Search

An overview is presented of displacement damage (DD) effects, total-ionizing-dose (TID) effects, and single-event effects in AlGaN/GaN high electron mobility transistors (HEMTs). High-fluence proton-induced DD creates point defects and impurity complexes at fluences that are comparable to or higher than those encountered in space applications. Defect and impurity dehydrogenation also contributes significantly to the DD/TID response at fluences typical of realistic space environments. The bias applied during irradiation can affect the DD/TID response strongly. Bias stress before irradiation can lead to enhanced proton-induced degradation of AlGaN/GaN HEMTs. Low-frequency noise measurements and density functional calculations provide insight into defect microstructures and energy levels. GaN-based HEMTs can be quite vulnerable to single-event effects in space. Of particular concern is single-event burnout (SEB). The vulnerabilities of GaN-based devices to SEB at voltages below rated limits and significant device-to-device variations in SEB response lead to significant voltage derating for GaN-based power devices in space systems. Developing an improved understanding of the effects of defects and hydrogen on the radiation response of AlGaN/GaN HEMTs can improve the DD/TID response by reducing threshold-voltage shifts and transconductance degradation. Reducing defect densities may also reduce the variation in SEB response, enabling reliable device operation at higher voltages in future space systems. [ABSTRACT FROM AUTHOR]

Gallium nitride (GaN) has attracted great attention as a structural material for advanced microelectromechanical systems (MEMS), thanks to its excellent ensemble of electrical and mechanical properties. Here, we report on studying the effects of ion radiation-induced displacement damage on resonant MEMS made of GaN film grown on aluminum nitride (AlN) buffer layer. We design and fabricate GaN/AlN heterostructure doubly-clamped microstring resonators with length $L \,\, =100$ , 200, 300, 400, 500, 600, and 700 $\mu \text{m}$ , and irradiate the devices with 440-keV Ar $^{+}$ ions, to probe the effects of ion radiation-induced displacement damage on the resonance behavior. The ion energy and range have been selected so that the ions would stop within the GaN layer, thus allowing diagnostics to show the effects of damage in the structure. The multimode resonance frequencies of the devices decrease significantly ($\vert \Delta f\vert /f >50$ %) with the increase of fluence beyond 1014 cm−2. According to scanning electron microscopy (SEM) imaging, the irradiated GaN/AlN resonators are visibly deformed at high fluence, where the amount of curvature increases monotonically with the fluence. The deformation of the structures can be ascribed to the change in both Young’s modulus and built-in stress resulting from ion radiation-induced displacement damage. The results extend the understanding of radiation-induced damage mechanisms in resonant MEMS. [ABSTRACT FROM AUTHOR]

Analog-to-digital converters (ADCs) with different topologies respond differently to total ionizing dose (TID). A flexible behavioral modeling approach is proposed for system-level simulation of TID effects in successive-approximation-register (SAR) ADCs. The radiation-enabled approach can be adapted for a wide range of ADCs of various resolutions, clock speeds, and manufacturers. The empirical model is calibrated and validated, pre-rad and post-rad, for a particular ADC. Pre-rad calibration is performed by introducing distributions of static parameters corresponding to datasheet specifications. The post-rad calibration is accomplished by introducing error sources associated with the comparator and digital-to-analog converter (DAC), corresponding to experimental data. The calibrated model is used to examine the dynamic performance and to estimate the probability of parametric failure during the mission lifetime. [ABSTRACT FROM AUTHOR]

Heavy-ion measurements are used to define a multiply nested sensitive-volume model for a 180-nm static random access memory (SRAM) test structure using the Monte Carlo radiative energy deposition (MRED) tool. We demonstrate that the fundamental assumptions of simple rectangular-parallelepiped (RPP) or integral-RPP models are inappropriate for single-event latchup (SEL) in this test structure, indicating that more advanced modeling is needed. We develop an MRED model that agrees well with latchup data at normal incidence and at roll and tilt angles of 60°. This process should facilitate estimates of SEL cross section and event rates for this and similar technologies in space environments. [ABSTRACT FROM AUTHOR]

Variability of the solar energetic particle environment is investigated for single-event burnout (SEB) reliability of silicon carbide power metal-oxide-semiconductor field-effect transistors. A probabilistic assessment of failure evaluates the benefits of derating voltage, shielding, and mission length. The Prediction of Solar particle Yields for Characterizing Integrating Circuits code is used to calculate a cumulative density function for the fluence of the environment. The lethal ion method is then used to determine what proportion of the environment will cause SEB. The operating voltage determines the lowest linear energy transfer (LET) particle that will cause SEB, and that should be included in the environment distribution. The shielding and mission length also determines the final environment distribution of the mission fluence. When the critical LET for a device is relatively low for the expected mission environment, the method in this article can calculate the probability of failure from a destructive event. The calculated probability of failure enables the consideration of part use outside the safe operating area, especially when derating the operating voltage would eliminate the technology advantage of the part. [ABSTRACT FROM AUTHOR]

Silicon-on-insulator latch designs and layouts that are robust to multiple-node charge collection are introduced. A general Monte Carlo radiative energy deposition (MRED) approach is used to identify potential single-event susceptibilities associated with different layouts prior to fabrication. MRED is also applied to bound single-event testing responses of standard and dual interlocked cell latch designs. Heavy ion single-event testing results validate new latch designs and demonstrate bounds for standard latch layouts. [ABSTRACT FROM AUTHOR]

Lighter doping, pretreatment (exposure to hydrogen in a steam bath), and lower dose rate are each found to exacerbate 10-keV X-ray-induced negative frequency shifts and increase in resistivity measured in T-shaped, asymmetric, piezoresistive, micromachined, and resonating cantilevers. All devices recover to levels close to preirradiation after several hours of postirradiation annealing. The effects are attributed to dose-rate-dependent efficiencies of the depassivation of dopants by hydrogen and surface charging effects, which alter the effective Young’s modulus and shear elastic constants. Increases in resistivity are attributed to increases in scattering causing decreases in mobility. Results indicate the need to consider dopant type and concentration when choosing microelectromechanical systems for use in radiation environments in addition to accounting for low-dose-rate effects. [ABSTRACT FROM AUTHOR]

The radiation response of complementary metal–oxide–semiconductor (CMOS) gate oxides is typically insensitive to true dose-rate effects, but damage in deep-sub-micrometer technologies is dominated by ionization mechanisms in thick isolation oxides surrounding the transistors. Recent results in 65-nm FETs demonstrated that performance degradation in ultrahigh total ionizing dose (TID) experiments is due to defects in the isolation shallow trench isolation oxide or in the materials composing the lightly doped drain spacers. These insulators are thick, deposited, and crossed by a low electric field, characteristics similar to those typical of passivation oxides in linear bipolar technologies for which an enhanced low-dose-rate sensitivity (ELDRS) has been observed and systematically studied. We report in this paper the clear evidence of a dose-rate sensitivity of the TID-induced damage in both 130- and 65-nm CMOS technologies exposed to different radiation sources (X-rays and $\gamma $ -rays from a 60Co source). This sensitivity is attributed to mechanisms similar to those explaining ELDRS in bipolar devices and represents a significant challenge to the definition of a qualification procedure for circuits to be used in extreme radiation environments. [ABSTRACT FROM AUTHOR]

Total-ionizing-dose-induced resonance frequency shifts in piezoresistive micromachined cantilevers are experimentally shown to be dose-rate dependent. Devices were irradiated to 1 Mrad(SiO2) at rates from 5.4 to 30.3 krad(SiO2)/min, with lower rate exposures producing up to four-times more negative frequency shifts than higher rate exposures. Devices that were hydrogenated in a steam bath for 1 h showed shifts similar to those of control (not hydrogenated) devices at higher dose rates, and larger shifts than control devices at lower rates. All devices recovered to levels close to preirradiation after several hours of post-irradiation annealing. The dose-rate dependence is attributed to differences in carrier concentration caused by varying efficiencies of the depassivation of boron by hydrogen at higher and lower dose rates and/or surface charging effects, and the subsequent differences in Young’s modulus that occur as a result. Many of these processes are similar to effects that lead to ELDRS in linear bipolar transistors, emphasizing the need to include low-dose-rate testing of microelectromechanical systems devices when considering them for use in space systems. [ABSTRACT FROM PUBLISHER]

A probabilistic Bayesian modeling method for determining the effects of radiation-induced component-level parameter shifts on system-level performance is described. The modeling method incorporates information about the system design and component-level degradation into a Bayesian network and performs inference on the constructed network using Markov chain Monte Carlo approaches, producing distributions for the range of component responses. Deterministic simulations use the results of the Bayesian inference to determine the combined impact of multiple degraded components on system performance quantities. The goal of the modeling approach is to turn uncertain information into actionable knowledge. The utility of this approach is demonstrated using a case study based on total ionizing dose degradation of line-sensor components in a simple line-tracking robot system. [ABSTRACT FROM PUBLISHER]

MRED is a Python-language scriptable computer application that simulates radiation transport. It is the computational engine for the on-line tool CRÈME-MC. MRED is based on c++ code from Geant4 with additional Fortran components to simulate electron transport and nuclear reactions with high precision. We provide a detailed description of the structure of MRED and the implementation of the simulation of physical processes used to simulate radiation effects in electronic devices and circuits. Extensive discussion and references are provided that illustrate the validation of models used to implement specific simulations of relevant physical processes. Several applications of MRED are summarized that demonstrate its ability to predict and describe basic physical phenomena associated with irradiation of electronic circuits and devices. These include effects from single particle radiation (including both direct ionization and indirect ionization effects), dose enhancement effects, and displacement damage effects. MRED simulations have also helped to identify new single event upset mechanisms not previously observed by experiment, but since confirmed, including upsets due to muons and energetic electrons. [ABSTRACT FROM AUTHOR]

The impact of high-Z metals on energy deposition in thin volumes due to direct ionization by ions in space environments is examined. The importance of energy loss straggling in small volumes typical of those found in advanced devices is also evaluated. It is found that direct ionization by protons over a large energy range may contribute significantly to error rates in advanced silicon on insulator devices due to energy loss straggling. This improves on conventional event rate analysis based on linear energy transfer, which does not describe the contributions of direct ionization by protons to the error rate. [ABSTRACT FROM AUTHOR]

The total-ionizing-dose robustness of low power microcontrollers is investigated. Experiments reveal that with increasing total ionizing dose (TID), the “Timing Window Violations,”i.e., inability of the instruction set to execute within the clock-cycle(s) lead to failures in microcontroller operations. Clock frequency and supply voltage of the microcontroller are varied to determine the maximum clock frequency at which the microcontroller can execute software subroutines without failure. Low power microcontrollers from two different manufacturers were tested. The maximum clock frequency decreases with increasing TID for both parts. A model for the degradation based on analysis of circuit level timing models is presented. The microcontroller robustness implications for system designers and ASIC designers are discussed. [ABSTRACT FROM PUBLISHER]