Search

Abstract: The electrode of array of CuO nanosheet is prepared via a template-free growth method, and it is doped by Ag via the silver mirror reaction. The morphology of Ag-doped CuO nanosheet is examined by scanning electron microscopy. The phase structure of the Ag-doped CuO nanosheet is analyzed by X-ray diffraction spectroscopy. The supercapacitance behavior of Ag-doped CuO nanosheet is investigated by cyclic voltammetry, galvanostatic charge/discharge test and electrochemical impedance spectroscopy. The results show that the thickness of a single nanosheet is up to around 150nm. The specific capacitance of the Ag-doped CuO nanosheet electrode is 689Fg−1 at 1Ag−1 and 299Fg−1 at 10Ag−1, respectively, much higher than that of the unmodified CuO nanosheet arrays (418Fg−1 at 1Ag−1 and 127Fg−1 at 10Ag−1). The improved capacitance is explained in terms of the presence of dispersed Ag particle coated the CuO nanosheet arrays having good electrical conductivity. [Copyright &y& Elsevier]

In this work, for the first time, we design a high-energy-density double-chamber capacitor which consists of the cathode chamber (polyaniline@carbon fiber cloth electrode in HCl/FeCl 3 solution), anion-exchange membrane and the anode chamber (polyaniline@carbon fiber cloth electrode in HCl/FeCl 2 solution). Since the redox state of polyaniline can be continuously altered by the external potential during charging and discharging process, the addition of FeCl 3 (or FeCl 2 ) in the electrolyte works as chemical oxidant (or reductant) to oxidize (or reduce) the reduced (or oxidized) polyaniline to offer extended capacitance. Results show the double-chamber supercapacitor has a high area specific capacitance of 1.22 F cm −2 and an energy density of 108.44 μWh cm −2 , which are ∼3.5 times as large as those of the conventional single-chamber capacitor (0.35 F cm −2 / 31.11 μWh cm −2 ). This work demonstrates an innovative strategy by incorporating supercapacitor with fuel cell to improve the energy density. [ABSTRACT FROM AUTHOR]

Carbon materials, especially graphene nanosheets (GNS) and/or multi-walled carbon nanotube (MWNT), have been widely used as electrode materials for supercapacitor due to their advantages of higher specific surface area and electronic conductivity, but the relatively low specific capacitance thus results in low energy density hindering their large applications. On the contrary, MnO 2 exhibits higher energy density but poor electrical conductivity. In order to obtain high performance supercapacitor electrode, here, combining the advantages of these materials, we have designed a facile two-step strategy to prepare 3D MnO 2 -GNS-MWNT-Ni foam (MnO 2 -GM-Ni) electrode. First, GNS and MWNT is wrapped on the surface of Ni foam (GM-Ni) via a “dip & dry” method by using an organic dye as a co-dispersant. Then, by using this 3D GM-Ni as substrate, MnO 2 nanoflakes are in-situ supporting on the surface of GNS and MWNT through a hydrothermal reaction. The specific capacitances of MnO 2 -GM-Ni electrode reach as high as 470.5 F g −1 at 1 A g −1 . Furthermore, we have successfully fabricated an asymmetric supercapacitor with MnO 2 -GM-Ni and GM-Ni as the positive and negative electrodes, respectively. The MnO 2 -GM-Ni//GM-Ni asymmetric supercapacitor exhibits a maximum energy density of 35.3 Wh kg −1 at a power density of 426 W kg −1 and also a favorable cycling performance that 83.8% capacitance retention after 5000 cycles. These results show manageable and high-performance which offer promising future for practical applications. [ABSTRACT FROM AUTHOR]

Facile in-situ etching current collector prepares corresponding oxide or sulfide, which is directly used as faradic electrode material, supplying faster electron transportation and better connection, and thus displaying good supercapacitor performance. Here, we prepare Cu x S via etching copper foam and investigate the influence of etching time on the morphology and electrochemical performance. The results show that compared with the nano-rod Cu x S-1h/CF, nano-rod/wire Cu x S-2h/CF and block/nanorod Cu x S-4h/CF, the nano-rod/ribbon Cu x S-3h/CF electrode exhibits the highest specific capacity (448.8C g −1 at current density of 5 mA cm −2 ). We fabricate asymmetric supercapacitor based on Cu x S-3h/CF as positive electrode and AC as negative electrode to further evaluate the supercapacitor property and the device achieves a high energy density of 35 Wh kg −1 at power density of 266 W kg −1 . Furthermore, the outstanding cycling stability of 88% capacitance retention after 5000 charge-discharge cycles more enable the Cu x S-3h/CF become promising faradic electrode material. [ABSTRACT FROM AUTHOR]

Highlights: [•] MnO2/C/TiO2 shell/shell/core arrays electrode has been prepared by simple thermal reaction and electrodeposition method. [•] The unique shell/shell/core structure has easy access of electrolyte ions, large surface to volume and high electrochemical activity. [•] The MnO2/C/TiO2 shell/shell/core arrays exhibits high specific capacitance of 639 F g−1 at a charge/discharge current density of 1 A g−1. [ABSTRACT FROM AUTHOR]

Abstract: Nanostructured CuO with diverse morphology was directly grown on copper foam. Their supercapacitance performance was investigated and correlated with the morphology. CuO nanowires, nanosheets, and flower-like nanostructures were formed on copper foam which acts as both the substrate of CuO formation and the current collector of the electrode. Their morphology was examined by scanning and transmission electron microscopy and their phase structure was analyzed by X-ray diffraction spectroscopy. The supercapacitance of the nanostructured CuO on copper foam was investigated by cyclic voltammetry, galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy. Results showed that the specific capacitance of the nanostructured CuO strongly depends on its morphology and dimension. CuO nanosheets exhibited higher specific capacitance than nanowires and flower-like nanostructure. The specific capacitance of the CuO nanosheets reached 212Fg−1 at a current density of 0.41mAmg−1 in 6.0moldm−3 KOH electrolyte. The capacitance loss is around 15% after 850 charge/discharge cycles at 0.41mAmg−1 and the majority of capacitance loss occurred in the initial 50 cycles (8.1%). [Copyright &y& Elsevier]

Bimetallic metal selenides have gained increasing attention as potential electrode materials for energy storage systems owing to good electrical conductivity and superior electrochemical activity. Herein, the Ni x Co y Se 2 (x+y=1) electrodes are prepared by a facile and rapid electrodeposition process. The electrochemical performance is optimized via adjusting the ratio of Co and Ni. It is turned out that equivalent Co and Ni in the composite (Ni 1/2 Co 1/2 Se 2) shows the best supercapacitor performance, including high specific capacity (166.1 mAh g−1) and long-term stability. Moreover, Density Functional Theory (DFT) calculation confirms the covalent interaction between nickel and cobalt, implying the existence of synergistic effect. To assess the practical value of the rationally designed Ni 1/2 Co 1/2 Se 2 electrode material, an asymmetric supercapacitor device is fabricated (Ni 1/2 Co 1/2 Se 2 //AC), which delivers a high energy density of 46.0 Wh kg−1 at 1141 W kg−1, coupled with 9.8% capacity loss after 10000 cycles. Notably, the low-voltage setups (LED and electric fan) can be easily activated by two devices in series, further demonstrating the great potential for practical application of Ni 1/2 Co 1/2 Se 2 electrode. [ABSTRACT FROM AUTHOR]