was significantly reduced from 56,520 to 7780g/mol with the increase of temperature. This suggested that a combination of hydrothermal pretreatment at low temperatures (100-140°C) and alkali post-treatment was an effective technique for isolating of hemicelluloses from Eucalyptus fiber., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The aim of this study was to evaluate the influence of mild alkaline pre-extraction on the hemicelluloses removal of rice straw. In addition, the performance of cellulose nanofibers (CNFs) addition on some physico-mechanical properties obtained from extracted and un-extracted (control) samples were investigated. An optimum compromise was found as operating conditions (10% soda, 50°C, and 90min) that provided moderate hemicelluloses removal (48.1%). The residual extracted rice straw particles were subjected to soda-anthraquinone pulping at 160°C for 30-60min with 6 to 18% active alkali charge. Compared with the control samples, the screened yield and Kappa number for extracted pulps decreased slightly. Extracted samples showed better air resistance compared with the un-extracted (control) pulps. However, pre-extraction was found to negatively impact on some mechanical properties such as decrease in burst and tensile indices while addition of CNFs and refining of fibers could improve the strength properties considerably. In general, the addition of CNFs in any concentrations considerably enhanced tensile and burst indices of the sheets in extracted and un-extracted conditions, compared with the unfilled ones. The improvement in mechanical properties was considered one of the key benefits brought by CNFs reinforcement. On the other hand, the stretch properties of the beaten pulps are higher than those of control samples. SEM observations showed that CNFs were deposited on the voids between the rice straw fibers., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Hemicelluloses were extracted from holocellulose of bamboo by alkaline treatment. The phosphorylated poly(vinyl alcohol) (P-PVA) samples with various substitution degrees were prepared through the esterification of PVA and phosphoric acid. A series of hydrogels of semi-interpenetrating polymeric networks (semi-IPN) composed of hemicelluloses-g-poly(acrylic acid) (HM-g-PAA) and the phosphorylated poly(vinyl alcohol) (P-PVA) were prepared by radical polymerization using potassium persulphate (KPS) as initiator. The HM-g-PAA networks were crosslinked by N,N-methylenebisacrylamide (MBA) as a crosslinking agent in the presence of linear P-PVA. FT-IR results confirmed that the hydrogels comprised a porous crosslink structure of P-PVA and HM with side chains that carried carboxylate and phosphorylate groups. SEM observations indicated that the incorporation of P-PVA induced highly porous structure, and P-PVA was uniformly dispersed in the polymeric network. The interior network structures of the semi-IPN matrix became more porous with increasing P-PVA. The TGA results showed that the thermo-decomposing temperature and thermal stability were increased effectively for intruding the chain of P-PVA. The maximum equilibrium swelling ratio of hydrogels in distilled water and 0.9 wt% sodium chloride solutions was up to 1085 g g(-1) and 87 g g(-1), respectively. The compressive strength increased with increasing the MBA/HM and P-PVA/HM ratios, and decreased with the increment of AA/HM ratio., (Copyright © 2014 Elsevier B.V. All rights reserved.)