Search

Oligomeric oxymethylene dimethyl ethers (OMEs) of the type CH3O-(CH2O)n-CH3 are promising diesel fuels with an enormous potential for the reduction of soot and NOx emissions. Oligomers with n = 3–5 are particularly advantageous, since their physicochemical and combustion properties are similar to conventional diesel. OMEs can be produced from methanol and formaldehyde but a series of byproducts, especially hemiformals, glycols, water and minor amounts of cyclic ethers, are also formed. These need to be separated from the product mixtures, which affects efficiency of this synthesis pathway. To isolate the desired OMEs, a one-step synthesis/extraction procedure is described. It implies highly selective extraction of OMEs from aqueous reaction solutions employing hydrocarbons as extraction agents. If fuel-type hydrocarbons are used, the resulting OME-hydrocarbon blends can be directly used in fuel applications. The corresponding oxymethylene diethyl ethers (OMDEEs) have also been investigated. Compared to OMEs, OMDEEs exhibit an increased solubility in nonpolar media but, as a result, solubility of educts and byproducts also increases. OME blends with hydrogenated vegetable oil and diesel have been prepared containing 10% of OMEs. It could be shown that such blends meet current diesel standards to a large extent.

Oligomeric oxymethylene dimethyl ethers (OMDMEs, CH3O–(CH2O)n–CH3) are promising diesel fuel additives, which can reduce soot formation as well as NOx emissions. Due to the poor availability of high purity OMDMEs a comprehensive characterization of diesel standards was not feasible until now. Two types of oxymethylene dialkylethers (OMDMEs and oxymethylene diethyl ethers, OMDEEs) were synthesized, purified and characterized with respect to their physico-chemical and fuel properties. Density, melting point, flash point, auto ignition point as well as lubricity, kinematic viscosity and surface tension of OMDMEs and OMDEEs were measured and compared to the corresponding n-alkanes. Fuel requirements such as boiling points, flash points and surface tensions can be fulfilled by OMDMEs and OMDEEs. Furthermore, OMDMEs (n = 3–5) and OMDEEs (n = 2–4) are, due to their high cetane numbers of 124–180 and 64–103, particularly promising since cetane numbers in this range can lead to improved motor efficiency and smoother fuel combustion. Additionally, the heat of combustion as well as the standard enthalpy of formation and reaction were determined. Apart from somewhat lower heating values, OMDMEs exhibit fuel properties similar to conventional diesel complying the required fuel standards without the need of changing engines or fuel infrastructures.