Search

Abstract This work demonstrates a novel-type paper-based solid electrolyte (PBSE) and its application in Al-air battery, which is targeted for miniwatt applications. Benefited from the solid-form electrolyte, a liquid-free operation of the Al-air battery is realized, eliminating the potential leakage hazard and therefore improving the battery practicability. The PBSE is prepared by impregnating gel electrolyte into porous cellulose paper, followed by a solution casting process to solidify the gel. The as-prepared PBSE can either be used in mechanical rechargeable Al-air batteries, or be integrated into single-use flexible Al-air batteries. Currently the PBSE can achieve a moderate battery performance with a peak power density of 3.8 mW cm-2 and an Al specific capacity of 900.8 mA h g-1. Properties of the PBSE can be further improved by a comprehensive parametric study on its fabrication parameters, such as gel concentration, casting temperature, casting time, porosity and pore size of paper substrate, etc. [ABSTRACT FROM AUTHOR]

Abstract In remote areas, such as India, Africa and Southeast Asia, typically not connected to the natural gas distribution network, tissue paper production is currently carried out using a Yankee cylinder and two hot air hoods heated with saturated steam produced in conventional boilers. In this way the drying air is heated at medium temperature, around 160-180 °C, with consequent low levels of dried paper production. In this context, the present study intends to evaluate the technical and economic feasibility of using a wood biomass fixed bed downdraft gasification plant for the production of syngas to be used as fuel in gas hoods, in order to reach high drying temperatures (around 500 °C), comparable with those of the current modern hoods powered with natural gas. Using previously developed calculation codes, an evaluation of energy performance of the paper drying system and of the gasification plant has been performed. The present study also evaluates the possibility of applying a CHP plant, powered by biomass, for the production of steam and electric, this last obtained adopting a steam turbine, thus covering all the electrical and thermal needs of the paper mill. Results show that, for a paper mill with a production of about 80 t/day of paper, two gasification reactors with a thermal output of about 1.95 MWt, and a consumption of dry biomass of 0.86 t/h, are required. For the steam system, the net electric power needed to meet the needs of the paper mill is about 3100 kW with a consumption of 4.72 t/h of moist biomass and a net efficiency of 23.9 %. [ABSTRACT FROM AUTHOR]

Abstract: There is a large value in making Pulp and Paper mills more energy efficient. ABB has developed an energy assessment service where opportunities to save energy in the paper machine are identified. The energy assessment is done by quantifying energy flows, benchmarking energy users, data mining and steam sensitivity analysis and by experiments and additional measurements at the paper machine. Energy quantification helped in identifying main energy consumer, benchmarking was useful to assess the gap between operating performance and best performance whereas data mining and steam sensitivity analysis helped in studying the impact of key operating variables on performance of paper machines. After the assessment an action plan was presented to the mill for energy efficiency improvement together with a return on investment. [Copyright &y& Elsevier]

Abstract: Papermaking enterprises are major polluters that cause water pollution and air pollution. This paper aims to provide analysis of the energy saving and emission reduction in papermaking enterprises.It is the inevitable choice of establishment industrial ecology park as the leading of the papermaking industry by the implementation of cleaner production and circulation economy. Shandong Haiyun efficient ecological park is taken for example.Researches of the developing strategies and policy support of energy saving and emission reduction is discussed. The paper is divided into five parts, the first part is the preface, the second part introduces the general of Haiyun efficient industrial park, the third part puts forward the scheme of clean production of Haiyun efficient ecological industrial park, the fourth part puts forward ecological industry pattern of Haiyun efficient ecological industrial park, the fifth part puts forward policy guarantee measures, and the sixth part makes the summary. [Copyright &y& Elsevier]

This study aims to examine the economic and environmental benefits of recovered paper and potential contribution of the recovered paper to the Kingdom of Saudi Arabia (KSA) Vision 2030. The Vision 2030 is an inclusive development policy, recently launched, with the objectives to build the best future for the country. The Vision 2030 is based on three ambitious goals: making the country a vibrant society, a thriving economy and an ambitious nation. It is estimated that by 2030, 5.05 million ton of waste paper would be recovered in the country. About 11.3 billion SAR (US $3.01 billion) would be added to the country’s GDP and would create about 16,536 new jobs if the recovered paper industry is built in the country. Moreover, a net environmental benefit of 9.6 million crude barrel oil savings and 4.5 million ton of CO 2 savings from GHG emissions could be achieved by 2030 only from the paper waste recovery in the country. The potential benefits of paper waste recycling in KSA highlight the needs of effective measures to optimize the economic and environmental opportunities inherited in the waste paper industry. These measures should focus on capitalizing the local waste paper processing industry, restrict the export of raw waste paper materials, and enhance the waste paper collection process and quantity. [ABSTRACT FROM AUTHOR]

The purpose of this study is to identify the indicators needed to analyze the competitiveness of major countries' energy technologies and to conduct empirical analysis accordingly. In this paper, nine measurement variables were derived as an index centered on patents and papers for energy technology competitiveness analysis. For each of the nine set measurement variables, the index for each of the major energy technologies (photovoltaics, fuel cells, and secondary batteries) was calculated, compared, and analyzed for each of the eight major countries. [ABSTRACT FROM AUTHOR]

the production and expansion potential of Pulp and Paper Industry is an important indicator of social and economic development. The Pulp and Paper Industry is one of the largest carbon dioxide (CO 2 ) emitters in world manufacturing. The industry emits GHG emissions around 10% or approximately 20.5 Mt of CO 2 by Thai manufacturers. Investigations of GHG abatement using CO 2 Abatement Cost Curves (ACC) can be used as a tool for investigating GHG reduction measures and technologies in the Pulp and Paper Industry. The results of this study assesses the cost-effectiveness and the total technical potential for carbon dioxide emission reduction in this sector. [ABSTRACT FROM AUTHOR]

Green Energy efficiency is becoming more important because of the resulting cost reduction and image of green society which helps to enhance competitiveness in a globalized green market. Pulp and paper manufacturing is a large-scale industry which is generally regarded as important for national development. The Pulp and Paper industry consumes approximately 2.5% of total industrial energy consumption in Thailand by 44 factories distributed throughout the country. Therefore, energy efficiency improvement can play a significant role in the industry. Investigations of the cost effectiveness of energy efficiency measures and technologies using bottom-up Conservation Supply Curve (CSC) in the pulp and paper mill process are required. This study examines the concept, methodology, and the usefulness of the energy conservation supply curve, and the potential to create the appropriate energy policies to the Thai Pulp and Paper Industry. [ABSTRACT FROM AUTHOR]

The potential health and environmental impacts associated with the improper management of chemically treated wood waste demands the adoption of recycling, and disposal practices. Chemically treated wood waste has several physical and chemical properties which makes it usable for the manufacture of another product to multiple use, among which the production of paper and fuel. This paper presents the initial life cycle assessment (LCA) study on wood waste used for paper production. The study boundary is limited with raw materials (raw wood or waste wood) processing and paper production itself, thus corresponds to “gate-to-gate” life cycle with a special focus on life cycle inventory data on waste wood treatment via hydrolysis process. The results of the analysis demonstrate competitiveness of the waste wood use for paper production vs. raw wood in such environmental categories as human health and ecosystem quality. [ABSTRACT FROM AUTHOR]

During the building operation phase, it is recognized that the performance of building envelope elements and energy supply systems drops with time. This performance degradation usually leads to lower energy efficiency and higher life cycle costs than predicted in the early design phase. This paper quantitatively reviews the impacts of this deterioration on the whole building performance. From the findings of the reviewed literature, it can be concluded that the whole building performance is very sensitive to several deterioration factors, particularly the performance degradation of the heating, ventilation and air conditioning (HVAC) system. The impact on the whole building performance mostly ranges from 20% to 30% over 20 years, according to the reviewed studies. [ABSTRACT FROM AUTHOR]

In this study, the chopped carbon fibers and jute fibers were used to fabricate hybrid paperboard. The paper making process was used. Combined with unsaturated polyester resin, paperboard fiber reinforced plastic (FRP), carbon hybrid FRP and jute hybrid FRP were fabricated and the mechanical property included tensile test, bending test and Izod impact test were carried out to compared the mechanical property of these three kinds of materials. The drilled holes tensile test was also carried out to examine the drilled holes property. Scanning electron microscope was employed to observe the fracture characteristic on failure specimens. It was found due to the manufacture process of paperboard, the materials expressed obvious anisotropic property. The paperboard composite has an excellent static property but lower impact property compared with carbon hybrid FRP. [ABSTRACT FROM AUTHOR]

In this study, the chopped carbon fibers and jute fibers were used to fabricate hybrid paperboard. The paper making process was used. Combined with unsaturated polyester resin, paperboard fiber reinforced plastic (FRP), carbon hybrid FRP and jute hybrid FRP were fabricated and the mechanical property included tensile test, bending test and Izod impact test were carried out to compared the mechanical property of these three kinds of materials. The drilled holes tensile test was also carried out to examine the drilled holes property. Scanning electron microscope was employed to observe the fracture characteristic on failure specimens. It was found due to the manufacture process of paperboard, the materials expressed obvious anisotropic property. The paperboard composite has an excellent static property but lower impact property compared with carbon hybrid FRP. [ABSTRACT FROM AUTHOR]

Pulp and paper production is a highly energy intensive process and improvement of energy efficiency in this process is considered as promising measures for reducing industrial greenhouse gases emissions (GHG). This study focuses the Pakistan's pulp and paper industry which consumes around 7% of the country's industrial energy and contributes to over 317,269 tonnes of CO 2 emissions. With rising demands for fuels and consequently as harp increase in CO 2 emissions due to the growth of the paper sector in Pakistan, this article aims to analyse the energy efficiency and carbon dioxide emissions reductions potential through the incorporation of cogeneration technologies. The cogeneration technologies studied are agas turbine, steam turbine and combined cycle and are evaluated from the energetic and economic point of view to propose a best suitable technology for each paper mill. The proposed cogeneration technologies are selected on the basis of high energy utilisation factor, as implepayback period of five years or less with least Annualised life cycle cost. The result shows that a theoretical energy saving potential equivalent to 16.9% of the actual thermal energy requirement of mills can be achieved through cogeneration which will lead to 14.3% reduction of the present carbon emissions levels in Pakistan's paper sector. [ABSTRACT FROM AUTHOR]

In the era of climate change, life cycle analysis (LCA) has been acknowledged as a useful method for examining carbon footprints of products or services., Once captured and stored by trees and other plants, biogenic CO 2 would re-enter the atmosphere sooner or later after the use phase of the product. And many LCA studies did not calculate the temporary carbon storage in biogenic carbon. Thus, this paper proposed a hybrid LCA approach to provide a structured methodology for evaluating carbon footprint of copying paper in consideration of temporary carbon storage. The developed method was then applied to a paper mill of China. It is indicated that the hybrid LCA method could provide a comprehensive methodology for accounting carbon footprints as well as assessing effects of delaying GHG emissions. The results shows that the carbon footprint of 1000 kg copying paper was 647.89 kg CO 2 under scenario 1 and -5094 kg CO 2 under scenario 2. Concurrently, the effect of delaying the emission of the temporarily stored carbon in copying paper was 7.67%, 15.52%, or 23.58% for a certain period of time (i.e., 10, 25, or 30 years). [ABSTRACT FROM AUTHOR]

This paper presents the results of a preliminary assessment towards the potential estimation of solar process heating in paper industry in India. To begin with, data for (i) classification of paper mills on the basis of size and feedstock used (ii) extent of cogeneration in paper mills (iii) annual paper production (feed stock wise) (iv) specific thermal energy requirement for process heating etc. have been collected. Annual process heating requirement for paper production (based on feed stock used) in paper mills in India has been estimated. Availability of adequate solar resource in different states of the country was assessed for potential estimation. Some commercially available solar collectors that can supply heat at required temperature of paper industry (50-250 0 C) have been selected and an assessment of their performance has been made. Majority of paper mills in India those are using agro residues and recycled fibers as raw feedstock are located in the states with adequate DNI availability (1900kWh/m 2 ). Annual process heating potential for the paper industry in India has been estimated at 43 PJ. [ABSTRACT FROM AUTHOR]

In this work, the performance assessment study is done on a paper mill using an in-house analytics tool capable of data mining. The tool proposes a generic methodology for performance analysis and then shows its application on an industrial multi-grade paper making process. The tool framework facilitates data preprocessing and data mining, configuration and calculation of key performance indices (KPIs), benchmarking and gap analysis for benefit estimation. It also helps in better performance visualization and identification of the root cause of variations in performance in paper mills. To illustrate the concept, key results from performance analysis study done on a paper machine are presented and suggested measures to improve performance are discussed. [ABSTRACT FROM AUTHOR]

At the present time, reliability and stability of electric power have been very important when it comes to electrical systems in any plants, especially in terms of distribution. Phoenix Pulp & Paper PCL (PPPC) in Khon Kaen, Thailand, is currently generating electric power about 90% of its current needed by themselves and buys the rest from Provincial Electricity Authority (PEA). Nonetheless, the protection system should be installed to protect the electrical bus when electrical generating process trips or breakdown. Otherwise, it would cause the shutdown of electrical system and lose all manufacturing. To protect electrical system, PPPC therefore has to use load shedding system for cutting the connection of the machines from the system within few minutes. Power flow of electric power from 115 kV PEA to 11 kV via 2 transformers of 115 kV/11 kV and PPPC's 3 generators are studied in this research by setting the real electric power (P), reactive electric power (Q), current (I) and voltage (V) in the protection relay of load shedding system of 11 kV switchboards. In addition, motor control panel, simulated by SKM Power Tools program, is investigated in this research work. The simulation results: P, Q, I and V will be divided into 4 cases: the trips from TG-PUC, TG2, TG3 (in-house generation) and the one from PEA. In the case that there is a trip from PEA electrical distribution, P, only generated from the first three generators in house, will be insufficient to cover the plant's electric need and require around 6,512 kW more. As a result, the machines would have to be stopped running. However, if there is a trip from its in-house generation (TG-PUC, TG2 and TG3) instead, some P can be directly received from PEA. Thus, the load shedding scheme is important to protect the blackout system from electrical system's trip in distribution. [ABSTRACT FROM AUTHOR]

Pulp and paper mills (PPMs) generate large amount of wastewater with high chemical oxygen demand (COD) concentration. Recently, anaerobic digestion receives much attention for the treatment of PPM wastewater. Through anaerobic digestion treatment, biogas can be generated and converted to bioenergy via combined heat and power (CHP). However, there are limited studies on the systematic allocation of bioenergy from CHP to wastewater treatment (WWT) and PPM to form an integrated pulp and paper biorefinery (IPPB). Therefore, the current work explores the potential of energy integration in an IPPB through a two-stage optimization approach. In the first stage, an optimal cost effective WWT for the treatment of PPM wastewater is synthesized. Next, the generated biogas from WWT is converted into four different forms of bioenergy. The detail allocation of the generated bioenergy is then determined in the second stage optimization. A case study is solved to illustrate the proposed approach. [ABSTRACT FROM AUTHOR]

Abstract: Based on energy flow characteristics of the paper machine drying section, the dryer section can be divided into network. The Agents applied for the proxy of energy network node. A collaboration approach based on an extended contract net protocol for dryer section energy networks of paper machine is presented, applied for Multi-level negotiation protocol to solve distribution of energy allocation and use of conflict that exist in energy used in paper machine dryer section, in which the trust degree, threshold, and priority are introduced into the classical contract net protocol. This approach resolves energy distribution conflict in the dryer section network through bidding, game theory between the central control Agents and node Agents. [Copyright &y& Elsevier]

Fiber reinforced plastic composite (FRP) has gained remarkable development because of its excellent properties, such as low density, high stiffness, high strength, corrosion resistance, long fatigue life, and so on. However, as more and more products made of FRP, the rubbish of FRP is also increasing which has become an important problem to the environment. Recycling and reusing is a noticeable method to reduce trash discharge and to save resource. Although it is a more challenging work for FRP, many researchers have report their scores in this area, such as the group from The University of Nottingham who have developed a new technology to recycle the carbon fiber. The objective of this research is to make short fiber mat from recycled carbon fiber by paperboard making method. In this method the fiber can be made into very thin layers and be laid into mat. After that the mats were used to fabricate FRP and the tensile property of the materials was investigated. The property was evaluated between recycled carbon fiber and jute fiber as well as hybrid one. It was found that the hybrid one has better performance. [ABSTRACT FROM AUTHOR]

Abstract: The constitutive relations of the mass loaded paper honeycomb panel is expressed as a linear differential equation. Using the Laplace transform method, we can model the paper honeycomb panel as a linear material with viscoelastic property, the relaxation kernel is expressed as the sum of complex exponentials. A parameters identification method is formulated using the substitute method. A free response experiment system is set up, the free response data are recorded and used to identify the stiffness and damping coefficients as well as the viscoelastic parameters. The identified parameters of the model under different honeycomb core height condition are given in this paper. The model and the identified parameters can be used to simulate the vibration transmissibility of the mass loaded paper honeycomb panel. The response of the system excited by the harmonic inputs is calculated using the one-term harmonic balance method. The comparison of the simulated transmissibility curve and the experimental data indicates that the model presented in this paper is accurate, the parameters presented can be used to predict the vibration transmissibility property of the mass loaded paper honeycomb panel system. [Copyright &y& Elsevier]

Abstract: A new approach of paper defect recognition is proposed. To implement this method, computer is used to acquire paper image and the subtraction algorithm is used to determine if the image contains defect at first. For the image with paper defect, wavelet packet decomposition is applied to extracting the feature vector of the defect. A BP neural network is designed for recognizing the defect type according to the feature vector. This approach provides a unified detection algorithm for different types of paper defects. The experiment data prove this method is valid and can be applied in modern paper defect inspection system. [Copyright &y& Elsevier]

Abstract: Currently, the light has shed on the ecological-friendly products. The mulberry products, especially hand-made paper, are wildly facilitated as general wares or decoration. The research on the lamination of the mulberry paper with biodegradable films can ameliorate the usability, corresponding to the modernisation and green products. Meticulously, the laminating machine is designed and created in this research, with the size 98 x 118 x 126 centimetres. The machine is consisted of the roller driver and the infrared heater. The laminate film will be pulled by the roller driver and be passed the latex glue and infrared heater. Subsequently, the film will be coated on the mulberry paper by the rubber roller. The experimental results show that the best lamination is at speed 3.72 m/min. In addition, the biodegradable film has thickness 40μm and tensile strength is 40.22MPa. Tensile strength of normal mulberry paper is 37.07MPa, but 79.14MPa after the lamination. The laminated mulberry-paper is more attractive, strengthening, and lotus effect. The surface becomes smooth, easily to print and to clean out the dirt. [Copyright &y& Elsevier]

Abstract: A lot of work has been done in the field of multi-valued model checking home and abroad. But some research works are not perfect. Some problems in the semantic definitions of temporal operators and corresponding model checking algorithms are found in the paper “Model Checking Using Partial Kripke Structure with 3-Valued Temporal Logic”. Some counterexamples are given to show these errors. On the basis of the discussion, some sound semantic definitions of temporal operators and correct algorithms of model checking for some temporal operators are given. [Copyright &y& Elsevier]

Abstract: Combining previous image mosaicing algorithms, this paper puts forward a kind of damaged text restore image processing algorithm. The algorithm can restore the shredder pieces tape. A series of tapes which are obtained by scanner are treated through image processing such as binary, segmentation, denoising and enhancement and so on, Then we can get the ideal original text image from some leaflet tapes image. Experimental results show that such algorithm has certain effectiveness. [Copyright &y& Elsevier]