Search

Ultra-high intensity femtosecond lasers have now become excellent scientific tools for the study of extreme material states in small-scale laboratory settings. The invention of chirped-pulse amplification (CPA) combined with titanium-doped sapphire (Ti:sapphire) crystals have enabled realization of such lasers. The pursuit of ultra-high intensity science and applications is driving worldwide development of new capabilities. A petawatt (PW = 1015 W), femtosecond (fs = 10&minus, 15 s), repetitive (0.1 Hz), high beam quality J-KAREN-P (Japan Kansai Advanced Relativistic ENgineering Petawatt) Ti:sapphire CPA laser has been recently constructed and used for accelerating charged particles (ions and electrons) and generating coherent and incoherent ultra-short-pulse, high-energy photon (X-ray) radiation. Ultra-high intensities of 1022 W/cm2 with high temporal contrast of 10&minus, 12 and a minimal number of pre-pulses on target has been demonstrated with the J-KAREN-P laser. Here, worldwide ultra-high intensity laser development is summarized, the output performance and spatiotemporal quality improvement of the J-KAREN-P laser are described, and some experimental results are briefly introduced.

The importance of heat-resistant optics is increasing together with the average power of high-intensity lasers. A silicon carbide (SiC) ceramic with high thermal conductivity is proposed as an optics substrate to suppress thermal effects. The temperature rise of the substrate and the change in the surface accuracy of the mirror surface, which degrades the laser beam quality, are investigated. Gold mirrors on synthetic fused silica and SiC ceramic substrates are heated with a 532 nm wavelength laser diode. The synthetic fused silica substrate placed on an aluminum block shows a temperature increase by ~32 &deg, C and a large temperature gradient. In contrast, the SiC ceramic substrate shows a uniform temperature distribution and a temperature increase of only ~4 &deg, C with an absorbed power of ~2 W after 20 min laser irradiation. The surface accuracy (roughness) when using the synthetic fused silica substrate changes from /21.8 (29.0 nm) to /7.2 (88.0 nm), increasing by a factor of ~3.0. However, that of the SiC ceramic substrate changes from /21.0 (30.2 nm) to /13.3 (47.7 nm), increasing by only a factor of ~1.6. Based on these experimental results, detailed considerations and calculations of actively cooled SiC ceramic substrates for high-average-power laser systems are also discussed.

The interaction of high-intensity laser pulses with solid targets can be used as a highly charged, energetic heavy ion source. Normally, intrinsic contaminants on the target surface suppress the performance of heavy ion acceleration from a high-intensity laser–target interaction, resulting in preferential proton acceleration. Here, we demonstrate that CW laser heating of 5 μm titanium tape targets can remove contaminant hydrocarbons in order to expose a thin oxide layer on the metal surface, ideal for the generation of energetic oxygen beams. This is demonstrated by irradiating the heated targets with a PW class high-power laser at an intensity of 5 × 10^21 W/cm2, showing enhanced acceleration of oxygen ions with a non-thermal-like distribution. Our new scheme using a CW laser-heated Ti tape target is promising for use as a moderate repetition energetic oxygen ion source for future applications.