Search

This paper proposes a novel solution to the problem of robust ripple‐free hybrid robust regulator ensuring the elimination of intersample ripples. The paper considers a structurally stable regulation approach in the hybrid framework. A regulator is designed using this technique under periodic sampling and is applied to the nonlinear model of a quadrotor. The control of unmanned autonomous vehicles has become a research topic that is important by itself, particularly in the case of multi‐rotor systems due to their versatility in various applications. Tracking a reference signal for such vehicles can be challenging, particularly when the frequency of communication is limited, or the control station is located far away. The proposed controller is hence tested for this challenging application. [ABSTRACT FROM AUTHOR]

This paper extends the characteristic ratio approach using novel inequalities to ensure zero/low overshoot for linear‐time‐invariant systems with zeros. The extension provided by this paper is based on the maximally‐flatness property of a transfer function, where the square‐magnitude of the transfer function is ensured to be a low‐pass filter. In order to be able to design low‐order/fixed structure controllers, a partial pole‐assignment approach is used instead of the full pole‐assignment used in the Characteristic Ratio Assignment (CRA) method. The developed inequalities and additional stability conditions are combined into an optimization problem using time domain restrictions when necessary. Although the method given in the paper is general, particular inequalities are developed for PI and PI‐PD controller cases, due to their frequent use in industrial applications. Similarly, First‐Order‐Plus‐Delay‐Time (FOPDT) and Second‐Order‐Plus‐Delay‐Time (SOPDT) systems are considered specifically, since most of the practical systems can be approximated by one of these types. The study is extended to plants with uncertainties where a theorem is developed to decrease computation time dramatically. The benefits of the proposed methods are demonstrated by several examples. [ABSTRACT FROM AUTHOR]

This paper is concerned with the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. In contrast to existing synchronization network models, the current study considers both internal time‐varying delays and coupling time‐varying delays. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a new inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. To demonstrate the effectiveness of the present approach, simulation results are illustrated. In this paper, we consider the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. Different from the existing synchronization of the networks model, we take the internal time‐varying delays and the coupling time‐varying delays into account. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a novel inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. [ABSTRACT FROM AUTHOR]

This paper concentrates on presenting a reliable procedure to compute the stabilizing region of fractional‐order proportional integral derivative (FOPID) controllers for interval fractional‐order plants having an interval time delay. An interval fractional‐order plant is defined as a fractional‐order transfer function whose denominator and numerator coefficients are all uncertain and lie in specified intervals. Also, an interval time delay points to a delay term whose value varies in a specific interval. The D‐decomposition technique and the value set concept are employed to determine the stabilizing region of FOPID controllers. In this study, first, a theorem is presented to compute the boundary of the value sets of systems having interval time day. Then, a lemma is provided for robust stability analysis of the given closed‐loop control system. For a convenient use of the paper results, an algorithm is proposed to solve the problem of robustly stabilizing interval fractional‐order plants with an interval time delay using FOPID controllers. Finally, four examples are provided to illustrate the proposed procedure. [ABSTRACT FROM AUTHOR]

This paper presents a novel input channel gain adaptive active disturbance rejection control (ICGA‐ADRC) framework for the nonlinear control system with large load variation. This paper first introduces the design of ICGA‐ADRC and proves its stability through the rigorous Lyapunov approach. Subsequently, the proposed controller is simulated by subjecting it to a nonlinear mass‐spring‐damping system characterized by significant load variations. Furthermore, the position‐tracking performance of the controller is tested experimentally by using a motor‐driven pendulum system with various loads. Finally, the results of both simulations and experiments show that the ICGA‐ADRC is capable of compensating for system model uncertainty and external perturbation while accurately estimating the system input channel gain in real‐time. The innovation of this paper is that the robustness of active disturbance rejection control (ADRC) to the system load variation is significantly strengthened by integrating robust adaptive finite‐time parameter estimation method into the conventional ADRC control architecture. [ABSTRACT FROM AUTHOR]

This paper presents a study of the cooperative optimal swarm control problem for two‐order multi‐agent systems with partially unknown nonlinear functions. Unlike traditional approaches that consider a single error, this paper proposes to use multi‐order errors in the performance index function to achieve optimal control performance. Additionally, different proportional coefficients are assigned to illustrate the varying influences of each sequence error, and a two‐order cooperative (TOC)performance index function is designed. To address the influence of unknown nonlinear functions, a swarm control system based on sliding mode control with an actor‐critic network is constructed, which increases the applicability of the proposed method to a variety of dynamic models. Furthermore, to alleviate the computational pressure caused by the multi‐order errors in the TOC performance index function, a new reinforcement learning (RL)‐based sliding mode swarm controller is designed. The stability of the proposed controller is demonstrated using the Lyapunov function. Finally, the control model and control rate are applied to a quadrotor unmanned aerial vehicle system, and simulation results demonstrate that the multi‐agent systems can effectively achieve swarm control. Impact Statement: This paper proposes a reinforcement learning‐based sliding mode control strategy for the cooperative optimal swarm control problem, where the nonlinear functions of two‐order multi‐agent systems are only partially known. In addition, we also propose a cooperative performance index function, which takes into account multi‐order errors for optimizing the performance. This contribution is significant for research in sliding mode control strategies and error co‐optimization. [ABSTRACT FROM AUTHOR]

Aiming to improve the estimation and prediction accuracy of a target's position, this paper proposes a state estimation method for photoelectric tracking systems, based on the evaluation of the tracked target's motion intention. Traditional photoelectric tracking systems utilize external physical quantities such as the position, velocity, and acceleration of the target as the estimated states. While this method can output good results for pre‐modelled target positions, it struggles to maintain the accuracy when facing manoeuvering targets or complex motion patterns targets. Here, the relevant parameters of the tracked target's motion intention are directly estimated innovatively, like estimating the circling point position rather than the circular flying target's position and velocity. This approach enables recognizing the target's motion intention and leads to precise estimation, which specifically consists of an interacting multiple model approach, multiple unscented Kalman estimators, and a robust estimator. The effectiveness and stability of this estimator are validated through software simulations and experiments on a dual‐reflection mirror platform. [ABSTRACT FROM AUTHOR]

This paper explores two non‐linear control techniques for designing an effective control system for an omnidirectional autonomous mobile robot with four Mecanum wheels. Due to the unique wheel structure and four separate wheels, the robot has non‐linear dynamics, multiple inputs and outputs. The first technique uses the state‐dependent Riccati equation (SDRE) to address optimal non‐linear control while considering energy and time constraints. The second technique, using an intermediate variable θ$\theta $, has expanded the Hamilton‐Jacobi‐Belman equation in terms of the power series. Consequently, these equations are reduced to a set of recursive Lyapunov algebraic equations, leading to a closed‐form solution for solving the non‐linear optimal control problem. Finally, the maneuverability and path‐tracking capability of the robot are examined by highlighting the non‐linear term through numerical simulation. [ABSTRACT FROM AUTHOR]

This paper studies the finite time stabilization control (FTSC) problem of nonlinear systems with unknown functions and full‐state constraints (FSCs). A lemma dealing with unknown functions is put forward so that the assumptions and the "explosion of terms" (EOT) of backstepping are avoided. Compared with approximation algorithms, this algorithm can make the system states converge to the origin in a finite time. On the other hand, a new logarithmic constraint function is utilized to solve the drawback of barrier Lyapunov functions (BLFs). Then, combined with finite time control (FTC), an FTSC algorithm with FSCs is proposed. Finally, simulations of Chua's circuit system are given to verify the effectiveness and superiority of this algorithm. Compared with the approximation algorithm, this algorithm can theoretically make the states of Chua's circuit system to the origin in a finite time. [ABSTRACT FROM AUTHOR]

This paper studies the input‐to‐state stability of an uncertain switched linear system with external disturbances, whose feedback loop is closed over a digital communication network. In the network, only a finite bit rate can be provided to transmit the feedback signal and unknown network delay always exists. By using reachable set approximation and propagation methods, it can well handle with the effects of model uncertainty, external disturbances and network delay on the stability of the system. To save network resources, event‐triggered sampling is taken here. Under the event‐triggered sampling strategies, a new encoder is proposed, which consumes less feedback bits than the conventional time‐triggered encoders. It is proven that even in the existence of model uncertainty, external disturbances and network delay, the proposed event‐triggered sampling strategies require a lower feedback bit rate to stabilize the switched system than conventional periodic sampling methods. To save network resources, event‐triggered sampling is taken here. Under the event‐triggered sampling strategies, a new encoder is proposed, which consumes less feedback bits than the conventional time‐triggered encoders. It is proven that even in the existence of model uncertainty, external disturbances and network delay, the proposed event‐triggered sampling strategies require a lower feedback bit rate to stabilize the switched system than conventional periodic sampling methods. [ABSTRACT FROM AUTHOR]

This paper proposes a new algorithm based on sensitivity analysis and the Wolfe method to solve a sequence of parametric quadratic programming (QP) problems such as those that arise in quadratic model predictive control (QMPC). The Wolfe method, based on Karush–Kuhn–Tucker conditions, has been used to convert parametric QP problems to parametric linear programming (LP) problems, and then the sensitivity analysis is applied to solve the sequence of the parametric LP problems. This strategy obtains sensitivity analysis‐based QMPC (SA‐QMPC) algorithm. It is proved that the computational complexity of SA‐QMPC is O(Nn2)$O(Nn^2)$ for a region of the initial conditions and O(N2n2)$O(N^2n^2)$ for sufficiently small sampling time and all initial conditions, where N$N$ and n$n$ are the horizon time and dimension of the state vector, respectively. Numerical results indicate the potential and properties of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper considers the secure distributed control consensus problem of linear multi‐agent systems (MASs) under switching topologies, subject to intermittent sequential scaling attacks, which was compelled to scaling factor, attack frequency, duration and cooperative‐competitive networks. First, the scenario of a fixed topology is considered, and a novel control protocol combined with a logarithmic quantizer and relative state measurements of neighbouring agents is discussed. The sighed graph is utilized to characterize the communication topology determined by the information flow directions and captured by the graph Laplacian matrix. After that, sufficient conditions for effectiveness of the developed control methods in guiding the MASs to secure bipartite leader‐following consensus are constructed. Second, the scenario of switching topologies is considered, and it is derived that the secure bipartite consensus will be achieved if the designed state feedback control protocol with the scaling factor, the attack duration, attack frequency and switching signal are selected properly. At last, to prove the effectiveness of the designed controllers, a simulation example depended on the real‐word actual military is introduced. [ABSTRACT FROM AUTHOR]

In the field of optoelectronic tracking, precisely modeling the motion equations of the tracked target is often challenging, and in some cases, they may even be entirely unknown. This necessitates the use of a robust state estimator for accurate state estimation. Additionally, atmospheric turbulence, variations in illumination, and intricate observation backgrounds may introduce a significant increase in observation noise for the tracked target. To address these challenges, one approach is to introduce adaptive factors, such as the Mahalanobis method, into the robust state estimator to enhance estimation accuracy. However, further exploration has revealed that adaptive factors designed using different methods offer unique advantages in scenarios with varying levels of noise amplification. In this paper, different adaptive factors are further combined using an interacting multiple model approach, allowing the designed state estimator to exhibit stronger adaptability to noise amplification. The stability and effectiveness of this algorithm are validated through program simulations, double reflection mirror experiment, and drone trace prediction, demonstrating its applicability and reliability in diverse scenarios. [ABSTRACT FROM AUTHOR]

In the realm of evolutionary game theory, the majority of scenarios involve players with incomplete knowledge, specially regarding their opponents' actions and payoffs compounded by the ever‐shifting landscape of players' interactions. These dynamics present formidable challenges in both the analysis and optimization of game evolution. To address this, a novel model named the networked evolutionary game (NEG) is proposed based on incomplete information with switched topologies. This model captures situations where players possess limited insight into their opponents' benefits, yet make decisions based on their own payoffs while adapting to different networks and new players. To bridge the gap between incomplete and complete information games, R. Selten's transformation method is leveraged, a renowned approach that converts an incomplete information game into an interim agent game, thereby establishing the equivalence of pure Nash equilibria (NE) in both scenarios. Employing the semi‐tensor product (STP) of matrices, a powerful tool in logistic system, the evolution of the model is articulated through algebraic relationships. This enables to unravel the patterns of game evolution and identify the corresponding pure Nash equilibria. By introducing control players, strategically positioned within the game, optimized control is facilitated over the evolutionary trajectory, ultimately leading to convergence towards an optimal outcome. Finally, these concepts are illustrated with a practical example within the paper. [ABSTRACT FROM AUTHOR]

This paper considers the problem of communication protocols between leaders and its followers for motion planning in an initially partially known environment. In this setting, the leader observes the environment information to satisfy its own local objective and and the follower completes its own local objective by estimating the states of the leader and communicating with the leader to update its knowledge about the environment when it is necessary, where the local objectives can be expressed in temporal logic. A verifier construction is built first to contain all possible communication protocols between the leaders and the followers. Then, a two‐step synthesis procedure is proposed to capture all feasible communication protocol that satisfy the local objectives for the leader and follower, respectively. In the first step, a sub‐verifier is synthesized to satisfy the objective of the follower. In the second step, based on the obtained sub‐verifier, an iterative algorithm is proposed to extract communication protocols such that the objectives of the leader and follower are satisfied, respectively. A running example is provided to illustrate the proposed procedures. [ABSTRACT FROM AUTHOR]

The stabilization problem for uncertain discrete‐time singular Markovian jump systems (DSMJSs) with time‐varying delays is comprehensively covered in this paper. An updated Lyapunov–Krasovskii functional is presented via a discrete state decomposition method. With the help of this constructed Lyapunov–Krasovskii functional, some delay‐ and mode‐dependent sufficient conditions for the open‐loop DSMJSs are derived. Based on these circumstances, a memory mode‐dependent state feedback control is used to create a closed‐loop DSMJS with parameter uncertainties that is regular and causal. And then, the stochastically admissible conditions are attained. Through the exact calculation of each decomposition component for the designed memory state feedback controller, the intended memory state feedback controller settings are determined. It should be mentioned that the algorithm suggested in this article expands the controller design's feasibility and flexibility. The numerical results show how the approach is superior to previous ones, and the given results are less conservative. [ABSTRACT FROM AUTHOR]

This paper introduces a novel data‐driven approach to develop a fault‐tolerant model predictive controller (MPC) for non‐linear systems. By adopting a Koopman operator‐theoretic perspective, the proposed method leverages historical data from the system to construct a data‐driven model that captures the non‐linear behaviour and fault characteristics. The fault influence is addressed through an online estimation of a time‐varying Koopman predictor, which allows for adjusting the MPC control law to counteract the fault effects. This estimation is performed in a higher dimensional Koopman feature space, where the dynamics behave linearly. As a result, the non‐linear fault‐tolerant MPC optimization problem can be replaced with a more practical and feasible linear time‐varying one using the approximated Koopman predictor. Moreover, by incorporating the online update procedure, the time‐varying Koopman predictor can represent the dynamics of the faulty system. Hence, the controller can adapt and compensate for the faults in real‐time, integrating the fault diagnosis module in the MPC framework and eliminating the need for a separate fault detection unit. Finally, the efficacy of the proposed approach is demonstrated through case study results, which highlight the ability of the controller to mitigate faults and maintain desired system behaviour. [ABSTRACT FROM AUTHOR]

This paper is concerned with the stability analysis of discrete‐time systems with a time‐varying delay. The conservatism and computation burden are two important factors to evaluate a stability condition. By taking the relationship of two reciprocally convex parts into consideration, a new combined matrix‐separation‐based inequality is proposed that involves only a few free matrices. Moreover, an improved matrix‐injection‐based transformation lemma with the parameter varying within a closed interval is proposed by introducing only one free matrix. By constructing an appropriate Lyapunov–Krasovskii functional and applying the improved methods, a relaxed stability condition is consequently obtained with a small number of decision variables. Two numerical examples are given to show the merits of the proposed methods. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of achieving finite‐time fault‐tolerant consensus control for a class of non‐linear fractional‐order multi‐agent systems (NFO‐MAS) using finite‐time fault detection and estimation, as well as a finite‐time state observer. To achieve this, a specific lemma is utilized to rewrite the high‐order model of NFO‐MAS as a lower‐order NFO unique system. By employing new identification rules and introducing a fault estimation method, both the state variables and faults of the agents are estimated within a finite time. Subsequently, a finite‐time sliding mode control law is designed based on the estimated fault and the state variables obtained from the proposed finite‐time observer to achieve consensus within a finite time for the fractional‐order non‐linear MAS. The stability of the fault estimation, state observer, and consensus controller is proven using the finite‐time Lyapunov theory. The effectiveness of the proposed approach is demonstrated through numerical simulations. [ABSTRACT FROM AUTHOR]

This paper studies the control problem of free‐floating space manipulators, and a control scheme is proposed to solve reactionless control of the end‐effector pose tracking with parameter uncertainty and input disturbance. First, based on dual modeling to treat the end‐effector as a virtual base spacecraft, the dynamics with uncertainties are established which map the joints' torque to the end‐effector pose and base spacecraft attitude, while the inverse kinematics and the derivative of the generalized Jacobi matrix can be avoided in controller design. Then, the reference acceleration stabilization schemes satisfying prescribed performance constraints are carefully designed for tracking errors, and based on these schemes the steady‐state and transient performance of the tracking control can be guaranteed. Further, the radial basis function neural network is adopted to estimate modeling errors caused by parameter uncertainty and input disturbance. In addition, a concurrent learning method is introduced in the network weights matrix update law, which allows the estimation errors to converge a neighborhood of zeros without the need for satisfying the persistent excitation condition. The simulation results verify the effectiveness of the proposed control scheme. [ABSTRACT FROM AUTHOR]

In this paper, the problem of state estimation for systems over wireless networks using user datagram protocol is focused on. It is known that for such a system, the probability density function of the system state follows a Gaussian mixture model (GMM), and the number of components in this model grows exponentially over time, which makes the computation of optimal estimates infeasible. To compute optimal estimates, based on Kullback‐Leibler divergence, a strategy with variable step‐sizes to truncate and fuse the GMM is proposed. Based on the obtained GMM, a variable step‐size estimator is designed to compute optimal estimates during an estimation cycle. The advantages of the proposed estimator are twofold: (1) its estimation performance is superior to that of existing one‐step fast estimators; (2) its estimation efficiency is much higher than that of the optimal estimator. Finally, trajectory tracking has been proposed for a real‐world hydrogen‐powered unmanned aerial vehicle to show the effectiveness of our methods. [ABSTRACT FROM AUTHOR]

This paper proposes explicit solutions for the algebraic Riccati matrix equation. For single‐input systems in controllable canonical form, the explicit Hermitian solutions of the non‐homogeneous Riccati equation are obtained using the entries of the system matrix, the closed‐loop system matrix, and the weighting matrix. The unknown entries of the closed‐loop system matrix are solved by scalar quadratic equations. For a homogeneous Riccati equation with a zero weighting matrix, the explicit solutions are proposed analytically in terms of the system eigenvalues. The advantages of the explicit solutions are threefold: first, if the system is controllable, the solution is directly given and the invariant subspaces of the Hamiltonian matrix are not required; second, if the system is near singularity, the explicit solution has higher numerical precision compared with the solution computed by numerical algorithms; third, for a real system in the controllable canonical form, the non‐negativity can be analysed for the explicit almost stabilizing solution. [ABSTRACT FROM AUTHOR]

This paper investigates the design of a model‐free adaptive iterative learning controller(MFAILC) based on sampled‐data under the presence of denial‐of‐service(DoS) attacks in nonlinear networked control systems. First, the MFAILC is presented only using I/O data, where a compensation mechanism for DoS attacks is proposed. With dynamic linearization techniques, the nonlinear system is transformed into a linear system in the iteration domain. Then an improved MFAILC is designed to actively compensate the lost data caused by DoS attacks, where the estimation of pseudo‐partial derivative (PPD) is improved by establishing the AR model. The proposed algorithm can weaken the adverse effects of the DoS attacks and ensure the excellent tracking performance of the system. Finally, the stability of the method is proved, and the effectiveness of the proposed algorithm is demonstrated by a numerical example. [ABSTRACT FROM AUTHOR]

In this paper, a novel nonlinear unknown input observer is proposed in order to fault estimation for nonlinear uncertain systems with time delays. By the estimation of the faults, the features are detected such as shape, size occurrence time etc. The time delay is considered a constant and known parameter in the states. The disturbances are investigated in the states and outputs and also, and sensor and actuator faults are considered. The stability of the closed‐loop system is guaranteed by Lyapunov–Krasovskii theory and some feasible Linear matrix inequalities (LMI). The proposed method is simulated on a continuous‐stirred tank reactor (CSTR) with uncertainties and time delay. Simulation results show the appropriate efficiency of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a novel detection and rerouting mechanism for distributed adaptive platoon control of non‐linear autonomous connected vehicles under denial of service (DoS) attacks. DoS attacks can cause delays or losses of data packets due to blocked communication channels, leading to reducing platoon performance or even collisions among vehicles. To tackle this issue, the proposed mechanism detects and reroutes communication topology depending on the real‐time topology and the number of link failures. Real‐time detection divides the scenario of DoS attacks into three parts. According to the different scenarios, rerouting mechanisms will be utilized. A controller adapted to real‐time variable communication topology is also designed in this scheme. The adjacency matrix of the real‐time communication topology generated by the rerouting mechanism is used to update the controller so that the platoon can remain in a stable state without being affected by DoS attacks. In addition, the sliding mode controller and the observer are designed by solving linear matrix inequalities, and the platoon stability and internal stability are proven. Numerical simulation studies demonstrate that the proposed mechanism and control design can reduce the vehicle state estimate error and platoon‐tracking error to ideal states under DoS attacks. The proposed method solves the problem that the existing methods have not considered the number of link failures and the inability to restore communication when the communication topology is paralyzed. [ABSTRACT FROM AUTHOR]

This paper presents a model predictive control (MPC) approach based on the extended disturbance observer (EDOB) for trajectory tracking of a coaxial octorotor unmanned aerial vehicle (UAV). First, the system dynamic model is derived using Newton–Euler relations in the presence of time‐varying centre of gravity (COG); then, a two‐loop cascade structure is presented to perform the trajectory tracking task. Both loops are controlled using MPC with feedforward compensation based on the EDOB to improve disturbance rejection abilities. When the mass changes, the moment of inertia and COG are affected. The EDOB simultaneously estimates the effects of time‐varying mass, external disturbances, and parametric uncertainties in six degrees of freedom. After obtaining virtual control inputs using designed controllers, constrained control allocation is used to obtain rotors speed in a valid range. The proposed control scheme is evaluated using simulation. The simulation results show the ability of the developed control strategy in accurate trajectory tracking and stable flight in different conditions and being robust to uncertainty and disturbance. [ABSTRACT FROM AUTHOR]

This paper addresses the tracking control for an extended chained nonholonomic system under input saturation and matched disturbances. Specifically, the tracking error dynamic system is split into two subsystems in a cascade form. An integral sliding mode saturated controller is designed in combination with a finite‐time observer (FTDO) to ensure the finite‐time stability of the first subsystem, thereby simplifying the design of the second subsystem. A backstepping‐based adaptive saturated tracking control method is proposed for the second subsystem by incorporating the filter technology. The stability of the resulting closed‐loop system is demonstrated, and the tracking errors can be arbitrarily minimized through the appropriate design parameter selection. The effectiveness of the proposed scheme is validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

In biological systems, impulses are often used to model mutations in gene expression. In order to describe the instantaneity of the impulse, this paper employs a hybrid‐index model of impulsive Boolean networks with state‐triggered impulses. Based on this model, the time‐domain output controllability is investigated. Using the quotient mapping method, the hybrid‐domain solutions of this model are mapped to the time‐domain solutions, mathematically. Then a necessary and sufficient condition for output controllability in the time domain is presented. Finally, an example is given to demonstrate the correctness and effectiveness of the obtained results. [ABSTRACT FROM AUTHOR]

This paper studies the event triggered delayed impulsive control strategy for quasi‐synchronization for complex dynamical systems with parameter mismatch and packet loss. By constructing a comparative lemma with time delays and Lyapunov function, a few sufficient synchronization conditions are proposed by Cauchy matrix with time delays to analyze the system. Meanwhile, the possibility of packet loss is also considered and the quasi‐synchronization of the system is investigated by using both event triggered delayed impulsive control and self‐triggered impulsive control mechanisms. Theoretical analysis results are validated by numerical simulations. [ABSTRACT FROM AUTHOR]

In this paper, the prescribed tracking performance control problem is addressed for uncertain nonlinear systems with unknown periodically time‐varying parameters and arbitrary switching signal. By utilizing radial basis function neural network and fourier series expansion, an approximator is developed to overcome the difficulty of identifying unknown periodically time‐varying and nonlinearly parameterized functions. To achieve the ideal tracking control performance and eliminate the influence of filtering error, a novel command filter‐based adaptive neural network prescribed tracking performance controller is designed by introducing a filtering compensation mechanism. Differently from the standard Backstepping technique, the proposed control scheme eliminates the "explosion of complexity" problem and relaxes the constraint condition on the reference signal. And then, it is warranted that the closed‐loop system is semi‐globally ultimately uniformly bounded and the tracking error is always limited to the specified region bounded by the performance functions. Three simulation examples are used to demonstrate the feasibility of the developed technique in this paper. [ABSTRACT FROM AUTHOR]

In order to improve the efficiency of autonomous robot sorting steel ingots, this paper proposes a two‐dimensional weighted equivalent clustering‐based progressive probabilistic hough transform (2D‐WEC‐PPHT) algorithm for the problem of identifying and locating strip ingots in automatic picking strip ingot palletizing. First, the steel ingot image is preprocessed and the PPHT linear detection method is used to extract the edge linear information of the steel ingot. Second, the angle and position information are normalized and weighted, and a two‐dimensional clustering distance calculation method is proposed for two‐dimensional clustering of the extracted line information. Besides, the clustering line clusters with close angles were processed into equivalent lines by mean fitting. Then, the average threshold method was used to segment the ingot between each two fitting lines, and the minimum rectangle was used to box the segmentation part. The centroid of the box‐selected rectangle is the positioning center of the ingot, and the long side angle of the box‐selected rectangle is the deviation angle information of the ingot. Finally, the experimental results show that the number of redundant lines detected by the 2D‐WEC‐PPHT is significantly less than that of traditional methods such as HT and PPHT. The positioning speed of ingot is faster than that of HT and PPHT, and the processing time is reduced from 20 s to 10 s. In the case of large proportion of old ingots with weak reflection, the recognition accuracy reached 93.5%, and the angular and position positioning accuracy were 2.270° and 11.675 mm, respectively. The recognition accuracy of new ingots with strong reflection reached 99.574%, which met the requirements of picking positioning accuracy. In order to improve the efficiency of autonomous robot sorting steel ingots, this paper proposes a two‐dimensional weighted equivalent clustering‐based progressive probabilistic hough transform (2D‐WEC‐PPHT) algorithm for the problem of identifying and locating strip ingots in automatic picking strip ingot palletizing. [ABSTRACT FROM AUTHOR]

This paper proposes a Modified model reference adaptive controller and observer (MMRACO) for unknown linear time‐invariant (LTI) systems. The recent literature, and in particular the so‐called MRACO approach, has demonstrated how some deficiencies in standard model reference adaptive control can be overcome by using a combination of modified reference models and observers, but this is done at the expense of knowing bounds on certain unknown parameters. Here, a novel adaptive observer/controller combination is presented which removes the need to know the above bounds but preserves the other desirable features of the MRACO approach. A Lyapunov analysis of the closed‐loop system ensures asymptotic convergence of both tracking and observer errors, with uniform boundedness of parameter estimation errors. A key advantage of the scheme is that the design involves only solutions of two Lyapunov equations (or linear matrix inequalities) and does not require the selection of a "high gain" parameter. The effectiveness of the approach is illustrated in some numerical examples. [ABSTRACT FROM AUTHOR]

The development of an autotuning mechanism for robotic manipulators, inspired by the success of autotuners in industrial systems, aims to reduce the time and cost of tuning robotic manipulators. This paper introduces an auto‐tuning method for PID controllers in robotic manipulators using the Modified Relay Feedback Test (MRFT) and the Optimization Under Uncertainty (OUU) principle. The mechanism is versatile, suitable for manipulators of varying scales and motor power capacities. It incorporates actuator dynamics and a combined model of Brushless DC motors with an n‐link manipulator for TR development. Various manipulator models, including commercial and open‐source types were used to refine and test the TR. An algorithm is also proposed for tuning commercial manipulators' controllers without changing the existing closed‐loop system structure. Experimental and simulation tests demonstrate the method's effectiveness, showing better performance than traditional approaches, particularly in reducing overshoot and settling time. [ABSTRACT FROM AUTHOR]

In this paper, the trajectory tracking problem of controlling a constrained quadrotor with unmeasurable system states in an environment with stochastic wind‐gust disturbance is considered. The mathematical model of the quadrotor is divided into the translational system and the rotational system, while only the measurement output of the quadrotor can be accessed. A new output‐based control method is developed for solving this problem. In the translational control system, an output feedback stochastic model predictive control (MPC) algorithm is proposed to generate the optimal control sequence with less conservativeness, by taking into account the information on the distribution of the disturbances and the uncertainty resulting from the attitude tracking error. The closed‐loop probabilistic constraints satisfaction, the recursive feasibility and the stability of the algorithm are further proved. In the rotational system, the active disturbance rejection control (ADRC) method to estimate and compensate for external disturbances is leveraged and robust control for attitude tracking is accomplished. The convergence of the disturbance estimator and the stability proof are provided. Finally, the robustness and effectiveness of the proposed control strategy are verified by an illustrative example. [ABSTRACT FROM AUTHOR]

This paper addresses fault pattern diagnosis of discrete event systems, involving fault pattern detection and diagnosability. A fault pattern is modelled as a finite automaton whose accepted language is the objective to be diagnosed, representing the occurrence of complex or composite faults. A verifier for fault pattern detection based on the synchronous product of a system and a fault pattern is proposed. By removing all silent events, a silent closure is calculated based on the synchronous product, which offers computational advantages for systems that have a large number of silent events. An NSC/FSC pair verifier is then computed by taking the product of a normal silent closure and an accepted silent closure. By studying indeterminate cycles of the NSC/FSC pair verifier, necessary and sufficient verification conditions are established, asserting that a system is diagnosable with respect to a fault pattern if and only if there is no indeterminate cycle in the NSC/FSC pair verifier. It is shown that the proposed method requires polynomial time at most. Finally, a case study to illustrate the results is provided. [ABSTRACT FROM AUTHOR]

This paper deals with the orbit tracking and formation motion problems with optimal energies and reduced computational cost. First, the orbit tracking and formation motion are decomposed into movements in the normal and tangent directions of level orbits, respectively, and simultaneously, the optimal value functions in both directions are defined. Then, to reduce the computational cost, a switching threshold event‐triggered (STET) mechanism is designed. Based on the STET mechanism, the optimal value functions are constructed to evaluate the optimal energies of orbit tracking and formation motion. Critic neural networks are then designed to approximate the optimal value functions, which yield the optimal policies along the normal and tangent directions of desired orbits, that is, a so‐called switching threshold event‐triggered critic algorithm (STET‐C). Theoretical analysis of system convergence is given in detail. Finally, two comparison simulations are given. The former intends to verify the optimal energy of STET‐C compared to the feedback controllers. The latter shows that STET‐C significantly reduces the computational cost in contrast with the non‐triggered actor‐critic algorithm, non‐triggered critic algorithm, and the relative threshold event‐triggered critic algorithm. [ABSTRACT FROM AUTHOR]

This paper investigates the robust model reference tracking control problem for high‐order descriptor linear systems (HODLS) subject to norm‐bounded parameter uncertainties. The problem is divided into two subproblems: a robust proportional plus derivative state feedback stabilization (RPPDSFS) problem and a robust feed‐forward compensation (RFFC) problem. In the presence of uncertainties, by using the controller consisting of RPPDSFS part and RFFC part, all the signals of the closed‐loop system are bounded. The latter is equivalent to seeking three coefficient matrices such that a series of linear matrix equations are satisfied, and simultaneously the effect caused by uncertainties is minimized. Based on the right coprime factorization, the RFFC problem is further converted into a minimization problem with a quadratic performance index and some linear constraints. Thereafter, a linear matrix equation that determines the optimal solution is achieved. The restrictive condition that the coefficient matrix of the augmented reference system is non‐defective is relaxed, which reduces the conservativeness. A numerical example and the application of a three‐axis dynamic flight motion simulator manifest the effectiveness and the practicability of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The shaking table test has been widely recognized as one of the most reliable methods for assessing the dynamic response of structures and systems when exposed to a range of vibrations. Replicating these vibrations, recorded as acceleration signals, necessitates precise controller designs. However, traditional controller designs primarily rely on linear system assumptions, leading to complications in incorporating parametric uncertainty and uncertain non‐linearity. This paper presents a novel approach to the acceleration trajectory control problem of single‐axis hydraulic shaking table systems from a non‐linear perspective. This strategy employs a controller combined with an extended state observer (ESO) and adaptive control, offering a design that more closely reflects real‐world scenarios and requires less parameter adjustment. The ESO estimates the uncertain non‐linearity using the displacement signal, while the parametric uncertainty is tackled through adaptive control. The proposed controller's effectiveness is validated through theoretical proof using Lyapunov analysis. The analysis demonstrates that asymptotic tracking performance is guaranteed when the uncertain non‐linearity is time‐invariant. Moreover, with time‐variant uncertain non‐linearity, the controller can also ensure both prescribed transient tracking performance and final tracking accuracy. Comparative experiment results underscore the superior performance of the proposed controller. [ABSTRACT FROM AUTHOR]

This paper addresses an investigation into a leader‐following consensus problem in a novel multi‐agent‐based SIS (Susceptible‐Infected‐Susceptible) epidemic model. As infectious diseases are easily spread through travel, the model considers each agent to represent a city in an infected country, interacting with neighbouring cities towards achieving disease eradication through consensus. To make the model more realistic, the Effect Terms (ETs) arising from the effects of agent states on each other are also considered. The differential equations' positivity and existence of solutions are examined, and the proposed model's equilibrium points are obtained, with stability analysed using new local and global basic reproduction numbers defined in this study. Additionally, a leader‐following consensus control for the multi‐agent‐based system is proposed to drive each agent to follow a virtual leader agent. Finally, numerical simulations are included to validate the theoretical findings corresponding to the proposed scheme. [ABSTRACT FROM AUTHOR]

This paper considers the problem of robust stabilization of linear time‐invariant systems with respect to unmodelled dynamics and structure uncertainties. To that end, a methodology to find the nearest negative imaginary system for a given non‐negative imaginary system is presented first. Then, this result is employed to construct a near optimal linear quadratic Gaussian controller achieving desired performance measures. The problem is formulated using port‐Hamiltonian method and the required conditions are defined in terms of linear matrix inequalities. The technique is presented using the fast gradient method to solve the problem systematically. The designed controller satisfies a negative imaginary property and guarantees a robust feedback loop. The effectiveness of the approach is demonstrated by a simulation on a numerical example. [ABSTRACT FROM AUTHOR]

This paper addresses the consensus problem of first‐order continuous‐time multi‐agent systems over undirected graphs. Each agent samples relative state measurements in a self‐triggered fashion and transmits the sum of the measurements to its neighbours. Moreover, we use finite‐level dynamic quantizers and apply the zooming‐in technique. The proposed joint design method for quantization and self‐triggered sampling achieves asymptotic consensus, and inter‐event times are strictly positive. Sampling times are determined explicitly with iterative procedures including the computation of the Lambert W‐function. A simulation example is provided to illustrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Controlling the Permanent Magnet Synchronous Motor (PMSM) can be challenging due to the nonlinearity of its dynamics, which makes it difficult to design control strategies that are both robust and effective. To address this challenge, this paper presents a novel control strategy rooted in the concept of passivity that combines field‐oriented control (FOC). This strategy compels the PMSM to accurately follow velocity and electrical torque trajectories. The approach, known as passivity‐based control (PBC), entails reshaping the inherent system energy while introducing the necessary damping to attain the desired objectives. A crucial aspect involves identifying workless force terms within the process model. Despite their presence, these terms do not impact the energy balance and stability properties. As a result, eliminating these terms is unnecessary. This simplicity in control architecture not only preserves system stability but also bolsters overall robustness. The system's overall stability and the current tracking error's exponential convergence have both been demonstrated analytically. In order to maintain stability, the controller accounts for the nonlinearities of the plant and approximates the unstructured dynamics of the PMSM. The proposed control is designed using the dq model of the PMSM, which avoids the model's structure destruction due to singularities, since the dq model does not depend explicitly on the rotor angular position. Experimental results shown further, illustrate speed and position control with a desired pair calculated by a filter or a proportional‐integral (PI) controller for speed control and a proportional‐integral‐derivative (PID) controller for position control. Also the correlation between practical and theoretical results is given as well as the robustness test in relation to the uncertainties of the PMSM's inertia moment. The results demonstrates the effectiveness of the proposed strategy in controlling the PMSM under different operating conditions, highlighting its potential for industrial applications. [ABSTRACT FROM AUTHOR]

This paper presents a new fuzzy non‐singular fast terminal decoupled sliding mode control based on the finite‐time extended state observer for trajectory tracking control of flexible joint robot manipulators under chaos and uncertainty. First, a suitable chaotic reference is used in a synchronization mechanism to create chaos in the dynamics. Then, the essential modifications made to the conventional decoupled sliding mode control are introduced. A new coupling variable and a non‐singular fast terminal sliding surface are proposed in combination with an extended state observer. A complete convergence analysis is also performed for all the sliding surfaces. Furthermore, two fuzzy systems are designed in such a way that not only they can eliminate the chattering phenomenon but can also improve the convergence time without increasing the control input in a voltage‐based manner. The mathematical proof guarantees the finite‐time asymptotic stability of the closed‐loop control system under the proposed scheme for a class of under‐actuated systems in the presence of structured and un‐structured uncertainties. Finally, some simulations and experimental implementations as hardware‐in‐the‐loop are performed to evaluate the proposed method's performance. The proposed controller is an effective method, as confirmed by the numerical simulation results and experimental validation. [ABSTRACT FROM AUTHOR]

In this paper, an optimal distributed guidance law is proposed for cooperatively intercepting a manoeuvering target in three dimensional (3D) framework. Based on the 3D kinematic model of interceptors and the target, the kinematic engagement equations in line‐of‐sight (LOS) coordinate can be obtained. Along the LOS direction, a finite‐time consensus based on directed communication topology is applied to guarantee arrival‐time coordination of multiple interceptors, and sliding mode control is adopted to compensate target manoeuver. In the plane perpendicular to LOS, optimal control is used to design guidance law such that closed‐loop LOS angular rates converge to a tunable small neighbourhood of zero. The proposed cooperative guidance law is proved in theory, and its effectiveness is verified by simulations. [ABSTRACT FROM AUTHOR]

The interior permanent magnet synchronous motor traction system of rail vehicles usually needs to run above base speed. It is necessary to implement high‐efficiency flux weakening control of the traction motor. This paper presents one single current regulation square wave strategy, which can improve the dynamic performance of the flux weakening control of the interior permanent magnet synchronous motor traction system. By proposing a novel switching criterion and the modulation method, smooth switching between the maximum torque per ampere control below base speed and the square wave control above base speed can be realized. Simulation and experimental results demonstrate the correctness and effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This paper proposes a non‐singular fixed‐time fault‐tolerant adaptive tracking control method for a kind of multi‐input and multi‐output nonlinear system, which is in form of non‐strict feedback and is subject to actuator faults. The major contribution, compared to other practical fixed‐time fault‐tolerant control methods, is that the fixed time can be calculated precisely. By applying fuzzy logic systems, the identification of unknown nonlinearities is achieved, and by the boundness of fuzzy basis functions, the algebraic loop problem is avoided. Based on the fixed‐time stability theory, the practical fixed‐time fault‐tolerant adaptive tracking control method is proposed with adaptive back‐stepping control technology, in which the control singular problem is overcome by applying the adding power integration method. By the Lyapunov function theory, the practical fixed‐time stability of the closed‐loop system is theoretically proved. And even in the case of unknown actuator faults, the tracking error of the controlled system for the given command signal can still converge to a small neighbourhood of zero within a fixed time, regardless of the system initial state. Finally, the proposed control method is successfully implemented on a multi‐motor control platform, proving its effectiveness, and multiple comparative simulations are carried out, demonstrating its superiority. [ABSTRACT FROM AUTHOR]

The paper expounds the question of echo state network‐based fixed‐time adaptive tracking control for a type of multi‐input multi‐output nonlinear strict‐feedback system with input delayed saturation. Based on the feature that echo state network can obtain better estimation performance at lower computational cost, it is utilized to approximate the unknown nonlinear function in the controller design course. By constructing an auxiliary system, a time‐delay system with input saturation is eliminated. Moreover, command filtering techniques can be applied to avoid the "complexity explosion" problem in the backstepping method. Then, the closed‐loop system is attested to be semi‐global practical fixed‐time stable. In the end, a simulation shows the valid scheme. [ABSTRACT FROM AUTHOR]

This paper proposes, a novel decentralized fuzzy filter design for nonlinear large‐scale systems with uncertain interconnections. Based on Takagi–Sugeno (T–S) fuzzy model, the error system is represented by filter error and filter state variables, and the H∞$H_{\infty }$ filtering problem is defined. By using the Lyapunov functional, the stability condition of the error system with H∞$H_{\infty }$ performance is obtained to solve the H∞$H_{\infty }$ filtering problem, and its sufficient condition is converted into the linear matrix inequality (LMI) formats. Furthermore, the decentralized fuzzy filter design technique is also presented for the non‐measurable premise variable case. Finally, an example is provided to verify the effectiveness of the proposed decentralized fuzzy filtering techniques. [ABSTRACT FROM AUTHOR]

This paper investigates the learning and control problem of sampled‐data systems with only output measurements. A unified approach is presented by integrating the sampled‐data observer and deterministic learning. First, an adaptive radial basis function network (RBFN) learning controller with a sampled‐data observer is designed to track a recurrent reference model. Along the trajectory estimated by the observer, it is proven that the RBFN weights can exponentially converge to their ideal values with the satisfaction of a persistent excitation (PE) condition and the closed‐loop dynamics can be accurately learned during the output‐feedback process. Second, by using the learning results, a knowledge‐based output‐feedback controller is developed to improve the tracking performance. Further research shows that choosing appropriate parameters for the observer and RBFN can guarantee learning and control performance. The significance of the proposed approach is that the closed‐loop dynamics of the output‐feedback process can be accurately learned and further utilized to improve control performance. Simulation studies indicate the effectiveness and advantages of the learning control approach. By combining deterministic learning and sampled‐data observer, an adaptive radial basis function network (RBFN) controller is designed to achieve the tracking of a recurrent reference model, which leads to the satisfaction of the PE condition. During the stable tracking process, closed‐loop dynamics can be accurately identified/learned by the RBFN under the PE condition. Based on the learned dynamics, a new knowledge‐based controller is developed for another output feedback task, which reduces computational complexity and improves tracking performance. [ABSTRACT FROM AUTHOR]

In Industry 4.0, the innovative concept of a smart warehouse is defined as a progressive development in logistics and operations management. Numerous advanced techniques are recommended for integration, including wearable devices, communication, loading/unloading, optimization, robotics, and automated transportation, among others. Currently, the growing demand for swift cargo distribution, cost‐effective labour utilization, and enhanced productivity stands as an urgent topic for both enterprises and scholars. This paper presents an EtherCAT‐based model of automated guided vehicle (AGV)‐manipulation introduced within the Unity platform for smart warehouse management. The working environment selected for this model is a cross‐docking warehouse with a chessboard layout. Initially, theoretical computations pertaining to mechanical design are established to provide accurate parameters. Subsequently, the structure of the TwinCAT Human–Machine Interface Server and the configuration within the Unity environment are outlined. Following that, the software architecture, encompassing data exchange and a set of motion commands, is meticulously explained. To validate the proposed approach, several laboratory tests are conducted under identical conditions. This research offers several contributions: firstly, it introduces the innovative use of real‐time technology to represent AGV systems; secondly, it elucidates the potential connection between virtual reality and the physical model; and thirdly, it employs fluid motion techniques to illustrate and visualize driving performance. These findings hold significant promise not only for the advancement of smart warehouse management but also for the broader landscape of digital trade. [ABSTRACT FROM AUTHOR]