Search

Polycyclic aromatic hydrocarbons (PAHs) are widely used in organic electronic devices. The electronic, magnetic, and optical properties of PAHs can be tuned by structural modifications to the aromatic backbone to introduce an inherent distortion from planarity, such as bending or twisting. However, it remains difficult to isolate and control the effects of such distortions. Here, we sought to understand how backbone twisting and bending affect the electronic properties of acenes, as models for larger PAHs. We found that, even when highly distorted from planarity (30° per ring), acenes maintain their aromatic character and π orbital delocalization with minor mixing of the σ and π orbitals. In addition, the energy gap between the HOMO and LUMO decreases with increasing twist, while the gap is hardly affected by bending, since the energy of both orbitals increase to a similar extent. For bent acenes in the triplet state, the spin becomes more localized with increasing bend, whereas twisting produces an evenly distributed spin delocalization. These findings can guide the synthesis of PAHs with tailored properties., A computational study performed on nonplanar acenes demonstrates the different effects of bending and twisting on the effect on their electronic properties.

The reactivity of 5‐(alkynyl)dibenzothiophenium salts 1 is explored in the presence of different nucleophiles, dienes, and under photochemical conditions. Reaction with lithium acetylides affords diynes in moderate yields; while depending on the substitution pattern, the reaction with sulfinates delivers either the alkyne transfer products, alkynyl sulfones, or β‐(sulfonium) vinyl sulfones through addition to the C−C triple bond. Similar behavior is observed when tosylamines are used as nucleophiles. Salts of general formula 1 also react with dienes to render the corresponding Diels‐Alder cycloadducts. The vinyl sulfonium salts obtained by these routes further react with nucleophiles through a Michael addition, dibenzothiophene elimination sequence. Alternatively, they also engage in photoinduced radical cyclizations to produce substituted phenanthrenes. Attempts to use this specific addition/radical cyclization sequence for the construction of the 6a,7‐dehydroaporphine skeleton present in several families of alkaloids are also described., The synthetic potential of 5‐(alkynyl)benzothiophenium salts is further evaluated. In addition to their reactivity as electrophilic alkynylation reagents, they undergo regioselective additions to the C−C triple bond. The products thus obtained can be used for the synthesis of Z‐vinyl sulfones and 9,10‐substituted phenanthrenes.

Chiral zirconium(IV) double cage sandwich complex Zr(1)2 has been synthesized in one step from porphyrin cage H21. Zr(1)2 was obtained as a racemate, which was resolved by HPLC and the enantiomers were isolated in >99.5 % ee. Their absolute configurations were assigned on the basis of X‐ray crystallography and circular dichroism spectroscopy. Vibrational circular dichroism (VCD) experiments on the enantiomers of Zr(1)2 revealed that the chirality around the zirconium center is propagated throughout the whole cage structure. The axial conformational chirality of the double cage complex displayed a VCD fingerprint similar to the one observed previously for a related chiral cage compound with planar and point chirality. Zr(1)2 shows fluorescence, which is quenched when viologen guests bind in its cavities. The binding of viologen and dihydroxybenzene derivatives in the two cavities of Zr(1)2 occurs with negative allostery, the cooperativity factors α (=4 K2/K1) being as low as 0.0076 for the binding of N,N’‐dimethylviologen. These allosteric effects are attributed to a pinching of the second cavity as a result of guest binding in the first cavity., Starting from achiral porphyrin cage compounds, chiral zirconium(IV) double decker porphyrin cages have been prepared and their enantiomers resolved. The binding of two viologen guests in the double decker porphyrin cages occurs via a strongly negative allosteric effect, resulting in an almost 3 orders of magnitude weaker binding of the second viologen guest compared to that of the first.

The synthesis and characterization of double porphyrin cage compounds are described. They consist of two porphyrins that are each attached to a diphenylglycoluril‐based clip molecule via four ethyleneoxy spacers, and are linked together by a single alkyl chain using “click”‐chemistry. Following a newly developed multistep synthesis procedure we report three of these double porphyrin cages, linked by spacers of different lengths, i.e. 3, 5, and 11 carbon atoms. The structures of the double porphyrin cages were fully characterized by NMR, which revealed that they consist of mixtures of two diastereoisomers. Their zinc derivatives are capable of forming sandwich‐like complexes with the ditopic ligand 1,4‐diazabicyclo[2,2,2]octane (dabco)., The synthesis of double porphyrin cage compounds based on glycoluril is described. Through a multistep synthesis, three double cage compounds linked by spacers of variable length are obtained. The binding and conformational properties of their zinc derivatives towards the ditopic ligand dabco have been investigated into detail.John Wiley & Sons, Ltd.

A one‐pot multi‐step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is described as an alternative to ozonolysis. The first step is a highly efficient manganese catalyzed epoxidation/cis‐dihydroxylation of alkenes. This step is followed by an Fe(III) assisted ring opening of the epoxide (where necessary) to a 1,2‐diol. Carbon–carbon bond cleavage is achieved by treatment of the diol with sodium periodate. The conditions used in each step are not only compatible with the subsequent step(s), but also provide for increased conversion compared to the equivalent reactions carried out on the isolated intermediate compounds. The described procedure allows for carbon–carbon bond cleavage in the presence of other alkenes, oxidation sensitive moieties and other functional groups; the mild conditions (r.t.) used in all three steps make this a viable general alternative to ozonolysis and especially for use under flow or continuous batch conditions., A one‐pot multi‐step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is reported. Combining a highly efficient manganese catalyzed epoxidation/cis‐dihydroxylation with Fe(III)(ClO4)3 assisted ring opening is followed by periodiate cleavage of the resulting diol.John Wiley & Sons, Ltd.

1,4‐Triazolyl combretacoumarins have been prepared by linking the trimethoxyarene unit of combretastatin A4 with coumarins, via a 1,2,3‐triazole. For this, 4‐azidocoumarins were accessed by a sequential two‐step, one‐pot reaction of 4‐hydroxycoumarins with (benzotriazol‐1‐yloxy)tris(dimethylamino)phosphonium hexafluorophosphate (BOP), followed by reaction with NaN3. In the reaction with BOP, a coumarin‐derived phosphonium ion intermediate seems to form, leading to an O 4‐(benzotriazolyl)coumarin derivative. For the CuAAC reaction of azidocoumarins with 5‐ethynyl‐1,2,3‐trimethoxybenzene, catalytic [(MeCN)4Cu]PF6 in CH2Cl2/MeOH with 2,6‐lutidine, at 50 oC, was suitable. The 4‐azidocoumarins were less reactive as compared to PhN3 and the NBO coefficients of the azido groups were compared by DFT analysis. Compound solubility was a problem in biological assays. On the basis of the biological and solubility data of one 1,4‐triazolyl combretacoumarin, four analogs lacking one or two methoxy groups were synthesized. Reactivity differences among the phenylacetylenes were noted and the NBO coefficients of the alkynes were compared by DFT analysis. In cytotoxicity assays, 1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐1,2,3‐triazole showed activity in CEM and MDA‐MB‐231 cell lines by apoptosis. The desmethoxy 6‐bromo‐4‐(4‐(4‐methoxyphenyl)‐1H‐1,2,3‐triazol‐1‐yl)‐2H‐chromen‐2‐one also showed cytotoxicity against the two cell lines, but this did not appear to be consistent with apoptosis. The antiviral activity of the compounds was unremarkable., A facile, one‐pot synthesis of 4‐azidocoumarins from 4‐hydroxycoumarins has been developed. Cu‐catalyzed azide‐alkyne cycloaddition of these compounds with 5‐ethynyl‐1,2,3‐trimethoxybenzene or mono and dimethoxy phenylacetylenes gave a series of 1,4‐triazolyl combretacoumarins and desmethoxy analogs. These were analyzed for their antiproliferative and antiviral properties.John Wiley & Sons, Ltd.This article is being made freely available through PubMed Central as part of the COVID-19 public health emergency response. It can be used for unrestricted research re-use and analysis in any form or by any means with acknowledgement of the original source, for the duration of the public health emergency.

The kinetic resolution of α‐substituted aminopentenes via intramolecular hydroamination was investigated using various 3,3′‐silyl‐substituted binaphtholate yttrium catalysts. High efficiencies in the kinetic resolution were observed for methyl‐, benzyl‐, and phenyl‐substituted substrates utilizing the cyclohexyldiphenylsilyl‐substituted catalyst 2c with resolution factors reaching as high as 90(5) for hex‐5‐en‐2‐amine (3a). Kinetic analysis of the enantioenriched substrates with the matching and mismatching catalyst revealed that the efficiency of catalyst 2c benefits significantly from a favorable Curtin–Hammett pre‐equilibrium and by a large kfast/kslow ratio. Other binaphtholate catalysts were less efficient due to a less favorable Curtin–Hammett pre‐equilibrium, which often favored the mismatching substrate‐catalyst combination. Cyclization of the matched substrate proceeds generally with large trans‐selectivity, whereas the trans/cis‐ratio for mismatched substrates is significantly diminished, favoring the cis‐cyclization product isomer in some instances.

The Beckmann rearrangement of oximes to amides typically requires strong acids or highly reactive, hazardous electrophiles and/or elevated temperatures to proceed. A very attractive alternative is the in situ generation of Vilsmeier-Haack reagents, by means of photoredox catalysis, as promoters for the thermal Beckmann rearrangement. Investigation of the reaction parameters for this light-induced method using a one-pot strategy has shown that the reaction is limited by the different temperatures required for each of the two sequential steps. Using a continuous flow reactor, the photochemical and thermal processes have been separated by integrating a flow photoreactor unit at low temperature for the electrophile generation with a second reactor unit, at high temperature, where the rearrangement takes place. This strategy has enabled excellent conversions and yields for a diverse set of oximes, minimizing the formation of side products obtained with the original one-pot method.

A revised modular approach to various synthetic (–)‐trans‐Δ8‐THC derivatives through late‐stage Suzuki–Miyaura cross‐coupling reactions is disclosed. Ten derivatives were synthesized allowing both sp2‐ and sp3‐hybridized cross‐coupling partners with minimal β‐hydride elimination. Importantly, we demonstrate that a para‐bromo‐substituted THC scaffold for Suzuki–Miyaura cross‐coupling reactions has been initially reported incorrectly in recent literature.

Protoporphyrin IX (PPIX) is the porphyrin scaffold of heme b, a ubiquitous prosthetic group of proteins responsible for oxygen binding (hemoglobin, myoglobin), electron transfer (cytochrome c) and catalysis (cytochrome P450, catalases, peroxidases). PPIX and its metallated derivatives frequently find application as therapeutic agents, imaging tools, catalysts, sensors and in light harvesting. The vast toolkit of accessible porphyrin functionalization reactions enables easy synthetic modification of PPIX to meet the requirements for its multiple uses. In the past few years, particular interest has arisen in exploiting the interaction of PPIX and its synthetic derivatives with biomolecules such as DNA and heme‐binding proteins to evolve molecular devices with new functions as well as to uncover potential therapeutic toeholds. This review strives to shine a light on the most recent developments in the synthetic chemistry of PPIX and its uses in selected fields of chemical biology., The use of the heme precursor protoporphyrin IX for biological applications has experienced a steep increase in recent years. Herein, we review possibilities for synthetic modification of this porphyrin scaffold and discuss its emerging key uses in the field of chemical biology.John Wiley & Sons, Ltd.

We herein report an ammonium salt‐catalyzed protocol for the regioselective ring opening of aryl‐aziridines with β‐keto esters. The reaction gives access to a variety of highly functionalized target molecules with two consecutive stereogenic centers and can be rendered enantioselective (up to e.r. = 91:9) by using bifunctional chiral ammonium salt catalysts., The quaternary ammonium salt‐catalyzed addition of β‐keto esters to aryl‐aziridines gives access to structurally diverse target molecules with two consecutive stereocenters.John Wiley & Sons, Ltd.

We herein report an unprecedented strategy for the asymmetric α‐chlorination of β‐keto esters with hypervalent iodine‐based Cl‐transfer reagents using simple Cinchona alkaloid catalysts. Our investigations support an α‐chlorination mechanism where the Cinchona species serves as a nucleophilic catalyst by reacting with the chlorinating agent to generate a chiral electrophilic Cl‐transfer reagent in situ. Using at least 20 mol‐% of the alkaloid catalyst allows for good yields and enantioselectivities for a variety of different β‐keto esters under operationally simple conditions., Simple Cinchona alkaloids serve as nucleophilic organocatalysts to facilitate the enantioselective α‐chlorination of β‐keto esters by using hypervalent iodine‐based Cl‐transfer reagentsJohn Wiley & Sons, Ltd.

Bench‐stable meso‐substituted di(p/m‐benzi)homoporphyrins were synthesized through acid‐catalyzed condensation of dipyrrole derivatives with aryl aldehydes. The insertion of a 1,1,2,2‐tetraphenylethene (TPE) or but‐2‐ene‐2,3‐diyldibenzene unit in the porphyrin framework results in the formation of dibenzihomoporphyrins, merging the features of hydrocarbons and porphyrins. Single crystal X‐ray analyses established the non‐planar structure of these molecules, with the phenylene rings out of the mean plane, as defined by the dipyrromethene moiety and the two meso‐carbon atoms. Spectroscopic and structural investigations show that the macrocycles exhibit characteristics of both TPE or but‐2‐ene‐2,3‐diyldibenzene and dipyrromethene units indicating the non‐aromatic characteristics of the compounds synthesized. Additionally, the dibenzihomoporphyrins were found to generate singlet oxygen, potentially allowing their use as photosensitizers., A series of dibenzihomoporphyrins were synthesized by incorporation of phenylene para‐ and meta‐linkages into the macrocycles. Structural elucidation revealed non‐aromatic property due to a lack of effective π‐conjugation and non‐planarity of the macrocycles. Furthermore, these macrocycles were shown to act as photosensitizers for singlet oxygen generation.John Wiley & Sons, Ltd.

Bicyclo[1.1.1]pentane (BCP) is studied extensively as a bioisosteric component of drugs. Not found in nature, this molecular unit approximates the distance of a para‐disubstituted benzene which is replaced in medicines as a method of improving treatments. Predicting interactions of these drugs with specific active sites requires knowledge of the non‐covalent interactions engaged by this subunit. Structure determinations and computational analysis (Hirshfeld analysis, 2D fingerprint plots, DFT) of seven BCP derivatives chosen to probe specific and directional interactions. X‐ray analysis revealed the presence of various non‐covalent interactions including I ⋅⋅⋅ I, I ⋅⋅⋅ N, N−H ⋅⋅⋅ O, C−H ⋅⋅⋅ O, and H−C ⋅⋅⋅ H−C contacts. The preference of halogen bonding (I ⋅⋅⋅ I or I ⋅⋅⋅ N) in BCP 1–4 strictly depends upon the electronic nature and angle between bridgehead substituents. The transannular distance in co‐crystals 2 and 4 was longer as compared to monomers 1 and 3. Stronger N−H ⋅⋅⋅ O and weaker C−H ⋅⋅⋅ O contacts were observed for BCP 5 while the O ⋅⋅⋅ H interaction was a prominent contact for BCP 6. The presence of 3D BCP units prevented the π ⋅⋅⋅ π stacking between phenyl rings in 3, 4, and 7. The BCP skeleton was often rotationally averaged, indicating fewer interactions compared to bridgehead functional groups. Using DFT analysis, geometries were optimized and molecular electrostatic potentials were calculated on the BCP surfaces. These interaction profiles may be useful for designing BCP analogs of drugs., The effect of bridgehead substitutions on non‐covalent interactions was investigated for seven BCP derivatives. The X‐ray analyses show 3D‐structures and a combination of non‐covalent interactions including HB, XB, and CH ⋅⋅⋅ HC contacts. QTAIM analysis and MEP graphs show the presence of bond critical points and σ‐holes.

Fluorination and trifluoromethylation are indispensable tools in the preparation of modern pharmaceuticals and APIs. Herein we present a concept for the introduction of a trifluoromethyl group into unprotected phenols employing catalytic copper(I) iodide and hydroquinone, tBuOOH, and the Langlois' reagent. The method proceeds under mild conditions and exhibits an extended substrate scope compared to the biocatalytic trifluoromethylation using laccase from Agaricus bisporus. Various functional groups such as aldehydes, esters, ethers, ketones and nitriles were tolerated. The hydroquinone-mediated trifluoromethylation reaction allowed accessing trifluoromethylated phenols, which are cumbersome to prepare via previously known chemical methods.

Aldoses exist predominantly in the cyclic hemiacetal form, which is in equilibrium with the open‐chain aldehyde form. The small aldehyde content hampers reactivity when chemistry addresses the carbonyl moiety. This low concentration of the available aldehyde is generally difficult to ascertain. Herein, we demonstrate a new kinetic determination of the (minute) open‐chain content (OCC) of aldoses. This kinetic approach exploits the aldehyde‐selectivity of 2‐aminobenzamidoxime (ABAO), which furnishes a strongly UV‐active adduct. Simple formation curves can be measured in a photometer or plate reader for high‐throughput screening. Under pseudo‐first order kinetics, these curves correlate with a prediction model yielding the relative OCC. The OCCs of all parent aldoses (pentoses and hexoses) were determined referencing against the two tetroses with exceptionally high OCCs and were in very good agreement with literature data. Additionally, the assay was extended towards higher‐carbon sugars with unknown OCC and also applied to rationalise a lack of reactivity observed in a recent synthetic investigation., An operationally simple UV‐based kinetic assay allows the accurate determination of the minute proportions (

In this paper we outline how dihalohydration reactions of propargylic alcohols can be used to access a wide variety of useful halogenated building blocks. A novel procedure for dibromohydration of alkynes has been developed, and a selection of dichloro and dibromo diols and cyclic ethers were synthesized. The dihalohydration of homo‐propargylic alcohols provides a useful route to 3‐halofurans, which were shown to readily undergo cycloaddition reactions under mild conditions. Finally, a novel ring expansion of propargylic alcohols containing a cyclopropylalkyne provides access to halogenated alkenylcyclobutanes.

The syntheses of a series of 1‐phenyl‐5‐phosphino 1,2,3‐triazoles are disclosed, within which, the phosphorus atom (at the 5‐position of a triazole) is appended by one, two or three triazole motifs, and the valency of the phosphorus(III) atom is completed by two, one or zero ancillary (phenyl or cyclohexyl) groups respectively. This series of phosphines was compared with tricyclohexylphosphine and triphenylphosphine to study the effect of increasing the number of triazoles appended to the central phosphorus atom from zero to three triazoles. Gold(I) chloride complexes of the synthesised ligands were prepared and analysed by techniques including single‐crystal X‐ray diffraction structure determination. Gold(I) complexes were also prepared from 1‐(2,6‐dimethoxy)‐phenyl‐5‐dicyclohexyl‐phosphino 1,2,3‐triazole and 1‐(2,6‐dimethoxy)‐phenyl‐5‐diphenyl‐phosphino 1,2,3‐triazole ligands. The crystal structures thus obtained were examined using the SambVca (2.0) web tool and percentage buried volumes determined. The effectiveness of these gold(I) chloride complexes to serve as precatalysts for alkyne hydration were assessed. Furthermore, the regioselectivity of hydration of but‐1‐yne‐1,4‐diyldibenzene was probed.

Lanthanide triflates are effective Lewis acid catalysts in reactions involving carbonyl compounds due to their high oxophilicity and water stability. Despite the growing interest, the identity of the catalytic species formed in lanthanide catalysed reactions is still unknown. We have therefore used mass spectrometry and ion spectroscopy to intercept and characterize the intermediates in a reaction catalysed by ytterbium and dysprosium triflates. We were able to identify a number of lanthanide intermediates formed in a simple condensation reaction between a C‐acid and an aldehyde. Results show correlation between the reactivity of lanthanide complexes and their charge state and suggest that the triply charged complexes play a key role in lanthanide catalysed reactions. Spectroscopic data of the gaseous ions accompanied by theoretical calculations reveal that the difference between catalytic efficiencies of ytterbium and dysprosium ions can be explained by their different electrophilicity., Knoevenagel condensation can be accelerated by addition of Lewis acids. This work shows a number of intermediates along the reaction path catalyzed by ytterbium and dysprosium and compares relative reaction rates. The main conclusion is: the larger the electrostatic field of the Lewis acid, the more activated the intermediates, and the faster the reaction.John Wiley & Sons, Ltd.

As part of a project aimed at the development of chiral processive catalysts that can write information on a polymer chain we describe the synthesis of two optically active porphyrin macrocycles, which are prepared in 3 steps from an achiral precursor compound. Fluorescence and 1H‐NMR studies show that one of the macrocycles displays selectivity in the binding of chiral viologen guest molecules.

Cyclophellitol aziridine and its configurational and functional isomers are powerful covalent inhibitors of retaining glycosidases, and find application in fundamental studies on glycosidases, amongst others in relation to inherited lysosomal storage disorders caused by glycosidase malfunctioning. Few direct and stereoselective aziridination methodologies are known for the synthesis of cyclophellitol aziridines. Herein, we present our studies on the scope of direct 3‐amino‐2‐(trifluoromethyl)quinazolin‐4(3H)‐one‐mediated aziridination on a variety of configurational and functional cyclohexenol isosters. We demonstrate that the aziridination can be directed by an allylic or homoallylic hydroxyl through H‐bonding and that steric hindrance plays a key role in the diastereoselectivity of the reaction., This work describes direct aziridination reactions on differently substituted glycoside configured cyclohexenes with 3‐amino‐2‐(trifluoromethyl)quinazolin‐4(3H)‐one as nitrogen donor. It is shown that aziridination can be directed by allylic or homoallylic hydroxyls through H‐bonding, and that steric hindrance plays an essential role in the diastereoselective outcome of the final cyclitols aziridines.John Wiley & Sons, Ltd.

The nucleophilic substitution of aromatic moieties (SNAr) has been known for over 150 years and found wide use for the functionalization of (hetero)aromatic systems. Currently, several “types” of SNAr reactions have been established and notably the area of porphyrinoid macrocycles has seen many uses thereof. Herein, we detail the SNAr reactions of seven types of porphyrinoids with differing number and type of pyrrole units: subporphyrins, norcorroles, corroles, porphyrins, azuliporphyrins, N‐confused porphyrins, and phthalocyanines. For each we analyze the substitution dependent upon: a) the type of nucleophile and b) the site of substitution (α, β, or meso). Along with this we evaluate this route as a synthetic strategy for the generation of unsymmetrical porphyrinoids. Distinct trends can be identified for each type of porphyrinoid discussed, regardless of nucleophile. The use of nucleophilic substitution on porphyrinoids is found to often be a cost‐effective procedure with the ability to yield complex substituent patterns, which can be conducted in non‐anhydrous solvents with easily accessible simple porphyrinoids., An up to date review regarding the SNAr of seven different types of porphyrinoids, each containing differing numbers and types of pyrrole rings and meso positions is presented. The reactivity and mechanistic analysis of subporphyrins, norcorroles, corroles, porphyrins, azuliporphyrins, N‐confused porphyrins, and phthalocyanines shows a bright future for the generation of unsymmetrical porphyrinoids via this reaction mechanism.John Wiley & Sons, Ltd.

Glucaric acid has potential applications in food, pharmaceutical and polymer industries yet no methodology exists within the public domain for isolation of this key bio-derived platform molecule as a pure, crystalline solid. Here we demonstrate the difficulties, which arise in doing so and report development of a process for derivation of free-glucaric acid from its Ca2+/K+ glucarate salts, which are both commercially available. Employing Amberlyst-15 (H+) exchange resin and azeotrope drying, powdered glucaric acid is prepared at > 99.96 % purity in 98.7 % dry yield.

A method has been developed for the conversion of primary, secondary, and tertiary alcohols, and phenol, into the corresponding esters at room temperature. The method uses a titanium(III) species generated from a substoichiometric amount of titanocene dichloride together with manganese(0) as a reductant, as well as methylene diiodide. It involves a transesterification from an ethyl ester, or a reaction with an acyl chloride. A radical mechanism is proposed for these transformations.

The synthesis of a new C 3v‐symmetric crushed fullerene C60H24 (5) has been accomplished in three steps from truxene through sixfold palladium‐catalyzed intramolecular arylation of a syn‐trialkylated truxene precursor. Laser irradiation of 5 induces cyclodehydrogenation processes that result in the formation of C60, as detected by LDI‐MS.

A completely regioselective and highly stereoselective palladium‐catalyzed intramolecular hydroarylation of arenesulfonyl ynamines to benzothiazoles was developed. The presence of an electron‐withdrawing group on the triple bond of the sulfonyl ynamine was crucial for the success of the reaction and our mechanistic studies suggest an alkyne‐directed 5‐exo‐dig cyclization pathway. The products easily underwent photoinduced rearrangement to 3‐amino‐1‐benzothiophene‐1,1‐diones (up to 35 % yields after two steps).

Pre‐activation based glycosylations have become a very powerful tool in the assembly of oligosaccharides and the use of nucleophilic additives allows for the in situ generation of reactive intermediates with tailored reactivity. We here use a glycosylation strategy that is based on the use of per‐benzylated imidate building blocks for the fully stereoselective construction of a spacer equipped Aspergillus fumigatus α‐1,3‐octaglucan. We have used the trimethylsilyl iodide (TMSI)‐triphenylphosphine oxide (Ph3P=O) for the stereoselective installation of an azidopropanol spacer and triflic acid (TfOH)‐dimethyl formamide (DMF) enabled glycosylations for the coupling reactions with the secondary glucosyl C‐3‐alcohols. An operationally simple in situ activation coupling procedure is introduced and used for the final glycosylation events towards the octasaccharide.

The robust CoI precatalyst [CpCo(P{OEt}3)(trans‐MeO2CHC=CHCO2Me)] was investigated in cyclotrimerizations, furnishing benzenes and pyridines from triynes, diynes and nitriles, comparing the influence of different ways of energy supply; namely, irradiation and conventional (thermal) or microwave heating. The precatalyst was found to work under all conditions, including the possibility to catalyze cyclotrimerizations at room temperature under photochemical conditions at longer reaction times. Performance of the reactions in a microwave reactor proved to be the most time‐efficient way to rapidly assemble the expected reaction products; however, careful selection of reaction conditions can be required. The synthesis of pyridines and isoquinolines successfully involved the utilization of versatile functionalized nitriles, affording structurally interesting reaction products. Comparison with the known and often applied precatalyst CpCo(CO)2 demonstrated the significantly higher reactivity of the CpCoI–phosphite–olefin precatalyst.

Dynamic combinatorial chemistry (DCC) represents an approach, whereby traditional supramolecular scaffolds used for protein surface recognition might be exploited to achieve selective high affinity target recognition. Synthesis, in situ screening and amplification under selection pressure allows the generation of ligands, which bear different moieties capable of making multivalent non‐covalent interactions with target proteins. Generic tetracarboxyphenyl porphyrin scaffolds bearing four hydrazide moieties have been used to form dynamic combinatorial libraries (DCLs) using aniline‐catalyzed reversible hydrazone exchange reactions, in 10 % DMSO, 5 mm NH4OAc, at pH 6.75. High resolution mass spectrometry (HRMS) was used to monitor library composition and establish conditions under which equilibria were established.

Neisseria meningitidis serogroup A (MenA) is an aerobic diplococcal Gram‐negative bacterium responsible for epidemic meningitis disease. Its capsular polysaccharide (CPS) has been identified as the primary virulence factor of MenA. This polysaccharide suffers from chemical lability in water. Thus, the design and synthesis of novel and hydrolytically stable structural analogues of MenA CPS may provide additional tools for the development of therapies against this disease. In this context, the structural features of the natural phosphorylated monomer have been analyzed and compared to those of its carba‐analogue, where the endocyclic oxygen has been replaced by a methylene moiety. The lowest energy geometries of the different molecules have been calculated using a combination of quantum mechanical techniques and molecular dynamics simulations. The predicted results have been compared and validated using NMR experiments. The results indicate that the more stable designed glycomimetics may adopt the conformation adopted by the natural monomer, although they display a wider flexibility around the torsional degrees of freedom.

α‐Hydroxy ketones are valuable synthons in organic chemistry. Here we show that oxidation of vic‐diols to α‐hydroxy ketones with H2O2 can be achieved with an in situ prepared catalyst based on manganese salts and pyridine‐2‐carboxylic acid. Furthermore the same catalyst is effective in alkene epoxidation, and it is shown that alkene oxidation with the MnII catalyst and H2O2 followed by Lewis acid ring opening of the epoxide and subsequent oxidation of the alkene to α‐hydroxy ketones can be achieved under mild (ambient) conditions.

Cyclopropanes provide important design elements in medicinal chemistry and are widely present in drug compounds. Here we describe a strategy and extensive synthetic studies for the preparation of a diverse collection of cyclopropane‐containing lead‐like compounds, fragments and building blocks exploiting a single precursor. The bifunctional cyclopropane (E/Z)‐ethyl 2‐(phenylsulfanyl)‐cyclopropane‐1‐carboxylate was designed to allow derivatization through the ester and sulfide functionalities to topologically varied compounds designed to fit in desirable chemical space for drug discovery. A cobalt‐catalyzed cyclopropanation of phenyl vinyl sulfide affords these scaffolds on multigram scale. Divergent, orthogonal derivatization is achieved through hydrolysis, reduction, amidation and oxidation reactions as well as sulfoxide–magnesium exchange/functionalization. The cyclopropyl Grignard reagent formed from sulfoxide exchange is stable at 0 °C for > 2 h, which enables trapping with various electrophiles and Pd‐catalyzed Negishi cross‐coupling reactions. The library prepared, as well as a further virtual elaboration, is analyzed against parameters of lipophilicity (ALog P), MW and molecular shape by using the LLAMA (Lead‐Likeness and Molecular Analysis) software, to illustrate the success in generating lead‐like compounds and fragments.

The synthesis of chiral tetrahydrofurans and pyrrolidines starting from 1,2‐diols or β‐amino alcohols, respectively, by visible‐light‐mediated deoxygenation is described. Easily accessible monoallylated/propargylated substrates were activated either as inexpensive ethyl oxalates or as recyclable 3,5‐bis(trifluoromethyl)benzoates to generate alkyl radicals suitable for 5‐exo‐trig/5‐exo‐dig cyclizations under visible‐light irradiation.

We report the use of bifunctional starting materials (ketoacids) in a diastereoselective Passerini three‐center‐two‐component reaction. Study of the reaction scope revealed the required structural features for stereoselectivity in the isocyanide addition. In this system, an interesting isomerization of the primary Passerini product – the α‐carboxamido lactone – into an atypical product, an α‐hydroxy imide, was found to occur under acidic conditions. Furthermore, enantioenriched Passerini products can be generated from an enantioenriched ketoacid obtained by chemoenzymatic synthesis.

Sesquiterpenes are an important family of natural products, many of which exhibit important pharmaceutical and agricultural properties. They are biosynthesised from farnesyl diphosphate in sesquiterpene synthase catalysed reactions. Here, we report the development of a highly efficient segmented flow system for the enzyme‐catalysed continuous flow production of sesquiterpenes. Design of experiment (DoE) methods were used to optimise the performance of the flow biocatalysis, and quantitative yields were achieved by using an operationally simple but highly effective segmented flow system.

One of the most well-known, highly utilized reagents for ether cleavage is boron tribromide (BBr3), and this reagent is frequently employed in a 1:1 stoichiometric ratio with ethers. Density functional theory calculations predict a new mechanistic pathway involving charged intermediates for ether cleavage in aryl methyl ethers. Moreover, these calculations predict that one equivalent of BBr3 can cleave up to three equivalents of anisole, producing triphenoxyborane [B(OPh)3] prior to hydrolysis. These predictions were validated by gas chromatography analysis of reactions where the BBr3:anisole ratio was varied. Not only do we confirm that sub-stoichiometric equivalents may be used for ether demethylation, but the findings also support our newly proposed three cycle mechanism for cleavage of aryl methyl ethers.

Crossed McMurry reactions of bifuran- or bithiophenedicarbaldehydes with bipyrroledicarbaldehydes have been studied for the first time. Only those porphycenic macrocycles derived from homocoupled McMurry products were formed. The results are explained by using both density functional theory and electron propagator computations to model the electron affinity of the dialdehyde starting materials. It was predicted that bifuran\bithiophene cross-coupling would indeed occur, and this was demonstrated by the first synthesis of a novel dioxa,dithio hetero-porphycenoid annulene. This approach will allow the prior identification of viable substrates for related crossed McMurry reactions.

Hydrophilic coordinating chiral ionic liquids with an amino alcohol substructure were developed and efficiently applied to the asymmetric reduction of ketones. Their careful design and adaptability to the desired reaction conditions allow for these chiral ionic liquids to be used as the sole source of chirality in a ruthenium-catalyzed transfer hydrogenation reaction of aromatic ketones. When used in this reaction system, these chiral ionic liquids afforded excellent yields and high enantioselectivities.

Ketenes were generated by the thermolysis of alkoxyalkynes under flow conditions, and then trapped with amines and alcohols to cleanly give amides and esters. For a 10 min reaction time, temperatures of 180, 160, and 140 °C were required for >95?% conversion of EtO, iPrO, and tBuO alkoxyalkynes, respectively. Variation of the temperature and flow rate with inline monitoring of the output by IR spectroscopy allowed the kinetic parameters for the conversion of 1-ethoxy-1-octyne to be easily estimated (Ea = 105.4 kJ/mol). Trapping of the in-situ-generated ketenes by alcohols to give esters required the addition of a tertiary amine catalyst to prevent competitive [2+2] addition of the ketene to the alkoxyalkyne precursor

The direct arylation of benzo[b]furan, benzo[b]thiophene, and indole has been studied by using aromatic bromides as the aryl source. The protocol employing common reagents and a Pd catalyst has led to the regioselective arylation of these heterocycles at the 2-position. A range of functional groups were tolerated, providing quick access to a variety of arylated benzo-fused heterocycles that would be accessible more elaborately using classical synthetic strategies. This is the first systematic study of the direct arylation of benzo[b]furan.

A practical synthesis of a novel oxabicyclo[6.2.1]undecenetriol useful as a medicinal chemistry scaffold has been developed starting from l‐ribose. The sequence involves an oxidation/Grignard addition sequence and a challenging ring‐closing metathesis (RCM) reaction as the ring forming step. Exploration of the RCM substrate protecting groups revealed the key factor for successful nine‐membered medium ring formation to be conformational bias of the reacting alkenes of the RCM substrate by very bulky silyl ether protecting groups. The synthesis also allowed access to an epimeric triol and saturated and unsaturated variants of the nine‐membered ring. The medium ring conformation of the oxabicyclo[6.2.1]undecenetriol was determined by X‐ray crystallography and correlated to the solution state conformation by NMR experiments.

The substrate scope of inverting alkylsulfatase Pisa1 was extended towards benzylic sec-sulfate esters by suppression of competing non-enzymatic autohydrolysis by addition of dimethyl sulfoxide as co-solvent. Detailed investigation of the mechanism of autohydrolysis in 18O-labeled buffer by using an enantiopure sec-benzylic sulfate ester as substrate revealed that from the three possible pathways (i) inverting SN2-type nucleophilic attack of [OH–] at the benzylic carbon represents the major pathway, whereas (ii) SN1-type formation of a planar benzylic carbenium ion leading to racemization was a minor event, and (iii) Retaining SN2-type nucleophilic attack at sulfur took place at the limits of detection. The data obtained are interpreted by analysis of Hammett constants of meta substituents.

The tricyclic BCD substructure of the marine natural product nakadomarin A has been synthesised. The strategy utilised a key carbon–carbon bond-forming reaction between a furan and an N-acyliminium ion derived from a secondary thiolactam. In addition, a novel three-component coupling reaction between a thioamide, an allylic bromide and an isocyanate, leading to the establishment of two new stereogenic centres, is reported. Two key steps in a projected total synthesis of nakadomarin A have been realised by using the unique chemistry of thioamides. Formation of the carbocyclic B ring can be effected by nucleophilic attack of a furan on a thiolactam-derived iminium ion, and the key quaternary centre can be established by a novel three-component coupling reaction.

Saturated heterocycles, such as THFs, pyrrolidines, piperidines and THPs, are essential components of many biologically active compounds. Examples of C–H functionalization on these important ring systems remain scarce, especially at unactivated positions. Here we report the development of conditions for the palladium‐catalyzed stereoselective C(sp3)–H arylation at unactivated 3‐positions of 5‐ and 6‐membered N‐ and O‐heterocycles with aminoquinoline directing groups. Subtle differences in substrate structures altered their reactivity significantly; and different conditions were required to achieve high yields in each case. Successful conditions were developed using a short empirical optimization approach to cover reaction space with a limited set of variables. Excellent cis‐selectivity was achieved in all cases, except for the THP substrate where minor trans‐products were formed through a different palladacyclic intermediate. Here, differences in reactivity and selectivity with other directing groups were examined.

Enantiomerically pure (S)-tributylstannyl[D1]methanol and (R)- and (S)-tributylstannyl[D1]methyl benzoates were Stille-coupled with bromobenzene and benzoyl chloride in 1,4-dioxane and toluene using [(Ph3P)4Pd] or [(Ph3P)2PdCl2] either alone or in combination with CuCN as cocatalyst at temperatures up to 80 °C. The products were found to be enantiomerically pure. (R)- and (S)-N-(tributylstannyl[D1]methyl)phthalimides gave enantiomerically pure products with benzoyl chloride, but with bromobenzene protected phenyl[D1]methylamines gave products of only 52–69 % ee depending on the solvent used. Tributyl(thio[D1]methyl)stannanes could not be Stille-coupled with benzoyl chloride or with bromobenzene. Similarly, dimethyl phenyl[D1]methylboronate underwent a Suzuki–Miyaura coupling with bromobenzene to give phenyl[D1]methylsilane with 99 % ee. All couplings followed a retentive course and, except in one case, the intermediate [XCHDPdLn] complexes were found to be microscopically configurationally stable.

The ruthenium(II)-catalyzed sp3 C–H bond arylation of benzylic amines with aryl halides is reported. In the present method, aryl iodides and, more importantly, also the cheaper aryl bromides and aryl chlorides can be applied as aryl sources. Additionally, the method does not require elaborate manipulations in a glove box and can be carried out in simple screw cap vials. Potassium pivalate proved to be beneficial for the transformation with aryl bromides or iodides as aryl source, but was not required for aryl chlorides. In the latter case, the addition of PPh3 led to high conversion. 3-Methyl and 3-phenyl pyridine were established as directing groups, and the substituent in the 3-position represents a key structural feature for high conversion. The directing group can be cleaved after the transformation, which allows access to diarylmethylamines. Mechanistic studies were carried out and critically compared to mechanistic reports of related transformations.

Disaccharides that contain 3-deoxy-d-manno-oct-2-ulosonic acid (Kdo) and d-glycero-d-talo-oct-2-ulosonic acid (Ko) substituted at the 8-position by 4-amino-4-deoxy-β-l-arabinopyranosyl (Ara4N) residues have been prepared. Coupling an N-phenyltrifluoroacetimidate-4-azido-4-deoxy-l-arabinosylglycosyl donor to acetyl-protected allyl glycosides of Kdo and Ko afforded anomeric mixtures of disaccharide products in 74 and 90 % yield, respectively, which were separated by chromatography. Further extension of an intermediate Ara4N-(1→8)-Kdo disaccharide acceptor, which capitalized on a regioselective glycosylation with a Kdo bromide donor under Helferich conditions, afforded the branched trisaccharide α-Kdo-(2→4)[β-l-Ara4N-(1→8)]-α-Kdo derivative. Deprotection of the protected di- and trisaccharide allyl glycosides was accomplished by TiCl4-promoted benzyl ether cleavage followed by the removal of ester groups and reduction of the azido group with thiol or Staudinger reagents, respectively. The reaction of the anomeric allyl group with 1,3-propanedithiol under radical conditions afforded the thioether-bridged spacer glycosides, which were efficiently coupled to maleimide-activated bovine serum albumin. The neoglycoconjugates serve as immunoreagents with specificity for inner core epitopes of Burkholderia and Proteus lipopolysaccharides.

The higher-carbon sugar l-glycero-d-manno-heptose is a major constituent of the inner core region of the lipopolysaccharide (LPS) of many Gram-negative bacteria. All preparative routes used to date require multiple steps, and scalability has been rarely addressed. Here a highly practical synthesis of crystalline 1,2,3,4,6,7-hexa-O-acetyl-l-glycero-α-d-manno-heptopyranose by a simple four-step sequence starting from l-lyxose is disclosed. Only two recrystallisations are required and the process was demonstrated on a >100 mmol scale, yielding 41 g of the target compound.

A short and efficient total synthesis of the alkaloid isosolenopsin and its enantiomer has been achieved. The key step was a ω-transaminase-catalysed regioselective monoamination of the diketone pentadecane-2,6-dione, which was obtained in a single step through the application of a Grignard reaction. Initial low conversions in the biotransformation could be overcome by optimisation of the reaction conditions employing suitable cosolvents. In the presence of 20 vol.-% N,N-dimethylformamide (DMF) or n-heptane the best results were obtained by employing two enantiocomplementary ω-transaminases originating from Arthrobacter at 30–40 °C; under these conditions, conversions of more than 99 % and perfect stereocontrol (ee > 99 %) were achieved. Diastereoselective chemical reduction (H2/Pd/C) of the biocatalytic product gave the target compound. The linear three-step synthesis provided the natural product isosolenopsin in diastereomerically pure form (ee > 99 %, dr = 99:1) with an overall yield of 64 %.

A total synthesis of paroxetine is reported, with a diastereoselective and diastereoconvergent cobalt-catalysed sp3–sp2 coupling reaction involving a 3-substituted 4-bromo-N-Boc-piperidine (Boc = tert-butoxycarbonyl) substrate as a key step. A 9:1 diastereoselectivity was obtained, while a control experiment involving a conformationally locked 3-substituted 4-bromo-tert-butyl cyclohexane ring proceeded with essentially complete stereoselectivity.