Search

This paper presents a broadband, simple, re-useable and low-cost approach for noninvasive sweat monitoring using a passive microwave circuit and a cellulose filter paper as a superstrate. The proposed sensor is composed of filter paper with the ability to absorb the sample liquid under test (LUT) placed on top of a coplanar waveguide (CPW) transmission line. Various samples of sodium chloride (NaCl) solutions with concentrations in the range of 0.01-2 mol/L and models of artificial sweat are used to test the proposed sensor. The difference in transmission coefficient (S21) between dry and wet states is used to determine the concentrations of tested solutions in the band of 1-6 GHz. The sensor detects concentrations as low as 0.01 mol/L (0.58 g/L) and quantities as low as 137 μL with a maximum sensitivity of 46.7 dB/g/L. The proposed sensor presents a simple approach to sample and characterize liquids with enhanced sensitivity and consistent performance using microwave signals.

Insulated tubular busbar is a new type of current-carrying equipment with excellent performance. However, the research on this equipment is insufficient because of the short application and the lack of technical digestion, which has resulted in many accidents. In this paper, the full-scale model of epoxy-impregnated-paper insulated tubular busbar with bubble defects was designed and produced, its electrical breakdown process was investigated by withstand voltage test. In the experiment, the failure mode of breakdown caused by gas expansion was found for the first time. The research showed that the electrical-mechanical breakdown process could be divided into two stages: gas increase stage and breakdown threshold stage. The research also obtained the characteristics and the change criterions of the two stages. The gas in the bubble defects generated from epoxy decomposition which caused by partial discharge. When the gas pressure exceeds the critical fracture toughness of the bubble defects wall, the unstable crack extension occurs, therefore, improving the ability about resistance to partial discharge of epoxy resin or improving the fracture toughness of epoxy resin by modifying would enhance the breakdown performance of insulated tubular busbar. The result also has reference significance for other epoxy-impregnated-paper insulated electrical equipment.

This paper presents the design and analysis of a paper-based chipless RFID sensor for wetness content measurement in plant leaves. The sensor is designed using a passive microwave resonator to measure the ambient physical parameter. The resonator is designed with a rectangular loop inductively coupled with an interdigital capacitor. The experimental analysis of the designed sensor is illustrated here to prove its efficacy. The resonator provides adequate backscattered signal for wireless measurement in the microwave frequency band. When interrogated with a couple of UWB antennas and a VNA, it yields accurate leaf wetness response of the plant. The commercial competence of this sensing device is validated through its experimental analysis on three different types of leaf samples. This sensor is suitable for plant health monitoring in any small-scale gardening applications such as nurseries and greenhouses.

This paper investigates the impact of institutes and papers over time based on the heterogeneous institution-citation network. A new model, IPRank, is introduced to measure the impact of institution and paper simultaneously. This model utilises the heterogeneous structural measure method to unveil the impact of institution and paper, reflecting the effects of citation, institution, and structural measure. To evaluate the performance, the model first constructs a heterogeneous institution-citation network based on the American Physical Society (APS) dataset. Subsequently, PageRank is used to quantify the impact of institution and paper. Finally, impacts of same institution are merged, and the ranking of institutions and papers is calculated. Experimental results show that the IPRank model better identifies universities that host Nobel Prize laureates, demonstrating that the proposed technique well reflects impactful research. Refereed/Peer-reviewed

In forensic document analysis, the authenticity of a document must be properly checked in the context of suspected forgery. Hyperspectral Imaging (HSI) is a non-invasive way of detecting fraudulent papers in a multipage document. The occurrence of a forged paper in a multi-page document may have a substantial difference from rest of the papers in its age, type, color, texture, and so on. Each pixel in an HSI data can be used as the material fingerprint for the spatial point it corresponds to. Hence, hyperspectral data of paper samples made of the same substance have similar characteristics and can be grouped into a single cluster. Similarly, paper samples made of different substances have different spectral properties. This paper relies on this heuristic and proposes a tensor based clustering framework for hyperspectral paper data, with an application to detect the forged papers in multi-page documents. Information embedded in the hyperspectral patches of the papers to be clustered is arranged into individual lateral slices of a third-order tensor in this framework. Further, this work employs the self-expressiveness property of submodules and an objective function is formulated to extract self-expressive representation tensor with low multirank and f-diagonal structure. Objective function of the proposed method incorporates $l_{\frac {1}{2}}$ -induced Tensor Nuclear Norm (TNN) and $l_{\frac {1}{2}}$ regularization to impart better low rankness and f-diagonal structure to the representation tensor. Experimental results of the proposed method were compared to the state-of-the-art subspace clustering approaches. The results demonstrate improved performance of the proposed method over the existing clustering algorithms.

Moisture content and aging of oil-paper insulation are two important factors that cause deterioration of the insulation performance of power transformers. The water molecules and aging products are polar, which affects the dielectric response characteristics of the insulation system. Currently, the dielectric response testing technology has realized non-destructive evaluation of the moisture content of transformer insulation. However, the changes in the dielectric response caused by aging products are easily concealed by the influence of moisture, which makes the diagnostic technology ineffective for use in the evaluation of the aging of the oil-paper system. In order to avoid drawback, a new method utilizing frequency domain dielectric spectroscopy (FDS) and the water balance characteristics of the oil-paper insulation is proposed in this paper to evaluate the aging state of oil-paper insulation. The aging of oil-paper insulation will affect the water balance between oil and paper. In this paper, the experimental studies have shown that the water distribution coefficient between oil and paper and the degree of polymerization (DP) of the insulating paper shows a significant linear relationship. Accordingly, in this paper, FDS curves were used to evaluate the moisture content in the insulating paper, oil samples were taken to measure the moisture content in oil, and then the ratio of moisture content in oil and paper were calculated as the aging characteristic parameter. The linear relationship between the characteristic parameter and DP was used to evaluate the aging state of oil-paper insulation. The feasibility of the proposed method is preliminarily verified using oil-paper insulation samples at different aging states and with different moisture levels in the laboratory.

Studying the moisture diffusion in non-oil-immersed insulation paper is helpful to optimize the drying process and improve the drying efficiency of oil-immersed equipment. Moisture diffusion factor (MDF) is the key parameter to describe the moisture diffusion in non-oil-immersed insulation paper. Thermal aging affects the moisture absorption capacity of insulation paper obviously, thus, this paper intends to modify the empirical expression of MDF by considering the effects of thermal aging. The transient moisture contents of non-oil-immersed insulation paper with different thicknesses were measured at 40 °C and 60 °C, respectively. Then, the experimental values of MDF were extracted, and the empirical expression of MDF was modified by considering the effects of thermal aging. Finally, the modified expression of MDF was verified. The following conclusion can be obtained: 1) the equilibrium time constant of non-oil-immersed insulation paper increases with thermal aging; 2) the moisture absorption rate of non-oil-immersed insulation paper decreases with thermal aging, and; 3) the modified expression of MDF is reasonable and effective.

Oil-immersed insulation paper (OIP) bushing is one of the most important equipment in power transmission and distribution systems. Moisture is one of the most serious factors that affect the insulation status of OIP bushing. In this paper, the OIP bushing was assumed to be in a stable and simplicity condition, and then the transient moisture distribution of capacitor core and its effects on the electric field were studied. First, by dissecting a 110 kV OIP bushing, the specific sizes for modelling were obtained. Afterwards, a moisture diffusion model for OIP bushing was established based on COMSOL Multiphysics software, and it was also verified by moisture diffusion experiment. Then, the moisture distribution for different conditions were obtained and analyzed. Finally, a model for the electric field of OIP bushing was established, and then the effects of moisture on the electric field were studied.

The volume of research articles in digital repositories is increasing. This spectacular growth of repositories makes it rather difficult for researchers to obtain related research papers in response to their queries. The problem becomes worse when a researcher with insufficient knowledge of searching research articles uses these repositories. In the traditional recommendation approaches, the results of the query miss many high-quality papers, in the related work section, which are either published recently or have low citation count. To overcome this problem, there needs to be a solution which considers not only structural relationships between the papers but also inspects the quality of authors publishing those articles. Many research paper recommendation approaches have been implemented which includes collaborative filtering-based, content-based, and citation analysis-based techniques. The collaborative filtering-based approaches primarily use paper-citation matrix for recommendations, whereas the content-based approaches only consider the content of the paper. The citation analysis considers the structure of the network and focuses on papers citing or cited by the paper of interest. It is therefore very difficult for a recommender system to recommend high-quality papers without a hybrid approach that incorporates multiple features, such as citation information and author information. The proposed method creates a multilevel citation and relationship network of authors in which the citation network uses the structural relationship between the papers to extract significant papers, and authors' collaboration network finds key authors from those papers. The papers selected by this hybrid approach are then recommended to the user. The results have shown that our proposed method performs exceedingly well as compared with the state-of-the-art existing systems, such as Google scholar and multilevel simultaneous citation network.

Transformer insulation paper is a key indicator for transformer remaining operational life. Paper decomposition is evaluated using the degree of polymerization (DP) which calls for samples of insulation paper from operating transformers. Since collecting such paper samples is extremely difficult, other indicators have been used to indirectly reveal the DP value of insulation paper. This includes dissolved gases in transformer oil such as carbon oxides and hydrocarbon gases, furan compounds, methanol, ethanol, and moisture along with some oil characteristics such as interfacial tension. However, for the same oil sample, these individual parameters lead to different DP values. This is attributed to the lack of accuracy of the established mathematical and artificial intelligence models correlating DP with each of the above mentioned individual parameters. This paper presents a self-learning method to estimate the DP value of transformer insulation paper based on multiple transformer oil aging parameters. The proposed method comprises data processing, fuzzy c-means and linear regression. Results reveal that estimating the DP value based on multiple aging parameters is more accurate than estimating it using one single parameter as per the current practice. The proposed method not only helps to understand the correlation between multiple oil aging parameters and the DP value of paper insulation, but also promotes the establishment of more accurate life assessment models for power transformers based on these oil aging parameters.

Evolutionary game dynamics is a combination of game theory and dynamical systems. Using dynamical theory, we investigate chaotic behavior in asymmetric Rock-Paper-Scissors games under imitative dynamics with two different populations. Our theoretical analysis and numerical simulations demonstrate that the dynamical system can give rise to chaotic behavior in zero-sum and positive-sum asymmetric games. However, chaos cannot occur in a negative-sum asymmetric game. In particular, the numerical simulations show that there is a limit cycle in a negative-sum asymmetric game.

Methanol is regarded as an available indicator to analyze the aging condition of cellulose insulation. However, the diffusion mechanism of methanol molecules in the paper-oil insulation system is still unclear, since it cannot be explored by using only experiments. Given this issue, the molecular dynamics simulations were performed to investigate the diffusion mechanism of methanol molecules. In the current work, the mean square displacement of methanol during the diffusion process was calculated and analyzed, as well as its trajectory tracking. Then, the research on interaction energies and hydrogen bonds in paper/oil system were conducted. Finally, the effect of temperature on the diffusion of methanol molecules was also studied. Findings revealed that the diffusion of methanol in cellulose insulation is faster than that in insulating oil, besides, the presence of hydrogen bonds affects the diffusion rate of methanol molecules in cellulose insulation and insulating oil. Thus, the present findings could support the investigation of the diffusion mechanisms of methanol molecules, by which the aging condition evaluation of cellulose insulation could be also promoted.

The existing plethora of document classification techniques exploits different data sources either from the content or metadata of research articles. Various journal publishers like Springer, Elsevier, IEEE, etc., do not provide open access to the content of research articles, whereas metadata is freely available there. Metadata like title, keyword, and abstract can serve as a better alternative to the content in various scenarios. In the current literature, researchers have assessed the role of some of the metadata individually. We believe that the collective contribution of metadata parameters can play a significant role in classifying research papers. This paper presents a comprehensive evaluation of the role of metadata, individually as well as in combinations to achieve the objective of research paper classification. Moreover, we have classified the research articles into ACM hierarchy root categories (e.g. general literature, hardware, software, etc.). In this comprehensive evaluation, we have assessed all the possible combinations of metadata features against different classifiers such as Random Forest, K Nearest Neighbor, and Decision Tree. The results of this research reveal that the title & keywords combination outperforms other combinations with an F-measure score of 0.88.

The heat dissipation factor of conventional epoxy impregnated paper bushings is a subject of concern due to the large quantities of power in a High Voltage Direct Current (HVDC) system. The present work deals with the selection of better insulation as a replacement to the conventional resin impregnated material employing nano-hexagonal-Boron Nitride and nano-hexagonal-Boron Nitride added with nano-cellulose-fiber. The bushing of the converter transformer is designed using the Finite Element Method (FEM), and the electrothermal analysis is performed at the loaded working condition. Besides, numerous optimization schemes are also presented for adapting the structure of the thermal conductor enclosed in the inner conductor. The electrothermal performances of the above materials with the optimized structure are compared and an advanced scheme is proposed. Further, the results obtained from the designed system are employed in the form of an Artificial Neural Network to simplify the process of thermal computation characterized by the selected scheme. The internal parameters of the neural network are tuned implementing a hybrid amalgamation of Particle Swarm optimization - Grey Wolf Optimiser and the performance is compared against the actual values. The supremacy of the implemented algorithm is justified by a comparative analysis with other well-established algorithms using various statistical parameters.

Accurate modeling and simulation of electric field transients in HVDC cables is an important support to optimize insulation system design and to evaluate the influence of voltage transients and steady-state conditions on accelerated ageing mechanisms and insulation reliability. Traditionally, field models considering time-independent permittivity and conductivity are used, but this approach neglects polarization mechanisms and charge trapping-detrapping phenomena. This article includes polarization dynamics in the field model and shows that its impact on transient electric field simulations in HVDC paper-insulated cables can be significant. A method is presented to infer the model parameters from experimental polarization and depolarization current measurements.

Over the decades, the immense growth has been reported in research publications due to continuous developments in science. To date, various approaches have been proposed that find similarity between research papers by applying different similarity measures collectively or individually based on the content of research papers. However, the contemporary schemes are not conceptualized enough to find related research papers in a coherent manner. This paper is aimed at finding related research papers by proposing a comprehensive and conceptualized model via building ontology named COReS: Content-based Ontology for Research Paper Similarity. The ontology is built by finding the explicit relationships (i.e., super-type sub-type, disjointedness, and overlapping) between state-of-the-art similarity techniques. This paper presents the applications of the COReS model in the form of a case study followed by an experiment. The case study uses InText citation-based and vector space-based similarity measures and relationships between these measures as defined in COReS. The experiment focuses on the computation of comprehensive similarity and other content-based similarity measures and rankings of research papers according to these measures. The obtained Spearman correlation coefficient results between ranks of research papers for different similarity measures and user study-based measure, justify the application of COReS for the computation of document similarity. The COReS is in the process of evaluation for ontological errors. In the future, COReS will be enriched to provide more knowledge to improve the process of comprehensive research paper similarity computation.

We present a novel implementation of a Rock-Paper-Scissors (RPS) game interaction with a social robot. The framework is tailored to be computationally lightweight, as well as entertaining and visually appealing through collaboration with designers and animators. The fundamental gesture recognition pipeline employs a Leap motion device and two separate machine learning architectures to evaluate kinematic hand data on-the-fly. The first architecture is used to recognize and segment human motion activity in order to initialize the RPS play, and the second architecture is used to classify hand gestures into rock, paper or scissors. The employed tabletop robot interacts in the RPS play through unique animated gestural movements and vocalizations designed by animators which communicate the robot's choices as well as cognitive reflection on winning, losing and draw states. Performance of both learning architectures is carefully evaluated with respect to accuracy, reliability and run time performance under different feature and classifier types. Moreover, we assess our system during an interactive RPS play between robot and human. Experimental results show that the proposed system is robust to user variations and play style in real environment conditions. As such, it offers a powerful application for the subsequent exploration of social human-machine interaction.

In this paper, we present a new scheme for implementing virtual keyboards, which uses only two to four motion-recognition rings per hand and a two-dimensional keyboard template (e.g., an A4 size paper with printed key positions). It has the benefit of portability, customizability, and low-cost when compared with existing approaches. Essentially, we have shown that wearing two wireless IoT rings on the middle phalanges of two fingers of each hand, users can input the alphabetic characters into a computing device by typing on a flat paper on a desk, and potentially in mid-air. We have demonstrated that two rings are sufficient in capturing the gestures and motions of all fingers in a typing hand for keystrokes recognition. A single wireless IoT ring, which weighs 7.8 grams, consists of a Bluetooth low energy (BLE) unit, a micro inertial measurement unit (mIMU), and a cell battery. The 3-axes attitude angles and the Z-axis acceleration of each ring are adopted as the features for keystroke recognition. The overall keystroke recognition accuracy rate can reach as high as 94.8% when two IoT rings are worn by a user on each hand; this accuracy rate increases to 98.6%, when four rings are worn on each typing hand.