Search

The spatial correlation of ice-sounding data can be used to trace internal isochronic layers and synchronize the age–depth relationship between different ice core sites, which is difficult using existing imaging methods. In this study, we propose a new algorithm to address the opportunity that applying spatial correlation to ice-sheet imaging offers. The algorithm is a spatial-correlation-based ice-sounding imaging method using fast back projection (FBP) that successfully improves the spatial correlation of imaging results with high efficiency. We give the specific steps to implement the algorithm and apply it to simulate both point targets and ice-sounding radar data to demonstrate its validity in imaging ice sheets. Furthermore, compared with two previous methods, the proposed algorithm improves the spatial correlation without degrading the ability of signal-to-noise ratio (SNR) improvement and processing efficiency. [ABSTRACT FROM AUTHOR]

This article presents detailed geometric analyses of ground clutter in bistatic passive airborne radars. Analytic closed-form solutions are derived for finding the intersection of iso-ranges and iso-velocities. This allows clutter bistatic coordinates to be easily converted to its Cartesian coordinates. Based on those solutions, a theoretical clutter map in the bistatic coordinates can be calculated assuming uniform clutter distribution on the Earth’s surface. This is done by first converting a resolution cell in the bistatic coordinates into a corresponding cell in the Cartesian coordinates. Next, the power distribution in the bistatic coordinates is calculated taking into account range dependency, incident angles, and the radiation patterns of the transmitter and the receiver. The aim of this analysis is to characterize clutter in terms of expected mean power map rather than in terms of statistical distribution. The obtained results provide insights into the expected characteristics of clutter, which can be helpful in designing signal processing algorithms for ground moving target indication (GMTI) and synthetic aperture radar (SAR). The theoretical clutter distribution on the range-velocity map is compared with real-life data acquired with a Digital Video Broadcasting–Terrestrial (DVB-T)-based passive radar and good agreement between theory and measurement is presented. [ABSTRACT FROM AUTHOR]

Microwave photonic synthetic aperture radar (MWP-SAR) offers a larger signal bandwidth than conventional SAR, and its theoretical resolution can be improved to centimeter level. To achieve same order of magnitude resolution in the azimuth direction, long synthetic aperture is always required, which results in extremely high requirements for the accuracy of imaging procedure. Compared with the conventional SAR imaging algorithms, two major problems should be considered: 1) the scattering characteristics of target might vary from the frequency of signal and the angle of incidence, which seriously affects the coherence of received echo and 2) the imaging of the MWP-SAR system is more sensitive to motion errors and therefore requires higher accuracy of motion compensation processing. To solve the above issues, a high-precision imaging method for MWP-SAR is proposed. First, based on the attribute scattering center (ASC) model, this article analyzes the target scattering characteristics with different frequencies and incident angles. Then, according to the influence of scattering phase on MWP-SAR imaging, an optimal subaperture division algorithm is proposed to guarantee the coherence of each subaperture data and better imaging results. Furthermore, to compensate for the effects of high-order motion errors, this article proposes a motion error estimation algorithm based on subimage registration, where the full-aperture high-order motion errors can be divided into multiple linear components, and the flight trajectory of platform can be accurately reconstructed. Finally, a full-aperture time-domain high-precision imaging method is presented, and the effectiveness of the proposed formation is verified by both simulation and actual airborne MWP-SAR data processing. [ABSTRACT FROM AUTHOR]

This article proposes a new synthetic aperture radar (SAR), named as panoramic SAR, based on a combination of linear and rotational SARs, by which a large 360° panoramic view of the observed scene can be reconstructed. First, the system geometry and its imaging process based on the back-projection algorithm (BPA) are presented. The combined movement constitutes a 2-D synthetic aperture, and thus higher imaging resolutions can be obtained. The corresponding resolution analysis and the sampling criteria are discussed accordingly. Then, a novel dynamic piecewise compensation (DPC) algorithm, a recursive imaging process, is proposed to reduce the processing complexity significantly. The imaging implementation and the complexity are also studied respectively. Finally, a prototype of panoramic SAR is built based on an frequency-modulated continuous wave (FMCW) radar and a moving platform, and the simulation and experimental results are provided to validate the proposed panoramic SAR principle and the DPC algorithm. [ABSTRACT FROM AUTHOR]

As a classical sparse reconstruction algorithm, iterative soft thresholding (IST) is often used in SAR sparse imaging applications. However, for moving targets, the radar echo contains an unknown phase error, so it is difficult to directly apply the IST algorithm to reconstruct the SAR moving target image. In this article, a parametric IST (P-IST) algorithm is proposed for refocusing of moving targets in synthetic aperture radar (SAR) images. In this algorithm, the echo phase error is modeled as a function of the phase compensation factor, and in the iteration process, a phase compensation factor optimization selection step based on residual energy minimization is added. Compared with the existing algorithms, the proposed P-IST algorithm can obtain the global optimal solution and has better efficiency and robustness. Both simulated data and measured data are used to validate the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Compressed sensing (CS)-based synthetic aperture radar (SAR) imaging methods are showing superior potential in imaging performance over classical matched filtering-based methods. However, the CS-based methods require much more computational cost to solve the iterative optimization composed of large-scale matrix operators. To hold the improvement of imaging performance and reduce the computational cost, in this article, we propose a novel SAR imaging method by a deep unfolded network (DUN) of an iterative shrinkage threshold algorithm (ISTA) with the approximated observation of a range-Doppler algorithm (RDA) operator. The proposed method takes the radar echoes as the input to learn the imaging procedure. First, the approximated observation is utilized in an SAR imaging model to reduce the size of the DUN. Moreover, we use ISTA as an example to introduce how to establish DUN with approximated observation, in which the detailed structure to handle the complex-valued radar echoes is also designed. Finally, the autoencoder is utilized to calculate the difference of the echoes rather than the imaging results, so that we can train the proposed network by unsupervised learning. The experiments of point targets, surface targets, and real scenes show that the proposed imaging method is superior in terms of imaging performance and computing efficiency. [ABSTRACT FROM AUTHOR]

Airborne multichannel high-resolution radar (HRR)-ground moving target indication (GMTI) is of great significance to wide-area surveillance, traffic monitoring, and target recognition. The Aerospace Information Research Institute, Chinese Academy of Sciences, produced an advanced airborne digital array radar with high resolution and conducted an experiment with slow and weak cooperative moving targets in 2021. In this article, an overall processing framework for target detection, parameter estimation, and target tracking using this system is introduced. For HRR detection, the echo energy of targets is spread into multiple range units, so-called range-spread targets; thus, using detectors designed for pointlike targets will severely degrade the detection performance, especially for slow and weak targets. To address the adaptive detection of such range-spread targets embedded in Gaussian clutter with an unknown covariance matrix, a novel two-step generalized space–time adaptive processing (GSTAP) algorithm is proposed, which offers an enhanced clutter suppression capability compared with natural competitors. Moreover, a tracking method is implemented in the range-Doppler domain to avoid track loss caused by azimuth relocation error and reject discrete false alarms. Both simulation and experimental results are presented to demonstrate the effectiveness of the proposed method and provide a paradigm for further research. [ABSTRACT FROM AUTHOR]

Earth-based repeat-pass synthetic aperture radar (SAR) interferometry (InSAR) is a powerful tool to obtain the high-precision lunar terrain and deformation information, due to the short revisit period as well as the all-weather, long-time, and large-coverage characteristics of radar lunar observation. In this article, the baseline formation mechanism is investigated. Theoretical analyses show that the interferometric baselines mainly come from the lunar libration; however, the lunar libration may also result in a significant change of baselines and further lead to serious geometric decorrelation. To address this problem and ensure the Earth-based repeat-pass InSAR of the Moon, the precise relative motion model between the radar and the lunar target, considering lunar libration, is established, and the subradar point (SRP) wagging phenomenon is analyzed. Then, to evaluate the effects of SRP wagging on InSAR coherence, a geometric decorrelation model based on azimuth angle and incident angle is proposed. Based on that, the spatial–temporal baseline for Earth-based repeat-pass InSAR of the Moon is analyzed based on numerical simulation. Results show that the temporal baseline has obvious periodicity with a cycle of about 27 days. When the temporal baseline is an integral multiple of 27, the spatial baseline usually has the minimum value and the geometric decorrelation effect is relatively slight. Moreover, using the geometric decorrelation criteria, we examine the effects of radar frequency, position, and target location on the quantity of viable interferometric pairs, which has guiding significance for the selection of radar system parameters, radar position, and lunar target area. [ABSTRACT FROM AUTHOR]

For the target with 3-D rotation, the 3-D synthetic aperture radar (SAR) imaging is very important for the feature extraction and classification. To solve this issue, a novel 3-D imaging algorithm through the airborne SAR system with a single antenna is proposed in this article, which has great advantages for the simplification of system structure compared with the traditional interferometric system. The proposed 3-D airborne SAR imaging algorithm can be implemented with three steps: 1) the azimuth signal is modeled as multicomponent linear frequency modulation (LFM) signal due to the relative movement between the target and radar. 2) The scatterer height position can be obtained by estimating the frequency modulation rate (FMR) for the LFM signal. 3) The 3-D airborne SAR image is obtained via the range-Doppler (RD) algorithm. Furthermore, the reconstruction performance under different rotation patterns, including roll, pitch, and yaw, is analyzed. The availability of the presented novel technique is demonstrated by the results of simulated and real experimental data. [ABSTRACT FROM AUTHOR]

Multiple-input–multiple-output synthetic aperture radar (MIMO-SAR) has extensive application prospects, mainly including the acquisition of multidimensional scattering information, high-resolution and wide-width (HRWS) imaging, and moving target indication (MTI). Its echo separation is the most technical challenge, and so far, the confirmation for orthogonal waveform encoding MIMO-SAR by airborne experiments has not been reported in any literature. Here, an echo separation experiment based on the segmented phase code (SPC) waveforms and an airborne digital beamforming SAR (DBF-SAR) system is demonstrated for the first time. In the experiment, the SPC waveforms are cyclically transmitted within the adjacent pulse repetition intervals (PRIs) to simulate multiple transmitters, and the scattered echoes are received by the 16-channel antennas in elevation at the same time. In the postprocessing, the echo signals of continuous PRIs are added to obtain the mixed echoes, and a detailed echo separation method is adopted. In the method, the mixed echo signals from close arrival angles and far arrival angles are separated by the time shift and weighting, and by the bandpass filtering and DBF technique, respectively. Through the presented method, the mixed echoes of dual-transmit and 16-receive (2T16R) SAR imaging mode are separated and imaged successfully. The experimental results not only validate the echo separation scheme but also indicate that it is very promising in future MIMO-SAR missions. [ABSTRACT FROM AUTHOR]

Due to the small size of foreign object debris (FOD) and varied complex weather conditions, the detection of FOD on airport runways is a great challenge. Radar is an important method for detecting FOD targets. However, almost all the existing systems are based on real apertures, which have disadvantages such as low azimuth resolution and susceptibility to rain interference. Here, an innovative FOD detection radar system based on arc-scanning synthetic aperture radar (AS-SAR) technology, the AS-SAR based FOD detection system (AS-FODR), achieves omnidirectional coverage with a very high azimuth resolution and the suppression of flicker clutter, such as rain drops in severe weather. According to the radar imaging simulation of a scene under rainy conditions and the information processing analysis of field experiments, a prototype system was built, and an efficient data process flow was proposed. In short, a one centimeter FOD target was detected on the runway more than 250 m away, proving that the use of AS-FODR is feasible and effective. [ABSTRACT FROM AUTHOR]

An intrinsic challenge in the geophysical interpretation of low-frequency synthetic aperture radar (SAR) imagery of semitransparent media, such as ice sheets, is the position ambiguity of the scattering structures within the glacial volume. Commonly tackled by applying interferometric and tomographic techniques, their spaceborne implementation exhibits by orders higher complexity compared to missions relying on single SAR images, making them cost expensive or, in the context of planetary missions, even impossible due to limited navigation capability. Besides, even these sophisticated techniques are commonly biased due to inaccurate permittivity estimates, leading to geometric distortions up to several meters. We present a novel inversion procedure to estimate volume parameters of ice sheets, namely, the depth of the scattering layer within the glacial volume and the dielectric permittivity of the ice, based on single-image single-polarization SAR acquisitions. The information is inherent in the processed SAR data as phase errors on the azimuth signals resulting from uncompensated nonlinear propagation of the radar echoes through ice. We suggest a local map-drift autofocus approach to quantify and spatially resolve the phase errors and an inversion model to relate them to the penetration depth and permittivity. Testing the proposed technique using P-band SAR data acquired using DLR’s airborne sensor F-SAR during the ARCTIC15 campaign in Greenland shows promising results and good agreement with tomographic products of the analyzed test site. [ABSTRACT FROM AUTHOR]

Radio spectrum bands allocated to spaceborne synthetic aperture radar (SAR) imagery are shared by multiple missions. In practical radio spectrum environments, these bands are also used by some ground radars, e.g., C-band weather radar. Due to this fact, radio frequency interference (RFI) may occur for a spaceborne SAR when its received signals contain the transmitted waveforms from another SAR or radar operating at the same frequency band. This particular class of RFI is usually linear-frequency-modulation (LFM) signals, which can cause bright radiometric artifacts in focused SAR images. Most existing signal processing approaches designed for addressing this problem belong to the class of preprocessing methods, which removes RFI in level-0 raw radar data before SAR focusing. In this article, we propose a postprocessing kernel—2-D SPECtral ANalysis (2-D SPECAN) filter, for removing the class of LFM RFI in level-1 SLC images. The filtering consists of three main steps: Step 1: focus LFM RFI artifacts in SLC images as point-like responses in the spectral domain via 2-D SPECAN; Step 2: perform 2-D notch filtering in the spectral domain to remove the most contribution of the RFI responses; and Step 3: transform the filtered spectrum back into the SLC image domain using the inverse operation of the 2-D SPECAN. For computation efficiency, we design a simplified processing flow and adopt a blockwise processing strategy. Experiments with several Sentinel-1 SLC images demonstrate that severe RFI artifacts in SLC images can be removed significantly by the proposed method. [ABSTRACT FROM AUTHOR]

High-resolution wide-swath synthetic aperture radar (HRWS-SAR) imaging is highly desirable since it allows one to produce high-resolution SAR images of large areas during a short visit time. In this article, staggered coprime pulse repetition frequencies synthetic aperture radar (SCopSAR) is proposed. It divides the time during which a scatterer is illuminated by the antenna beam pattern into two halves where, in each half, pulses are transmitted at the rate of one of two sub-Nyquist pulse repetition frequencies (PRFs). Such PRFs are related to the Nyquist PRF using two coprime subsampling factors. This allows extending the maximum range swath width that can be imaged by a number of times that equals the smaller subsampling factor at the expense of a reduction in the azimuth resolution by half. It further allows for a reduction in the amount of data to be stored and communicated. SCopSAR is an imaging modality suitable for scenes that contain a small number of bright scatterers over a dark background which, for instance, is the case when imaging ships in a calm sea background. Compared with the techniques recently proposed in the literature, SCopSAR simplifies the radar requirements since it uses only one carrier frequency, one waveform, and one channel. Simulations and real ERS-2 satellite raw data are used to validate the theoretical findings presented in this article. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) human-imaging technology has been widely used in the fields of security screening and activity recognition. However, most of the existing methods aim at stationary human targets, resulting in severe restrictions on their potential applications. In this article, an SAR imaging method for walking human is proposed with short aperture terahertz (THz) radar. This method is based on a modified wavenumber domain approximate algorithm ($\text{m}{\omega }$ ka), whose interpolation mapping is modified according to the approximation of region of interest (RoI). Because the nonrigid motion phase error caused by the walking human would lead to severe deformation and blur in imaging results, a compensation processing is essential. To figure it out, the fractional Fourier transform combined with the maximum and minimum generalized likelihood ratio test (FrFT-mmGLRT) is devised in this article. Within a short aperture time, the nonrigid motion of walking human can be approximately assumed as a superposition of the rigid movements of different human body parts. Particularly, by taking advantage of the superposition property of FrFT, the motion phase errors of different human body parts are distinguished and estimated by jointly searching for the peaks of FrFT energy spectrum. Furthermore, the mmGLRT-based composite imaging technique is utilized to obtain a whole body result from the compensated results of different body parts. Finally, numerical simulation and real experiments are conducted to verify the feasibility and capability of the proposed method for walking human SAR imaging. [ABSTRACT FROM AUTHOR]

This article develops and examines methods for the production of real-world, very high-resolution imagery using a high-frequency drone-borne synthetic aperture radar (SAR) operating at short ranges. The significance of motion errors which lead to space-invariant/variant phase errors is discussed. Subsequently, an imaging algorithm capable of handling these errors is proposed and presented. The validity of the approach is tested through both simulation and experiment. We present novel short-range, fine-resolution imagery (less than 2 cm in cross-range) of an extended target area generated using a low-cost, drone-borne vehicular frequency-modulated continuous-wave (FMCW) radar operating at 77 GHz, without using a dedicated inertial navigation system (INS) or Global Positioning System (GPS). [ABSTRACT FROM AUTHOR]

This article presents an universal circular synthetic aperture radar (SAR) (UCSAR) by which the targets to be observed at any radial distance can be imaged, thus making SAR imaging possible in a more general scenario with a circular movement of the radar platform. The UCSAR point spread function (PSF) is firstly analyzed based on the time-domain correlation imaging approach, and thus a three-dimension (3-D) spatial variant PSF of the target can be formulated. The closed-form PSF expressions with single-frequency and frequency-modulated continuous wave (FMCW) transmitted signals are derived respectively to quantify the imaging resolutions, showing that the PSF is a product of a sinc function and a zeroth-order Bessel function when using a wideband FMCW signal. Secondly, a fast UCSAR imaging algorithm and its further simplified version are proposed to reduce the computational cost significantly based on the piecewise constant Doppler (PCD) principle. To quantify the imaging performance, we derive an error function of the slant range approximation for the proposed algorithm, serving as a practical guideline for the UCSAR parameter selection. Finally, the simulation and experimental results are provided to validate the PSF analysis, the fast imaging algorithm, and the implementation of the proposed UCSAR. [ABSTRACT FROM AUTHOR]

The compressed sensing (CS)-based synthetic aperture radar (SAR) imaging methods have emerged as the standard approach to obtain super-resolution (SR) SAR images and achieve extraordinary performances. However, they face three challenges. First, this kind of method is mainly based on the point scattering model and not suitable for characterizing the line-segment-scattering and surface-scattering features of distributed targets. Second, the hyperparameters in these methods are hard to tune to optimal values. Third, due to a large amount of calculation, these methods are difficult to apply in practice. In this article, to solve these problems, we introduce the line-segment-scatterers (LSSs) and rectangular-plate-scatterers (RPSs) in SAR echo model to develop the SAR hybrid echo model and propose two SAR parametric SR image reconstruction methods based on solving a CS problem, where three penalties are utilized to exploit the sparsity of the point scatterers, LSSs, and RPSs, respectively. At the core of the first method is a direct solver called multicomponent alternating direction method of multipliers (MC-ADMM) solver that solves the CS problem quickly and iteratively based on closed derivative expressions. In contrast, the second method maps the MC-ADMM solver into a deep unfolded neural network, i.e., the parametric SR imaging network (PSRI-Net), which is faster, and the parameters can be automatically set to the optimum. Since all the parameters of the MC-ADMM solver are learned discriminatively through end-to-end training in PSRI-Net. Extensive simulation and practical experiments are carried out to demonstrate the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

Spaceborne multistatic synthetic aperture radar (M-SAR) has extensive applications, including multiangle imaging, digital beamforming (DBF) and cross- and along-track interferometry. However, it is difficult for classical satellite formations to meet the multimission (e.g., cross-track interferometry and along-track interferometry, i.e., XTI and ATI) requirements of M-SAR concurrently. Therefore, superpolyhedron (SP), an innovative satellite formation based on the dual-helix and pendulum formations, is proposed to maximize the coverage ratio of the effective cross- and along-track interferometric baselines at the same time. A method of constructing the SP formation is detailed. The method is a three-step procedure, in which the first two steps aim at obtaining an initial formation via exploiting the geometry of the formation dynamics; the last step solves an optimization problem. Then, the design of a supertetrahedron (ST) formation, a special case of the SP formation, is investigated as a numerical example. The merit of SP formation is represented as the coverage ratios of effective cross- and along-track interferometric baselines. The result is compared with those of the classical satellite formations. It shows that only the coverage ratios of the ST formation are greater than 70% simultaneously. Therefore, the ST formation can realize both effective XTI and ATI. It implies that the SP formation has the potential to be used in future spaceborne M-SAR interferometry. [ABSTRACT FROM AUTHOR]

Ground-based synthetic aperture radar (GBSAR) systems are widely used for monitoring slopes, especially in quarries and open pits. Unfortunately, the movement of the machinery (cranes, trucks, shovels, and excavators) in the radar field of view often prevents to correctly focus large circular sections of the radar images, producing a characteristic artifact, often named “blurring.” Therefore, the aim of this article is to propose both an acquisition modality and an image processing technique able to mitigate the blurring due to moving clutter. The proposed acquisition modality (named “free-running” or “on-the-fly”) allows to filter out the high-frequency clutter, which is often noticeable in GBSAR images, but it is not effective with low-frequency clutter caused by slow movement of machinery like heavy trucks or large cranes. For this reason, the authors propose even a suitable processing method that can be used in combination with high-frequency sampling. The application of these two methods has been proved to be very effective in realistic quarry scenario. [ABSTRACT FROM AUTHOR]

Forward-looking multichannel synthetic aperture radar (FLMC-SAR) is an important tool for modern remote sensing applications, which has the capability to reconstruct the high-resolution image of the front area. However, due to the azimuth-variant characteristics of the motion errors over a long aperture, FLMC-SAR data processing is usually a challenging task, especially when involving the motion compensation (MOCO) coupled with Doppler ambiguity resolving. To accomplish an accurate MOCO for FLMC-SAR, a novel parametric azimuth-variant MOCO approach is proposed in this article. Aiming at the coupling problem of MOCO and Doppler ambiguity resolving over the full aperture, we can decouple them through the subaperture division. As a full synthetic aperture is decomposed into several subapertures, the high-order motion errors of the full aperture can be decomposed into the first-order motion errors of the subaperture. On this basis, the mismatch of the space–time spectrum caused by the motion errors can be solved by spectral estimation, yielding Doppler ambiguity resolving for each subaperture. Meanwhile, the azimuth-variant characteristic of motion errors in FLMC-SAR system is characterized by a parametric angle-dependent quadratic phase error (QPE) model. The motion parameters are estimated by a joint multichannel angle estimation-based signal quadratic decomposition method. Immediately, the MOCO for ambiguous targets with different motion errors can be processed separately to improve the imaging performance. Experimental results based on both simulated and real data demonstrate that the proposed method is suitable for FLMC-SAR system. [ABSTRACT FROM AUTHOR]

Forward-looking correlated imaging plays an increasingly important role in modern radar imaging systems. It overcomes disadvantages of traditional side or squint synthetic aperture radar (SAR) which is dependent on specific relative motion between the radar and target scene. A new microwave forward-looking correlated 3-D imaging method based on random radiation field combined with sparse reconstruction is proposed in this article. Firstly, phased array radar (PAR) is adopted to form different and random antenna patterns. Then, combined with the compressed sensing (CS) theory, the target image can be recovered with very few samples which can break through Rayleigh resolution limitation. Furthermore, the proposed method can achieve resolution at least 5.5 times higher than real aperture imaging. To raise computation efficiency of sparse reconstruction, an improved quasi-Newton iteration method based on graphics processing unit (GPU) platform is developed. Meanwhile, a GPU-based (NVIDIA Tesla K40c) accelerated computing method can significantly reduce the processing time compared with the time given by a personal computer (PC). Both simulation and field experiment verify the validity of the proposed method. [ABSTRACT FROM AUTHOR]

Most existing super-resolution imaging methods fail to work in low signal-to-noise ratio (SNR) condition due to the ill-posed antenna measurement matrix, but the sparse-truncated singular value decomposition (TSVD) method can effectively suppress noise and improve azimuth resolution in low SNR condition. However, the current sparse-TSVD method encounters large computation cost, resulting in a slow algorithm speed. In this work, a fast sparse-TSVD super-resolution imaging method of real aperture radar is proposed. First, the proposed method is based on the results of TSVD, using the truncated unitary matrix and diagonal matrix to reconstruct the signal convolution model. The dimension of the reconstructed antenna measurement matrix reduces from $N \times N$ to $k \times N$ , and the dimension of the reconstructed echo matrix reduces from $N \times 1$ to $k \times 1$ , where $N$ is azimuth sampling points and $k$ is truncation parameter, $N \gg k$. Much of the expensive matrix– multiplication computation can then be performed on the smaller matrices, thereby accelerating the algorithm. Second, an objective function is established as the ${l_{1}}$ constraint based on the regularization strategy. Lastly, this article employs iterative reweighted least square (IRLS) method to solve the objective function, and the dimension of the reversed matrix is lessened from $N \times N$ to $k \times k$ , speeding up the algorithm further. The simulation and real data verify that the proposed algorithm not only improves the azimuth resolution in low SNR condition but also increases computational efficiency compared with the sparse-TSVD method. [ABSTRACT FROM AUTHOR]

In the context of spaceborne synthetic aperture radar (SAR) imaging, high resolution and wide swath are inherently conflicting requirements. These may, however, be simultaneously satisfied by advanced imaging modes with multichannel architectures in elevation and/or azimuth. This article elaborates on a new mode based on multiple elevation beams and a simple pulse repetition interval (PRI) variation scheme which allows high-resolution wide-swath imaging. It is shown to use the illumination time more efficiently than ScanSAR and yet to be simpler than staggered SAR. Good SAR imaging performance is achieved with a rather compact antenna design. The proposed imaging mode is suitable for spaceborne SAR systems with planar and reflector antennas. In order to improve the imaging performance, a reflector antenna architecture with a multichannel feed in both elevation and azimuth is considered. [ABSTRACT FROM AUTHOR]

Forward-looking imaging and target detection are highly desirable in many military and civilian fields, such as search and rescue, sea surface surveillance, airport surveillance, and guidance. However, there is a blind zone of forward-looking imaging for conventional Doppler beam sharpening and synthetic aperture radar. Scanning radar can be utilized to obtain a real beam image of a forward-looking area and implement target detection, while its azimuth resolution is poor due to the limitation of antenna size. Besides, during the processing procedure, imaging and target detection are usually regarded as two independent parts, which means that the imaging result will directly affect the detection performance. In this article, an integrated algorithm of super-resolution imaging and target detection for forward-looking scanning radar is proposed. In this algorithm, first of all, low-rank and sparse constraints as regularization norms are incorporated into the forward-looking scanning radar imaging and the objective function is established. Subsequently, the convex theory is utilized to solve the objective function and transform the problem of simultaneous super-resolution imaging and target detection into an optimization problem. Lastly, the super-resolution imaging and the target detection results are obtained simultaneously by solving the optimization problem using the alternating direction method of multipliers. In addition, simulation and experiment results are given to verify the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Real-aperture radar can be utilized to realize forward-looking imaging by antenna scanning the imaging region. However, low azimuth resolution seriously affects its practical application. Although traditional super-resolution methods could enhance azimuth resolution to a certain extent, effective preservation of contour information for important targets still remains to be a problem. In this article, a method of total variation-sparse (TV-sparse) multiconstraint deconvolution is proposed to improve azimuth resolution of forward-looking imaging as well as preserve contour information of important targets. Since our interested targets usually appear to be sparse, the sparse constraint of the target is introduced first to achieve high resolution of forward-looking images, which may cause the loss of target contour information in the meantime. Second, total variation (TV) constraint is introduced based on the sparse constraint, converting traditional single-constraint super-resolution problem to a multiconstraint problem. We then use the split Bregman algorithm (SBA) to solve the multiconstraint problem, whose solution is the super-resolution image of radar forward-looking region. Compared with traditional super-resolution methods, the proposed method can improve the azimuth resolution of radar forward-looking imaging as well as better restore target contour information by adjusting respective weights of sparse constraint and TV constraint. Finally, the performance of the proposed method is validated with the simulation and measured data. [ABSTRACT FROM AUTHOR]

A W-band multiple-input multiple-output (MIMO) radar imaging system has been proposed. The $4 \times 4$ radar system that forms a 2-D virtual array operates at a center frequency of 94 GHz and bandwidth of 1 GHz with frequency-modulated continuous wave. A hybrid scheme comprising time- and frequency-division multiplexing is introduced for establishing orthogonal waveforms, where the transmit channels perform alternate transmission in pairs. The proposed scheme can efficiently extend the number of MIMO channels utilizing the existing hardware with simultaneous transmission. The design, implementation, measurements, and imaging results of the proposed radar system have been presented. The imaging performance was tested through outdoor experiments. The high-resolution performance was shown with images generated using a synthetic aperture radar. The impulse responses of all channels were measured, and the resolution was confirmed to be 0.15 m in all the channels. In addition, a human and a car at 100-m range were imaged using the proposed radar system. The polarimetric and interferometric capabilities were tested for multimode imaging with the MIMO configuration. Overall, the measurements and experimental results verified the feasibility of the proposed MIMO radar with hybrid scheme as a high-resolution multimode imaging system. [ABSTRACT FROM AUTHOR]

This article presents the results of a laboratory investigation to explain anomalously high soil moisture estimates observed in retrievals from SAR and scatterometer backscatter, affecting extensive areas of the world associated with arid climates. High-resolution C-band tomographic profiling was applied in experiments to understand the mechanisms underlying these anomalous retrievals. The imagery captured unique high-resolution profiles of the variations in the vertical backscattering patterns through a sandy soil with moisture change. The relative strengths of the surface and subsurface returns were dependent upon both soil moisture and soil structure, incidence-angle, and polarization. Copolarized returns could be dominated by both surface and subsurface returns at times, whereas crosspolarized returns were strongly associated with subsurface features. The work confirms suspicions that anomalous moisture estimates can arise from the presence of subsurface features. Diversity in polarization and incidence angle may provide sufficient diagnostics to flag and correct these erroneous estimates, allowing their incorporation into global soil moisture products. [ABSTRACT FROM AUTHOR]

In this paper, we discuss the application of polarimetric target decomposition (TD) theorems to circular synthetic aperture radar (CSAR) images to retrieve the polarimetric azimuthal angular characteristics of the targets. In CSAR systems, radar-carrying aircraft moves along a circular path. The antenna beam is pointed toward the center of the circular path during the data acquisition to irradiate the spotlighted area from various azimuthal or aspect angles. Therefore, the resultant polarimetric CSAR images contain information about the polarimetric scattering mechanisms of the targets at each aspect angles. To recover this information, we propose the use of spectral decomposition of CSAR images in combination with several TD algorithms. The spectral domain CSAR images can be viewed as the azimuthal angular spectrum images. Thus, the application of TD algorithms to the spectral domain images is expected to be able to obtain the angular dependence and polarimetric scattering properties of the targets simultaneously. We carried out a simple numerical simulation and an indoor laboratory experiment to validate the proposed TD scheme. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) is an advanced imaging sensor that can image side-looking terrain. Until now, SAR schemes and imaging theories have been researched for stationary scenes. Unlike a stationary scene, due to unknown motion parameters, a ground moving target (GMT) is shifted and defocused in a background image, which causes difficulties in their use for further applications. This paper proposes a multiple pulse repetition frequency (PRF) airborne SAR scheme for background-free GMT imaging. In the proposed scheme, pulses are transmitted by a nonuniform pulse repetition time, and echoes are divided into groups with different PRFs. For spectra with different PRFs, due to their diverse respective spectra extending periods, periodical extending GMT spectra will not appear at the same location except for the original spectra. A theorem is proposed to prove that the spectra can be extracted intact, undistorted, and unpolluted. In light of the divergence of the GMT spectra location from that of the clutter, filter banks are designed to locate, extract, and reconstruct the GMT spectra out of the mixed spectra that contain the GMT and clutter. For GMT SAR imaging, a moving target is regarded as a steady target under an equivalent geometry with a new equivalent squint angle and a new SAR platform velocity. The SAR image is obtained with the range-Doppler algorithm with equivalent geometry parameters that are estimated from the Doppler parameters. Experimental results obtained from using extensive numerical simulated data validate our proposed approach. [ABSTRACT FROM AUTHOR]

State-of-the-art and future spaceborne synthetic aperture radar (SAR) systems increasingly often face the requirement of providing high-resolution images with reduced revisit times, requiring coverage of wide swaths. Since these are contradicting drivers in terms of system design, different alternatives for high-resolution wide-swath SAR imaging have been investigated, relying on digital beamforming and the use of multiple receiver channels, both in elevation and azimuth dimensions. In this context, staggered SAR, which operates with a pulse repetition frequency (PRF) variation, using a single channel in azimuth proves itself as a promising alternative for covering wide continuous swaths with moderate azimuth resolution, whereas the use of multiple azimuth receiver channels bears the potential of improving the azimuth resolution over a given swath, but has yet only been applied to systems with a fixed PRF. This paper introduces and analyzes in detail processing techniques suitable for the combination of these techniques, leading to novel multichannel staggered SAR imaging modes with the potential for very fine azimuth resolution over ultra-wide swaths. A system concept with 2-m azimuth resolution over a 400-km swath in quad-pol is provided as an example. [ABSTRACT FROM AUTHOR]

This paper presents the first experimental demonstration of the virtual bandwidth synthetic aperture radar (VB-SAR) imaging scheme. VB-SAR is a newly developed subsurface imaging technique which, in stark contrast to traditional close proximity ground penetrating radar schemes, promises imaging from remote standoff platforms such as aircraft and satellites. It specifically exploits the differential interferometric SAR (DInSAR) phase history of a radar wave within a drying soil volume to generate high-resolution vertical maps of the scattering through the soil volume. For this study, a stack of C-band vertically polarized DInSAR images of a sandy soil containing a buried target was collected in the laboratory while the soil moisture was varied--first during controlled water addition, and then during subsequent drying. The wetting image set established the moisture-phase relationship for the soil, which was then applied to the drying DInSAR image set using the VB-SAR scheme. This allowed retrieval of high-resolution VB-SAR imagery with a vertical discrimination of 0.04 m from a stack of 1-m vertical resolution DInSAR images. This paper unequivocally shows that the basic principles of the VB-SAR technique are valid and opens the door to further investigation of this promising technique. [ABSTRACT FROM AUTHOR]

Radiometric correction of radar images is essential to produce accurate estimates of biophysical parameters related to forest structure and biomass. We present a new algorithm to correct radiometry for 1) terrain topography and 2) variations of canopy reflectivity with viewing and tree-terrain geometry. This algorithm is applicable to radar images spanning a wide range of incidence angles over terrain with significant topography and can also take into account aircraft attitude, antenna steering angle, and target geometry. The approach includes elements of both homomorphic and heteromorphic terrain corrections to correct for topographic effects and is followed by an additional radiometric correction to compensate for variations of canopy reflectivity with viewing and tree-terrain geometry. The latter correction is based on lookup tables and enables derivation of biophysical parameters irrespective of viewing geometry and terrain topography. We evaluate the performance of the new algorithm with airborne radar data and show that it performs better than classical homomorphic methods followed by cosine-based corrections. [ABSTRACT FROM PUBLISHER]

A high-resolution 3-D hydrodynamic model capable of simulating far wakes of ships has been implemented using computational fluid dynamics software. We feed the surface velocity field produced by the hydrodynamic model into a numerical radar imaging model to simulate synthetic aperture radar (SAR) signatures of the wake. Potential capabilities of this modeling method are demonstrated for an example of wind stress effects on the centerline (turbulent) ship wake. The numerical simulations show that an interaction of the wind-induced surface current with circulations in the ship wake results in a convergence zone on the upwind side of the centerline wake and a divergence zone on the downwind side. In the simulated radar image, the convergence zone appears to be bright because of enhanced surface roughness and radar backscattering. The divergence zone looks dark due to an attenuation of short gravity capillary waves and a corresponding reduction of the backscattered power. This combined hydrodynamic and radar imaging model predicts an asymmetry of the centerline wake with respect to the wind direction, which is consistent with observed ship wake signatures in high-resolution satellite SAR images. The approach developed in this work could be also useful for simulations of other natural and artificial fine-scale features on the sea surface (sharp frontal interfaces, freshwater plumes, etc.) and their interpretation in high-resolution SAR imagery. [ABSTRACT FROM AUTHOR]

This paper analyzes the multiangle imaging results for bistatic synthetic aperture radar (BSAR) based on global navigation satellite systems (GNSS-BSAR). Due to the shortcoming of GNSS-BSAR images, a multiangle observation and data processing strategy based on BeiDou-2 navigation satellites was put forward to improve the quality of images and the value of system application. Twenty-six BSAR experiments were conducted and analyzed in different configurations. Furthermore, a region-based fusion algorithm using region-of-interest (ROI) segmentation was proposed to generate a high-quality fusion image. Based on the fusion image, typical targets such as water area, vegetation area, and artificial targets were compared and interpreted among single/multiple-angle images. The results reveal that the multiangle imaging method was a good technique to enhance image information, which might extend the applications of GNSS-BSAR. [ABSTRACT FROM PUBLISHER]

This paper presents a generalized treatment of image formation for a linear-frequency-modulated continuous wave (LFM-CW) synthetic aperture radar (SAR) signal, which is a key technology in making very small SAR systems viable. The signal model is derived, which includes the continuous platform motion. The effect of this motion on the SAR signal is discussed, and an efficient compensation method is developed. Processing algorithms are developed including precise and approximate backprojection methods and a generalized frequency scaling algorithm that accounts for an arbitrary number of terms of a Taylor expansion approximation of the SAR signal in the Doppler frequency domain. Together, these algorithms allow for the processing of LFM-CW SAR data for a wide variety of system parameters, even in scenarios where traditional algorithms and signal approximations break down. [ABSTRACT FROM PUBLISHER]

Tomographic profiling (TP) is a new imaging technique designed to provide vertical backscatter profiles through biophysical and geophysical target volumes, such as snow, ice, vegetation, and forest canopies. Data is collected as for normal synthetic aperture radar (SAR) imaging, but with the antennas aligned along the scan or along-track direction. The real antenna provides a wide beam in the along-track direction, which is sharpened by the addition of elemental measurements across a subaperture using a SAR-like processing scheme. A novelty of the scheme is the ability to produce an image transect in which the incidence angle is constant at every point. This is accomplished by incrementally sliding the subaperture across the full aperture, and utilizing the appropriate subaperture to provide the necessary viewing geometry at each pixel. This is in contrast to the SAR case, in which the angle of incidence varies across a scene. By suitable phasing between the subaperture elements, the synthesized beam can be steered in angle within the wide angular extent of the real beam, allowing post-measurement retrieval of the backscattering properties of the scene over a continuous range of incidence angles from a single scan. In the across-track direction, a narrow real beam is required to maintain good vertical resolution and limit the size of the horizontal footprint. Example TP experimental fieldwork results are provided for a 42-cm-deep snowpack, collected with a ground-based SAR system. Although the scheme was developed for ground-based applications, its application to the airborne and satellite cases is also discussed. [ABSTRACT FROM AUTHOR]

The accurate estimation of internal solitary waves' (ISWs') amplitudes from radar images is important for understanding the ISW evolution, energy dissipation, and mixing processes. The in situ data from the Non-Linear Internal Wave Initiative experiment in the Mid-Atlantic Bight show many ISWs with amplitudes of 10 m or more in a shallow water depth of 80 m or less. Therefore, the higher order Korteweg–de Vries (KdV) equation in a two-layer system is needed to describe these large-amplitude ISWs instead of the classic KdV equation. Based on a simple theoretical radar imaging model, we develop a method to estimate large ISW amplitudes from distances between the positive and negative peaks of ISW signatures in radar images and a selection rule from the two possible amplitude solutions. Two groups of ISWs with large amplitudes, determined from the temperature records from nearby moorings, are observed in a RADARSAT synthetic-aperture-radar image and in marine X-band radar data collected during the experiment. We validate the method using the ISW signatures taken from these two cases. We find the estimated amplitudes to agree well with those determined from the moorings. The proposed method provides a relatively simple and accurate way to estimate large ISW amplitudes from radar images. [ABSTRACT FROM AUTHOR]

This paper proposes a new method for the classification of synthetic aperture radar (SAR) images based on a novel feature vector. The method aims at combining the intensity information of pixels with spatial information and structural relationships. Unlike classical approaches which define a static neighborhood via a rectangular moving window of predefined size and relate spatial information for each center pixel to all the pixels within that window, the local primitives (LPs) proposed in this study provide us with an adaptive neighborhood so that spatial information for each center pixel is extracted only from the related pixels in its neighborhood. LPs correspond to local homogeneous connected components that describe the pixel neighborhood more consistently than the fixed size window approach. A feature vector, called as the LP pattern (LPP), is constructed for each pixel. The feature vector includes information about the sizes, intensity levels, and contrast differences of LPs within a disk whose center is the pixel under consideration as well as the repetitive frequency of LPs outside that disk. Finally, a kernel-based support vector machine is used with the proposed feature vectors for the classification of SAR images. Experimental analysis presents that the new feature extraction technique is well suited to depict spatial information and structural relationships and it yields promising results for the classification of SAR images when compared to common features such as gray-level co-occurrence matrix and Gabor coefficients. [ABSTRACT FROM PUBLISHER]

We develop and then demonstrate a 3-D tomographic ice sounding method applied to very high frequency (VHF) radar data that produces swath measurements of ice sheet surface topography, ice thickness, and radar reflectivity of both the surface and bed of the ice sheet. First, we formulate the ice sheet imaging problem as a problem of estimating signal arrival angles and illustrate how the method resolves ambiguous echoes arriving simultaneously from the left and right sides of the aircraft, as well as from the surface and base of the ice sheet. We then discuss why we chose the time-domain subaperture method for 2-D image formation for ice sounding. We apply the tomographic technique to the data that we collected in May 2006 and again in July 2008 from a multiple-phase-center VHF radar system. We present 3-D images of the upper and lower surfaces of the ice sheet and compare the estimated surface topography with Ice, Cloud, and land Elevation Satellite altimeter nadir track measurements and the measured swath ice thickness with independent nadir depth sounder tracks. We achieved a 5-m surface topography accuracy and a 14-m ice thickness accuracy. [ABSTRACT FROM AUTHOR]

The most intuitive way to extract depth information from remote sensing images is stereogrammetry, in which a digital elevation model (DEM) is achieved by computing stereoscopic radar images. When only the amplitude of the radar images is considered, this computation is called radargrammetry. The main idea of which is to match stereopair radar images in order to create a disparity map from one image to the other and, finally, to compute the elevation. Therein, we present our studies on the extraction of 3-D information from radar images. We examine a way to produce a DEM of a challenging area of the French Alps. The central issue of this paper concerns improvements for radargrammetric synthetic aperture radar image processing for high-relief reconstruction, and we focus on the matching step, which is one of the most important points of the radargrammetric processing. Thus, we propose original methods using different correlation windows. On the one hand, we take the advantages of a multiwindow approach to combine relevant information by multiplying the correlation surfaces obtained for each correlation window size during the matching operation. On the other hand, the second improvement is based on the expansion of windows on foreshortened areas, particularly because of the side-looking radar view. These methods allow us to achieve reliable image matching and to improve the accuracy of the DEM. [ABSTRACT FROM AUTHOR]

Conventional inverse synthetic aperture radar image is a 2-D range-Doppler projection of a target and does not provide 3-D information. Its formation also requires complex motion compensation when the target is uncooperative and maneuvering. On the other hand, multiple-input and multiple-output (MIMO) radar, in addition to having a wide virtual aperture and high cross-range resolution, could also obtain a target's 3-D image in one snapshot and thus have avoided the complex motion compensation needed. In this paper, we propose a 3-D imaging algorithm using three MIMO configurations. The signal model is derived based on a modified zero correlation zone code. A strong scatterer selection criterion is also proposed for the construction of the target profile. [ABSTRACT FROM PUBLISHER]

In this paper, a model for radar images of fractal (topologically 1-D) profiles is introduced. A twofold approach is followed: on one hand, we analytically solve the problem whenever small-slope profiles are in order; on the other hand, we present a partly analytical and partly numerical setup to cope with the general-slope case. By means of the analytical approach, we evaluate in closed form both the structure function and the power density spectrum of the radar signal. An appropriately smoothed (physical) fractional Brownian model (fBm) process is employed; its introduction is justified by the finite sensor resolution. A fractal scattering model is employed. It is shown that for a fractal profile modeled as an fBm stochastic process, the backscattered signal turns out to be strictly related to the associated fractional Gaussian noise process if a small-slope regime for the observed profile can be assumed. In the analytical--numerical framework, a profile with prescribed fractal parameters is first synthesized; then, fractal scattering methods (applicable to wider slope regimes with respect to the previous case) are employed to compute the signal backscattered toward the sensor. Finally, the power density spectrum of the acquired radar image is estimated. The obtained spectra are favorably compared with the theoretical results, and a parametric study is performed to assess the overall method behavior. [ABSTRACT FROM AUTHOR]

A high-frequency asymptotic technique based on the Uniform Geometric Theory of Diffraction (UTD) is employed for building interior imaging. The analysis is implemented using a ray-tracing technique to account for multiple scattering interactions in a building, along with a set of heuristic diffraction coefficients for dielectric wedges and corners. Imaging of the synthetic aperture radar data is carried out by the conventional fast Fourier transform method to transform to the downrange domain, and combined with a coherent near-zone imaging function for cross-range. Comparisons with experimental data for a scaled-down building model are given to demonstrate the suitability and efficacy of our analysis for through-wall building imaging. The UTD ray mechanisms account for the dominant scattering features observed in the image. [ABSTRACT FROM AUTHOR]